/dev/sda smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.15.0-46-generic] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital AV-GP (AF) Device Model: WDC WD20EURX-57T0FY0 Serial Number: -- LU WWN Device Id: 5 0014ee ... Firmware Version: 80.00A80 User Capacity: 2,000,398,934,016 bytes [2.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5400 rpm Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-2 (minor revision not indicated) SATA Version is: SATA 3.0, 3.0 Gb/s (current: 3.0 Gb/s) Local Time is: Sun Aug 14 22:08:12 2022 EDT SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 25) The self-test routine was aborted by the host. Total time to complete Offline data collection: (27540) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 278) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x7035) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 3 Spin_Up_Time POS--K 173 170 021 - 4341 4 Start_Stop_Count -O--CK 098 098 000 - 2035 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 9 Power_On_Hours -O--CK 095 095 000 - 3956 10 Spin_Retry_Count -O--CK 100 100 000 - 0 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 12 Power_Cycle_Count -O--CK 099 099 000 - 1575 192 Power-Off_Retract_Count -O--CK 200 200 000 - 124 193 Load_Cycle_Count -O--CK 200 200 000 - 1910 194 Temperature_Celsius -O---K 123 120 000 - 24 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 0 198 Offline_Uncorrectable ----CK 100 253 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 1 200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x21 GPL R/O 1 Write stream error log 0x22 GPL R/O 1 Read stream error log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb7 GPL,SL VS 1 Device vendor specific log 0xbd GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 93 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) Device Error Count: 22993 (device log contains only the most recent 24 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 22993 [0] occurred at disk power-on lifetime: 2737 hours (114 days + 1 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- 61 00 02 00 00 00 00 00 00 a0 00 Device Fault; Error: ABRT Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- ef 00 10 00 02 00 00 00 00 00 00 a0 00 00:16:04.933 SET FEATURES [Enable SATA feature] ec 00 00 00 00 00 00 00 00 00 00 a0 00 00:16:04.933 IDENTIFY DEVICE ef 00 03 00 46 00 00 00 00 00 00 a0 00 00:16:04.933 SET FEATURES [Set transfer mode] ef 00 10 00 02 00 00 00 00 00 00 a0 00 00:16:04.933 SET FEATURES [Enable SATA feature] ec 00 00 00 00 00 00 00 00 00 00 a0 00 00:16:04.932 IDENTIFY DEVICE Error 22992 [23] occurred at disk power-on lifetime: 2737 hours (114 days + 1 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- 61 00 46 00 00 00 00 00 00 a0 00 Device Fault; Error: ABRT Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- ef 00 03 00 46 00 00 00 00 00 00 a0 00 00:16:04.933 SET FEATURES [Set transfer mode] ef 00 10 00 02 00 00 00 00 00 00 a0 00 00:16:04.933 SET FEATURES [Enable SATA feature] ec 00 00 00 00 00 00 00 00 00 00 a0 00 00:16:04.932 IDENTIFY DEVICE c8 00 00 00 08 00 00 01 73 9b 00 e1 00 00:16:04.918 READ DMA ef 00 10 00 02 00 00 00 00 00 00 a0 00 00:16:04.917 SET FEATURES [Enable SATA feature] Error 22991 [22] occurred at disk power-on lifetime: 2737 hours (114 days + 1 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- 61 00 02 00 00 00 00 00 00 a0 00 Device Fault; Error: ABRT Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- ef 00 10 00 02 00 00 00 00 00 00 a0 00 00:16:04.933 SET FEATURES [Enable SATA feature] ec 00 00 00 00 00 00 00 00 00 00 a0 00 00:16:04.932 IDENTIFY DEVICE c8 00 00 00 08 00 00 01 73 9b 00 e1 00 00:16:04.918 READ DMA ef 00 10 00 02 00 00 00 00 00 00 a0 00 00:16:04.917 SET FEATURES [Enable SATA feature] ec 00 00 00 00 00 00 00 00 00 00 a0 00 00:16:04.917 IDENTIFY DEVICE Error 22990 [21] occurred at disk power-on lifetime: 2737 hours (114 days + 1 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- 61 00 08 00 00 01 73 9b 00 e1 00 Device Fault; Error: ABRT 8 sectors at LBA = 0x01739b00 = 24353536 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- c8 00 00 00 08 00 00 01 73 9b 00 e1 00 00:16:04.918 READ DMA ef 00 10 00 02 00 00 00 00 00 00 a0 00 00:16:04.917 SET FEATURES [Enable SATA feature] ec 00 00 00 00 00 00 00 00 00 00 a0 00 00:16:04.917 IDENTIFY DEVICE ef 00 03 00 46 00 00 00 00 00 00 a0 00 00:16:04.917 SET FEATURES [Set transfer mode] ef 00 10 00 02 00 00 00 00 00 00 a0 00 00:16:04.917 SET FEATURES [Enable SATA feature] Error 22989 [20] occurred at disk power-on lifetime: 2737 hours (114 days + 1 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- 61 00 02 00 00 00 00 00 00 a0 00 Device Fault; Error: ABRT Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- ef 00 10 00 02 00 00 00 00 00 00 a0 00 00:16:04.917 SET FEATURES [Enable SATA feature] ec 00 00 00 00 00 00 00 00 00 00 a0 00 00:16:04.917 IDENTIFY DEVICE ef 00 03 00 46 00 00 00 00 00 00 a0 00 00:16:04.917 SET FEATURES [Set transfer mode] ef 00 10 00 02 00 00 00 00 00 00 a0 00 00:16:04.917 SET FEATURES [Enable SATA feature] ec 00 00 00 00 00 00 00 00 00 00 a0 00 00:16:04.916 IDENTIFY DEVICE Error 22988 [19] occurred at disk power-on lifetime: 2737 hours (114 days + 1 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- 61 00 46 00 00 00 00 00 00 a0 00 Device Fault; Error: ABRT Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- ef 00 03 00 46 00 00 00 00 00 00 a0 00 00:16:04.917 SET FEATURES [Set transfer mode] ef 00 10 00 02 00 00 00 00 00 00 a0 00 00:16:04.917 SET FEATURES [Enable SATA feature] ec 00 00 00 00 00 00 00 00 00 00 a0 00 00:16:04.916 IDENTIFY DEVICE c8 00 00 00 08 00 00 01 73 9b 00 e1 00 00:16:04.898 READ DMA ef 00 10 00 02 00 00 00 00 00 00 a0 00 00:16:04.897 SET FEATURES [Enable SATA feature] Error 22987 [18] occurred at disk power-on lifetime: 2737 hours (114 days + 1 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- 61 00 02 00 00 00 00 00 00 a0 00 Device Fault; Error: ABRT Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- ef 00 10 00 02 00 00 00 00 00 00 a0 00 00:16:04.917 SET FEATURES [Enable SATA feature] ec 00 00 00 00 00 00 00 00 00 00 a0 00 00:16:04.916 IDENTIFY DEVICE c8 00 00 00 08 00 00 01 73 9b 00 e1 00 00:16:04.898 READ DMA ef 00 10 00 02 00 00 00 00 00 00 a0 00 00:16:04.897 SET FEATURES [Enable SATA feature] ec 00 00 00 00 00 00 00 00 00 00 a0 00 00:16:04.897 IDENTIFY DEVICE Error 22986 [17] occurred at disk power-on lifetime: 2737 hours (114 days + 1 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- 61 00 08 00 00 01 73 9b 00 e1 00 Device Fault; Error: ABRT 8 sectors at LBA = 0x01739b00 = 24353536 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- c8 00 00 00 08 00 00 01 73 9b 00 e1 00 00:16:04.898 READ DMA ef 00 10 00 02 00 00 00 00 00 00 a0 00 00:16:04.897 SET FEATURES [Enable SATA feature] ec 00 00 00 00 00 00 00 00 00 00 a0 00 00:16:04.897 IDENTIFY DEVICE ef 00 03 00 46 00 00 00 00 00 00 a0 00 00:16:04.897 SET FEATURES [Set transfer mode] ef 00 10 00 02 00 00 00 00 00 00 a0 00 00:16:04.897 SET FEATURES [Enable SATA feature] SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Aborted by host 90% 3956 - # 2 Short offline Completed without error 00% 2583 - # 3 Extended offline Aborted by host 90% 2562 - # 4 Extended offline Completed without error 00% 1083 - # 5 Conveyance offline Aborted by host 90% 1078 - # 6 Extended offline Aborted by host 90% 1078 - # 7 Short offline Completed without error 00% 1075 - # 8 Extended offline Aborted by host 90% 1075 - # 9 Short offline Completed without error 00% 1074 - #10 Extended offline Interrupted (host reset) 90% 1074 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 258 (0x0102) Device State: Active (0) Current Temperature: 24 Celsius Power Cycle Min/Max Temperature: 23/24 Celsius Lifetime Min/Max Temperature: 17/27 Celsius Under/Over Temperature Limit Count: 0/0 Vendor specific: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 478 (347) Index Estimated Time Temperature Celsius 348 2022-08-14 14:11 24 ***** ... ..( 2 skipped). .. ***** 351 2022-08-14 14:14 24 ***** 352 2022-08-14 14:15 25 ****** ... ..( 10 skipped). .. ****** 363 2022-08-14 14:26 25 ****** 364 2022-08-14 14:27 26 ******* ... ..( 29 skipped). .. ******* 394 2022-08-14 14:57 26 ******* 395 2022-08-14 14:58 25 ****** ... ..( 4 skipped). .. ****** 400 2022-08-14 15:03 25 ****** 401 2022-08-14 15:04 24 ***** ... ..( 3 skipped). .. ***** 405 2022-08-14 15:08 24 ***** 406 2022-08-14 15:09 23 **** 407 2022-08-14 15:10 23 **** 408 2022-08-14 15:11 23 **** 409 2022-08-14 15:12 ? - 410 2022-08-14 15:13 23 **** 411 2022-08-14 15:14 ? - 412 2022-08-14 15:15 19 - 413 2022-08-14 15:16 19 - 414 2022-08-14 15:17 20 * 415 2022-08-14 15:18 21 ** 416 2022-08-14 15:19 21 ** 417 2022-08-14 15:20 21 ** 418 2022-08-14 15:21 22 *** 419 2022-08-14 15:22 22 *** 420 2022-08-14 15:23 22 *** 421 2022-08-14 15:24 23 **** 422 2022-08-14 15:25 23 **** 423 2022-08-14 15:26 23 **** 424 2022-08-14 15:27 24 ***** ... ..( 9 skipped). .. ***** 434 2022-08-14 15:37 24 ***** 435 2022-08-14 15:38 25 ****** ... ..( 10 skipped). .. ****** 446 2022-08-14 15:49 25 ****** 447 2022-08-14 15:50 26 ******* ... ..( 33 skipped). .. ******* 3 2022-08-14 16:24 26 ******* 4 2022-08-14 16:25 ? - 5 2022-08-14 16:26 19 - 6 2022-08-14 16:27 20 * 7 2022-08-14 16:28 21 ** ... ..( 2 skipped). .. ** 10 2022-08-14 16:31 21 ** 11 2022-08-14 16:32 ? - 12 2022-08-14 16:33 23 **** 13 2022-08-14 16:34 23 **** 14 2022-08-14 16:35 23 **** 15 2022-08-14 16:36 24 ***** ... ..( 95 skipped). .. ***** 111 2022-08-14 18:12 24 ***** 112 2022-08-14 18:13 ? - 113 2022-08-14 18:14 19 - 114 2022-08-14 18:15 19 - 115 2022-08-14 18:16 19 - 116 2022-08-14 18:17 20 * 117 2022-08-14 18:18 21 ** ... ..( 3 skipped). .. ** 121 2022-08-14 18:22 21 ** 122 2022-08-14 18:23 22 *** 123 2022-08-14 18:24 22 *** 124 2022-08-14 18:25 22 *** 125 2022-08-14 18:26 23 **** 126 2022-08-14 18:27 23 **** 127 2022-08-14 18:28 23 **** 128 2022-08-14 18:29 24 ***** ... ..( 12 skipped). .. ***** 141 2022-08-14 18:42 24 ***** 142 2022-08-14 18:43 25 ****** ... ..( 22 skipped). .. ****** 165 2022-08-14 19:06 25 ****** 166 2022-08-14 19:07 ? - 167 2022-08-14 19:08 22 *** 168 2022-08-14 19:09 22 *** 169 2022-08-14 19:10 22 *** 170 2022-08-14 19:11 23 **** 171 2022-08-14 19:12 23 **** 172 2022-08-14 19:13 23 **** 173 2022-08-14 19:14 24 ***** ... ..( 12 skipped). .. ***** 186 2022-08-14 19:27 24 ***** 187 2022-08-14 19:28 25 ****** ... ..( 92 skipped). .. ****** 280 2022-08-14 21:01 25 ****** 281 2022-08-14 21:02 ? - 282 2022-08-14 21:03 19 - 283 2022-08-14 21:04 20 * 284 2022-08-14 21:05 20 * 285 2022-08-14 21:06 21 ** ... ..( 2 skipped). .. ** 288 2022-08-14 21:09 21 ** 289 2022-08-14 21:10 22 *** 290 2022-08-14 21:11 22 *** 291 2022-08-14 21:12 22 *** 292 2022-08-14 21:13 23 **** ... ..( 3 skipped). .. **** 296 2022-08-14 21:17 23 **** 297 2022-08-14 21:18 24 ***** ... ..( 18 skipped). .. ***** 316 2022-08-14 21:37 24 ***** 317 2022-08-14 21:38 25 ****** ... ..( 11 skipped). .. ****** 329 2022-08-14 21:50 25 ****** 330 2022-08-14 21:51 ? - 331 2022-08-14 21:52 19 - 332 2022-08-14 21:53 19 - 333 2022-08-14 21:54 20 * 334 2022-08-14 21:55 21 ** 335 2022-08-14 21:56 21 ** 336 2022-08-14 21:57 21 ** 337 2022-08-14 21:58 22 *** 338 2022-08-14 21:59 22 *** 339 2022-08-14 22:00 23 **** ... ..( 2 skipped). .. **** 342 2022-08-14 22:03 23 **** 343 2022-08-14 22:04 24 ***** ... ..( 3 skipped). .. ***** 347 2022-08-14 22:08 24 ***** SCT Error Recovery Control command not supported Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 2 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 3 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x8000 4 454 Vendor specific /dev/sdb smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.15.0-46-generic] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: WD Blue and Green SSDs Device Model: WDC WDS500G2B0A-00SM50 Serial Number: -- LU WWN Device Id: 5 001b44 ... Firmware Version: 415020WD User Capacity: 500,107,862,016 bytes [500 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Form Factor: 2.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-4 T13/BSR INCITS 529 revision 5 SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Sun Aug 14 22:08:12 2022 EDT SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 254 (maximum performance) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Unavailable === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x11) SMART execute Offline immediate. No Auto Offline data collection support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. No Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 10) minutes. SMART Attributes Data Structure revision number: 4 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 5 Reallocated_Sector_Ct -O--CK 100 100 --- - 0 9 Power_On_Hours -O--CK 100 100 --- - 1359 12 Power_Cycle_Count -O--CK 100 100 --- - 429 165 Block_Erase_Count -O--CK 100 100 --- - 11927700 166 Minimum_PE_Cycles_TLC -O--CK 100 100 --- - 1 167 Max_Bad_Blocks_per_Die -O--CK 100 100 --- - 65 168 Maximum_PE_Cycles_TLC -O--CK 100 100 --- - 3 169 Total_Bad_Blocks -O--CK 100 100 --- - 280 170 Grown_Bad_Blocks -O--CK 100 100 --- - 0 171 Program_Fail_Count -O--CK 100 100 --- - 0 172 Erase_Fail_Count -O--CK 100 100 --- - 0 173 Average_PE_Cycles_TLC -O--CK 100 100 --- - 1 174 Unexpected_Power_Loss -O--CK 100 100 --- - 10 184 End-to-End_Error -O--CK 100 100 --- - 0 187 Reported_Uncorrect -O--CK 100 100 --- - 0 188 Command_Timeout -O--CK 100 100 --- - 0 194 Temperature_Celsius -O---K 075 031 --- - 25 (Min/Max 17/31) 199 UDMA_CRC_Error_Count -O--CK 100 100 --- - 0 230 Media_Wearout_Indicator -O--CK 001 001 --- - 0x001d000a001d 232 Available_Reservd_Space PO--CK 100 100 004 - 100 233 NAND_GB_Written_TLC -O--CK 100 100 --- - 523 234 NAND_GB_Written_SLC -O--CK 100 100 --- - 1105 241 Host_Writes_GiB ----CK 253 253 --- - 1001 242 Host_Reads_GiB ----CK 253 253 --- - 1290 244 Temp_Throttle_Status -O--CK 000 100 --- - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 2 Comprehensive SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 8 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x24 GPL R/O 1797 Current Device Internal Status Data log 0x25 GPL R/O 1797 Saved Device Internal Status Data log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xde GPL VS 8 Device vendor specific log SMART Extended Comprehensive Error Log Version: 1 (1 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] Selective Self-tests/Logging not supported SCT Commands not supported Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 429 --- Lifetime Power-On Resets 0x01 0x010 4 1359 --- Power-on Hours 0x01 0x018 6 2100132175 --- Logical Sectors Written 0x01 0x020 6 38511637 --- Number of Write Commands 0x01 0x028 6 2706907122 --- Logical Sectors Read 0x01 0x030 6 42686529 --- Number of Read Commands 0x07 ===== = = === == Solid State Device Statistics (rev 1) == 0x07 0x008 1 0 N-- Percentage Used Endurance Indicator |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 4 0 Command failed due to ICRC error 0x0002 4 0 R_ERR response for data FIS 0x0005 4 0 R_ERR response for non-data FIS 0x000a 4 3 Device-to-host register FISes sent due to a COMRESET