/dev/sda smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.10.0-kali8-amd64] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Seagate Samsung SpinPoint M8 (AF) Device Model: ST1000LM024 HN-M101MBB Serial Number: -- LU WWN Device Id: 5 0004cf ... Firmware Version: 2AR20004 User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Size: 512 bytes logical/physical Rotation Rate: 5400 rpm Form Factor: 2.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 6 SATA Version is: SATA 3.0, 3.0 Gb/s (current: 3.0 Gb/s) Local Time is: Fri Jun 18 22:13:44 2021 CDT SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Disabled APM level is: 254 (maximum performance) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (13680) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 228) minutes. SCT capabilities: (0x003f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 100 100 051 - 19 2 Throughput_Performance -OS--K 252 252 000 - 0 3 Spin_Up_Time PO---K 090 081 025 - 3067 4 Start_Stop_Count -O--CK 064 064 000 - 37191 5 Reallocated_Sector_Ct PO--CK 252 252 010 - 0 7 Seek_Error_Rate -OSR-K 252 252 051 - 0 8 Seek_Time_Performance --S--K 252 252 015 - 0 9 Power_On_Hours -O--CK 100 100 000 - 28581 10 Spin_Retry_Count -O--CK 252 252 051 - 0 11 Calibration_Retry_Count -O--CK 100 100 000 - 509 12 Power_Cycle_Count -O--CK 096 096 000 - 4787 13 Read_Soft_Error_Rate -O-RCK 100 100 000 - 0 181 Program_Fail_Cnt_Total -O---K 097 097 000 - 73256704 191 G-Sense_Error_Rate -O---K 100 100 000 - 739 192 Power-Off_Retract_Count -O---K 252 252 000 - 0 193 Load_Cycle_Count -O--CK 041 041 000 - 600779 194 Temperature_Celsius -O---- 060 051 000 - 40 (Min/Max 10/50) 195 Hardware_ECC_Recovered -O-RCK 100 100 000 - 0 196 Reallocated_Event_Count -O--CK 252 252 000 - 0 197 Current_Pending_Sector -O--CK 252 252 000 - 0 198 Offline_Uncorrectable ----CK 252 252 000 - 0 199 UDMA_CRC_Error_Count -OS-CK 200 200 000 - 0 200 Multi_Zone_Error_Rate -O-R-K 100 100 000 - 8671 240 Head_Flying_Hours -O--CK 100 100 000 - 23745 241 Total_LBAs_Written -O--CK 096 090 000 - 6268568 242 Total_LBAs_Read -O--CK 089 088 000 - 15769470 254 Free_Fall_Sensor -O--CK 252 252 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 2 Comprehensive SMART error log 0x03 GPL R/O 2 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 2 Extended self-test log 0x08 GPL R/O 2 Power Conditions log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xc0-0xdf GPL,SL VS 16 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (2 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (2 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 27355 - # 2 Short offline Completed without error 00% 27033 - # 3 Short offline Completed without error 00% 26869 - # 4 Short offline Completed without error 00% 24293 - # 5 Short offline Completed without error 00% 24292 - # 6 Short offline Completed without error 00% 7256 - # 7 Short offline Interrupted (host reset) 90% 6891 - # 8 Short offline Completed without error 00% 6891 - # 9 Short offline Completed without error 00% 6890 - #10 Short offline Completed without error 00% 834 - #11 Short offline Completed without error 00% 0 - SMART Selective self-test log data structure revision number 0 Note: revision number not 1 implies that no selective self-test has ever been run SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Completed [00% left] (0-65535) 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 2 SCT Version (vendor specific): 256 (0x0100) Device State: Active (0) Current Temperature: 40 Celsius Power Cycle Min/Max Temperature: 28/40 Celsius Lifetime Min/Max Temperature: 10/50 Celsius Specified Max Operating Temperature: 80 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 5 minutes Temperature Logging Interval: 5 minutes Min/Max recommended Temperature: -5/80 Celsius Min/Max Temperature Limit: -10/85 Celsius Temperature History Size (Index): 128 (95) Index Estimated Time Temperature Celsius 96 2021-06-18 11:35 40 ********************* 97 2021-06-18 11:40 37 ****************** 98 2021-06-18 11:45 37 ****************** 99 2021-06-18 11:50 38 ******************* ... ..( 5 skipped). .. ******************* 105 2021-06-18 12:20 38 ******************* 106 2021-06-18 12:25 37 ****************** ... ..( 2 skipped). .. ****************** 109 2021-06-18 12:40 37 ****************** 110 2021-06-18 12:45 38 ******************* 111 2021-06-18 12:50 38 ******************* 112 2021-06-18 12:55 39 ******************** ... ..( 6 skipped). .. ******************** 119 2021-06-18 13:30 39 ******************** 120 2021-06-18 13:35 40 ********************* 121 2021-06-18 13:40 41 ********************** 122 2021-06-18 13:45 41 ********************** 123 2021-06-18 13:50 40 ********************* 124 2021-06-18 13:55 39 ******************** ... ..( 31 skipped). .. ******************** 28 2021-06-18 16:35 39 ******************** 29 2021-06-18 16:40 38 ******************* 30 2021-06-18 16:45 38 ******************* 31 2021-06-18 16:50 39 ******************** 32 2021-06-18 16:55 39 ******************** 33 2021-06-18 17:00 40 ********************* 34 2021-06-18 17:05 38 ******************* 35 2021-06-18 17:10 35 **************** 36 2021-06-18 17:15 32 ************* 37 2021-06-18 17:20 34 *************** ... ..( 4 skipped). .. *************** 42 2021-06-18 17:45 34 *************** 43 2021-06-18 17:50 35 **************** 44 2021-06-18 17:55 35 **************** 45 2021-06-18 18:00 36 ***************** 46 2021-06-18 18:05 36 ***************** 47 2021-06-18 18:10 36 ***************** 48 2021-06-18 18:15 35 **************** ... ..( 2 skipped). .. **************** 51 2021-06-18 18:30 35 **************** 52 2021-06-18 18:35 36 ***************** 53 2021-06-18 18:40 37 ****************** 54 2021-06-18 18:45 37 ****************** 55 2021-06-18 18:50 38 ******************* 56 2021-06-18 18:55 39 ******************** 57 2021-06-18 19:00 39 ******************** 58 2021-06-18 19:05 40 ********************* 59 2021-06-18 19:10 42 *********************** 60 2021-06-18 19:15 38 ******************* 61 2021-06-18 19:20 37 ****************** 62 2021-06-18 19:25 36 ***************** 63 2021-06-18 19:30 36 ***************** 64 2021-06-18 19:35 37 ****************** 65 2021-06-18 19:40 32 ************* 66 2021-06-18 19:45 32 ************* 67 2021-06-18 19:50 33 ************** 68 2021-06-18 19:55 33 ************** 69 2021-06-18 20:00 32 ************* 70 2021-06-18 20:05 33 ************** 71 2021-06-18 20:10 32 ************* 72 2021-06-18 20:15 31 ************ ... ..( 2 skipped). .. ************ 75 2021-06-18 20:30 31 ************ 76 2021-06-18 20:35 33 ************** 77 2021-06-18 20:40 34 *************** 78 2021-06-18 20:45 35 **************** 79 2021-06-18 20:50 36 ***************** 80 2021-06-18 20:55 36 ***************** 81 2021-06-18 21:00 37 ****************** 82 2021-06-18 21:05 32 ************* 83 2021-06-18 21:10 34 *************** 84 2021-06-18 21:15 36 ***************** 85 2021-06-18 21:20 36 ***************** 86 2021-06-18 21:25 38 ******************* 87 2021-06-18 21:30 38 ******************* 88 2021-06-18 21:35 39 ******************** ... ..( 4 skipped). .. ******************** 93 2021-06-18 22:00 39 ******************** 94 2021-06-18 22:05 40 ********************* 95 2021-06-18 22:10 40 ********************* SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 4 0 Command failed due to ICRC error 0x0002 4 0 R_ERR response for data FIS 0x0003 4 0 R_ERR response for device-to-host data FIS 0x0004 4 0 R_ERR response for host-to-device data FIS 0x0005 4 0 R_ERR response for non-data FIS 0x0006 4 0 R_ERR response for device-to-host non-data FIS 0x0007 4 0 R_ERR response for host-to-device non-data FIS 0x0008 4 0 Device-to-host non-data FIS retries 0x0009 4 4 Transition from drive PhyRdy to drive PhyNRdy 0x000a 4 2 Device-to-host register FISes sent due to a COMRESET 0x000b 4 0 CRC errors within host-to-device FIS 0x000d 4 0 Non-CRC errors within host-to-device FIS 0x000f 4 0 R_ERR response for host-to-device data FIS, CRC 0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC 0x8e00 4 0 Vendor specific 0x8e01 4 0 Vendor specific 0x8e02 4 0 Vendor specific 0x8e03 4 0 Vendor specific 0x8e04 4 0 Vendor specific 0x8e05 4 0 Vendor specific 0x8e06 4 0 Vendor specific 0x8e07 4 0 Vendor specific 0x8e08 4 0 Vendor specific 0x8e09 4 0 Vendor specific 0x8e0a 4 0 Vendor specific 0x8e0b 4 0 Vendor specific 0x8e0c 4 0 Vendor specific 0x8e0d 4 0 Vendor specific 0x8e0e 4 0 Vendor specific 0x8e0f 4 0 Vendor specific 0x8e10 4 0 Vendor specific 0x8e11 4 0 Vendor specific /dev/sdb smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.10.0-kali8-amd64] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: oyunkey Serial Number: -- Firmware Version: R0123A0 User Capacity: 120,034,123,776 bytes [120 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Form Factor: 2.5 inches TRIM Command: Available, deterministic, zeroed Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ACS-2 T13/2015-D revision 3 SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Fri Jun 18 22:13:44 2021 CDT SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 254 (maximum performance) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Unavailable === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 120) seconds. Offline data collection capabilities: (0x11) SMART execute Offline immediate. No Auto Offline data collection support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. No Selective Self-test supported. SMART capabilities: (0x0002) Does not save SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 10) minutes. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 21 9 Power_On_Hours -O--CK 100 100 050 - 8689 12 Power_Cycle_Count -O--CK 100 100 050 - 1703 160 Unknown_Attribute -O--CK 100 100 050 - 30 161 Unknown_Attribute PO--CK 100 100 050 - 70 163 Unknown_Attribute -O--CK 100 100 050 - 63 164 Unknown_Attribute -O--CK 100 100 050 - 143730 165 Unknown_Attribute -O--CK 100 100 050 - 420 166 Unknown_Attribute -O--CK 100 100 050 - 235 167 Unknown_Attribute -O--CK 100 100 050 - 309 168 Unknown_Attribute -O--CK 100 100 050 - 7000 169 Unknown_Attribute -O--CK 100 100 050 - 96 175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0 176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 0 177 Wear_Leveling_Count -O--CK 100 100 050 - 0 178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 21 181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 192 Power-Off_Retract_Count -O--CK 100 100 050 - 216 194 Temperature_Celsius -O---K 100 100 050 - 40 195 Hardware_ECC_Recovered -O--CK 100 100 050 - 575535 196 Reallocated_Event_Count -O--CK 100 100 050 - 30 197 Current_Pending_Sector -O--CK 100 100 050 - 21 198 Offline_Uncorrectable -O--CK 100 100 050 - 30 199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0 232 Available_Reservd_Space -O--CK 100 100 050 - 70 241 Total_LBAs_Written ----CK 100 100 050 - 250717 242 Total_LBAs_Read ----CK 100 100 050 - 221183 245 Unknown_Attribute -O--CK 100 100 050 - 366537 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 1 Comprehensive SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 8 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xde GPL VS 8 Device vendor specific log SMART Extended Comprehensive Error Log Version: 1 (1 sectors) Device Error Count: 1 CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 1 [0] log entry is empty SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 7307 - # 2 Short offline Completed without error 00% 7026 - # 3 Short offline Completed without error 00% 6898 - # 4 Short offline Completed: read failure 90% 3742 9042560 # 5 Short offline Completed: read failure 90% 3742 9042560 # 6 Short offline Completed: read failure 90% 3742 9042560 Selective Self-tests/Logging not supported SCT Commands not supported Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 1703 --- Lifetime Power-On Resets 0x01 0x010 4 8689 --- Power-on Hours 0x01 0x018 6 3546140853 --- Logical Sectors Written 0x01 0x020 6 33602 --- Number of Write Commands 0x01 0x028 6 1610578728 --- Logical Sectors Read 0x01 0x030 6 20693 --- Number of Read Commands 0x07 ===== = = === == Solid State Device Statistics (rev 1) == 0x07 0x008 1 4 --- Percentage Used Endurance Indicator |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 4 0 Command failed due to ICRC error 0x0002 4 0 R_ERR response for data FIS 0x0005 4 0 R_ERR response for non-data FIS 0x000a 4 3 Device-to-host register FISes sent due to a COMRESET