/dev/nvme0n1 smartctl 7.2 2020-12-30 r5155 [x86_64-linux-6.2.6-76060206-generic] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Number: WD_BLACK SN770 1TB Serial Number: -- Firmware Version: 731100WD PCI Vendor/Subsystem ID: 0x15b7 IEEE OUI Identifier: 0x001b44 Total NVM Capacity: 1,000,204,886,016 [1.00 TB] Unallocated NVM Capacity: 0 Controller ID: 0 NVMe Version: 1.4 Number of Namespaces: 1 Namespace 1 Size/Capacity: 1,000,204,886,016 [1.00 TB] Namespace 1 Formatted LBA Size: 512 Namespace 1 IEEE EUI-64: 001b44 ... Local Time is: Sat May 13 23:56:17 2023 CDT Firmware Updates (0x14): 2 Slots, no Reset required Optional Admin Commands (0x0017): Security Format Frmw_DL Self_Test Optional NVM Commands (0x00df): Comp Wr_Unc DS_Mngmt Wr_Zero Sav/Sel_Feat Timestmp Verify Log Page Attributes (0x7e): Cmd_Eff_Lg Ext_Get_Lg Telmtry_Lg Pers_Ev_Lg *Other* Maximum Data Transfer Size: 256 Pages Warning Comp. Temp. Threshold: 84 Celsius Critical Comp. Temp. Threshold: 88 Celsius Namespace 1 Features (0x02): NA_Fields Supported Power States St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat 0 + 5.00W 5.00W - 0 0 0 0 0 0 1 + 3.30W 3.00W - 0 0 0 0 0 0 2 + 2.20W 2.00W - 0 0 0 0 0 0 3 - 0.0150W - - 3 3 3 3 1500 2500 4 - 0.0050W - - 4 4 4 4 10000 6000 5 - 0.0033W - - 5 5 5 5 176000 25000 Supported LBA Sizes (NSID 0x1) Id Fmt Data Metadt Rel_Perf 0 + 512 0 2 1 - 4096 0 1 === START OF SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED SMART/Health Information (NVMe Log 0x02) Critical Warning: 0x00 Temperature: 30 Celsius Available Spare: 100% Available Spare Threshold: 10% Percentage Used: 0% Data Units Read: 76,044 [38.9 GB] Data Units Written: 649,591 [332 GB] Host Read Commands: 820,639 Host Write Commands: 2,466,027 Controller Busy Time: 5 Power Cycles: 22 Power On Hours: 2 Unsafe Shutdowns: 3 Media and Data Integrity Errors: 0 Error Information Log Entries: 0 Warning Comp. Temperature Time: 0 Critical Comp. Temperature Time: 0 Temperature Sensor 1: 47 Celsius Temperature Sensor 2: 30 Celsius Error Information (NVMe Log 0x01, 16 of 256 entries) No Errors Logged /dev/sda smartctl 7.2 2020-12-30 r5155 [x86_64-linux-6.2.6-76060206-generic] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Seagate FireCuda 2.5 Device Model: ST1000LX015-1U7172 Serial Number: -- LU WWN Device Id: 5 000c50 ... Firmware Version: SDM1 User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5400 rpm Form Factor: 2.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-3 T13/2161-D revision 3b SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Sat May 13 23:56:17 2023 CDT SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 128 (minimum power consumption without standby) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x71) SMART execute Offline immediate. No Auto Offline data collection support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 164) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x3035) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 082 052 006 - 171409183 3 Spin_Up_Time PO---- 099 099 000 - 0 4 Start_Stop_Count -O--CK 091 091 020 - 9718 5 Reallocated_Sector_Ct PO--CK 100 100 036 - 0 7 Seek_Error_Rate POSR-- 078 060 045 - 39230660303 9 Power_On_Hours -O--CK 091 091 000 - 8598 (71 35 0) 10 Spin_Retry_Count PO--C- 100 100 097 - 0 12 Power_Cycle_Count -O--CK 097 097 020 - 3176 184 End-to-End_Error -O--CK 100 100 099 - 0 187 Reported_Uncorrect -O--CK 093 093 000 - 7 188 Command_Timeout -O--CK 100 099 000 - 75 189 High_Fly_Writes -O-RCK 100 100 000 - 0 190 Airflow_Temperature_Cel -O---K 071 051 040 - 29 (Min/Max 23/29) 191 G-Sense_Error_Rate -O--CK 100 100 000 - 272 192 Power-Off_Retract_Count -O--CK 100 100 000 - 164 193 Load_Cycle_Count -O--CK 095 095 000 - 10259 194 Temperature_Celsius -O---K 029 049 000 - 29 (0 12 0 0 0) 197 Current_Pending_Sector -O--C- 100 100 000 - 0 198 Offline_Uncorrectable ----C- 100 100 000 - 0 199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 240 Head_Flying_Hours ------ 100 253 000 - 13899h+34m+09.506s 241 Total_LBAs_Written ------ 100 253 000 - 39251177273 242 Total_LBAs_Read ------ 100 253 000 - 30780135700 254 Free_Fall_Sensor -O--CK 100 100 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 5 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 8 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x21 GPL R/O 1 Write stream error log 0x22 GPL R/O 1 Read stream error log 0x24 GPL R/O 512 Current Device Internal Status Data log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa1 GPL,SL VS 24 Device vendor specific log 0xa2 GPL VS 6920 Device vendor specific log 0xa8 GPL,SL VS 136 Device vendor specific log 0xa9 GPL,SL VS 1 Device vendor specific log 0xab GPL VS 1 Device vendor specific log 0xb0 GPL VS 7680 Device vendor specific log 0xbe-0xbf GPL VS 65535 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL,SL VS 16 Device vendor specific log 0xc2 GPL,SL VS 240 Device vendor specific log 0xc3 GPL,SL VS 8 Device vendor specific log 0xc4 GPL,SL VS 24 Device vendor specific log 0xc9 GPL,SL VS 1 Device vendor specific log 0xca GPL,SL VS 16 Device vendor specific log 0xd3 GPL VS 1920 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (5 sectors) Device Error Count: 26 (device log contains only the most recent 20 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 26 [5] occurred at disk power-on lifetime: 2949 hours (122 days + 21 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 07 93 85 c0 00 00 Error: UNC at LBA = 0x079385c0 = 127108544 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 00 20 00 00 07 93 85 c0 40 00 00:09:22.168 READ FPDMA QUEUED 60 00 00 00 20 00 00 07 93 85 a0 40 00 00:09:22.099 READ FPDMA QUEUED 60 00 00 01 00 00 00 07 93 8b a0 40 00 00:09:22.097 READ FPDMA QUEUED 2f 00 00 00 01 00 00 00 00 00 10 28 00 00:09:22.083 READ LOG EXT 60 00 00 01 00 00 00 07 93 8c a0 40 00 00:09:11.292 READ FPDMA QUEUED Error 25 [4] occurred at disk power-on lifetime: 2949 hours (122 days + 21 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 07 93 85 c0 00 00 Error: UNC at LBA = 0x079385c0 = 127108544 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 01 00 00 00 07 93 8c a0 40 00 00:09:11.292 READ FPDMA QUEUED 60 00 00 01 00 00 00 07 93 8b a0 40 00 00:09:11.292 READ FPDMA QUEUED 60 00 00 01 00 00 00 07 93 8a a0 40 00 00:09:11.292 READ FPDMA QUEUED 60 00 00 01 00 00 00 07 93 89 a0 40 00 00:09:11.291 READ FPDMA QUEUED 60 00 00 01 00 00 00 07 93 88 a0 40 00 00:09:11.291 READ FPDMA QUEUED Error 24 [3] occurred at disk power-on lifetime: 2949 hours (122 days + 21 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 07 93 85 c0 00 00 Error: UNC at LBA = 0x079385c0 = 127108544 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 01 00 00 00 07 93 89 80 40 00 00:04:38.634 READ FPDMA QUEUED 60 00 00 01 00 00 00 07 93 88 80 40 00 00:04:38.634 READ FPDMA QUEUED 60 00 00 01 00 00 00 07 93 87 80 40 00 00:04:38.634 READ FPDMA QUEUED 60 00 00 01 00 00 00 07 93 86 80 40 00 00:04:38.634 READ FPDMA QUEUED 60 00 00 01 00 00 00 07 93 85 80 40 00 00:04:38.634 READ FPDMA QUEUED Error 23 [2] occurred at disk power-on lifetime: 2949 hours (122 days + 21 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 07 93 85 c0 00 00 Error: UNC at LBA = 0x079385c0 = 127108544 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 01 00 00 00 07 93 89 60 40 00 00:04:27.884 READ FPDMA QUEUED 60 00 00 01 00 00 00 07 93 88 60 40 00 00:04:27.884 READ FPDMA QUEUED 60 00 00 01 00 00 00 07 93 87 60 40 00 00:04:27.884 READ FPDMA QUEUED 60 00 00 01 00 00 00 07 93 86 60 40 00 00:04:27.884 READ FPDMA QUEUED 60 00 00 01 00 00 00 07 93 85 60 40 00 00:04:27.884 READ FPDMA QUEUED Error 22 [1] occurred at disk power-on lifetime: 2949 hours (122 days + 21 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 07 93 85 c0 00 00 Error: UNC at LBA = 0x079385c0 = 127108544 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 01 00 00 00 07 93 89 40 40 00 00:04:16.872 READ FPDMA QUEUED 60 00 00 01 00 00 00 07 93 88 40 40 00 00:04:16.872 READ FPDMA QUEUED 60 00 00 01 00 00 00 07 93 87 40 40 00 00:04:16.872 READ FPDMA QUEUED 60 00 00 01 00 00 00 07 93 86 40 40 00 00:04:16.872 READ FPDMA QUEUED 60 00 00 01 00 00 00 07 93 85 40 40 00 00:04:16.872 READ FPDMA QUEUED Error 21 [0] occurred at disk power-on lifetime: 2949 hours (122 days + 21 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 07 93 85 c0 00 00 Error: UNC at LBA = 0x079385c0 = 127108544 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 01 00 00 00 07 93 89 20 40 00 00:04:06.030 READ FPDMA QUEUED 60 00 00 01 00 00 00 07 93 88 20 40 00 00:04:06.030 READ FPDMA QUEUED 60 00 00 01 00 00 00 07 93 87 20 40 00 00:04:06.030 READ FPDMA QUEUED 60 00 00 01 00 00 00 07 93 86 20 40 00 00:04:06.030 READ FPDMA QUEUED 60 00 00 01 00 00 00 07 93 85 20 40 00 00:04:06.030 READ FPDMA QUEUED Error 20 [19] occurred at disk power-on lifetime: 2949 hours (122 days + 21 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 07 93 85 c0 00 00 Error: UNC at LBA = 0x079385c0 = 127108544 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 01 00 00 00 07 93 89 00 40 00 00:03:54.907 READ FPDMA QUEUED 60 00 00 01 00 00 00 07 93 88 00 40 00 00:03:54.907 READ FPDMA QUEUED 60 00 00 01 00 00 00 07 93 87 00 40 00 00:03:54.907 READ FPDMA QUEUED 60 00 00 01 00 00 00 07 93 86 00 40 00 00:03:54.907 READ FPDMA QUEUED 60 00 00 01 00 00 00 07 93 85 00 40 00 00:03:54.907 READ FPDMA QUEUED Error 19 [18] occurred at disk power-on lifetime: 2949 hours (122 days + 21 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 07 93 85 c0 00 00 Error: UNC at LBA = 0x079385c0 = 127108544 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 01 00 00 00 07 93 88 e0 40 00 00:03:44.112 READ FPDMA QUEUED 60 00 00 01 00 00 00 07 93 87 e0 40 00 00:03:44.112 READ FPDMA QUEUED 60 00 00 01 00 00 00 07 93 86 e0 40 00 00:03:44.112 READ FPDMA QUEUED 60 00 00 01 00 00 00 07 93 85 e0 40 00 00:03:44.112 READ FPDMA QUEUED 60 00 00 01 00 00 00 07 93 84 e0 40 00 00:03:44.112 READ FPDMA QUEUED SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 5505 - # 2 Short offline Aborted by host 90% 5505 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 522 (0x020a) Device State: Active (0) Current Temperature: 29 Celsius Power Cycle Min/Max Temperature: 23/29 Celsius Lifetime Min/Max Temperature: 12/56 Celsius Specified Max Operating Temperature: 36 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 30 minutes Min/Max recommended Temperature: 14/55 Celsius Min/Max Temperature Limit: 10/60 Celsius Temperature History Size (Index): 128 (60) Index Estimated Time Temperature Celsius 61 2023-05-11 08:00 33 ************** ... ..( 5 skipped). .. ************** 67 2023-05-11 11:00 33 ************** 68 2023-05-11 11:30 34 *************** 69 2023-05-11 12:00 33 ************** 70 2023-05-11 12:30 33 ************** 71 2023-05-11 13:00 34 *************** 72 2023-05-11 13:30 33 ************** ... ..( 8 skipped). .. ************** 81 2023-05-11 18:00 33 ************** 82 2023-05-11 18:30 34 *************** 83 2023-05-11 19:00 35 **************** 84 2023-05-11 19:30 36 ***************** 85 2023-05-11 20:00 35 **************** 86 2023-05-11 20:30 37 ****************** 87 2023-05-11 21:00 34 *************** 88 2023-05-11 21:30 35 **************** 89 2023-05-11 22:00 35 **************** 90 2023-05-11 22:30 36 ***************** 91 2023-05-11 23:00 37 ****************** 92 2023-05-11 23:30 37 ****************** 93 2023-05-12 00:00 38 ******************* 94 2023-05-12 00:30 ? - 95 2023-05-12 01:00 25 ****** 96 2023-05-12 01:30 21 ** 97 2023-05-12 02:00 35 **************** 98 2023-05-12 02:30 35 **************** 99 2023-05-12 03:00 37 ****************** 100 2023-05-12 03:30 37 ****************** 101 2023-05-12 04:00 37 ****************** 102 2023-05-12 04:30 38 ******************* 103 2023-05-12 05:00 37 ****************** 104 2023-05-12 05:30 35 **************** 105 2023-05-12 06:00 ? - 106 2023-05-12 06:30 25 ****** 107 2023-05-12 07:00 21 ** ... ..( 7 skipped). .. ** 115 2023-05-12 11:00 21 ** 116 2023-05-12 11:30 ? - 117 2023-05-12 12:00 25 ****** 118 2023-05-12 12:30 21 ** 119 2023-05-12 13:00 33 ************** 120 2023-05-12 13:30 34 *************** 121 2023-05-12 14:00 35 **************** 122 2023-05-12 14:30 34 *************** 123 2023-05-12 15:00 35 **************** 124 2023-05-12 15:30 36 ***************** 125 2023-05-12 16:00 34 *************** 126 2023-05-12 16:30 35 **************** 127 2023-05-12 17:00 37 ****************** 0 2023-05-12 17:30 38 ******************* 1 2023-05-12 18:00 38 ******************* 2 2023-05-12 18:30 ? - 3 2023-05-12 19:00 25 ****** 4 2023-05-12 19:30 20 * 5 2023-05-12 20:00 20 * 6 2023-05-12 20:30 20 * 7 2023-05-12 21:00 ? - 8 2023-05-12 21:30 25 ****** 9 2023-05-12 22:00 30 *********** 10 2023-05-12 22:30 ? - 11 2023-05-12 23:00 25 ****** 12 2023-05-12 23:30 23 **** 13 2023-05-13 00:00 38 ******************* 14 2023-05-13 00:30 39 ******************** 15 2023-05-13 01:00 39 ******************** 16 2023-05-13 01:30 ? - 17 2023-05-13 02:00 25 ****** 18 2023-05-13 02:30 20 * 19 2023-05-13 03:00 20 * 20 2023-05-13 03:30 20 * 21 2023-05-13 04:00 ? - 22 2023-05-13 04:30 25 ****** 23 2023-05-13 05:00 28 ********* 24 2023-05-13 05:30 ? - 25 2023-05-13 06:00 25 ****** 26 2023-05-13 06:30 35 **************** 27 2023-05-13 07:00 ? - 28 2023-05-13 07:30 25 ****** 29 2023-05-13 08:00 33 ************** ... ..( 5 skipped). .. ************** 35 2023-05-13 11:00 33 ************** 36 2023-05-13 11:30 ? - 37 2023-05-13 12:00 25 ****** 38 2023-05-13 12:30 26 ******* ... ..( 2 skipped). .. ******* 41 2023-05-13 14:00 26 ******* 42 2023-05-13 14:30 ? - 43 2023-05-13 15:00 25 ****** 44 2023-05-13 15:30 23 **** 45 2023-05-13 16:00 ? - 46 2023-05-13 16:30 25 ****** 47 2023-05-13 17:00 28 ********* 48 2023-05-13 17:30 35 **************** 49 2023-05-13 18:00 36 ***************** 50 2023-05-13 18:30 ? - 51 2023-05-13 19:00 25 ****** 52 2023-05-13 19:30 32 ************* 53 2023-05-13 20:00 ? - 54 2023-05-13 20:30 25 ****** 55 2023-05-13 21:00 20 * 56 2023-05-13 21:30 ? - 57 2023-05-13 22:00 25 ****** 58 2023-05-13 22:30 23 **** 59 2023-05-13 23:00 23 **** 60 2023-05-13 23:30 23 **** SCT Error Recovery Control command not supported Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 3176 --- Lifetime Power-On Resets 0x01 0x010 4 8598 --- Power-on Hours 0x01 0x018 6 39257853973 --- Logical Sectors Written 0x01 0x020 6 602422733 --- Number of Write Commands 0x01 0x028 6 30819915728 --- Logical Sectors Read 0x01 0x030 6 591964522 --- Number of Read Commands 0x01 0x038 6 - --- Date and Time TimeStamp 0x03 ===== = = === == Rotating Media Statistics (rev 1) == 0x03 0x008 4 5493 --- Spindle Motor Power-on Hours 0x03 0x010 4 3696 --- Head Flying Hours 0x03 0x018 4 10259 --- Head Load Events 0x03 0x020 4 0 --- Number of Reallocated Logical Sectors 0x03 0x028 4 0 --- Read Recovery Attempts 0x03 0x030 4 0 --- Number of Mechanical Start Failures 0x03 0x038 4 0 --- Number of Realloc. Candidate Logical Sectors 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 126 --- Number of Reported Uncorrectable Errors 0x04 0x010 4 75 --- Resets Between Cmd Acceptance and Completion 0x07 ===== = = === == Solid State Device Statistics (rev 1) == 0x07 0x008 1 0 --- Percentage Used Endurance Indicator |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x000a 2 2 Device-to-host register FISes sent due to a COMRESET 0x0001 2 0 Command failed due to ICRC error 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS