/dev/sda === START OF INFORMATION SECTION === Model Family: Seagate Barracuda 7200.8 Device Model: ST3250823A Serial Number: -- Firmware Version: 3.06 User Capacity: 250,059,350,016 bytes [250 GB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: ATA/ATAPI-7 (minor revision not indicated) Local Time is: Mon Jul 30 08:25:14 2018 WIB SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Unavailable === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED See vendor-specific Attribute list for marginal Attributes. General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 430) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 84) minutes. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 050 034 006 - 31354788 3 Spin_Up_Time PO---- 099 098 000 - 0 4 Start_Stop_Count -O--CK 095 095 020 - 6031 5 Reallocated_Sector_Ct PO--CK 100 100 036 - 0 7 Seek_Error_Rate POSR-- 086 060 030 - 453368706 9 Power_On_Hours -O--CK 072 072 000 - 24611 10 Spin_Retry_Count PO--C- 100 097 097 Past 0 12 Power_Cycle_Count -O--CK 095 095 020 - 6008 194 Temperature_Celsius -O---K 054 064 000 - 54 (0 11 0 0 0) 195 Hardware_ECC_Recovered -O-RC- 053 043 000 - 64501122 197 Current_Pending_Sector -O--C- 100 100 000 - 0 198 Offline_Uncorrectable ----C- 100 100 000 - 0 199 UDMA_CRC_Error_Count -OSRCK 200 182 000 - 73 200 Multi_Zone_Error_Rate ------ 100 253 000 - 0 202 Data_Address_Mark_Errs -O--CK 100 253 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 GPL,SL R/O 1 Summary SMART error log 0x02 GPL,SL R/O 5 Comprehensive SMART error log 0x03 GPL,SL R/O 5 Ext. Comprehensive SMART error log 0x06 GPL,SL R/O 1 SMART self-test log 0x07 GPL,SL R/O 1 Extended self-test log 0x09 GPL,SL R/W 1 Selective self-test log 0x20 GPL,SL R/O 1 Streaming performance log [OBS-8] 0x21 GPL,SL R/O 1 Write stream error log 0x22 GPL,SL R/O 1 Read stream error log 0x23 GPL,SL R/O 1 Delayed sector log [OBS-8] 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0 GPL,SL VS 1 Device vendor specific log 0xa1 GPL,SL VS 20 Device vendor specific log 0xa2 GPL,SL VS 101 Device vendor specific log 0xa8 GPL,SL VS 20 Device vendor specific log 0xa9 GPL,SL VS 1 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer 0xff GPL - 23552 Reserved SMART Extended Comprehensive Error Log Version: 1 (5 sectors) Device Error Count: 90 (device log contains only the most recent 20 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 90 [9] occurred at disk power-on lifetime: 21177 hours (882 days + 9 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 01 00 00 00 00 00 00 f0 00 Error: ICRC, ABRT 1 sectors at LBA = 0x00000000 = 0 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- c8 00 20 00 01 00 00 00 00 00 00 f0 00 00:00:16.842 READ DMA c6 00 20 00 10 00 0f 00 00 00 01 ff 00 00:00:16.842 SET MULTIPLE MODE 91 00 20 00 3f 00 0f 00 00 00 01 ff 00 00:00:16.842 INITIALIZE DEVICE PARAMETERS [OBS-6] 10 00 20 00 01 00 01 00 00 00 01 f1 00 00:00:16.835 RECALIBRATE [OBS-4] 10 00 20 00 01 00 00 00 00 00 00 f1 00 00:00:16.359 RECALIBRATE [OBS-4] Error 89 [8] occurred at disk power-on lifetime: 21177 hours (882 days + 9 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 01 00 00 00 00 00 00 f0 00 Error: ICRC, ABRT 1 sectors at LBA = 0x00000000 = 0 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- c8 00 20 00 01 00 00 00 00 00 00 f0 00 00:00:11.063 READ DMA c6 00 20 00 10 00 0f 00 00 00 01 ff 00 00:00:11.063 SET MULTIPLE MODE 91 00 20 00 3f 00 0f 00 00 00 01 ff 00 00:00:11.056 INITIALIZE DEVICE PARAMETERS [OBS-6] 10 00 20 00 01 00 01 00 00 00 01 f1 00 00:00:10.582 RECALIBRATE [OBS-4] 10 00 20 00 10 00 0f 00 00 00 01 f1 00 00:00:16.359 RECALIBRATE [OBS-4] Error 88 [7] occurred at disk power-on lifetime: 21177 hours (882 days + 9 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 01 00 00 00 00 00 00 f0 00 Error: ICRC, ABRT 1 sectors at LBA = 0x00000000 = 0 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- c8 00 20 00 01 00 00 00 00 00 00 f0 00 00:00:16.842 READ DMA c6 00 20 00 10 00 0f 00 00 00 01 ff 00 00:00:16.842 SET MULTIPLE MODE 91 00 20 00 3f 00 0f 00 00 00 01 ff 00 00:00:16.842 INITIALIZE DEVICE PARAMETERS [OBS-6] 10 00 20 00 01 00 01 00 00 00 01 f1 00 00:00:16.835 RECALIBRATE [OBS-4] 10 00 20 00 01 00 00 00 00 00 00 f1 00 00:00:17.808 RECALIBRATE [OBS-4] Error 87 [6] occurred at disk power-on lifetime: 21177 hours (882 days + 9 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 01 00 00 00 00 00 00 f0 00 Error: ICRC, ABRT 1 sectors at LBA = 0x00000000 = 0 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- c8 00 20 00 01 00 00 00 00 00 00 f0 00 00:00:16.842 READ DMA c6 00 20 00 10 00 0f 00 00 00 01 ff 00 00:00:16.842 SET MULTIPLE MODE 91 00 20 00 3f 00 0f 00 00 00 01 ff 00 00:00:16.842 INITIALIZE DEVICE PARAMETERS [OBS-6] 10 00 20 00 01 00 01 00 00 00 01 f1 00 00:00:16.835 RECALIBRATE [OBS-4] 10 00 20 00 01 00 00 00 00 00 00 f1 00 00:00:16.359 RECALIBRATE [OBS-4] Error 86 [5] occurred at disk power-on lifetime: 21177 hours (882 days + 9 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 01 00 00 00 00 00 00 f0 00 Error: ICRC, ABRT 1 sectors at LBA = 0x00000000 = 0 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- c8 00 20 00 01 00 00 00 00 00 00 f0 00 00:00:16.842 READ DMA c6 00 20 00 10 00 0f 00 00 00 01 ff 00 00:00:16.842 SET MULTIPLE MODE 91 00 20 00 3f 00 0f 00 00 00 01 ff 00 00:00:16.842 INITIALIZE DEVICE PARAMETERS [OBS-6] 10 00 20 00 01 00 01 00 00 00 01 f1 00 00:00:16.835 RECALIBRATE [OBS-4] 10 00 20 00 01 00 00 00 00 00 00 f1 00 00:00:16.359 RECALIBRATE [OBS-4] Error 85 [4] occurred at disk power-on lifetime: 21177 hours (882 days + 9 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 01 00 00 00 00 00 00 f0 00 Error: ICRC, ABRT 1 sectors at LBA = 0x00000000 = 0 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- c8 00 20 00 01 00 00 00 00 00 00 f0 00 00:00:11.063 READ DMA c6 00 20 00 10 00 0f 00 00 00 01 ff 00 00:00:11.063 SET MULTIPLE MODE 91 00 20 00 3f 00 0f 00 00 00 01 ff 00 00:00:11.056 INITIALIZE DEVICE PARAMETERS [OBS-6] 10 00 20 00 01 00 01 00 00 00 01 f1 00 00:00:10.582 RECALIBRATE [OBS-4] 10 00 20 00 10 00 0f 00 00 00 01 f1 00 00:00:16.359 RECALIBRATE [OBS-4] Error 84 [3] occurred at disk power-on lifetime: 21177 hours (882 days + 9 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 01 00 00 00 00 00 00 f0 00 Error: ICRC, ABRT 1 sectors at LBA = 0x00000000 = 0 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- c8 00 20 00 01 00 00 00 00 00 00 f0 00 00:00:16.842 READ DMA c6 00 20 00 10 00 0f 00 00 00 01 ff 00 00:00:16.842 SET MULTIPLE MODE 91 00 20 00 3f 00 0f 00 00 00 01 ff 00 00:00:16.842 INITIALIZE DEVICE PARAMETERS [OBS-6] 10 00 20 00 01 00 01 00 00 00 01 f1 00 00:00:16.835 RECALIBRATE [OBS-4] 10 00 20 00 01 00 00 00 00 00 00 f1 00 00:00:17.808 RECALIBRATE [OBS-4] Error 83 [2] occurred at disk power-on lifetime: 21177 hours (882 days + 9 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 01 00 00 00 00 00 00 f0 00 Error: ICRC, ABRT 1 sectors at LBA = 0x00000000 = 0 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- c8 00 20 00 01 00 00 00 00 00 00 f0 00 00:00:16.842 READ DMA c6 00 20 00 10 00 0f 00 00 00 01 ff 00 00:00:16.842 SET MULTIPLE MODE 91 00 20 00 3f 00 0f 00 00 00 01 ff 00 00:00:16.842 INITIALIZE DEVICE PARAMETERS [OBS-6] 10 00 20 00 01 00 01 00 00 00 01 f1 00 00:00:16.835 RECALIBRATE [OBS-4] 10 00 20 00 01 00 00 00 00 00 00 f1 00 00:00:16.359 RECALIBRATE [OBS-4] SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 24606 - # 2 Short offline Completed without error 00% 24583 - # 3 Short offline Completed without error 00% 24558 - # 4 Short offline Completed without error 00% 24535 - # 5 Short offline Completed without error 00% 24512 - # 6 Short offline Completed without error 00% 24488 - # 7 Short offline Completed without error 00% 24464 - # 8 Short offline Completed without error 00% 24441 - # 9 Short offline Completed without error 00% 24417 - #10 Short offline Completed without error 00% 24394 - #11 Short offline Completed without error 00% 24384 - #12 Short offline Completed without error 00% 24352 - #13 Short offline Completed without error 00% 24329 - #14 Short offline Completed without error 00% 24305 - #15 Short offline Completed without error 00% 24282 - #16 Short offline Completed without error 00% 24258 - #17 Short offline Completed without error 00% 24235 - #18 Short offline Completed without error 00% 24211 - #19 Short offline Completed without error 00% 24188 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Commands not supported Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) not supported /dev/sdb === START OF INFORMATION SECTION === Device Model: SAMSUNG SV0412H Serial Number: -- Firmware Version: SK300-15 User Capacity: 40,060,403,712 bytes [40.0 GB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: ATA/ATAPI-6 T13/1410D revision 1 Local Time is: Mon Jul 30 08:25:14 2018 WIB ==> WARNING: May need -F samsung disabled; see manual for details. SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM level is: 128 (quiet), recommended: 128 APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Unavailable === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x05) Offline data collection activity was aborted by an interrupting command from host. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 1920) seconds. Offline data collection capabilities: (0x1b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. No Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. No General Purpose Logging support. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 32) minutes. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate -O-R-- 100 100 000 - 1207 4 Start_Stop_Count -O--CK 095 095 000 - 5074 5 Reallocated_Sector_Ct PO--CK 100 100 009 - 1 7 Seek_Error_Rate PO-R-- 253 253 051 - 0 8 Seek_Time_Performance --S--K 084 082 000 - 12585 9 Power_On_Half_Minutes -O--CK 085 085 000 - 77752h+25m 12 Power_Cycle_Count -O--CK 097 097 000 - 3925 194 Temperature_Celsius_x10 -O---K 108 074 000 - 48.4 197 Current_Pending_Sector PO--CK 253 253 009 - 0 198 Offline_Uncorrectable P---CK 048 048 009 - 248 199 UDMA_CRC_Error_Count -O-R-- 100 100 000 - 271 200 Multi_Zone_Error_Rate PO-R-- 100 100 051 - 0 201 Soft_Read_Error_Rate PO-R-- 100 100 051 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory not supported SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 2 Comprehensive SMART error log 0x06 SL R/O 2 SMART self-test log 0x80-0x9f SL R/W 16 Host vendor specific log SMART Extended Comprehensive Error Log (GP Log 0x03) not supported SMART Error Log Version: 1 Warning: ATA error count 19678 inconsistent with error log pointer 5 ATA Error Count: 19678 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 19678 occurred at disk power-on lifetime: 65534 hours (2730 days + 14 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 10 51 00 3f 3f ff ff Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- f9 00 00 3f 3f ff ff 00 00:04:46.000 SET MAX ADDRESS [OBS-6] f8 00 00 00 00 00 b0 00 00:04:46.000 READ NATIVE MAX ADDRESS [OBS-ACS-3] ec 00 01 00 00 00 b0 00 00:04:46.000 IDENTIFY DEVICE f5 00 00 01 00 00 f0 00 00:04:46.000 SECURITY FREEZE LOCK e3 20 00 01 00 00 b0 00 00:04:46.000 IDLE Error 19677 occurred at disk power-on lifetime: 65534 hours (2730 days + 14 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 10 51 00 3f 3f ff ff Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- f9 00 00 3f 3f ff ff 00 49d+09:38:05.296 SET MAX ADDRESS [OBS-6] f8 00 00 00 00 00 b0 00 49d+09:38:05.296 READ NATIVE MAX ADDRESS [OBS-ACS-3] ec 00 01 00 00 00 b0 00 49d+09:38:05.296 IDENTIFY DEVICE f5 00 00 01 00 00 f0 00 49d+09:38:05.296 SECURITY FREEZE LOCK e3 20 00 01 00 00 b0 00 49d+09:38:05.296 IDLE Error 19676 occurred at disk power-on lifetime: 65534 hours (2730 days + 14 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 10 51 00 3f 3f ff ff Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- f9 00 00 3f 3f ff ff 00 49d+11:18:44.296 SET MAX ADDRESS [OBS-6] f8 00 00 00 00 00 b0 00 49d+11:18:44.296 READ NATIVE MAX ADDRESS [OBS-ACS-3] ec 00 01 00 00 00 b0 00 49d+11:18:44.296 IDENTIFY DEVICE f5 00 00 01 00 00 f0 00 49d+11:18:44.296 SECURITY FREEZE LOCK e3 20 00 01 00 00 b0 00 49d+11:18:43.296 IDLE Error 19675 occurred at disk power-on lifetime: 65534 hours (2730 days + 14 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 04 51 00 00 00 00 50 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- b1 c2 00 00 00 00 50 00 49d+13:51:28.296 DEVICE CONFIGURATION IDENTIFY [OBS-ACS-3] ec 00 00 00 00 00 10 00 49d+13:51:28.296 IDENTIFY DEVICE b0 d5 01 01 c2 4f 10 00 49d+13:46:38.296 SMART READ LOG b0 d5 01 06 c2 4f 10 00 49d+13:46:38.296 SMART READ LOG b0 d0 01 00 c2 4f 10 00 49d+13:46:38.296 SMART READ DATA Error 19674 occurred at disk power-on lifetime: 65534 hours (2730 days + 14 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 04 51 00 00 00 00 50 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- b1 c2 00 00 00 00 50 00 49d+11:48:18.296 DEVICE CONFIGURATION IDENTIFY [OBS-ACS-3] ec 00 00 00 00 00 10 00 49d+11:48:18.296 IDENTIFY DEVICE b0 d5 01 01 c2 4f 10 00 49d+11:45:55.296 SMART READ LOG b0 d5 01 06 c2 4f 10 00 49d+11:45:55.296 SMART READ LOG b0 d0 01 00 c2 4f 10 00 49d+11:45:55.296 SMART READ DATA SMART Extended Self-test Log (GP Log 0x07) not supported SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 65534 - # 2 Short offline Completed without error 00% 65534 - # 3 Short offline Completed without error 00% 65534 - # 4 Short offline Completed without error 00% 65534 - # 5 Short offline Completed without error 00% 65534 - # 6 Short offline Completed without error 00% 65534 - # 7 Short offline Completed without error 00% 65534 - # 8 Short offline Completed without error 00% 65534 - # 9 Short offline Completed without error 00% 65534 - #10 Short offline Completed without error 00% 65534 - #11 Short offline Completed without error 00% 65534 - #12 Short offline Completed without error 00% 65534 - #13 Short offline Completed without error 00% 65534 - #14 Short offline Completed without error 00% 65534 - #15 Short offline Completed without error 00% 65534 - #16 Short offline Completed without error 00% 65534 - #17 Short offline Completed without error 00% 65534 - #18 Short offline Completed without error 00% 65534 - #19 Short offline Completed without error 00% 65534 - #20 Short offline Completed without error 00% 65534 - #21 Short offline Completed without error 00% 65534 - Selective Self-tests/Logging not supported SCT Commands not supported Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) not supported /dev/sdc === START OF INFORMATION SECTION === Model Family: Seagate Maxtor DiamondMax 21 Device Model: MAXTOR STM380815AS Serial Number: -- Firmware Version: 4.AAB User Capacity: 80,026,361,856 bytes [80.0 GB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: ATA/ATAPI-7 (minor revision not indicated) Local Time is: Mon Jul 30 08:25:14 2018 WIB SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Unavailable === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED See vendor-specific Attribute list for marginal Attributes. General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 41) The self-test routine was interrupted by the host with a hard or soft reset. Total time to complete Offline data collection: ( 430) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 27) minutes. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 100 253 006 - 0 3 Spin_Up_Time PO---- 099 097 000 - 0 4 Start_Stop_Count -O--CK 001 001 020 NOW 188049 5 Reallocated_Sector_Ct PO--CK 100 100 036 - 0 7 Seek_Error_Rate POSR-- 089 060 030 - 929351235 9 Power_On_Hours -O--CK 059 059 000 - 36606 10 Spin_Retry_Count PO--C- 100 100 097 - 0 12 Power_Cycle_Count -O--CK 001 001 020 NOW 188419 187 Reported_Uncorrect -O--CK 076 076 000 - 24 189 High_Fly_Writes -O-RCK 100 100 000 - 0 190 Airflow_Temperature_Cel -O---K 052 044 045 Past 48 (Min/Max 48/48 #10) 194 Temperature_Celsius -O---K 048 056 000 - 48 (0 23 0 0 0) 195 Hardware_ECC_Recovered -O-RC- 097 065 000 - 232573097 197 Current_Pending_Sector -O--C- 100 001 000 - 5 198 Offline_Uncorrectable ----C- 100 001 000 - 5 199 UDMA_CRC_Error_Count -OSRCK 200 143 000 - 1429 200 Multi_Zone_Error_Rate ------ 100 253 000 - 0 202 Data_Address_Mark_Errs -O--CK 100 253 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 GPL,SL R/O 1 Summary SMART error log 0x02 GPL,SL R/O 5 Comprehensive SMART error log 0x03 GPL,SL R/O 5 Ext. Comprehensive SMART error log 0x06 GPL,SL R/O 1 SMART self-test log 0x07 GPL,SL R/O 1 Extended self-test log 0x09 GPL,SL R/W 1 Selective self-test log 0x10 GPL,SL R/O 1 NCQ Command Error log 0x11 GPL,SL R/O 1 SATA Phy Event Counters log 0x20 GPL,SL R/O 1 Streaming performance log [OBS-8] 0x21 GPL,SL R/O 1 Write stream error log 0x22 GPL,SL R/O 1 Read stream error log 0x23 GPL,SL R/O 1 Delayed sector log [OBS-8] 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0 GPL,SL VS 1 Device vendor specific log 0xa1 GPL,SL VS 20 Device vendor specific log 0xa2 GPL,SL VS 101 Device vendor specific log 0xa8 GPL,SL VS 20 Device vendor specific log 0xa9 GPL,SL VS 1 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer 0xff GPL - 23040 Reserved SMART Extended Comprehensive Error Log Version: 1 (5 sectors) Device Error Count: 1278 (device log contains only the most recent 20 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 1278 [17] occurred at disk power-on lifetime: 36580 hours (1524 days + 4 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 0e 00 00 85 e0 00 Error: UNC at LBA = 0x0e000085 = 234881157 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- c8 00 00 00 08 00 00 0e 00 00 80 e0 00 00:00:23.441 READ DMA c8 00 00 00 08 00 00 0e 00 00 78 e0 00 00:00:23.440 READ DMA c8 00 00 00 08 00 00 0e 00 00 70 e0 00 00:00:23.472 READ DMA c8 00 00 00 08 00 00 0e 00 00 68 e0 00 00:00:23.471 READ DMA c8 00 00 00 08 00 00 0e 00 00 60 e0 00 00:00:23.471 READ DMA Error 1277 [16] occurred at disk power-on lifetime: 36580 hours (1524 days + 4 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 0e 00 00 85 e0 00 Error: UNC at LBA = 0x0e000085 = 234881157 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 02 00 00 00 0e 00 00 00 e0 00 00:00:19.787 READ DMA EXT 25 00 00 02 00 00 00 0c 00 00 00 e0 00 00:00:19.780 READ DMA EXT 25 00 00 02 00 00 00 0a 00 00 00 e0 00 00:00:19.769 READ DMA EXT 25 00 00 02 00 00 00 08 00 00 00 e0 00 00:00:19.762 READ DMA EXT c8 00 00 00 08 00 09 08 00 40 20 e9 00 00:00:19.756 READ DMA Error 1276 [15] occurred at disk power-on lifetime: 36580 hours (1524 days + 4 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 52 00 00 f3 e0 00 Error: UNC at LBA = 0x520000f3 = 1375731955 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- c8 00 00 00 08 00 00 52 00 00 f0 e0 00 00:00:30.693 READ DMA c8 00 00 00 08 00 00 52 00 00 e8 e0 00 00:00:30.693 READ DMA c8 00 00 00 08 00 00 52 00 00 e0 e0 00 00:00:30.693 READ DMA c8 00 00 00 08 00 00 52 00 00 d8 e0 00 00:00:30.693 READ DMA c8 00 00 00 08 00 00 52 00 00 d0 e0 00 00:00:30.692 READ DMA Error 1275 [14] occurred at disk power-on lifetime: 36580 hours (1524 days + 4 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 52 00 00 f3 e0 00 Error: UNC at LBA = 0x520000f3 = 1375731955 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 02 00 00 00 52 00 00 00 e0 00 00:00:27.078 READ DMA EXT 25 00 00 02 00 00 00 50 00 00 00 e0 00 00:00:27.073 READ DMA EXT 25 00 00 02 00 00 00 4e 00 00 00 e0 00 00:00:27.070 READ DMA EXT 25 00 00 02 00 00 00 4c 00 00 00 e0 00 00:00:27.067 READ DMA EXT 25 00 00 02 00 00 00 4a 00 00 00 e0 00 00:00:27.063 READ DMA EXT Error 1274 [13] occurred at disk power-on lifetime: 36580 hours (1524 days + 4 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 0e 00 00 85 e0 00 Error: UNC at LBA = 0x0e000085 = 234881157 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- c8 00 00 00 08 00 00 0e 00 00 80 e0 00 00:00:23.441 READ DMA c8 00 00 00 08 00 00 0e 00 00 78 e0 00 00:00:23.440 READ DMA c8 00 00 00 08 00 00 0e 00 00 70 e0 00 00:00:23.472 READ DMA c8 00 00 00 08 00 00 0e 00 00 68 e0 00 00:00:23.471 READ DMA c8 00 00 00 08 00 00 0e 00 00 60 e0 00 00:00:23.471 READ DMA Error 1273 [12] occurred at disk power-on lifetime: 36580 hours (1524 days + 4 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 0e 00 00 85 e0 00 Error: UNC at LBA = 0x0e000085 = 234881157 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 02 00 00 00 0e 00 00 00 e0 00 00:00:19.787 READ DMA EXT 25 00 00 02 00 00 00 0c 00 00 00 e0 00 00:00:19.780 READ DMA EXT 25 00 00 02 00 00 00 0a 00 00 00 e0 00 00:00:19.769 READ DMA EXT 25 00 00 02 00 00 00 08 00 00 00 e0 00 00:00:19.762 READ DMA EXT c8 00 00 00 08 00 09 08 00 40 20 e9 00 00:00:19.756 READ DMA Error 1272 [11] occurred at disk power-on lifetime: 36580 hours (1524 days + 4 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 52 00 00 f3 e0 00 Error: UNC at LBA = 0x520000f3 = 1375731955 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- c8 00 00 00 08 00 00 52 00 00 f0 e0 00 00:00:30.693 READ DMA c8 00 00 00 08 00 00 52 00 00 e8 e0 00 00:00:30.693 READ DMA c8 00 00 00 08 00 00 52 00 00 e0 e0 00 00:00:30.693 READ DMA c8 00 00 00 08 00 00 52 00 00 d8 e0 00 00:00:30.693 READ DMA c8 00 00 00 08 00 00 52 00 00 d0 e0 00 00:00:30.692 READ DMA Error 1271 [10] occurred at disk power-on lifetime: 36580 hours (1524 days + 4 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 52 00 00 f3 e0 00 Error: UNC at LBA = 0x520000f3 = 1375731955 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 02 00 00 00 52 00 00 00 e0 00 00:00:27.078 READ DMA EXT 25 00 00 02 00 00 00 50 00 00 00 e0 00 00:00:27.073 READ DMA EXT 25 00 00 02 00 00 00 4e 00 00 00 e0 00 00:00:27.070 READ DMA EXT 25 00 00 02 00 00 00 4c 00 00 00 e0 00 00:00:27.067 READ DMA EXT 25 00 00 02 00 00 00 4a 00 00 00 e0 00 00:00:27.063 READ DMA EXT SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Interrupted (host reset) 90% 36605 - # 2 Short offline Completed without error 00% 36599 - # 3 Short offline Interrupted (host reset) 90% 36594 - # 4 Short offline Interrupted (host reset) 90% 36586 - # 5 Short offline Interrupted (host reset) 90% 36581 - # 6 Short offline Interrupted (host reset) 90% 36577 - # 7 Short offline Interrupted (host reset) 90% 36566 - # 8 Short offline Interrupted (host reset) 90% 36562 - # 9 Short offline Interrupted (host reset) 90% 36556 - #10 Short offline Completed without error 00% 36551 - #11 Short offline Interrupted (host reset) 90% 36544 - #12 Short offline Interrupted (host reset) 90% 36539 - #13 Short offline Interrupted (host reset) 90% 36534 - #14 Short offline Interrupted (host reset) 90% 36529 - #15 Short offline Interrupted (host reset) 90% 36524 - #16 Short offline Interrupted (host reset) 90% 36520 - #17 Short offline Completed without error 00% 36496 - #18 Short offline Completed without error 00% 36471 - #19 Short offline Completed without error 00% 36448 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Commands not supported Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x000a 2 1 Device-to-host register FISes sent due to a COMRESET 0x0001 2 0 Command failed due to ICRC error 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS /dev/sdd === START OF INFORMATION SECTION === Model Family: Seagate Barracuda 7200.12 Device Model: ST3500418AS Serial Number: -- LU WWN Device Id: 5 000c50 ... Firmware Version: CC44 User Capacity: 500,107,862,016 bytes [500 GB] Sector Size: 512 bytes logical/physical Rotation Rate: 7200 rpm Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 2.6, 3.0 Gb/s Local Time is: Mon Jul 30 08:25:15 2018 WIB ==> WARNING: A firmware update for this drive may be available, see the following Seagate web pages: http://knowledge.seagate.com/articles/en_US/FAQ/207931en http://knowledge.seagate.com/articles/en_US/FAQ/213891en SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM level is: 208 (intermediate), recommended: 208 APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, NOT FROZEN [SEC1] Write SCT (Get) Feature Control Command failed: Read of ATA output registers not implemented [JMicron] Wt Cache Reorder: Unknown (SCT Feature Control command failed) === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED See vendor-specific Attribute list for marginal Attributes. General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 600) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 95) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x103f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 116 099 006 - 115343190 3 Spin_Up_Time PO---- 098 097 000 - 0 4 Start_Stop_Count -O--CK 100 100 020 - 522 5 Reallocated_Sector_Ct PO--CK 100 100 036 - 0 7 Seek_Error_Rate POSR-- 064 060 030 - 3015601 9 Power_On_Hours -O--CK 085 085 000 - 13546 10 Spin_Retry_Count PO--C- 100 100 097 - 0 12 Power_Cycle_Count -O--CK 100 100 020 - 529 183 Runtime_Bad_Block ------ 100 100 000 - 0 184 End-to-End_Error -O--CK 100 100 099 - 0 187 Reported_Uncorrect -O--CK 100 100 000 - 0 188 Command_Timeout -O--CK 100 001 000 - 893366960356 189 High_Fly_Writes -O-RCK 100 100 000 - 0 190 Airflow_Temperature_Cel -O---K 052 043 045 Past 48 (Min/Max 48/48 #78) 194 Temperature_Celsius -O---K 048 057 000 - 48 (0 10 0 0 0) 195 Hardware_ECC_Recovered -O-RC- 023 015 000 - 115343190 197 Current_Pending_Sector -O--C- 100 100 000 - 0 198 Offline_Uncorrectable ----C- 100 100 000 - 0 199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 240 Head_Flying_Hours ------ 100 253 000 - 14672 (143 118 0) 241 Total_LBAs_Written ------ 100 253 000 - 1951632689 242 Total_LBAs_Read ------ 100 253 000 - 221526204 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning ATA_READ_LOG_EXT (addr=0x00:0x00, page=0, n=1) failed: 48-bit ATA commands not implemented [JMicron] Read GP Log Directory failed SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 SL R/O 5 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 SL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 SL R/O 1 NCQ Command Error log 0x11 SL R/O 1 SATA Phy Event Counters log 0x21 SL R/O 1 Write stream error log 0x22 SL R/O 1 Read stream error log 0x80-0x9f SL R/W 16 Host vendor specific log 0xa1 SL VS 20 Device vendor specific log 0xa8 SL VS 129 Device vendor specific log 0xa9 SL VS 1 Device vendor specific log 0xbd SL VS 252 Device vendor specific log 0xc0 SL VS 1 Device vendor specific log 0xe0 SL R/W 1 SCT Command/Status 0xe1 SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log (GP Log 0x03) not supported SMART Error Log Version: 1 No Errors Logged SMART Extended Self-test Log (GP Log 0x07) not supported SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 13541 - # 2 Short offline Completed without error 00% 13517 - # 3 Short offline Completed without error 00% 13493 - # 4 Short offline Completed without error 00% 13469 - # 5 Short offline Completed without error 00% 13445 - # 6 Short offline Completed without error 00% 13422 - # 7 Short offline Completed without error 00% 13398 - # 8 Short offline Completed without error 00% 13374 - # 9 Short offline Completed without error 00% 13350 - #10 Short offline Completed without error 00% 13326 - #11 Short offline Completed without error 00% 13316 - #12 Short offline Completed without error 00% 13278 - #13 Short offline Completed without error 00% 13254 - #14 Short offline Completed without error 00% 13230 - #15 Short offline Completed without error 00% 13206 - #16 Short offline Completed without error 00% 13182 - #17 Short offline Completed without error 00% 13159 - #18 Short offline Completed without error 00% 13135 - #19 Short offline Completed without error 00% 13110 - #20 Short offline Completed without error 00% 13087 - #21 Short offline Completed without error 00% 13063 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 522 (0x020a) SCT Support Level: 1 Device State: Active (0) Current Temperature: 48 Celsius Power Cycle Min/Max Temperature: 48/48 Celsius Lifetime Min/Max Temperature: 10/57 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 10 minutes Temperature Logging Interval: 59 minutes Min/Max recommended Temperature: 14/55 Celsius Min/Max Temperature Limit: 10/60 Celsius Temperature History Size (Index): 128 (75) Index Estimated Time Temperature Celsius 76 2018-07-25 03:01 50 ******************************* ... ..( 2 skipped). .. ******************************* 79 2018-07-25 05:58 50 ******************************* 80 2018-07-25 06:57 51 ******************************** 81 2018-07-25 07:56 51 ******************************** 82 2018-07-25 08:55 50 ******************************* 83 2018-07-25 09:54 ? - 84 2018-07-25 10:53 49 ****************************** 85 2018-07-25 11:52 ? - 86 2018-07-25 12:51 49 ****************************** 87 2018-07-25 13:50 ? - 88 2018-07-25 14:49 49 ****************************** ... ..( 4 skipped). .. ****************************** 93 2018-07-25 19:44 49 ****************************** 94 2018-07-25 20:43 48 ***************************** ... ..( 3 skipped). .. ***************************** 98 2018-07-26 00:39 48 ***************************** 99 2018-07-26 01:38 47 **************************** 100 2018-07-26 02:37 46 *************************** ... ..( 2 skipped). .. *************************** 103 2018-07-26 05:34 46 *************************** 104 2018-07-26 06:33 47 **************************** 105 2018-07-26 07:32 48 ***************************** 106 2018-07-26 08:31 49 ****************************** 107 2018-07-26 09:30 49 ****************************** 108 2018-07-26 10:29 50 ******************************* 109 2018-07-26 11:28 51 ******************************** 110 2018-07-26 12:27 52 ********************************* ... ..( 2 skipped). .. ********************************* 113 2018-07-26 15:24 52 ********************************* 114 2018-07-26 16:23 51 ******************************** ... ..( 6 skipped). .. ******************************** 121 2018-07-26 23:16 51 ******************************** 122 2018-07-27 00:15 50 ******************************* ... ..( 3 skipped). .. ******************************* 126 2018-07-27 04:11 50 ******************************* 127 2018-07-27 05:10 51 ******************************** 0 2018-07-27 06:09 52 ********************************* 1 2018-07-27 07:08 52 ********************************* 2 2018-07-27 08:07 52 ********************************* 3 2018-07-27 09:06 53 ********************************** 4 2018-07-27 10:05 52 ********************************* ... ..( 3 skipped). .. ********************************* 8 2018-07-27 14:01 52 ********************************* 9 2018-07-27 15:00 51 ******************************** 10 2018-07-27 15:59 51 ******************************** 11 2018-07-27 16:58 50 ******************************* 12 2018-07-27 17:57 50 ******************************* 13 2018-07-27 18:56 49 ****************************** ... ..( 2 skipped). .. ****************************** 16 2018-07-27 21:53 49 ****************************** 17 2018-07-27 22:52 50 ******************************* 18 2018-07-27 23:51 49 ****************************** 19 2018-07-28 00:50 48 ***************************** 20 2018-07-28 01:49 47 **************************** 21 2018-07-28 02:48 47 **************************** 22 2018-07-28 03:47 47 **************************** 23 2018-07-28 04:46 46 *************************** 24 2018-07-28 05:45 47 **************************** 25 2018-07-28 06:44 49 ****************************** 26 2018-07-28 07:43 50 ******************************* 27 2018-07-28 08:42 50 ******************************* 28 2018-07-28 09:41 51 ******************************** 29 2018-07-28 10:40 52 ********************************* 30 2018-07-28 11:39 ? - 31 2018-07-28 12:38 54 *********************************** 32 2018-07-28 13:37 54 *********************************** 33 2018-07-28 14:36 53 ********************************** 34 2018-07-28 15:35 53 ********************************** 35 2018-07-28 16:34 53 ********************************** 36 2018-07-28 17:33 52 ********************************* 37 2018-07-28 18:32 52 ********************************* 38 2018-07-28 19:31 52 ********************************* 39 2018-07-28 20:30 51 ******************************** 40 2018-07-28 21:29 51 ******************************** 41 2018-07-28 22:28 50 ******************************* 42 2018-07-28 23:27 50 ******************************* 43 2018-07-29 00:26 50 ******************************* 44 2018-07-29 01:25 49 ****************************** 45 2018-07-29 02:24 49 ****************************** 46 2018-07-29 03:23 47 **************************** 47 2018-07-29 04:22 47 **************************** 48 2018-07-29 05:21 47 **************************** 49 2018-07-29 06:20 48 ***************************** 50 2018-07-29 07:19 49 ****************************** 51 2018-07-29 08:18 49 ****************************** 52 2018-07-29 09:17 50 ******************************* ... ..( 3 skipped). .. ******************************* 56 2018-07-29 13:13 50 ******************************* 57 2018-07-29 14:12 51 ******************************** 58 2018-07-29 15:11 50 ******************************* 59 2018-07-29 16:10 50 ******************************* 60 2018-07-29 17:09 50 ******************************* 61 2018-07-29 18:08 49 ****************************** 62 2018-07-29 19:07 49 ****************************** 63 2018-07-29 20:06 49 ****************************** 64 2018-07-29 21:05 ? - 65 2018-07-29 22:04 48 ***************************** 66 2018-07-29 23:03 48 ***************************** 67 2018-07-30 00:02 49 ****************************** ... ..( 3 skipped). .. ****************************** 71 2018-07-30 03:58 49 ****************************** 72 2018-07-30 04:57 47 **************************** 73 2018-07-30 05:56 ? - 74 2018-07-30 06:55 48 ***************************** 75 2018-07-30 07:54 48 ***************************** Write SCT (Get) Error Recovery Control Command failed: Read of ATA output registers not implemented [JMicron] SCT (Get) Error Recovery Control command failed Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported ATA_READ_LOG_EXT (addr=0x11:0x00, page=0, n=1) failed: 48-bit ATA commands not implemented [JMicron] Read SATA Phy Event Counters failed