[ 34.895] (--) Log file renamed from "/var/log/Xorg.pid-1131.log" to "/var/log/Xorg.0.log" [ 34.935] X.Org X Server 1.21.1.18 X Protocol Version 11, Revision 0 [ 34.935] Current Operating System: Linux XXX 6.15.8-zen1-1-zen #1 ZEN SMP PREEMPT_DYNAMIC Thu, 24 Jul 2025 18:17:55 +0000 x86_64 [ 34.935] Kernel command line: BOOT_IMAGE=/@/boot/vmlinuz-linux-zen root=UUID=HASH_219-48FC-8821-D70C-721798B2D9CD rw rootflags=subvol=@ vt.default_red=30,243,166,249,137,245,148,186,88,243,166,249,137,245,148,166 vt.default_grn=30,139,227,226,180,194,226,194,91,139,227,226,180,194,226,173 vt.default_blu=46,168,161,175,250,231,213,222,112,168,161,175,250,231,213,200 quiet loglevel=3 ibt=off [ 34.935] [ 34.935] Current version of pixman: 0.46.4 [ 34.935] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 34.935] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 34.935] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Jul 28 04:03:29 2025 [ 34.963] (==) Using config directory: "/etc/X11/xorg.conf.d" [ 34.963] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [ 34.963] (==) No Layout section. Using the first Screen section. [ 34.963] (==) No screen section available. Using defaults. [ 34.963] (**) |-->Screen "Default Screen Section" (0) [ 34.963] (**) | |-->Monitor "<default monitor>" [ 34.963] (==) No monitor specified for screen "Default Screen Section". Using a default monitor configuration. [ 34.963] (**) Allowing byte-swapped clients [ 34.963] (==) Automatically adding devices [ 34.963] (==) Automatically enabling devices [ 34.963] (==) Automatically adding GPU devices [ 34.963] (==) Automatically binding GPU devices [ 34.963] (==) Max clients allowed: 256, resource mask: 0x1fffff [ 34.982] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/misc". [ 34.982] Entry deleted from font path. [ 34.982] (Run 'mkfontdir' on "/usr/share/fonts/misc"). [ 34.995] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/TTF". [ 34.995] Entry deleted from font path. [ 34.995] (Run 'mkfontdir' on "/usr/share/fonts/TTF"). [ 34.995] (WW) The directory "/usr/share/fonts/OTF" does not exist. [ 34.995] Entry deleted from font path. [ 34.995] (WW) The directory "/usr/share/fonts/Type1" does not exist. [ 34.995] Entry deleted from font path. [ 34.995] (WW) The directory "/usr/share/fonts/100dpi" does not exist. [ 34.995] Entry deleted from font path. [ 34.995] (WW) The directory "/usr/share/fonts/75dpi" does not exist. [ 34.995] Entry deleted from font path. [ 34.995] (==) FontPath set to: [ 34.995] (==) ModulePath set to "/usr/lib/xorg/modules" [ 34.995] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 34.995] (II) Module ABI versions: [ 34.995] X.Org ANSI C Emulation: 0.4 [ 34.995] X.Org Video Driver: 25.2 [ 34.995] X.Org XInput driver : 24.4 [ 34.995] X.Org Server Extension : 10.0 [ 34.995] (++) using VT number 2 [ 34.995] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration [ 34.995] (II) xfree86: Adding drm device (/dev/dri/card1) [ 34.995] (II) Platform probe for /sys/devices/pci0000:00/0000:00:08.1/0000:07:00.0/drm/card1 [ 35.000] (--) PCI:*(7@0:0:0) 1002:1638:1002:1636 rev 201, Mem @ 0xd0000000/268435456, 0xe0000000/2097152, 0xfcb00000/524288, I/O @ 0x0000e000/256 [ 35.000] (II) LoadModule: "glx" [ 35.001] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so [ 35.162] (II) Module glx: vendor="X.Org Foundation" [ 35.162] compiled for 1.21.1.18, module version = 1.0.0 [ 35.162] ABI class: X.Org Server Extension, version 10.0 [ 35.162] (II) Applying OutputClass "AMDgpu" to /dev/dri/card1 [ 35.162] loading driver: amdgpu [ 35.162] (==) Matched amdgpu as autoconfigured driver 0 [ 35.162] (==) Matched ati as autoconfigured driver 1 [ 35.162] (==) Matched modesetting as autoconfigured driver 2 [ 35.162] (==) Matched fbdev as autoconfigured driver 3 [ 35.162] (==) Matched vesa as autoconfigured driver 4 [ 35.162] (==) Assigned the driver to the xf86ConfigLayout [ 35.162] (II) LoadModule: "amdgpu" [ 35.162] (II) Loading /usr/lib/xorg/modules/drivers/amdgpu_drv.so [ 35.193] (II) Module amdgpu: vendor="X.Org Foundation" [ 35.193] compiled for 1.21.1.11, module version = 23.0.0 [ 35.193] Module class: X.Org Video Driver [ 35.193] ABI class: X.Org Video Driver, version 25.2 [ 35.194] (II) LoadModule: "ati" [ 35.194] (II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so [ 35.198] (II) Module ati: vendor="X.Org Foundation" [ 35.198] compiled for 1.21.1.11, module version = 22.0.0 [ 35.198] Module class: X.Org Video Driver [ 35.198] ABI class: X.Org Video Driver, version 25.2 [ 35.213] (II) LoadModule: "modesetting" [ 35.213] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so [ 35.213] (II) Module modesetting: vendor="X.Org Foundation" [ 35.213] compiled for 1.21.1.18, module version = 1.21.1 [ 35.213] Module class: X.Org Video Driver [ 35.213] ABI class: X.Org Video Driver, version 25.2 [ 35.213] (II) LoadModule: "fbdev" [ 35.220] (WW) Warning, couldn't open module fbdev [ 35.220] (EE) Failed to load module "fbdev" (module does not exist, 0) [ 35.220] (II) LoadModule: "vesa" [ 35.220] (WW) Warning, couldn't open module vesa [ 35.220] (EE) Failed to load module "vesa" (module does not exist, 0) [ 35.220] (II) AMDGPU: Driver for AMD Radeon: All GPUs supported by the amdgpu kernel driver [ 35.220] (II) modesetting: Driver for Modesetting Kernel Drivers: kms [ 35.244] (WW) Falling back to old probe method for modesetting [ 35.244] (EE) open /dev/dri/card0: No such file or directory [ 35.244] (II) AMDGPU(0): Creating default Display subsection in Screen section "Default Screen Section" for depth/fbbpp 24/32 [ 35.244] (==) AMDGPU(0): Depth 24, (--) framebuffer bpp 32 [ 35.244] (II) AMDGPU(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps) [ 35.244] (==) AMDGPU(0): Default visual is TrueColor [ 35.244] (II) Applying OutputClass "AMDgpu" options to /dev/dri/card1 [ 35.244] (==) AMDGPU(0): RGB weight 888 [ 35.244] (II) AMDGPU(0): Using 8 bits per RGB (8 bit DAC) [ 35.244] (--) AMDGPU(0): Chipset: "AMD Radeon Graphics" (ChipID = 0x1638) [ 35.244] (II) Loading sub module "fb" [ 35.244] (II) LoadModule: "fb" [ 35.244] (II) Module "fb" already built-in [ 35.244] (II) Loading sub module "dri2" [ 35.244] (II) LoadModule: "dri2" [ 35.244] (II) Module "dri2" already built-in [ 39.532] (II) Loading sub module "glamoregl" [ 39.532] (II) LoadModule: "glamoregl" [ 39.532] (II) Loading /usr/lib/xorg/modules/libglamoregl.so [ 39.566] (II) Module glamoregl: vendor="X.Org Foundation" [ 39.566] compiled for 1.21.1.18, module version = 1.0.1 [ 39.566] ABI class: X.Org ANSI C Emulation, version 0.4 [ 39.627] (II) AMDGPU(0): glamor X acceleration enabled on AMD Radeon Graphics (radeonsi, renoir, ACO, DRM 3.63, 6.15.8-zen1-1-zen) [ 39.627] (II) AMDGPU(0): glamor detected, initialising EGL layer. [ 39.627] (==) AMDGPU(0): TearFree property default: auto [ 39.627] (==) AMDGPU(0): VariableRefresh: disabled [ 39.627] (==) AMDGPU(0): AsyncFlipSecondaries: disabled [ 39.627] (II) AMDGPU(0): KMS Pageflipping: enabled [ 39.627] (II) AMDGPU(0): Output HDMI-A-0 has no monitor section [ 39.631] (II) AMDGPU(0): Output HDMI-A-1 has no monitor section [ 39.631] (II) AMDGPU(0): Output DisplayPort-0 has no monitor section [ 39.647] (II) AMDGPU(0): EDID for output HDMI-A-0 [ 39.649] (II) AMDGPU(0): EDID for output HDMI-A-1 [ 39.649] (II) AMDGPU(0): Manufacturer: GSM Model: 59f1 Serial#: ... [ 39.649] (II) AMDGPU(0): Year: 2016 Week: 7 [ 39.650] (II) AMDGPU(0): EDID Version: 1.3 [ 39.650] (II) AMDGPU(0): Digital Display Input [ 39.650] (II) AMDGPU(0): Max Image Size [cm]: horiz.: 80 vert.: 34 [ 39.650] (II) AMDGPU(0): Gamma: 2.20 [ 39.650] (II) AMDGPU(0): DPMS capabilities: StandBy Suspend Off [ 39.650] (II) AMDGPU(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 [ 39.650] (II) AMDGPU(0): First detailed timing is preferred mode [ 39.650] (II) AMDGPU(0): redX: 0.651 redY: 0.332 greenX: 0.307 greenY: 0.631 [ 39.650] (II) AMDGPU(0): blueX: 0.150 blueY: 0.060 whiteX: 0.313 whiteY: 0.329 [ 39.650] (II) AMDGPU(0): Supported established timings: [ 39.650] (II) AMDGPU(0): 720x400@70Hz [ 39.650] (II) AMDGPU(0): 640x480@60Hz [ 39.650] (II) AMDGPU(0): 640x480@75Hz [ 39.650] (II) AMDGPU(0): 800x600@60Hz [ 39.650] (II) AMDGPU(0): 800x600@75Hz [ 39.650] (II) AMDGPU(0): 1024x768@60Hz [ 39.650] (II) AMDGPU(0): 1024x768@75Hz [ 39.650] (II) AMDGPU(0): 1280x1024@75Hz [ 39.650] (II) AMDGPU(0): 1152x864@75Hz [ 39.650] (II) AMDGPU(0): Manufacturer's mask: 0 [ 39.650] (II) AMDGPU(0): Supported standard timings: [ 39.650] (II) AMDGPU(0): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337 [ 39.650] (II) AMDGPU(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897 [ 39.650] (II) AMDGPU(0): #2: hsize: 1280 vsize 720 refresh: 60 vid: 49281 [ 39.650] (II) AMDGPU(0): #3: hsize: 1600 vsize 900 refresh: 60 vid: 49321 [ 39.650] (II) AMDGPU(0): #4: hsize: 1680 vsize 1050 refresh: 60 vid: 179 [ 39.650] (II) AMDGPU(0): Supported detailed timing: [ 39.650] (II) AMDGPU(0): clock: 185.6 MHz Image Size: 798 x 334 mm [ 39.650] (II) AMDGPU(0): h_active: 2560 h_sync: 2624 h_sync_end 2688 h_blank_end 2784 h_border: 0 [ 39.650] (II) AMDGPU(0): v_active: 1080 v_sync: 1083 v_sync_end 1093 v_blanking: 1111 v_border: 0 [ 39.650] (II) AMDGPU(0): Supported detailed timing: [ 39.650] (II) AMDGPU(0): clock: 148.5 MHz Image Size: 798 x 334 mm [ 39.650] (II) AMDGPU(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0 [ 39.650] (II) AMDGPU(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0 [ 39.650] (II) AMDGPU(0): Monitor name: LG ULTRAWIDE [ 39.650] (II) AMDGPU(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 90 kHz, PixClock max 245 MHz [ 39.650] (II) AMDGPU(0): Supported detailed timing: [ 39.650] (II) AMDGPU(0): clock: 148.5 MHz Image Size: 598 x 337 mm [ 39.650] (II) AMDGPU(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0 [ 39.650] (II) AMDGPU(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0 [ 39.650] (II) AMDGPU(0): Supported detailed timing: [ 39.650] (II) AMDGPU(0): clock: 74.2 MHz Image Size: 598 x 337 mm [ 39.650] (II) AMDGPU(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0 [ 39.650] (II) AMDGPU(0): v_active: 540 v_sync: 542 v_sync_end 547 v_blanking: 562 v_border: 0 [ 39.650] (II) AMDGPU(0): Supported detailed timing: [ 39.650] (II) AMDGPU(0): clock: 74.2 MHz Image Size: 598 x 337 mm [ 39.650] (II) AMDGPU(0): h_active: 1280 h_sync: 1390 h_sync_end 1430 h_blank_end 1650 h_border: 0 [ 39.650] (II) AMDGPU(0): v_active: 720 v_sync: 725 v_sync_end 730 v_blanking: 750 v_border: 0 [ 39.650] (II) AMDGPU(0): Supported detailed timing: [ 39.650] (II) AMDGPU(0): clock: 27.0 MHz Image Size: 598 x 337 mm [ 39.650] (II) AMDGPU(0): h_active: 720 h_sync: 736 h_sync_end 798 h_blank_end 858 h_border: 0 [ 39.650] (II) AMDGPU(0): v_active: 480 v_sync: 489 v_sync_end 495 v_blanking: 525 v_border: 0 [ 39.650] (II) AMDGPU(0): Number of EDID sections to follow: 1 [ 39.650] (II) AMDGPU(0): EDID (in hex): [ 39.650] (II) AMDGPU(0): 00ffffffffffff001e6df159ed1e0700 [ 39.650] (II) AMDGPU(0): 071a010380502278eaca95a6554ea126 [ 39.650] (II) AMDGPU(0): 0f5054a54b80714f818081c0a9c0b300 [ 39.650] (II) AMDGPU(0): 0101010101017e4800e0a0381f404040 [ 39.650] (II) AMDGPU(0): 3a001e4e31000018023a801871382d40 [ 39.650] (II) AMDGPU(0): 582c45001e4e3100001e000000fc004c [ 39.650] (II) AMDGPU(0): 4720554c545241574944450a000000fd [ 39.650] (II) AMDGPU(0): 00384b1e5a18000a20202020202001f1 [ 39.650] (II) AMDGPU(0): 02031df14a900403221412051f011323 [ 39.650] (II) AMDGPU(0): 0907078301000065030c002000023a80 [ 39.650] (II) AMDGPU(0): 1871382d40582c450056512100001e01 [ 39.650] (II) AMDGPU(0): 1d8018711c1620582c25005651210000 [ 39.650] (II) AMDGPU(0): 9e011d007251d01e206e285500565121 [ 39.650] (II) AMDGPU(0): 00001e8c0ad08a20e02d10103e960056 [ 39.650] (II) AMDGPU(0): 51210000180000000000000000000000 [ 39.650] (II) AMDGPU(0): 00000000000000000000000000000068 [ 39.650] (II) AMDGPU(0): Printing probed modes for output HDMI-A-1 [ 39.650] (II) AMDGPU(0): Modeline "2560x1080"x60.0 185.58 2560 2624 2688 2784 1080 1083 1093 1111 -hsync -vsync (66.7 kHz eP) [ 39.650] (II) AMDGPU(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz e) [ 39.650] (II) AMDGPU(0): Modeline "1920x1080"x50.0 148.50 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (56.2 kHz e) [ 39.650] (II) AMDGPU(0): Modeline "1920x1080"x59.9 148.35 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.4 kHz e) [ 39.650] (II) AMDGPU(0): Modeline "1920x1080"x30.0 74.25 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (33.8 kHz e) [ 39.650] (II) AMDGPU(0): Modeline "1920x1080"x30.0 74.18 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (33.7 kHz e) [ 39.650] (II) AMDGPU(0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e) [ 39.650] (II) AMDGPU(0): Modeline "1600x900"x60.0 108.00 1600 1624 1704 1800 900 901 904 1000 +hsync +vsync (60.0 kHz e) [ 39.650] (II) AMDGPU(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e) [ 39.650] (II) AMDGPU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e) [ 39.650] (II) AMDGPU(0): Modeline "1440x900"x60.0 185.58 1440 2624 2688 2784 900 1083 1093 1111 -hsync -vsync (66.7 kHz e) [ 39.650] (II) AMDGPU(0): Modeline "1280x800"x60.0 185.58 1280 2624 2688 2784 800 1083 1093 1111 -hsync -vsync (66.7 kHz e) [ 39.650] (II) AMDGPU(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e) [ 39.650] (II) AMDGPU(0): Modeline "1280x720"x60.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e) [ 39.650] (II) AMDGPU(0): Modeline "1280x720"x50.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz e) [ 39.650] (II) AMDGPU(0): Modeline "1280x720"x59.9 74.18 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e) [ 39.650] (II) AMDGPU(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e) [ 39.650] (II) AMDGPU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 39.650] (II) AMDGPU(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e) [ 39.650] (II) AMDGPU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 39.650] (II) AMDGPU(0): Modeline "720x576"x50.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz e) [ 39.650] (II) AMDGPU(0): Modeline "720x480"x60.0 27.03 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e) [ 39.650] (II) AMDGPU(0): Modeline "720x480"x59.9 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e) [ 39.650] (II) AMDGPU(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e) [ 39.650] (II) AMDGPU(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 39.650] (II) AMDGPU(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 39.650] (II) AMDGPU(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e) [ 39.650] (II) AMDGPU(0): EDID for output DisplayPort-0 [ 39.650] (II) AMDGPU(0): Output HDMI-A-0 disconnected [ 39.650] (II) AMDGPU(0): Output HDMI-A-1 connected [ 39.650] (II) AMDGPU(0): Output DisplayPort-0 disconnected [ 39.650] (II) AMDGPU(0): Using exact sizes for initial modes [ 39.650] (II) AMDGPU(0): Output HDMI-A-1 using initial mode 2560x1080 +0+0 [ 39.651] (II) AMDGPU(0): mem size init: gart size :3d6330000 vram size: s:1dcc8000 visible:1dcc8000 [ 39.651] (==) AMDGPU(0): DPI set to (96, 96) [ 39.651] (==) AMDGPU(0): Using gamma correction (1.0, 1.0, 1.0) [ 39.651] (II) Loading sub module "ramdac" [ 39.651] (II) LoadModule: "ramdac" [ 39.651] (II) Module "ramdac" already built-in [ 39.651] (II) UnloadModule: "modesetting" [ 39.651] (II) Unloading modesetting [ 39.651] (II) AMDGPU(0): [DRI2] Setup complete [ 39.651] (II) AMDGPU(0): [DRI2] DRI driver: radeonsi [ 39.651] (II) AMDGPU(0): [DRI2] VDPAU driver: radeonsi [ 39.762] (II) AMDGPU(0): Front buffer pitch: 10240 bytes [ 39.762] (II) AMDGPU(0): SYNC extension fences enabled [ 39.762] (II) AMDGPU(0): Present extension enabled [ 39.762] (==) AMDGPU(0): DRI3 enabled [ 39.762] (==) AMDGPU(0): Backing store enabled [ 39.762] (II) AMDGPU(0): Direct rendering enabled [ 40.175] (II) AMDGPU(0): Use GLAMOR acceleration. [ 40.176] (II) AMDGPU(0): Acceleration enabled [ 40.176] (==) AMDGPU(0): DPMS enabled [ 40.176] (==) AMDGPU(0): Silken mouse enabled [ 40.176] (II) AMDGPU(0): Set up textured video (glamor) [ 40.180] (WW) AMDGPU(0): Option "HotplugDriver" is not used [ 40.180] (II) Initializing extension Generic Event Extension [ 40.180] (II) Initializing extension SHAPE [ 40.180] (II) Initializing extension MIT-SHM [ 40.180] (II) Initializing extension XInputExtension [ 40.180] (II) Initializing extension XTEST [ 40.180] (II) Initializing extension BIG-REQUESTS [ 40.180] (II) Initializing extension SYNC [ 40.180] (II) Initializing extension XKEYBOARD [ 40.180] (II) Initializing extension XC-MISC [ 40.180] (II) Initializing extension SECURITY [ 40.181] (II) Initializing extension XFIXES [ 40.181] (II) Initializing extension RENDER [ 40.181] (II) Initializing extension RANDR [ 40.181] (II) Initializing extension COMPOSITE [ 40.181] (II) Initializing extension DAMAGE [ 40.181] (II) Initializing extension MIT-SCREEN-SAVER [ 40.181] (II) Initializing extension DOUBLE-BUFFER [ 40.181] (II) Initializing extension RECORD [ 40.181] (II) Initializing extension DPMS [ 40.181] (II) Initializing extension Present [ 40.181] (II) Initializing extension DRI3 [ 40.181] (II) Initializing extension X-Resource [ 40.181] (II) Initializing extension XVideo [ 40.182] (II) Initializing extension XVideo-MotionCompensation [ 40.182] (II) Initializing extension GLX [ 40.206] (II) AIGLX: Loaded and initialized radeonsi [ 40.206] (II) GLX: Initialized DRI2 GL provider for screen 0 [ 40.206] (II) Initializing extension XFree86-VidModeExtension [ 40.206] (II) Initializing extension XFree86-DGA [ 40.206] (II) Initializing extension XFree86-DRI [ 40.206] (II) Initializing extension DRI2 [ 40.206] (II) AMDGPU(0): Setting screen physical size to 677 x 285 [ 40.439] (II) config/udev: Adding input device Power Button (/dev/input/event1) [ 40.439] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 40.439] (**) Power Button: Applying InputClass "libinput keyboard catchall" [ 40.439] (**) Power Button: Applying InputClass "system-keyboard" [ 40.439] (II) LoadModule: "libinput" [ 40.439] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so [ 40.476] (II) Module libinput: vendor="X.Org Foundation" [ 40.476] compiled for 1.21.1.13, module version = 1.5.0 [ 40.476] Module class: X.Org XInput Driver [ 40.476] ABI class: X.Org XInput driver, version 24.4 [ 40.476] (II) Using input driver 'libinput' for 'Power Button' [ 40.476] (**) Power Button: always reports core events [ 40.476] (**) Option "Device" "/dev/input/event1" [ 40.500] (II) event1 - Power Button: is tagged by udev as: Keyboard [ 40.500] (II) event1 - Power Button: device is a keyboard [ 40.501] (II) event1 - Power Button: device removed [ 40.501] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1" [ 40.501] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6) [ 40.501] (**) Option "xkb_layout" "de" [ 40.501] (WW) Option "xkb_variant" requires a string value [ 40.515] (II) event1 - Power Button: is tagged by udev as: Keyboard [ 40.515] (II) event1 - Power Button: device is a keyboard [ 40.515] (II) config/udev: Adding input device Video Bus (/dev/input/event2) [ 40.515] (**) Video Bus: Applying InputClass "evdev keyboard catchall" [ 40.515] (**) Video Bus: Applying InputClass "libinput keyboard catchall" [ 40.515] (**) Video Bus: Applying InputClass "system-keyboard" [ 40.515] (II) Using input driver 'libinput' for 'Video Bus' [ 40.515] (**) Video Bus: always reports core events [ 40.515] (**) Option "Device" "/dev/input/event2" [ 40.516] (II) event2 - Video Bus: is tagged by udev as: Keyboard [ 40.516] (II) event2 - Video Bus: device is a keyboard [ 40.516] (II) event2 - Video Bus: device removed [ 40.525] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:15/LNXVIDEO:01/input/input2/event2" [ 40.525] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7) [ 40.525] (**) Option "xkb_layout" "de" [ 40.525] (WW) Option "xkb_variant" requires a string value [ 40.526] (II) event2 - Video Bus: is tagged by udev as: Keyboard [ 40.526] (II) event2 - Video Bus: device is a keyboard [ 40.526] (II) config/udev: Adding input device Power Button (/dev/input/event0) [ 40.526] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 40.526] (**) Power Button: Applying InputClass "libinput keyboard catchall" [ 40.526] (**) Power Button: Applying InputClass "system-keyboard" [ 40.526] (II) Using input driver 'libinput' for 'Power Button' [ 40.526] (**) Power Button: always reports core events [ 40.526] (**) Option "Device" "/dev/input/event0" [ 40.527] (II) event0 - Power Button: is tagged by udev as: Keyboard [ 40.527] (II) event0 - Power Button: device is a keyboard [ 40.527] (II) event0 - Power Button: device removed [ 40.527] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0" [ 40.527] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8) [ 40.527] (**) Option "xkb_layout" "de" [ 40.527] (WW) Option "xkb_variant" requires a string value [ 40.528] (II) event0 - Power Button: is tagged by udev as: Keyboard [ 40.528] (II) event0 - Power Button: device is a keyboard [ 40.529] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event3) [ 40.529] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall" [ 40.529] (**) Logitech USB Receiver: Applying InputClass "libinput keyboard catchall" [ 40.529] (**) Logitech USB Receiver: Applying InputClass "system-keyboard" [ 40.529] (II) Using input driver 'libinput' for 'Logitech USB Receiver' [ 40.529] (**) Logitech USB Receiver: always reports core events [ 40.529] (**) Option "Device" "/dev/input/event3" [ 40.530] (II) event3 - Logitech USB Receiver: is tagged by udev as: Keyboard [ 40.530] (II) event3 - Logitech USB Receiver: device is a keyboard [ 40.530] (II) event3 - Logitech USB Receiver: device removed [ 40.530] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:02.1/0000:01:00.0/usb1/1-5/1-5:1.0/0003:046D:C548.0001/input/input3/event3" [ 40.530] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 9) [ 40.530] (**) Option "xkb_layout" "de" [ 40.530] (WW) Option "xkb_variant" requires a string value [ 40.531] (II) event3 - Logitech USB Receiver: is tagged by udev as: Keyboard [ 40.531] (II) event3 - Logitech USB Receiver: device is a keyboard [ 40.532] (II) config/udev: Adding input device Logitech USB Receiver Mouse (/dev/input/event4) [ 40.532] (**) Logitech USB Receiver Mouse: Applying InputClass "evdev pointer catchall" [ 40.532] (**) Logitech USB Receiver Mouse: Applying InputClass "libinput pointer catchall" [ 40.532] (II) Using input driver 'libinput' for 'Logitech USB Receiver Mouse' [ 40.532] (**) Logitech USB Receiver Mouse: always reports core events [ 40.532] (**) Option "Device" "/dev/input/event4" [ 40.533] (II) event4 - Logitech USB Receiver Mouse: is tagged by udev as: Mouse [ 40.533] (II) event4 - Logitech USB Receiver Mouse: device set to 1000 DPI [ 40.533] (II) event4 - Logitech USB Receiver Mouse: device is a pointer [ 40.533] (II) event4 - Logitech USB Receiver Mouse: device removed [ 40.539] (II) libinput: Logitech USB Receiver Mouse: Step value 0 was provided, libinput Fallback acceleration function is used. [ 40.539] (II) libinput: Logitech USB Receiver Mouse: Step value 0 was provided, libinput Fallback acceleration function is used. [ 40.539] (II) libinput: Logitech USB Receiver Mouse: Step value 0 was provided, libinput Fallback acceleration function is used. [ 40.539] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:02.1/0000:01:00.0/usb1/1-5/1-5:1.1/0003:046D:C548.0002/input/input4/event4" [ 40.539] (II) XINPUT: Adding extended input device "Logitech USB Receiver Mouse" (type: MOUSE, id 10) [ 40.539] (**) Option "AccelerationScheme" "none" [ 40.539] (**) Logitech USB Receiver Mouse: (accel) selected scheme none/0 [ 40.539] (**) Logitech USB Receiver Mouse: (accel) acceleration factor: 2.000 [ 40.539] (**) Logitech USB Receiver Mouse: (accel) acceleration threshold: 4 [ 40.540] (II) event4 - Logitech USB Receiver Mouse: is tagged by udev as: Mouse [ 40.540] (II) event4 - Logitech USB Receiver Mouse: device set to 1000 DPI [ 40.540] (II) event4 - Logitech USB Receiver Mouse: device is a pointer [ 40.541] (II) config/udev: Adding input device Logitech USB Receiver Mouse (/dev/input/mouse0) [ 40.541] (II) No input driver specified, ignoring this device. [ 40.541] (II) This device may have been added with another device file. [ 40.541] (II) config/udev: Adding input device Logitech USB Receiver Consumer Control (/dev/input/event5) [ 40.541] (**) Logitech USB Receiver Consumer Control: Applying InputClass "evdev keyboard catchall" [ 40.541] (**) Logitech USB Receiver Consumer Control: Applying InputClass "libinput keyboard catchall" [ 40.541] (**) Logitech USB Receiver Consumer Control: Applying InputClass "system-keyboard" [ 40.541] (II) Using input driver 'libinput' for 'Logitech USB Receiver Consumer Control' [ 40.541] (**) Logitech USB Receiver Consumer Control: always reports core events [ 40.541] (**) Option "Device" "/dev/input/event5" [ 40.542] (II) event5 - Logitech USB Receiver Consumer Control: is tagged by udev as: Keyboard [ 40.542] (II) event5 - Logitech USB Receiver Consumer Control: device is a keyboard [ 40.543] (II) event5 - Logitech USB Receiver Consumer Control: device removed [ 40.543] (II) libinput: Logitech USB Receiver Consumer Control: needs a virtual subdevice [ 40.543] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:02.1/0000:01:00.0/usb1/1-5/1-5:1.1/0003:046D:C548.0002/input/input5/event5" [ 40.543] (II) XINPUT: Adding extended input device "Logitech USB Receiver Consumer Control" (type: MOUSE, id 11) [ 40.543] (**) Option "AccelerationScheme" "none" [ 40.543] (**) Logitech USB Receiver Consumer Control: (accel) selected scheme none/0 [ 40.543] (**) Logitech USB Receiver Consumer Control: (accel) acceleration factor: 2.000 [ 40.543] (**) Logitech USB Receiver Consumer Control: (accel) acceleration threshold: 4 [ 40.544] (II) event5 - Logitech USB Receiver Consumer Control: is tagged by udev as: Keyboard [ 40.544] (II) event5 - Logitech USB Receiver Consumer Control: device is a keyboard [ 40.544] (II) config/udev: Adding input device Logitech USB Receiver System Control (/dev/input/event6) [ 40.544] (**) Logitech USB Receiver System Control: Applying InputClass "evdev keyboard catchall" [ 40.544] (**) Logitech USB Receiver System Control: Applying InputClass "libinput keyboard catchall" [ 40.544] (**) Logitech USB Receiver System Control: Applying InputClass "system-keyboard" [ 40.544] (II) Using input driver 'libinput' for 'Logitech USB Receiver System Control' [ 40.544] (**) Logitech USB Receiver System Control: always reports core events [ 40.544] (**) Option "Device" "/dev/input/event6" [ 40.545] (II) event6 - Logitech USB Receiver System Control: is tagged by udev as: Keyboard [ 40.545] (II) event6 - Logitech USB Receiver System Control: device is a keyboard [ 40.546] (II) event6 - Logitech USB Receiver System Control: device removed [ 40.546] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:02.1/0000:01:00.0/usb1/1-5/1-5:1.1/0003:046D:C548.0002/input/input6/event6" [ 40.546] (II) XINPUT: Adding extended input device "Logitech USB Receiver System Control" (type: KEYBOARD, id 12) [ 40.546] (**) Option "xkb_layout" "de" [ 40.546] (WW) Option "xkb_variant" requires a string value [ 40.547] (II) event6 - Logitech USB Receiver System Control: is tagged by udev as: Keyboard [ 40.547] (II) event6 - Logitech USB Receiver System Control: device is a keyboard [ 40.547] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event7) [ 40.547] (II) No input driver specified, ignoring this device. [ 40.547] (II) This device may have been added with another device file. [ 40.548] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event8) [ 40.548] (**) Logitech USB Receiver: Applying InputClass "evdev touchpad catchall" [ 40.548] (**) Logitech USB Receiver: Applying InputClass "libinput touchpad catchall" [ 40.548] (**) Logitech USB Receiver: Applying InputClass "touchpad" [ 40.548] (II) Using input driver 'libinput' for 'Logitech USB Receiver' [ 40.548] (**) Logitech USB Receiver: always reports core events [ 40.548] (**) Option "Device" "/dev/input/event8" [ 40.600] (II) event8 - Logitech USB Receiver: is tagged by udev as: Touchpad [ 40.601] (II) event8 - Logitech USB Receiver: device is a touchpad [ 40.601] (II) event8 - Logitech USB Receiver: device removed [ 40.609] (**) Option "Tapping" "on" [ 40.609] (**) Option "TappingButtonMap" "lrm" [ 40.609] (II) libinput: Logitech USB Receiver: Step value 0 was provided, libinput Fallback acceleration function is used. [ 40.609] (II) libinput: Logitech USB Receiver: Step value 0 was provided, libinput Fallback acceleration function is used. [ 40.609] (II) libinput: Logitech USB Receiver: Step value 0 was provided, libinput Fallback acceleration function is used. [ 40.609] (**) Option "NaturalScrolling" "on" [ 40.609] (**) Option "ScrollMethod" "twofinger" [ 40.609] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:02.1/0000:01:00.0/usb1/1-5/1-5:1.3/0003:046D:C548.0004/input/input9/event8" [ 40.609] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: TOUCHPAD, id 13) [ 40.610] (**) Option "AccelerationScheme" "none" [ 40.610] (**) Logitech USB Receiver: (accel) selected scheme none/0 [ 40.610] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000 [ 40.610] (**) Logitech USB Receiver: (accel) acceleration threshold: 4 [ 40.662] (II) event8 - Logitech USB Receiver: is tagged by udev as: Touchpad [ 40.663] (II) event8 - Logitech USB Receiver: device is a touchpad [ 40.664] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse1) [ 40.664] (**) Logitech USB Receiver: Applying InputClass "touchpad" [ 40.664] (II) Using input driver 'libinput' for 'Logitech USB Receiver' [ 40.664] (**) Logitech USB Receiver: always reports core events [ 40.664] (**) Option "Device" "/dev/input/mouse1" [ 40.677] (II) mouse1 - not using input device '/dev/input/mouse1'. [ 40.677] (EE) libinput: Logitech USB Receiver: Failed to create a device for /dev/input/mouse1 [ 40.677] (EE) PreInit returned 2 for "Logitech USB Receiver" [ 40.677] (II) UnloadModule: "libinput" [ 40.677] (II) config/udev: Adding input device HD-Audio Generic HDMI/DP,pcm=3 (/dev/input/event9) [ 40.677] (II) No input driver specified, ignoring this device. [ 40.677] (II) This device may have been added with another device file. [ 40.678] (II) config/udev: Adding input device HD-Audio Generic HDMI/DP,pcm=7 (/dev/input/event10) [ 40.678] (II) No input driver specified, ignoring this device. [ 40.678] (II) This device may have been added with another device file. [ 40.678] (II) config/udev: Adding input device HD-Audio Generic HDMI/DP,pcm=8 (/dev/input/event11) [ 40.678] (II) No input driver specified, ignoring this device. [ 40.678] (II) This device may have been added with another device file. [ 40.678] (II) config/udev: Adding input device HD-Audio Generic HDMI/DP,pcm=9 (/dev/input/event12) [ 40.678] (II) No input driver specified, ignoring this device. [ 40.678] (II) This device may have been added with another device file. [ 40.679] (II) config/udev: Adding input device HD-Audio Generic Rear Mic (/dev/input/event13) [ 40.679] (II) No input driver specified, ignoring this device. [ 40.679] (II) This device may have been added with another device file. [ 40.679] (II) config/udev: Adding input device HD-Audio Generic Front Mic (/dev/input/event14) [ 40.679] (II) No input driver specified, ignoring this device. [ 40.679] (II) This device may have been added with another device file. [ 40.679] (II) config/udev: Adding input device HD-Audio Generic Line (/dev/input/event15) [ 40.679] (II) No input driver specified, ignoring this device. [ 40.679] (II) This device may have been added with another device file. [ 40.680] (II) config/udev: Adding input device HD-Audio Generic Line Out (/dev/input/event16) [ 40.680] (II) No input driver specified, ignoring this device. [ 40.680] (II) This device may have been added with another device file. [ 40.680] (II) config/udev: Adding input device HD-Audio Generic Front Headphone (/dev/input/event17) [ 40.680] (II) No input driver specified, ignoring this device. [ 40.680] (II) This device may have been added with another device file. [ 40.686] (**) Logitech USB Receiver Consumer Control: Applying InputClass "evdev keyboard catchall" [ 40.686] (**) Logitech USB Receiver Consumer Control: Applying InputClass "libinput keyboard catchall" [ 40.686] (**) Logitech USB Receiver Consumer Control: Applying InputClass "system-keyboard" [ 40.686] (II) Using input driver 'libinput' for 'Logitech USB Receiver Consumer Control' [ 40.687] (**) Logitech USB Receiver Consumer Control: always reports core events [ 40.687] (**) Option "Device" "/dev/input/event5" [ 40.687] (II) libinput: Logitech USB Receiver Consumer Control: is a virtual subdevice [ 40.687] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:02.1/0000:01:00.0/usb1/1-5/1-5:1.1/0003:046D:C548.0002/input/input5/event5" [ 40.687] (II) XINPUT: Adding extended input device "Logitech USB Receiver Consumer Control" (type: KEYBOARD, id 14) [ 40.687] (**) Option "xkb_layout" "de" [ 40.687] (WW) Option "xkb_variant" requires a string value [ 41.835] (II) event1 - Power Button: device removed [ 41.835] (II) event2 - Video Bus: device removed [ 41.846] (II) event0 - Power Button: device removed [ 41.846] (II) event3 - Logitech USB Receiver: device removed [ 41.846] (II) event4 - Logitech USB Receiver Mouse: device removed [ 41.863] (II) event6 - Logitech USB Receiver System Control: device removed [ 41.863] (II) event8 - Logitech USB Receiver: device removed [ 41.878] (II) event5 - Logitech USB Receiver Consumer Control: device removed [ 41.878] (II) AIGLX: Suspending AIGLX clients for VT switch [ 279.789] (II) config/udev: removing device Power Button [ 279.789] (II) UnloadModule: "libinput" [ 279.789] (II) config/udev: Adding input device Power Button (/dev/input/event1) [ 279.789] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 279.789] (**) Power Button: Applying InputClass "libinput keyboard catchall" [ 279.789] (**) Power Button: Applying InputClass "system-keyboard" [ 279.789] (II) Using input driver 'libinput' for 'Power Button' [ 279.789] (**) Power Button: always reports core events [ 279.789] (**) Option "Device" "/dev/input/event1" [ 279.790] (II) event1 - Power Button: is tagged by udev as: Keyboard [ 279.790] (II) event1 - Power Button: device is a keyboard [ 279.791] (II) event1 - Power Button: device removed [ 279.791] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1" [ 279.791] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6) [ 279.791] (**) Option "xkb_layout" "de" [ 279.791] (WW) Option "xkb_variant" requires a string value [ 279.795] (II) config/udev: removing device Video Bus [ 279.795] (II) UnloadModule: "libinput" [ 279.796] (II) config/udev: Adding input device Video Bus (/dev/input/event2) [ 279.796] (**) Video Bus: Applying InputClass "evdev keyboard catchall" [ 279.796] (**) Video Bus: Applying InputClass "libinput keyboard catchall" [ 279.796] (**) Video Bus: Applying InputClass "system-keyboard" [ 279.796] (II) Using input driver 'libinput' for 'Video Bus' [ 279.796] (**) Video Bus: always reports core events [ 279.796] (**) Option "Device" "/dev/input/event2" [ 279.798] (II) event2 - Video Bus: is tagged by udev as: Keyboard [ 279.798] (II) event2 - Video Bus: device is a keyboard [ 279.826] (II) event2 - Video Bus: device removed [ 279.826] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:15/LNXVIDEO:01/input/input2/event2" [ 279.826] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7) [ 279.826] (**) Option "xkb_layout" "de" [ 279.826] (WW) Option "xkb_variant" requires a string value [ 279.827] (II) config/udev: removing device Power Button [ 279.827] (II) UnloadModule: "libinput" [ 279.827] (II) config/udev: Adding input device Power Button (/dev/input/event0) [ 279.827] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 279.827] (**) Power Button: Applying InputClass "libinput keyboard catchall" [ 279.827] (**) Power Button: Applying InputClass "system-keyboard" [ 279.827] (II) Using input driver 'libinput' for 'Power Button' [ 279.827] (**) Power Button: always reports core events [ 279.827] (**) Option "Device" "/dev/input/event0" [ 279.828] (II) event0 - Power Button: is tagged by udev as: Keyboard [ 279.828] (II) event0 - Power Button: device is a keyboard [ 279.828] (II) event0 - Power Button: device removed [ 279.828] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0" [ 279.828] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8) [ 279.828] (**) Option "xkb_layout" "de" [ 279.828] (WW) Option "xkb_variant" requires a string value [ 279.829] (II) config/udev: Adding input device Logitech USB Receiver Mouse (/dev/input/mouse0) [ 279.829] (II) No input driver specified, ignoring this device. [ 279.829] (II) This device may have been added with another device file. [ 279.829] (II) config/udev: removing device Logitech USB Receiver Mouse [ 279.829] (II) UnloadModule: "libinput" [ 279.830] (II) config/udev: Adding input device Logitech USB Receiver Mouse (/dev/input/event4) [ 279.830] (**) Logitech USB Receiver Mouse: Applying InputClass "evdev pointer catchall" [ 279.830] (**) Logitech USB Receiver Mouse: Applying InputClass "libinput pointer catchall" [ 279.830] (II) Using input driver 'libinput' for 'Logitech USB Receiver Mouse' [ 279.830] (**) Logitech USB Receiver Mouse: always reports core events [ 279.830] (**) Option "Device" "/dev/input/event4" [ 279.842] (II) event4 - Logitech USB Receiver Mouse: is tagged by udev as: Mouse [ 279.850] (II) event4 - Logitech USB Receiver Mouse: device set to 1000 DPI [ 279.863] (II) event4 - Logitech USB Receiver Mouse: device is a pointer [ 279.864] (II) event4 - Logitech USB Receiver Mouse: device removed [ 279.864] (II) libinput: Logitech USB Receiver Mouse: Step value 0 was provided, libinput Fallback acceleration function is used. [ 279.864] (II) libinput: Logitech USB Receiver Mouse: Step value 0 was provided, libinput Fallback acceleration function is used. [ 279.864] (II) libinput: Logitech USB Receiver Mouse: Step value 0 was provided, libinput Fallback acceleration function is used. [ 279.864] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:02.1/0000:01:00.0/usb1/1-5/1-5:1.1/0003:046D:C548.0002/input/input4/event4" [ 279.864] (II) XINPUT: Adding extended input device "Logitech USB Receiver Mouse" (type: MOUSE, id 10) [ 279.864] (**) Option "AccelerationScheme" "none" [ 279.864] (**) Logitech USB Receiver Mouse: (accel) selected scheme none/0 [ 279.864] (**) Logitech USB Receiver Mouse: (accel) acceleration factor: 2.000 [ 279.864] (**) Logitech USB Receiver Mouse: (accel) acceleration threshold: 4 [ 279.865] (II) config/udev: removing device Logitech USB Receiver System Control [ 279.865] (II) UnloadModule: "libinput" [ 279.865] (II) config/udev: Adding input device Logitech USB Receiver System Control (/dev/input/event6) [ 279.865] (**) Logitech USB Receiver System Control: Applying InputClass "evdev keyboard catchall" [ 279.865] (**) Logitech USB Receiver System Control: Applying InputClass "libinput keyboard catchall" [ 279.865] (**) Logitech USB Receiver System Control: Applying InputClass "system-keyboard" [ 279.865] (II) Using input driver 'libinput' for 'Logitech USB Receiver System Control' [ 279.865] (**) Logitech USB Receiver System Control: always reports core events [ 279.865] (**) Option "Device" "/dev/input/event6" [ 279.888] (II) event6 - Logitech USB Receiver System Control: is tagged by udev as: Keyboard [ 279.893] (II) event6 - Logitech USB Receiver System Control: device is a keyboard [ 279.895] (II) event6 - Logitech USB Receiver System Control: device removed [ 279.895] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:02.1/0000:01:00.0/usb1/1-5/1-5:1.1/0003:046D:C548.0002/input/input6/event6" [ 279.895] (II) XINPUT: Adding extended input device "Logitech USB Receiver System Control" (type: KEYBOARD, id 12) [ 279.895] (**) Option "xkb_layout" "de" [ 279.895] (WW) Option "xkb_variant" requires a string value [ 279.896] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse1) [ 279.896] (**) Logitech USB Receiver: Applying InputClass "touchpad" [ 279.896] (II) Using input driver 'libinput' for 'Logitech USB Receiver' [ 279.896] (**) Logitech USB Receiver: always reports core events [ 279.896] (**) Option "Device" "/dev/input/mouse1" [ 279.918] (II) mouse1 - not using input device '/dev/input/mouse1'. [ 279.918] (EE) libinput: Logitech USB Receiver: Failed to create a device for /dev/input/mouse1 [ 279.918] (EE) PreInit returned 2 for "Logitech USB Receiver" [ 279.918] (II) UnloadModule: "libinput" [ 279.918] (II) config/udev: Adding input device HD-Audio Generic HDMI/DP,pcm=3 (/dev/input/event9) [ 279.918] (II) No input driver specified, ignoring this device. [ 279.918] (II) This device may have been added with another device file. [ 279.918] (II) config/udev: removing device Logitech USB Receiver Consumer Control [ 279.918] (II) UnloadModule: "libinput" [ 279.918] (II) config/udev: removing device Logitech USB Receiver Consumer Control [ 279.918] (II) UnloadModule: "libinput" [ 279.918] (II) config/udev: Adding input device Logitech USB Receiver Consumer Control (/dev/input/event5) [ 279.918] (**) Logitech USB Receiver Consumer Control: Applying InputClass "evdev keyboard catchall" [ 279.918] (**) Logitech USB Receiver Consumer Control: Applying InputClass "libinput keyboard catchall" [ 279.918] (**) Logitech USB Receiver Consumer Control: Applying InputClass "system-keyboard" [ 279.918] (II) Using input driver 'libinput' for 'Logitech USB Receiver Consumer Control' [ 279.918] (**) Logitech USB Receiver Consumer Control: always reports core events [ 279.918] (**) Option "Device" "/dev/input/event5" [ 279.919] (II) event5 - Logitech USB Receiver Consumer Control: is tagged by udev as: Keyboard [ 279.920] (II) event5 - Logitech USB Receiver Consumer Control: device is a keyboard [ 279.920] (II) event5 - Logitech USB Receiver Consumer Control: device removed [ 279.920] (II) libinput: Logitech USB Receiver Consumer Control: needs a virtual subdevice [ 279.920] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:02.1/0000:01:00.0/usb1/1-5/1-5:1.1/0003:046D:C548.0002/input/input5/event5" [ 279.920] (II) XINPUT: Adding extended input device "Logitech USB Receiver Consumer Control" (type: MOUSE, id 11) [ 279.920] (**) Option "AccelerationScheme" "none" [ 279.920] (**) Logitech USB Receiver Consumer Control: (accel) selected scheme none/0 [ 279.920] (**) Logitech USB Receiver Consumer Control: (accel) acceleration factor: 2.000 [ 279.920] (**) Logitech USB Receiver Consumer Control: (accel) acceleration threshold: 4 [ 279.920] (**) Logitech USB Receiver Consumer Control: Applying InputClass "evdev keyboard catchall" [ 279.920] (**) Logitech USB Receiver Consumer Control: Applying InputClass "libinput keyboard catchall" [ 279.920] (**) Logitech USB Receiver Consumer Control: Applying InputClass "system-keyboard" [ 279.920] (II) Using input driver 'libinput' for 'Logitech USB Receiver Consumer Control' [ 279.920] (**) Logitech USB Receiver Consumer Control: always reports core events [ 279.920] (**) Option "Device" "/dev/input/event5" [ 279.920] (II) libinput: Logitech USB Receiver Consumer Control: is a virtual subdevice [ 279.920] (EE) libinput: Logitech USB Receiver Consumer Control: Parent device not available [ 279.921] (II) event5 - Logitech USB Receiver Consumer Control: is tagged by udev as: Keyboard [ 279.921] (II) event5 - Logitech USB Receiver Consumer Control: device is a keyboard [ 279.921] (II) event5 - Logitech USB Receiver Consumer Control: device removed [ 279.921] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:02.1/0000:01:00.0/usb1/1-5/1-5:1.1/0003:046D:C548.0002/input/input5/event5" [ 279.921] (II) XINPUT: Adding extended input device "Logitech USB Receiver Consumer Control" (type: KEYBOARD, id 14) [ 279.921] (**) Option "xkb_layout" "de" [ 279.921] (WW) Option "xkb_variant" requires a string value [ 279.921] (II) config/udev: Adding input device HD-Audio Generic Line Out (/dev/input/event16) [ 279.921] (II) No input driver specified, ignoring this device. [ 279.921] (II) This device may have been added with another device file. [ 279.922] (II) config/udev: Adding input device HD-Audio Generic HDMI/DP,pcm=9 (/dev/input/event12) [ 279.922] (II) No input driver specified, ignoring this device. [ 279.922] (II) This device may have been added with another device file. [ 279.922] (II) config/udev: Adding input device HD-Audio Generic HDMI/DP,pcm=8 (/dev/input/event11) [ 279.922] (II) No input driver specified, ignoring this device. [ 279.922] (II) This device may have been added with another device file. [ 279.922] (II) config/udev: Adding input device HD-Audio Generic Front Mic (/dev/input/event14) [ 279.922] (II) No input driver specified, ignoring this device. [ 279.922] (II) This device may have been added with another device file. [ 279.922] (II) config/udev: Adding input device HD-Audio Generic Line (/dev/input/event15) [ 279.922] (II) No input driver specified, ignoring this device. [ 279.922] (II) This device may have been added with another device file. [ 279.922] (II) config/udev: Adding input device HD-Audio Generic HDMI/DP,pcm=7 (/dev/input/event10) [ 279.922] (II) No input driver specified, ignoring this device. [ 279.922] (II) This device may have been added with another device file. [ 279.922] (II) config/udev: removing device Logitech USB Receiver [ 279.922] (II) UnloadModule: "libinput" [ 279.923] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event3) [ 279.923] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall" [ 279.923] (**) Logitech USB Receiver: Applying InputClass "libinput keyboard catchall" [ 279.923] (**) Logitech USB Receiver: Applying InputClass "system-keyboard" [ 279.923] (II) Using input driver 'libinput' for 'Logitech USB Receiver' [ 279.923] (**) Logitech USB Receiver: always reports core events [ 279.923] (**) Option "Device" "/dev/input/event3" [ 279.924] (II) event3 - Logitech USB Receiver: is tagged by udev as: Keyboard [ 279.924] (II) event3 - Logitech USB Receiver: device is a keyboard [ 279.924] (II) event3 - Logitech USB Receiver: device removed [ 279.924] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:02.1/0000:01:00.0/usb1/1-5/1-5:1.0/0003:046D:C548.0001/input/input3/event3" [ 279.924] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 9) [ 279.924] (**) Option "xkb_layout" "de" [ 279.924] (WW) Option "xkb_variant" requires a string value [ 279.924] (II) config/udev: removing device Logitech USB Receiver [ 279.924] (II) UnloadModule: "libinput" [ 279.925] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event8) [ 279.925] (**) Logitech USB Receiver: Applying InputClass "evdev touchpad catchall" [ 279.925] (**) Logitech USB Receiver: Applying InputClass "libinput touchpad catchall" [ 279.925] (**) Logitech USB Receiver: Applying InputClass "touchpad" [ 279.925] (II) Using input driver 'libinput' for 'Logitech USB Receiver' [ 279.925] (**) Logitech USB Receiver: always reports core events [ 279.925] (**) Option "Device" "/dev/input/event8" [ 279.926] (II) event8 - Logitech USB Receiver: is tagged by udev as: Touchpad [ 279.927] (II) event8 - Logitech USB Receiver: device is a touchpad [ 279.927] (II) event8 - Logitech USB Receiver: device removed [ 279.927] (**) Option "Tapping" "on" [ 279.927] (**) Option "TappingButtonMap" "lrm" [ 279.927] (II) libinput: Logitech USB Receiver: Step value 0 was provided, libinput Fallback acceleration function is used. [ 279.927] (II) libinput: Logitech USB Receiver: Step value 0 was provided, libinput Fallback acceleration function is used. [ 279.927] (II) libinput: Logitech USB Receiver: Step value 0 was provided, libinput Fallback acceleration function is used. [ 279.927] (**) Option "NaturalScrolling" "on" [ 279.927] (**) Option "ScrollMethod" "twofinger" [ 279.927] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:02.1/0000:01:00.0/usb1/1-5/1-5:1.3/0003:046D:C548.0004/input/input9/event8" [ 279.927] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: TOUCHPAD, id 13) [ 279.928] (**) Option "AccelerationScheme" "none" [ 279.928] (**) Logitech USB Receiver: (accel) selected scheme none/0 [ 279.928] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000 [ 279.928] (**) Logitech USB Receiver: (accel) acceleration threshold: 4 [ 279.928] (II) config/udev: Adding input device HD-Audio Generic Front Headphone (/dev/input/event17) [ 279.928] (II) No input driver specified, ignoring this device. [ 279.928] (II) This device may have been added with another device file. [ 279.929] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event7) [ 279.929] (II) No input driver specified, ignoring this device. [ 279.929] (II) This device may have been added with another device file. [ 279.929] (II) config/udev: Adding input device HD-Audio Generic Rear Mic (/dev/input/event13) [ 279.929] (II) No input driver specified, ignoring this device. [ 279.929] (II) This device may have been added with another device file. [ 469.553] (II) UnloadModule: "libinput" [ 469.554] (II) UnloadModule: "libinput" [ 469.554] (II) UnloadModule: "libinput" [ 469.554] (II) UnloadModule: "libinput" [ 469.554] (II) UnloadModule: "libinput" [ 469.554] (II) UnloadModule: "libinput" [ 469.554] (II) UnloadModule: "libinput" [ 469.554] (II) UnloadModule: "libinput" [ 469.554] (II) UnloadModule: "libinput" [ 469.555] (II) Server terminated successfully (0). Closing log file.