/dev/nvme0n1 smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.2.6-desktop-1omv2390] (OpenMandriva Lx 7.3-3) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Number: KINGSTON OM8PCP3512F-AA Serial Number: -- Firmware Version: ECFK52.3 PCI Vendor/Subsystem ID: 0x2646 IEEE OUI Identifier: 0x0026b7 Total NVM Capacity: 512,110,190,592 [512 GB] Unallocated NVM Capacity: 0 Controller ID: 1 NVMe Version: 1.3 Number of Namespaces: 1 Namespace 1 Size/Capacity: 512,110,190,592 [512 GB] Namespace 1 Formatted LBA Size: 512 Namespace 1 IEEE EUI-64: 0026b7 ... Local Time is: Mon Mar 27 09:29:31 2023 CEST Firmware Updates (0x12): 1 Slot, no Reset required Optional Admin Commands (0x0017): Security Format Frmw_DL Self_Test Optional NVM Commands (0x0054): DS_Mngmt Sav/Sel_Feat Timestmp Log Page Attributes (0x0a): Cmd_Eff_Lg Telmtry_Lg Maximum Data Transfer Size: 512 Pages Warning Comp. Temp. Threshold: 85 Celsius Critical Comp. Temp. Threshold: 90 Celsius Supported Power States St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat 0 + 5.74W - - 0 0 0 0 0 0 1 + 5.21W - - 1 1 1 1 0 0 2 + 4.95W - - 2 2 2 2 0 0 3 - 0.0490W - - 3 3 3 3 2000 2000 4 - 0.0018W - - 4 4 4 4 25000 25000 Supported LBA Sizes (NSID 0x1) Id Fmt Data Metadt Rel_Perf 0 + 512 0 2 1 - 4096 0 1 === START OF SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED SMART/Health Information (NVMe Log 0x02) Critical Warning: 0x00 Temperature: 32 Celsius Available Spare: 100% Available Spare Threshold: 10% Percentage Used: 91% Data Units Read: 122,279,705 [62.6 TB] Data Units Written: 292,815,577 [149 TB] Host Read Commands: 1,116,799,930 Host Write Commands: 1,355,348,278 Controller Busy Time: 11,952 Power Cycles: 3,564 Power On Hours: 3,921 Unsafe Shutdowns: 825 Media and Data Integrity Errors: 0 Error Information Log Entries: 21,423 Warning Comp. Temperature Time: 0 Critical Comp. Temperature Time: 0 Thermal Temp. 1 Transition Count: 3335 Thermal Temp. 2 Transition Count: 6 Thermal Temp. 1 Total Time: 20129 Thermal Temp. 2 Total Time: 217 Error Information (NVMe Log 0x01, 16 of 63 entries) Num ErrCount SQId CmdId Status PELoc LBA NSID VS 0 21423 0 0x000c 0x4004 0x028 0 0 - /dev/sda smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.2.6-desktop-1omv2390] (OpenMandriva Lx 7.3-3) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Blue Mobile (SMR) Device Model: WDC WD10SPZX-22Z10T0 Serial Number: -- LU WWN Device Id: 5 0014ee ... Firmware Version: 01.01A01 User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5400 rpm Form Factor: 2.5 inches TRIM Command: Available, deterministic Device is: In smartctl database ATA Version is: ACS-3 T13/2161-D revision 5 SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Mon Mar 27 09:29:31 2023 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 128 (minimum power consumption without standby) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (11700) seconds. Offline data collection capabilities: (0x71) SMART execute Offline immediate. No Auto Offline data collection support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 257) minutes. Conveyance self-test routine recommended polling time: ( 3) minutes. SCT capabilities: (0x3035) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 3 Spin_Up_Time POS--K 193 188 021 - 1341 4 Start_Stop_Count -O--CK 069 069 000 - 31473 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 9 Power_On_Hours -O--CK 079 079 000 - 15399 10 Spin_Retry_Count -O--CK 100 100 000 - 0 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 12 Power_Cycle_Count -O--CK 092 092 000 - 8735 192 Power-Off_Retract_Count -O--CK 195 195 000 - 3937 193 Load_Cycle_Count -O--CK 173 173 000 - 82936 194 Temperature_Celsius -O---K 110 097 000 - 33 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 0 198 Offline_Uncorrectable ----CK 100 253 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 1 200 Multi_Zone_Error_Rate ---R-- 100 253 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x24 GPL R/O 277 Current Device Internal Status Data log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb6 GPL,SL VS 1 Device vendor specific log 0xb7 GPL,SL VS 74 Device vendor specific log 0xbd GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 93 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 15343 - # 2 Short offline Completed without error 00% 14642 - # 3 Short offline Completed without error 00% 14401 - # 4 Short offline Completed without error 00% 13224 - # 5 Short offline Completed without error 00% 13066 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 258 (0x0102) Device State: Active (0) Current Temperature: 33 Celsius Power Cycle Min/Max Temperature: 23/37 Celsius Lifetime Min/Max Temperature: 17/46 Celsius Under/Over Temperature Limit Count: 0/0 Vendor specific: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 128 (38) Index Estimated Time Temperature Celsius 39 2023-03-27 07:22 29 ********** ... ..( 49 skipped). .. ********** 89 2023-03-27 08:12 29 ********** 90 2023-03-27 08:13 28 ********* 91 2023-03-27 08:14 29 ********** 92 2023-03-27 08:15 29 ********** 93 2023-03-27 08:16 28 ********* 94 2023-03-27 08:17 28 ********* 95 2023-03-27 08:18 28 ********* 96 2023-03-27 08:19 29 ********** 97 2023-03-27 08:20 28 ********* ... ..( 3 skipped). .. ********* 101 2023-03-27 08:24 28 ********* 102 2023-03-27 08:25 ? - 103 2023-03-27 08:26 28 ********* 104 2023-03-27 08:27 28 ********* 105 2023-03-27 08:28 ? - 106 2023-03-27 08:29 23 **** 107 2023-03-27 08:30 24 ***** 108 2023-03-27 08:31 24 ***** 109 2023-03-27 08:32 24 ***** 110 2023-03-27 08:33 25 ****** ... ..( 2 skipped). .. ****** 113 2023-03-27 08:36 25 ****** 114 2023-03-27 08:37 26 ******* ... ..( 3 skipped). .. ******* 118 2023-03-27 08:41 26 ******* 119 2023-03-27 08:42 27 ******** ... ..( 11 skipped). .. ******** 3 2023-03-27 08:54 27 ******** 4 2023-03-27 08:55 28 ********* 5 2023-03-27 08:56 29 ********** 6 2023-03-27 08:57 29 ********** 7 2023-03-27 08:58 30 *********** 8 2023-03-27 08:59 30 *********** 9 2023-03-27 09:00 31 ************ 10 2023-03-27 09:01 32 ************* 11 2023-03-27 09:02 32 ************* 12 2023-03-27 09:03 33 ************** 13 2023-03-27 09:04 33 ************** 14 2023-03-27 09:05 34 *************** 15 2023-03-27 09:06 34 *************** 16 2023-03-27 09:07 34 *************** 17 2023-03-27 09:08 35 **************** 18 2023-03-27 09:09 35 **************** 19 2023-03-27 09:10 36 ***************** 20 2023-03-27 09:11 36 ***************** 21 2023-03-27 09:12 36 ***************** 22 2023-03-27 09:13 37 ****************** 23 2023-03-27 09:14 36 ***************** 24 2023-03-27 09:15 36 ***************** 25 2023-03-27 09:16 35 **************** ... ..( 3 skipped). .. **************** 29 2023-03-27 09:20 35 **************** 30 2023-03-27 09:21 34 *************** ... ..( 5 skipped). .. *************** 36 2023-03-27 09:27 34 *************** 37 2023-03-27 09:28 33 ************** 38 2023-03-27 09:29 33 ************** SCT Error Recovery Control command not supported Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 1 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x8000 4 3620 Vendor specific