/dev/nvme0n1 smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.18.0-un-def-alt9] (ALT Sisyphus 7.2-alt1) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Number: XPG SPECTRIX S40G Serial Number: -- Firmware Version: VB421D57 PCI Vendor/Subsystem ID: 0x10ec IEEE OUI Identifier: 0x00e04c Controller ID: 1 NVMe Version: 1.3 Number of Namespaces: 1 Namespace 1 Size/Capacity: 256,060,514,304 [256 GB] Namespace 1 Formatted LBA Size: 512 Local Time is: Thu Aug 18 16:33:50 2022 MSK Firmware Updates (0x02): 1 Slot Optional Admin Commands (0x0007): Security Format Frmw_DL Optional NVM Commands (0x0014): DS_Mngmt Sav/Sel_Feat Log Page Attributes (0x02): Cmd_Eff_Lg Maximum Data Transfer Size: 64 Pages Warning Comp. Temp. Threshold: 118 Celsius Critical Comp. Temp. Threshold: 150 Celsius Supported Power States St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat 0 + 8.00W - - 0 0 0 0 0 50000 1 + 4.00W - - 1 1 1 1 0 50000 2 + 3.00W - - 2 2 2 2 0 50000 3 - 0.0500W - - 3 3 3 3 4000 50000 4 - 0.0080W - - 4 4 4 4 8000 100000 Supported LBA Sizes (NSID 0x1) Id Fmt Data Metadt Rel_Perf 0 + 512 0 0 === START OF SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED SMART/Health Information (NVMe Log 0x02) Critical Warning: 0x00 Temperature: 44 Celsius Available Spare: 100% Available Spare Threshold: 32% Percentage Used: 0% Data Units Read: 646,742 [331 GB] Data Units Written: 603,476 [308 GB] Host Read Commands: 82,896,040 Host Write Commands: 3,204,571 Controller Busy Time: 0 Power Cycles: 7,414 Power On Hours: 168 Unsafe Shutdowns: 3,766 Media and Data Integrity Errors: 0 Error Information Log Entries: 84 Warning Comp. Temperature Time: 0 Critical Comp. Temperature Time: 0 Error Information (NVMe Log 0x01, 8 of 8 entries) No Errors Logged /dev/sdb smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.18.0-un-def-alt9] (ALT Sisyphus 7.2-alt1) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: HGST HTS725050B7E630 Serial Number: -- LU WWN Device Id: 5 0014ee ... Firmware Version: 01.01A01 User Capacity: 500,107,862,016 bytes [500 GB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 7200 rpm Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ACS-2, ACS-3 T13/2161-D revision 3b SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Thu Aug 18 16:33:50 2022 MSK SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 128 (minimum power consumption without standby) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Unknown === START OF READ SMART DATA SECTION === SMART Status not supported: Incomplete response, ATA output registers missing SMART overall-health self-assessment test result: PASSED Warning: This result is based on an Attribute check. General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 6600) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 78) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x3035) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 3 Spin_Up_Time POS--K 143 135 021 - 1850 4 Start_Stop_Count -O--CK 099 099 000 - 1056 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 9 Power_On_Hours -O--CK 100 100 000 - 400 10 Spin_Retry_Count -O--CK 100 100 000 - 0 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 674 192 Power-Off_Retract_Count -O--CK 200 200 000 - 306 193 Load_Cycle_Count -O--CK 199 199 000 - 3170 194 Temperature_Celsius -O---K 108 088 000 - 35 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 0 198 Offline_Uncorrectable ----CK 100 253 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 200 Multi_Zone_Error_Rate ---R-- 100 253 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb6 GPL,SL VS 1 Device vendor specific log 0xb7 GPL,SL VS 37 Device vendor specific log 0xbd GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 93 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) Device Error Count: 124 (device log contains only the most recent 24 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 124 [3] occurred at disk power-on lifetime: 350 hours (14 days + 14 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- 61 00 01 00 00 3a 38 5e 10 40 00 Device Fault; Error: ABRT 1 sectors at LBA = 0x3a385e10 = 976772624 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 01 00 00 3a 38 5e 10 40 00 00:02:45.570 READ DMA EXT 25 00 00 00 01 00 00 3a 38 5e 10 40 00 00:02:43.712 READ DMA EXT 25 00 00 00 01 00 00 3a 38 5e 10 40 00 00:02:41.855 READ DMA EXT 25 00 00 00 02 00 00 00 5a 00 02 40 00 00:02:41.855 READ DMA EXT 25 00 00 00 02 00 00 00 5a 00 0a 40 00 00:02:41.854 READ DMA EXT Error 123 [2] occurred at disk power-on lifetime: 350 hours (14 days + 14 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- 61 00 01 00 00 3a 38 5e 10 40 00 Device Fault; Error: ABRT 1 sectors at LBA = 0x3a385e10 = 976772624 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 01 00 00 3a 38 5e 10 40 00 00:02:43.712 READ DMA EXT 25 00 00 00 01 00 00 3a 38 5e 10 40 00 00:02:41.855 READ DMA EXT 25 00 00 00 02 00 00 00 5a 00 02 40 00 00:02:41.855 READ DMA EXT 25 00 00 00 02 00 00 00 5a 00 0a 40 00 00:02:41.854 READ DMA EXT 25 00 00 00 01 00 00 00 5a 00 00 40 00 00:02:41.854 READ DMA EXT Error 122 [1] occurred at disk power-on lifetime: 350 hours (14 days + 14 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- 61 00 01 00 00 3a 38 5e 10 40 00 Device Fault; Error: ABRT 1 sectors at LBA = 0x3a385e10 = 976772624 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 01 00 00 3a 38 5e 10 40 00 00:02:41.855 READ DMA EXT 25 00 00 00 02 00 00 00 5a 00 02 40 00 00:02:41.855 READ DMA EXT 25 00 00 00 02 00 00 00 5a 00 0a 40 00 00:02:41.854 READ DMA EXT 25 00 00 00 01 00 00 00 5a 00 00 40 00 00:02:41.854 READ DMA EXT 25 00 00 00 01 00 00 00 00 00 00 40 00 00:02:41.854 READ DMA EXT Error 121 [0] occurred at disk power-on lifetime: 350 hours (14 days + 14 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- 61 00 02 00 00 00 5a 00 02 40 00 Device Fault; Error: ABRT 2 sectors at LBA = 0x005a0002 = 5898242 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 02 00 00 00 5a 00 02 40 00 00:02:41.855 READ DMA EXT 25 00 00 00 02 00 00 00 5a 00 0a 40 00 00:02:41.854 READ DMA EXT 25 00 00 00 01 00 00 00 5a 00 00 40 00 00:02:41.854 READ DMA EXT 25 00 00 00 01 00 00 00 00 00 00 40 00 00:02:41.854 READ DMA EXT 25 00 00 00 01 00 00 3a 38 5e 00 40 00 00:02:41.854 READ DMA EXT Error 120 [23] occurred at disk power-on lifetime: 350 hours (14 days + 14 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- 61 00 02 00 00 00 5a 00 0a 40 00 Device Fault; Error: ABRT 2 sectors at LBA = 0x005a000a = 5898250 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 02 00 00 00 5a 00 0a 40 00 00:02:41.854 READ DMA EXT 25 00 00 00 01 00 00 00 5a 00 00 40 00 00:02:41.854 READ DMA EXT 25 00 00 00 01 00 00 00 00 00 00 40 00 00:02:41.854 READ DMA EXT 25 00 00 00 01 00 00 3a 38 5e 00 40 00 00:02:41.854 READ DMA EXT 25 00 00 00 01 00 00 3a 38 5e 90 40 00 00:02:41.853 READ DMA EXT Error 119 [22] occurred at disk power-on lifetime: 350 hours (14 days + 14 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- 61 00 01 00 00 00 5a 00 00 40 00 Device Fault; Error: ABRT 1 sectors at LBA = 0x005a0000 = 5898240 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 01 00 00 00 5a 00 00 40 00 00:02:41.854 READ DMA EXT 25 00 00 00 01 00 00 00 00 00 00 40 00 00:02:41.854 READ DMA EXT 25 00 00 00 01 00 00 3a 38 5e 00 40 00 00:02:41.854 READ DMA EXT 25 00 00 00 01 00 00 3a 38 5e 90 40 00 00:02:41.853 READ DMA EXT 25 00 00 00 01 00 00 3a 38 5e 80 40 00 00:02:41.853 READ DMA EXT Error 118 [21] occurred at disk power-on lifetime: 350 hours (14 days + 14 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- 61 00 01 00 00 00 00 00 00 40 00 Device Fault; Error: ABRT 1 sectors at LBA = 0x00000000 = 0 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 01 00 00 00 00 00 00 40 00 00:02:41.854 READ DMA EXT 25 00 00 00 01 00 00 3a 38 5e 00 40 00 00:02:41.854 READ DMA EXT 25 00 00 00 01 00 00 3a 38 5e 90 40 00 00:02:41.853 READ DMA EXT 25 00 00 00 01 00 00 3a 38 5e 80 40 00 00:02:41.853 READ DMA EXT ea 00 00 00 00 00 00 00 00 00 00 e0 00 00:02:38.323 FLUSH CACHE EXT Error 117 [20] occurred at disk power-on lifetime: 350 hours (14 days + 14 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- 61 00 01 00 00 3a 38 5e 00 40 00 Device Fault; Error: ABRT 1 sectors at LBA = 0x3a385e00 = 976772608 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 01 00 00 3a 38 5e 00 40 00 00:02:41.854 READ DMA EXT 25 00 00 00 01 00 00 3a 38 5e 90 40 00 00:02:41.853 READ DMA EXT 25 00 00 00 01 00 00 3a 38 5e 80 40 00 00:02:41.853 READ DMA EXT ea 00 00 00 00 00 00 00 00 00 00 e0 00 00:02:38.323 FLUSH CACHE EXT ea 00 00 00 00 00 00 00 00 00 00 e0 00 00:02:38.323 FLUSH CACHE EXT SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 258 (0x0102) Device State: Active (0) Current Temperature: 35 Celsius Power Cycle Min/Max Temperature: 29/35 Celsius Lifetime Min/Max Temperature: 19/60 Celsius Under/Over Temperature Limit Count: 0/0 Vendor specific: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 128 (1) Index Estimated Time Temperature Celsius 2 2022-08-18 14:26 32 ************* 3 2022-08-18 14:27 ? - 4 2022-08-18 14:28 31 ************ 5 2022-08-18 14:29 32 ************* 6 2022-08-18 14:30 32 ************* 7 2022-08-18 14:31 32 ************* 8 2022-08-18 14:32 33 ************** 9 2022-08-18 14:33 33 ************** 10 2022-08-18 14:34 34 *************** 11 2022-08-18 14:35 34 *************** 12 2022-08-18 14:36 35 **************** 13 2022-08-18 14:37 35 **************** 14 2022-08-18 14:38 35 **************** 15 2022-08-18 14:39 ? - 16 2022-08-18 14:40 24 ***** 17 2022-08-18 14:41 24 ***** 18 2022-08-18 14:42 25 ****** 19 2022-08-18 14:43 26 ******* 20 2022-08-18 14:44 26 ******* 21 2022-08-18 14:45 27 ******** 22 2022-08-18 14:46 28 ********* 23 2022-08-18 14:47 28 ********* 24 2022-08-18 14:48 29 ********** 25 2022-08-18 14:49 29 ********** 26 2022-08-18 14:50 29 ********** 27 2022-08-18 14:51 30 *********** 28 2022-08-18 14:52 31 ************ ... ..( 2 skipped). .. ************ 31 2022-08-18 14:55 31 ************ 32 2022-08-18 14:56 32 ************* 33 2022-08-18 14:57 32 ************* 34 2022-08-18 14:58 32 ************* 35 2022-08-18 14:59 ? - 36 2022-08-18 15:00 38 ******************* 37 2022-08-18 15:01 39 ******************** 38 2022-08-18 15:02 39 ******************** 39 2022-08-18 15:03 39 ******************** 40 2022-08-18 15:04 38 ******************* ... ..( 12 skipped). .. ******************* 53 2022-08-18 15:17 38 ******************* 54 2022-08-18 15:18 37 ****************** 55 2022-08-18 15:19 ? - 56 2022-08-18 15:20 37 ****************** 57 2022-08-18 15:21 38 ******************* ... ..( 23 skipped). .. ******************* 81 2022-08-18 15:45 38 ******************* 82 2022-08-18 15:46 37 ****************** ... ..( 3 skipped). .. ****************** 86 2022-08-18 15:50 37 ****************** 87 2022-08-18 15:51 36 ***************** ... ..( 9 skipped). .. ***************** 97 2022-08-18 16:01 36 ***************** 98 2022-08-18 16:02 35 **************** ... ..( 9 skipped). .. **************** 108 2022-08-18 16:12 35 **************** 109 2022-08-18 16:13 ? - 110 2022-08-18 16:14 35 **************** 111 2022-08-18 16:15 ? - 112 2022-08-18 16:16 29 ********** 113 2022-08-18 16:17 29 ********** 114 2022-08-18 16:18 30 *********** 115 2022-08-18 16:19 30 *********** 116 2022-08-18 16:20 31 ************ 117 2022-08-18 16:21 31 ************ 118 2022-08-18 16:22 32 ************* 119 2022-08-18 16:23 32 ************* 120 2022-08-18 16:24 32 ************* 121 2022-08-18 16:25 33 ************** 122 2022-08-18 16:26 33 ************** 123 2022-08-18 16:27 33 ************** 124 2022-08-18 16:28 34 *************** 125 2022-08-18 16:29 34 *************** 126 2022-08-18 16:30 34 *************** 127 2022-08-18 16:31 35 **************** 0 2022-08-18 16:32 35 **************** 1 2022-08-18 16:33 35 **************** SCT Error Recovery Control command not supported Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 1 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 1 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x8000 4 1062 Vendor specific