/dev/sda smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.10.74-generic-2rosa2021.1-x86_64] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: TOSHIBA-TR200 Serial Number: -- LU WWN Device Id: 5 8ce38e ... Firmware Version: SBFA13.3 User Capacity: 480,103,981,056 bytes [480 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Form Factor: 2.5 inches TRIM Command: Available Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ACS-4 (minor revision not indicated) SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Sat Jan 22 19:14:39 2022 MSK SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Unavailable === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Total time to complete Offline data collection: ( 30) seconds. Offline data collection capabilities: (0x00) Offline data collection not supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 9 Power_On_Hours -O--C- 100 100 000 - 10318 12 Power_Cycle_Count -O--C- 100 100 000 - 3057 167 Unknown_Attribute -O---K 100 100 000 - 0 168 Unknown_Attribute -O--C- 100 100 000 - 0 169 Unknown_Attribute PO---- 100 100 010 - 0 173 Unknown_Attribute -O--C- 185 185 000 - 0 192 Power-Off_Retract_Count -O--C- 100 100 000 - 1281 194 Temperature_Celsius PO---K 071 064 020 - 29 (Min/Max 18/36) 241 Total_LBAs_Written -O--CK 100 100 000 - 253035 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 51 Comprehensive SMART error log 0x03 GPL R/O 64 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 8 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log SMART Extended Comprehensive Error Log Version: 1 (64 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] Selective Self-tests/Logging not supported SCT Commands not supported Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 3057 --- Lifetime Power-On Resets 0x01 0x010 4 10318 --- Power-on Hours 0x01 0x018 6 16582952295 --- Logical Sectors Written 0x01 0x028 6 16018692278 --- Logical Sectors Read 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors 0x05 ===== = = === == Temperature Statistics (rev 1) == 0x05 0x008 1 29 --- Current Temperature 0x05 0x020 1 36 --- Highest Temperature 0x05 0x028 1 18 --- Lowest Temperature 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x018 4 8 --- Number of Interface CRC Errors 0x07 ===== = = === == Solid State Device Statistics (rev 1) == 0x07 0x008 1 3 --- Percentage Used Endurance Indicator |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 4 4 Transition from drive PhyRdy to drive PhyNRdy 0x000a 4 5 Device-to-host register FISes sent due to a COMRESET 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC /dev/sdb smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.10.74-generic-2rosa2021.1-x86_64] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: Apacer AS350 240GB Serial Number: -- LU WWN Device Id: 0 000000 ... Firmware Version: AP612PE0 User Capacity: 240,057,409,536 bytes [240 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Form Factor: 2.5 inches TRIM Command: Available Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ACS-4 (minor revision not indicated) SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Sat Jan 22 19:14:39 2022 MSK SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Unavailable === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (65535) seconds. Offline data collection capabilities: (0x79) SMART execute Offline immediate. No Auto Offline data collection support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 30) minutes. Conveyance self-test routine recommended polling time: ( 6) minutes. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 9 Power_On_Hours -O--CK 100 100 000 - 11608 12 Power_Cycle_Count -O--CK 100 100 000 - 2349 163 Unknown_Attribute -O--CK 100 100 000 - 171 164 Unknown_Attribute -O--CK 100 100 000 - 129 166 Unknown_Attribute -O--CK 100 100 000 - 0 167 Unknown_Attribute -O--CK 100 100 000 - 0 168 Unknown_Attribute -O--CK 100 100 000 - 0 171 Unknown_Attribute -O--CK 100 100 000 - 0 172 Unknown_Attribute -O--CK 100 100 000 - 0 175 Program_Fail_Count_Chip -O--CK 100 100 000 - 0 192 Power-Off_Retract_Count -O--CK 100 100 000 - 386 194 Temperature_Celsius -O---K 067 067 030 - 33 (Min/Max 33/33) 231 Unknown_SSD_Attribute -O--C- 100 100 000 - 87 241 Total_LBAs_Written -O--CK 100 100 000 - 76195641810 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 51 Comprehensive SMART error log 0x03 GPL R/O 64 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 8 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log SMART Extended Comprehensive Error Log Version: 1 (64 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed without error 00% 10508 - # 2 Extended offline Completed without error 00% 9440 - # 3 Extended offline Completed without error 00% 9439 - # 4 Extended offline Completed without error 00% 8700 - SMART Selective self-test log data structure revision number 0 Note: revision number not 1 implies that no selective self-test has ever been run SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Commands not supported Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 2349 --- Lifetime Power-On Resets 0x01 0x010 4 11608 --- Power-on Hours 0x01 0x018 6 76195641810 --- Logical Sectors Written 0x01 0x028 6 73686502222 --- Logical Sectors Read 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors 0x05 ===== = = === == Temperature Statistics (rev 1) == 0x05 0x008 1 33 --- Current Temperature 0x05 0x020 1 33 --- Highest Temperature 0x05 0x028 1 33 --- Lowest Temperature 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x018 4 0 --- Number of Interface CRC Errors 0x07 ===== = = === == Solid State Device Statistics (rev 1) == 0x07 0x008 1 12 --- Percentage Used Endurance Indicator |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 4 4 Transition from drive PhyRdy to drive PhyNRdy 0x000a 4 5 Device-to-host register FISes sent due to a COMRESET 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC /dev/sdg smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.10.74-generic-2rosa2021.1-x86_64] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Seagate Momentus 5400.6 Device Model: ST9320325AS Serial Number: -- LU WWN Device Id: 5 000c50 ... Firmware Version: 0002BSM1 User Capacity: 320,072,933,376 bytes [320 GB] Sector Size: 512 bytes logical/physical Rotation Rate: 5400 rpm Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 2.6, 1.5 Gb/s Local Time is: Sat Jan 22 19:14:39 2022 MSK SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 128 (minimum power consumption without standby) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Unknown === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x73) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 101) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x103b) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 118 088 006 - 194570380 3 Spin_Up_Time PO---- 099 098 000 - 0 4 Start_Stop_Count -O--CK 099 099 020 - 1045 5 Reallocated_Sector_Ct PO--CK 100 100 036 - 5 7 Seek_Error_Rate POSR-- 069 060 030 - 7477840 9 Power_On_Hours -O--CK 098 098 000 - 2211 10 Spin_Retry_Count PO--C- 100 100 097 - 0 12 Power_Cycle_Count -O--CK 100 037 020 - 513 184 End-to-End_Error -O--CK 100 100 099 - 0 187 Reported_Uncorrect -O--CK 083 083 000 - 17 188 Command_Timeout -O--CK 100 097 000 - 21475164184 189 High_Fly_Writes -O-RCK 100 100 000 - 0 190 Airflow_Temperature_Cel -O---K 080 051 045 - 20 (Min/Max 19/20) 191 G-Sense_Error_Rate -O--CK 100 100 000 - 1 192 Power-Off_Retract_Count -O--CK 100 100 000 - 166 193 Load_Cycle_Count -O--CK 093 093 000 - 14379 194 Temperature_Celsius -O---K 020 049 000 - 20 (0 13 0 0 0) 195 Hardware_ECC_Recovered -O-RC- 062 059 000 - 194570380 197 Current_Pending_Sector -O--C- 100 100 000 - 0 198 Offline_Uncorrectable ----C- 100 100 000 - 0 199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 GPL,SL R/O 1 Summary SMART error log 0x02 GPL,SL R/O 5 Comprehensive SMART error log 0x03 GPL,SL R/O 5 Ext. Comprehensive SMART error log 0x06 GPL,SL R/O 1 SMART self-test log 0x07 GPL,SL R/O 1 Extended self-test log 0x09 GPL,SL R/W 1 Selective self-test log 0x10 GPL,SL R/O 1 NCQ Command Error log 0x11 GPL,SL R/O 1 SATA Phy Event Counters log 0x21 GPL,SL R/O 1 Write stream error log 0x22 GPL,SL R/O 1 Read stream error log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa1 GPL,SL VS 20 Device vendor specific log 0xa2 GPL VS 2248 Device vendor specific log 0xa8 GPL,SL VS 65 Device vendor specific log 0xa9 GPL,SL VS 1 Device vendor specific log 0xb0 GPL VS 2864 Device vendor specific log 0xbe-0xbf GPL VS 65535 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (5 sectors) Device Error Count: 16 CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 16 [15] occurred at disk power-on lifetime: 669 hours (27 days + 21 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 00 54 56 5c 00 00 Error: UNC at LBA = 0x0054565c = 5527132 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 da 00 08 00 00 00 54 56 57 40 00 00:17:52.672 READ DMA EXT 25 00 da 00 08 00 00 00 54 57 97 40 00 00:17:52.666 READ DMA EXT 25 00 da 00 08 00 00 00 54 57 8f 40 00 00:17:52.521 READ DMA EXT 25 00 da 00 08 00 00 00 54 56 57 40 00 00:17:50.195 READ DMA EXT 25 00 da 00 08 00 00 00 54 56 57 40 00 00:17:47.766 READ DMA EXT Error 15 [14] occurred at disk power-on lifetime: 669 hours (27 days + 21 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 00 54 56 5c 00 00 Error: UNC at LBA = 0x0054565c = 5527132 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 da 00 08 00 00 00 54 56 57 40 00 00:17:50.195 READ DMA EXT 25 00 da 00 08 00 00 00 54 56 57 40 00 00:17:47.766 READ DMA EXT 25 00 da 00 08 00 00 00 54 56 57 40 00 00:17:45.514 READ DMA EXT 25 00 da 00 08 00 00 00 54 56 4f 40 00 00:17:45.511 READ DMA EXT 25 00 da 00 08 00 00 00 54 56 47 40 00 00:17:45.511 READ DMA EXT Error 14 [13] occurred at disk power-on lifetime: 669 hours (27 days + 21 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 00 54 56 5c 00 00 Error: UNC at LBA = 0x0054565c = 5527132 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 da 00 08 00 00 00 54 56 57 40 00 00:17:47.766 READ DMA EXT 25 00 da 00 08 00 00 00 54 56 57 40 00 00:17:45.514 READ DMA EXT 25 00 da 00 08 00 00 00 54 56 4f 40 00 00:17:45.511 READ DMA EXT 25 00 da 00 08 00 00 00 54 56 47 40 00 00:17:45.511 READ DMA EXT 25 00 da 00 08 00 00 00 54 56 3f 40 00 00:17:45.510 READ DMA EXT Error 13 [12] occurred at disk power-on lifetime: 669 hours (27 days + 21 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 00 54 56 5c 00 00 Error: UNC at LBA = 0x0054565c = 5527132 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 da 00 08 00 00 00 54 56 57 40 00 00:17:45.514 READ DMA EXT 25 00 da 00 08 00 00 00 54 56 4f 40 00 00:17:45.511 READ DMA EXT 25 00 da 00 08 00 00 00 54 56 47 40 00 00:17:45.511 READ DMA EXT 25 00 da 00 08 00 00 00 54 56 3f 40 00 00:17:45.510 READ DMA EXT 25 00 da 00 08 00 00 00 54 56 37 40 00 00:17:45.509 READ DMA EXT Error 12 [11] occurred at disk power-on lifetime: 669 hours (27 days + 21 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 00 54 56 5c 00 00 Error: UNC at LBA = 0x0054565c = 5527132 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 da 00 10 00 00 00 54 45 7f 40 00 00:17:42.949 READ DMA EXT 25 00 da 00 10 00 00 00 54 3f 7f 40 00 00:17:42.606 READ DMA EXT 25 00 da 00 10 00 00 00 54 39 7f 40 00 00:17:42.264 READ DMA EXT 25 00 da 00 10 00 00 00 52 c5 7f 40 00 00:17:39.993 READ DMA EXT 25 00 da 00 f0 00 00 00 52 c4 8f 40 00 00:17:39.988 READ DMA EXT Error 11 [10] occurred at disk power-on lifetime: 429 hours (17 days + 21 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 00 58 a2 99 00 00 Error: UNC at LBA = 0x0058a299 = 5808793 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 d5 00 80 00 00 00 58 a2 67 40 00 00:48:27.234 READ DMA EXT 25 00 d5 00 80 00 00 00 58 a1 e7 40 00 00:48:27.231 READ DMA EXT 25 00 d5 00 80 00 00 00 58 a1 67 40 00 00:48:27.229 READ DMA EXT 25 00 d5 00 80 00 00 00 58 a0 e7 40 00 00:48:27.227 READ DMA EXT 25 00 d5 00 80 00 00 00 58 a0 67 40 00 00:48:27.225 READ DMA EXT Error 10 [9] occurred at disk power-on lifetime: 411 hours (17 days + 3 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 00 58 a2 99 00 00 Error: UNC at LBA = 0x0058a299 = 5808793 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 d5 00 08 00 00 00 58 a2 97 40 00 00:03:03.648 READ DMA EXT 25 00 d5 00 08 00 00 01 fb d0 a7 40 00 00:03:03.551 READ DMA EXT 25 00 d5 00 08 00 00 00 58 a2 67 40 00 00:03:03.535 READ DMA EXT 25 00 d5 00 08 00 00 01 fb b8 cf 40 00 00:03:03.525 READ DMA EXT 25 00 d5 00 08 00 00 00 58 a2 df 40 00 00:03:03.523 READ DMA EXT Error 9 [8] occurred at disk power-on lifetime: 411 hours (17 days + 3 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 00 58 a2 99 00 00 Error: UNC at LBA = 0x0058a299 = 5808793 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 d5 00 08 00 00 00 58 a2 97 40 00 00:03:01.019 READ DMA EXT 25 00 d5 00 08 00 00 00 60 06 67 40 00 00:03:01.017 READ DMA EXT 25 00 d5 00 08 00 00 00 58 a2 8f 40 00 00:03:01.016 READ DMA EXT 25 00 d5 00 08 00 00 00 60 06 57 40 00 00:03:01.014 READ DMA EXT 25 00 d5 00 08 00 00 00 58 a2 87 40 00 00:03:01.013 READ DMA EXT SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 16 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 522 (0x020a) Device State: Active (0) Current Temperature: 19 Celsius Power Cycle Min/Max Temperature: 19/19 Celsius Lifetime Min/Max Temperature: 13/50 Celsius Under/Over Temperature Limit Count: 0/1 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/ 0 Celsius Min/Max Temperature Limit: 0/ 0 Celsius Temperature History Size (Index): 128 (62) Index Estimated Time Temperature Celsius 63 2022-01-22 17:07 38 ******************* ... ..( 5 skipped). .. ******************* 69 2022-01-22 17:13 38 ******************* 70 2022-01-22 17:14 39 ******************** ... ..( 6 skipped). .. ******************** 77 2022-01-22 17:21 39 ******************** 78 2022-01-22 17:22 38 ******************* ... ..( 10 skipped). .. ******************* 89 2022-01-22 17:33 38 ******************* 90 2022-01-22 17:34 39 ******************** ... ..( 16 skipped). .. ******************** 107 2022-01-22 17:51 39 ******************** 108 2022-01-22 17:52 ? - 109 2022-01-22 17:53 18 - 110 2022-01-22 17:54 19 - 111 2022-01-22 17:55 24 ***** 112 2022-01-22 17:56 ? - 113 2022-01-22 17:57 24 ***** 114 2022-01-22 17:58 ? - 115 2022-01-22 17:59 17 - 116 2022-01-22 18:00 18 - 117 2022-01-22 18:01 19 - 118 2022-01-22 18:02 20 * 119 2022-01-22 18:03 23 **** 120 2022-01-22 18:04 24 ***** 121 2022-01-22 18:05 25 ****** 122 2022-01-22 18:06 25 ****** 123 2022-01-22 18:07 26 ******* 124 2022-01-22 18:08 27 ******** 125 2022-01-22 18:09 27 ******** 126 2022-01-22 18:10 27 ******** 127 2022-01-22 18:11 28 ********* 0 2022-01-22 18:12 28 ********* 1 2022-01-22 18:13 29 ********** 2 2022-01-22 18:14 29 ********** 3 2022-01-22 18:15 28 ********* 4 2022-01-22 18:16 28 ********* 5 2022-01-22 18:17 28 ********* 6 2022-01-22 18:18 27 ******** 7 2022-01-22 18:19 ? - 8 2022-01-22 18:20 21 ** 9 2022-01-22 18:21 22 *** 10 2022-01-22 18:22 23 **** 11 2022-01-22 18:23 24 ***** 12 2022-01-22 18:24 25 ****** 13 2022-01-22 18:25 26 ******* 14 2022-01-22 18:26 26 ******* 15 2022-01-22 18:27 27 ******** 16 2022-01-22 18:28 28 ********* 17 2022-01-22 18:29 28 ********* 18 2022-01-22 18:30 ? - 19 2022-01-22 18:31 20 * 20 2022-01-22 18:32 21 ** 21 2022-01-22 18:33 22 *** 22 2022-01-22 18:34 23 **** 23 2022-01-22 18:35 24 ***** 24 2022-01-22 18:36 25 ****** 25 2022-01-22 18:37 26 ******* 26 2022-01-22 18:38 27 ******** 27 2022-01-22 18:39 27 ******** 28 2022-01-22 18:40 28 ********* 29 2022-01-22 18:41 29 ********** 30 2022-01-22 18:42 ? - 31 2022-01-22 18:43 23 **** 32 2022-01-22 18:44 24 ***** 33 2022-01-22 18:45 25 ****** 34 2022-01-22 18:46 25 ****** 35 2022-01-22 18:47 26 ******* ... ..( 3 skipped). .. ******* 39 2022-01-22 18:51 26 ******* 40 2022-01-22 18:52 27 ******** 41 2022-01-22 18:53 27 ******** 42 2022-01-22 18:54 28 ********* 43 2022-01-22 18:55 29 ********** 44 2022-01-22 18:56 29 ********** 45 2022-01-22 18:57 30 *********** ... ..( 2 skipped). .. *********** 48 2022-01-22 19:00 30 *********** 49 2022-01-22 19:01 ? - 50 2022-01-22 19:02 23 **** 51 2022-01-22 19:03 23 **** 52 2022-01-22 19:04 24 ***** 53 2022-01-22 19:05 25 ****** 54 2022-01-22 19:06 26 ******* 55 2022-01-22 19:07 27 ******** 56 2022-01-22 19:08 27 ******** 57 2022-01-22 19:09 28 ********* 58 2022-01-22 19:10 ? - 59 2022-01-22 19:11 23 **** 60 2022-01-22 19:12 23 **** 61 2022-01-22 19:13 ? - 62 2022-01-22 19:14 19 - SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x000a 2 1 Device-to-host register FISes sent due to a COMRESET 0x0001 2 0 Command failed due to ICRC error 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS