/dev/sda === START OF INFORMATION SECTION === Model Family: Seagate Barracuda 7200.14 (AF) Device Model: ST1000DM003-1SB102 Serial Number: -- LU WWN Device Id: 5 000c50 ... Firmware Version: CC43 User Capacity: 1,000,203,804,160 bytes [1.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 7200 rpm Form Factor: 3.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Sun Jan 26 16:42:07 2020 EET SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 128 (minimum power consumption without standby) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Unavailable === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x73) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 106) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x1085) SCT Status supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 081 064 006 - 151353148 3 Spin_Up_Time PO---- 097 096 000 - 0 4 Start_Stop_Count -O--CK 100 100 020 - 867 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 7 Seek_Error_Rate POSR-- 100 253 045 - 572386 9 Power_On_Hours -O--CK 098 098 000 - 2308 10 Spin_Retry_Count PO--C- 100 100 097 - 0 12 Power_Cycle_Count -O--CK 100 100 020 - 855 183 Runtime_Bad_Block -O--CK 100 100 000 - 0 184 End-to-End_Error -O--CK 100 100 099 - 0 187 Reported_Uncorrect -O--CK 100 100 000 - 0 188 Command_Timeout -O--CK 100 100 000 - 0 0 0 189 High_Fly_Writes -O-RCK 100 100 000 - 0 190 Airflow_Temperature_Cel -O---K 062 057 040 - 38 (Min/Max 22/38) 193 Load_Cycle_Count -O--CK 100 100 000 - 867 194 Temperature_Celsius -O---K 038 018 000 - 38 (0 18 0 0 0) 195 Hardware_ECC_Recovered -O-RC- 006 003 000 - 151353148 197 Current_Pending_Sector -O--C- 100 100 000 - 0 198 Offline_Uncorrectable ----C- 100 100 000 - 0 199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 240 Head_Flying_Hours ------ 100 253 000 - 2301h+43m+57.960s 241 Total_LBAs_Written ------ 100 253 000 - 1076524495 242 Total_LBAs_Read ------ 100 253 000 - 297546853 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 5 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 8 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x21 GPL R/O 1 Write stream error log 0x22 GPL R/O 1 Read stream error log 0x24 GPL R/O 512 Current Device Internal Status Data log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa1 GPL,SL VS 20 Device vendor specific log 0xa2 GPL VS 4120 Device vendor specific log 0xa8 GPL,SL VS 129 Device vendor specific log 0xa9 GPL,SL VS 1 Device vendor specific log 0xab GPL VS 1 Device vendor specific log 0xb0 GPL VS 4800 Device vendor specific log 0xbe-0xbf GPL VS 65535 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL,SL VS 10 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (5 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 522 (0x020a) SCT Support Level: 1 Device State: Active (0) Current Temperature: 38 Celsius Power Cycle Min/Max Temperature: 21/38 Celsius Lifetime Min/Max Temperature: 18/40 Celsius Under/Over Temperature Limit Count: 0/0 SCT Data Table command not supported SCT Error Recovery Control command not supported Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 855 --- Lifetime Power-On Resets 0x01 0x010 4 2308 --- Power-on Hours 0x01 0x018 6 1076524495 --- Logical Sectors Written 0x01 0x020 6 4115990 --- Number of Write Commands 0x01 0x028 6 297607237 --- Logical Sectors Read 0x01 0x030 6 1517730 --- Number of Read Commands 0x01 0x038 6 - --- Date and Time TimeStamp 0x03 ===== = = === == Rotating Media Statistics (rev 1) == 0x03 0x008 4 2301 --- Spindle Motor Power-on Hours 0x03 0x010 4 2301 --- Head Flying Hours 0x03 0x018 4 867 --- Head Load Events 0x03 0x020 4 0 --- Number of Reallocated Logical Sectors 0x03 0x028 4 0 --- Read Recovery Attempts 0x03 0x030 4 0 --- Number of Mechanical Start Failures 0x03 0x038 4 0 --- Number of Realloc. Candidate Logical Sectors 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors 0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion 0x05 ===== = = === == Temperature Statistics (rev 1) == 0x05 0x008 1 38 --- Current Temperature 0x05 0x010 1 38 --- Average Short Term Temperature 0x05 0x018 1 37 --- Average Long Term Temperature 0x05 0x020 1 43 --- Highest Temperature 0x05 0x028 1 20 --- Lowest Temperature 0x05 0x030 1 39 --- Highest Average Short Term Temperature 0x05 0x038 1 29 --- Lowest Average Short Term Temperature 0x05 0x040 1 38 --- Highest Average Long Term Temperature 0x05 0x048 1 29 --- Lowest Average Long Term Temperature 0x05 0x050 4 0 --- Time in Over-Temperature 0x05 0x058 1 55 --- Specified Maximum Operating Temperature 0x05 0x060 4 0 --- Time in Under-Temperature 0x05 0x068 1 13 --- Specified Minimum Operating Temperature |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x000a 2 2 Device-to-host register FISes sent due to a COMRESET 0x0001 2 0 Command failed due to ICRC error 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS /dev/sdb === START OF INFORMATION SECTION === Model Family: Western Digital Blue Device Model: WDC WD7500AZEX-00ZF5A0 Serial Number: -- LU WWN Device Id: 5 0014ee ... Firmware Version: 80.00A80 User Capacity: 750,155,292,160 bytes [750 GB] Sector Sizes: 512 bytes logical, 4096 bytes physical Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS (minor revision not indicated) SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Sun Jan 26 16:42:08 2020 EET SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 9000) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 104) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x30b5) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 3 Spin_Up_Time POS--K 176 171 021 - 2200 4 Start_Stop_Count -O--CK 095 095 000 - 5100 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 9 Power_On_Hours -O--CK 084 084 000 - 12321 10 Spin_Retry_Count -O--CK 100 100 000 - 0 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 12 Power_Cycle_Count -O--CK 095 095 000 - 5097 192 Power-Off_Retract_Count -O--CK 200 200 000 - 306 193 Load_Cycle_Count -O--CK 199 199 000 - 4793 194 Temperature_Celsius -O---K 105 097 000 - 38 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 0 198 Offline_Uncorrectable ----CK 200 200 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 123 000 - 21779 200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb5 GPL,SL VS 1 Device vendor specific log 0xb6 GPL VS 1 Device vendor specific log 0xb7 GPL,SL VS 1 Device vendor specific log 0xbd GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 93 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) Device Error Count: 13498 (device log contains only the most recent 24 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 13498 [9] occurred at disk power-on lifetime: 10277 hours (428 days + 5 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- 61 00 00 00 00 00 c2 4f 53 e0 00 Device Fault; Error: ABRT Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- b0 00 d8 00 00 00 00 00 c2 4f 00 e0 08 00:00:13.685 SMART ENABLE OPERATIONS 91 00 00 00 3f 00 00 0f 00 00 00 ef 08 00:00:13.685 INITIALIZE DEVICE PARAMETERS [OBS-6] c6 00 00 00 10 00 00 00 00 00 00 e0 08 00:00:13.492 SET MULTIPLE MODE 91 00 00 00 3f 00 00 0f 00 00 00 ef 08 00:00:13.492 INITIALIZE DEVICE PARAMETERS [OBS-6] 10 00 00 00 00 00 00 00 00 00 00 e0 08 00:00:13.491 RECALIBRATE [OBS-4] Error 13497 [8] occurred at disk power-on lifetime: 10277 hours (428 days + 5 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- 61 00 00 00 00 00 c2 4f 53 e0 00 Device Fault; Error: ABRT Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- b0 00 d8 00 00 00 00 00 c2 4f 00 e0 08 00:00:32.159 SMART ENABLE OPERATIONS 91 00 00 00 3f 00 00 0f 00 00 00 ef 08 00:00:32.159 INITIALIZE DEVICE PARAMETERS [OBS-6] c6 00 00 00 10 00 00 00 00 00 00 e0 08 00:00:31.969 SET MULTIPLE MODE 91 00 00 00 3f 00 00 0f 00 00 00 ef 08 00:00:31.969 INITIALIZE DEVICE PARAMETERS [OBS-6] 10 00 00 00 00 00 00 00 00 00 00 e0 08 00:00:31.967 RECALIBRATE [OBS-4] Error 13496 [7] occurred at disk power-on lifetime: 10277 hours (428 days + 5 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- 61 00 00 00 00 00 c2 4f 53 e0 00 Device Fault; Error: ABRT Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- b0 00 d8 00 00 00 00 00 c2 4f 00 e0 08 00:00:13.286 SMART ENABLE OPERATIONS 91 00 00 00 3f 00 00 0f 00 00 00 ef 08 00:00:13.286 INITIALIZE DEVICE PARAMETERS [OBS-6] c6 00 00 00 10 00 00 00 00 00 00 e0 08 00:00:13.098 SET MULTIPLE MODE 91 00 00 00 3f 00 00 0f 00 00 00 ef 08 00:00:13.097 INITIALIZE DEVICE PARAMETERS [OBS-6] 10 00 00 00 00 00 00 00 00 00 00 e0 08 00:00:13.097 RECALIBRATE [OBS-4] Error 13495 [6] occurred at disk power-on lifetime: 10245 hours (426 days + 21 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- 61 00 80 00 00 00 0a a3 50 e0 00 Device Fault; Error: ABRT 128 sectors at LBA = 0x000aa350 = 697168 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 80 00 00 00 0a a3 50 e0 00 00:02:26.239 READ DMA EXT 25 00 00 00 60 00 00 00 0a a2 f0 e0 00 00:02:26.223 READ DMA EXT 25 00 00 00 80 00 00 00 0a a3 50 e0 00 00:02:25.226 READ DMA EXT 25 00 00 00 60 00 00 00 0a a2 f0 e0 00 00:02:25.225 READ DMA EXT 25 00 00 00 58 00 00 00 0a a2 98 e0 00 00:02:24.946 READ DMA EXT Error 13494 [5] occurred at disk power-on lifetime: 10245 hours (426 days + 21 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- 61 00 60 00 00 00 0a a2 f0 e0 00 Device Fault; Error: ABRT 96 sectors at LBA = 0x000aa2f0 = 697072 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 60 00 00 00 0a a2 f0 e0 00 00:02:26.223 READ DMA EXT 25 00 00 00 80 00 00 00 0a a3 50 e0 00 00:02:25.226 READ DMA EXT 25 00 00 00 60 00 00 00 0a a2 f0 e0 00 00:02:25.225 READ DMA EXT 25 00 00 00 58 00 00 00 0a a2 98 e0 00 00:02:24.946 READ DMA EXT 25 00 00 00 08 00 00 00 60 2e b8 e0 00 00:02:24.946 READ DMA EXT Error 13493 [4] occurred at disk power-on lifetime: 10245 hours (426 days + 21 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- 61 00 80 00 00 00 0a a3 50 e0 00 Device Fault; Error: ABRT 128 sectors at LBA = 0x000aa350 = 697168 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 80 00 00 00 0a a3 50 e0 00 00:02:25.226 READ DMA EXT 25 00 00 00 60 00 00 00 0a a2 f0 e0 00 00:02:25.225 READ DMA EXT 25 00 00 00 58 00 00 00 0a a2 98 e0 00 00:02:24.946 READ DMA EXT 25 00 00 00 08 00 00 00 60 2e b8 e0 00 00:02:24.946 READ DMA EXT 25 00 00 00 10 00 00 00 60 2e 60 e0 00 00:02:24.946 READ DMA EXT Error 13492 [3] occurred at disk power-on lifetime: 10245 hours (426 days + 21 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- 61 00 60 00 00 00 0a a2 f0 e0 00 Device Fault; Error: ABRT 96 sectors at LBA = 0x000aa2f0 = 697072 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 60 00 00 00 0a a2 f0 e0 00 00:02:25.225 READ DMA EXT 25 00 00 00 58 00 00 00 0a a2 98 e0 00 00:02:24.946 READ DMA EXT 25 00 00 00 08 00 00 00 60 2e b8 e0 00 00:02:24.946 READ DMA EXT 25 00 00 00 10 00 00 00 60 2e 60 e0 00 00:02:24.946 READ DMA EXT 25 00 00 00 18 00 00 00 60 2e 38 e0 00 00:02:24.946 READ DMA EXT Error 13491 [2] occurred at disk power-on lifetime: 10245 hours (426 days + 21 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- 61 00 00 00 00 00 c2 4f 53 e0 00 Device Fault; Error: ABRT Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- b0 00 d8 00 00 00 00 00 c2 4f 00 e0 08 00:00:48.243 SMART ENABLE OPERATIONS 91 00 00 00 3f 00 00 0f 00 00 00 ef 08 00:00:48.243 INITIALIZE DEVICE PARAMETERS [OBS-6] c6 00 00 00 10 00 00 00 00 00 00 e0 08 00:00:48.110 SET MULTIPLE MODE 91 00 00 00 3f 00 00 0f 00 00 00 ef 08 00:00:48.109 INITIALIZE DEVICE PARAMETERS [OBS-6] 10 00 00 00 00 00 00 00 00 00 00 e0 08 00:00:48.108 RECALIBRATE [OBS-4] SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 258 (0x0102) SCT Support Level: 1 Device State: Active (0) Current Temperature: 38 Celsius Power Cycle Min/Max Temperature: 22/38 Celsius Lifetime Min/Max Temperature: 22/46 Celsius Under/Over Temperature Limit Count: 0/0 Vendor specific: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 478 (16) Index Estimated Time Temperature Celsius 17 2020-01-26 08:45 40 ********************* ... ..( 12 skipped). .. ********************* 30 2020-01-26 08:58 40 ********************* 31 2020-01-26 08:59 ? - 32 2020-01-26 09:00 22 *** 33 2020-01-26 09:01 23 **** 34 2020-01-26 09:02 24 ***** 35 2020-01-26 09:03 25 ****** 36 2020-01-26 09:04 26 ******* 37 2020-01-26 09:05 26 ******* 38 2020-01-26 09:06 26 ******* 39 2020-01-26 09:07 27 ******** 40 2020-01-26 09:08 27 ******** 41 2020-01-26 09:09 28 ********* 42 2020-01-26 09:10 28 ********* 43 2020-01-26 09:11 29 ********** 44 2020-01-26 09:12 29 ********** 45 2020-01-26 09:13 30 *********** 46 2020-01-26 09:14 30 *********** 47 2020-01-26 09:15 30 *********** 48 2020-01-26 09:16 31 ************ 49 2020-01-26 09:17 31 ************ 50 2020-01-26 09:18 31 ************ 51 2020-01-26 09:19 32 ************* 52 2020-01-26 09:20 32 ************* 53 2020-01-26 09:21 33 ************** 54 2020-01-26 09:22 33 ************** 55 2020-01-26 09:23 33 ************** 56 2020-01-26 09:24 34 *************** 57 2020-01-26 09:25 34 *************** 58 2020-01-26 09:26 34 *************** 59 2020-01-26 09:27 35 **************** ... ..( 7 skipped). .. **************** 67 2020-01-26 09:35 35 **************** 68 2020-01-26 09:36 36 ***************** ... ..( 5 skipped). .. ***************** 74 2020-01-26 09:42 36 ***************** 75 2020-01-26 09:43 37 ****************** ... ..( 8 skipped). .. ****************** 84 2020-01-26 09:52 37 ****************** 85 2020-01-26 09:53 38 ******************* ... ..( 2 skipped). .. ******************* 88 2020-01-26 09:56 38 ******************* 89 2020-01-26 09:57 40 ********************* ... ..( 90 skipped). .. ********************* 180 2020-01-26 11:28 40 ********************* 181 2020-01-26 11:29 ? - 182 2020-01-26 11:30 24 ***** 183 2020-01-26 11:31 24 ***** 184 2020-01-26 11:32 25 ****** 185 2020-01-26 11:33 26 ******* 186 2020-01-26 11:34 26 ******* 187 2020-01-26 11:35 26 ******* 188 2020-01-26 11:36 27 ******** 189 2020-01-26 11:37 27 ******** 190 2020-01-26 11:38 28 ********* 191 2020-01-26 11:39 28 ********* 192 2020-01-26 11:40 29 ********** 193 2020-01-26 11:41 29 ********** 194 2020-01-26 11:42 30 *********** ... ..( 2 skipped). .. *********** 197 2020-01-26 11:45 30 *********** 198 2020-01-26 11:46 31 ************ 199 2020-01-26 11:47 31 ************ 200 2020-01-26 11:48 32 ************* 201 2020-01-26 11:49 32 ************* 202 2020-01-26 11:50 33 ************** 203 2020-01-26 11:51 33 ************** 204 2020-01-26 11:52 33 ************** 205 2020-01-26 11:53 34 *************** ... ..( 2 skipped). .. *************** 208 2020-01-26 11:56 34 *************** 209 2020-01-26 11:57 35 **************** ... ..( 8 skipped). .. **************** 218 2020-01-26 12:06 35 **************** 219 2020-01-26 12:07 36 ***************** ... ..( 5 skipped). .. ***************** 225 2020-01-26 12:13 36 ***************** 226 2020-01-26 12:14 37 ****************** ... ..( 9 skipped). .. ****************** 236 2020-01-26 12:24 37 ****************** 237 2020-01-26 12:25 38 ******************* ... ..( 15 skipped). .. ******************* 253 2020-01-26 12:41 38 ******************* 254 2020-01-26 12:42 39 ******************** ... ..(203 skipped). .. ******************** 458 2020-01-26 16:06 39 ******************** 459 2020-01-26 16:07 40 ********************* ... ..( 34 skipped). .. ********************* 16 2020-01-26 16:42 40 ********************* SCT Error Recovery Control command not supported Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 2 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 1 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x8000 4 3398 Vendor specific /dev/sdc === START OF INFORMATION SECTION === Model Family: Western Digital Caviar Black Device Model: WDC WD5001AALS-00L3B2 Serial Number: -- LU WWN Device Id: 5 0014ee ... Firmware Version: 01.03B01 User Capacity: 500,106,780,160 bytes [500 GB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS (minor revision not indicated) SATA Version is: SATA 2.5, 3.0 Gb/s Local Time is: Sun Jan 26 16:42:08 2020 EET SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Disabled APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x84) Offline data collection activity was suspended by an interrupting command from host. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (10800) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 127) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x3037) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 3 Spin_Up_Time POS--K 162 159 021 - 4875 4 Start_Stop_Count -O--CK 086 086 000 - 14316 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-K 100 253 000 - 0 9 Power_On_Hours -O--CK 074 074 000 - 19478 10 Spin_Retry_Count -O--CK 100 100 000 - 0 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 12 Power_Cycle_Count -O--CK 093 093 000 - 7641 192 Power-Off_Retract_Count -O--CK 200 200 000 - 620 193 Load_Cycle_Count -O--CK 196 196 000 - 14316 194 Temperature_Celsius -O---K 104 095 000 - 43 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 1 198 Offline_Uncorrectable ----CK 200 200 000 - 1 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb7 GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 24 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) Device Error Count: 200 (device log contains only the most recent 24 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 200 [7] occurred at disk power-on lifetime: 18058 hours (752 days + 10 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 00 60 59 57 e0 00 Error: UNC at LBA = 0x00605957 = 6314327 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- c8 00 00 00 08 00 00 00 60 59 50 e0 08 03:28:33.346 READ DMA 27 00 00 00 00 00 00 00 00 00 00 e0 08 03:28:33.345 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] ec 00 00 00 00 00 00 00 00 00 00 a0 08 03:28:33.343 IDENTIFY DEVICE ef 00 03 00 46 00 00 00 00 00 00 a0 08 03:28:33.341 SET FEATURES [Set transfer mode] 27 00 00 00 00 00 00 00 00 00 00 e0 08 03:28:33.340 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] Error 199 [6] occurred at disk power-on lifetime: 18058 hours (752 days + 10 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 00 60 59 57 e0 00 Error: UNC at LBA = 0x00605957 = 6314327 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- c8 00 00 00 08 00 00 00 60 59 50 e0 08 03:28:30.989 READ DMA 27 00 00 00 00 00 00 00 00 00 00 e0 08 03:28:30.988 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] ec 00 00 00 00 00 00 00 00 00 00 a0 08 03:28:30.985 IDENTIFY DEVICE ef 00 03 00 46 00 00 00 00 00 00 a0 08 03:28:30.985 SET FEATURES [Set transfer mode] 27 00 00 00 00 00 00 00 00 00 00 e0 08 03:28:30.985 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] Error 198 [5] occurred at disk power-on lifetime: 18058 hours (752 days + 10 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 00 60 59 57 e0 00 Error: UNC at LBA = 0x00605957 = 6314327 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- c8 00 00 00 08 00 00 00 60 59 50 e0 08 03:28:28.785 READ DMA c8 00 00 00 08 00 00 00 db 92 58 e3 08 03:28:28.778 READ DMA c8 00 00 00 08 00 00 00 93 b9 a0 e3 08 03:28:28.768 READ DMA 25 00 00 00 10 00 00 11 3c ea b0 e0 08 03:28:28.767 READ DMA EXT 25 00 00 00 08 00 00 11 3d 07 10 e0 08 03:28:28.767 READ DMA EXT Error 197 [4] occurred at disk power-on lifetime: 18058 hours (752 days + 10 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 00 60 59 57 e0 00 Error: UNC at LBA = 0x00605957 = 6314327 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- c8 00 00 00 08 00 00 00 60 59 50 e0 08 03:28:25.970 READ DMA 27 00 00 00 00 00 00 00 00 00 00 e0 08 03:28:25.968 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] ec 00 00 00 00 00 00 00 00 00 00 a0 08 03:28:25.965 IDENTIFY DEVICE ef 00 03 00 46 00 00 00 00 00 00 a0 08 03:28:25.965 SET FEATURES [Set transfer mode] 27 00 00 00 00 00 00 00 00 00 00 e0 08 03:28:25.965 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] Error 196 [3] occurred at disk power-on lifetime: 18058 hours (752 days + 10 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 00 60 59 57 e0 00 Error: UNC at LBA = 0x00605957 = 6314327 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- c8 00 00 00 08 00 00 00 60 59 50 e0 08 03:28:23.767 READ DMA 25 00 00 00 08 00 00 11 3c fb d0 e0 08 03:28:23.767 READ DMA EXT c8 00 00 00 20 00 00 00 60 83 c8 e0 08 03:28:23.765 READ DMA c8 00 00 00 60 00 00 00 60 83 68 e0 08 03:28:23.759 READ DMA c8 00 00 00 30 00 00 00 60 83 38 e0 08 03:28:23.758 READ DMA Error 195 [2] occurred at disk power-on lifetime: 18058 hours (752 days + 10 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 00 60 59 57 e0 00 Error: UNC at LBA = 0x00605957 = 6314327 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- c8 00 00 00 10 00 00 00 60 59 48 e0 08 03:28:17.679 READ DMA c8 00 00 00 10 00 00 00 60 59 30 e0 08 03:28:17.679 READ DMA c8 00 00 00 08 00 00 00 60 59 20 e0 08 03:28:17.679 READ DMA c8 00 00 00 18 00 00 00 60 58 f0 e0 08 03:28:17.679 READ DMA c8 00 00 00 08 00 00 00 60 59 10 e0 08 03:28:17.679 READ DMA Error 194 [1] occurred at disk power-on lifetime: 18036 hours (751 days + 12 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 00 60 59 57 e0 00 Error: UNC at LBA = 0x00605957 = 6314327 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- c8 00 00 00 01 00 00 00 60 59 57 e0 08 00:08:47.295 READ DMA 27 00 00 00 00 00 00 00 00 00 00 e0 08 00:08:47.295 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] ec 00 00 00 00 00 00 00 00 00 00 a0 08 00:08:47.292 IDENTIFY DEVICE ef 00 03 00 46 00 00 00 00 00 00 a0 08 00:08:47.291 SET FEATURES [Set transfer mode] 27 00 00 00 00 00 00 00 00 00 00 e0 08 00:08:47.291 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] Error 193 [0] occurred at disk power-on lifetime: 18036 hours (751 days + 12 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 00 60 59 57 e0 00 Error: UNC at LBA = 0x00605957 = 6314327 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- c8 00 00 00 01 00 00 00 60 59 57 e0 08 00:08:45.090 READ DMA 27 00 00 00 00 00 00 00 00 00 00 e0 08 00:08:45.090 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] ec 00 00 00 00 00 00 00 00 00 00 a0 08 00:08:45.088 IDENTIFY DEVICE ef 00 03 00 46 00 00 00 00 00 00 a0 08 00:08:45.086 SET FEATURES [Set transfer mode] 27 00 00 00 00 00 00 00 00 00 00 e0 08 00:08:45.085 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 2 SCT Version (vendor specific): 258 (0x0102) SCT Support Level: 1 Device State: SMART Off-line Data Collection executing in background (4) Current Temperature: 43 Celsius Power Cycle Min/Max Temperature: 24/43 Celsius Lifetime Min/Max Temperature: 22/53 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 128 (48) Index Estimated Time Temperature Celsius 49 2020-01-26 14:35 45 ************************** ... ..( 68 skipped). .. ************************** 118 2020-01-26 15:44 45 ************************** 119 2020-01-26 15:45 ? - 120 2020-01-26 15:46 24 ***** 121 2020-01-26 15:47 25 ****** 122 2020-01-26 15:48 26 ******* 123 2020-01-26 15:49 26 ******* 124 2020-01-26 15:50 28 ********* 125 2020-01-26 15:51 29 ********** 126 2020-01-26 15:52 29 ********** 127 2020-01-26 15:53 30 *********** 0 2020-01-26 15:54 30 *********** 1 2020-01-26 15:55 31 ************ 2 2020-01-26 15:56 32 ************* 3 2020-01-26 15:57 32 ************* 4 2020-01-26 15:58 33 ************** 5 2020-01-26 15:59 33 ************** 6 2020-01-26 16:00 34 *************** 7 2020-01-26 16:01 34 *************** 8 2020-01-26 16:02 34 *************** 9 2020-01-26 16:03 35 **************** 10 2020-01-26 16:04 35 **************** 11 2020-01-26 16:05 36 ***************** 12 2020-01-26 16:06 36 ***************** 13 2020-01-26 16:07 37 ****************** ... ..( 2 skipped). .. ****************** 16 2020-01-26 16:10 37 ****************** 17 2020-01-26 16:11 38 ******************* 18 2020-01-26 16:12 38 ******************* 19 2020-01-26 16:13 38 ******************* 20 2020-01-26 16:14 39 ******************** 21 2020-01-26 16:15 39 ******************** 22 2020-01-26 16:16 39 ******************** 23 2020-01-26 16:17 40 ********************* 24 2020-01-26 16:18 40 ********************* 25 2020-01-26 16:19 40 ********************* 26 2020-01-26 16:20 41 ********************** ... ..( 2 skipped). .. ********************** 29 2020-01-26 16:23 41 ********************** 30 2020-01-26 16:24 42 *********************** ... ..( 11 skipped). .. *********************** 42 2020-01-26 16:36 42 *********************** 43 2020-01-26 16:37 43 ************************ ... ..( 4 skipped). .. ************************ 48 2020-01-26 16:42 43 ************************ SCT Error Recovery Control command not supported Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x000a 2 0 Device-to-host register FISes sent due to a COMRESET 0x8000 4 3402 Vendor specific