Probe #927b789702 of Gigabyte B75-D3V Desktop Computer

Log: smartctl

/dev/sda === START OF INFORMATION SECTION === Model Family: Western Digital Blue Device Model: WDC WD10EZEX-08WN4A0 Serial Number: -- LU WWN Device Id: 5 0014ee ... Firmware Version: 01.01A01 User Capacity: 1 000 204 886 016 bytes [1,00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 7200 rpm Form Factor: 3.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-3 T13/2161-D revision 3b SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Mon May 29 12:43:05 2017 +05 SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (10920) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 114) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x3035) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 3 Spin_Up_Time POS--K 174 173 021 - 2300 4 Start_Stop_Count -O--CK 100 100 000 - 83 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 9 Power_On_Hours -O--CK 100 100 000 - 318 10 Spin_Retry_Count -O--CK 100 253 000 - 0 11 Calibration_Retry_Count -O--CK 100 253 000 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 80 192 Power-Off_Retract_Count -O--CK 200 200 000 - 12 193 Load_Cycle_Count -O--CK 200 200 000 - 81 194 Temperature_Celsius -O---K 106 100 000 - 37 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 0 198 Offline_Uncorrectable ----CK 200 200 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 SATA NCQ Queued Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb6 GPL,SL VS 1 Device vendor specific log 0xb7 GPL,SL VS 48 Device vendor specific log 0xbd GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 93 Device vendor specific log 0xdf GPL,SL VS 1 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 258 (0x0102) SCT Support Level: 1 Device State: Active (0) Current Temperature: 37 Celsius Power Cycle Min/Max Temperature: 28/37 Celsius Lifetime Min/Max Temperature: 28/43 Celsius Under/Over Temperature Limit Count: 0/0 Vendor specific: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 478 (79) Index Estimated Time Temperature Celsius 80 2017-05-29 04:46 40 ********************* ... ..( 34 skipped). .. ********************* 115 2017-05-29 05:21 40 ********************* 116 2017-05-29 05:22 ? - 117 2017-05-29 05:23 28 ********* 118 2017-05-29 05:24 28 ********* 119 2017-05-29 05:25 28 ********* 120 2017-05-29 05:26 29 ********** 121 2017-05-29 05:27 30 *********** 122 2017-05-29 05:28 30 *********** 123 2017-05-29 05:29 31 ************ 124 2017-05-29 05:30 32 ************* 125 2017-05-29 05:31 32 ************* 126 2017-05-29 05:32 33 ************** 127 2017-05-29 05:33 33 ************** 128 2017-05-29 05:34 34 *************** 129 2017-05-29 05:35 34 *************** 130 2017-05-29 05:36 35 **************** 131 2017-05-29 05:37 35 **************** 132 2017-05-29 05:38 36 ***************** 133 2017-05-29 05:39 36 ***************** 134 2017-05-29 05:40 36 ***************** 135 2017-05-29 05:41 37 ****************** 136 2017-05-29 05:42 37 ****************** 137 2017-05-29 05:43 37 ****************** 138 2017-05-29 05:44 38 ******************* ... ..( 2 skipped). .. ******************* 141 2017-05-29 05:47 38 ******************* 142 2017-05-29 05:48 39 ******************** ... ..( 3 skipped). .. ******************** 146 2017-05-29 05:52 39 ******************** 147 2017-05-29 05:53 40 ********************* ... ..( 4 skipped). .. ********************* 152 2017-05-29 05:58 40 ********************* 153 2017-05-29 05:59 41 ********************** ... ..( 8 skipped). .. ********************** 162 2017-05-29 06:08 41 ********************** 163 2017-05-29 06:09 42 *********************** ... ..( 27 skipped). .. *********************** 191 2017-05-29 06:37 42 *********************** 192 2017-05-29 06:38 43 ************************ ... ..( 20 skipped). .. ************************ 213 2017-05-29 06:59 43 ************************ 214 2017-05-29 07:00 ? - 215 2017-05-29 07:01 28 ********* 216 2017-05-29 07:02 28 ********* 217 2017-05-29 07:03 28 ********* 218 2017-05-29 07:04 29 ********** 219 2017-05-29 07:05 30 *********** 220 2017-05-29 07:06 30 *********** 221 2017-05-29 07:07 ? - 222 2017-05-29 07:08 29 ********** 223 2017-05-29 07:09 29 ********** 224 2017-05-29 07:10 29 ********** 225 2017-05-29 07:11 ? - 226 2017-05-29 07:12 31 ************ 227 2017-05-29 07:13 ? - 228 2017-05-29 07:14 30 *********** 229 2017-05-29 07:15 29 ********** 230 2017-05-29 07:16 29 ********** 231 2017-05-29 07:17 30 *********** 232 2017-05-29 07:18 31 ************ 233 2017-05-29 07:19 31 ************ 234 2017-05-29 07:20 31 ************ 235 2017-05-29 07:21 32 ************* 236 2017-05-29 07:22 34 *************** 237 2017-05-29 07:23 34 *************** 238 2017-05-29 07:24 34 *************** 239 2017-05-29 07:25 35 **************** ... ..( 3 skipped). .. **************** 243 2017-05-29 07:29 35 **************** 244 2017-05-29 07:30 36 ***************** ... ..( 3 skipped). .. ***************** 248 2017-05-29 07:34 36 ***************** 249 2017-05-29 07:35 37 ****************** 250 2017-05-29 07:36 37 ****************** 251 2017-05-29 07:37 36 ***************** ... ..( 3 skipped). .. ***************** 255 2017-05-29 07:41 36 ***************** 256 2017-05-29 07:42 38 ******************* ... ..( 6 skipped). .. ******************* 263 2017-05-29 07:49 38 ******************* 264 2017-05-29 07:50 39 ******************** ... ..( 8 skipped). .. ******************** 273 2017-05-29 07:59 39 ******************** 274 2017-05-29 08:00 38 ******************* ... ..( 5 skipped). .. ******************* 280 2017-05-29 08:06 38 ******************* 281 2017-05-29 08:07 39 ******************** ... ..( 9 skipped). .. ******************** 291 2017-05-29 08:17 39 ******************** 292 2017-05-29 08:18 ? - 293 2017-05-29 08:19 40 ********************* ... ..( 3 skipped). .. ********************* 297 2017-05-29 08:23 40 ********************* 298 2017-05-29 08:24 ? - 299 2017-05-29 08:25 40 ********************* ... ..( 15 skipped). .. ********************* 315 2017-05-29 08:41 40 ********************* 316 2017-05-29 08:42 41 ********************** ... ..( 9 skipped). .. ********************** 326 2017-05-29 08:52 41 ********************** 327 2017-05-29 08:53 ? - 328 2017-05-29 08:54 42 *********************** ... ..( 6 skipped). .. *********************** 335 2017-05-29 09:01 42 *********************** 336 2017-05-29 09:02 43 ************************ 337 2017-05-29 09:03 42 *********************** 338 2017-05-29 09:04 42 *********************** 339 2017-05-29 09:05 41 ********************** 340 2017-05-29 09:06 40 ********************* 341 2017-05-29 09:07 ? - 342 2017-05-29 09:08 40 ********************* 343 2017-05-29 09:09 40 ********************* 344 2017-05-29 09:10 39 ******************** 345 2017-05-29 09:11 39 ******************** 346 2017-05-29 09:12 39 ******************** 347 2017-05-29 09:13 38 ******************* 348 2017-05-29 09:14 38 ******************* 349 2017-05-29 09:15 38 ******************* 350 2017-05-29 09:16 37 ****************** 351 2017-05-29 09:17 37 ****************** 352 2017-05-29 09:18 37 ****************** 353 2017-05-29 09:19 ? - 354 2017-05-29 09:20 37 ****************** 355 2017-05-29 09:21 36 ***************** 356 2017-05-29 09:22 36 ***************** 357 2017-05-29 09:23 36 ***************** 358 2017-05-29 09:24 37 ****************** 359 2017-05-29 09:25 38 ******************* 360 2017-05-29 09:26 38 ******************* 361 2017-05-29 09:27 38 ******************* 362 2017-05-29 09:28 37 ****************** 363 2017-05-29 09:29 37 ****************** 364 2017-05-29 09:30 37 ****************** 365 2017-05-29 09:31 36 ***************** ... ..( 2 skipped). .. ***************** 368 2017-05-29 09:34 36 ***************** 369 2017-05-29 09:35 35 **************** ... ..( 4 skipped). .. **************** 374 2017-05-29 09:40 35 **************** 375 2017-05-29 09:41 ? - 376 2017-05-29 09:42 35 **************** 377 2017-05-29 09:43 34 *************** 378 2017-05-29 09:44 34 *************** 379 2017-05-29 09:45 34 *************** 380 2017-05-29 09:46 35 **************** 381 2017-05-29 09:47 35 **************** 382 2017-05-29 09:48 35 **************** 383 2017-05-29 09:49 36 ***************** 384 2017-05-29 09:50 37 ****************** ... ..( 4 skipped). .. ****************** 389 2017-05-29 09:55 37 ****************** 390 2017-05-29 09:56 38 ******************* ... ..( 5 skipped). .. ******************* 396 2017-05-29 10:02 38 ******************* 397 2017-05-29 10:03 39 ******************** ... ..( 6 skipped). .. ******************** 404 2017-05-29 10:10 39 ******************** 405 2017-05-29 10:11 40 ********************* ... ..( 16 skipped). .. ********************* 422 2017-05-29 10:28 40 ********************* 423 2017-05-29 10:29 39 ******************** ... ..( 13 skipped). .. ******************** 437 2017-05-29 10:43 39 ******************** 438 2017-05-29 10:44 40 ********************* ... ..( 3 skipped). .. ********************* 442 2017-05-29 10:48 40 ********************* 443 2017-05-29 10:49 39 ******************** ... ..( 4 skipped). .. ******************** 448 2017-05-29 10:54 39 ******************** 449 2017-05-29 10:55 40 ********************* ... ..( 11 skipped). .. ********************* 461 2017-05-29 11:07 40 ********************* 462 2017-05-29 11:08 39 ******************** ... ..( 21 skipped). .. ******************** 6 2017-05-29 11:30 39 ******************** 7 2017-05-29 11:31 40 ********************* ... ..( 6 skipped). .. ********************* 14 2017-05-29 11:38 40 ********************* 15 2017-05-29 11:39 41 ********************** ... ..( 13 skipped). .. ********************** 29 2017-05-29 11:53 41 ********************** 30 2017-05-29 11:54 42 *********************** ... ..( 4 skipped). .. *********************** 35 2017-05-29 11:59 42 *********************** 36 2017-05-29 12:00 ? - 37 2017-05-29 12:01 28 ********* 38 2017-05-29 12:02 28 ********* 39 2017-05-29 12:03 28 ********* 40 2017-05-29 12:04 29 ********** 41 2017-05-29 12:05 29 ********** 42 2017-05-29 12:06 29 ********** 43 2017-05-29 12:07 30 *********** 44 2017-05-29 12:08 32 ************* 45 2017-05-29 12:09 32 ************* 46 2017-05-29 12:10 32 ************* 47 2017-05-29 12:11 33 ************** 48 2017-05-29 12:12 33 ************** 49 2017-05-29 12:13 33 ************** 50 2017-05-29 12:14 34 *************** ... ..( 4 skipped). .. *************** 55 2017-05-29 12:19 34 *************** 56 2017-05-29 12:20 35 **************** ... ..( 6 skipped). .. **************** 63 2017-05-29 12:27 35 **************** 64 2017-05-29 12:28 36 ***************** ... ..( 8 skipped). .. ***************** 73 2017-05-29 12:37 36 ***************** 74 2017-05-29 12:38 37 ****************** ... ..( 4 skipped). .. ****************** 79 2017-05-29 12:43 37 ****************** SCT Error Recovery Control command not supported Device Statistics (GP/SMART Log 0x04) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 1 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 2 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x8000 4 2602 Vendor specific /dev/sdb === START OF INFORMATION SECTION === Model Family: Western Digital Scorpio Blue Serial ATA Device Model: WDC WD2500BEVT-22ZCT0 Serial Number: -- LU WWN Device Id: 5 0014ee ... Firmware Version: 11.01A11 User Capacity: 250 059 350 016 bytes [250 GB] Sector Size: 512 bytes logical/physical Rotation Rate: 5400 rpm Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS (minor revision not indicated) SATA Version is: SATA 2.5, 3.0 Gb/s Local Time is: Mon May 29 12:43:05 2017 +05 SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Disabled APM level is: 128 (minimum power consumption without standby) Rd look-ahead is: Enabled Write cache is: Enabled ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x80) Offline data collection activity was never started. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 8400) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 100) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x303f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 516 3 Spin_Up_Time POS--K 186 184 021 - 1691 4 Start_Stop_Count -O--CK 098 098 000 - 2200 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-K 100 253 000 - 0 9 Power_On_Hours -O--CK 097 097 000 - 2761 10 Spin_Retry_Count PO--CK 100 100 051 - 0 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 12 Power_Cycle_Count -O--CK 099 099 000 - 1845 192 Power-Off_Retract_Count -O--CK 200 200 000 - 327 193 Load_Cycle_Count -O--CK 187 187 000 - 41584 194 Temperature_Celsius -O---K 112 088 000 - 35 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 0 198 Offline_Uncorrectable ----CK 100 253 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 200 Multi_Zone_Error_Rate P--R-- 100 253 051 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 SATA NCQ Queued Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb7 GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 24 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) Device Error Count: 516 (device log contains only the most recent 24 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 516 [11] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 00 01 08 00 51 00 00 e0 01 00 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 00 68 25 00 5d 00 00 00 00 00 00 00 0e 00:00:00.000 NOP [Reserved subcommand] [OBS-ACS-2] 00 08 00 00 10 00 98 0e 4f 25 00 00 00 00:00:04.104 NOP [Abort queued commands] 0e 4f 25 00 34 00 08 00 10 00 00 00 0e 00:00:16.962 [RESERVED] 00 08 00 00 10 00 f8 0e 26 25 00 00 00 00:00:04.104 NOP [Abort queued commands] Error 515 [10] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 00 01 08 00 51 00 00 e0 01 00 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 00 98 25 00 4f 00 00 00 00 00 00 00 0e 00:00:00.000 NOP [Reserved subcommand] [OBS-ACS-2] 00 08 00 00 10 00 42 0e 42 25 00 00 00 00:00:04.104 NOP [Abort queued commands] 0e f8 25 00 26 00 08 00 10 00 00 00 0e 00:00:13.391 [RESERVED] 00 08 00 00 10 00 a3 0e 19 25 00 00 00 00:00:04.104 NOP [Abort queued commands] Error 514 [9] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 00 01 08 00 51 00 00 e0 01 00 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 00 42 25 00 42 00 00 00 00 00 00 00 0e 00:00:00.000 NOP [Reserved subcommand] [OBS-ACS-2] 00 08 00 00 10 00 4f 0e 34 25 00 00 00 00:00:04.104 NOP [Abort queued commands] 0e a3 25 00 19 00 08 00 10 00 00 00 0e 00:00:09.976 [RESERVED] 00 08 00 00 90 00 a2 00 19 25 00 00 00 00:00:04.104 NOP [Abort queued commands] Error 513 [8] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 00 01 08 00 51 00 00 e0 01 00 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 00 4f 25 00 34 00 00 00 00 00 00 00 0e 00:00:00.000 NOP [Reserved subcommand] [OBS-ACS-2] 00 08 00 00 10 00 f8 0e 26 25 00 00 00 00:00:04.104 NOP [Abort queued commands] 0e a2 25 00 19 00 08 00 10 00 00 00 00 00:00:06.563 [RESERVED] 00 08 00 00 08 00 a1 0e 19 25 00 00 00 00:00:36.872 NOP [Abort queued commands] Error 512 [7] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 00 01 08 00 51 00 00 e0 01 00 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 00 f8 25 00 26 00 00 00 00 00 00 00 0e 00:00:00.000 NOP [Reserved subcommand] [OBS-ACS-2] 00 08 00 00 10 00 a3 0e 19 25 00 00 00 00:00:04.104 NOP [Abort queued commands] 00 a1 25 00 19 00 08 00 90 00 00 00 0e 00:00:06.562 NOP [Reserved subcommand] [OBS-ACS-2] 00 08 00 00 88 00 9f 00 19 25 00 00 00 00:00:02.056 NOP [Abort queued commands] Error 511 [6] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 00 01 08 00 51 00 00 e0 01 00 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 00 a3 25 00 19 00 00 00 00 00 00 00 0e 00:00:00.000 NOP [Reserved subcommand] [OBS-ACS-2] 00 08 00 00 90 00 a2 00 19 25 00 00 00 00:00:04.104 NOP [Abort queued commands] 0e 9f 25 00 19 00 08 00 08 00 00 00 00 00:00:06.561 [RESERVED] 00 08 00 00 00 00 9e 0e 19 25 00 00 00 00:00:34.824 NOP [Abort queued commands] Error 510 [5] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 00 01 08 00 51 00 00 e0 01 00 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 00 1b 25 00 5a 00 00 00 00 00 00 00 0e 00:00:00.000 NOP [Reserved subcommand] [OBS-ACS-2] 00 08 00 00 10 00 72 0e 4d 25 00 00 00 00:00:04.104 NOP [Abort queued commands] 0e 4b 25 00 32 00 08 00 10 00 00 00 0e 00:00:16.405 [RESERVED] 00 08 00 00 10 00 63 0e 24 25 00 00 00 00:00:04.104 NOP [Abort queued commands] Error 509 [4] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 00 01 08 00 51 00 00 e0 01 00 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 00 72 25 00 4d 00 00 00 00 00 00 00 0e 00:00:00.000 NOP [Reserved subcommand] [OBS-ACS-2] 00 08 00 00 10 00 15 0e 40 25 00 00 00 00:00:04.104 NOP [Abort queued commands] 0e 63 25 00 24 00 08 00 10 00 00 00 0e 00:00:12.875 [RESERVED] 00 08 00 00 10 00 db 0e 17 25 00 00 00 00:00:04.104 NOP [Abort queued commands] SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 2 SCT Version (vendor specific): 258 (0x0102) SCT Support Level: 1 Device State: Active (0) Current Temperature: 35 Celsius Power Cycle Min/Max Temperature: 25/35 Celsius Lifetime Min/Max Temperature: 27/59 Celsius Under/Over Temperature Limit Count: 0/0 Vendor specific: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: 1/85 Celsius Temperature History Size (Index): 128 (36) Index Estimated Time Temperature Celsius 37 2017-05-29 10:36 37 ****************** 38 2017-05-29 10:37 38 ******************* 39 2017-05-29 10:38 38 ******************* 40 2017-05-29 10:39 38 ******************* 41 2017-05-29 10:40 39 ******************** 42 2017-05-29 10:41 39 ******************** 43 2017-05-29 10:42 39 ******************** 44 2017-05-29 10:43 40 ********************* 45 2017-05-29 10:44 40 ********************* 46 2017-05-29 10:45 39 ******************** 47 2017-05-29 10:46 39 ******************** 48 2017-05-29 10:47 38 ******************* 49 2017-05-29 10:48 38 ******************* 50 2017-05-29 10:49 39 ******************** ... ..( 3 skipped). .. ******************** 54 2017-05-29 10:53 39 ******************** 55 2017-05-29 10:54 38 ******************* ... ..( 3 skipped). .. ******************* 59 2017-05-29 10:58 38 ******************* 60 2017-05-29 10:59 37 ****************** ... ..( 8 skipped). .. ****************** 69 2017-05-29 11:08 37 ****************** 70 2017-05-29 11:09 36 ***************** 71 2017-05-29 11:10 36 ***************** 72 2017-05-29 11:11 36 ***************** 73 2017-05-29 11:12 37 ****************** ... ..( 46 skipped). .. ****************** 120 2017-05-29 11:59 37 ****************** 121 2017-05-29 12:00 ? - 122 2017-05-29 12:01 25 ****** 123 2017-05-29 12:02 27 ******** 124 2017-05-29 12:03 28 ********* 125 2017-05-29 12:04 29 ********** 126 2017-05-29 12:05 29 ********** 127 2017-05-29 12:06 30 *********** 0 2017-05-29 12:07 31 ************ 1 2017-05-29 12:08 31 ************ 2 2017-05-29 12:09 31 ************ 3 2017-05-29 12:10 32 ************* ... ..( 4 skipped). .. ************* 8 2017-05-29 12:15 32 ************* 9 2017-05-29 12:16 33 ************** ... ..( 6 skipped). .. ************** 16 2017-05-29 12:23 33 ************** 17 2017-05-29 12:24 34 *************** ... ..( 2 skipped). .. *************** 20 2017-05-29 12:27 34 *************** 21 2017-05-29 12:28 35 **************** ... ..( 14 skipped). .. **************** 36 2017-05-29 12:43 35 **************** SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x000a 2 2 Device-to-host register FISes sent due to a COMRESET 0x8000 4 2602 Vendor specific


Hardware for Linux and BSD

GitHub