/dev/sda smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.2.6-desktop-1omv2390] (OpenMandriva Lx 7.3-3) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Scorpio Blue Serial ATA (AF) Device Model: WDC WD7500BPVT-24HXZT1 Serial Number: -- LU WWN Device Id: 5 0014ee ... Firmware Version: 02.01A02 User Capacity: 750,156,374,016 bytes [750 GB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5400 rpm Device is: In smartctl database ATA Version is: ATA8-ACS (minor revision not indicated) SATA Version is: SATA 2.6, 3.0 Gb/s (current: 3.0 Gb/s) Local Time is: Wed May 3 13:28:36 2023 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Disabled APM level is: 128 (minimum power consumption without standby) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x80) Offline data collection activity was never started. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (15660) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 154) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x7035) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 3 Spin_Up_Time POS--K 200 183 021 - 958 4 Start_Stop_Count -O--CK 087 087 000 - 13165 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-K 198 197 000 - 48 9 Power_On_Hours -O--CK 074 074 000 - 19078 10 Spin_Retry_Count -O--CK 100 100 000 - 0 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 12 Power_Cycle_Count -O--CK 087 087 000 - 13114 192 Power-Off_Retract_Count -O--CK 200 200 000 - 257 193 Load_Cycle_Count -O--CK 094 094 000 - 318964 194 Temperature_Celsius -O---K 113 101 000 - 34 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 0 198 Offline_Uncorrectable ----CK 100 253 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 200 Multi_Zone_Error_Rate ---R-- 100 253 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb7 GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 93 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) Device Error Count: 9 CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 9 [8] occurred at disk power-on lifetime: 8487 hours (353 days + 15 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 05 15 fe 90 40 00 Error: UNC at LBA = 0x0515fe90 = 85327504 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 08 00 68 00 00 00 09 05 80 40 00 00:02:18.184 READ FPDMA QUEUED 60 00 14 00 60 00 00 00 06 a5 98 40 00 00:02:18.173 READ FPDMA QUEUED 60 00 80 00 58 00 00 05 15 fe 60 40 00 00:02:18.155 READ FPDMA QUEUED 60 00 08 00 50 00 00 00 06 a5 90 40 00 00:02:18.155 READ FPDMA QUEUED 61 00 08 00 48 00 00 00 06 b9 f0 40 00 00:02:18.155 WRITE FPDMA QUEUED Error 8 [7] occurred at disk power-on lifetime: 8487 hours (353 days + 15 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 05 15 fe 90 40 00 Error: UNC at LBA = 0x0515fe90 = 85327504 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 40 00 f8 00 00 00 1b f1 32 40 00 00:02:15.441 READ FPDMA QUEUED 60 00 40 00 f0 00 00 00 1f 74 f2 40 00 00:02:15.441 READ FPDMA QUEUED 60 00 08 00 e8 00 00 00 21 8b 13 40 00 00:02:15.420 READ FPDMA QUEUED 60 00 08 00 e0 00 00 00 0b 82 d2 40 00 00:02:15.420 READ FPDMA QUEUED 60 00 20 00 d8 00 00 00 36 eb 21 40 00 00:02:15.392 READ FPDMA QUEUED Error 7 [6] occurred at disk power-on lifetime: 8487 hours (353 days + 15 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 05 15 fe 90 40 00 Error: UNC at LBA = 0x0515fe90 = 85327504 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 10 00 40 00 00 00 36 bd 42 40 00 00:02:12.834 READ FPDMA QUEUED 60 00 40 00 38 00 00 00 21 86 c2 40 00 00:02:12.833 READ FPDMA QUEUED 60 00 40 00 30 00 00 00 0e 79 b2 40 00 00:02:12.833 READ FPDMA QUEUED 60 00 0a 00 28 00 00 00 1d f6 b0 40 00 00:02:12.827 READ FPDMA QUEUED 60 00 20 00 20 00 00 00 1d f6 68 40 00 00:02:12.827 READ FPDMA QUEUED Error 6 [5] occurred at disk power-on lifetime: 8487 hours (353 days + 15 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 05 15 fe 90 40 00 Error: UNC at LBA = 0x0515fe90 = 85327504 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 20 00 98 00 00 00 21 8b e3 40 00 00:02:09.992 READ FPDMA QUEUED 60 00 28 00 90 00 00 00 0c d6 22 40 00 00:02:09.982 READ FPDMA QUEUED 61 00 10 00 88 00 00 00 43 5b 18 40 00 00:02:09.978 WRITE FPDMA QUEUED 61 00 20 00 80 00 00 2b ca 19 e0 40 00 00:02:09.977 WRITE FPDMA QUEUED 61 00 20 00 78 00 00 2a a3 ef c0 40 00 00:02:09.976 WRITE FPDMA QUEUED Error 5 [4] occurred at disk power-on lifetime: 8487 hours (353 days + 15 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 05 15 fe 90 40 00 Error: WP at LBA = 0x0515fe90 = 85327504 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 61 00 08 00 b0 00 00 00 65 f6 d0 40 00 00:02:07.241 WRITE FPDMA QUEUED 61 00 08 00 a8 00 00 00 65 ae 18 40 00 00:02:07.240 WRITE FPDMA QUEUED 61 00 08 00 a0 00 00 00 65 aa d8 40 00 00:02:07.240 WRITE FPDMA QUEUED 61 00 08 00 98 00 00 00 65 aa a0 40 00 00:02:07.239 WRITE FPDMA QUEUED 61 00 08 00 90 00 00 00 65 a8 68 40 00 00:02:07.239 WRITE FPDMA QUEUED Error 4 [3] occurred at disk power-on lifetime: 8487 hours (353 days + 15 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 05 15 fe 90 40 00 Error: UNC at LBA = 0x0515fe90 = 85327504 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 20 00 c8 00 00 00 0d ad eb 40 00 00:02:04.516 READ FPDMA QUEUED 61 00 08 00 c0 00 00 55 7c 81 60 40 00 00:02:04.436 WRITE FPDMA QUEUED 60 00 80 00 b8 00 00 05 15 fe 60 40 00 00:02:04.435 READ FPDMA QUEUED 60 00 20 00 b0 00 00 03 b9 62 82 40 00 00:02:04.435 READ FPDMA QUEUED 60 00 18 00 a8 00 00 05 15 fe e0 40 00 00:02:04.435 READ FPDMA QUEUED Error 3 [2] occurred at disk power-on lifetime: 8487 hours (353 days + 15 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 05 15 fe 90 40 00 Error: WP at LBA = 0x0515fe90 = 85327504 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 61 00 08 00 48 00 00 00 61 a4 48 40 00 00:02:01.708 WRITE FPDMA QUEUED 61 00 08 00 40 00 00 00 61 a4 50 40 00 00:02:01.705 WRITE FPDMA QUEUED 60 00 80 00 38 00 00 05 15 fe 60 40 00 00:02:01.705 READ FPDMA QUEUED 60 00 40 00 30 00 00 2a 1b 44 ea 40 00 00:02:01.705 READ FPDMA QUEUED 60 00 18 00 28 00 00 05 15 fe e0 40 00 00:02:01.705 READ FPDMA QUEUED Error 2 [1] occurred at disk power-on lifetime: 8487 hours (353 days + 15 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 05 15 fe 90 40 00 Error: UNC at LBA = 0x0515fe90 = 85327504 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 70 00 e0 00 00 03 b0 b7 a8 40 00 00:01:58.988 READ FPDMA QUEUED 61 00 08 00 d8 00 00 00 66 d1 a0 40 00 00:01:58.986 WRITE FPDMA QUEUED 61 00 08 00 d0 00 00 00 66 d1 90 40 00 00:01:58.986 WRITE FPDMA QUEUED 61 00 08 00 c8 00 00 00 66 d1 68 40 00 00:01:58.985 WRITE FPDMA QUEUED 61 00 08 00 c0 00 00 00 66 d1 10 40 00 00:01:58.985 WRITE FPDMA QUEUED SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 258 (0x0102) Device State: Active (0) Current Temperature: 34 Celsius Power Cycle Min/Max Temperature: 33/35 Celsius Lifetime Min/Max Temperature: 33/46 Celsius Under/Over Temperature Limit Count: 0/0 Vendor specific: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 128 (96) Index Estimated Time Temperature Celsius 97 2023-05-03 11:21 34 *************** 98 2023-05-03 11:22 34 *************** 99 2023-05-03 11:23 34 *************** 100 2023-05-03 11:24 33 ************** 101 2023-05-03 11:25 34 *************** ... ..( 17 skipped). .. *************** 119 2023-05-03 11:43 34 *************** 120 2023-05-03 11:44 33 ************** ... ..( 2 skipped). .. ************** 123 2023-05-03 11:47 33 ************** 124 2023-05-03 11:48 34 *************** 125 2023-05-03 11:49 34 *************** 126 2023-05-03 11:50 34 *************** 127 2023-05-03 11:51 33 ************** 0 2023-05-03 11:52 34 *************** 1 2023-05-03 11:53 33 ************** 2 2023-05-03 11:54 34 *************** 3 2023-05-03 11:55 34 *************** 4 2023-05-03 11:56 35 **************** ... ..( 2 skipped). .. **************** 7 2023-05-03 11:59 35 **************** 8 2023-05-03 12:00 36 ***************** ... ..( 3 skipped). .. ***************** 12 2023-05-03 12:04 36 ***************** 13 2023-05-03 12:05 37 ****************** ... ..( 2 skipped). .. ****************** 16 2023-05-03 12:08 37 ****************** 17 2023-05-03 12:09 38 ******************* ... ..( 9 skipped). .. ******************* 27 2023-05-03 12:19 38 ******************* 28 2023-05-03 12:20 37 ****************** ... ..( 2 skipped). .. ****************** 31 2023-05-03 12:23 37 ****************** 32 2023-05-03 12:24 36 ***************** ... ..( 3 skipped). .. ***************** 36 2023-05-03 12:28 36 ***************** 37 2023-05-03 12:29 35 **************** ... ..( 2 skipped). .. **************** 40 2023-05-03 12:32 35 **************** 41 2023-05-03 12:33 34 *************** ... ..( 4 skipped). .. *************** 46 2023-05-03 12:38 34 *************** 47 2023-05-03 12:39 33 ************** 48 2023-05-03 12:40 34 *************** ... ..( 2 skipped). .. *************** 51 2023-05-03 12:43 34 *************** 52 2023-05-03 12:44 33 ************** 53 2023-05-03 12:45 33 ************** 54 2023-05-03 12:46 34 *************** 55 2023-05-03 12:47 34 *************** 56 2023-05-03 12:48 33 ************** ... ..( 3 skipped). .. ************** 60 2023-05-03 12:52 33 ************** 61 2023-05-03 12:53 34 *************** 62 2023-05-03 12:54 33 ************** ... ..( 3 skipped). .. ************** 66 2023-05-03 12:58 33 ************** 67 2023-05-03 12:59 34 *************** ... ..( 3 skipped). .. *************** 71 2023-05-03 13:03 34 *************** 72 2023-05-03 13:04 33 ************** 73 2023-05-03 13:05 34 *************** 74 2023-05-03 13:06 33 ************** 75 2023-05-03 13:07 33 ************** 76 2023-05-03 13:08 34 *************** 77 2023-05-03 13:09 33 ************** 78 2023-05-03 13:10 34 *************** ... ..( 2 skipped). .. *************** 81 2023-05-03 13:13 34 *************** 82 2023-05-03 13:14 33 ************** 83 2023-05-03 13:15 34 *************** ... ..( 3 skipped). .. *************** 87 2023-05-03 13:19 34 *************** 88 2023-05-03 13:20 ? - 89 2023-05-03 13:21 35 **************** 90 2023-05-03 13:22 33 ************** 91 2023-05-03 13:23 34 *************** ... ..( 4 skipped). .. *************** 96 2023-05-03 13:28 34 *************** SCT Error Recovery Control command not supported Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 2 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 2 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x8000 4 462 Vendor specific