/dev/sda === START OF INFORMATION SECTION === Device Model: ADATA SU630 Serial Number: -- LU WWN Device Id: 0 000000 ... Firmware Version: V8X01c87 User Capacity: 240,057,409,536 bytes [240 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Form Factor: 2.5 inches Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ACS-3, ATA8-ACS T13/1699-D revision 6 SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Tue Jan 16 14:21:26 2024 UTC SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Disabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 1) seconds. Offline data collection capabilities: (0x59) SMART execute Offline immediate. No Auto Offline data collection support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0002) Does not save SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 7) minutes. Extended self-test routine recommended polling time: ( 23) minutes. SCT capabilities: (0x0039) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 100 100 050 - 0 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 1248 9 Power_On_Hours -O--CK 100 100 000 - 10590 12 Power_Cycle_Count -O--CK 100 100 000 - 9770 161 Unknown_Attribute -O--CK 100 100 000 - 55 162 Unknown_Attribute -O--CK 100 100 000 - 462583 163 Unknown_Attribute -O--CK 100 100 000 - 100 164 Unknown_Attribute -O--CK 100 100 000 - 328 166 Unknown_Attribute -O--CK 100 100 000 - 91 167 Unknown_Attribute -O--CK 100 100 050 - 0 168 Unknown_Attribute -O--CK 100 100 000 - 0 169 Unknown_Attribute -O--CK 100 100 000 - 100 171 Unknown_Attribute -O--CK 100 100 000 - 0 172 Unknown_Attribute -O--CK 100 100 000 - 0 174 Unknown_Attribute -O--CK 100 100 000 - 1337 175 Program_Fail_Count_Chip -O--CK 100 100 000 - 19 181 Program_Fail_Cnt_Total -O---K 100 100 000 - 64189929 187 Reported_Uncorrect -O--CK 100 100 000 - 19 194 Temperature_Celsius -O---K 100 100 030 - 42 195 Hardware_ECC_Recovered -O-RCK 100 100 000 - 285 196 Reallocated_Event_Count -O--CK 100 100 000 - 19 199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 19 206 Unknown_SSD_Attribute -O--CK 100 100 000 - 244 207 Unknown_SSD_Attribute -O--CK 100 100 000 - 393 232 Available_Reservd_Space -O--CK 100 100 000 - 96 233 Media_Wearout_Indicator -O--CK 100 100 000 - 1665 241 Total_LBAs_Written -O--CK 100 100 000 - 16017 242 Total_LBAs_Read -O--CK 100 100 000 - 11959 249 Unknown_Attribute -O--CK 100 100 000 - 11501 250 Read_Error_Retry_Rate -O--CK 100 100 000 - 18207 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 1 Comprehensive SMART error log 0x03 GPL R/O 2 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 5 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x30 GPL,SL R/O 8 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (2 sectors) Device Error Count: 110 (device log contains only the most recent 8 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 110 [7] occurred at disk power-on lifetime: 10522 hours (438 days + 10 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 00 00 00 00 00 00 Error: UNC at LBA = 0x00000000 = 0 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 08 00 00 17 cc 01 c0 40 00 00:01:37.376 READ DMA EXT 25 00 00 00 08 00 00 17 cc 01 f0 40 00 00:01:37.307 READ DMA EXT 25 00 00 00 08 00 00 17 cc 01 f8 40 00 00:01:37.306 READ DMA EXT 25 00 00 00 40 00 00 14 27 38 00 40 00 00:01:37.267 READ DMA EXT 25 00 00 00 08 00 00 14 88 14 08 40 00 00:01:37.265 READ DMA EXT Error 109 [6] occurred at disk power-on lifetime: 10522 hours (438 days + 10 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 00 00 00 00 00 00 Error: UNC at LBA = 0x00000000 = 0 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 f8 00 00 0b 80 57 00 40 00 00:00:33.636 READ DMA EXT 25 00 00 00 08 00 00 0b 80 57 f8 40 00 00:00:33.566 READ DMA EXT 25 00 00 00 40 00 00 05 f0 2b b0 40 00 00:00:33.565 READ DMA EXT 25 00 00 00 08 00 00 0b 81 4b c8 40 00 00:00:33.562 READ DMA EXT 25 00 00 00 40 00 00 01 74 a8 78 40 00 00:00:33.562 READ DMA EXT Error 108 [5] occurred at disk power-on lifetime: 9008 hours (375 days + 8 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 41 00 b8 00 00 1a 0b e1 e8 40 08 Error: UNC at LBA = 0x1a0be1e8 = 436986344 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 01 00 00 b8 00 00 1a 0b e1 e8 40 08 00:11:01.090 READ FPDMA QUEUED 60 01 00 00 e8 00 00 1a 0b e0 e8 40 08 00:11:00.480 READ FPDMA QUEUED 60 01 00 00 d8 00 00 1a 0b df e8 40 08 00:11:00.467 READ FPDMA QUEUED 60 01 00 00 d0 00 00 1a 0b de e8 40 08 00:11:00.457 READ FPDMA QUEUED 60 01 00 00 c0 00 00 1a 0b dd e8 40 08 00:11:00.435 READ FPDMA QUEUED Error 107 [4] occurred at disk power-on lifetime: 9007 hours (375 days + 7 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 41 00 18 00 00 14 de 0c e8 40 08 Error: UNC at LBA = 0x14de0ce8 = 350096616 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 01 00 00 18 00 00 14 de 0c e8 40 08 00:06:05.950 READ FPDMA QUEUED 60 01 00 00 20 00 00 14 de 0d e8 40 08 00:06:05.160 READ FPDMA QUEUED 60 01 00 00 10 00 00 14 de 0b e8 40 08 00:06:05.151 READ FPDMA QUEUED 60 01 00 00 08 00 00 14 de 0a e8 40 08 00:06:05.151 READ FPDMA QUEUED 60 01 00 00 d8 00 00 14 de 09 e8 40 08 00:06:05.141 READ FPDMA QUEUED Error 106 [3] occurred at disk power-on lifetime: 9007 hours (375 days + 7 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 41 00 00 00 00 0e 92 f3 e8 40 08 Error: UNC at LBA = 0x0e92f3e8 = 244511720 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 01 00 00 00 00 00 0e 92 f3 e8 40 08 00:02:49.107 READ FPDMA QUEUED 60 01 00 00 08 00 00 0e 92 f4 e8 40 08 00:02:49.035 READ FPDMA QUEUED 60 01 00 00 f0 00 00 0e 92 f2 e8 40 08 00:02:49.034 READ FPDMA QUEUED 60 01 00 00 e8 00 00 0e 92 f1 e8 40 08 00:02:49.034 READ FPDMA QUEUED 60 01 00 00 e0 00 00 0e 92 f0 e8 40 08 00:02:49.033 READ FPDMA QUEUED Error 105 [2] occurred at disk power-on lifetime: 8992 hours (374 days + 16 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 00 00 00 00 00 00 Error: UNC at LBA = 0x00000000 = 0 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 08 00 00 17 17 d3 90 40 00 00:02:34.735 READ DMA EXT 25 00 00 01 00 00 00 16 f9 75 08 40 00 00:02:34.665 READ DMA EXT 25 00 00 00 08 00 00 16 00 68 f8 40 00 00:02:34.661 READ DMA EXT 25 00 00 00 08 00 00 14 98 5b 58 40 00 00:02:34.661 READ DMA EXT 25 00 00 00 08 00 00 14 40 1b 60 40 00 00:02:34.660 READ DMA EXT Error 104 [1] occurred at disk power-on lifetime: 8951 hours (372 days + 23 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 00 00 00 00 00 00 Error: UNC at LBA = 0x00000000 = 0 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 01 30 00 00 1a 7a 4a 00 40 00 00:00:57.774 READ DMA EXT 25 00 00 00 08 00 00 1a 7a 49 e8 40 00 00:00:57.662 READ DMA EXT 25 00 00 00 08 00 00 1a 7a 49 c0 40 00 00:00:57.662 READ DMA EXT 25 00 00 00 18 00 00 1a 7a 49 00 40 00 00:00:57.661 READ DMA EXT 25 00 00 00 80 00 00 1a 7a 48 68 40 00 00:00:57.661 READ DMA EXT Error 103 [0] occurred at disk power-on lifetime: 8951 hours (372 days + 23 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 00 00 00 00 00 00 Error: UNC at LBA = 0x00000000 = 0 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 01 00 00 00 19 79 7f 80 40 00 00:00:37.551 READ DMA EXT 25 00 00 01 00 00 00 19 79 7e 80 40 00 00:00:37.398 READ DMA EXT 25 00 00 01 00 00 00 19 79 7d 80 40 00 00:00:37.389 READ DMA EXT 25 00 00 00 80 00 00 19 79 7d 00 40 00 00:00:37.381 READ DMA EXT 25 00 00 01 00 00 00 19 79 79 80 40 00 00:00:37.337 READ DMA EXT SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 7254 - # 2 Extended offline Completed without error 00% 7253 - # 3 Short offline Completed without error 00% 7253 - # 4 Extended offline Completed without error 00% 4033 - # 5 Short offline Completed without error 00% 4027 - # 6 Short offline Completed without error 00% 3960 - # 7 Extended offline Completed without error 00% 3956 - # 8 Short offline Completed without error 00% 1726 - # 9 Short offline Completed without error 00% 1274 - SMART Selective self-test log data structure revision number 0 Note: revision number not 1 implies that no selective self-test has ever been run SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 0 (0x0000) Device State: Active (0) Current Temperature: 0 Celsius Power Cycle Min/Max Temperature: 28/28 Celsius Lifetime Min/Max Temperature: 0/36 Celsius Specified Max Operating Temperature: 100 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 0 minutes Temperature Logging Interval: 0 minutes Min/Max recommended Temperature: 0/100 Celsius Min/Max Temperature Limit: -10/125 Celsius Temperature History Size (Index): 128 (1) Index Estimated Time Temperature Celsius 2 2024-01-16 12:14 ? - ... ..(124 skipped). .. - 127 2024-01-16 14:19 ? - 0 2024-01-16 14:20 36 ***************** 1 2024-01-16 14:21 37 ****************** SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 9770 --- Lifetime Power-On Resets 0x01 0x010 4 10590 --- Power-on Hours 0x01 0x018 6 33590384196 --- Logical Sectors Written 0x01 0x020 6 324422922 --- Number of Write Commands 0x01 0x028 6 25080637418 --- Logical Sectors Read 0x01 0x030 6 301280935 --- Number of Read Commands 0x01 0x038 6 38122597952 --- Date and Time TimeStamp 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 111 --- Number of Reported Uncorrectable Errors 0x04 0x010 4 85 --- Resets Between Cmd Acceptance and Completion 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x008 4 28524 --- Number of Hardware Resets 0x06 0x018 4 0 --- Number of Interface CRC Errors 0x07 ===== = = === == Solid State Device Statistics (rev 1) == 0x07 0x008 1 238 --- Percentage Used Endurance Indicator |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 4 0 Command failed due to ICRC error 0x000a 4 42 Device-to-host register FISes sent due to a COMRESET