[ 7.926] (--) Log file renamed from "/var/log/Xorg.pid-1276.log" to "/var/log/Xorg.0.log" [ 7.927] X.Org X Server 1.21.1.16 X Protocol Version 11, Revision 0 [ 7.927] Current Operating System: Linux XXX 6.14.6-arch1-1 #1 SMP PREEMPT_DYNAMIC Fri, 09 May 2025 17:36:18 +0000 x86_64 [ 7.927] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=HASH_31D-FC63-ECD6-C0FA-56FD58774E34 rw rootflags=subvol=@ zswap.enabled=0 rootfstype=btrfs loglevel=3 quiet nvidia.NVreg_PreserveVideoMemoryAllocations=1 [ 7.927] [ 7.927] Current version of pixman: 0.46.0 [ 7.927] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 7.927] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 7.927] (==) Log file: "/var/log/Xorg.0.log", Time: Fri May 23 16:23:44 2025 [ 7.927] (==) Using config directory: "/etc/X11/xorg.conf.d" [ 7.927] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [ 7.928] (==) No Layout section. Using the first Screen section. [ 7.928] (==) No screen section available. Using defaults. [ 7.928] (**) |-->Screen "Default Screen Section" (0) [ 7.928] (**) | |-->Monitor "<default monitor>" [ 7.928] (==) No monitor specified for screen "Default Screen Section". Using a default monitor configuration. [ 7.928] (**) Allowing byte-swapped clients [ 7.928] (==) Automatically adding devices [ 7.928] (==) Automatically enabling devices [ 7.928] (==) Automatically adding GPU devices [ 7.928] (==) Automatically binding GPU devices [ 7.928] (==) Max clients allowed: 256, resource mask: 0x1fffff [ 7.928] (WW) The directory "/usr/share/fonts/misc" does not exist. [ 7.928] Entry deleted from font path. [ 7.928] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/TTF". [ 7.928] Entry deleted from font path. [ 7.928] (Run 'mkfontdir' on "/usr/share/fonts/TTF"). [ 7.928] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/OTF". [ 7.928] Entry deleted from font path. [ 7.928] (Run 'mkfontdir' on "/usr/share/fonts/OTF"). [ 7.928] (WW) The directory "/usr/share/fonts/Type1" does not exist. [ 7.928] Entry deleted from font path. [ 7.928] (WW) The directory "/usr/share/fonts/100dpi" does not exist. [ 7.928] Entry deleted from font path. [ 7.928] (WW) The directory "/usr/share/fonts/75dpi" does not exist. [ 7.928] Entry deleted from font path. [ 7.928] (==) FontPath set to: [ 7.928] (==) ModulePath set to "/usr/lib/xorg/modules" [ 7.928] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 7.929] (II) Module ABI versions: [ 7.929] X.Org ANSI C Emulation: 0.4 [ 7.929] X.Org Video Driver: 25.2 [ 7.929] X.Org XInput driver : 24.4 [ 7.929] X.Org Server Extension : 10.0 [ 7.929] (++) using VT number 2 [ 7.929] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration [ 7.930] (II) xfree86: Adding drm device (/dev/dri/card0) [ 7.930] (II) Platform probe for /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/drm/card0 [ 7.930] (II) xfree86: Adding drm device (/dev/dri/card1) [ 7.930] (II) Platform probe for /sys/devices/pci0000:00/0000:00:02.0/drm/card1 [ 7.947] (**) OutputClass "nvidia" ModulePath extended to "/usr/lib/nvidia/xorg,/usr/lib/xorg/modules,/usr/lib/xorg/modules" [ 7.949] (--) PCI:*(0@0:2:0) 8086:46a6:17aa:3ae6 rev 12, Mem @ 0x6103000000/16777216, 0x4000000000/268435456, I/O @ 0x00006000/64, BIOS @ 0x????????/131072 [ 7.949] (--) PCI: (1@0:0:0) 10de:25e0:17aa:382f rev 161, Mem @ 0x60000000/16777216, 0x6000000000/268435456, 0x6010000000/33554432, I/O @ 0x00005000/128, BIOS @ 0x????????/524288 [ 7.949] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory) [ 7.949] (II) LoadModule: "glx" [ 7.949] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so [ 7.959] (II) Module glx: vendor="X.Org Foundation" [ 7.959] compiled for 1.21.1.16, module version = 1.0.0 [ 7.959] ABI class: X.Org Server Extension, version 10.0 [ 7.959] (II) Applying OutputClass "nvidia" to /dev/dri/card0 [ 7.959] loading driver: nvidia [ 7.959] (==) Matched intel as autoconfigured driver 0 [ 7.959] (==) Matched nvidia as autoconfigured driver 1 [ 7.959] (==) Matched nouveau as autoconfigured driver 2 [ 7.959] (==) Matched nv as autoconfigured driver 3 [ 7.959] (==) Matched modesetting as autoconfigured driver 4 [ 7.959] (==) Matched fbdev as autoconfigured driver 5 [ 7.959] (==) Matched vesa as autoconfigured driver 6 [ 7.959] (==) Assigned the driver to the xf86ConfigLayout [ 7.959] (II) LoadModule: "intel" [ 7.959] (WW) Warning, couldn't open module intel [ 7.959] (EE) Failed to load module "intel" (module does not exist, 0) [ 7.959] (II) LoadModule: "nvidia" [ 7.959] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so [ 7.964] (II) Module nvidia: vendor="NVIDIA Corporation" [ 7.964] compiled for 1.6.99.901, module version = 1.0.0 [ 7.964] Module class: X.Org Video Driver [ 7.964] (II) LoadModule: "nouveau" [ 7.964] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so [ 7.966] (II) Module nouveau: vendor="X.Org Foundation" [ 7.966] compiled for 1.21.1.14, module version = 1.0.18 [ 7.966] Module class: X.Org Video Driver [ 7.966] ABI class: X.Org Video Driver, version 25.2 [ 7.966] (II) LoadModule: "nv" [ 7.966] (WW) Warning, couldn't open module nv [ 7.966] (EE) Failed to load module "nv" (module does not exist, 0) [ 7.966] (II) LoadModule: "modesetting" [ 7.966] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so [ 7.968] (II) Module modesetting: vendor="X.Org Foundation" [ 7.968] compiled for 1.21.1.16, module version = 1.21.1 [ 7.968] Module class: X.Org Video Driver [ 7.968] ABI class: X.Org Video Driver, version 25.2 [ 7.968] (II) LoadModule: "fbdev" [ 7.968] (WW) Warning, couldn't open module fbdev [ 7.968] (EE) Failed to load module "fbdev" (module does not exist, 0) [ 7.968] (II) LoadModule: "vesa" [ 7.968] (WW) Warning, couldn't open module vesa [ 7.968] (EE) Failed to load module "vesa" (module does not exist, 0) [ 7.968] (II) NVIDIA dlloader X Driver 570.144 Thu Apr 10 20:05:34 UTC 2025 [ 7.968] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs [ 7.968] (II) NOUVEAU driver [ 7.968] (II) NOUVEAU driver for NVIDIA chipset families : [ 7.968] RIVA TNT (NV04) [ 7.968] RIVA TNT2 (NV05) [ 7.968] GeForce 256 (NV10) [ 7.968] GeForce 2 (NV11, NV15) [ 7.969] GeForce 4MX (NV17, NV18) [ 7.969] GeForce 3 (NV20) [ 7.969] GeForce 4Ti (NV25, NV28) [ 7.969] GeForce FX (NV3x) [ 7.969] GeForce 6 (NV4x) [ 7.969] GeForce 7 (G7x) [ 7.969] GeForce 8 (G8x) [ 7.969] GeForce 9 (G9x) [ 7.969] GeForce GTX 2xx/3xx (GT2xx) [ 7.969] GeForce GTX 4xx/5xx (GFxxx) [ 7.969] GeForce GTX 6xx/7xx (GKxxx) [ 7.969] GeForce GTX 9xx (GMxxx) [ 7.969] GeForce GTX 10xx (GPxxx) [ 7.969] (II) modesetting: Driver for Modesetting Kernel Drivers: kms [ 7.977] (II) modeset(0): using drv /dev/dri/card1 [ 7.978] (II) Loading sub module "fb" [ 7.978] (II) LoadModule: "fb" [ 7.978] (II) Module "fb" already built-in [ 7.978] (II) Loading sub module "wfb" [ 7.978] (II) LoadModule: "wfb" [ 7.978] (II) Loading /usr/lib/xorg/modules/libwfb.so [ 7.979] (II) Module wfb: vendor="X.Org Foundation" [ 7.979] compiled for 1.21.1.16, module version = 1.0.0 [ 7.979] ABI class: X.Org ANSI C Emulation, version 0.4 [ 7.980] (II) modeset(0): Creating default Display subsection in Screen section "Default Screen Section" for depth/fbbpp 24/32 [ 7.980] (==) modeset(0): Depth 24, (==) framebuffer bpp 32 [ 7.980] (==) modeset(0): RGB weight 888 [ 7.980] (==) modeset(0): Default visual is TrueColor [ 7.980] (II) Loading sub module "glamoregl" [ 7.980] (II) LoadModule: "glamoregl" [ 7.980] (II) Loading /usr/lib/xorg/modules/libglamoregl.so [ 7.988] (II) Module glamoregl: vendor="X.Org Foundation" [ 7.988] compiled for 1.21.1.16, module version = 1.0.1 [ 7.988] ABI class: X.Org ANSI C Emulation, version 0.4 [ 8.234] (II) modeset(0): glamor X acceleration enabled on Mesa Intel(R) Iris(R) Xe Graphics (ADL GT2) [ 8.234] (II) modeset(0): glamor initialized [ 8.234] (==) modeset(0): VariableRefresh: disabled [ 8.234] (==) modeset(0): AsyncFlipSecondaries: disabled [ 8.236] (II) modeset(0): Output eDP-1 has no monitor section [ 8.289] (II) modeset(0): Output DP-1 has no monitor section [ 8.289] (II) modeset(0): Output DP-2 has no monitor section [ 8.292] (II) modeset(0): EDID for output eDP-1 [ 8.292] (II) modeset(0): Manufacturer: CSO Model: 1612 Serial#: ... [ 8.292] (II) modeset(0): Year: 2021 Week: 0 [ 8.292] (II) modeset(0): EDID Version: 1.4 [ 8.292] (II) modeset(0): Digital Display Input [ 8.292] (II) modeset(0): 10 bits per channel [ 8.292] (II) modeset(0): Digital interface is DisplayPort [ 8.292] (II) modeset(0): Max Image Size [cm]: horiz.: 34 vert.: 22 [ 8.292] (II) modeset(0): Gamma: 2.20 [ 8.292] (II) modeset(0): No DPMS capabilities specified [ 8.292] (II) modeset(0): Supported color encodings: RGB 4:4:4 [ 8.292] (II) modeset(0): First detailed timing is preferred mode [ 8.292] (II) modeset(0): Preferred mode is native pixel format and refresh rate [ 8.292] (II) modeset(0): Display is continuous-frequency [ 8.292] (II) modeset(0): redX: 0.640 redY: 0.330 greenX: 0.300 greenY: 0.600 [ 8.292] (II) modeset(0): blueX: 0.150 blueY: 0.060 whiteX: 0.313 whiteY: 0.329 [ 8.292] (II) modeset(0): Manufacturer's mask: 0 [ 8.292] (II) modeset(0): Supported detailed timing: [ 8.292] (II) modeset(0): clock: 282.7 MHz Image Size: 345 x 215 mm [ 8.292] (II) modeset(0): h_active: 2560 h_sync: 2608 h_sync_end 2640 h_blank_end 2720 h_border: 0 [ 8.292] (II) modeset(0): v_active: 1600 v_sync: 1603 v_sync_end 1609 v_blanking: 1732 v_border: 0 [ 8.292] (II) modeset(0): Ranges: V min: 60 V max: 165 Hz, H min: 286 H max: 286 kHz, PixClock max 785 MHz [ 8.292] (II) modeset(0): CSOT T3 [ 8.292] (II) modeset(0): MNG007DA1-G [ 8.292] (II) modeset(0): Number of EDID sections to follow: 2 [ 8.292] (II) modeset(0): EDID (in hex): [ 8.292] (II) modeset(0): 00ffffffffffff000e6f121600000000 [ 8.292] (II) modeset(0): 001f0104b522167803ee95a3544c9926 [ 8.292] (II) modeset(0): 0f505400000001010101010101010101 [ 8.292] (II) modeset(0): 0101010101016e6e00a0a04084603020 [ 8.292] (II) modeset(0): 360059d710000018000000fd0c3ca51f [ 8.292] (II) modeset(0): 1f4e010a202020202020000000fe0043 [ 8.292] (II) modeset(0): 534f542054330a2020202020000000fe [ 8.292] (II) modeset(0): 004d4e473030374441312d470a2002d9 [ 8.292] (II) modeset(0): 02031d00e3058000e60605016a6a246d [ 8.292] (II) modeset(0): 1a000002033ca500046a246a24000000 [ 8.292] (II) modeset(0): 00000000000000000000000000000000 [ 8.292] (II) modeset(0): 00000000000000000000000000000000 [ 8.292] (II) modeset(0): 00000000000000000000000000000000 [ 8.292] (II) modeset(0): 00000000000000000000000000000000 [ 8.292] (II) modeset(0): 00000000000000000000000000000000 [ 8.292] (II) modeset(0): 000000000000000000000000000000ff [ 8.292] (II) modeset(0): 7013790000030114ac2f0185ff099f00 [ 8.292] (II) modeset(0): 2f001f003f0683000200050000000000 [ 8.292] (II) modeset(0): 00000000000000000000000000000000 [ 8.292] (II) modeset(0): 00000000000000000000000000000000 [ 8.292] (II) modeset(0): 00000000000000000000000000000000 [ 8.292] (II) modeset(0): 00000000000000000000000000000000 [ 8.292] (II) modeset(0): 00000000000000000000000000000000 [ 8.292] (II) modeset(0): 00000000000000000000000000003790 [ 8.292] (II) modeset(0): Printing probed modes for output eDP-1 [ 8.292] (II) modeset(0): Modeline "2560x1600"x165.0 777.41 2560 2608 2640 2720 1600 1603 1609 1732 -hsync -vsync (285.8 kHz eP) [ 8.292] (II) modeset(0): Modeline "2560x1600"x60.0 282.70 2560 2608 2640 2720 1600 1603 1609 1732 -hsync -vsync (103.9 kHz eP) [ 8.292] (II) modeset(0): Modeline "2560x1600"x60.0 348.50 2560 2760 3032 3504 1600 1603 1609 1658 -hsync +vsync (99.5 kHz d) [ 8.292] (II) modeset(0): Modeline "2560x1600"x60.0 268.50 2560 2608 2640 2720 1600 1603 1609 1646 +hsync -vsync (98.7 kHz d) [ 8.292] (II) modeset(0): Modeline "2560x1440"x60.0 638.25 2560 2780 3064 3568 1440 1441 1444 1491 doublescan -hsync +vsync (178.9 kHz d) [ 8.292] (II) modeset(0): Modeline "2560x1440"x60.0 469.12 2560 2584 2600 2640 1440 1441 1444 1481 doublescan +hsync -vsync (177.7 kHz d) [ 8.292] (II) modeset(0): Modeline "2560x1440"x60.0 312.25 2560 2752 3024 3488 1440 1443 1448 1493 -hsync +vsync (89.5 kHz d) [ 8.292] (II) modeset(0): Modeline "2560x1440"x60.0 241.50 2560 2608 2640 2720 1440 1443 1448 1481 +hsync -vsync (88.8 kHz d) [ 8.292] (II) modeset(0): Modeline "2048x1536"x85.0 388.04 2048 2216 2440 2832 1536 1537 1540 1612 -hsync +vsync (137.0 kHz d) [ 8.292] (II) modeset(0): Modeline "2048x1536"x75.0 340.48 2048 2216 2440 2832 1536 1537 1540 1603 -hsync +vsync (120.2 kHz d) [ 8.292] (II) modeset(0): Modeline "2048x1536"x60.0 266.95 2048 2200 2424 2800 1536 1537 1540 1589 -hsync +vsync (95.3 kHz d) [ 8.292] (II) modeset(0): Modeline "1920x1440"x85.0 341.35 1920 2072 2288 2656 1440 1441 1444 1512 -hsync +vsync (128.5 kHz d) [ 8.292] (II) modeset(0): Modeline "1920x1440"x75.0 297.00 1920 2064 2288 2640 1440 1441 1444 1500 -hsync +vsync (112.5 kHz d) [ 8.292] (II) modeset(0): Modeline "1920x1440"x60.0 234.00 1920 2048 2256 2600 1440 1441 1444 1500 -hsync +vsync (90.0 kHz d) [ 8.292] (II) modeset(0): Modeline "1856x1392"x75.0 288.00 1856 1984 2208 2560 1392 1393 1396 1500 -hsync +vsync (112.5 kHz d) [ 8.292] (II) modeset(0): Modeline "1856x1392"x60.0 218.30 1856 1952 2176 2528 1392 1393 1396 1439 -hsync +vsync (86.4 kHz d) [ 8.292] (II) modeset(0): Modeline "1792x1344"x75.0 261.00 1792 1888 2104 2456 1344 1345 1348 1417 -hsync +vsync (106.3 kHz d) [ 8.292] (II) modeset(0): Modeline "1792x1344"x60.0 204.80 1792 1920 2120 2448 1344 1345 1348 1394 -hsync +vsync (83.7 kHz d) [ 8.292] (II) modeset(0): Modeline "2048x1152"x60.0 406.50 2048 2220 2444 2840 1152 1153 1156 1193 doublescan -hsync +vsync (143.1 kHz d) [ 8.292] (II) modeset(0): Modeline "2048x1152"x60.0 302.50 2048 2072 2088 2128 1152 1153 1156 1185 doublescan +hsync -vsync (142.2 kHz d) [ 8.292] (II) modeset(0): Modeline "2048x1152"x59.9 197.00 2048 2184 2400 2752 1152 1155 1160 1195 -hsync +vsync (71.6 kHz d) [ 8.292] (II) modeset(0): Modeline "2048x1152"x59.9 156.75 2048 2096 2128 2208 1152 1155 1160 1185 +hsync -vsync (71.0 kHz d) [ 8.292] (II) modeset(0): Modeline "1920x1200"x59.9 193.25 1920 2056 2256 2592 1200 1203 1209 1245 -hsync +vsync (74.6 kHz d) [ 8.292] (II) modeset(0): Modeline "1920x1200"x60.0 154.00 1920 1968 2000 2080 1200 1203 1209 1235 +hsync -vsync (74.0 kHz d) [ 8.292] (II) modeset(0): Modeline "1920x1080"x60.0 356.38 1920 2080 2288 2656 1080 1081 1084 1118 doublescan -hsync +vsync (134.2 kHz d) [ 8.292] (II) modeset(0): Modeline "1920x1080"x60.0 266.50 1920 1944 1960 2000 1080 1081 1084 1111 doublescan +hsync -vsync (133.2 kHz d) [ 8.292] (II) modeset(0): Modeline "1920x1080"x60.0 173.00 1920 2048 2248 2576 1080 1083 1088 1120 -hsync +vsync (67.2 kHz d) [ 8.292] (II) modeset(0): Modeline "1920x1080"x59.9 138.50 1920 1968 2000 2080 1080 1083 1088 1111 +hsync -vsync (66.6 kHz d) [ 8.292] (II) modeset(0): Modeline "1600x1200"x85.0 229.50 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (106.2 kHz d) [ 8.292] (II) modeset(0): Modeline "1600x1200"x75.0 202.50 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (93.8 kHz d) [ 8.292] (II) modeset(0): Modeline "1600x1200"x70.0 189.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (87.5 kHz d) [ 8.292] (II) modeset(0): Modeline "1600x1200"x65.0 175.50 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (81.2 kHz d) [ 8.292] (II) modeset(0): Modeline "1600x1200"x60.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz d) [ 8.292] (II) modeset(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz d) [ 8.292] (II) modeset(0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz d) [ 8.292] (II) modeset(0): Modeline "1400x1050"x74.8 155.80 1400 1464 1784 1912 1050 1052 1064 1090 +hsync +vsync (81.5 kHz d) [ 8.292] (II) modeset(0): Modeline "1400x1050"x60.0 122.00 1400 1488 1640 1880 1050 1052 1064 1082 +hsync +vsync (64.9 kHz d) [ 8.292] (II) modeset(0): Modeline "1600x900"x60.0 246.00 1600 1728 1900 2200 900 901 904 932 doublescan -hsync +vsync (111.8 kHz d) [ 8.292] (II) modeset(0): Modeline "1600x900"x59.9 186.50 1600 1624 1640 1680 900 901 904 926 doublescan +hsync -vsync (111.0 kHz d) [ 8.292] (II) modeset(0): Modeline "1600x900"x59.9 118.25 1600 1696 1856 2112 900 903 908 934 -hsync +vsync (56.0 kHz d) [ 8.292] (II) modeset(0): Modeline "1600x900"x59.8 97.50 1600 1648 1680 1760 900 903 908 926 +hsync -vsync (55.4 kHz d) [ 8.292] (II) modeset(0): Modeline "1280x1024"x85.0 157.50 1280 1344 1504 1728 1024 1025 1028 1072 +hsync +vsync (91.1 kHz d) [ 8.292] (II) modeset(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz d) [ 8.292] (II) modeset(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz d) [ 8.292] (II) modeset(0): Modeline "1400x900"x60.0 103.50 1400 1480 1624 1848 900 903 913 934 -hsync +vsync (56.0 kHz d) [ 8.292] (II) modeset(0): Modeline "1400x900"x59.9 86.50 1400 1448 1480 1560 900 903 913 926 +hsync -vsync (55.4 kHz d) [ 8.292] (II) modeset(0): Modeline "1280x960"x85.0 148.50 1280 1344 1504 1728 960 961 964 1011 +hsync +vsync (85.9 kHz d) [ 8.292] (II) modeset(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz d) [ 8.292] (II) modeset(0): Modeline "1440x810"x60.0 198.12 1440 1548 1704 1968 810 811 814 839 doublescan -hsync +vsync (100.7 kHz d) [ 8.292] (II) modeset(0): Modeline "1440x810"x60.0 151.88 1440 1464 1480 1520 810 811 814 833 doublescan +hsync -vsync (99.9 kHz d) [ 8.292] (II) modeset(0): Modeline "1368x768"x59.9 85.25 1368 1440 1576 1784 768 771 781 798 -hsync +vsync (47.8 kHz d) [ 8.292] (II) modeset(0): Modeline "1368x768"x59.9 72.25 1368 1416 1448 1528 768 771 781 790 +hsync -vsync (47.3 kHz d) [ 8.292] (II) modeset(0): Modeline "1280x800"x60.0 174.25 1280 1380 1516 1752 800 801 804 829 doublescan -hsync +vsync (99.5 kHz d) [ 8.292] (II) modeset(0): Modeline "1280x800"x60.0 134.25 1280 1304 1320 1360 800 801 804 823 doublescan +hsync -vsync (98.7 kHz d) [ 8.292] (II) modeset(0): Modeline "1280x800"x59.8 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz d) [ 8.292] (II) modeset(0): Modeline "1280x800"x59.9 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz d) [ 8.292] (II) modeset(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz d) [ 8.292] (II) modeset(0): Modeline "1280x720"x60.0 156.12 1280 1376 1512 1744 720 721 724 746 doublescan -hsync +vsync (89.5 kHz d) [ 8.292] (II) modeset(0): Modeline "1280x720"x60.0 120.75 1280 1304 1320 1360 720 721 724 740 doublescan +hsync -vsync (88.8 kHz d) [ 8.292] (II) modeset(0): Modeline "1280x720"x59.9 74.50 1280 1344 1472 1664 720 723 728 748 -hsync +vsync (44.8 kHz d) [ 8.292] (II) modeset(0): Modeline "1280x720"x59.7 63.75 1280 1328 1360 1440 720 723 728 741 +hsync -vsync (44.3 kHz d) [ 8.292] (II) modeset(0): Modeline "1024x768"x85.0 194.02 1024 1108 1220 1416 768 768 770 806 doublescan -hsync +vsync (137.0 kHz d) [ 8.292] (II) modeset(0): Modeline "1024x768"x75.0 170.24 1024 1108 1220 1416 768 768 770 801 doublescan -hsync +vsync (120.2 kHz d) [ 8.292] (II) modeset(0): Modeline "1024x768"x60.0 133.47 1024 1100 1212 1400 768 768 770 794 doublescan -hsync +vsync (95.3 kHz d) [ 8.292] (II) modeset(0): Modeline "1024x768"x85.0 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync (68.7 kHz d) [ 8.292] (II) modeset(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz d) [ 8.292] (II) modeset(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz d) [ 8.292] (II) modeset(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d) [ 8.292] (II) modeset(0): Modeline "1024x768i"x87.0 44.90 1024 1032 1208 1264 768 768 776 817 interlace +hsync +vsync (35.5 kHz d) [ 8.292] (II) modeset(0): Modeline "960x720"x85.0 170.68 960 1036 1144 1328 720 720 722 756 doublescan -hsync +vsync (128.5 kHz d) [ 8.292] (II) modeset(0): Modeline "960x720"x75.0 148.50 960 1032 1144 1320 720 720 722 750 doublescan -hsync +vsync (112.5 kHz d) [ 8.292] (II) modeset(0): Modeline "960x720"x60.0 117.00 960 1024 1128 1300 720 720 722 750 doublescan -hsync +vsync (90.0 kHz d) [ 8.292] (II) modeset(0): Modeline "928x696"x75.0 144.00 928 992 1104 1280 696 696 698 750 doublescan -hsync +vsync (112.5 kHz d) [ 8.292] (II) modeset(0): Modeline "928x696"x60.1 109.15 928 976 1088 1264 696 696 698 719 doublescan -hsync +vsync (86.4 kHz d) [ 8.292] (II) modeset(0): Modeline "896x672"x75.0 130.50 896 944 1052 1228 672 672 674 708 doublescan -hsync +vsync (106.3 kHz d) [ 8.292] (II) modeset(0): Modeline "896x672"x60.0 102.40 896 960 1060 1224 672 672 674 697 doublescan -hsync +vsync (83.7 kHz d) [ 8.292] (II) modeset(0): Modeline "1024x576"x60.0 98.50 1024 1092 1200 1376 576 577 580 597 doublescan -hsync +vsync (71.6 kHz d) [ 8.292] (II) modeset(0): Modeline "1024x576"x60.0 78.38 1024 1048 1064 1104 576 577 580 592 doublescan +hsync -vsync (71.0 kHz d) [ 8.292] (II) modeset(0): Modeline "1024x576"x59.9 46.50 1024 1064 1160 1296 576 579 584 599 -hsync +vsync (35.9 kHz d) [ 8.292] (II) modeset(0): Modeline "1024x576"x59.8 42.00 1024 1072 1104 1184 576 579 584 593 +hsync -vsync (35.5 kHz d) [ 8.292] (II) modeset(0): Modeline "960x600"x59.9 96.62 960 1028 1128 1296 600 601 604 622 doublescan -hsync +vsync (74.6 kHz d) [ 8.292] (II) modeset(0): Modeline "960x600"x60.0 77.00 960 984 1000 1040 600 601 604 617 doublescan +hsync -vsync (74.0 kHz d) [ 8.292] (II) modeset(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz d) [ 8.292] (II) modeset(0): Modeline "960x540"x60.0 86.50 960 1024 1124 1288 540 541 544 560 doublescan -hsync +vsync (67.2 kHz d) [ 8.292] (II) modeset(0): Modeline "960x540"x60.0 69.25 960 984 1000 1040 540 541 544 555 doublescan +hsync -vsync (66.6 kHz d) [ 8.292] (II) modeset(0): Modeline "960x540"x59.6 40.75 960 992 1088 1216 540 543 548 562 -hsync +vsync (33.5 kHz d) [ 8.292] (II) modeset(0): Modeline "960x540"x59.8 37.25 960 1008 1040 1120 540 543 548 556 +hsync -vsync (33.3 kHz d) [ 8.292] (II) modeset(0): Modeline "800x600"x85.0 114.75 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (106.2 kHz d) [ 8.292] (II) modeset(0): Modeline "800x600"x75.0 101.25 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (93.8 kHz d) [ 8.292] (II) modeset(0): Modeline "800x600"x70.0 94.50 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (87.5 kHz d) [ 8.292] (II) modeset(0): Modeline "800x600"x65.0 87.75 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (81.2 kHz d) [ 8.292] (II) modeset(0): Modeline "800x600"x60.0 81.00 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (75.0 kHz d) [ 8.292] (II) modeset(0): Modeline "800x600"x85.1 56.30 800 832 896 1048 600 601 604 631 +hsync +vsync (53.7 kHz d) [ 8.292] (II) modeset(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz d) [ 8.292] (II) modeset(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz d) [ 8.292] (II) modeset(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d) [ 8.292] (II) modeset(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d) [ 8.292] (II) modeset(0): Modeline "840x525"x60.0 73.12 840 892 980 1120 525 526 529 544 doublescan -hsync +vsync (65.3 kHz d) [ 8.292] (II) modeset(0): Modeline "840x525"x59.9 59.50 840 864 880 920 525 526 529 540 doublescan +hsync -vsync (64.7 kHz d) [ 8.292] (II) modeset(0): Modeline "864x486"x59.9 32.50 864 888 968 1072 486 489 494 506 -hsync +vsync (30.3 kHz d) [ 8.292] (II) modeset(0): Modeline "864x486"x59.6 30.50 864 912 944 1024 486 489 494 500 +hsync -vsync (29.8 kHz d) [ 8.292] (II) modeset(0): Modeline "700x525"x74.8 77.90 700 732 892 956 525 526 532 545 doublescan +hsync +vsync (81.5 kHz d) [ 8.292] (II) modeset(0): Modeline "700x525"x60.0 61.00 700 744 820 940 525 526 532 541 doublescan +hsync +vsync (64.9 kHz d) [ 8.292] (II) modeset(0): Modeline "800x450"x59.9 59.12 800 848 928 1056 450 451 454 467 doublescan -hsync +vsync (56.0 kHz d) [ 8.292] (II) modeset(0): Modeline "800x450"x59.8 48.75 800 824 840 880 450 451 454 463 doublescan +hsync -vsync (55.4 kHz d) [ 8.292] (II) modeset(0): Modeline "640x512"x85.0 78.75 640 672 752 864 512 512 514 536 doublescan +hsync +vsync (91.1 kHz d) [ 8.292] (II) modeset(0): Modeline "640x512"x75.0 67.50 640 648 720 844 512 512 514 533 doublescan +hsync +vsync (80.0 kHz d) [ 8.292] (II) modeset(0): Modeline "640x512"x60.0 54.00 640 664 720 844 512 512 514 533 doublescan +hsync +vsync (64.0 kHz d) [ 8.292] (II) modeset(0): Modeline "700x450"x60.0 51.75 700 740 812 924 450 451 456 467 doublescan -hsync +vsync (56.0 kHz d) [ 8.292] (II) modeset(0): Modeline "700x450"x59.9 43.25 700 724 740 780 450 451 456 463 doublescan +hsync -vsync (55.4 kHz d) [ 8.292] (II) modeset(0): Modeline "640x480"x85.1 74.25 640 672 752 864 480 480 482 505 doublescan +hsync +vsync (85.9 kHz d) [ 8.292] (II) modeset(0): Modeline "640x480"x60.0 54.00 640 688 744 900 480 480 482 500 doublescan +hsync +vsync (60.0 kHz d) [ 8.292] (II) modeset(0): Modeline "640x480"x85.0 36.00 640 696 752 832 480 481 484 509 -hsync -vsync (43.3 kHz d) [ 8.292] (II) modeset(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz d) [ 8.292] (II) modeset(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz d) [ 8.292] (II) modeset(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d) [ 8.292] (II) modeset(0): Modeline "720x405"x59.5 22.50 720 744 808 896 405 408 413 422 -hsync +vsync (25.1 kHz d) [ 8.292] (II) modeset(0): Modeline "720x405"x59.0 21.75 720 768 800 880 405 408 413 419 +hsync -vsync (24.7 kHz d) [ 8.292] (II) modeset(0): Modeline "720x400"x85.0 35.50 720 756 828 936 400 401 404 446 -hsync +vsync (37.9 kHz d) [ 8.292] (II) modeset(0): Modeline "684x384"x59.9 42.62 684 720 788 892 384 385 390 399 doublescan -hsync +vsync (47.8 kHz d) [ 8.292] (II) modeset(0): Modeline "684x384"x59.9 36.12 684 708 724 764 384 385 390 395 doublescan +hsync -vsync (47.3 kHz d) [ 8.292] (II) modeset(0): Modeline "640x400"x59.9 41.75 640 676 740 840 400 401 404 415 doublescan -hsync +vsync (49.7 kHz d) [ 8.292] (II) modeset(0): Modeline "640x400"x60.0 35.50 640 664 680 720 400 401 404 411 doublescan +hsync -vsync (49.3 kHz d) [ 8.292] (II) modeset(0): Modeline "640x400"x85.1 31.50 640 672 736 832 400 401 404 445 -hsync +vsync (37.9 kHz d) [ 8.292] (II) modeset(0): Modeline "576x432"x75.0 54.00 576 608 672 800 432 432 434 450 doublescan +hsync +vsync (67.5 kHz d) [ 8.292] (II) modeset(0): Modeline "640x360"x59.9 37.25 640 672 736 832 360 361 364 374 doublescan -hsync +vsync (44.8 kHz d) [ 8.292] (II) modeset(0): Modeline "640x360"x59.8 31.88 640 664 680 720 360 361 364 370 doublescan +hsync -vsync (44.3 kHz d) [ 8.292] (II) modeset(0): Modeline "640x360"x59.8 18.00 640 664 720 800 360 363 368 376 -hsync +vsync (22.5 kHz d) [ 8.292] (II) modeset(0): Modeline "640x360"x59.3 17.75 640 688 720 800 360 363 368 374 +hsync -vsync (22.2 kHz d) [ 8.292] (II) modeset(0): Modeline "640x350"x85.1 31.50 640 672 736 832 350 382 385 445 +hsync -vsync (37.9 kHz d) [ 8.292] (II) modeset(0): Modeline "512x384"x85.0 47.25 512 536 584 688 384 384 386 404 doublescan +hsync +vsync (68.7 kHz d) [ 8.292] (II) modeset(0): Modeline "512x384"x75.0 39.38 512 520 568 656 384 384 386 400 doublescan +hsync +vsync (60.0 kHz d) [ 8.292] (II) modeset(0): Modeline "512x384"x70.1 37.50 512 524 592 664 384 385 388 403 doublescan -hsync -vsync (56.5 kHz d) [ 8.292] (II) modeset(0): Modeline "512x384"x60.0 32.50 512 524 592 672 384 385 388 403 doublescan -hsync -vsync (48.4 kHz d) [ 8.292] (II) modeset(0): Modeline "512x384i"x87.1 22.45 512 516 604 632 384 384 388 408 interlace doublescan +hsync +vsync (35.5 kHz d) [ 8.292] (II) modeset(0): Modeline "512x288"x60.0 23.25 512 532 580 648 288 289 292 299 doublescan -hsync +vsync (35.9 kHz d) [ 8.292] (II) modeset(0): Modeline "512x288"x59.9 21.00 512 536 552 592 288 289 292 296 doublescan +hsync -vsync (35.5 kHz d) [ 8.292] (II) modeset(0): Modeline "416x312"x74.7 28.64 416 432 464 576 312 312 314 333 doublescan -hsync -vsync (49.7 kHz d) [ 8.292] (II) modeset(0): Modeline "480x270"x59.6 20.38 480 496 544 608 270 271 274 281 doublescan -hsync +vsync (33.5 kHz d) [ 8.292] (II) modeset(0): Modeline "480x270"x59.8 18.62 480 504 520 560 270 271 274 278 doublescan +hsync -vsync (33.3 kHz d) [ 8.292] (II) modeset(0): Modeline "400x300"x85.3 28.15 400 416 448 524 300 300 302 315 doublescan +hsync +vsync (53.7 kHz d) [ 8.292] (II) modeset(0): Modeline "400x300"x72.2 25.00 400 428 488 520 300 318 321 333 doublescan +hsync +vsync (48.1 kHz d) [ 8.292] (II) modeset(0): Modeline "400x300"x75.1 24.75 400 408 448 528 300 300 302 312 doublescan +hsync +vsync (46.9 kHz d) [ 8.292] (II) modeset(0): Modeline "400x300"x60.3 20.00 400 420 484 528 300 300 302 314 doublescan +hsync +vsync (37.9 kHz d) [ 8.292] (II) modeset(0): Modeline "400x300"x56.3 18.00 400 412 448 512 300 300 301 312 doublescan +hsync +vsync (35.2 kHz d) [ 8.292] (II) modeset(0): Modeline "432x243"x59.9 16.25 432 444 484 536 243 244 247 253 doublescan -hsync +vsync (30.3 kHz d) [ 8.292] (II) modeset(0): Modeline "432x243"x59.6 15.25 432 456 472 512 243 244 247 250 doublescan +hsync -vsync (29.8 kHz d) [ 8.292] (II) modeset(0): Modeline "320x240"x85.2 18.00 320 348 376 416 240 240 242 254 doublescan -hsync -vsync (43.3 kHz d) [ 8.292] (II) modeset(0): Modeline "320x240"x72.8 15.75 320 332 352 416 240 244 246 260 doublescan -hsync -vsync (37.9 kHz d) [ 8.292] (II) modeset(0): Modeline "320x240"x75.0 15.75 320 328 360 420 240 240 242 250 doublescan -hsync -vsync (37.5 kHz d) [ 8.292] (II) modeset(0): Modeline "320x240"x60.1 12.59 320 328 376 400 240 245 246 262 doublescan -hsync -vsync (31.5 kHz d) [ 8.292] (II) modeset(0): Modeline "360x202"x59.5 11.25 360 372 404 448 202 204 206 211 doublescan -hsync +vsync (25.1 kHz d) [ 8.292] (II) modeset(0): Modeline "360x202"x59.1 10.88 360 384 400 440 202 204 206 209 doublescan +hsync -vsync (24.7 kHz d) [ 8.292] (II) modeset(0): Modeline "360x200"x85.0 17.75 360 378 414 468 200 200 202 223 doublescan -hsync +vsync (37.9 kHz d) [ 8.292] (II) modeset(0): Modeline "320x200"x85.3 15.75 320 336 368 416 200 200 202 222 doublescan -hsync +vsync (37.9 kHz d) [ 8.292] (II) modeset(0): Modeline "320x180"x59.8 9.00 320 332 360 400 180 181 184 188 doublescan -hsync +vsync (22.5 kHz d) [ 8.292] (II) modeset(0): Modeline "320x180"x59.3 8.88 320 344 360 400 180 181 184 187 doublescan +hsync -vsync (22.2 kHz d) [ 8.292] (II) modeset(0): Modeline "320x175"x85.3 15.75 320 336 368 416 175 191 192 222 doublescan +hsync -vsync (37.9 kHz d) [ 8.345] (II) modeset(0): EDID for output DP-1 [ 8.345] (II) modeset(0): Manufacturer: DEL Model: a0be Serial#: ... [ 8.345] (II) modeset(0): Year: 2016 Week: 10 [ 8.345] (II) modeset(0): EDID Version: 1.4 [ 8.345] (II) modeset(0): Digital Display Input [ 8.345] (II) modeset(0): 8 bits per channel [ 8.345] (II) modeset(0): Digital interface is DisplayPort [ 8.345] (II) modeset(0): Max Image Size [cm]: horiz.: 53 vert.: 30 [ 8.345] (II) modeset(0): Gamma: 2.20 [ 8.345] (II) modeset(0): DPMS capabilities: Off [ 8.345] (II) modeset(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 YCrCb 4:2:2 [ 8.345] (II) modeset(0): First detailed timing is preferred mode [ 8.345] (II) modeset(0): Preferred mode is native pixel format and refresh rate [ 8.345] (II) modeset(0): redX: 0.659 redY: 0.334 greenX: 0.301 greenY: 0.639 [ 8.345] (II) modeset(0): blueX: 0.149 blueY: 0.043 whiteX: 0.313 whiteY: 0.329 [ 8.345] (II) modeset(0): Supported established timings: [ 8.345] (II) modeset(0): 720x400@70Hz [ 8.345] (II) modeset(0): 640x480@60Hz [ 8.345] (II) modeset(0): 640x480@75Hz [ 8.345] (II) modeset(0): 800x600@60Hz [ 8.345] (II) modeset(0): 800x600@75Hz [ 8.345] (II) modeset(0): 1024x768@60Hz [ 8.345] (II) modeset(0): 1024x768@75Hz [ 8.345] (II) modeset(0): 1280x1024@75Hz [ 8.345] (II) modeset(0): Manufacturer's mask: 0 [ 8.345] (II) modeset(0): Supported standard timings: [ 8.345] (II) modeset(0): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337 [ 8.345] (II) modeset(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897 [ 8.345] (II) modeset(0): #2: hsize: 1600 vsize 900 refresh: 60 vid: 49321 [ 8.345] (II) modeset(0): #3: hsize: 1600 vsize 1200 refresh: 60 vid: 16553 [ 8.345] (II) modeset(0): #4: hsize: 1920 vsize 1080 refresh: 60 vid: 49361 [ 8.345] (II) modeset(0): #5: hsize: 2048 vsize 1280 refresh: 60 vid: 225 [ 8.345] (II) modeset(0): #6: hsize: 1920 vsize 1200 refresh: 60 vid: 209 [ 8.345] (II) modeset(0): Supported detailed timing: [ 8.345] (II) modeset(0): clock: 533.2 MHz Image Size: 527 x 296 mm [ 8.345] (II) modeset(0): h_active: 3840 h_sync: 3902 h_sync_end 3950 h_blank_end 4000 h_border: 0 [ 8.345] (II) modeset(0): v_active: 2160 v_sync: 2163 v_sync_end 2168 v_blanking: 2222 v_border: 0 [ 8.345] (II) modeset(0): Serial No: 59JJ463417FL [ 8.345] (II) modeset(0): Monitor name: DELL P2415Q [ 8.345] (II) modeset(0): Ranges: V min: 29 V max: 76 Hz, H min: 30 H max: 140 kHz, PixClock max 545 MHz [ 8.345] (II) modeset(0): Supported detailed timing: [ 8.345] (II) modeset(0): clock: 241.5 MHz Image Size: 527 x 296 mm [ 8.345] (II) modeset(0): h_active: 2560 h_sync: 2608 h_sync_end 2640 h_blank_end 2720 h_border: 0 [ 8.345] (II) modeset(0): v_active: 1440 v_sync: 1443 v_sync_end 1448 v_blanking: 1481 v_border: 0 [ 8.345] (II) modeset(0): Supported detailed timing: [ 8.345] (II) modeset(0): clock: 148.5 MHz Image Size: 527 x 296 mm [ 8.345] (II) modeset(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0 [ 8.345] (II) modeset(0): v_active: 1080 v_sync: 1082 v_sync_end 1087 v_blanking: 1125 v_border: 0 [ 8.345] (II) modeset(0): Supported detailed timing: [ 8.345] (II) modeset(0): clock: 74.2 MHz Image Size: 527 x 296 mm [ 8.345] (II) modeset(0): h_active: 1280 h_sync: 1390 h_sync_end 1430 h_blank_end 1650 h_border: 0 [ 8.345] (II) modeset(0): v_active: 720 v_sync: 725 v_sync_end 730 v_blanking: 750 v_border: 0 [ 8.345] (II) modeset(0): Supported detailed timing: [ 8.345] (II) modeset(0): clock: 262.8 MHz Image Size: 527 x 296 mm [ 8.345] (II) modeset(0): h_active: 3840 h_sync: 3888 h_sync_end 3920 h_blank_end 4000 h_border: 0 [ 8.346] (II) modeset(0): v_active: 2160 v_sync: 2163 v_sync_end 2168 v_blanking: 2191 v_border: 0 [ 8.346] (II) modeset(0): Number of EDID sections to follow: 1 [ 8.346] (II) modeset(0): EDID (in hex): [ 8.346] (II) modeset(0): 00ffffffffffff0010acbea04c463731 [ 8.346] (II) modeset(0): 0a1a0104a5351e783ae245a8554da326 [ 8.346] (II) modeset(0): 0b5054a54b00714f8180a9c0a940d1c0 [ 8.346] (II) modeset(0): e100d10001014dd000a0f0703e803e30 [ 8.346] (II) modeset(0): 35000f282100001a000000ff0035394a [ 8.346] (II) modeset(0): 4a343633343137464c0a000000fc0044 [ 8.346] (II) modeset(0): 454c4c205032343135510a20000000fd [ 8.346] (II) modeset(0): 001d4c1e8c36000a2020202020200143 [ 8.346] (II) modeset(0): 02031df150101f200514041312110302 [ 8.346] (II) modeset(0): 161507060123091f0783010000565e00 [ 8.346] (II) modeset(0): a0a0a02950302035000f282100001a02 [ 8.346] (II) modeset(0): 3a801871382d40582c25000f28210000 [ 8.346] (II) modeset(0): 1e011d007251d01e206e2855000f2821 [ 8.346] (II) modeset(0): 00001ea36600a0f0701f80302035000f [ 8.346] (II) modeset(0): 282100001a0000000000000000000000 [ 8.346] (II) modeset(0): 000000000000000000000000000000eb [ 8.346] (II) modeset(0): Printing probed modes for output DP-1 [ 8.346] (II) modeset(0): Modeline "3840x2160"x60.0 533.25 3840 3902 3950 4000 2160 2163 2168 2222 +hsync -vsync (133.3 kHz eP) [ 8.346] (II) modeset(0): Modeline "3840x2160"x30.0 262.75 3840 3888 3920 4000 2160 2163 2168 2191 +hsync -vsync (65.7 kHz e) [ 8.346] (II) modeset(0): Modeline "2560x1440"x60.0 241.50 2560 2608 2640 2720 1440 1443 1448 1481 +hsync -vsync (88.8 kHz e) [ 8.346] (II) modeset(0): Modeline "2048x1280"x60.0 221.28 2048 2192 2416 2784 1280 1281 1284 1325 -hsync +vsync (79.5 kHz) [ 8.346] (II) modeset(0): Modeline "1920x1200"x59.9 193.25 1920 2056 2256 2592 1200 1203 1209 1245 -hsync +vsync (74.6 kHz e) [ 8.346] (II) modeset(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1082 1087 1125 +hsync +vsync (67.5 kHz e) [ 8.346] (II) modeset(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz e) [ 8.346] (II) modeset(0): Modeline "1920x1080"x50.0 148.50 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (56.2 kHz e) [ 8.346] (II) modeset(0): Modeline "1920x1080"x59.9 148.35 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.4 kHz e) [ 8.346] (II) modeset(0): Modeline "1920x1080"x24.0 74.25 1920 2558 2602 2750 1080 1084 1089 1125 +hsync +vsync (27.0 kHz e) [ 8.346] (II) modeset(0): Modeline "1920x1080"x24.0 74.18 1920 2558 2602 2750 1080 1084 1089 1125 +hsync +vsync (27.0 kHz e) [ 8.346] (II) modeset(0): Modeline "1600x1200"x60.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e) [ 8.346] (II) modeset(0): Modeline "1600x900"x60.0 108.00 1600 1624 1704 1800 900 901 904 1000 +hsync +vsync (60.0 kHz e) [ 8.346] (II) modeset(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e) [ 8.346] (II) modeset(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e) [ 8.346] (II) modeset(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e) [ 8.346] (II) modeset(0): Modeline "1280x720"x60.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e) [ 8.346] (II) modeset(0): Modeline "1280x720"x50.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz e) [ 8.346] (II) modeset(0): Modeline "1280x720"x59.9 74.18 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e) [ 8.346] (II) modeset(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e) [ 8.346] (II) modeset(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 8.346] (II) modeset(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e) [ 8.346] (II) modeset(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 8.346] (II) modeset(0): Modeline "720x576"x50.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz e) [ 8.346] (II) modeset(0): Modeline "720x480"x60.0 27.03 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e) [ 8.346] (II) modeset(0): Modeline "720x480"x59.9 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e) [ 8.346] (II) modeset(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e) [ 8.346] (II) modeset(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 8.346] (II) modeset(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 8.346] (II) modeset(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e) [ 8.346] (II) modeset(0): EDID for output DP-2 [ 8.346] (II) modeset(0): Output eDP-1 connected [ 8.346] (II) modeset(0): Output DP-1 connected [ 8.346] (II) modeset(0): Output DP-2 disconnected [ 8.346] (II) modeset(0): Using spanning desktop for initial modes [ 8.346] (II) modeset(0): Output eDP-1 using initial mode 2560x1600 +0+0 [ 8.346] (II) modeset(0): Output DP-1 using initial mode 3840x2160 +2560+0 [ 8.346] (==) modeset(0): Using gamma correction (1.0, 1.0, 1.0) [ 8.346] (==) modeset(0): DPI set to (96, 96) [ 8.346] (II) Loading sub module "fb" [ 8.346] (II) LoadModule: "fb" [ 8.346] (II) Module "fb" already built-in [ 8.346] (==) NVIDIA(G0): Depth 24, (==) framebuffer bpp 32 [ 8.346] (==) NVIDIA(G0): RGB weight 888 [ 8.346] (==) NVIDIA(G0): Default visual is TrueColor [ 8.346] (==) NVIDIA(G0): Using gamma correction (1.0, 1.0, 1.0) [ 8.346] (II) Applying OutputClass "nvidia" options to /dev/dri/card0 [ 8.346] (**) NVIDIA(G0): Option "AllowEmptyInitialConfiguration" [ 8.346] (**) NVIDIA(G0): Enabling 2D acceleration [ 8.346] (II) Loading sub module "glxserver_nvidia" [ 8.346] (II) LoadModule: "glxserver_nvidia" [ 8.346] (II) Loading /usr/lib/nvidia/xorg/libglxserver_nvidia.so [ 8.372] (II) Module glxserver_nvidia: vendor="NVIDIA Corporation" [ 8.372] compiled for 1.6.99.901, module version = 1.0.0 [ 8.372] Module class: X.Org Server Extension [ 8.372] (II) NVIDIA GLX Module 570.144 Thu Apr 10 20:06:53 UTC 2025 [ 8.372] (II) NVIDIA: The X server supports PRIME Render Offload. [ 8.375] (--) NVIDIA(0): Valid display device(s) on GPU-0 at PCI:1:0:0 [ 8.375] (--) NVIDIA(0): DFP-0 [ 8.375] (--) NVIDIA(0): DFP-1 [ 8.375] (--) NVIDIA(0): DFP-2 [ 8.375] (--) NVIDIA(0): DFP-3 [ 8.375] (--) NVIDIA(0): DFP-4 [ 8.375] (--) NVIDIA(0): DFP-5 [ 8.382] (II) NVIDIA(G0): NVIDIA GPU NVIDIA GeForce RTX 3050 Ti Laptop GPU (GA107-B) at [ 8.382] (II) NVIDIA(G0): PCI:1:0:0 (GPU-0) [ 8.382] (--) NVIDIA(G0): Memory: 4194304 kBytes [ 8.382] (--) NVIDIA(G0): VideoBIOS: 94.07.57.00.54 [ 8.382] (II) NVIDIA(G0): Detected PCI Express Link width: 16X [ 8.382] (--) NVIDIA(GPU-0): DFP-0: disconnected [ 8.382] (--) NVIDIA(GPU-0): DFP-0: Internal DisplayPort [ 8.382] (--) NVIDIA(GPU-0): DFP-0: 2670.0 MHz maximum pixel clock [ 8.382] (--) NVIDIA(GPU-0): [ 8.382] (--) NVIDIA(GPU-0): DFP-1: disconnected [ 8.382] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS [ 8.382] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock [ 8.382] (--) NVIDIA(GPU-0): [ 8.382] (--) NVIDIA(GPU-0): DFP-2: disconnected [ 8.382] (--) NVIDIA(GPU-0): DFP-2: Internal DisplayPort [ 8.382] (--) NVIDIA(GPU-0): DFP-2: 2670.0 MHz maximum pixel clock [ 8.382] (--) NVIDIA(GPU-0): [ 8.382] (--) NVIDIA(GPU-0): DFP-3: disconnected [ 8.382] (--) NVIDIA(GPU-0): DFP-3: Internal TMDS [ 8.382] (--) NVIDIA(GPU-0): DFP-3: 165.0 MHz maximum pixel clock [ 8.382] (--) NVIDIA(GPU-0): [ 8.383] (--) NVIDIA(GPU-0): DFP-4: disconnected [ 8.383] (--) NVIDIA(GPU-0): DFP-4: Internal TMDS [ 8.383] (--) NVIDIA(GPU-0): DFP-4: 165.0 MHz maximum pixel clock [ 8.383] (--) NVIDIA(GPU-0): [ 8.383] (--) NVIDIA(GPU-0): DFP-5: disconnected [ 8.383] (--) NVIDIA(GPU-0): DFP-5: Internal DisplayPort [ 8.383] (--) NVIDIA(GPU-0): DFP-5: 2670.0 MHz maximum pixel clock [ 8.383] (--) NVIDIA(GPU-0): [ 8.387] (II) NVIDIA(G0): Validated MetaModes: [ 8.387] (II) NVIDIA(G0): "NULL" [ 8.387] (II) NVIDIA(G0): Virtual screen size determined to be 640 x 480 [ 8.387] (WW) NVIDIA(G0): Unable to get display device for DPI computation. [ 8.387] (==) NVIDIA(G0): DPI set to (75, 75); computed from built-in default [ 8.387] (II) UnloadModule: "nouveau" [ 8.388] (II) Unloading nouveau [ 8.407] (==) modeset(0): Backing store enabled [ 8.407] (==) modeset(0): Silken mouse enabled [ 8.546] (II) modeset(0): Initializing kms color map for depth 24, 8 bpc. [ 8.546] (==) modeset(0): DPMS enabled [ 8.546] (II) modeset(0): [DRI2] Setup complete [ 8.546] (II) modeset(0): [DRI2] DRI driver: iris [ 8.546] (II) modeset(0): [DRI2] VDPAU driver: va_gl [ 8.548] (II) NVIDIA: Reserving 24576.00 MB of virtual memory for indirect memory [ 8.548] (II) NVIDIA: access. [ 8.556] (WW) NVIDIA(G0): ACPI: failed to determine the system's current power source [ 8.556] (II) NVIDIA(G0): ACPI: failed to connect to the ACPI event daemon; the daemon [ 8.556] (II) NVIDIA(G0): may not be running or the "AcpidSocketPath" X [ 8.556] (II) NVIDIA(G0): configuration option may not be set correctly. When the [ 8.556] (II) NVIDIA(G0): ACPI event daemon is available, the NVIDIA X driver will [ 8.556] (II) NVIDIA(G0): try to use it to receive ACPI event notifications. For [ 8.556] (II) NVIDIA(G0): details, please see the "ConnectToAcpid" and [ 8.556] (II) NVIDIA(G0): "AcpidSocketPath" X configuration options in Appendix B: X [ 8.556] (II) NVIDIA(G0): Config Options in the README. [ 8.567] (II) NVIDIA(G0): Setting mode "NULL" [ 8.590] (==) NVIDIA(G0): Disabling shared memory pixmaps [ 8.590] (==) NVIDIA(G0): Backing store enabled [ 8.590] (==) NVIDIA(G0): Silken mouse enabled [ 8.590] (==) NVIDIA(G0): DPMS enabled [ 8.590] (II) Loading sub module "dri2" [ 8.590] (II) LoadModule: "dri2" [ 8.590] (II) Module "dri2" already built-in [ 8.590] (II) NVIDIA(G0): [DRI2] Setup complete [ 8.590] (II) NVIDIA(G0): [DRI2] VDPAU driver: nvidia [ 8.590] (II) Initializing extension Generic Event Extension [ 8.590] (II) Initializing extension SHAPE [ 8.590] (II) Initializing extension MIT-SHM [ 8.590] (II) Initializing extension XInputExtension [ 8.591] (II) Initializing extension XTEST [ 8.591] (II) Initializing extension BIG-REQUESTS [ 8.591] (II) Initializing extension SYNC [ 8.591] (II) Initializing extension XKEYBOARD [ 8.591] (II) Initializing extension XC-MISC [ 8.591] (II) Initializing extension SECURITY [ 8.591] (II) Initializing extension XFIXES [ 8.591] (II) Initializing extension RENDER [ 8.591] (II) Initializing extension RANDR [ 8.591] (II) Initializing extension COMPOSITE [ 8.591] (II) Initializing extension DAMAGE [ 8.591] (II) Initializing extension MIT-SCREEN-SAVER [ 8.591] (II) Initializing extension DOUBLE-BUFFER [ 8.591] (II) Initializing extension RECORD [ 8.591] (II) Initializing extension DPMS [ 8.591] (II) Initializing extension Present [ 8.591] (II) Initializing extension DRI3 [ 8.591] (II) Initializing extension X-Resource [ 8.591] (II) Initializing extension XVideo [ 8.591] (II) Initializing extension XVideo-MotionCompensation [ 8.591] (II) Initializing extension GLX [ 8.591] (II) Initializing extension GLX [ 8.592] (II) Indirect GLX disabled. [ 8.611] (II) AIGLX: Loaded and initialized iris [ 8.611] (II) GLX: Initialized DRI2 GL provider for screen 0 [ 8.611] (II) Initializing extension XFree86-VidModeExtension [ 8.611] (II) Initializing extension XFree86-DGA [ 8.611] (II) Initializing extension XFree86-DRI [ 8.611] (II) Initializing extension DRI2 [ 8.611] (II) Initializing extension NV-GLX [ 8.611] (II) Initializing extension NV-CONTROL [ 8.611] (II) modeset(0): Damage tracking initialized [ 8.611] (II) modeset(0): Setting screen physical size to 1693 x 571 [ 8.645] (II) config/udev: Adding input device Power Button (/dev/input/event2) [ 8.645] (**) Power Button: Applying InputClass "libinput keyboard catchall" [ 8.645] (**) Power Button: Applying InputClass "system-keyboard" [ 8.645] (II) LoadModule: "libinput" [ 8.645] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so [ 8.647] (II) Module libinput: vendor="X.Org Foundation" [ 8.647] compiled for 1.21.1.13, module version = 1.5.0 [ 8.647] Module class: X.Org XInput Driver [ 8.647] ABI class: X.Org XInput driver, version 24.4 [ 8.647] (II) Using input driver 'libinput' for 'Power Button' [ 8.647] (**) Power Button: always reports core events [ 8.647] (**) Option "Device" "/dev/input/event2" [ 8.650] (II) event2 - Power Button: is tagged by udev as: Keyboard [ 8.650] (II) event2 - Power Button: device is a keyboard [ 8.650] (II) event2 - Power Button: device removed [ 8.661] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2" [ 8.661] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6) [ 8.661] (**) Option "xkb_model" "pc105+inet" [ 8.661] (**) Option "xkb_layout" "us" [ 8.661] (**) Option "xkb_options" "terminate:ctrl_alt_bksp" [ 8.674] (II) event2 - Power Button: is tagged by udev as: Keyboard [ 8.674] (II) event2 - Power Button: device is a keyboard [ 8.674] (II) config/udev: Adding input device Video Bus (/dev/input/event5) [ 8.674] (**) Video Bus: Applying InputClass "libinput keyboard catchall" [ 8.674] (**) Video Bus: Applying InputClass "system-keyboard" [ 8.674] (II) Using input driver 'libinput' for 'Video Bus' [ 8.674] (**) Video Bus: always reports core events [ 8.674] (**) Option "Device" "/dev/input/event5" [ 8.675] (II) event5 - Video Bus: is tagged by udev as: Keyboard [ 8.675] (II) event5 - Video Bus: device is a keyboard [ 8.675] (II) event5 - Video Bus: device removed [ 8.712] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input5/event5" [ 8.712] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7) [ 8.712] (**) Option "xkb_model" "pc105+inet" [ 8.712] (**) Option "xkb_layout" "us" [ 8.712] (**) Option "xkb_options" "terminate:ctrl_alt_bksp" [ 8.714] (II) event5 - Video Bus: is tagged by udev as: Keyboard [ 8.714] (II) event5 - Video Bus: device is a keyboard [ 8.715] (II) config/udev: Adding input device Video Bus (/dev/input/event4) [ 8.715] (**) Video Bus: Applying InputClass "libinput keyboard catchall" [ 8.715] (**) Video Bus: Applying InputClass "system-keyboard" [ 8.715] (II) Using input driver 'libinput' for 'Video Bus' [ 8.715] (**) Video Bus: always reports core events [ 8.715] (**) Option "Device" "/dev/input/event4" [ 8.716] (II) event4 - Video Bus: is tagged by udev as: Keyboard [ 8.716] (II) event4 - Video Bus: device is a keyboard [ 8.716] (II) event4 - Video Bus: device removed [ 8.743] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:03/LNXVIDEO:00/input/input4/event4" [ 8.743] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8) [ 8.743] (**) Option "xkb_model" "pc105+inet" [ 8.743] (**) Option "xkb_layout" "us" [ 8.743] (**) Option "xkb_options" "terminate:ctrl_alt_bksp" [ 8.745] (II) event4 - Video Bus: is tagged by udev as: Keyboard [ 8.745] (II) event4 - Video Bus: device is a keyboard [ 8.746] (II) config/udev: Adding input device Power Button (/dev/input/event1) [ 8.746] (**) Power Button: Applying InputClass "libinput keyboard catchall" [ 8.746] (**) Power Button: Applying InputClass "system-keyboard" [ 8.746] (II) Using input driver 'libinput' for 'Power Button' [ 8.746] (**) Power Button: always reports core events [ 8.746] (**) Option "Device" "/dev/input/event1" [ 8.746] (II) event1 - Power Button: is tagged by udev as: Keyboard [ 8.747] (II) event1 - Power Button: device is a keyboard [ 8.747] (II) event1 - Power Button: device removed [ 8.770] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1/event1" [ 8.770] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 9) [ 8.770] (**) Option "xkb_model" "pc105+inet" [ 8.770] (**) Option "xkb_layout" "us" [ 8.770] (**) Option "xkb_options" "terminate:ctrl_alt_bksp" [ 8.771] (II) event1 - Power Button: is tagged by udev as: Keyboard [ 8.771] (II) event1 - Power Button: device is a keyboard [ 8.772] (II) config/udev: Adding input device Lid Switch (/dev/input/event0) [ 8.772] (II) No input driver specified, ignoring this device. [ 8.772] (II) This device may have been added with another device file. [ 8.773] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event258) [ 8.773] (II) No input driver specified, ignoring this device. [ 8.773] (II) This device may have been added with another device file. [ 8.774] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event259) [ 8.774] (II) No input driver specified, ignoring this device. [ 8.774] (II) This device may have been added with another device file. [ 8.774] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event260) [ 8.774] (II) No input driver specified, ignoring this device. [ 8.774] (II) This device may have been added with another device file. [ 8.774] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event261) [ 8.774] (II) No input driver specified, ignoring this device. [ 8.774] (II) This device may have been added with another device file. [ 8.776] (II) config/udev: Adding input device USB Sound Device (/dev/input/event6) [ 8.776] (**) USB Sound Device : Applying InputClass "libinput keyboard catchall" [ 8.776] (**) USB Sound Device : Applying InputClass "system-keyboard" [ 8.776] (II) Using input driver 'libinput' for 'USB Sound Device ' [ 8.776] (**) USB Sound Device : always reports core events [ 8.776] (**) Option "Device" "/dev/input/event6" [ 8.777] (II) event6 - USB Sound Device : is tagged by udev as: Keyboard [ 8.777] (II) event6 - USB Sound Device : device is a keyboard [ 8.777] (II) event6 - USB Sound Device : device removed [ 8.804] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1.2/3-1.2:1.3/0003:0D8C:0102.0001/input/input6/event6" [ 8.804] (II) XINPUT: Adding extended input device "USB Sound Device " (type: KEYBOARD, id 10) [ 8.804] (**) Option "xkb_model" "pc105+inet" [ 8.804] (**) Option "xkb_layout" "us" [ 8.804] (**) Option "xkb_options" "terminate:ctrl_alt_bksp" [ 8.806] (II) event6 - USB Sound Device : is tagged by udev as: Keyboard [ 8.806] (II) event6 - USB Sound Device : device is a keyboard [ 8.808] (II) config/udev: Adding input device HOLTEK USB-HID Keyboard (/dev/input/event9) [ 8.808] (**) HOLTEK USB-HID Keyboard: Applying InputClass "libinput keyboard catchall" [ 8.808] (**) HOLTEK USB-HID Keyboard: Applying InputClass "system-keyboard" [ 8.808] (II) Using input driver 'libinput' for 'HOLTEK USB-HID Keyboard' [ 8.808] (**) HOLTEK USB-HID Keyboard: always reports core events [ 8.808] (**) Option "Device" "/dev/input/event9" [ 8.809] (II) event9 - HOLTEK USB-HID Keyboard: is tagged by udev as: Keyboard [ 8.809] (II) event9 - HOLTEK USB-HID Keyboard: device is a keyboard [ 8.810] (II) event9 - HOLTEK USB-HID Keyboard: device removed [ 8.831] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1.3/3-1.3:1.0/0003:04D9:A12A.0003/input/input9/event9" [ 8.831] (II) XINPUT: Adding extended input device "HOLTEK USB-HID Keyboard" (type: KEYBOARD, id 11) [ 8.831] (**) Option "xkb_model" "pc105+inet" [ 8.831] (**) Option "xkb_layout" "us" [ 8.831] (**) Option "xkb_options" "terminate:ctrl_alt_bksp" [ 8.833] (II) event9 - HOLTEK USB-HID Keyboard: is tagged by udev as: Keyboard [ 8.833] (II) event9 - HOLTEK USB-HID Keyboard: device is a keyboard [ 8.834] (II) config/udev: Adding input device HOLTEK USB-HID Keyboard Mouse (/dev/input/event10) [ 8.834] (**) HOLTEK USB-HID Keyboard Mouse: Applying InputClass "libinput pointer catchall" [ 8.834] (II) Using input driver 'libinput' for 'HOLTEK USB-HID Keyboard Mouse' [ 8.834] (**) HOLTEK USB-HID Keyboard Mouse: always reports core events [ 8.834] (**) Option "Device" "/dev/input/event10" [ 8.836] (II) event10 - HOLTEK USB-HID Keyboard Mouse: is tagged by udev as: Mouse [ 8.836] (II) event10 - HOLTEK USB-HID Keyboard Mouse: device is a pointer [ 8.836] (II) event10 - HOLTEK USB-HID Keyboard Mouse: device removed [ 8.868] (II) libinput: HOLTEK USB-HID Keyboard Mouse: Step value 0 was provided, libinput Fallback acceleration function is used. [ 8.868] (II) libinput: HOLTEK USB-HID Keyboard Mouse: Step value 0 was provided, libinput Fallback acceleration function is used. [ 8.868] (II) libinput: HOLTEK USB-HID Keyboard Mouse: Step value 0 was provided, libinput Fallback acceleration function is used. [ 8.868] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1.3/3-1.3:1.2/0003:04D9:A12A.0005/input/input10/event10" [ 8.868] (II) XINPUT: Adding extended input device "HOLTEK USB-HID Keyboard Mouse" (type: MOUSE, id 12) [ 8.868] (**) Option "AccelerationScheme" "none" [ 8.868] (**) HOLTEK USB-HID Keyboard Mouse: (accel) selected scheme none/0 [ 8.868] (**) HOLTEK USB-HID Keyboard Mouse: (accel) acceleration factor: 2.000 [ 8.868] (**) HOLTEK USB-HID Keyboard Mouse: (accel) acceleration threshold: 4 [ 8.870] (II) event10 - HOLTEK USB-HID Keyboard Mouse: is tagged by udev as: Mouse [ 8.871] (II) event10 - HOLTEK USB-HID Keyboard Mouse: device is a pointer [ 8.872] (II) config/udev: Adding input device HOLTEK USB-HID Keyboard Mouse (/dev/input/mouse0) [ 8.872] (II) No input driver specified, ignoring this device. [ 8.872] (II) This device may have been added with another device file. [ 8.873] (II) config/udev: Adding input device HOLTEK USB-HID Keyboard System Control (/dev/input/event11) [ 8.873] (**) HOLTEK USB-HID Keyboard System Control: Applying InputClass "libinput keyboard catchall" [ 8.873] (**) HOLTEK USB-HID Keyboard System Control: Applying InputClass "system-keyboard" [ 8.873] (II) Using input driver 'libinput' for 'HOLTEK USB-HID Keyboard System Control' [ 8.873] (**) HOLTEK USB-HID Keyboard System Control: always reports core events [ 8.873] (**) Option "Device" "/dev/input/event11" [ 8.874] (II) event11 - HOLTEK USB-HID Keyboard System Control: is tagged by udev as: Keyboard [ 8.874] (II) event11 - HOLTEK USB-HID Keyboard System Control: device is a keyboard [ 8.874] (II) event11 - HOLTEK USB-HID Keyboard System Control: device removed [ 8.895] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1.3/3-1.3:1.2/0003:04D9:A12A.0005/input/input11/event11" [ 8.895] (II) XINPUT: Adding extended input device "HOLTEK USB-HID Keyboard System Control" (type: KEYBOARD, id 13) [ 8.895] (**) Option "xkb_model" "pc105+inet" [ 8.895] (**) Option "xkb_layout" "us" [ 8.895] (**) Option "xkb_options" "terminate:ctrl_alt_bksp" [ 8.897] (II) event11 - HOLTEK USB-HID Keyboard System Control: is tagged by udev as: Keyboard [ 8.897] (II) event11 - HOLTEK USB-HID Keyboard System Control: device is a keyboard [ 8.899] (II) config/udev: Adding input device HOLTEK USB-HID Keyboard Consumer Control (/dev/input/event12) [ 8.899] (**) HOLTEK USB-HID Keyboard Consumer Control: Applying InputClass "libinput keyboard catchall" [ 8.899] (**) HOLTEK USB-HID Keyboard Consumer Control: Applying InputClass "system-keyboard" [ 8.899] (II) Using input driver 'libinput' for 'HOLTEK USB-HID Keyboard Consumer Control' [ 8.899] (**) HOLTEK USB-HID Keyboard Consumer Control: always reports core events [ 8.899] (**) Option "Device" "/dev/input/event12" [ 8.900] (II) event12 - HOLTEK USB-HID Keyboard Consumer Control: is tagged by udev as: Keyboard [ 8.900] (II) event12 - HOLTEK USB-HID Keyboard Consumer Control: device is a keyboard [ 8.901] (II) event12 - HOLTEK USB-HID Keyboard Consumer Control: device removed [ 8.922] (II) libinput: HOLTEK USB-HID Keyboard Consumer Control: needs a virtual subdevice [ 8.922] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1.3/3-1.3:1.2/0003:04D9:A12A.0005/input/input12/event12" [ 8.922] (II) XINPUT: Adding extended input device "HOLTEK USB-HID Keyboard Consumer Control" (type: MOUSE, id 14) [ 8.922] (**) Option "AccelerationScheme" "none" [ 8.922] (**) HOLTEK USB-HID Keyboard Consumer Control: (accel) selected scheme none/0 [ 8.922] (**) HOLTEK USB-HID Keyboard Consumer Control: (accel) acceleration factor: 2.000 [ 8.922] (**) HOLTEK USB-HID Keyboard Consumer Control: (accel) acceleration threshold: 4 [ 8.924] (II) event12 - HOLTEK USB-HID Keyboard Consumer Control: is tagged by udev as: Keyboard [ 8.925] (II) event12 - HOLTEK USB-HID Keyboard Consumer Control: device is a keyboard [ 8.926] (II) config/udev: Adding input device HOLTEK USB-HID Keyboard (/dev/input/event13) [ 8.926] (II) No input driver specified, ignoring this device. [ 8.926] (II) This device may have been added with another device file. [ 8.927] (II) config/udev: Adding input device HOLTEK USB-HID Keyboard (/dev/input/event14) [ 8.927] (**) HOLTEK USB-HID Keyboard: Applying InputClass "libinput keyboard catchall" [ 8.927] (**) HOLTEK USB-HID Keyboard: Applying InputClass "system-keyboard" [ 8.927] (II) Using input driver 'libinput' for 'HOLTEK USB-HID Keyboard' [ 8.927] (**) HOLTEK USB-HID Keyboard: always reports core events [ 8.927] (**) Option "Device" "/dev/input/event14" [ 8.928] (II) event14 - HOLTEK USB-HID Keyboard: is tagged by udev as: Keyboard [ 8.928] (II) event14 - HOLTEK USB-HID Keyboard: device is a keyboard [ 8.928] (II) event14 - HOLTEK USB-HID Keyboard: device removed [ 8.949] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1.3/3-1.3:1.2/0003:04D9:A12A.0005/input/input14/event14" [ 8.949] (II) XINPUT: Adding extended input device "HOLTEK USB-HID Keyboard" (type: KEYBOARD, id 15) [ 8.949] (**) Option "xkb_model" "pc105+inet" [ 8.949] (**) Option "xkb_layout" "us" [ 8.949] (**) Option "xkb_options" "terminate:ctrl_alt_bksp" [ 8.951] (II) event14 - HOLTEK USB-HID Keyboard: is tagged by udev as: Keyboard [ 8.951] (II) event14 - HOLTEK USB-HID Keyboard: device is a keyboard [ 8.952] (II) config/udev: Adding input device Logitech Gaming Mouse G502 (/dev/input/event21) [ 8.953] (**) Logitech Gaming Mouse G502: Applying InputClass "libinput pointer catchall" [ 8.953] (II) Using input driver 'libinput' for 'Logitech Gaming Mouse G502' [ 8.953] (**) Logitech Gaming Mouse G502: always reports core events [ 8.953] (**) Option "Device" "/dev/input/event21" [ 9.006] (II) event21 - Logitech Gaming Mouse G502: is tagged by udev as: Mouse [ 9.006] (II) event21 - Logitech Gaming Mouse G502: device set to 2400 DPI [ 9.007] (II) event21 - Logitech Gaming Mouse G502: device is a pointer [ 9.007] (II) event21 - Logitech Gaming Mouse G502: device removed [ 9.035] (II) libinput: Logitech Gaming Mouse G502: Step value 0 was provided, libinput Fallback acceleration function is used. [ 9.035] (II) libinput: Logitech Gaming Mouse G502: Step value 0 was provided, libinput Fallback acceleration function is used. [ 9.035] (II) libinput: Logitech Gaming Mouse G502: Step value 0 was provided, libinput Fallback acceleration function is used. [ 9.035] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1.4/3-1.4:1.0/0003:046D:C332.000B/input/input21/event21" [ 9.035] (II) XINPUT: Adding extended input device "Logitech Gaming Mouse G502" (type: MOUSE, id 16) [ 9.035] (**) Option "AccelerationScheme" "none" [ 9.035] (**) Logitech Gaming Mouse G502: (accel) selected scheme none/0 [ 9.035] (**) Logitech Gaming Mouse G502: (accel) acceleration factor: 2.000 [ 9.035] (**) Logitech Gaming Mouse G502: (accel) acceleration threshold: 4 [ 9.089] (II) event21 - Logitech Gaming Mouse G502: is tagged by udev as: Mouse [ 9.089] (II) event21 - Logitech Gaming Mouse G502: device set to 2400 DPI [ 9.089] (II) event21 - Logitech Gaming Mouse G502: device is a pointer [ 9.091] (II) config/udev: Adding input device Logitech Gaming Mouse G502 (/dev/input/mouse2) [ 9.091] (II) No input driver specified, ignoring this device. [ 9.091] (II) This device may have been added with another device file. [ 9.092] (II) config/udev: Adding input device Logitech Gaming Mouse G502 Keyboard (/dev/input/event22) [ 9.092] (**) Logitech Gaming Mouse G502 Keyboard: Applying InputClass "libinput keyboard catchall" [ 9.092] (**) Logitech Gaming Mouse G502 Keyboard: Applying InputClass "system-keyboard" [ 9.092] (II) Using input driver 'libinput' for 'Logitech Gaming Mouse G502 Keyboard' [ 9.092] (**) Logitech Gaming Mouse G502 Keyboard: always reports core events [ 9.092] (**) Option "Device" "/dev/input/event22" [ 9.092] (II) event22 - Logitech Gaming Mouse G502 Keyboard: is tagged by udev as: Keyboard [ 9.092] (II) event22 - Logitech Gaming Mouse G502 Keyboard: device is a keyboard [ 9.092] (II) event22 - Logitech Gaming Mouse G502 Keyboard: device removed [ 9.114] (II) libinput: Logitech Gaming Mouse G502 Keyboard: needs a virtual subdevice [ 9.114] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1.4/3-1.4:1.1/0003:046D:C332.000C/input/input22/event22" [ 9.114] (II) XINPUT: Adding extended input device "Logitech Gaming Mouse G502 Keyboard" (type: MOUSE, id 17) [ 9.114] (**) Option "AccelerationScheme" "none" [ 9.114] (**) Logitech Gaming Mouse G502 Keyboard: (accel) selected scheme none/0 [ 9.114] (**) Logitech Gaming Mouse G502 Keyboard: (accel) acceleration factor: 2.000 [ 9.114] (**) Logitech Gaming Mouse G502 Keyboard: (accel) acceleration threshold: 4 [ 9.117] (II) event22 - Logitech Gaming Mouse G502 Keyboard: is tagged by udev as: Keyboard [ 9.117] (II) event22 - Logitech Gaming Mouse G502 Keyboard: device is a keyboard [ 9.118] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event15) [ 9.118] (**) Logitech USB Receiver: Applying InputClass "libinput keyboard catchall" [ 9.118] (**) Logitech USB Receiver: Applying InputClass "system-keyboard" [ 9.118] (II) Using input driver 'libinput' for 'Logitech USB Receiver' [ 9.118] (**) Logitech USB Receiver: always reports core events [ 9.118] (**) Option "Device" "/dev/input/event15" [ 9.120] (II) event15 - Logitech USB Receiver: is tagged by udev as: Keyboard [ 9.120] (II) event15 - Logitech USB Receiver: device is a keyboard [ 9.120] (II) event15 - Logitech USB Receiver: device removed [ 9.141] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2.1/3-2.1:1.0/0003:046D:C548.0007/input/input15/event15" [ 9.141] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 18) [ 9.141] (**) Option "xkb_model" "pc105+inet" [ 9.141] (**) Option "xkb_layout" "us" [ 9.141] (**) Option "xkb_options" "terminate:ctrl_alt_bksp" [ 9.143] (II) event15 - Logitech USB Receiver: is tagged by udev as: Keyboard [ 9.143] (II) event15 - Logitech USB Receiver: device is a keyboard [ 9.145] (II) config/udev: Adding input device Logitech USB Receiver Mouse (/dev/input/event16) [ 9.145] (**) Logitech USB Receiver Mouse: Applying InputClass "libinput pointer catchall" [ 9.145] (II) Using input driver 'libinput' for 'Logitech USB Receiver Mouse' [ 9.145] (**) Logitech USB Receiver Mouse: always reports core events [ 9.145] (**) Option "Device" "/dev/input/event16" [ 9.146] (II) event16 - Logitech USB Receiver Mouse: is tagged by udev as: Mouse [ 9.146] (II) event16 - Logitech USB Receiver Mouse: device set to 1000 DPI [ 9.146] (II) event16 - Logitech USB Receiver Mouse: device is a pointer [ 9.147] (II) event16 - Logitech USB Receiver Mouse: device removed [ 9.178] (II) libinput: Logitech USB Receiver Mouse: Step value 0 was provided, libinput Fallback acceleration function is used. [ 9.178] (II) libinput: Logitech USB Receiver Mouse: Step value 0 was provided, libinput Fallback acceleration function is used. [ 9.178] (II) libinput: Logitech USB Receiver Mouse: Step value 0 was provided, libinput Fallback acceleration function is used. [ 9.178] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2.1/3-2.1:1.1/0003:046D:C548.0008/input/input16/event16" [ 9.178] (II) XINPUT: Adding extended input device "Logitech USB Receiver Mouse" (type: MOUSE, id 19) [ 9.178] (**) Option "AccelerationScheme" "none" [ 9.178] (**) Logitech USB Receiver Mouse: (accel) selected scheme none/0 [ 9.178] (**) Logitech USB Receiver Mouse: (accel) acceleration factor: 2.000 [ 9.178] (**) Logitech USB Receiver Mouse: (accel) acceleration threshold: 4 [ 9.180] (II) event16 - Logitech USB Receiver Mouse: is tagged by udev as: Mouse [ 9.180] (II) event16 - Logitech USB Receiver Mouse: device set to 1000 DPI [ 9.180] (II) event16 - Logitech USB Receiver Mouse: device is a pointer [ 9.181] (II) config/udev: Adding input device Logitech USB Receiver Mouse (/dev/input/mouse1) [ 9.181] (II) No input driver specified, ignoring this device. [ 9.181] (II) This device may have been added with another device file. [ 9.182] (II) config/udev: Adding input device Logitech USB Receiver Consumer Control (/dev/input/event17) [ 9.182] (**) Logitech USB Receiver Consumer Control: Applying InputClass "libinput keyboard catchall" [ 9.182] (**) Logitech USB Receiver Consumer Control: Applying InputClass "system-keyboard" [ 9.182] (II) Using input driver 'libinput' for 'Logitech USB Receiver Consumer Control' [ 9.182] (**) Logitech USB Receiver Consumer Control: always reports core events [ 9.182] (**) Option "Device" "/dev/input/event17" [ 9.183] (II) event17 - Logitech USB Receiver Consumer Control: is tagged by udev as: Keyboard [ 9.183] (II) event17 - Logitech USB Receiver Consumer Control: device is a keyboard [ 9.184] (II) event17 - Logitech USB Receiver Consumer Control: device removed [ 9.205] (II) libinput: Logitech USB Receiver Consumer Control: needs a virtual subdevice [ 9.205] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2.1/3-2.1:1.1/0003:046D:C548.0008/input/input17/event17" [ 9.205] (II) XINPUT: Adding extended input device "Logitech USB Receiver Consumer Control" (type: MOUSE, id 20) [ 9.205] (**) Option "AccelerationScheme" "none" [ 9.205] (**) Logitech USB Receiver Consumer Control: (accel) selected scheme none/0 [ 9.205] (**) Logitech USB Receiver Consumer Control: (accel) acceleration factor: 2.000 [ 9.205] (**) Logitech USB Receiver Consumer Control: (accel) acceleration threshold: 4 [ 9.207] (II) event17 - Logitech USB Receiver Consumer Control: is tagged by udev as: Keyboard [ 9.207] (II) event17 - Logitech USB Receiver Consumer Control: device is a keyboard [ 9.209] (II) config/udev: Adding input device Logitech USB Receiver System Control (/dev/input/event18) [ 9.209] (**) Logitech USB Receiver System Control: Applying InputClass "libinput keyboard catchall" [ 9.209] (**) Logitech USB Receiver System Control: Applying InputClass "system-keyboard" [ 9.209] (II) Using input driver 'libinput' for 'Logitech USB Receiver System Control' [ 9.209] (**) Logitech USB Receiver System Control: always reports core events [ 9.209] (**) Option "Device" "/dev/input/event18" [ 9.210] (II) event18 - Logitech USB Receiver System Control: is tagged by udev as: Keyboard [ 9.210] (II) event18 - Logitech USB Receiver System Control: device is a keyboard [ 9.210] (II) event18 - Logitech USB Receiver System Control: device removed [ 9.224] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2.1/3-2.1:1.1/0003:046D:C548.0008/input/input18/event18" [ 9.224] (II) XINPUT: Adding extended input device "Logitech USB Receiver System Control" (type: KEYBOARD, id 21) [ 9.224] (**) Option "xkb_model" "pc105+inet" [ 9.224] (**) Option "xkb_layout" "us" [ 9.224] (**) Option "xkb_options" "terminate:ctrl_alt_bksp" [ 9.226] (II) event18 - Logitech USB Receiver System Control: is tagged by udev as: Keyboard [ 9.226] (II) event18 - Logitech USB Receiver System Control: device is a keyboard [ 9.227] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event19) [ 9.227] (II) No input driver specified, ignoring this device. [ 9.227] (II) This device may have been added with another device file. [ 9.228] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event20) [ 9.228] (**) Logitech USB Receiver: Applying InputClass "libinput touchpad catchall" [ 9.228] (II) Using input driver 'libinput' for 'Logitech USB Receiver' [ 9.228] (**) Logitech USB Receiver: always reports core events [ 9.228] (**) Option "Device" "/dev/input/event20" [ 9.281] (II) event20 - Logitech USB Receiver: is tagged by udev as: Touchpad [ 9.283] (II) event20 - Logitech USB Receiver: device is a touchpad [ 9.283] (II) event20 - Logitech USB Receiver: device removed [ 9.310] (II) libinput: Logitech USB Receiver: Step value 0 was provided, libinput Fallback acceleration function is used. [ 9.310] (II) libinput: Logitech USB Receiver: Step value 0 was provided, libinput Fallback acceleration function is used. [ 9.310] (II) libinput: Logitech USB Receiver: Step value 0 was provided, libinput Fallback acceleration function is used. [ 9.310] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2.1/3-2.1:1.3/0003:046D:C548.000A/input/input26/event20" [ 9.311] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: TOUCHPAD, id 22) [ 9.313] (**) Option "AccelerationScheme" "none" [ 9.313] (**) Logitech USB Receiver: (accel) selected scheme none/0 [ 9.313] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000 [ 9.313] (**) Logitech USB Receiver: (accel) acceleration threshold: 4 [ 9.366] (II) event20 - Logitech USB Receiver: is tagged by udev as: Touchpad [ 9.368] (II) event20 - Logitech USB Receiver: device is a touchpad [ 9.369] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse3) [ 9.369] (II) No input driver specified, ignoring this device. [ 9.369] (II) This device may have been added with another device file. [ 9.369] (II) config/udev: Adding input device ITE Tech. Inc. ITE Device(8910) Keyboard (/dev/input/event7) [ 9.369] (**) ITE Tech. Inc. ITE Device(8910) Keyboard: Applying InputClass "libinput keyboard catchall" [ 9.369] (**) ITE Tech. Inc. ITE Device(8910) Keyboard: Applying InputClass "system-keyboard" [ 9.369] (II) Using input driver 'libinput' for 'ITE Tech. Inc. ITE Device(8910) Keyboard' [ 9.369] (**) ITE Tech. Inc. ITE Device(8910) Keyboard: always reports core events [ 9.369] (**) Option "Device" "/dev/input/event7" [ 9.370] (II) event7 - ITE Tech. Inc. ITE Device(8910) Keyboard: is tagged by udev as: Keyboard [ 9.370] (II) event7 - ITE Tech. Inc. ITE Device(8910) Keyboard: device is a keyboard [ 9.370] (II) event7 - ITE Tech. Inc. ITE Device(8910) Keyboard: device removed [ 9.390] (II) libinput: ITE Tech. Inc. ITE Device(8910) Keyboard: needs a virtual subdevice [ 9.390] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-5/3-5:1.0/0003:048D:C102.0002/input/input7/event7" [ 9.390] (II) XINPUT: Adding extended input device "ITE Tech. Inc. ITE Device(8910) Keyboard" (type: MOUSE, id 23) [ 9.390] (**) Option "AccelerationScheme" "none" [ 9.390] (**) ITE Tech. Inc. ITE Device(8910) Keyboard: (accel) selected scheme none/0 [ 9.390] (**) ITE Tech. Inc. ITE Device(8910) Keyboard: (accel) acceleration factor: 2.000 [ 9.390] (**) ITE Tech. Inc. ITE Device(8910) Keyboard: (accel) acceleration threshold: 4 [ 9.393] (II) event7 - ITE Tech. Inc. ITE Device(8910) Keyboard: is tagged by udev as: Keyboard [ 9.393] (II) event7 - ITE Tech. Inc. ITE Device(8910) Keyboard: device is a keyboard [ 9.396] (II) config/udev: Adding input device ITE Tech. Inc. ITE Device(8910) Wireless Radio Control (/dev/input/event8) [ 9.396] (**) ITE Tech. Inc. ITE Device(8910) Wireless Radio Control: Applying InputClass "libinput keyboard catchall" [ 9.396] (**) ITE Tech. Inc. ITE Device(8910) Wireless Radio Control: Applying InputClass "system-keyboard" [ 9.396] (II) Using input driver 'libinput' for 'ITE Tech. Inc. ITE Device(8910) Wireless Radio Control' [ 9.396] (**) ITE Tech. Inc. ITE Device(8910) Wireless Radio Control: always reports core events [ 9.396] (**) Option "Device" "/dev/input/event8" [ 9.397] (II) event8 - ITE Tech. Inc. ITE Device(8910) Wireless Radio Control: is tagged by udev as: Keyboard [ 9.397] (II) event8 - ITE Tech. Inc. ITE Device(8910) Wireless Radio Control: device is a keyboard [ 9.397] (II) event8 - ITE Tech. Inc. ITE Device(8910) Wireless Radio Control: device removed [ 9.420] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-5/3-5:1.0/0003:048D:C102.0002/input/input8/event8" [ 9.420] (II) XINPUT: Adding extended input device "ITE Tech. Inc. ITE Device(8910) Wireless Radio Control" (type: KEYBOARD, id 24) [ 9.420] (**) Option "xkb_model" "pc105+inet" [ 9.420] (**) Option "xkb_layout" "us" [ 9.420] (**) Option "xkb_options" "terminate:ctrl_alt_bksp" [ 9.422] (II) event8 - ITE Tech. Inc. ITE Device(8910) Wireless Radio Control: is tagged by udev as: Keyboard [ 9.422] (II) event8 - ITE Tech. Inc. ITE Device(8910) Wireless Radio Control: device is a keyboard [ 9.424] (II) config/udev: Adding input device ITE Tech. Inc. ITE Device(8295) Keyboard (/dev/input/event23) [ 9.424] (**) ITE Tech. Inc. ITE Device(8295) Keyboard: Applying InputClass "libinput keyboard catchall" [ 9.424] (**) ITE Tech. Inc. ITE Device(8295) Keyboard: Applying InputClass "system-keyboard" [ 9.424] (II) Using input driver 'libinput' for 'ITE Tech. Inc. ITE Device(8295) Keyboard' [ 9.424] (**) ITE Tech. Inc. ITE Device(8295) Keyboard: always reports core events [ 9.424] (**) Option "Device" "/dev/input/event23" [ 9.425] (II) event23 - ITE Tech. Inc. ITE Device(8295) Keyboard: is tagged by udev as: Keyboard [ 9.425] (II) event23 - ITE Tech. Inc. ITE Device(8295) Keyboard: device is a keyboard [ 9.426] (II) event23 - ITE Tech. Inc. ITE Device(8295) Keyboard: device removed [ 9.447] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9:1.0/0003:048D:C975.000D/input/input25/event23" [ 9.447] (II) XINPUT: Adding extended input device "ITE Tech. Inc. ITE Device(8295) Keyboard" (type: KEYBOARD, id 25) [ 9.447] (**) Option "xkb_model" "pc105+inet" [ 9.447] (**) Option "xkb_layout" "us" [ 9.447] (**) Option "xkb_options" "terminate:ctrl_alt_bksp" [ 9.449] (II) event23 - ITE Tech. Inc. ITE Device(8295) Keyboard: is tagged by udev as: Keyboard [ 9.449] (II) event23 - ITE Tech. Inc. ITE Device(8295) Keyboard: device is a keyboard [ 9.450] (II) config/udev: Adding input device SYNA2BA6:00 06CB:CE78 Mouse (/dev/input/event26) [ 9.450] (**) SYNA2BA6:00 06CB:CE78 Mouse: Applying InputClass "libinput pointer catchall" [ 9.450] (II) Using input driver 'libinput' for 'SYNA2BA6:00 06CB:CE78 Mouse' [ 9.450] (**) SYNA2BA6:00 06CB:CE78 Mouse: always reports core events [ 9.450] (**) Option "Device" "/dev/input/event26" [ 9.451] (II) event26 - SYNA2BA6:00 06CB:CE78 Mouse: is tagged by udev as: Mouse Pointingstick [ 9.452] (II) event26 - SYNA2BA6:00 06CB:CE78 Mouse: device is a pointer [ 9.454] (II) event26 - SYNA2BA6:00 06CB:CE78 Mouse: device removed [ 9.484] (II) libinput: SYNA2BA6:00 06CB:CE78 Mouse: Step value 0 was provided, libinput Fallback acceleration function is used. [ 9.484] (II) libinput: SYNA2BA6:00 06CB:CE78 Mouse: Step value 0 was provided, libinput Fallback acceleration function is used. [ 9.484] (II) libinput: SYNA2BA6:00 06CB:CE78 Mouse: Step value 0 was provided, libinput Fallback acceleration function is used. [ 9.484] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-14/i2c-SYNA2BA6:00/0018:06CB:CE78.000F/input/input29/event26" [ 9.484] (II) XINPUT: Adding extended input device "SYNA2BA6:00 06CB:CE78 Mouse" (type: MOUSE, id 26) [ 9.484] (**) Option "AccelerationScheme" "none" [ 9.484] (**) SYNA2BA6:00 06CB:CE78 Mouse: (accel) selected scheme none/0 [ 9.484] (**) SYNA2BA6:00 06CB:CE78 Mouse: (accel) acceleration factor: 2.000 [ 9.484] (**) SYNA2BA6:00 06CB:CE78 Mouse: (accel) acceleration threshold: 4 [ 9.486] (II) event26 - SYNA2BA6:00 06CB:CE78 Mouse: is tagged by udev as: Mouse Pointingstick [ 9.486] (II) event26 - SYNA2BA6:00 06CB:CE78 Mouse: device is a pointer [ 9.489] (II) config/udev: Adding input device SYNA2BA6:00 06CB:CE78 Mouse (/dev/input/mouse4) [ 9.489] (II) No input driver specified, ignoring this device. [ 9.489] (II) This device may have been added with another device file. [ 9.490] (II) config/udev: Adding input device SYNA2BA6:00 06CB:CE78 Touchpad (/dev/input/event27) [ 9.490] (**) SYNA2BA6:00 06CB:CE78 Touchpad: Applying InputClass "libinput touchpad catchall" [ 9.490] (II) Using input driver 'libinput' for 'SYNA2BA6:00 06CB:CE78 Touchpad' [ 9.490] (**) SYNA2BA6:00 06CB:CE78 Touchpad: always reports core events [ 9.490] (**) Option "Device" "/dev/input/event27" [ 9.491] (II) event27 - SYNA2BA6:00 06CB:CE78 Touchpad: is tagged by udev as: Touchpad [ 9.493] (II) event27 - SYNA2BA6:00 06CB:CE78 Touchpad: device is a touchpad [ 9.493] (II) event27 - SYNA2BA6:00 06CB:CE78 Touchpad: device removed [ 9.521] (II) libinput: SYNA2BA6:00 06CB:CE78 Touchpad: Step value 0 was provided, libinput Fallback acceleration function is used. [ 9.521] (II) libinput: SYNA2BA6:00 06CB:CE78 Touchpad: Step value 0 was provided, libinput Fallback acceleration function is used. [ 9.521] (II) libinput: SYNA2BA6:00 06CB:CE78 Touchpad: Step value 0 was provided, libinput Fallback acceleration function is used. [ 9.522] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-14/i2c-SYNA2BA6:00/0018:06CB:CE78.000F/input/input30/event27" [ 9.522] (II) XINPUT: Adding extended input device "SYNA2BA6:00 06CB:CE78 Touchpad" (type: TOUCHPAD, id 27) [ 9.524] (**) Option "AccelerationScheme" "none" [ 9.524] (**) SYNA2BA6:00 06CB:CE78 Touchpad: (accel) selected scheme none/0 [ 9.524] (**) SYNA2BA6:00 06CB:CE78 Touchpad: (accel) acceleration factor: 2.000 [ 9.524] (**) SYNA2BA6:00 06CB:CE78 Touchpad: (accel) acceleration threshold: 4 [ 9.525] (II) event27 - SYNA2BA6:00 06CB:CE78 Touchpad: is tagged by udev as: Touchpad [ 9.527] (II) event27 - SYNA2BA6:00 06CB:CE78 Touchpad: device is a touchpad [ 9.528] (II) config/udev: Adding input device SYNA2BA6:00 06CB:CE78 Touchpad (/dev/input/mouse5) [ 9.528] (II) No input driver specified, ignoring this device. [ 9.528] (II) This device may have been added with another device file. [ 9.528] (II) config/udev: Adding input device Ideapad extra buttons (/dev/input/event25) [ 9.528] (**) Ideapad extra buttons: Applying InputClass "libinput keyboard catchall" [ 9.528] (**) Ideapad extra buttons: Applying InputClass "system-keyboard" [ 9.528] (II) Using input driver 'libinput' for 'Ideapad extra buttons' [ 9.528] (**) Ideapad extra buttons: always reports core events [ 9.528] (**) Option "Device" "/dev/input/event25" [ 9.529] (II) event25 - Ideapad extra buttons: is tagged by udev as: Keyboard [ 9.529] (II) event25 - Ideapad extra buttons: device is a keyboard [ 9.529] (II) event25 - Ideapad extra buttons: device removed [ 9.557] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1f.0/PNP0C09:00/VPC2004:00/input/input28/event25" [ 9.557] (II) XINPUT: Adding extended input device "Ideapad extra buttons" (type: KEYBOARD, id 28) [ 9.557] (**) Option "xkb_model" "pc105+inet" [ 9.557] (**) Option "xkb_layout" "us" [ 9.557] (**) Option "xkb_options" "terminate:ctrl_alt_bksp" [ 9.558] (II) event25 - Ideapad extra buttons: is tagged by udev as: Keyboard [ 9.559] (II) event25 - Ideapad extra buttons: device is a keyboard [ 9.560] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event28) [ 9.560] (II) No input driver specified, ignoring this device. [ 9.560] (II) This device may have been added with another device file. [ 9.560] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event29) [ 9.560] (II) No input driver specified, ignoring this device. [ 9.560] (II) This device may have been added with another device file. [ 9.560] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event30) [ 9.560] (II) No input driver specified, ignoring this device. [ 9.560] (II) This device may have been added with another device file. [ 9.561] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event31) [ 9.561] (II) No input driver specified, ignoring this device. [ 9.561] (II) This device may have been added with another device file. [ 9.561] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=8 (/dev/input/event256) [ 9.561] (II) No input driver specified, ignoring this device. [ 9.561] (II) This device may have been added with another device file. [ 9.561] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=9 (/dev/input/event257) [ 9.561] (II) No input driver specified, ignoring this device. [ 9.561] (II) This device may have been added with another device file. [ 9.562] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3) [ 9.562] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall" [ 9.562] (**) AT Translated Set 2 keyboard: Applying InputClass "system-keyboard" [ 9.562] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard' [ 9.562] (**) AT Translated Set 2 keyboard: always reports core events [ 9.562] (**) Option "Device" "/dev/input/event3" [ 9.563] (II) event3 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard [ 9.563] (II) event3 - AT Translated Set 2 keyboard: device is a keyboard [ 9.565] (II) event3 - AT Translated Set 2 keyboard: device removed [ 9.578] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input3/event3" [ 9.578] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 29) [ 9.578] (**) Option "xkb_model" "pc105+inet" [ 9.578] (**) Option "xkb_layout" "us" [ 9.578] (**) Option "xkb_options" "terminate:ctrl_alt_bksp" [ 9.579] (II) event3 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard [ 9.579] (II) event3 - AT Translated Set 2 keyboard: device is a keyboard [ 9.582] (II) config/udev: Adding input device PC Speaker (/dev/input/event24) [ 9.582] (II) No input driver specified, ignoring this device. [ 9.582] (II) This device may have been added with another device file. [ 9.584] (II) config/udev: Adding input device LogiOps Virtual Input (/dev/input/event262) [ 9.584] (**) LogiOps Virtual Input: Applying InputClass "libinput keyboard catchall" [ 9.584] (**) LogiOps Virtual Input: Applying InputClass "system-keyboard" [ 9.584] (II) Using input driver 'libinput' for 'LogiOps Virtual Input' [ 9.584] (**) LogiOps Virtual Input: always reports core events [ 9.584] (**) Option "Device" "/dev/input/event262" [ 9.584] (II) event262 - LogiOps Virtual Input: is tagged by udev as: Keyboard [ 9.584] (II) event262 - LogiOps Virtual Input: device is a keyboard [ 9.585] (II) event262 - LogiOps Virtual Input: device removed [ 9.605] (**) Option "config_info" "udev:/sys/devices/virtual/input/input42/event262" [ 9.605] (II) XINPUT: Adding extended input device "LogiOps Virtual Input" (type: KEYBOARD, id 30) [ 9.605] (**) Option "xkb_model" "pc105+inet" [ 9.605] (**) Option "xkb_layout" "us" [ 9.605] (**) Option "xkb_options" "terminate:ctrl_alt_bksp" [ 9.606] (II) event262 - LogiOps Virtual Input: is tagged by udev as: Keyboard [ 9.606] (II) event262 - LogiOps Virtual Input: device is a keyboard [ 9.657] (**) HOLTEK USB-HID Keyboard Consumer Control: Applying InputClass "libinput keyboard catchall" [ 9.657] (**) HOLTEK USB-HID Keyboard Consumer Control: Applying InputClass "system-keyboard" [ 9.657] (II) Using input driver 'libinput' for 'HOLTEK USB-HID Keyboard Consumer Control' [ 9.657] (**) HOLTEK USB-HID Keyboard Consumer Control: always reports core events [ 9.657] (**) Option "Device" "/dev/input/event12" [ 9.657] (II) libinput: HOLTEK USB-HID Keyboard Consumer Control: is a virtual subdevice [ 9.657] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1.3/3-1.3:1.2/0003:04D9:A12A.0005/input/input12/event12" [ 9.657] (II) XINPUT: Adding extended input device "HOLTEK USB-HID Keyboard Consumer Control" (type: KEYBOARD, id 31) [ 9.657] (**) Option "xkb_model" "pc105+inet" [ 9.657] (**) Option "xkb_layout" "us" [ 9.657] (**) Option "xkb_options" "terminate:ctrl_alt_bksp" [ 9.658] (**) Logitech Gaming Mouse G502 Keyboard: Applying InputClass "libinput keyboard catchall" [ 9.658] (**) Logitech Gaming Mouse G502 Keyboard: Applying InputClass "system-keyboard" [ 9.658] (II) Using input driver 'libinput' for 'Logitech Gaming Mouse G502 Keyboard' [ 9.658] (**) Logitech Gaming Mouse G502 Keyboard: always reports core events [ 9.658] (**) Option "Device" "/dev/input/event22" [ 9.658] (II) libinput: Logitech Gaming Mouse G502 Keyboard: is a virtual subdevice [ 9.658] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1.4/3-1.4:1.1/0003:046D:C332.000C/input/input22/event22" [ 9.658] (II) XINPUT: Adding extended input device "Logitech Gaming Mouse G502 Keyboard" (type: KEYBOARD, id 32) [ 9.658] (**) Option "xkb_model" "pc105+inet" [ 9.658] (**) Option "xkb_layout" "us" [ 9.658] (**) Option "xkb_options" "terminate:ctrl_alt_bksp" [ 9.658] (**) Logitech USB Receiver Consumer Control: Applying InputClass "libinput keyboard catchall" [ 9.658] (**) Logitech USB Receiver Consumer Control: Applying InputClass "system-keyboard" [ 9.658] (II) Using input driver 'libinput' for 'Logitech USB Receiver Consumer Control' [ 9.658] (**) Logitech USB Receiver Consumer Control: always reports core events [ 9.658] (**) Option "Device" "/dev/input/event17" [ 9.658] (II) libinput: Logitech USB Receiver Consumer Control: is a virtual subdevice [ 9.658] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2.1/3-2.1:1.1/0003:046D:C548.0008/input/input17/event17" [ 9.658] (II) XINPUT: Adding extended input device "Logitech USB Receiver Consumer Control" (type: KEYBOARD, id 33) [ 9.658] (**) Option "xkb_model" "pc105+inet" [ 9.658] (**) Option "xkb_layout" "us" [ 9.658] (**) Option "xkb_options" "terminate:ctrl_alt_bksp" [ 9.658] (**) ITE Tech. Inc. ITE Device(8910) Keyboard: Applying InputClass "libinput keyboard catchall" [ 9.658] (**) ITE Tech. Inc. ITE Device(8910) Keyboard: Applying InputClass "system-keyboard" [ 9.658] (II) Using input driver 'libinput' for 'ITE Tech. Inc. ITE Device(8910) Keyboard' [ 9.658] (**) ITE Tech. Inc. ITE Device(8910) Keyboard: always reports core events [ 9.658] (**) Option "Device" "/dev/input/event7" [ 9.658] (II) libinput: ITE Tech. Inc. ITE Device(8910) Keyboard: is a virtual subdevice [ 9.658] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-5/3-5:1.0/0003:048D:C102.0002/input/input7/event7" [ 9.658] (II) XINPUT: Adding extended input device "ITE Tech. Inc. ITE Device(8910) Keyboard" (type: KEYBOARD, id 34) [ 9.658] (**) Option "xkb_model" "pc105+inet" [ 9.658] (**) Option "xkb_layout" "us" [ 9.658] (**) Option "xkb_options" "terminate:ctrl_alt_bksp" [ 17.782] (II) event2 - Power Button: device removed [ 17.794] (II) event5 - Video Bus: device removed [ 17.816] (II) event4 - Video Bus: device removed [ 17.843] (II) event1 - Power Button: device removed [ 17.853] (II) event6 - USB Sound Device : device removed [ 17.873] (II) event9 - HOLTEK USB-HID Keyboard: device removed [ 17.883] (II) event10 - HOLTEK USB-HID Keyboard Mouse: device removed [ 17.903] (II) event11 - HOLTEK USB-HID Keyboard System Control: device removed [ 17.913] (II) event14 - HOLTEK USB-HID Keyboard: device removed [ 17.923] (II) event21 - Logitech Gaming Mouse G502: device removed [ 17.946] (II) event15 - Logitech USB Receiver: device removed [ 17.956] (II) event16 - Logitech USB Receiver Mouse: device removed [ 17.976] (II) event18 - Logitech USB Receiver System Control: device removed [ 17.986] (II) event20 - Logitech USB Receiver: device removed [ 18.008] (II) event8 - ITE Tech. Inc. ITE Device(8910) Wireless Radio Control: device removed [ 18.028] (II) event23 - ITE Tech. Inc. ITE Device(8295) Keyboard: device removed [ 18.038] (II) event26 - SYNA2BA6:00 06CB:CE78 Mouse: device removed [ 18.058] (II) event27 - SYNA2BA6:00 06CB:CE78 Touchpad: device removed [ 18.078] (II) event25 - Ideapad extra buttons: device removed [ 18.098] (II) event3 - AT Translated Set 2 keyboard: device removed [ 18.108] (II) event262 - LogiOps Virtual Input: device removed [ 18.118] (II) event12 - HOLTEK USB-HID Keyboard Consumer Control: device removed [ 18.128] (II) event22 - Logitech Gaming Mouse G502 Keyboard: device removed [ 18.138] (II) event17 - Logitech USB Receiver Consumer Control: device removed [ 18.148] (II) event7 - ITE Tech. Inc. ITE Device(8910) Keyboard: device removed [ 18.158] (II) AIGLX: Suspending AIGLX clients for VT switch [ 617.577] (WW) NVIDIA(G0): Failed to set the display configuration [ 617.577] (WW) NVIDIA(G0): - Setting a mode on head 0 failed: Insufficient permissions [ 617.577] (WW) NVIDIA(G0): - Setting a mode on head 1 failed: Insufficient permissions [ 617.577] (WW) NVIDIA(G0): - Setting a mode on head 2 failed: Insufficient permissions [ 617.577] (WW) NVIDIA(G0): - Setting a mode on head 3 failed: Insufficient permissions [ 617.584] (WW) NVIDIA(G0): Failed to set the display configuration [ 617.584] (WW) NVIDIA(G0): - Setting a mode on head 0 failed: Insufficient permissions [ 617.584] (WW) NVIDIA(G0): - Setting a mode on head 1 failed: Insufficient permissions [ 617.584] (WW) NVIDIA(G0): - Setting a mode on head 2 failed: Insufficient permissions [ 617.584] (WW) NVIDIA(G0): - Setting a mode on head 3 failed: Insufficient permissions [ 617.584] (WW) NVIDIA(G0): Failed to set DPMS to off [ 20872.280] (II) config/udev: removing device Video Bus [ 20872.280] (II) UnloadModule: "libinput" [ 20872.281] (II) config/udev: Adding input device Video Bus (/dev/input/event4) [ 20872.281] (**) Video Bus: Applying InputClass "libinput keyboard catchall" [ 20872.281] (**) Video Bus: Applying InputClass "system-keyboard" [ 20872.281] (II) Using input driver 'libinput' for 'Video Bus' [ 20872.281] (**) Video Bus: always reports core events [ 20872.281] (**) Option "Device" "/dev/input/event4" [ 20872.281] (II) event4 - Video Bus: is tagged by udev as: Keyboard [ 20872.281] (II) event4 - Video Bus: device is a keyboard [ 20872.281] (II) event4 - Video Bus: device removed [ 20872.304] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:03/LNXVIDEO:00/input/input4/event4" [ 20872.304] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8) [ 20872.304] (**) Option "xkb_model" "pc105+inet" [ 20872.304] (**) Option "xkb_layout" "us" [ 20872.304] (**) Option "xkb_options" "terminate:ctrl_alt_bksp" [ 20872.304] (II) config/udev: removing device Video Bus [ 20872.304] (II) UnloadModule: "libinput" [ 20872.304] (II) config/udev: Adding input device Video Bus (/dev/input/event5) [ 20872.304] (**) Video Bus: Applying InputClass "libinput keyboard catchall" [ 20872.304] (**) Video Bus: Applying InputClass "system-keyboard" [ 20872.304] (II) Using input driver 'libinput' for 'Video Bus' [ 20872.304] (**) Video Bus: always reports core events [ 20872.304] (**) Option "Device" "/dev/input/event5" [ 20872.305] (II) event5 - Video Bus: is tagged by udev as: Keyboard [ 20872.305] (II) event5 - Video Bus: device is a keyboard [ 20872.305] (II) event5 - Video Bus: device removed [ 20872.326] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input5/event5" [ 20872.326] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7) [ 20872.326] (**) Option "xkb_model" "pc105+inet" [ 20872.326] (**) Option "xkb_layout" "us" [ 20872.326] (**) Option "xkb_options" "terminate:ctrl_alt_bksp" [ 20872.326] (II) config/udev: removing device Power Button [ 20872.326] (II) UnloadModule: "libinput" [ 20872.326] (II) config/udev: Adding input device Power Button (/dev/input/event2) [ 20872.326] (**) Power Button: Applying InputClass "libinput keyboard catchall" [ 20872.326] (**) Power Button: Applying InputClass "system-keyboard" [ 20872.326] (II) Using input driver 'libinput' for 'Power Button' [ 20872.326] (**) Power Button: always reports core events [ 20872.326] (**) Option "Device" "/dev/input/event2" [ 20872.327] (II) event2 - Power Button: is tagged by udev as: Keyboard [ 20872.327] (II) event2 - Power Button: device is a keyboard [ 20872.327] (II) event2 - Power Button: device removed [ 20872.336] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2" [ 20872.336] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6) [ 20872.336] (**) Option "xkb_model" "pc105+inet" [ 20872.336] (**) Option "xkb_layout" "us" [ 20872.336] (**) Option "xkb_options" "terminate:ctrl_alt_bksp" [ 20872.342] (II) config/udev: removing device Power Button [ 20872.342] (II) UnloadModule: "libinput" [ 20872.342] (II) config/udev: Adding input device Power Button (/dev/input/event1) [ 20872.342] (**) Power Button: Applying InputClass "libinput keyboard catchall" [ 20872.342] (**) Power Button: Applying InputClass "system-keyboard" [ 20872.342] (II) Using input driver 'libinput' for 'Power Button' [ 20872.342] (**) Power Button: always reports core events [ 20872.342] (**) Option "Device" "/dev/input/event1" [ 20872.343] (II) event1 - Power Button: is tagged by udev as: Keyboard [ 20872.343] (II) event1 - Power Button: device is a keyboard [ 20872.343] (II) event1 - Power Button: device removed [ 20872.357] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1/event1" [ 20872.357] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 9) [ 20872.357] (**) Option "xkb_model" "pc105+inet" [ 20872.357] (**) Option "xkb_layout" "us" [ 20872.357] (**) Option "xkb_options" "terminate:ctrl_alt_bksp" [ 20872.357] (II) config/udev: Adding input device Lid Switch (/dev/input/event0) [ 20872.357] (II) No input driver specified, ignoring this device. [ 20872.357] (II) This device may have been added with another device file. [ 20872.357] (II) config/udev: Adding input device HOLTEK USB-HID Keyboard Mouse (/dev/input/mouse0) [ 20872.357] (II) No input driver specified, ignoring this device. [ 20872.357] (II) This device may have been added with another device file. [ 20872.358] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse3) [ 20872.358] (II) No input driver specified, ignoring this device. [ 20872.358] (II) This device may have been added with another device file. [ 20872.359] (II) config/udev: Adding input device Logitech USB Receiver Mouse (/dev/input/mouse1) [ 20872.359] (II) No input driver specified, ignoring this device. [ 20872.359] (II) This device may have been added with another device file. [ 20872.359] (II) config/udev: Adding input device Logitech Gaming Mouse G502 (/dev/input/mouse2) [ 20872.359] (II) No input driver specified, ignoring this device. [ 20872.359] (II) This device may have been added with another device file. [ 20872.359] (II) config/udev: removing device Logitech USB Receiver [ 20872.359] (II) UnloadModule: "libinput" [ 20872.359] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event15) [ 20872.359] (**) Logitech USB Receiver: Applying InputClass "libinput keyboard catchall" [ 20872.359] (**) Logitech USB Receiver: Applying InputClass "system-keyboard" [ 20872.359] (II) Using input driver 'libinput' for 'Logitech USB Receiver' [ 20872.359] (**) Logitech USB Receiver: always reports core events [ 20872.359] (**) Option "Device" "/dev/input/event15" [ 20872.369] (II) event15 - Logitech USB Receiver: is tagged by udev as: Keyboard [ 20872.371] (II) event15 - Logitech USB Receiver: device is a keyboard [ 20872.375] (II) event15 - Logitech USB Receiver: device removed [ 20872.388] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2.1/3-2.1:1.0/0003:046D:C548.0007/input/input15/event15" [ 20872.388] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 18) [ 20872.388] (**) Option "xkb_model" "pc105+inet" [ 20872.388] (**) Option "xkb_layout" "us" [ 20872.388] (**) Option "xkb_options" "terminate:ctrl_alt_bksp" [ 20872.388] (II) config/udev: removing device HOLTEK USB-HID Keyboard [ 20872.388] (II) UnloadModule: "libinput" [ 20872.388] (II) config/udev: Adding input device HOLTEK USB-HID Keyboard (/dev/input/event14) [ 20872.388] (**) HOLTEK USB-HID Keyboard: Applying InputClass "libinput keyboard catchall" [ 20872.388] (**) HOLTEK USB-HID Keyboard: Applying InputClass "system-keyboard" [ 20872.388] (II) Using input driver 'libinput' for 'HOLTEK USB-HID Keyboard' [ 20872.388] (**) HOLTEK USB-HID Keyboard: always reports core events [ 20872.388] (**) Option "Device" "/dev/input/event14" [ 20872.390] (II) event14 - HOLTEK USB-HID Keyboard: is tagged by udev as: Keyboard [ 20872.390] (II) event14 - HOLTEK USB-HID Keyboard: device is a keyboard [ 20872.390] (II) event14 - HOLTEK USB-HID Keyboard: device removed [ 20872.406] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1.3/3-1.3:1.2/0003:04D9:A12A.0005/input/input14/event14" [ 20872.406] (II) XINPUT: Adding extended input device "HOLTEK USB-HID Keyboard" (type: KEYBOARD, id 15) [ 20872.406] (**) Option "xkb_model" "pc105+inet" [ 20872.406] (**) Option "xkb_layout" "us" [ 20872.406] (**) Option "xkb_options" "terminate:ctrl_alt_bksp" [ 20872.406] (II) config/udev: Adding input device SYNA2BA6:00 06CB:CE78 Touchpad (/dev/input/mouse5) [ 20872.406] (II) No input driver specified, ignoring this device. [ 20872.406] (II) This device may have been added with another device file. [ 20872.406] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event259) [ 20872.406] (II) No input driver specified, ignoring this device. [ 20872.406] (II) This device may have been added with another device file. [ 20872.407] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event261) [ 20872.407] (II) No input driver specified, ignoring this device. [ 20872.407] (II) This device may have been added with another device file. [ 20872.407] (II) config/udev: removing device HOLTEK USB-HID Keyboard Mouse [ 20872.407] (II) UnloadModule: "libinput" [ 20872.407] (II) config/udev: Adding input device HOLTEK USB-HID Keyboard Mouse (/dev/input/event10) [ 20872.407] (**) HOLTEK USB-HID Keyboard Mouse: Applying InputClass "libinput pointer catchall" [ 20872.407] (II) Using input driver 'libinput' for 'HOLTEK USB-HID Keyboard Mouse' [ 20872.407] (**) HOLTEK USB-HID Keyboard Mouse: always reports core events [ 20872.407] (**) Option "Device" "/dev/input/event10" [ 20872.408] (II) event10 - HOLTEK USB-HID Keyboard Mouse: is tagged by udev as: Mouse [ 20872.408] (II) event10 - HOLTEK USB-HID Keyboard Mouse: device is a pointer [ 20872.408] (II) event10 - HOLTEK USB-HID Keyboard Mouse: device removed [ 20872.425] (II) libinput: HOLTEK USB-HID Keyboard Mouse: Step value 0 was provided, libinput Fallback acceleration function is used. [ 20872.425] (II) libinput: HOLTEK USB-HID Keyboard Mouse: Step value 0 was provided, libinput Fallback acceleration function is used. [ 20872.425] (II) libinput: HOLTEK USB-HID Keyboard Mouse: Step value 0 was provided, libinput Fallback acceleration function is used. [ 20872.425] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1.3/3-1.3:1.2/0003:04D9:A12A.0005/input/input10/event10" [ 20872.425] (II) XINPUT: Adding extended input device "HOLTEK USB-HID Keyboard Mouse" (type: MOUSE, id 12) [ 20872.425] (**) Option "AccelerationScheme" "none" [ 20872.425] (**) HOLTEK USB-HID Keyboard Mouse: (accel) selected scheme none/0 [ 20872.425] (**) HOLTEK USB-HID Keyboard Mouse: (accel) acceleration factor: 2.000 [ 20872.425] (**) HOLTEK USB-HID Keyboard Mouse: (accel) acceleration threshold: 4 [ 20872.425] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event258) [ 20872.425] (II) No input driver specified, ignoring this device. [ 20872.425] (II) This device may have been added with another device file. [ 20872.425] (II) config/udev: removing device HOLTEK USB-HID Keyboard System Control [ 20872.425] (II) UnloadModule: "libinput" [ 20872.425] (II) config/udev: Adding input device HOLTEK USB-HID Keyboard System Control (/dev/input/event11) [ 20872.425] (**) HOLTEK USB-HID Keyboard System Control: Applying InputClass "libinput keyboard catchall" [ 20872.425] (**) HOLTEK USB-HID Keyboard System Control: Applying InputClass "system-keyboard" [ 20872.425] (II) Using input driver 'libinput' for 'HOLTEK USB-HID Keyboard System Control' [ 20872.425] (**) HOLTEK USB-HID Keyboard System Control: always reports core events [ 20872.425] (**) Option "Device" "/dev/input/event11" [ 20872.426] (II) event11 - HOLTEK USB-HID Keyboard System Control: is tagged by udev as: Keyboard [ 20872.426] (II) event11 - HOLTEK USB-HID Keyboard System Control: device is a keyboard [ 20872.426] (II) event11 - HOLTEK USB-HID Keyboard System Control: device removed [ 20872.433] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1.3/3-1.3:1.2/0003:04D9:A12A.0005/input/input11/event11" [ 20872.433] (II) XINPUT: Adding extended input device "HOLTEK USB-HID Keyboard System Control" (type: KEYBOARD, id 13) [ 20872.433] (**) Option "xkb_model" "pc105+inet" [ 20872.433] (**) Option "xkb_layout" "us" [ 20872.433] (**) Option "xkb_options" "terminate:ctrl_alt_bksp" [ 20872.433] (II) config/udev: removing device HOLTEK USB-HID Keyboard [ 20872.433] (II) UnloadModule: "libinput" [ 20872.433] (II) config/udev: Adding input device HOLTEK USB-HID Keyboard (/dev/input/event9) [ 20872.433] (**) HOLTEK USB-HID Keyboard: Applying InputClass "libinput keyboard catchall" [ 20872.433] (**) HOLTEK USB-HID Keyboard: Applying InputClass "system-keyboard" [ 20872.433] (II) Using input driver 'libinput' for 'HOLTEK USB-HID Keyboard' [ 20872.433] (**) HOLTEK USB-HID Keyboard: always reports core events [ 20872.433] (**) Option "Device" "/dev/input/event9" [ 20872.434] (II) event9 - HOLTEK USB-HID Keyboard: is tagged by udev as: Keyboard [ 20872.434] (II) event9 - HOLTEK USB-HID Keyboard: device is a keyboard [ 20872.434] (II) event9 - HOLTEK USB-HID Keyboard: device removed [ 20872.445] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1.3/3-1.3:1.0/0003:04D9:A12A.0003/input/input9/event9" [ 20872.445] (II) XINPUT: Adding extended input device "HOLTEK USB-HID Keyboard" (type: KEYBOARD, id 11) [ 20872.445] (**) Option "xkb_model" "pc105+inet" [ 20872.445] (**) Option "xkb_layout" "us" [ 20872.445] (**) Option "xkb_options" "terminate:ctrl_alt_bksp" [ 20872.445] (II) config/udev: removing device HOLTEK USB-HID Keyboard Consumer Control [ 20872.445] (II) UnloadModule: "libinput" [ 20872.445] (II) config/udev: removing device HOLTEK USB-HID Keyboard Consumer Control [ 20872.445] (II) UnloadModule: "libinput" [ 20872.445] (II) config/udev: Adding input device HOLTEK USB-HID Keyboard Consumer Control (/dev/input/event12) [ 20872.445] (**) HOLTEK USB-HID Keyboard Consumer Control: Applying InputClass "libinput keyboard catchall" [ 20872.445] (**) HOLTEK USB-HID Keyboard Consumer Control: Applying InputClass "system-keyboard" [ 20872.445] (II) Using input driver 'libinput' for 'HOLTEK USB-HID Keyboard Consumer Control' [ 20872.445] (**) HOLTEK USB-HID Keyboard Consumer Control: always reports core events [ 20872.445] (**) Option "Device" "/dev/input/event12" [ 20872.446] (II) event12 - HOLTEK USB-HID Keyboard Consumer Control: is tagged by udev as: Keyboard [ 20872.446] (II) event12 - HOLTEK USB-HID Keyboard Consumer Control: device is a keyboard [ 20872.446] (II) event12 - HOLTEK USB-HID Keyboard Consumer Control: device removed [ 20872.467] (II) libinput: HOLTEK USB-HID Keyboard Consumer Control: needs a virtual subdevice [ 20872.467] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1.3/3-1.3:1.2/0003:04D9:A12A.0005/input/input12/event12" [ 20872.467] (II) XINPUT: Adding extended input device "HOLTEK USB-HID Keyboard Consumer Control" (type: MOUSE, id 14) [ 20872.467] (**) Option "AccelerationScheme" "none" [ 20872.467] (**) HOLTEK USB-HID Keyboard Consumer Control: (accel) selected scheme none/0 [ 20872.467] (**) HOLTEK USB-HID Keyboard Consumer Control: (accel) acceleration factor: 2.000 [ 20872.467] (**) HOLTEK USB-HID Keyboard Consumer Control: (accel) acceleration threshold: 4 [ 20872.467] (**) HOLTEK USB-HID Keyboard Consumer Control: Applying InputClass "libinput keyboard catchall" [ 20872.467] (**) HOLTEK USB-HID Keyboard Consumer Control: Applying InputClass "system-keyboard" [ 20872.467] (II) Using input driver 'libinput' for 'HOLTEK USB-HID Keyboard Consumer Control' [ 20872.467] (**) HOLTEK USB-HID Keyboard Consumer Control: always reports core events [ 20872.467] (**) Option "Device" "/dev/input/event12" [ 20872.467] (II) libinput: HOLTEK USB-HID Keyboard Consumer Control: is a virtual subdevice [ 20872.467] (EE) libinput: HOLTEK USB-HID Keyboard Consumer Control: Parent device not available [ 20872.467] (II) event12 - HOLTEK USB-HID Keyboard Consumer Control: is tagged by udev as: Keyboard [ 20872.468] (II) event12 - HOLTEK USB-HID Keyboard Consumer Control: device is a keyboard [ 20872.468] (II) event12 - HOLTEK USB-HID Keyboard Consumer Control: device removed [ 20872.479] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1.3/3-1.3:1.2/0003:04D9:A12A.0005/input/input12/event12" [ 20872.479] (II) XINPUT: Adding extended input device "HOLTEK USB-HID Keyboard Consumer Control" (type: KEYBOARD, id 31) [ 20872.479] (**) Option "xkb_model" "pc105+inet" [ 20872.479] (**) Option "xkb_layout" "us" [ 20872.479] (**) Option "xkb_options" "terminate:ctrl_alt_bksp" [ 20872.479] (II) config/udev: removing device Logitech USB Receiver System Control [ 20872.479] (II) UnloadModule: "libinput" [ 20872.479] (II) config/udev: Adding input device Logitech USB Receiver System Control (/dev/input/event18) [ 20872.479] (**) Logitech USB Receiver System Control: Applying InputClass "libinput keyboard catchall" [ 20872.479] (**) Logitech USB Receiver System Control: Applying InputClass "system-keyboard" [ 20872.479] (II) Using input driver 'libinput' for 'Logitech USB Receiver System Control' [ 20872.479] (**) Logitech USB Receiver System Control: always reports core events [ 20872.479] (**) Option "Device" "/dev/input/event18" [ 20872.480] (II) event18 - Logitech USB Receiver System Control: is tagged by udev as: Keyboard [ 20872.480] (II) event18 - Logitech USB Receiver System Control: device is a keyboard [ 20872.480] (II) event18 - Logitech USB Receiver System Control: device removed [ 20872.496] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2.1/3-2.1:1.1/0003:046D:C548.0008/input/input18/event18" [ 20872.496] (II) XINPUT: Adding extended input device "Logitech USB Receiver System Control" (type: KEYBOARD, id 21) [ 20872.496] (**) Option "xkb_model" "pc105+inet" [ 20872.496] (**) Option "xkb_layout" "us" [ 20872.496] (**) Option "xkb_options" "terminate:ctrl_alt_bksp" [ 20872.496] (II) config/udev: removing device USB Sound Device [ 20872.496] (II) UnloadModule: "libinput" [ 20872.496] (II) config/udev: Adding input device USB Sound Device (/dev/input/event6) [ 20872.496] (**) USB Sound Device : Applying InputClass "libinput keyboard catchall" [ 20872.496] (**) USB Sound Device : Applying InputClass "system-keyboard" [ 20872.496] (II) Using input driver 'libinput' for 'USB Sound Device ' [ 20872.496] (**) USB Sound Device : always reports core events [ 20872.496] (**) Option "Device" "/dev/input/event6" [ 20872.497] (II) event6 - USB Sound Device : is tagged by udev as: Keyboard [ 20872.497] (II) event6 - USB Sound Device : device is a keyboard [ 20872.497] (II) event6 - USB Sound Device : device removed [ 20872.509] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1.2/3-1.2:1.3/0003:0D8C:0102.0001/input/input6/event6" [ 20872.509] (II) XINPUT: Adding extended input device "USB Sound Device " (type: KEYBOARD, id 10) [ 20872.509] (**) Option "xkb_model" "pc105+inet" [ 20872.509] (**) Option "xkb_layout" "us" [ 20872.509] (**) Option "xkb_options" "terminate:ctrl_alt_bksp" [ 20872.509] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event260) [ 20872.509] (II) No input driver specified, ignoring this device. [ 20872.509] (II) This device may have been added with another device file. [ 20872.509] (II) config/udev: removing device ITE Tech. Inc. ITE Device(8910) Keyboard [ 20872.509] (II) UnloadModule: "libinput" [ 20872.509] (II) config/udev: removing device ITE Tech. Inc. ITE Device(8910) Keyboard [ 20872.509] (II) UnloadModule: "libinput" [ 20872.509] (II) config/udev: Adding input device ITE Tech. Inc. ITE Device(8910) Keyboard (/dev/input/event7) [ 20872.509] (**) ITE Tech. Inc. ITE Device(8910) Keyboard: Applying InputClass "libinput keyboard catchall" [ 20872.509] (**) ITE Tech. Inc. ITE Device(8910) Keyboard: Applying InputClass "system-keyboard" [ 20872.509] (II) Using input driver 'libinput' for 'ITE Tech. Inc. ITE Device(8910) Keyboard' [ 20872.509] (**) ITE Tech. Inc. ITE Device(8910) Keyboard: always reports core events [ 20872.509] (**) Option "Device" "/dev/input/event7" [ 20872.510] (II) event7 - ITE Tech. Inc. ITE Device(8910) Keyboard: is tagged by udev as: Keyboard [ 20872.510] (II) event7 - ITE Tech. Inc. ITE Device(8910) Keyboard: device is a keyboard [ 20872.510] (II) event7 - ITE Tech. Inc. ITE Device(8910) Keyboard: device removed [ 20872.524] (II) libinput: ITE Tech. Inc. ITE Device(8910) Keyboard: needs a virtual subdevice [ 20872.524] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-5/3-5:1.0/0003:048D:C102.0002/input/input7/event7" [ 20872.524] (II) XINPUT: Adding extended input device "ITE Tech. Inc. ITE Device(8910) Keyboard" (type: MOUSE, id 23) [ 20872.524] (**) Option "AccelerationScheme" "none" [ 20872.524] (**) ITE Tech. Inc. ITE Device(8910) Keyboard: (accel) selected scheme none/0 [ 20872.524] (**) ITE Tech. Inc. ITE Device(8910) Keyboard: (accel) acceleration factor: 2.000 [ 20872.524] (**) ITE Tech. Inc. ITE Device(8910) Keyboard: (accel) acceleration threshold: 4 [ 20872.524] (**) ITE Tech. Inc. ITE Device(8910) Keyboard: Applying InputClass "libinput keyboard catchall" [ 20872.524] (**) ITE Tech. Inc. ITE Device(8910) Keyboard: Applying InputClass "system-keyboard" [ 20872.524] (II) Using input driver 'libinput' for 'ITE Tech. Inc. ITE Device(8910) Keyboard' [ 20872.524] (**) ITE Tech. Inc. ITE Device(8910) Keyboard: always reports core events [ 20872.524] (**) Option "Device" "/dev/input/event7" [ 20872.524] (II) libinput: ITE Tech. Inc. ITE Device(8910) Keyboard: is a virtual subdevice [ 20872.524] (EE) libinput: ITE Tech. Inc. ITE Device(8910) Keyboard: Parent device not available [ 20872.524] (II) event7 - ITE Tech. Inc. ITE Device(8910) Keyboard: is tagged by udev as: Keyboard [ 20872.524] (II) event7 - ITE Tech. Inc. ITE Device(8910) Keyboard: device is a keyboard [ 20872.524] (II) event7 - ITE Tech. Inc. ITE Device(8910) Keyboard: device removed [ 20872.544] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-5/3-5:1.0/0003:048D:C102.0002/input/input7/event7" [ 20872.544] (II) XINPUT: Adding extended input device "ITE Tech. Inc. ITE Device(8910) Keyboard" (type: KEYBOARD, id 34) [ 20872.544] (**) Option "xkb_model" "pc105+inet" [ 20872.544] (**) Option "xkb_layout" "us" [ 20872.544] (**) Option "xkb_options" "terminate:ctrl_alt_bksp" [ 20872.544] (II) config/udev: removing device Logitech USB Receiver Consumer Control [ 20872.544] (II) UnloadModule: "libinput" [ 20872.544] (II) config/udev: removing device Logitech USB Receiver Consumer Control [ 20872.544] (II) UnloadModule: "libinput" [ 20872.544] (II) config/udev: Adding input device Logitech USB Receiver Consumer Control (/dev/input/event17) [ 20872.544] (**) Logitech USB Receiver Consumer Control: Applying InputClass "libinput keyboard catchall" [ 20872.544] (**) Logitech USB Receiver Consumer Control: Applying InputClass "system-keyboard" [ 20872.544] (II) Using input driver 'libinput' for 'Logitech USB Receiver Consumer Control' [ 20872.544] (**) Logitech USB Receiver Consumer Control: always reports core events [ 20872.544] (**) Option "Device" "/dev/input/event17" [ 20872.545] (II) event17 - Logitech USB Receiver Consumer Control: is tagged by udev as: Keyboard [ 20872.545] (II) event17 - Logitech USB Receiver Consumer Control: device is a keyboard [ 20872.545] (II) event17 - Logitech USB Receiver Consumer Control: device removed [ 20872.557] (II) libinput: Logitech USB Receiver Consumer Control: needs a virtual subdevice [ 20872.557] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2.1/3-2.1:1.1/0003:046D:C548.0008/input/input17/event17" [ 20872.557] (II) XINPUT: Adding extended input device "Logitech USB Receiver Consumer Control" (type: MOUSE, id 20) [ 20872.557] (**) Option "AccelerationScheme" "none" [ 20872.557] (**) Logitech USB Receiver Consumer Control: (accel) selected scheme none/0 [ 20872.557] (**) Logitech USB Receiver Consumer Control: (accel) acceleration factor: 2.000 [ 20872.557] (**) Logitech USB Receiver Consumer Control: (accel) acceleration threshold: 4 [ 20872.557] (**) Logitech USB Receiver Consumer Control: Applying InputClass "libinput keyboard catchall" [ 20872.557] (**) Logitech USB Receiver Consumer Control: Applying InputClass "system-keyboard" [ 20872.557] (II) Using input driver 'libinput' for 'Logitech USB Receiver Consumer Control' [ 20872.557] (**) Logitech USB Receiver Consumer Control: always reports core events [ 20872.557] (**) Option "Device" "/dev/input/event17" [ 20872.557] (II) libinput: Logitech USB Receiver Consumer Control: is a virtual subdevice [ 20872.557] (EE) libinput: Logitech USB Receiver Consumer Control: Parent device not available [ 20872.558] (II) event17 - Logitech USB Receiver Consumer Control: is tagged by udev as: Keyboard [ 20872.558] (II) event17 - Logitech USB Receiver Consumer Control: device is a keyboard [ 20872.558] (II) event17 - Logitech USB Receiver Consumer Control: device removed [ 20872.567] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2.1/3-2.1:1.1/0003:046D:C548.0008/input/input17/event17" [ 20872.567] (II) XINPUT: Adding extended input device "Logitech USB Receiver Consumer Control" (type: KEYBOARD, id 33) [ 20872.567] (**) Option "xkb_model" "pc105+inet" [ 20872.567] (**) Option "xkb_layout" "us" [ 20872.567] (**) Option "xkb_options" "terminate:ctrl_alt_bksp" [ 20872.567] (II) config/udev: removing device Logitech USB Receiver Mouse [ 20872.567] (II) UnloadModule: "libinput" [ 20872.567] (II) config/udev: Adding input device Logitech USB Receiver Mouse (/dev/input/event16) [ 20872.567] (**) Logitech USB Receiver Mouse: Applying InputClass "libinput pointer catchall" [ 20872.567] (II) Using input driver 'libinput' for 'Logitech USB Receiver Mouse' [ 20872.567] (**) Logitech USB Receiver Mouse: always reports core events [ 20872.567] (**) Option "Device" "/dev/input/event16" [ 20872.568] (II) event16 - Logitech USB Receiver Mouse: is tagged by udev as: Mouse [ 20872.568] (II) event16 - Logitech USB Receiver Mouse: device set to 1000 DPI [ 20872.568] (II) event16 - Logitech USB Receiver Mouse: device is a pointer [ 20872.568] (II) event16 - Logitech USB Receiver Mouse: device removed [ 20872.583] (II) libinput: Logitech USB Receiver Mouse: Step value 0 was provided, libinput Fallback acceleration function is used. [ 20872.583] (II) libinput: Logitech USB Receiver Mouse: Step value 0 was provided, libinput Fallback acceleration function is used. [ 20872.583] (II) libinput: Logitech USB Receiver Mouse: Step value 0 was provided, libinput Fallback acceleration function is used. [ 20872.583] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2.1/3-2.1:1.1/0003:046D:C548.0008/input/input16/event16" [ 20872.583] (II) XINPUT: Adding extended input device "Logitech USB Receiver Mouse" (type: MOUSE, id 19) [ 20872.583] (**) Option "AccelerationScheme" "none" [ 20872.583] (**) Logitech USB Receiver Mouse: (accel) selected scheme none/0 [ 20872.583] (**) Logitech USB Receiver Mouse: (accel) acceleration factor: 2.000 [ 20872.583] (**) Logitech USB Receiver Mouse: (accel) acceleration threshold: 4 [ 20872.583] (II) config/udev: removing device Logitech Gaming Mouse G502 Keyboard [ 20872.583] (II) UnloadModule: "libinput" [ 20872.583] (II) config/udev: removing device Logitech Gaming Mouse G502 Keyboard [ 20872.583] (II) UnloadModule: "libinput" [ 20872.583] (II) config/udev: Adding input device Logitech Gaming Mouse G502 Keyboard (/dev/input/event22) [ 20872.583] (**) Logitech Gaming Mouse G502 Keyboard: Applying InputClass "libinput keyboard catchall" [ 20872.583] (**) Logitech Gaming Mouse G502 Keyboard: Applying InputClass "system-keyboard" [ 20872.583] (II) Using input driver 'libinput' for 'Logitech Gaming Mouse G502 Keyboard' [ 20872.583] (**) Logitech Gaming Mouse G502 Keyboard: always reports core events [ 20872.583] (**) Option "Device" "/dev/input/event22" [ 20872.584] (II) event22 - Logitech Gaming Mouse G502 Keyboard: is tagged by udev as: Keyboard [ 20872.584] (II) event22 - Logitech Gaming Mouse G502 Keyboard: device is a keyboard [ 20872.584] (II) event22 - Logitech Gaming Mouse G502 Keyboard: device removed [ 20872.600] (II) libinput: Logitech Gaming Mouse G502 Keyboard: needs a virtual subdevice [ 20872.600] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1.4/3-1.4:1.1/0003:046D:C332.000C/input/input22/event22" [ 20872.600] (II) XINPUT: Adding extended input device "Logitech Gaming Mouse G502 Keyboard" (type: MOUSE, id 17) [ 20872.600] (**) Option "AccelerationScheme" "none" [ 20872.600] (**) Logitech Gaming Mouse G502 Keyboard: (accel) selected scheme none/0 [ 20872.600] (**) Logitech Gaming Mouse G502 Keyboard: (accel) acceleration factor: 2.000 [ 20872.600] (**) Logitech Gaming Mouse G502 Keyboard: (accel) acceleration threshold: 4 [ 20872.600] (**) Logitech Gaming Mouse G502 Keyboard: Applying InputClass "libinput keyboard catchall" [ 20872.600] (**) Logitech Gaming Mouse G502 Keyboard: Applying InputClass "system-keyboard" [ 20872.600] (II) Using input driver 'libinput' for 'Logitech Gaming Mouse G502 Keyboard' [ 20872.600] (**) Logitech Gaming Mouse G502 Keyboard: always reports core events [ 20872.600] (**) Option "Device" "/dev/input/event22" [ 20872.600] (II) libinput: Logitech Gaming Mouse G502 Keyboard: is a virtual subdevice [ 20872.600] (EE) libinput: Logitech Gaming Mouse G502 Keyboard: Parent device not available [ 20872.600] (II) event22 - Logitech Gaming Mouse G502 Keyboard: is tagged by udev as: Keyboard [ 20872.600] (II) event22 - Logitech Gaming Mouse G502 Keyboard: device is a keyboard [ 20872.601] (II) event22 - Logitech Gaming Mouse G502 Keyboard: device removed [ 20872.617] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1.4/3-1.4:1.1/0003:046D:C332.000C/input/input22/event22" [ 20872.617] (II) XINPUT: Adding extended input device "Logitech Gaming Mouse G502 Keyboard" (type: KEYBOARD, id 32) [ 20872.617] (**) Option "xkb_model" "pc105+inet" [ 20872.617] (**) Option "xkb_layout" "us" [ 20872.617] (**) Option "xkb_options" "terminate:ctrl_alt_bksp" [ 20872.617] (II) config/udev: Adding input device SYNA2BA6:00 06CB:CE78 Mouse (/dev/input/mouse4) [ 20872.617] (II) No input driver specified, ignoring this device. [ 20872.617] (II) This device may have been added with another device file. [ 20872.617] (II) config/udev: removing device Logitech Gaming Mouse G502 [ 20872.617] (II) UnloadModule: "libinput" [ 20872.617] (II) config/udev: Adding input device Logitech Gaming Mouse G502 (/dev/input/event21) [ 20872.617] (**) Logitech Gaming Mouse G502: Applying InputClass "libinput pointer catchall" [ 20872.617] (II) Using input driver 'libinput' for 'Logitech Gaming Mouse G502' [ 20872.617] (**) Logitech Gaming Mouse G502: always reports core events [ 20872.617] (**) Option "Device" "/dev/input/event21" [ 20872.618] (II) event21 - Logitech Gaming Mouse G502: is tagged by udev as: Mouse [ 20872.618] (II) event21 - Logitech Gaming Mouse G502: device set to 2400 DPI [ 20872.618] (II) event21 - Logitech Gaming Mouse G502: device is a pointer [ 20872.618] (II) event21 - Logitech Gaming Mouse G502: device removed [ 20872.633] (II) libinput: Logitech Gaming Mouse G502: Step value 0 was provided, libinput Fallback acceleration function is used. [ 20872.633] (II) libinput: Logitech Gaming Mouse G502: Step value 0 was provided, libinput Fallback acceleration function is used. [ 20872.633] (II) libinput: Logitech Gaming Mouse G502: Step value 0 was provided, libinput Fallback acceleration function is used. [ 20872.633] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1.4/3-1.4:1.0/0003:046D:C332.000B/input/input21/event21" [ 20872.633] (II) XINPUT: Adding extended input device "Logitech Gaming Mouse G502" (type: MOUSE, id 16) [ 20872.633] (**) Option "AccelerationScheme" "none" [ 20872.633] (**) Logitech Gaming Mouse G502: (accel) selected scheme none/0 [ 20872.633] (**) Logitech Gaming Mouse G502: (accel) acceleration factor: 2.000 [ 20872.633] (**) Logitech Gaming Mouse G502: (accel) acceleration threshold: 4 [ 20872.633] (II) config/udev: removing device ITE Tech. Inc. ITE Device(8910) Wireless Radio Control [ 20872.633] (II) UnloadModule: "libinput" [ 20872.633] (II) config/udev: Adding input device ITE Tech. Inc. ITE Device(8910) Wireless Radio Control (/dev/input/event8) [ 20872.633] (**) ITE Tech. Inc. ITE Device(8910) Wireless Radio Control: Applying InputClass "libinput keyboard catchall" [ 20872.633] (**) ITE Tech. Inc. ITE Device(8910) Wireless Radio Control: Applying InputClass "system-keyboard" [ 20872.633] (II) Using input driver 'libinput' for 'ITE Tech. Inc. ITE Device(8910) Wireless Radio Control' [ 20872.633] (**) ITE Tech. Inc. ITE Device(8910) Wireless Radio Control: always reports core events [ 20872.633] (**) Option "Device" "/dev/input/event8" [ 20872.634] (II) event8 - ITE Tech. Inc. ITE Device(8910) Wireless Radio Control: is tagged by udev as: Keyboard [ 20872.634] (II) event8 - ITE Tech. Inc. ITE Device(8910) Wireless Radio Control: device is a keyboard [ 20872.634] (II) event8 - ITE Tech. Inc. ITE Device(8910) Wireless Radio Control: device removed [ 20872.657] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-5/3-5:1.0/0003:048D:C102.0002/input/input8/event8" [ 20872.657] (II) XINPUT: Adding extended input device "ITE Tech. Inc. ITE Device(8910) Wireless Radio Control" (type: KEYBOARD, id 24) [ 20872.657] (**) Option "xkb_model" "pc105+inet" [ 20872.657] (**) Option "xkb_layout" "us" [ 20872.657] (**) Option "xkb_options" "terminate:ctrl_alt_bksp" [ 20872.657] (II) config/udev: removing device Ideapad extra buttons [ 20872.657] (II) UnloadModule: "libinput" [ 20872.657] (II) config/udev: Adding input device Ideapad extra buttons (/dev/input/event25) [ 20872.657] (**) Ideapad extra buttons: Applying InputClass "libinput keyboard catchall" [ 20872.657] (**) Ideapad extra buttons: Applying InputClass "system-keyboard" [ 20872.657] (II) Using input driver 'libinput' for 'Ideapad extra buttons' [ 20872.657] (**) Ideapad extra buttons: always reports core events [ 20872.657] (**) Option "Device" "/dev/input/event25" [ 20872.657] (II) event25 - Ideapad extra buttons: is tagged by udev as: Keyboard [ 20872.657] (II) event25 - Ideapad extra buttons: device is a keyboard [ 20872.658] (II) event25 - Ideapad extra buttons: device removed [ 20872.678] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1f.0/PNP0C09:00/VPC2004:00/input/input28/event25" [ 20872.678] (II) XINPUT: Adding extended input device "Ideapad extra buttons" (type: KEYBOARD, id 28) [ 20872.678] (**) Option "xkb_model" "pc105+inet" [ 20872.678] (**) Option "xkb_layout" "us" [ 20872.678] (**) Option "xkb_options" "terminate:ctrl_alt_bksp" [ 20872.678] (II) config/udev: removing device ITE Tech. Inc. ITE Device(8295) Keyboard [ 20872.678] (II) UnloadModule: "libinput" [ 20872.678] (II) config/udev: Adding input device ITE Tech. Inc. ITE Device(8295) Keyboard (/dev/input/event23) [ 20872.678] (**) ITE Tech. Inc. ITE Device(8295) Keyboard: Applying InputClass "libinput keyboard catchall" [ 20872.678] (**) ITE Tech. Inc. ITE Device(8295) Keyboard: Applying InputClass "system-keyboard" [ 20872.678] (II) Using input driver 'libinput' for 'ITE Tech. Inc. ITE Device(8295) Keyboard' [ 20872.678] (**) ITE Tech. Inc. ITE Device(8295) Keyboard: always reports core events [ 20872.678] (**) Option "Device" "/dev/input/event23" [ 20872.679] (II) event23 - ITE Tech. Inc. ITE Device(8295) Keyboard: is tagged by udev as: Keyboard [ 20872.679] (II) event23 - ITE Tech. Inc. ITE Device(8295) Keyboard: device is a keyboard [ 20872.679] (II) event23 - ITE Tech. Inc. ITE Device(8295) Keyboard: device removed [ 20872.697] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9:1.0/0003:048D:C975.000D/input/input25/event23" [ 20872.697] (II) XINPUT: Adding extended input device "ITE Tech. Inc. ITE Device(8295) Keyboard" (type: KEYBOARD, id 25) [ 20872.697] (**) Option "xkb_model" "pc105+inet" [ 20872.697] (**) Option "xkb_layout" "us" [ 20872.697] (**) Option "xkb_options" "terminate:ctrl_alt_bksp" [ 20872.697] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=9 (/dev/input/event257) [ 20872.697] (II) No input driver specified, ignoring this device. [ 20872.697] (II) This device may have been added with another device file. [ 20872.697] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event30) [ 20872.697] (II) No input driver specified, ignoring this device. [ 20872.697] (II) This device may have been added with another device file. [ 20872.697] (II) config/udev: removing device SYNA2BA6:00 06CB:CE78 Mouse [ 20872.697] (II) UnloadModule: "libinput" [ 20872.697] (II) config/udev: Adding input device SYNA2BA6:00 06CB:CE78 Mouse (/dev/input/event26) [ 20872.697] (**) SYNA2BA6:00 06CB:CE78 Mouse: Applying InputClass "libinput pointer catchall" [ 20872.697] (II) Using input driver 'libinput' for 'SYNA2BA6:00 06CB:CE78 Mouse' [ 20872.697] (**) SYNA2BA6:00 06CB:CE78 Mouse: always reports core events [ 20872.697] (**) Option "Device" "/dev/input/event26" [ 20872.698] (II) event26 - SYNA2BA6:00 06CB:CE78 Mouse: is tagged by udev as: Mouse Pointingstick [ 20872.698] (II) event26 - SYNA2BA6:00 06CB:CE78 Mouse: device is a pointer [ 20872.698] (II) event26 - SYNA2BA6:00 06CB:CE78 Mouse: device removed [ 20872.716] (II) libinput: SYNA2BA6:00 06CB:CE78 Mouse: Step value 0 was provided, libinput Fallback acceleration function is used. [ 20872.716] (II) libinput: SYNA2BA6:00 06CB:CE78 Mouse: Step value 0 was provided, libinput Fallback acceleration function is used. [ 20872.716] (II) libinput: SYNA2BA6:00 06CB:CE78 Mouse: Step value 0 was provided, libinput Fallback acceleration function is used. [ 20872.716] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-14/i2c-SYNA2BA6:00/0018:06CB:CE78.000F/input/input29/event26" [ 20872.716] (II) XINPUT: Adding extended input device "SYNA2BA6:00 06CB:CE78 Mouse" (type: MOUSE, id 26) [ 20872.716] (**) Option "AccelerationScheme" "none" [ 20872.716] (**) SYNA2BA6:00 06CB:CE78 Mouse: (accel) selected scheme none/0 [ 20872.716] (**) SYNA2BA6:00 06CB:CE78 Mouse: (accel) acceleration factor: 2.000 [ 20872.716] (**) SYNA2BA6:00 06CB:CE78 Mouse: (accel) acceleration threshold: 4 [ 20872.716] (II) config/udev: Adding input device HOLTEK USB-HID Keyboard (/dev/input/event13) [ 20872.716] (II) No input driver specified, ignoring this device. [ 20872.716] (II) This device may have been added with another device file. [ 20872.716] (II) config/udev: removing device AT Translated Set 2 keyboard [ 20872.716] (II) UnloadModule: "libinput" [ 20872.716] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3) [ 20872.716] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall" [ 20872.716] (**) AT Translated Set 2 keyboard: Applying InputClass "system-keyboard" [ 20872.716] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard' [ 20872.716] (**) AT Translated Set 2 keyboard: always reports core events [ 20872.716] (**) Option "Device" "/dev/input/event3" [ 20872.717] (II) event3 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard [ 20872.717] (II) event3 - AT Translated Set 2 keyboard: device is a keyboard [ 20872.717] (II) event3 - AT Translated Set 2 keyboard: device removed [ 20872.741] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input3/event3" [ 20872.741] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 29) [ 20872.741] (**) Option "xkb_model" "pc105+inet" [ 20872.741] (**) Option "xkb_layout" "us" [ 20872.741] (**) Option "xkb_options" "terminate:ctrl_alt_bksp" [ 20872.741] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event19) [ 20872.741] (II) No input driver specified, ignoring this device. [ 20872.741] (II) This device may have been added with another device file. [ 20872.741] (II) config/udev: removing device Logitech USB Receiver [ 20872.741] (II) UnloadModule: "libinput" [ 20872.742] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event20) [ 20872.742] (**) Logitech USB Receiver: Applying InputClass "libinput touchpad catchall" [ 20872.742] (II) Using input driver 'libinput' for 'Logitech USB Receiver' [ 20872.742] (**) Logitech USB Receiver: always reports core events [ 20872.742] (**) Option "Device" "/dev/input/event20" [ 20872.742] (II) event20 - Logitech USB Receiver: is tagged by udev as: Touchpad [ 20872.743] (II) event20 - Logitech USB Receiver: device is a touchpad [ 20872.743] (II) event20 - Logitech USB Receiver: device removed [ 20872.766] (II) libinput: Logitech USB Receiver: Step value 0 was provided, libinput Fallback acceleration function is used. [ 20872.766] (II) libinput: Logitech USB Receiver: Step value 0 was provided, libinput Fallback acceleration function is used. [ 20872.766] (II) libinput: Logitech USB Receiver: Step value 0 was provided, libinput Fallback acceleration function is used. [ 20872.766] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2.1/3-2.1:1.3/0003:046D:C548.000A/input/input26/event20" [ 20872.766] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: TOUCHPAD, id 22) [ 20872.767] (**) Option "AccelerationScheme" "none" [ 20872.767] (**) Logitech USB Receiver: (accel) selected scheme none/0 [ 20872.767] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000 [ 20872.767] (**) Logitech USB Receiver: (accel) acceleration threshold: 4 [ 20872.768] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event28) [ 20872.768] (II) No input driver specified, ignoring this device. [ 20872.768] (II) This device may have been added with another device file. [ 20872.768] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=8 (/dev/input/event256) [ 20872.768] (II) No input driver specified, ignoring this device. [ 20872.768] (II) This device may have been added with another device file. [ 20872.768] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event29) [ 20872.768] (II) No input driver specified, ignoring this device. [ 20872.768] (II) This device may have been added with another device file. [ 20872.768] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event31) [ 20872.768] (II) No input driver specified, ignoring this device. [ 20872.768] (II) This device may have been added with another device file. [ 20872.768] (II) config/udev: removing device LogiOps Virtual Input [ 20872.768] (II) UnloadModule: "libinput" [ 20872.768] (II) config/udev: Adding input device LogiOps Virtual Input (/dev/input/event262) [ 20872.768] (**) LogiOps Virtual Input: Applying InputClass "libinput keyboard catchall" [ 20872.768] (**) LogiOps Virtual Input: Applying InputClass "system-keyboard" [ 20872.768] (II) Using input driver 'libinput' for 'LogiOps Virtual Input' [ 20872.768] (**) LogiOps Virtual Input: always reports core events [ 20872.768] (**) Option "Device" "/dev/input/event262" [ 20872.769] (II) event262 - LogiOps Virtual Input: is tagged by udev as: Keyboard [ 20872.769] (II) event262 - LogiOps Virtual Input: device is a keyboard [ 20872.769] (II) event262 - LogiOps Virtual Input: device removed [ 20872.785] (**) Option "config_info" "udev:/sys/devices/virtual/input/input42/event262" [ 20872.785] (II) XINPUT: Adding extended input device "LogiOps Virtual Input" (type: KEYBOARD, id 30) [ 20872.785] (**) Option "xkb_model" "pc105+inet" [ 20872.785] (**) Option "xkb_layout" "us" [ 20872.785] (**) Option "xkb_options" "terminate:ctrl_alt_bksp" [ 20872.785] (II) config/udev: removing device SYNA2BA6:00 06CB:CE78 Touchpad [ 20872.785] (II) UnloadModule: "libinput" [ 20872.785] (II) config/udev: Adding input device SYNA2BA6:00 06CB:CE78 Touchpad (/dev/input/event27) [ 20872.785] (**) SYNA2BA6:00 06CB:CE78 Touchpad: Applying InputClass "libinput touchpad catchall" [ 20872.785] (II) Using input driver 'libinput' for 'SYNA2BA6:00 06CB:CE78 Touchpad' [ 20872.785] (**) SYNA2BA6:00 06CB:CE78 Touchpad: always reports core events [ 20872.785] (**) Option "Device" "/dev/input/event27" [ 20872.786] (II) event27 - SYNA2BA6:00 06CB:CE78 Touchpad: is tagged by udev as: Touchpad [ 20872.787] (II) event27 - SYNA2BA6:00 06CB:CE78 Touchpad: device is a touchpad [ 20872.787] (II) event27 - SYNA2BA6:00 06CB:CE78 Touchpad: device removed [ 20872.809] (II) libinput: SYNA2BA6:00 06CB:CE78 Touchpad: Step value 0 was provided, libinput Fallback acceleration function is used. [ 20872.809] (II) libinput: SYNA2BA6:00 06CB:CE78 Touchpad: Step value 0 was provided, libinput Fallback acceleration function is used. [ 20872.809] (II) libinput: SYNA2BA6:00 06CB:CE78 Touchpad: Step value 0 was provided, libinput Fallback acceleration function is used. [ 20872.809] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-14/i2c-SYNA2BA6:00/0018:06CB:CE78.000F/input/input30/event27" [ 20872.809] (II) XINPUT: Adding extended input device "SYNA2BA6:00 06CB:CE78 Touchpad" (type: TOUCHPAD, id 27) [ 20872.811] (**) Option "AccelerationScheme" "none" [ 20872.811] (**) SYNA2BA6:00 06CB:CE78 Touchpad: (accel) selected scheme none/0 [ 20872.811] (**) SYNA2BA6:00 06CB:CE78 Touchpad: (accel) acceleration factor: 2.000 [ 20872.811] (**) SYNA2BA6:00 06CB:CE78 Touchpad: (accel) acceleration threshold: 4 [ 20872.812] (II) config/udev: Adding input device PC Speaker (/dev/input/event24) [ 20872.812] (II) No input driver specified, ignoring this device. [ 20872.812] (II) This device may have been added with another device file.