Probe #d4eba09088 of Samsung 270E5G
Log: xorg.log.1
[ 51.404] (--) Log file renamed from "/var/log/Xorg.pid-1133.log" to "/var/log/Xorg.0.log"
[ 51.419]
X.Org X Server 1.21.1.11
X Protocol Version 11, Revision 0
[ 51.420] Current Operating System: Linux XXX 6.8.0-48-generic #48-Ubuntu SMP PREEMPT_DYNAMIC Fri Sep 27 14:04:52 UTC 2024 x86_64
[ 51.420] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-6.8.0-48-generic root=UUID=HASH_AAA-69EA-E093-EC15-0FE59BE0A69F ro quiet splash
[ 51.420] xorg-server 2:21.1.12-1ubuntu1.1 (For technical support please see http://www.ubuntu.com/support)
[ 51.420] Current version of pixman: 0.42.2
[ 51.420] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 51.420] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 51.420] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Nov 11 16:01:29 2024
[ 51.451] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 51.451] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 51.498] (==) No Layout section. Using the first Screen section.
[ 51.498] (==) No screen section available. Using defaults.
[ 51.498] (**) |-->Screen "Default Screen Section" (0)
[ 51.498] (**) | |-->Monitor "<default monitor>"
[ 51.520] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 51.520] (**) Allowing byte-swapped clients
[ 51.520] (==) Automatically adding devices
[ 51.520] (==) Automatically enabling devices
[ 51.520] (==) Automatically adding GPU devices
[ 51.520] (==) Automatically binding GPU devices
[ 51.520] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 51.538] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 51.538] Entry deleted from font path.
[ 51.538] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[ 51.538] Entry deleted from font path.
[ 51.538] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[ 51.538] Entry deleted from font path.
[ 51.546] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[ 51.546] Entry deleted from font path.
[ 51.546] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[ 51.546] Entry deleted from font path.
[ 51.546] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/Type1,
built-ins
[ 51.546] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 51.546] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 51.546] (II) Loader magic: 0x58d091c33020
[ 51.546] (II) Module ABI versions:
[ 51.546] X.Org ANSI C Emulation: 0.4
[ 51.546] X.Org Video Driver: 25.2
[ 51.546] X.Org XInput driver : 24.4
[ 51.546] X.Org Server Extension : 10.0
[ 51.548] (++) using VT number 2
[ 51.548] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[ 51.550] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 51.550] (II) Platform probe for /sys/devices/pci0000:00/0000:00:02.0/drm/card0
[ 51.572] (--) PCI:*(0@0:2:0) 8086:0166:144d:c736 rev 9, Mem @ 0xf0000000/4194304, 0xe0000000/268435456, I/O @ 0x00003000/64, BIOS @ 0x????????/131072
[ 51.584] (II) LoadModule: "glx"
[ 51.594] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 51.691] (II) Module glx: vendor="X.Org Foundation"
[ 51.691] compiled for 1.21.1.11, module version = 1.0.0
[ 51.691] ABI class: X.Org Server Extension, version 10.0
[ 51.691] (==) Matched modesetting as autoconfigured driver 0
[ 51.691] (==) Matched fbdev as autoconfigured driver 1
[ 51.691] (==) Matched vesa as autoconfigured driver 2
[ 51.691] (==) Assigned the driver to the xf86ConfigLayout
[ 51.691] (II) LoadModule: "modesetting"
[ 51.691] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 51.716] (II) Module modesetting: vendor="X.Org Foundation"
[ 51.716] compiled for 1.21.1.11, module version = 1.21.1
[ 51.716] Module class: X.Org Video Driver
[ 51.716] ABI class: X.Org Video Driver, version 25.2
[ 51.716] (II) LoadModule: "fbdev"
[ 51.716] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 51.732] (II) Module fbdev: vendor="X.Org Foundation"
[ 51.732] compiled for 1.21.1.11, module version = 0.5.0
[ 51.732] Module class: X.Org Video Driver
[ 51.732] ABI class: X.Org Video Driver, version 25.2
[ 51.732] (II) LoadModule: "vesa"
[ 51.732] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 51.733] (II) Module vesa: vendor="X.Org Foundation"
[ 51.733] compiled for 1.21.1.7, module version = 2.6.0
[ 51.733] Module class: X.Org Video Driver
[ 51.733] ABI class: X.Org Video Driver, version 25.2
[ 51.733] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 51.733] (II) FBDEV: driver for framebuffer: fbdev
[ 51.733] (II) VESA: driver for VESA chipsets: vesa
[ 51.769] (II) modeset(0): using drv /dev/dri/card0
[ 51.769] (WW) Falling back to old probe method for fbdev
[ 51.769] (II) Loading sub module "fbdevhw"
[ 51.769] (II) LoadModule: "fbdevhw"
[ 51.783] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 51.790] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 51.790] compiled for 1.21.1.11, module version = 0.0.2
[ 51.790] ABI class: X.Org Video Driver, version 25.2
[ 51.790] (II) modeset(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 51.790] (==) modeset(0): Depth 24, (==) framebuffer bpp 32
[ 51.790] (==) modeset(0): RGB weight 888
[ 51.790] (==) modeset(0): Default visual is TrueColor
[ 51.790] (II) Loading sub module "glamoregl"
[ 51.790] (II) LoadModule: "glamoregl"
[ 51.791] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 51.861] (II) Module glamoregl: vendor="X.Org Foundation"
[ 51.861] compiled for 1.21.1.11, module version = 1.0.1
[ 51.861] ABI class: X.Org ANSI C Emulation, version 0.4
[ 54.592] (II) modeset(0): glamor X acceleration enabled on Mesa Intel(R) HD Graphics 4000 (IVB GT2)
[ 54.592] (II) modeset(0): glamor initialized
[ 54.592] (==) modeset(0): VariableRefresh: disabled
[ 54.592] (==) modeset(0): AsyncFlipSecondaries: disabled
[ 54.592] (II) modeset(0): Output LVDS-1 has no monitor section
[ 54.594] (II) modeset(0): Output VGA-1 has no monitor section
[ 54.620] (II) modeset(0): Output HDMI-1 has no monitor section
[ 54.727] (II) modeset(0): Output DP-1 has no monitor section
[ 54.728] (II) modeset(0): EDID for output LVDS-1
[ 54.728] (II) modeset(0): Manufacturer: SEC Model: 384a Serial#: ...
[ 54.728] (II) modeset(0): Year: 2011 Week: 0
[ 54.728] (II) modeset(0): EDID Version: 1.3
[ 54.728] (II) modeset(0): Digital Display Input
[ 54.728] (II) modeset(0): Max Image Size [cm]: horiz.: 34 vert.: 19
[ 54.728] (II) modeset(0): Gamma: 2.20
[ 54.728] (II) modeset(0): No DPMS capabilities specified
[ 54.728] (II) modeset(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 54.728] (II) modeset(0): First detailed timing is preferred mode
[ 54.728] (II) modeset(0): redX: 0.615 redY: 0.355 greenX: 0.355 greenY: 0.610
[ 54.728] (II) modeset(0): blueX: 0.150 blueY: 0.100 whiteX: 0.313 whiteY: 0.329
[ 54.728] (II) modeset(0): Manufacturer's mask: 0
[ 54.728] (II) modeset(0): Supported detailed timing:
[ 54.728] (II) modeset(0): clock: 70.7 MHz Image Size: 344 x 194 mm
[ 54.728] (II) modeset(0): h_active: 1366 h_sync: 1414 h_sync_end 1446 h_blank_end 1486 h_border: 0
[ 54.729] (II) modeset(0): v_active: 768 v_sync: 770 v_sync_end 775 v_blanking: 792 v_border: 0
[ 54.729] (II) modeset(0): Unknown vendor-specific block f
[ 54.729] (II) modeset(0): SAMSUNG
[ 54.729] (II) modeset(0): LTN156AT248
[ 54.729] (II) modeset(0): EDID (in hex):
[ 54.729] (II) modeset(0): 00ffffffffffff004ca34a3800000000
[ 54.729] (II) modeset(0): 00150103802213780a81a59d5b5b9c26
[ 54.729] (II) modeset(0): 19505400000001010101010101010101
[ 54.729] (II) modeset(0): 0101010101019e1b5678500018303020
[ 54.729] (II) modeset(0): 250058c2100000190000000f00000000
[ 54.729] (II) modeset(0): 00000000001eb4021500000000fe0053
[ 54.729] (II) modeset(0): 414d53554e470a2020202020000000fe
[ 54.729] (II) modeset(0): 004c544e31353641543234380a2000c3
[ 54.729] (II) modeset(0): Printing probed modes for output LVDS-1
[ 54.729] (II) modeset(0): Modeline "1366x768"x60.1 70.70 1366 1414 1446 1486 768 770 775 792 -hsync -vsync (47.6 kHz eP)
[ 54.729] (II) modeset(0): Modeline "1280x720"x60.1 64.10 1280 1328 1360 1440 720 723 728 741 +hsync -vsync (44.5 kHz d)
[ 54.729] (II) modeset(0): Modeline "1024x768"x60.1 65.07 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
[ 54.729] (II) modeset(0): Modeline "960x720"x60.1 117.14 960 1024 1128 1300 720 720 722 750 doublescan -hsync +vsync (90.1 kHz d)
[ 54.729] (II) modeset(0): Modeline "928x696"x60.1 109.19 928 976 1088 1264 696 696 698 719 doublescan -hsync +vsync (86.4 kHz d)
[ 54.729] (II) modeset(0): Modeline "896x672"x60.1 102.50 896 960 1060 1224 672 672 674 697 doublescan -hsync +vsync (83.7 kHz d)
[ 54.729] (II) modeset(0): Modeline "1024x576"x60.1 42.18 1024 1072 1104 1184 576 579 584 593 +hsync -vsync (35.6 kHz d)
[ 54.730] (II) modeset(0): Modeline "960x600"x60.1 77.09 960 984 1000 1040 600 601 604 617 doublescan +hsync -vsync (74.1 kHz d)
[ 54.730] (II) modeset(0): Modeline "960x540"x60.1 37.41 960 1008 1040 1120 540 543 548 556 +hsync -vsync (33.4 kHz d)
[ 54.730] (II) modeset(0): Modeline "800x600"x60.1 38.45 800 824 896 1024 600 601 603 625 +hsync +vsync (37.5 kHz d)
[ 54.730] (II) modeset(0): Modeline "840x525"x60.1 59.69 840 864 880 920 525 526 529 540 doublescan +hsync -vsync (64.9 kHz d)
[ 54.730] (II) modeset(0): Modeline "864x486"x60.1 30.76 864 912 944 1024 486 489 494 500 +hsync -vsync (30.0 kHz d)
[ 54.730] (II) modeset(0): Modeline "700x525"x60.1 61.10 700 744 820 940 525 526 532 541 doublescan +hsync +vsync (65.0 kHz d)
[ 54.730] (II) modeset(0): Modeline "800x450"x60.1 48.95 800 824 840 880 450 451 454 463 doublescan +hsync -vsync (55.6 kHz d)
[ 54.730] (II) modeset(0): Modeline "640x512"x60.1 54.05 640 664 720 844 512 512 514 533 doublescan +hsync +vsync (64.0 kHz d)
[ 54.730] (II) modeset(0): Modeline "700x450"x60.1 43.39 700 724 740 780 450 451 456 463 doublescan +hsync -vsync (55.6 kHz d)
[ 54.730] (II) modeset(0): Modeline "640x480"x60.1 25.23 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
[ 54.730] (II) modeset(0): Modeline "720x405"x60.1 22.15 720 768 800 880 405 408 413 419 +hsync -vsync (25.2 kHz d)
[ 54.730] (II) modeset(0): Modeline "684x384"x60.1 36.26 684 708 724 764 384 385 390 395 doublescan +hsync -vsync (47.5 kHz d)
[ 54.730] (II) modeset(0): Modeline "640x360"x60.1 17.97 640 688 720 800 360 363 368 374 +hsync -vsync (22.5 kHz d)
[ 54.730] (II) modeset(0): Modeline "512x384"x60.1 32.54 512 524 592 672 384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)
[ 54.730] (II) modeset(0): Modeline "512x288"x60.1 21.05 512 536 552 592 288 289 292 296 doublescan +hsync -vsync (35.6 kHz d)
[ 54.730] (II) modeset(0): Modeline "480x270"x60.1 18.70 480 504 520 560 270 271 274 278 doublescan +hsync -vsync (33.4 kHz d)
[ 54.730] (II) modeset(0): Modeline "400x300"x60.1 19.19 400 412 448 512 300 300 301 312 doublescan +hsync +vsync (37.5 kHz d)
[ 54.730] (II) modeset(0): Modeline "432x243"x60.1 15.38 432 456 472 512 243 244 247 250 doublescan +hsync -vsync (30.0 kHz d)
[ 54.730] (II) modeset(0): Modeline "320x240"x60.1 12.59 320 328 376 400 240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)
[ 54.730] (II) modeset(0): Modeline "360x202"x60.1 11.05 360 384 400 440 202 204 206 209 doublescan +hsync -vsync (25.1 kHz d)
[ 54.730] (II) modeset(0): Modeline "320x180"x60.1 8.99 320 344 360 400 180 181 184 187 doublescan +hsync -vsync (22.5 kHz d)
[ 54.731] (II) modeset(0): EDID for output VGA-1
[ 54.758] (II) modeset(0): EDID for output HDMI-1
[ 54.758] (II) modeset(0): Manufacturer: GDH Model: 30 Serial#: ...
[ 54.758] (II) modeset(0): Year: 2017 Week: 20
[ 54.758] (II) modeset(0): EDID Version: 1.3
[ 54.758] (II) modeset(0): Digital Display Input
[ 54.758] (II) modeset(0): Max Image Size [cm]: horiz.: 115 vert.: 65
[ 54.758] (II) modeset(0): Gamma: 2.20
[ 54.758] (II) modeset(0): No DPMS capabilities specified
[ 54.758] (II) modeset(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 54.758] (II) modeset(0): First detailed timing is preferred mode
[ 54.758] (II) modeset(0): redX: 0.640 redY: 0.340 greenX: 0.300 greenY: 0.690
[ 54.758] (II) modeset(0): blueX: 0.138 blueY: 0.038 whiteX: 0.282 whiteY: 0.297
[ 54.758] (II) modeset(0): Supported established timings:
[ 54.758] (II) modeset(0): 640x480@60Hz
[ 54.758] (II) modeset(0): 800x600@60Hz
[ 54.758] (II) modeset(0): 1024x768@60Hz
[ 54.758] (II) modeset(0): Manufacturer's mask: 0
[ 54.758] (II) modeset(0): Supported standard timings:
[ 54.758] (II) modeset(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 54.758] (II) modeset(0): #1: hsize: 800 vsize 600 refresh: 60 vid: 16453
[ 54.758] (II) modeset(0): #2: hsize: 1024 vsize 768 refresh: 60 vid: 16481
[ 54.758] (II) modeset(0): #3: hsize: 1440 vsize 900 refresh: 60 vid: 149
[ 54.758] (II) modeset(0): Supported detailed timing:
[ 54.758] (II) modeset(0): clock: 148.5 MHz Image Size: 708 x 398 mm
[ 54.758] (II) modeset(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
[ 54.758] (II) modeset(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
[ 54.758] (II) modeset(0): Supported detailed timing:
[ 54.758] (II) modeset(0): clock: 85.5 MHz Image Size: 708 x 398 mm
[ 54.758] (II) modeset(0): h_active: 1360 h_sync: 1424 h_sync_end 1536 h_blank_end 1792 h_border: 0
[ 54.758] (II) modeset(0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 795 v_border: 0
[ 54.758] (II) modeset(0): Monitor name: TV PHILCO
[ 54.758] (II) modeset(0): Ranges: V min: 50 V max: 75 Hz, H min: 30 H max: 80 kHz, PixClock max 235 MHz
[ 54.758] (II) modeset(0): Supported detailed timing:
[ 54.758] (II) modeset(0): clock: 27.0 MHz Image Size: 708 x 398 mm
[ 54.758] (II) modeset(0): h_active: 720 h_sync: 736 h_sync_end 798 h_blank_end 858 h_border: 0
[ 54.758] (II) modeset(0): v_active: 480 v_sync: 489 v_sync_end 495 v_blanking: 525 v_border: 0
[ 54.758] (II) modeset(0): Supported detailed timing:
[ 54.758] (II) modeset(0): clock: 27.0 MHz Image Size: 708 x 398 mm
[ 54.758] (II) modeset(0): h_active: 720 h_sync: 732 h_sync_end 796 h_blank_end 864 h_border: 0
[ 54.758] (II) modeset(0): v_active: 576 v_sync: 581 v_sync_end 586 v_blanking: 625 v_border: 0
[ 54.758] (II) modeset(0): Supported detailed timing:
[ 54.758] (II) modeset(0): clock: 74.2 MHz Image Size: 708 x 398 mm
[ 54.758] (II) modeset(0): h_active: 1280 h_sync: 1720 h_sync_end 1760 h_blank_end 1980 h_border: 0
[ 54.758] (II) modeset(0): v_active: 720 v_sync: 725 v_sync_end 730 v_blanking: 750 v_border: 0
[ 54.758] (II) modeset(0): Supported detailed timing:
[ 54.758] (II) modeset(0): clock: 74.2 MHz Image Size: 708 x 398 mm
[ 54.759] (II) modeset(0): h_active: 1920 h_sync: 2448 h_sync_end 2492 h_blank_end 2640 h_border: 0
[ 54.759] (II) modeset(0): v_active: 540 v_sync: 542 v_sync_end 547 v_blanking: 562 v_border: 0
[ 54.759] (II) modeset(0): Number of EDID sections to follow: 1
[ 54.759] (II) modeset(0): EDID (in hex):
[ 54.759] (II) modeset(0): 00ffffffffffff001c88300001000000
[ 54.759] (II) modeset(0): 141b0103807341780acf74a3574cb023
[ 54.759] (II) modeset(0): 09484c21080081804540614095000101
[ 54.759] (II) modeset(0): 010101010101023a801871382d40582c
[ 54.759] (II) modeset(0): 4500c48e2100001e662150b051001b30
[ 54.759] (II) modeset(0): 40703600c48e2100001e000000fc0054
[ 54.759] (II) modeset(0): 56205048494c434f20202020000000fd
[ 54.759] (II) modeset(0): 00324b1e5017000a20202020202001b5
[ 54.759] (II) modeset(0): 02032df24d010304050790121314169f
[ 54.759] (II) modeset(0): 20222909070711175057060083010000
[ 54.759] (II) modeset(0): 6c030c002000b82d00000000008c0ad0
[ 54.759] (II) modeset(0): 8a20e02d10103e9600c48e210000188c
[ 54.759] (II) modeset(0): 0ad090204031200c405500c48e210000
[ 54.759] (II) modeset(0): 18011d00bc52d01e20b8285540c48e21
[ 54.759] (II) modeset(0): 00001e011d80d0721c1620102c2580c4
[ 54.759] (II) modeset(0): 8e2100009e00000000000000000000cf
[ 54.759] (--) modeset(0): HDMI max TMDS frequency 225000KHz
[ 54.759] (II) modeset(0): Printing probed modes for output HDMI-1
[ 54.759] (II) modeset(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[ 54.759] (II) modeset(0): Modeline "1920x1080"x50.0 148.50 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (56.2 kHz e)
[ 54.759] (II) modeset(0): Modeline "1920x1080"x59.9 148.35 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.4 kHz e)
[ 54.759] (II) modeset(0): Modeline "1920x1080i"x60.0 74.25 1920 2008 2052 2200 1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz e)
[ 54.759] (II) modeset(0): Modeline "1920x1080i"x50.0 74.25 1920 2448 2492 2640 1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz e)
[ 54.759] (II) modeset(0): Modeline "1920x1080"x30.0 74.25 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (33.8 kHz e)
[ 54.759] (II) modeset(0): Modeline "1920x1080"x24.0 74.25 1920 2558 2602 2750 1080 1084 1089 1125 +hsync +vsync (27.0 kHz e)
[ 54.759] (II) modeset(0): Modeline "1920x1080i"x59.9 74.18 1920 2008 2052 2200 1080 1084 1094 1125 interlace +hsync +vsync (33.7 kHz e)
[ 54.759] (II) modeset(0): Modeline "1920x1080"x30.0 74.18 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (33.7 kHz e)
[ 54.759] (II) modeset(0): Modeline "1920x1080"x24.0 74.18 1920 2558 2602 2750 1080 1084 1089 1125 +hsync +vsync (27.0 kHz e)
[ 54.759] (II) modeset(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 54.759] (II) modeset(0): Modeline "1440x900"x59.9 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e)
[ 54.759] (II) modeset(0): Modeline "1360x768"x60.0 85.50 1360 1424 1536 1792 768 771 777 795 +hsync +vsync (47.7 kHz e)
[ 54.759] (II) modeset(0): Modeline "1280x720"x60.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
[ 54.759] (II) modeset(0): Modeline "1280x720"x50.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz e)
[ 54.759] (II) modeset(0): Modeline "1280x720"x59.9 74.18 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
[ 54.759] (II) modeset(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 54.759] (II) modeset(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 54.759] (II) modeset(0): Modeline "720x576"x50.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz e)
[ 54.759] (II) modeset(0): Modeline "720x576i"x50.0 13.50 720 732 795 864 576 580 586 625 interlace -hsync -vsync (15.6 kHz e)
[ 54.759] (II) modeset(0): Modeline "720x480"x60.0 27.03 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
[ 54.759] (II) modeset(0): Modeline "720x480"x59.9 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
[ 54.759] (II) modeset(0): Modeline "720x480i"x60.0 13.51 720 739 801 858 480 488 494 525 interlace -hsync -vsync (15.8 kHz e)
[ 54.759] (II) modeset(0): Modeline "720x480i"x59.9 13.50 720 739 801 858 480 488 494 525 interlace -hsync -vsync (15.7 kHz e)
[ 54.759] (II) modeset(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 54.759] (II) modeset(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 54.866] (II) modeset(0): EDID for output DP-1
[ 54.866] (II) modeset(0): Output LVDS-1 connected
[ 54.866] (II) modeset(0): Output VGA-1 disconnected
[ 54.866] (II) modeset(0): Output HDMI-1 connected
[ 54.866] (II) modeset(0): Output DP-1 disconnected
[ 54.866] (II) modeset(0): Using spanning desktop for initial modes
[ 54.866] (II) modeset(0): Output LVDS-1 using initial mode 1366x768 +0+0
[ 54.866] (II) modeset(0): Output HDMI-1 using initial mode 1920x1080 +1366+0
[ 54.866] (==) modeset(0): Using gamma correction (1.0, 1.0, 1.0)
[ 54.866] (==) modeset(0): DPI set to (96, 96)
[ 54.866] (II) Loading sub module "fb"
[ 54.866] (II) LoadModule: "fb"
[ 54.866] (II) Module "fb" already built-in
[ 54.866] (II) UnloadModule: "fbdev"
[ 54.867] (II) Unloading fbdev
[ 54.867] (II) UnloadSubModule: "fbdevhw"
[ 54.867] (II) Unloading fbdevhw
[ 54.867] (II) UnloadModule: "vesa"
[ 54.867] (II) Unloading vesa
[ 55.298] (==) modeset(0): Backing store enabled
[ 55.298] (==) modeset(0): Silken mouse enabled
[ 55.463] (II) modeset(0): Initializing kms color map for depth 24, 8 bpc.
[ 55.463] (==) modeset(0): DPMS enabled
[ 55.463] (II) modeset(0): [DRI2] Setup complete
[ 55.463] (II) modeset(0): [DRI2] DRI driver: crocus
[ 55.463] (II) modeset(0): [DRI2] VDPAU driver: va_gl
[ 55.463] (II) Initializing extension Generic Event Extension
[ 55.463] (II) Initializing extension SHAPE
[ 55.464] (II) Initializing extension MIT-SHM
[ 55.464] (II) Initializing extension XInputExtension
[ 55.477] (II) Initializing extension XTEST
[ 55.477] (II) Initializing extension BIG-REQUESTS
[ 55.478] (II) Initializing extension SYNC
[ 55.478] (II) Initializing extension XKEYBOARD
[ 55.478] (II) Initializing extension XC-MISC
[ 55.479] (II) Initializing extension SECURITY
[ 55.479] (II) Initializing extension XFIXES
[ 55.479] (II) Initializing extension RENDER
[ 55.480] (II) Initializing extension RANDR
[ 55.480] (II) Initializing extension COMPOSITE
[ 55.481] (II) Initializing extension DAMAGE
[ 55.481] (II) Initializing extension MIT-SCREEN-SAVER
[ 55.481] (II) Initializing extension DOUBLE-BUFFER
[ 55.481] (II) Initializing extension RECORD
[ 55.482] (II) Initializing extension DPMS
[ 55.482] (II) Initializing extension Present
[ 55.482] (II) Initializing extension DRI3
[ 55.482] (II) Initializing extension X-Resource
[ 55.483] (II) Initializing extension XVideo
[ 55.483] (II) Initializing extension XVideo-MotionCompensation
[ 55.483] (II) Initializing extension SELinux
[ 55.483] (II) SELinux: Disabled on system
[ 55.483] (II) Initializing extension GLX
[ 55.504] (II) AIGLX: Loaded and initialized crocus
[ 55.504] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 55.504] (II) Initializing extension XFree86-VidModeExtension
[ 55.505] (II) Initializing extension XFree86-DGA
[ 55.505] (II) Initializing extension XFree86-DRI
[ 55.505] (II) Initializing extension DRI2
[ 55.564] (II) modeset(0): Damage tracking initialized
[ 55.564] (II) modeset(0): Setting screen physical size to 869 x 285
[ 57.072] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 57.072] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 57.072] (**) Power Button: Applying InputClass "system-keyboard"
[ 57.072] (II) LoadModule: "libinput"
[ 57.073] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[ 57.113] (II) Module libinput: vendor="X.Org Foundation"
[ 57.113] compiled for 1.21.1.11, module version = 1.4.0
[ 57.113] Module class: X.Org XInput Driver
[ 57.113] ABI class: X.Org XInput driver, version 24.4
[ 57.113] (II) Using input driver 'libinput' for 'Power Button'
[ 57.113] (**) Power Button: always reports core events
[ 57.113] (**) Option "Device" "/dev/input/event2"
[ 57.146] (II) event2 - Power Button: is tagged by udev as: Keyboard
[ 57.147] (II) event2 - Power Button: device is a keyboard
[ 57.147] (II) event2 - Power Button: device removed
[ 57.156] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[ 57.156] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 57.156] (**) Option "xkb_model" "pc105"
[ 57.156] (**) Option "xkb_layout" "br"
[ 57.156] (WW) Option "xkb_variant" requires a string value
[ 57.203] (II) event2 - Power Button: is tagged by udev as: Keyboard
[ 57.203] (II) event2 - Power Button: device is a keyboard
[ 57.205] (II) config/udev: Adding input device Video Bus (/dev/input/event9)
[ 57.206] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[ 57.206] (**) Video Bus: Applying InputClass "system-keyboard"
[ 57.206] (II) Using input driver 'libinput' for 'Video Bus'
[ 57.206] (**) Video Bus: always reports core events
[ 57.206] (**) Option "Device" "/dev/input/event9"
[ 57.208] (II) event9 - Video Bus: is tagged by udev as: Keyboard
[ 57.208] (II) event9 - Video Bus: device is a keyboard
[ 57.209] (II) event9 - Video Bus: device removed
[ 57.226] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input10/event9"
[ 57.226] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 57.226] (**) Option "xkb_model" "pc105"
[ 57.226] (**) Option "xkb_layout" "br"
[ 57.226] (WW) Option "xkb_variant" requires a string value
[ 57.229] (II) event9 - Video Bus: is tagged by udev as: Keyboard
[ 57.230] (II) event9 - Video Bus: device is a keyboard
[ 57.231] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 57.231] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 57.231] (**) Power Button: Applying InputClass "system-keyboard"
[ 57.231] (II) Using input driver 'libinput' for 'Power Button'
[ 57.231] (**) Power Button: always reports core events
[ 57.231] (**) Option "Device" "/dev/input/event1"
[ 57.234] (II) event1 - Power Button: is tagged by udev as: Keyboard
[ 57.234] (II) event1 - Power Button: device is a keyboard
[ 57.234] (II) event1 - Power Button: device removed
[ 57.240] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1/event1"
[ 57.240] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 57.240] (**) Option "xkb_model" "pc105"
[ 57.240] (**) Option "xkb_layout" "br"
[ 57.240] (WW) Option "xkb_variant" requires a string value
[ 57.243] (II) event1 - Power Button: is tagged by udev as: Keyboard
[ 57.243] (II) event1 - Power Button: device is a keyboard
[ 57.245] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[ 57.245] (II) No input driver specified, ignoring this device.
[ 57.245] (II) This device may have been added with another device file.
[ 57.247] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event10)
[ 57.247] (II) No input driver specified, ignoring this device.
[ 57.247] (II) This device may have been added with another device file.
[ 57.248] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event11)
[ 57.248] (II) No input driver specified, ignoring this device.
[ 57.248] (II) This device may have been added with another device file.
[ 57.249] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event12)
[ 57.250] (II) No input driver specified, ignoring this device.
[ 57.250] (II) This device may have been added with another device file.
[ 57.252] (II) config/udev: Adding input device HID 0513:0318 (/dev/input/event4)
[ 57.252] (**) HID 0513:0318: Applying InputClass "libinput keyboard catchall"
[ 57.252] (**) HID 0513:0318: Applying InputClass "system-keyboard"
[ 57.252] (II) Using input driver 'libinput' for 'HID 0513:0318'
[ 57.252] (**) HID 0513:0318: always reports core events
[ 57.252] (**) Option "Device" "/dev/input/event4"
[ 57.256] (II) event4 - HID 0513:0318: is tagged by udev as: Keyboard
[ 57.256] (II) event4 - HID 0513:0318: device is a keyboard
[ 57.257] (II) event4 - HID 0513:0318: device removed
[ 57.268] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.1/1-1.1:1.0/0003:0513:0318.0001/input/input6/event4"
[ 57.268] (II) XINPUT: Adding extended input device "HID 0513:0318" (type: KEYBOARD, id 9)
[ 57.268] (**) Option "xkb_model" "pc105"
[ 57.268] (**) Option "xkb_layout" "br"
[ 57.268] (WW) Option "xkb_variant" requires a string value
[ 57.273] (II) event4 - HID 0513:0318: is tagged by udev as: Keyboard
[ 57.273] (II) event4 - HID 0513:0318: device is a keyboard
[ 57.276] (II) config/udev: Adding input device HID 0513:0318 Mouse (/dev/input/event5)
[ 57.276] (**) HID 0513:0318 Mouse: Applying InputClass "libinput pointer catchall"
[ 57.276] (II) Using input driver 'libinput' for 'HID 0513:0318 Mouse'
[ 57.277] (**) HID 0513:0318 Mouse: always reports core events
[ 57.277] (**) Option "Device" "/dev/input/event5"
[ 57.281] (II) event5 - HID 0513:0318 Mouse: is tagged by udev as: Mouse
[ 57.281] (II) event5 - HID 0513:0318 Mouse: device is a pointer
[ 57.282] (II) event5 - HID 0513:0318 Mouse: device removed
[ 57.296] (II) libinput: HID 0513:0318 Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 57.296] (II) libinput: HID 0513:0318 Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 57.296] (II) libinput: HID 0513:0318 Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 57.296] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.1/1-1.1:1.1/0003:0513:0318.0002/input/input7/event5"
[ 57.296] (II) XINPUT: Adding extended input device "HID 0513:0318 Mouse" (type: MOUSE, id 10)
[ 57.297] (**) Option "AccelerationScheme" "none"
[ 57.297] (**) HID 0513:0318 Mouse: (accel) selected scheme none/0
[ 57.297] (**) HID 0513:0318 Mouse: (accel) acceleration factor: 2.000
[ 57.297] (**) HID 0513:0318 Mouse: (accel) acceleration threshold: 4
[ 57.301] (II) event5 - HID 0513:0318 Mouse: is tagged by udev as: Mouse
[ 57.302] (II) event5 - HID 0513:0318 Mouse: device is a pointer
[ 57.304] (II) config/udev: Adding input device HID 0513:0318 Mouse (/dev/input/mouse0)
[ 57.304] (II) No input driver specified, ignoring this device.
[ 57.304] (II) This device may have been added with another device file.
[ 57.307] (II) config/udev: Adding input device HID 0513:0318 Consumer Control (/dev/input/event6)
[ 57.307] (**) HID 0513:0318 Consumer Control: Applying InputClass "libinput keyboard catchall"
[ 57.307] (**) HID 0513:0318 Consumer Control: Applying InputClass "system-keyboard"
[ 57.307] (II) Using input driver 'libinput' for 'HID 0513:0318 Consumer Control'
[ 57.307] (**) HID 0513:0318 Consumer Control: always reports core events
[ 57.307] (**) Option "Device" "/dev/input/event6"
[ 57.311] (II) event6 - HID 0513:0318 Consumer Control: is tagged by udev as: Keyboard
[ 57.311] (II) event6 - HID 0513:0318 Consumer Control: device is a keyboard
[ 57.312] (II) event6 - HID 0513:0318 Consumer Control: device removed
[ 57.321] (II) libinput: HID 0513:0318 Consumer Control: needs a virtual subdevice
[ 57.321] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.1/1-1.1:1.1/0003:0513:0318.0002/input/input8/event6"
[ 57.321] (II) XINPUT: Adding extended input device "HID 0513:0318 Consumer Control" (type: MOUSE, id 11)
[ 57.321] (**) Option "AccelerationScheme" "none"
[ 57.321] (**) HID 0513:0318 Consumer Control: (accel) selected scheme none/0
[ 57.321] (**) HID 0513:0318 Consumer Control: (accel) acceleration factor: 2.000
[ 57.321] (**) HID 0513:0318 Consumer Control: (accel) acceleration threshold: 4
[ 57.326] (II) event6 - HID 0513:0318 Consumer Control: is tagged by udev as: Keyboard
[ 57.326] (II) event6 - HID 0513:0318 Consumer Control: device is a keyboard
[ 57.329] (II) config/udev: Adding input device HID 0513:0318 System Control (/dev/input/event7)
[ 57.329] (**) HID 0513:0318 System Control: Applying InputClass "libinput keyboard catchall"
[ 57.329] (**) HID 0513:0318 System Control: Applying InputClass "system-keyboard"
[ 57.329] (II) Using input driver 'libinput' for 'HID 0513:0318 System Control'
[ 57.329] (**) HID 0513:0318 System Control: always reports core events
[ 57.329] (**) Option "Device" "/dev/input/event7"
[ 57.334] (II) event7 - HID 0513:0318 System Control: is tagged by udev as: Keyboard
[ 57.334] (II) event7 - HID 0513:0318 System Control: device is a keyboard
[ 57.334] (II) event7 - HID 0513:0318 System Control: device removed
[ 57.343] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.1/1-1.1:1.1/0003:0513:0318.0002/input/input9/event7"
[ 57.343] (II) XINPUT: Adding extended input device "HID 0513:0318 System Control" (type: KEYBOARD, id 12)
[ 57.343] (**) Option "xkb_model" "pc105"
[ 57.343] (**) Option "xkb_layout" "br"
[ 57.343] (WW) Option "xkb_variant" requires a string value
[ 57.348] (II) event7 - HID 0513:0318 System Control: is tagged by udev as: Keyboard
[ 57.348] (II) event7 - HID 0513:0318 System Control: device is a keyboard
[ 57.351] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3)
[ 57.351] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[ 57.351] (**) AT Translated Set 2 keyboard: Applying InputClass "system-keyboard"
[ 57.351] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[ 57.351] (**) AT Translated Set 2 keyboard: always reports core events
[ 57.351] (**) Option "Device" "/dev/input/event3"
[ 57.353] (II) event3 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 57.353] (II) event3 - AT Translated Set 2 keyboard: device is a keyboard
[ 57.355] (II) event3 - AT Translated Set 2 keyboard: device removed
[ 57.368] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input3/event3"
[ 57.368] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 13)
[ 57.368] (**) Option "xkb_model" "pc105"
[ 57.368] (**) Option "xkb_layout" "br"
[ 57.368] (WW) Option "xkb_variant" requires a string value
[ 57.371] (II) event3 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 57.372] (II) event3 - AT Translated Set 2 keyboard: device is a keyboard
[ 57.375] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event8)
[ 57.375] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "libinput touchpad catchall"
[ 57.375] (II) Using input driver 'libinput' for 'SynPS/2 Synaptics TouchPad'
[ 57.375] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 57.375] (**) Option "Device" "/dev/input/event8"
[ 57.378] (II) event8 - SynPS/2 Synaptics TouchPad: is tagged by udev as: Touchpad
[ 57.381] (II) event8 - SynPS/2 Synaptics TouchPad: device is a touchpad
[ 57.382] (II) event8 - SynPS/2 Synaptics TouchPad: device removed
[ 57.398] (II) libinput: SynPS/2 Synaptics TouchPad: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 57.398] (II) libinput: SynPS/2 Synaptics TouchPad: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 57.398] (II) libinput: SynPS/2 Synaptics TouchPad: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 57.399] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input5/event8"
[ 57.399] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 14)
[ 57.401] (**) Option "AccelerationScheme" "none"
[ 57.401] (**) SynPS/2 Synaptics TouchPad: (accel) selected scheme none/0
[ 57.401] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 57.402] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 57.404] (II) event8 - SynPS/2 Synaptics TouchPad: is tagged by udev as: Touchpad
[ 57.408] (II) event8 - SynPS/2 Synaptics TouchPad: device is a touchpad
[ 57.410] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1)
[ 57.410] (II) No input driver specified, ignoring this device.
[ 57.410] (II) This device may have been added with another device file.
[ 57.442] (**) HID 0513:0318 Consumer Control: Applying InputClass "libinput keyboard catchall"
[ 57.442] (**) HID 0513:0318 Consumer Control: Applying InputClass "system-keyboard"
[ 57.442] (II) Using input driver 'libinput' for 'HID 0513:0318 Consumer Control'
[ 57.442] (**) HID 0513:0318 Consumer Control: always reports core events
[ 57.442] (**) Option "Device" "/dev/input/event6"
[ 57.443] (II) libinput: HID 0513:0318 Consumer Control: is a virtual subdevice
[ 57.443] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.1/1-1.1:1.1/0003:0513:0318.0002/input/input8/event6"
[ 57.443] (II) XINPUT: Adding extended input device "HID 0513:0318 Consumer Control" (type: KEYBOARD, id 15)
[ 57.443] (**) Option "xkb_model" "pc105"
[ 57.443] (**) Option "xkb_layout" "br"
[ 57.443] (WW) Option "xkb_variant" requires a string value
[ 57.922] (II) modeset(0): EDID vendor "SEC", prod id 14410
[ 57.922] (II) modeset(0): Printing DDC gathered Modelines:
[ 57.922] (II) modeset(0): Modeline "1366x768"x0.0 70.70 1366 1414 1446 1486 768 770 775 792 -hsync -vsync (47.6 kHz eP)
[ 57.957] (--) modeset(0): HDMI max TMDS frequency 225000KHz
[ 58.072] (II) modeset(0): EDID vendor "SEC", prod id 14410
[ 58.073] (II) modeset(0): Printing DDC gathered Modelines:
[ 58.073] (II) modeset(0): Modeline "1366x768"x0.0 70.70 1366 1414 1446 1486 768 770 775 792 -hsync -vsync (47.6 kHz eP)
[ 58.107] (--) modeset(0): HDMI max TMDS frequency 225000KHz
[ 58.239] (II) modeset(0): EDID vendor "SEC", prod id 14410
[ 58.239] (II) modeset(0): Printing DDC gathered Modelines:
[ 58.239] (II) modeset(0): Modeline "1366x768"x0.0 70.70 1366 1414 1446 1486 768 770 775 792 -hsync -vsync (47.6 kHz eP)
[ 58.274] (--) modeset(0): HDMI max TMDS frequency 225000KHz
[ 58.390] (II) modeset(0): EDID vendor "SEC", prod id 14410
[ 58.390] (II) modeset(0): Printing DDC gathered Modelines:
[ 58.390] (II) modeset(0): Modeline "1366x768"x0.0 70.70 1366 1414 1446 1486 768 770 775 792 -hsync -vsync (47.6 kHz eP)
[ 58.423] (--) modeset(0): HDMI max TMDS frequency 225000KHz
[ 82.048] (II) modeset(0): EDID vendor "SEC", prod id 14410
[ 82.048] (II) modeset(0): Printing DDC gathered Modelines:
[ 82.048] (II) modeset(0): Modeline "1366x768"x0.0 70.70 1366 1414 1446 1486 768 770 775 792 -hsync -vsync (47.6 kHz eP)
[ 82.079] (--) modeset(0): HDMI max TMDS frequency 225000KHz
[ 94.415] (II) modeset(0): EDID vendor "SEC", prod id 14410
[ 94.415] (II) modeset(0): Printing DDC gathered Modelines:
[ 94.415] (II) modeset(0): Modeline "1366x768"x0.0 70.70 1366 1414 1446 1486 768 770 775 792 -hsync -vsync (47.6 kHz eP)
[ 94.460] (--) modeset(0): HDMI max TMDS frequency 225000KHz
[ 101.599] (II) modeset(0): Allocate new frame buffer 1366x768 stride
[ 466.596] (EE) event5 - HID 0513:0318 Mouse: client bug: event processing lagging behind by 30ms, your system is too slow