/dev/sda smartctl 6.6 (build date Jun 14 2018) [x86_64-linux-4.15.0-64-generic] (local build) Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Blue Device Model: WDC WD10EZRZ-22HTKB0 Serial Number: -- LU WWN Device Id: 5 0014ee ... Firmware Version: 01.01A01 User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5400 rpm Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-2, ACS-3 T13/2161-D revision 3b SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Thu Sep 19 09:49:03 2019 MSK SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (13500) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 154) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x3035) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 3 Spin_Up_Time POS--K 135 134 021 - 4216 4 Start_Stop_Count -O--CK 100 100 000 - 394 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 9 Power_On_Hours -O--CK 098 098 000 - 1964 10 Spin_Retry_Count -O--CK 100 100 000 - 0 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 389 192 Power-Off_Retract_Count -O--CK 200 200 000 - 20 193 Load_Cycle_Count -O--CK 189 189 000 - 34260 194 Temperature_Celsius -O---K 112 109 000 - 31 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 0 198 Offline_Uncorrectable ----CK 200 200 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb7 GPL,SL VS 1 Device vendor specific log 0xbd GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 93 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 258 (0x0102) SCT Support Level: 1 Device State: Active (0) Current Temperature: 31 Celsius Power Cycle Min/Max Temperature: 24/31 Celsius Lifetime Min/Max Temperature: 21/35 Celsius Under/Over Temperature Limit Count: 0/0 Vendor specific: 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 478 (72) Index Estimated Time Temperature Celsius 73 2019-09-19 01:52 31 ************ ... ..( 48 skipped). .. ************ 122 2019-09-19 02:41 31 ************ 123 2019-09-19 02:42 29 ********** ... ..( 23 skipped). .. ********** 147 2019-09-19 03:06 29 ********** 148 2019-09-19 03:07 30 *********** ... ..( 15 skipped). .. *********** 164 2019-09-19 03:23 30 *********** 165 2019-09-19 03:24 31 ************ 166 2019-09-19 03:25 30 *********** ... ..( 13 skipped). .. *********** 180 2019-09-19 03:39 30 *********** 181 2019-09-19 03:40 31 ************ 182 2019-09-19 03:41 30 *********** ... ..( 2 skipped). .. *********** 185 2019-09-19 03:44 30 *********** 186 2019-09-19 03:45 31 ************ 187 2019-09-19 03:46 31 ************ 188 2019-09-19 03:47 31 ************ 189 2019-09-19 03:48 30 *********** ... ..( 4 skipped). .. *********** 194 2019-09-19 03:53 30 *********** 195 2019-09-19 03:54 31 ************ 196 2019-09-19 03:55 30 *********** ... ..( 31 skipped). .. *********** 228 2019-09-19 04:27 30 *********** 229 2019-09-19 04:28 31 ************ 230 2019-09-19 04:29 30 *********** ... ..( 3 skipped). .. *********** 234 2019-09-19 04:33 30 *********** 235 2019-09-19 04:34 31 ************ ... ..(135 skipped). .. ************ 371 2019-09-19 06:50 31 ************ 372 2019-09-19 06:51 ? - 373 2019-09-19 06:52 25 ****** 374 2019-09-19 06:53 24 ***** 375 2019-09-19 06:54 25 ****** 376 2019-09-19 06:55 26 ******* 377 2019-09-19 06:56 27 ******** ... ..( 3 skipped). .. ******** 381 2019-09-19 07:00 27 ******** 382 2019-09-19 07:01 28 ********* 383 2019-09-19 07:02 27 ******** 384 2019-09-19 07:03 28 ********* ... ..( 3 skipped). .. ********* 388 2019-09-19 07:07 28 ********* 389 2019-09-19 07:08 29 ********** ... ..( 7 skipped). .. ********** 397 2019-09-19 07:16 29 ********** 398 2019-09-19 07:17 30 *********** ... ..( 25 skipped). .. *********** 424 2019-09-19 07:43 30 *********** 425 2019-09-19 07:44 31 ************ ... ..(124 skipped). .. ************ 72 2019-09-19 09:49 31 ************ SCT Error Recovery Control command not supported Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 2 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 3 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x8000 4 13690 Vendor specific /dev/sdb smartctl 6.6 (build date Jun 14 2018) [x86_64-linux-4.15.0-64-generic] (local build) Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Blue Device Model: WDC WD10EZRZ-22HTKB0 Serial Number: -- LU WWN Device Id: 5 0014ee ... Firmware Version: 01.01A01 User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5400 rpm Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-2, ACS-3 T13/2161-D revision 3b SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Thu Sep 19 09:49:03 2019 MSK SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (14460) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 165) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x3035) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 3 Spin_Up_Time POS--K 134 134 021 - 4275 4 Start_Stop_Count -O--CK 100 100 000 - 618 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-K 100 253 000 - 0 9 Power_On_Hours -O--CK 098 098 000 - 1949 10 Spin_Retry_Count -O--CK 100 100 000 - 0 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 389 192 Power-Off_Retract_Count -O--CK 200 200 000 - 14 193 Load_Cycle_Count -O--CK 199 199 000 - 5815 194 Temperature_Celsius -O---K 111 106 000 - 32 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 0 198 Offline_Uncorrectable ----CK 200 200 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb7 GPL,SL VS 1 Device vendor specific log 0xbd GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 93 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 258 (0x0102) SCT Support Level: 1 Device State: Active (0) Current Temperature: 32 Celsius Power Cycle Min/Max Temperature: 24/33 Celsius Lifetime Min/Max Temperature: 21/37 Celsius Under/Over Temperature Limit Count: 0/0 Vendor specific: 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 478 (111) Index Estimated Time Temperature Celsius 112 2019-09-19 01:52 32 ************* ... ..( 38 skipped). .. ************* 151 2019-09-19 02:31 32 ************* 152 2019-09-19 02:32 33 ************** 153 2019-09-19 02:33 32 ************* ... ..( 7 skipped). .. ************* 161 2019-09-19 02:41 32 ************* 162 2019-09-19 02:42 30 *********** ... ..( 13 skipped). .. *********** 176 2019-09-19 02:56 30 *********** 177 2019-09-19 02:57 31 ************ ... ..( 31 skipped). .. ************ 209 2019-09-19 03:29 31 ************ 210 2019-09-19 03:30 32 ************* ... ..( 91 skipped). .. ************* 302 2019-09-19 05:02 32 ************* 303 2019-09-19 05:03 33 ************** 304 2019-09-19 05:04 32 ************* 305 2019-09-19 05:05 33 ************** ... ..( 14 skipped). .. ************** 320 2019-09-19 05:20 33 ************** 321 2019-09-19 05:21 32 ************* ... ..( 19 skipped). .. ************* 341 2019-09-19 05:41 32 ************* 342 2019-09-19 05:42 33 ************** ... ..( 11 skipped). .. ************** 354 2019-09-19 05:54 33 ************** 355 2019-09-19 05:55 34 *************** ... ..( 4 skipped). .. *************** 360 2019-09-19 06:00 34 *************** 361 2019-09-19 06:01 33 ************** ... ..( 38 skipped). .. ************** 400 2019-09-19 06:40 33 ************** 401 2019-09-19 06:41 32 ************* ... ..( 8 skipped). .. ************* 410 2019-09-19 06:50 32 ************* 411 2019-09-19 06:51 ? - 412 2019-09-19 06:52 24 ***** 413 2019-09-19 06:53 25 ****** 414 2019-09-19 06:54 25 ****** 415 2019-09-19 06:55 26 ******* 416 2019-09-19 06:56 26 ******* 417 2019-09-19 06:57 27 ******** ... ..( 2 skipped). .. ******** 420 2019-09-19 07:00 27 ******** 421 2019-09-19 07:01 28 ********* ... ..( 2 skipped). .. ********* 424 2019-09-19 07:04 28 ********* 425 2019-09-19 07:05 29 ********** ... ..( 3 skipped). .. ********** 429 2019-09-19 07:09 29 ********** 430 2019-09-19 07:10 30 *********** ... ..( 6 skipped). .. *********** 437 2019-09-19 07:17 30 *********** 438 2019-09-19 07:18 31 ************ ... ..( 16 skipped). .. ************ 455 2019-09-19 07:35 31 ************ 456 2019-09-19 07:36 32 ************* ... ..(132 skipped). .. ************* 111 2019-09-19 09:49 32 ************* SCT Error Recovery Control command not supported Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 2 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 3 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x8000 4 13690 Vendor specific /dev/sdc smartctl 6.6 (build date Jun 14 2018) [x86_64-linux-4.15.0-64-generic] (local build) Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: SAMSUNG SpinPoint F1 DT Device Model: SAMSUNG HD103UJ Serial Number: -- LU WWN Device Id: 5 0024e9 ... Firmware Version: 1AA01118 User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: ATA/ATAPI-7, ATA8-ACS T13/1699-D revision 3b Local Time is: Thu Sep 19 09:49:03 2019 MSK SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Disabled APM level is: 254 (maximum performance) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (13783) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 231) minutes. Conveyance self-test routine recommended polling time: ( 24) minutes. SCT capabilities: (0x003f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 100 100 051 - 0 3 Spin_Up_Time POS--- 069 069 011 - 10070 4 Start_Stop_Count -O--CK 087 087 000 - 13352 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 7 Seek_Error_Rate POSR-- 100 100 051 - 0 8 Seek_Time_Performance P-S--K 100 100 015 - 11500 9 Power_On_Hours -O--CK 096 096 000 - 19836 10 Spin_Retry_Count PO--CK 100 100 051 - 0 11 Calibration_Retry_Count -O--C- 100 100 000 - 0 12 Power_Cycle_Count -O--CK 092 092 000 - 7630 13 Read_Soft_Error_Rate -OSR-- 100 100 000 - 0 183 Runtime_Bad_Block -O--CK 100 100 000 - 0 184 End-to-End_Error PO--CK 100 100 000 - 0 187 Reported_Uncorrect -O--CK 100 100 000 - 0 188 Command_Timeout -O--CK 100 100 000 - 0 190 Airflow_Temperature_Cel -O---K 074 001 000 - 26 (Min/Max 16/26) 194 Temperature_Celsius -O---K 073 056 000 - 27 (Min/Max 16/27) 195 Hardware_ECC_Recovered -O-RC- 100 100 000 - 887 196 Reallocated_Event_Count -O--CK 100 100 000 - 0 197 Current_Pending_Sector -O--C- 100 100 000 - 0 198 Offline_Uncorrectable ----CK 100 100 000 - 0 199 UDMA_CRC_Error_Count -OSRCK 100 100 000 - 0 200 Multi_Zone_Error_Rate -O-R-- 100 100 000 - 0 201 Soft_Read_Error_Rate -O-R-- 253 253 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 2 Comprehensive SMART error log 0x03 GPL R/O 2 Ext. Comprehensive SMART error log 0x04 GPL R/O 2 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 2 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x20 GPL R/O 2 Streaming performance log [OBS-8] 0x21 GPL R/O 1 Write stream error log 0x22 GPL R/O 1 Read stream error log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (2 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (2 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed without error 00% 18751 - # 2 Short offline Completed without error 00% 18746 - # 3 Extended offline Aborted by host 90% 17445 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 2 SCT Version (vendor specific): 256 (0x0100) SCT Support Level: 1 Device State: Active (0) Current Temperature: 27 Celsius Power Cycle Max Temperature: 28 Celsius Lifetime Max Temperature: 44 Celsius SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: -4/72 Celsius Min/Max Temperature Limit: -9/77 Celsius Temperature History Size (Index): 128 (66) Index Estimated Time Temperature Celsius 67 2019-09-19 07:42 27 ******** ... ..(112 skipped). .. ******** 52 2019-09-19 09:35 27 ******** 53 2019-09-19 09:36 28 ********* 54 2019-09-19 09:37 27 ******** 55 2019-09-19 09:38 27 ******** 56 2019-09-19 09:39 28 ********* 57 2019-09-19 09:40 27 ******** ... ..( 8 skipped). .. ******** 66 2019-09-19 09:49 27 ******** SCT Error Recovery Control: Read: Disabled Write: Disabled ATA_READ_LOG_EXT (addr=0x04:0x00, page=0, n=1) failed: scsi error badly formed scsi parameters Read Device Statistics page 0x00 failed Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x000a 2 2 Device-to-host register FISes sent due to a COMRESET 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 2 Transition from drive PhyRdy to drive PhyNRdy 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC /dev/sde smartctl 6.6 (build date Jun 14 2018) [x86_64-linux-4.15.0-64-generic] (local build) Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Red Device Model: WDC WD40EFRX-68N32N0 Serial Number: -- LU WWN Device Id: 5 0014ee ... Firmware Version: 82.00A82 User Capacity: 4,000,787,030,016 bytes [4.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5400 rpm Form Factor: 3.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-3 T13/2161-D revision 5 SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Thu Sep 19 09:49:04 2019 MSK SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (44160) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 468) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x303d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 3 Spin_Up_Time POS--K 187 169 021 - 5616 4 Start_Stop_Count -O--CK 099 099 000 - 1928 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 9 Power_On_Hours -O--CK 099 099 000 - 1258 10 Spin_Retry_Count -O--CK 100 100 000 - 0 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 12 Power_Cycle_Count -O--CK 099 099 000 - 1928 192 Power-Off_Retract_Count -O--CK 200 200 000 - 0 193 Load_Cycle_Count -O--CK 200 200 000 - 2812 194 Temperature_Celsius -O---K 117 096 000 - 33 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 0 198 Offline_Uncorrectable ----CK 100 253 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 200 Multi_Zone_Error_Rate ---R-- 100 253 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 8 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb6 GPL,SL VS 1 Device vendor specific log 0xb7 GPL,SL VS 56 Device vendor specific log 0xbd GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 93 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 258 (0x0102) SCT Support Level: 1 Device State: Active (0) Current Temperature: 32 Celsius Power Cycle Min/Max Temperature: 29/32 Celsius Lifetime Min/Max Temperature: 21/54 Celsius Under/Over Temperature Limit Count: 0/0 Vendor specific: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/65 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 478 (127) Index Estimated Time Temperature Celsius 128 2019-09-19 01:52 34 *************** 129 2019-09-19 01:53 35 **************** 130 2019-09-19 01:54 35 **************** 131 2019-09-19 01:55 ? - 132 2019-09-19 01:56 33 ************** 133 2019-09-19 01:57 32 ************* 134 2019-09-19 01:58 33 ************** ... ..( 2 skipped). .. ************** 137 2019-09-19 02:01 33 ************** 138 2019-09-19 02:02 34 *************** ... ..( 5 skipped). .. *************** 144 2019-09-19 02:08 34 *************** 145 2019-09-19 02:09 35 **************** ... ..( 6 skipped). .. **************** 152 2019-09-19 02:16 35 **************** 153 2019-09-19 02:17 36 ***************** ... ..( 7 skipped). .. ***************** 161 2019-09-19 02:25 36 ***************** 162 2019-09-19 02:26 37 ****************** 163 2019-09-19 02:27 37 ****************** 164 2019-09-19 02:28 ? - 165 2019-09-19 02:29 29 ********** 166 2019-09-19 02:30 29 ********** 167 2019-09-19 02:31 29 ********** 168 2019-09-19 02:32 30 *********** 169 2019-09-19 02:33 30 *********** 170 2019-09-19 02:34 31 ************ 171 2019-09-19 02:35 31 ************ 172 2019-09-19 02:36 31 ************ 173 2019-09-19 02:37 32 ************* ... ..( 5 skipped). .. ************* 179 2019-09-19 02:43 32 ************* 180 2019-09-19 02:44 33 ************** ... ..( 5 skipped). .. ************** 186 2019-09-19 02:50 33 ************** 187 2019-09-19 02:51 ? - 188 2019-09-19 02:52 32 ************* 189 2019-09-19 02:53 32 ************* 190 2019-09-19 02:54 32 ************* 191 2019-09-19 02:55 33 ************** ... ..( 2 skipped). .. ************** 194 2019-09-19 02:58 33 ************** 195 2019-09-19 02:59 34 *************** ... ..( 7 skipped). .. *************** 203 2019-09-19 03:07 34 *************** 204 2019-09-19 03:08 35 **************** ... ..( 3 skipped). .. **************** 208 2019-09-19 03:12 35 **************** 209 2019-09-19 03:13 ? - 210 2019-09-19 03:14 27 ******** 211 2019-09-19 03:15 26 ******* 212 2019-09-19 03:16 27 ******** 213 2019-09-19 03:17 27 ******** 214 2019-09-19 03:18 27 ******** 215 2019-09-19 03:19 28 ********* 216 2019-09-19 03:20 28 ********* 217 2019-09-19 03:21 28 ********* 218 2019-09-19 03:22 29 ********** ... ..( 2 skipped). .. ********** 221 2019-09-19 03:25 29 ********** 222 2019-09-19 03:26 30 *********** ... ..( 3 skipped). .. *********** 226 2019-09-19 03:30 30 *********** 227 2019-09-19 03:31 31 ************ ... ..( 3 skipped). .. ************ 231 2019-09-19 03:35 31 ************ 232 2019-09-19 03:36 32 ************* ... ..( 5 skipped). .. ************* 238 2019-09-19 03:42 32 ************* 239 2019-09-19 03:43 33 ************** ... ..( 2 skipped). .. ************** 242 2019-09-19 03:46 33 ************** 243 2019-09-19 03:47 ? - 244 2019-09-19 03:48 31 ************ 245 2019-09-19 03:49 30 *********** 246 2019-09-19 03:50 31 ************ 247 2019-09-19 03:51 31 ************ 248 2019-09-19 03:52 31 ************ 249 2019-09-19 03:53 32 ************* ... ..( 4 skipped). .. ************* 254 2019-09-19 03:58 32 ************* 255 2019-09-19 03:59 33 ************** ... ..( 5 skipped). .. ************** 261 2019-09-19 04:05 33 ************** 262 2019-09-19 04:06 34 *************** ... ..( 8 skipped). .. *************** 271 2019-09-19 04:15 34 *************** 272 2019-09-19 04:16 35 **************** ... ..( 2 skipped). .. **************** 275 2019-09-19 04:19 35 **************** 276 2019-09-19 04:20 ? - 277 2019-09-19 04:21 28 ********* 278 2019-09-19 04:22 28 ********* 279 2019-09-19 04:23 28 ********* 280 2019-09-19 04:24 29 ********** 281 2019-09-19 04:25 29 ********** 282 2019-09-19 04:26 30 *********** 283 2019-09-19 04:27 30 *********** 284 2019-09-19 04:28 ? - 285 2019-09-19 04:29 31 ************ ... ..( 3 skipped). .. ************ 289 2019-09-19 04:33 31 ************ 290 2019-09-19 04:34 32 ************* 291 2019-09-19 04:35 32 ************* 292 2019-09-19 04:36 32 ************* 293 2019-09-19 04:37 33 ************** ... ..( 2 skipped). .. ************** 296 2019-09-19 04:40 33 ************** 297 2019-09-19 04:41 34 *************** ... ..( 7 skipped). .. *************** 305 2019-09-19 04:49 34 *************** 306 2019-09-19 04:50 35 **************** ... ..( 8 skipped). .. **************** 315 2019-09-19 04:59 35 **************** 316 2019-09-19 05:00 36 ***************** ... ..( 6 skipped). .. ***************** 323 2019-09-19 05:07 36 ***************** 324 2019-09-19 05:08 ? - 325 2019-09-19 05:09 36 ***************** ... ..( 3 skipped). .. ***************** 329 2019-09-19 05:13 36 ***************** 330 2019-09-19 05:14 37 ****************** ... ..( 2 skipped). .. ****************** 333 2019-09-19 05:17 37 ****************** 334 2019-09-19 05:18 38 ******************* ... ..( 7 skipped). .. ******************* 342 2019-09-19 05:26 38 ******************* 343 2019-09-19 05:27 39 ******************** ... ..( 22 skipped). .. ******************** 366 2019-09-19 05:50 39 ******************** 367 2019-09-19 05:51 40 ********************* ... ..( 7 skipped). .. ********************* 375 2019-09-19 05:59 40 ********************* 376 2019-09-19 06:00 ? - 377 2019-09-19 06:01 33 ************** ... ..( 2 skipped). .. ************** 380 2019-09-19 06:04 33 ************** 381 2019-09-19 06:05 34 *************** ... ..( 3 skipped). .. *************** 385 2019-09-19 06:09 34 *************** 386 2019-09-19 06:10 35 **************** ... ..( 7 skipped). .. **************** 394 2019-09-19 06:18 35 **************** 395 2019-09-19 06:19 ? - 396 2019-09-19 06:20 36 ***************** ... ..( 2 skipped). .. ***************** 399 2019-09-19 06:23 36 ***************** 400 2019-09-19 06:24 37 ****************** ... ..( 3 skipped). .. ****************** 404 2019-09-19 06:28 37 ****************** 405 2019-09-19 06:29 ? - 406 2019-09-19 06:30 38 ******************* ... ..( 5 skipped). .. ******************* 412 2019-09-19 06:36 38 ******************* 413 2019-09-19 06:37 39 ******************** ... ..( 25 skipped). .. ******************** 439 2019-09-19 07:03 39 ******************** 440 2019-09-19 07:04 ? - 441 2019-09-19 07:05 32 ************* ... ..( 3 skipped). .. ************* 445 2019-09-19 07:09 32 ************* 446 2019-09-19 07:10 33 ************** ... ..( 3 skipped). .. ************** 450 2019-09-19 07:14 33 ************** 451 2019-09-19 07:15 34 *************** ... ..( 4 skipped). .. *************** 456 2019-09-19 07:20 34 *************** 457 2019-09-19 07:21 35 **************** ... ..( 5 skipped). .. **************** 463 2019-09-19 07:27 35 **************** 464 2019-09-19 07:28 36 ***************** ... ..( 7 skipped). .. ***************** 472 2019-09-19 07:36 36 ***************** 473 2019-09-19 07:37 ? - 474 2019-09-19 07:38 27 ******** 475 2019-09-19 07:39 27 ******** 476 2019-09-19 07:40 27 ******** 477 2019-09-19 07:41 28 ********* 0 2019-09-19 07:42 28 ********* 1 2019-09-19 07:43 29 ********** 2 2019-09-19 07:44 29 ********** 3 2019-09-19 07:45 30 *********** ... ..( 3 skipped). .. *********** 7 2019-09-19 07:49 30 *********** 8 2019-09-19 07:50 31 ************ ... ..( 3 skipped). .. ************ 12 2019-09-19 07:54 31 ************ 13 2019-09-19 07:55 32 ************* ... ..( 3 skipped). .. ************* 17 2019-09-19 07:59 32 ************* 18 2019-09-19 08:00 33 ************** 19 2019-09-19 08:01 33 ************** 20 2019-09-19 08:02 33 ************** 21 2019-09-19 08:03 ? - 22 2019-09-19 08:04 34 *************** ... ..( 4 skipped). .. *************** 27 2019-09-19 08:09 34 *************** 28 2019-09-19 08:10 35 **************** ... ..( 3 skipped). .. **************** 32 2019-09-19 08:14 35 **************** 33 2019-09-19 08:15 36 ***************** ... ..( 2 skipped). .. ***************** 36 2019-09-19 08:18 36 ***************** 37 2019-09-19 08:19 37 ****************** ... ..( 3 skipped). .. ****************** 41 2019-09-19 08:23 37 ****************** 42 2019-09-19 08:24 38 ******************* ... ..( 17 skipped). .. ******************* 60 2019-09-19 08:42 38 ******************* 61 2019-09-19 08:43 39 ******************** ... ..( 9 skipped). .. ******************** 71 2019-09-19 08:53 39 ******************** 72 2019-09-19 08:54 40 ********************* ... ..( 13 skipped). .. ********************* 86 2019-09-19 09:08 40 ********************* 87 2019-09-19 09:09 41 ********************** ... ..( 6 skipped). .. ********************** 94 2019-09-19 09:16 41 ********************** 95 2019-09-19 09:17 ? - 96 2019-09-19 09:18 35 **************** 97 2019-09-19 09:19 ? - 98 2019-09-19 09:20 28 ********* 99 2019-09-19 09:21 28 ********* 100 2019-09-19 09:22 29 ********** 101 2019-09-19 09:23 29 ********** 102 2019-09-19 09:24 29 ********** 103 2019-09-19 09:25 30 *********** ... ..( 2 skipped). .. *********** 106 2019-09-19 09:28 30 *********** 107 2019-09-19 09:29 31 ************ ... ..( 2 skipped). .. ************ 110 2019-09-19 09:32 31 ************ 111 2019-09-19 09:33 32 ************* ... ..( 3 skipped). .. ************* 115 2019-09-19 09:37 32 ************* 116 2019-09-19 09:38 33 ************** ... ..( 4 skipped). .. ************** 121 2019-09-19 09:43 33 ************** 122 2019-09-19 09:44 34 *************** ... ..( 4 skipped). .. *************** 127 2019-09-19 09:49 34 *************** SCT Error Recovery Control: Read: 70 (7.0 seconds) Write: 70 (7.0 seconds) Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 1928 --- Lifetime Power-On Resets 0x01 0x010 4 1258 --- Power-on Hours 0x01 0x018 6 12938593916 --- Logical Sectors Written 0x01 0x020 6 10008006 --- Number of Write Commands 0x01 0x028 6 5425700283 --- Logical Sectors Read 0x01 0x030 6 16036464 --- Number of Read Commands 0x01 0x038 6 233832704 --- Date and Time TimeStamp 0x03 ===== = = === == Rotating Media Statistics (rev 1) == 0x03 0x008 4 1253 --- Spindle Motor Power-on Hours 0x03 0x010 4 599 --- Head Flying Hours 0x03 0x018 4 2813 --- Head Load Events 0x03 0x020 4 0 --- Number of Reallocated Logical Sectors 0x03 0x028 4 0 --- Read Recovery Attempts 0x03 0x030 4 0 --- Number of Mechanical Start Failures 0x03 0x038 4 0 --- Number of Realloc. Candidate Logical Sectors 0x03 0x040 4 0 --- Number of High Priority Unload Events 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors 0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion 0x05 ===== = = === == Temperature Statistics (rev 1) == 0x05 0x008 1 33 --- Current Temperature 0x05 0x010 1 35 --- Average Short Term Temperature 0x05 0x018 1 37 --- Average Long Term Temperature 0x05 0x020 1 54 --- Highest Temperature 0x05 0x028 1 25 --- Lowest Temperature 0x05 0x030 1 47 --- Highest Average Short Term Temperature 0x05 0x038 1 32 --- Lowest Average Short Term Temperature 0x05 0x040 1 37 --- Highest Average Long Term Temperature 0x05 0x048 1 37 --- Lowest Average Long Term Temperature 0x05 0x050 4 0 --- Time in Over-Temperature 0x05 0x058 1 65 --- Specified Maximum Operating Temperature 0x05 0x060 4 0 --- Time in Under-Temperature 0x05 0x068 1 0 --- Specified Minimum Operating Temperature 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x008 4 1930 --- Number of Hardware Resets 0x06 0x010 4 2 --- Number of ASR Events 0x06 0x018 4 0 --- Number of Interface CRC Errors |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 1 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x8000 4 732 Vendor specific