/dev/sda smartctl 7.2 2020-12-30 r5155 [x86_64-linux-6.5.0-14-generic] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: XrayDisk 120GB SSD Serial Number: -- LU WWN Device Id: 0 000000 ... Firmware Version: NX3403A3 User Capacity: 120,034,123,776 bytes [120 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Form Factor: 2.5 inches TRIM Command: Available Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ACS-4 T13/BSR INCITS 529 revision 5 SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Thu Jan 18 16:39:59 2024 UTC SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Unavailable === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 120) seconds. Offline data collection capabilities: (0x5d) SMART execute Offline immediate. No Auto Offline data collection support. Abort Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0002) Does not save SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 4) minutes. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 9 Power_On_Hours -O--CK 100 100 050 - 912 12 Power_Cycle_Count -O--CK 100 100 050 - 22 160 Unknown_Attribute -O--CK 100 100 050 - 0 161 Unknown_Attribute -O--CK 100 100 050 - 100 163 Unknown_Attribute -O--CK 100 100 050 - 48 164 Unknown_Attribute -O--CK 100 100 050 - 0 165 Unknown_Attribute -O--CK 100 100 050 - 0 166 Unknown_Attribute -O--CK 100 100 050 - 0 167 Unknown_Attribute -O--CK 100 100 050 - 0 168 Unknown_Attribute -O--CK 100 100 050 - 0 169 Unknown_Attribute -O--CK 100 100 050 - 100 175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0 176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 86 177 Wear_Leveling_Count -O--CK 100 100 050 - 2115 178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 2 181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 192 Power-Off_Retract_Count -O--CK 100 100 050 - 13 194 Temperature_Celsius -O--CK 100 100 050 - 41 198 Offline_Uncorrectable -O--CK 100 100 050 - 0 232 Available_Reservd_Space -O--CK 100 100 050 - 100 241 Total_LBAs_Written -O--CK 100 100 050 - 2947 242 Total_LBAs_Read -O--CK 100 100 050 - 491 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 GPL,SL R/O 1 Summary SMART error log 0x02 GPL,SL R/O 1 Comprehensive SMART error log 0x03 GPL,SL R/O 1 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 8 Device Statistics log 0x06 GPL,SL R/O 1 SMART self-test log 0x07 GPL,SL R/O 1 Extended self-test log 0x09 GPL,SL R/W 1 Selective self-test log 0x10 GPL,SL R/O 1 NCQ Command Error log 0x11 GPL,SL R/O 1 SATA Phy Event Counters log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0 GPL,SL VS 16 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) Device Error Count: 1 CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 1 [0] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- a0 00 01 00 00 00 00 00 25 51 00 Device Fault Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 2f 02 00 00 01 00 00 00 00 00 25 a0 00 00:05:26.430 READ LOG EXT ef 00 02 00 00 00 00 00 00 00 00 a0 00 00:05:26.400 SET FEATURES [Enable write cache] f5 00 00 00 00 00 00 00 00 00 00 a0 00 00:05:26.370 SECURITY FREEZE LOCK ef 00 66 00 00 00 00 00 00 00 00 a0 00 00:05:26.350 SET FEATURES [Disable revert defaults] c6 00 00 00 08 00 00 00 00 00 00 a0 00 00:05:26.250 SET MULTIPLE MODE SMART Extended Self-test Log Version: 0 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 0 Note: revision number not 1 implies that no selective self-test has ever been run SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Commands not supported Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 22 --- Lifetime Power-On Resets 0x01 0x010 4 912 --- Power-on Hours 0x01 0x018 6 193134592 --- Logical Sectors Written 0x01 0x020 6 5958932 --- Number of Write Commands 0x01 0x028 6 32178176 --- Logical Sectors Read 0x01 0x030 6 404406 --- Number of Read Commands 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 22 --- Lifetime Power-On Resets 0x01 0x010 4 912 --- Power-on Hours 0x01 0x018 6 193134592 --- Logical Sectors Written 0x01 0x020 6 5958932 --- Number of Write Commands 0x01 0x028 6 32178176 --- Logical Sectors Read 0x01 0x030 6 404406 --- Number of Read Commands 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 22 --- Lifetime Power-On Resets 0x01 0x010 4 912 --- Power-on Hours 0x01 0x018 6 193134592 --- Logical Sectors Written 0x01 0x020 6 5958932 --- Number of Write Commands 0x01 0x028 6 32178176 --- Logical Sectors Read 0x01 0x030 6 404406 --- Number of Read Commands 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 22 --- Lifetime Power-On Resets 0x01 0x010 4 912 --- Power-on Hours 0x01 0x018 6 193134592 --- Logical Sectors Written 0x01 0x020 6 5958932 --- Number of Write Commands 0x01 0x028 6 32178176 --- Logical Sectors Read 0x01 0x030 6 404406 --- Number of Read Commands 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 22 --- Lifetime Power-On Resets 0x01 0x010 4 912 --- Power-on Hours 0x01 0x018 6 193134592 --- Logical Sectors Written 0x01 0x020 6 5958932 --- Number of Write Commands 0x01 0x028 6 32178176 --- Logical Sectors Read 0x01 0x030 6 404406 --- Number of Read Commands 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 22 --- Lifetime Power-On Resets 0x01 0x010 4 912 --- Power-on Hours 0x01 0x018 6 193134592 --- Logical Sectors Written 0x01 0x020 6 5958932 --- Number of Write Commands 0x01 0x028 6 32178176 --- Logical Sectors Read 0x01 0x030 6 404406 --- Number of Read Commands 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 22 --- Lifetime Power-On Resets 0x01 0x010 4 912 --- Power-on Hours 0x01 0x018 6 193134592 --- Logical Sectors Written 0x01 0x020 6 5958932 --- Number of Write Commands 0x01 0x028 6 32178176 --- Logical Sectors Read 0x01 0x030 6 404406 --- Number of Read Commands 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 22 --- Lifetime Power-On Resets 0x01 0x010 4 912 --- Power-on Hours 0x01 0x018 6 193134592 --- Logical Sectors Written 0x01 0x020 6 5958932 --- Number of Write Commands 0x01 0x028 6 32178176 --- Logical Sectors Read 0x01 0x030 6 404406 --- Number of Read Commands |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0009 2 73 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 64 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS /dev/sdb smartctl 7.2 2020-12-30 r5155 [x86_64-linux-6.5.0-14-generic] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Seagate Momentus 5400.6 Device Model: ST9320325AS Serial Number: -- LU WWN Device Id: 5 000c50 ... Firmware Version: 0005HPM1 User Capacity: 320,072,933,376 bytes [320 GB] Sector Size: 512 bytes logical/physical Rotation Rate: 5400 rpm Form Factor: 2.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 2.6, 3.0 Gb/s Local Time is: Thu Jan 18 16:39:59 2024 UTC SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 128 (minimum power consumption without standby) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Unknown === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED See vendor-specific Attribute list for marginal Attributes. General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x53) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 96) minutes. SCT capabilities: (0x103f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 088 087 006 - 198715952 3 Spin_Up_Time -O---- 099 098 000 - 0 4 Start_Stop_Count PO--CK 092 092 000 - 9091 5 Reallocated_Sector_Ct PO--CK 100 100 036 - 3 7 Seek_Error_Rate POSR-- 079 060 030 - 95364037 9 Power_On_Hours -O--CK 095 095 000 - 4695 10 Spin_Retry_Count PO--C- 100 100 097 - 0 12 Power_Cycle_Count PO--CK 097 097 020 - 3839 183 Runtime_Bad_Block -O--CK 100 253 000 - 0 184 End-to-End_Error PO--CK 100 100 097 - 0 187 Reported_Uncorrect -O--CK 001 001 000 - 1151 188 Command_Timeout -O--CK 100 080 000 - 25770197050 189 High_Fly_Writes -O-RCK 100 100 000 - 0 190 Airflow_Temperature_Cel -O---K 077 042 045 Past 23 (0 7 25 22 0) 191 G-Sense_Error_Rate -O--CK 100 100 000 - 202 192 Power-Off_Retract_Count -O--CK 100 100 000 - 42 193 Load_Cycle_Count -O--CK 062 062 000 - 77333 194 Temperature_Celsius -O---K 023 058 000 - 23 (0 16 0 0 0) 195 Hardware_ECC_Recovered -O-RC- 056 048 000 - 198715952 196 Reallocated_Event_Count PO--CK 100 100 036 - 3 197 Current_Pending_Sector -O--C- 100 100 000 - 0 198 Offline_Uncorrectable ----C- 100 100 000 - 0 199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 882 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 GPL,SL R/O 1 Summary SMART error log 0x02 GPL,SL R/O 5 Comprehensive SMART error log 0x03 GPL,SL R/O 5 Ext. Comprehensive SMART error log 0x06 GPL,SL R/O 1 SMART self-test log 0x07 GPL,SL R/O 1 Extended self-test log 0x09 GPL,SL R/W 1 Selective self-test log 0x10 GPL,SL R/O 1 NCQ Command Error log 0x11 GPL,SL R/O 1 SATA Phy Event Counters log 0x21 GPL,SL R/O 1 Write stream error log 0x22 GPL,SL R/O 1 Read stream error log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa1 GPL,SL VS 20 Device vendor specific log 0xa2 GPL VS 2248 Device vendor specific log 0xa8 GPL,SL VS 65 Device vendor specific log 0xa9 GPL,SL VS 1 Device vendor specific log 0xb0 GPL VS 2864 Device vendor specific log 0xbe-0xbf GPL VS 65535 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (5 sectors) Device Error Count: 1814 (device log contains only the most recent 20 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 1814 [13] occurred at disk power-on lifetime: 4664 hours (194 days + 8 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 00 82 c5 60 00 00 Error: UNC at LBA = 0x0082c560 = 8570208 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 08 00 00 00 82 c5 60 e0 00 00:50:18.792 READ DMA EXT 25 00 00 00 08 00 00 00 82 c5 60 e0 00 00:50:16.485 READ DMA EXT 25 00 00 00 08 00 00 00 66 3f f8 e0 00 00:50:16.476 READ DMA EXT 25 00 00 01 00 00 00 00 a0 99 f0 e0 00 00:50:16.411 READ DMA EXT 25 00 00 01 00 00 00 00 a0 98 f0 e0 00 00:50:16.379 READ DMA EXT Error 1813 [12] occurred at disk power-on lifetime: 4664 hours (194 days + 8 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 00 82 c5 60 00 00 Error: UNC at LBA = 0x0082c560 = 8570208 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 08 00 00 00 82 c5 60 e0 00 00:50:16.485 READ DMA EXT 25 00 00 00 08 00 00 00 66 3f f8 e0 00 00:50:16.476 READ DMA EXT 25 00 00 01 00 00 00 00 a0 99 f0 e0 00 00:50:16.411 READ DMA EXT 25 00 00 01 00 00 00 00 a0 98 f0 e0 00 00:50:16.379 READ DMA EXT 25 00 00 00 08 00 00 00 a0 90 f8 e0 00 00:50:16.163 READ DMA EXT Error 1812 [11] occurred at disk power-on lifetime: 4664 hours (194 days + 8 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 00 a0 97 50 00 00 Error: UNC at LBA = 0x00a09750 = 10524496 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 01 00 00 00 00 a0 96 f0 e0 00 00:50:13.764 READ DMA EXT 25 00 00 01 00 00 00 00 a0 95 f0 e0 00 00:50:13.577 READ DMA EXT 25 00 00 01 00 00 00 00 a0 91 f0 e0 00 00:50:11.170 READ DMA EXT 25 00 00 01 00 00 00 00 a0 90 f0 e0 00 00:50:11.113 READ DMA EXT 25 00 00 00 08 00 00 00 a0 88 f8 e0 00 00:50:11.076 READ DMA EXT Error 1811 [10] occurred at disk power-on lifetime: 4664 hours (194 days + 8 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 00 a0 95 48 00 00 Error: UNC at LBA = 0x00a09548 = 10523976 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 01 00 00 00 00 a0 91 f0 e0 00 00:50:11.170 READ DMA EXT 25 00 00 01 00 00 00 00 a0 90 f0 e0 00 00:50:11.113 READ DMA EXT 25 00 00 00 08 00 00 00 a0 88 f8 e0 00 00:50:11.076 READ DMA EXT 25 00 00 00 08 00 00 00 a0 88 f0 e0 00 00:50:10.916 READ DMA EXT 25 00 00 01 00 00 00 00 a0 8a f0 e0 00 00:50:08.604 READ DMA EXT Error 1810 [9] occurred at disk power-on lifetime: 4664 hours (194 days + 8 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 00 a0 90 a0 00 00 Error: UNC at LBA = 0x00a090a0 = 10522784 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 01 00 00 00 00 a0 8a f0 e0 00 00:50:08.604 READ DMA EXT 25 00 00 01 00 00 00 00 a0 89 f0 e0 00 00:50:08.580 READ DMA EXT 25 00 00 01 00 00 00 00 a0 88 f0 e0 00 00:50:08.578 READ DMA EXT 25 00 00 00 08 00 00 04 46 50 58 e0 00 00:50:08.361 READ DMA EXT 25 00 00 00 08 00 00 04 46 50 50 e0 00 00:50:08.347 READ DMA EXT Error 1809 [8] occurred at disk power-on lifetime: 4664 hours (194 days + 8 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 00 a0 83 28 00 00 Error: UNC at LBA = 0x00a08328 = 10519336 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 01 00 00 00 00 a0 82 f0 e0 00 00:50:05.784 READ DMA EXT 25 00 00 01 00 00 00 00 a0 81 f0 e0 00 00:50:03.363 READ DMA EXT 25 00 00 01 00 00 00 04 46 50 50 e0 00 00:50:03.361 READ DMA EXT 25 00 00 01 00 00 00 04 46 4c 50 e0 00 00:50:03.104 READ DMA EXT 25 00 00 01 00 00 00 04 46 4b 50 e0 00 00:50:02.828 READ DMA EXT Error 1808 [7] occurred at disk power-on lifetime: 4664 hours (194 days + 8 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 00 a0 82 58 00 00 Error: UNC at LBA = 0x00a08258 = 10519128 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 01 00 00 00 00 a0 81 f0 e0 00 00:50:03.363 READ DMA EXT 25 00 00 01 00 00 00 04 46 50 50 e0 00 00:50:03.361 READ DMA EXT 25 00 00 01 00 00 00 04 46 4c 50 e0 00 00:50:03.104 READ DMA EXT 25 00 00 01 00 00 00 04 46 4b 50 e0 00 00:50:02.828 READ DMA EXT 25 00 00 01 00 00 00 04 46 4a 50 e0 00 00:50:02.705 READ DMA EXT Error 1807 [6] occurred at disk power-on lifetime: 4664 hours (194 days + 8 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 00 82 c5 60 00 00 Error: UNC at LBA = 0x0082c560 = 8570208 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 08 00 00 00 82 c5 60 e0 00 00:46:44.474 READ DMA EXT 25 00 00 00 08 00 00 00 82 c5 60 e0 00 00:46:42.178 READ DMA EXT 25 00 00 00 08 00 00 00 66 3f f8 e0 00 00:46:42.170 READ DMA EXT 25 00 00 01 00 00 00 00 a0 99 f0 e0 00 00:46:42.104 READ DMA EXT 25 00 00 01 00 00 00 00 a0 98 f0 e0 00 00:46:41.978 READ DMA EXT SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Aborted by host 90% 1956 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 522 (0x020a) Device State: Active (0) Current Temperature: 23 Celsius Power Cycle Min/Max Temperature: 22/25 Celsius Lifetime Min/Max Temperature: 16/58 Celsius Under/Over Temperature Limit Count: 0/34 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/ 0 Celsius Min/Max Temperature Limit: 0/ 0 Celsius Temperature History Size (Index): 128 (29) Index Estimated Time Temperature Celsius 30 2024-01-18 14:33 38 ******************* 31 2024-01-18 14:34 38 ******************* 32 2024-01-18 14:35 39 ******************** ... ..( 5 skipped). .. ******************** 38 2024-01-18 14:41 39 ******************** 39 2024-01-18 14:42 40 ********************* ... ..( 9 skipped). .. ********************* 49 2024-01-18 14:52 40 ********************* 50 2024-01-18 14:53 39 ******************** ... ..( 4 skipped). .. ******************** 55 2024-01-18 14:58 39 ******************** 56 2024-01-18 14:59 ? - 57 2024-01-18 15:00 25 ****** 58 2024-01-18 15:01 26 ******* 59 2024-01-18 15:02 27 ******** 60 2024-01-18 15:03 28 ********* 61 2024-01-18 15:04 29 ********** 62 2024-01-18 15:05 29 ********** 63 2024-01-18 15:06 30 *********** 64 2024-01-18 15:07 31 ************ 65 2024-01-18 15:08 31 ************ 66 2024-01-18 15:09 32 ************* 67 2024-01-18 15:10 32 ************* 68 2024-01-18 15:11 33 ************** ... ..( 3 skipped). .. ************** 72 2024-01-18 15:15 33 ************** 73 2024-01-18 15:16 34 *************** 74 2024-01-18 15:17 34 *************** 75 2024-01-18 15:18 35 **************** 76 2024-01-18 15:19 35 **************** 77 2024-01-18 15:20 36 ***************** 78 2024-01-18 15:21 36 ***************** 79 2024-01-18 15:22 36 ***************** 80 2024-01-18 15:23 37 ****************** ... ..( 3 skipped). .. ****************** 84 2024-01-18 15:27 37 ****************** 85 2024-01-18 15:28 38 ******************* ... ..( 26 skipped). .. ******************* 112 2024-01-18 15:55 38 ******************* 113 2024-01-18 15:56 ? - 114 2024-01-18 15:57 19 - 115 2024-01-18 15:58 ? - 116 2024-01-18 15:59 21 ** 117 2024-01-18 16:00 ? - 118 2024-01-18 16:01 22 *** 119 2024-01-18 16:02 23 **** 120 2024-01-18 16:03 ? - 121 2024-01-18 16:04 21 ** 122 2024-01-18 16:05 22 *** 123 2024-01-18 16:06 ? - 124 2024-01-18 16:07 22 *** 125 2024-01-18 16:08 24 ***** ... ..( 7 skipped). .. ***** 5 2024-01-18 16:16 24 ***** 6 2024-01-18 16:17 25 ****** 7 2024-01-18 16:18 24 ***** ... ..( 15 skipped). .. ***** 23 2024-01-18 16:34 24 ***** 24 2024-01-18 16:35 23 **** ... ..( 4 skipped). .. **** 29 2024-01-18 16:40 23 **** SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x000a 2 2 Device-to-host register FISes sent due to a COMRESET 0x0001 2 0 Command failed due to ICRC error 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS