/dev/sda === START OF INFORMATION SECTION === Model Family: Seagate Maxtor DiamondMax 22 Device Model: MAXTOR STM3320613AS Serial Number: -- LU WWN Device Id: 5 000c50 ... Firmware Version: MX13 User Capacity: 320 072 933 376 bytes [320 GB] Sector Size: 512 bytes logical/physical Rotation Rate: 7200 rpm Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 2.6, 3.0 Gb/s Local Time is: Sat Jan 30 21:27:48 2016 EET ==> WARNING: There are known problems with these drives, see the following Seagate web pages: http://knowledge.seagate.com/articles/en_US/FAQ/207931en http://knowledge.seagate.com/articles/en_US/FAQ/207969en http://knowledge.seagate.com/articles/en_US/FAQ/207975en SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Unknown === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED See vendor-specific Attribute list for marginal Attributes. General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 617) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 69) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x103b) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 118 099 006 - 194894047 3 Spin_Up_Time PO---- 097 097 000 - 0 4 Start_Stop_Count -O--CK 091 091 020 - 9948 5 Reallocated_Sector_Ct PO--CK 100 100 036 - 4 7 Seek_Error_Rate POSR-- 087 060 030 - 525577542 9 Power_On_Hours -O--CK 076 076 000 - 21560 10 Spin_Retry_Count PO--C- 100 100 097 - 43 12 Power_Cycle_Count -O--CK 096 037 020 - 4189 184 End-to-End_Error -O--CK 100 100 099 - 0 187 Reported_Uncorrect -O--CK 100 100 000 - 0 188 Command_Timeout -O--CK 100 092 000 - 5225 189 High_Fly_Writes -O-RCK 001 001 000 - 1485 190 Airflow_Temperature_Cel -O---K 061 041 045 Past 39 (Min/Max 24/44 #511) 194 Temperature_Celsius -O---K 039 059 000 - 39 (0 17 0 0 0) 195 Hardware_ECC_Recovered -O-RC- 039 024 000 - 194894047 197 Current_Pending_Sector -O--C- 100 100 000 - 0 198 Offline_Uncorrectable ----C- 100 100 000 - 0 199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 GPL,SL R/O 1 Summary SMART error log 0x02 GPL,SL R/O 5 Comprehensive SMART error log 0x03 GPL,SL R/O 5 Ext. Comprehensive SMART error log 0x06 GPL,SL R/O 1 SMART self-test log 0x07 GPL,SL R/O 1 Extended self-test log 0x09 GPL,SL R/W 1 Selective self-test log 0x10 GPL,SL R/O 1 NCQ Command Error log 0x11 GPL,SL R/O 1 SATA Phy Event Counters 0x21 GPL,SL R/O 1 Write stream error log 0x22 GPL,SL R/O 1 Read stream error log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa1 GPL,SL VS 20 Device vendor specific log 0xa2 GPL VS 2248 Device vendor specific log 0xa8 GPL,SL VS 20 Device vendor specific log 0xa9 GPL,SL VS 1 Device vendor specific log 0xb0 GPL VS 2819 Device vendor specific log 0xbe-0xbf GPL VS 65535 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (5 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 522 (0x020a) SCT Support Level: 1 Device State: Active (0) Current Temperature: 39 Celsius Power Cycle Min/Max Temperature: 24/44 Celsius Lifetime Min/Max Temperature: 17/59 Celsius Under/Over Temperature Limit Count: 0/150 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/ 0 Celsius Min/Max Temperature Limit: 0/ 0 Celsius Temperature History Size (Index): 128 (100) Index Estimated Time Temperature Celsius 101 2016-01-30 19:20 36 ***************** ... ..( 4 skipped). .. ***************** 106 2016-01-30 19:25 36 ***************** 107 2016-01-30 19:26 37 ****************** ... ..( 6 skipped). .. ****************** 114 2016-01-30 19:33 37 ****************** 115 2016-01-30 19:34 38 ******************* 116 2016-01-30 19:35 38 ******************* 117 2016-01-30 19:36 38 ******************* 118 2016-01-30 19:37 39 ******************** 119 2016-01-30 19:38 39 ******************** 120 2016-01-30 19:39 39 ******************** 121 2016-01-30 19:40 40 ********************* 122 2016-01-30 19:41 41 ********************** ... ..( 2 skipped). .. ********************** 125 2016-01-30 19:44 41 ********************** 126 2016-01-30 19:45 42 *********************** ... ..( 3 skipped). .. *********************** 2 2016-01-30 19:49 42 *********************** 3 2016-01-30 19:50 43 ************************ ... ..( 3 skipped). .. ************************ 7 2016-01-30 19:54 43 ************************ 8 2016-01-30 19:55 44 ************************* 9 2016-01-30 19:56 40 ********************* 10 2016-01-30 19:57 41 ********************** 11 2016-01-30 19:58 42 *********************** 12 2016-01-30 19:59 42 *********************** 13 2016-01-30 20:00 43 ************************ 14 2016-01-30 20:01 43 ************************ 15 2016-01-30 20:02 43 ************************ 16 2016-01-30 20:03 44 ************************* ... ..( 8 skipped). .. ************************* 25 2016-01-30 20:12 44 ************************* 26 2016-01-30 20:13 43 ************************ ... ..( 6 skipped). .. ************************ 33 2016-01-30 20:20 43 ************************ 34 2016-01-30 20:21 34 *************** 35 2016-01-30 20:22 34 *************** 36 2016-01-30 20:23 34 *************** 37 2016-01-30 20:24 35 **************** 38 2016-01-30 20:25 36 ***************** ... ..( 4 skipped). .. ***************** 43 2016-01-30 20:30 36 ***************** 44 2016-01-30 20:31 37 ****************** ... ..( 9 skipped). .. ****************** 54 2016-01-30 20:41 37 ****************** 55 2016-01-30 20:42 38 ******************* 56 2016-01-30 20:43 38 ******************* 57 2016-01-30 20:44 39 ******************** 58 2016-01-30 20:45 39 ******************** 59 2016-01-30 20:46 39 ******************** 60 2016-01-30 20:47 40 ********************* 61 2016-01-30 20:48 40 ********************* 62 2016-01-30 20:49 41 ********************** ... ..( 2 skipped). .. ********************** 65 2016-01-30 20:52 41 ********************** 66 2016-01-30 20:53 40 ********************* ... ..( 3 skipped). .. ********************* 70 2016-01-30 20:57 40 ********************* 71 2016-01-30 20:58 39 ******************** ... ..( 28 skipped). .. ******************** 100 2016-01-30 21:27 39 ******************** SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP Log 0x04) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x000a 2 6 Device-to-host register FISes sent due to a COMRESET 0x0001 2 0 Command failed due to ICRC error 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS /dev/sdb === START OF INFORMATION SECTION === Model Family: Seagate Barracuda 7200.14 (AF) Device Model: ST2000DM001-1CH164 Serial Number: -- LU WWN Device Id: 5 000c50 ... Firmware Version: CC43 User Capacity: 2 000 398 934 016 bytes [2,00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 7200 rpm Form Factor: 3.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Sat Jan 30 21:27:49 2016 EET SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 128 (minimum power consumption without standby) Rd look-ahead is: Enabled Write cache is: Enabled ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Unavailable === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED See vendor-specific Attribute list for marginal Attributes. General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 609) seconds. Offline data collection capabilities: (0x73) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 243) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x3085) SCT Status supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 113 099 006 - 56783168 3 Spin_Up_Time PO---- 092 091 000 - 0 4 Start_Stop_Count -O--CK 099 099 020 - 1720 5 Reallocated_Sector_Ct PO--CK 100 100 036 - 0 7 Seek_Error_Rate POSR-- 062 053 030 - 773376338095 9 Power_On_Hours -O--CK 088 088 000 - 10707 10 Spin_Retry_Count PO--C- 100 100 097 - 0 12 Power_Cycle_Count -O--CK 099 099 020 - 1662 183 Runtime_Bad_Block -O--CK 100 100 000 - 0 184 End-to-End_Error -O--CK 100 100 099 - 0 187 Reported_Uncorrect -O--CK 098 098 000 - 2 188 Command_Timeout -O--CK 100 098 000 - 16 16 58 189 High_Fly_Writes -O-RCK 100 100 000 - 0 190 Airflow_Temperature_Cel -O---K 060 038 045 Past 40 (Min/Max 23/48 #4029) 191 G-Sense_Error_Rate -O--CK 100 100 000 - 0 192 Power-Off_Retract_Count -O--CK 100 100 000 - 127 193 Load_Cycle_Count -O--CK 089 089 000 - 22814 194 Temperature_Celsius -O---K 040 062 000 - 40 (128 0 0 0 0) 197 Current_Pending_Sector -O--C- 100 100 000 - 0 198 Offline_Uncorrectable ----C- 100 100 000 - 0 199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 240 Head_Flying_Hours ------ 100 253 000 - 10587h+41m+50.275s 241 Total_LBAs_Written ------ 100 253 000 - 42001857775 242 Total_LBAs_Read ------ 100 253 000 - 68119115396 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 5 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters 0x21 GPL R/O 1 Write stream error log 0x22 GPL R/O 1 Read stream error log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa1 GPL,SL VS 20 Device vendor specific log 0xa2 GPL VS 4496 Device vendor specific log 0xa8 GPL,SL VS 129 Device vendor specific log 0xa9 GPL,SL VS 1 Device vendor specific log 0xab GPL VS 1 Device vendor specific log 0xb0 GPL VS 5176 Device vendor specific log 0xbd GPL VS 512 Device vendor specific log 0xbe-0xbf GPL VS 65535 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL,SL VS 10 Device vendor specific log 0xc4 GPL,SL VS 5 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (5 sectors) Device Error Count: 2 CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 2 [1] occurred at disk power-on lifetime: 5536 hours (230 days + 16 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 00 5f fd 28 00 00 Error: UNC at LBA = 0x005ffd28 = 6290728 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 08 00 00 00 5f fd 28 e0 00 00:00:55.326 READ DMA EXT 25 00 00 00 08 00 00 00 5f f9 20 e0 00 00:00:52.175 READ DMA EXT 25 00 00 00 08 00 00 00 5f f9 18 e0 00 00:00:52.156 READ DMA EXT ec 00 00 00 00 00 00 00 00 00 00 a0 00 00:00:52.139 IDENTIFY DEVICE 25 00 00 00 01 00 00 00 03 28 00 e0 00 00:00:52.139 READ DMA EXT Error 1 [0] occurred at disk power-on lifetime: 5536 hours (230 days + 16 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 00 5f fd 28 00 00 Error: UNC at LBA = 0x005ffd28 = 6290728 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 08 00 00 00 5f f9 20 e0 00 00:00:52.175 READ DMA EXT 25 00 00 00 08 00 00 00 5f f9 18 e0 00 00:00:52.156 READ DMA EXT ec 00 00 00 00 00 00 00 00 00 00 a0 00 00:00:52.139 IDENTIFY DEVICE 25 00 00 00 01 00 00 00 03 28 00 e0 00 00:00:52.139 READ DMA EXT 35 00 00 00 10 00 00 00 03 28 00 e0 00 00:00:52.139 WRITE DMA EXT SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 522 (0x020a) SCT Support Level: 1 Device State: Active (0) Current Temperature: 40 Celsius Power Cycle Min/Max Temperature: 23/47 Celsius Lifetime Min/Max Temperature: 16/62 Celsius Under/Over Temperature Limit Count: 0/0 SCT Data Table command not supported SCT Error Recovery Control command not supported Device Statistics (GP Log 0x04) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x000a 2 6 Device-to-host register FISes sent due to a COMRESET 0x0001 2 0 Command failed due to ICRC error 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS