/dev/sda smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.11.0-40-generic] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: P3-512 Serial Number: -- LU WWN Device Id: 0 000000 ... Firmware Version: FW200326 User Capacity: 512,110,190,592 bytes [512 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Form Factor: 2.5 inches Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ACS-2 T13/2015-D revision 3 SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Fri Nov 26 09:16:49 2021 -03 SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Unavailable === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 120) seconds. Offline data collection capabilities: (0x5d) SMART execute Offline immediate. No Auto Offline data collection support. Abort Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0002) Does not save SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 4) minutes. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 9 Power_On_Hours -O--CK 100 100 050 - 20 12 Power_Cycle_Count -O--CK 100 100 050 - 11 160 Unknown_Attribute -O--CK 100 100 050 - 0 161 Unknown_Attribute -O--CK 100 100 050 - 0 163 Unknown_Attribute -O--CK 100 100 050 - 244 164 Unknown_Attribute -O--CK 100 100 050 - 0 165 Unknown_Attribute -O--CK 100 100 050 - 0 166 Unknown_Attribute -O--CK 100 100 050 - 0 167 Unknown_Attribute -O--CK 100 100 050 - 0 168 Unknown_Attribute -O--CK 100 100 050 - 0 169 Unknown_Attribute -O--CK 100 100 050 - 0 175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0 176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 0 177 Wear_Leveling_Count -O--CK 100 100 050 - 0 178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 0 181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 192 Power-Off_Retract_Count -O--CK 100 100 050 - 4 194 Temperature_Celsius -O--CK 100 100 050 - 50 195 Hardware_ECC_Recovered -O--CK 100 100 050 - 0 196 Reallocated_Event_Count -O--CK 100 100 050 - 0 197 Current_Pending_Sector -O--CK 100 100 050 - 0 198 Offline_Uncorrectable -O--CK 100 100 050 - 0 199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0 232 Available_Reservd_Space -O--CK 100 100 050 - 0 241 Total_LBAs_Written -O--CK 100 100 050 - 2576 242 Total_LBAs_Read -O--CK 100 100 050 - 1078 249 Unknown_Attribute -O--CK 100 100 050 - 2728 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 GPL,SL R/O 1 Summary SMART error log 0x02 GPL,SL R/O 1 Comprehensive SMART error log 0x03 GPL,SL R/O 1 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 8 Device Statistics log 0x06 GPL,SL R/O 1 SMART self-test log 0x07 GPL,SL R/O 1 Extended self-test log 0x09 GPL,SL R/W 1 Selective self-test log 0x10 GPL,SL R/O 1 NCQ Command Error log 0x11 GPL,SL R/O 1 SATA Phy Event Counters log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0 GPL,SL VS 16 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 0 (1 sectors) No Errors Logged SMART Extended Self-test Log Version: 0 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 0 Note: revision number not 1 implies that no selective self-test has ever been run SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Commands not supported Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 11 --- Lifetime Power-On Resets 0x01 0x010 4 20 --- Power-on Hours 0x01 0x018 6 168820736 --- Logical Sectors Written 0x01 0x020 6 1238733 --- Number of Write Commands 0x01 0x028 6 70647808 --- Logical Sectors Read 0x01 0x030 6 539150 --- Number of Read Commands 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 11 --- Lifetime Power-On Resets 0x01 0x010 4 20 --- Power-on Hours 0x01 0x018 6 168820736 --- Logical Sectors Written 0x01 0x020 6 1238733 --- Number of Write Commands 0x01 0x028 6 70647808 --- Logical Sectors Read 0x01 0x030 6 539150 --- Number of Read Commands 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 11 --- Lifetime Power-On Resets 0x01 0x010 4 20 --- Power-on Hours 0x01 0x018 6 168820736 --- Logical Sectors Written 0x01 0x020 6 1238733 --- Number of Write Commands 0x01 0x028 6 70647808 --- Logical Sectors Read 0x01 0x030 6 539150 --- Number of Read Commands 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 11 --- Lifetime Power-On Resets 0x01 0x010 4 20 --- Power-on Hours 0x01 0x018 6 168820736 --- Logical Sectors Written 0x01 0x020 6 1238733 --- Number of Write Commands 0x01 0x028 6 70647808 --- Logical Sectors Read 0x01 0x030 6 539150 --- Number of Read Commands 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 11 --- Lifetime Power-On Resets 0x01 0x010 4 20 --- Power-on Hours 0x01 0x018 6 168820736 --- Logical Sectors Written 0x01 0x020 6 1238733 --- Number of Write Commands 0x01 0x028 6 70647808 --- Logical Sectors Read 0x01 0x030 6 539150 --- Number of Read Commands 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 11 --- Lifetime Power-On Resets 0x01 0x010 4 20 --- Power-on Hours 0x01 0x018 6 168820736 --- Logical Sectors Written 0x01 0x020 6 1238733 --- Number of Write Commands 0x01 0x028 6 70647808 --- Logical Sectors Read 0x01 0x030 6 539150 --- Number of Read Commands 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 11 --- Lifetime Power-On Resets 0x01 0x010 4 20 --- Power-on Hours 0x01 0x018 6 168820736 --- Logical Sectors Written 0x01 0x020 6 1238733 --- Number of Write Commands 0x01 0x028 6 70647808 --- Logical Sectors Read 0x01 0x030 6 539150 --- Number of Read Commands 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 11 --- Lifetime Power-On Resets 0x01 0x010 4 20 --- Power-on Hours 0x01 0x018 6 168820736 --- Logical Sectors Written 0x01 0x020 6 1238733 --- Number of Write Commands 0x01 0x028 6 70647808 --- Logical Sectors Read 0x01 0x030 6 539150 --- Number of Read Commands |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 4 0 Command failed due to ICRC error 0x0009 4 18 Transition from drive PhyRdy to drive PhyNRdy 0x000a 4 24 Device-to-host register FISes sent due to a COMRESET 0x000b 4 0 CRC errors within host-to-device FIS 0x000d 4 0 Non-CRC errors within host-to-device FIS /dev/sdb smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.11.0-40-generic] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: MZMPC032HBCD-00000 Serial Number: -- LU WWN Device Id: 5 002538 ... Firmware Version: CXM1201Q User Capacity: 32,017,047,552 bytes [32.0 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ACS-2 T13/2015-D revision 2 SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Fri Nov 26 09:16:49 2021 -03 SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Unavailable === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x02) Offline data collection activity was completed without error. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 180) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 3) minutes. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 9 Power_On_Hours -O--CK 098 098 000 - 6151 12 Power_Cycle_Count -O--CK 097 097 000 - 2241 177 Wear_Leveling_Count PO--C- 088 088 000 - 416 179 Used_Rsvd_Blk_Cnt_Tot PO--C- 090 090 010 - 78 180 Unused_Rsvd_Blk_Cnt_Tot PO--C- 090 090 010 - 738 181 Program_Fail_Cnt_Total -O--CK 100 100 010 - 0 182 Erase_Fail_Count_Total -O--CK 100 100 010 - 0 183 Runtime_Bad_Block PO--C- 100 100 010 - 0 184 End-to-End_Error PO--CK 100 100 097 - 0 187 Reported_Uncorrect -O--CK 100 100 000 - 0 190 Airflow_Temperature_Cel -O--CK 056 039 000 - 44 195 Hardware_ECC_Recovered -O-RC- 200 200 000 - 0 199 UDMA_CRC_Error_Count -OSRCK 253 253 000 - 0 235 Unknown_Attribute -O--C- 099 099 000 - 205 241 Total_LBAs_Written -O--CK 099 099 000 - 10616117701 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 GPL,SL R/O 1 Summary SMART error log 0x02 GPL,SL R/O 2 Comprehensive SMART error log 0x03 GPL,SL R/O 2 Ext. Comprehensive SMART error log 0x06 GPL,SL R/O 1 SMART self-test log 0x07 GPL,SL R/O 2 Extended self-test log 0x09 GPL,SL R/W 1 Selective self-test log 0x10 GPL,SL R/O 1 NCQ Command Error log 0x11 GPL,SL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log SMART Extended Comprehensive Error Log Version: 1 (2 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (2 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Commands not supported Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 49152 R_ERR response for data FIS 0x0003 2 53248 R_ERR response for device-to-host data FIS 0x0004 2 57344 R_ERR response for host-to-device data FIS 0x0005 2 7952 R_ERR response for non-data FIS 0x0006 2 2562 R_ERR response for device-to-host non-data FIS 0x0007 2 4096 R_ERR response for host-to-device non-data FIS 0x0008 2 7952 Device-to-host non-data FIS retries 0x0009 2 7953 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 8749 Device-to-host register FISes sent due to a COMRESET 0x000b 2 6145 CRC errors within host-to-device FIS 0x000d 2 7953 Non-CRC errors within host-to-device FIS 0x000f 2 8176 R_ERR response for host-to-device data FIS, CRC 0x0010 2 15 R_ERR response for host-to-device data FIS, non-CRC 0x0012 2 49153 R_ERR response for host-to-device non-data FIS, CRC 0x0013 2 12112 R_ERR response for host-to-device non-data FIS, non-CRC