/dev/sda smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.15.0-47-generic] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Samsung based SSDs Device Model: Samsung SSD 860 EVO 250GB Serial Number: -- LU WWN Device Id: 5 002538 ... Firmware Version: RVT03B6Q User Capacity: 250,059,350,016 bytes [250 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Form Factor: 2.5 inches TRIM Command: Available, deterministic, zeroed Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-4 T13/BSR INCITS 529 revision 5 SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Sat Sep 3 22:26:48 2022 MSK SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x53) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 85) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 9 Power_On_Hours -O--CK 099 099 000 - 4074 12 Power_Cycle_Count -O--CK 099 099 000 - 760 177 Wear_Leveling_Count PO--C- 099 099 000 - 8 179 Used_Rsvd_Blk_Cnt_Tot PO--C- 100 100 010 - 0 181 Program_Fail_Cnt_Total -O--CK 100 100 010 - 0 182 Erase_Fail_Count_Total -O--CK 100 100 010 - 0 183 Runtime_Bad_Block PO--C- 100 100 010 - 0 187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0 190 Airflow_Temperature_Cel -O--CK 066 050 000 - 34 195 ECC_Error_Rate -O-RC- 200 200 000 - 0 199 CRC_Error_Count -OSRCK 100 100 000 - 0 235 POR_Recovery_Count -O--C- 099 099 000 - 24 241 Total_LBAs_Written -O--CK 099 099 000 - 3528093327 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 1 Comprehensive SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 8 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x13 GPL R/O 1 SATA NCQ Send and Receive log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa1 SL VS 16 Device vendor specific log 0xa5 SL VS 16 Device vendor specific log 0xce SL VS 16 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 256 (0x0100) Device State: Active (0) Current Temperature: 34 Celsius Power Cycle Min/Max Temperature: 29/40 Celsius Lifetime Min/Max Temperature: 25/50 Celsius Specified Max Operating Temperature: 70 Celsius Under/Over Temperature Limit Count: 0/0 SMART Status: 0xc24f (PASSED) SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 10 minutes Min/Max recommended Temperature: 0/70 Celsius Min/Max Temperature Limit: 0/70 Celsius Temperature History Size (Index): 128 (15) Index Estimated Time Temperature Celsius 16 2022-09-03 01:10 35 **************** 17 2022-09-03 01:20 34 *************** 18 2022-09-03 01:30 36 ***************** 19 2022-09-03 01:40 34 *************** 20 2022-09-03 01:50 35 **************** 21 2022-09-03 02:00 35 **************** 22 2022-09-03 02:10 35 **************** 23 2022-09-03 02:20 33 ************** 24 2022-09-03 02:30 ? - 25 2022-09-03 02:40 30 *********** 26 2022-09-03 02:50 32 ************* ... ..( 20 skipped). .. ************* 47 2022-09-03 06:20 32 ************* 48 2022-09-03 06:30 ? - 49 2022-09-03 06:40 28 ********* 50 2022-09-03 06:50 29 ********** 51 2022-09-03 07:00 29 ********** 52 2022-09-03 07:10 31 ************ 53 2022-09-03 07:20 30 *********** ... ..( 8 skipped). .. *********** 62 2022-09-03 08:50 30 *********** 63 2022-09-03 09:00 31 ************ 64 2022-09-03 09:10 31 ************ 65 2022-09-03 09:20 30 *********** 66 2022-09-03 09:30 31 ************ 67 2022-09-03 09:40 32 ************* 68 2022-09-03 09:50 31 ************ 69 2022-09-03 10:00 ? - 70 2022-09-03 10:10 28 ********* 71 2022-09-03 10:20 29 ********** 72 2022-09-03 10:30 29 ********** 73 2022-09-03 10:40 31 ************ ... ..( 5 skipped). .. ************ 79 2022-09-03 11:40 31 ************ 80 2022-09-03 11:50 30 *********** 81 2022-09-03 12:00 30 *********** 82 2022-09-03 12:10 32 ************* 83 2022-09-03 12:20 31 ************ ... ..( 6 skipped). .. ************ 90 2022-09-03 13:30 31 ************ 91 2022-09-03 13:40 32 ************* 92 2022-09-03 13:50 31 ************ ... ..( 4 skipped). .. ************ 97 2022-09-03 14:40 31 ************ 98 2022-09-03 14:50 32 ************* 99 2022-09-03 15:00 32 ************* 100 2022-09-03 15:10 31 ************ 101 2022-09-03 15:20 32 ************* 102 2022-09-03 15:30 32 ************* 103 2022-09-03 15:40 33 ************** 104 2022-09-03 15:50 31 ************ 105 2022-09-03 16:00 31 ************ 106 2022-09-03 16:10 32 ************* 107 2022-09-03 16:20 ? - 108 2022-09-03 16:30 30 *********** 109 2022-09-03 16:40 30 *********** 110 2022-09-03 16:50 32 ************* 111 2022-09-03 17:00 31 ************ 112 2022-09-03 17:10 31 ************ 113 2022-09-03 17:20 32 ************* ... ..( 9 skipped). .. ************* 123 2022-09-03 19:00 32 ************* 124 2022-09-03 19:10 ? - 125 2022-09-03 19:20 29 ********** 126 2022-09-03 19:30 30 *********** 127 2022-09-03 19:40 31 ************ ... ..( 2 skipped). .. ************ 2 2022-09-03 20:10 31 ************ 3 2022-09-03 20:20 33 ************** 4 2022-09-03 20:30 31 ************ ... ..( 4 skipped). .. ************ 9 2022-09-03 21:20 31 ************ 10 2022-09-03 21:30 32 ************* 11 2022-09-03 21:40 31 ************ 12 2022-09-03 21:50 32 ************* ... ..( 2 skipped). .. ************* 15 2022-09-03 22:20 32 ************* SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 760 --- Lifetime Power-On Resets 0x01 0x010 4 4074 --- Power-on Hours 0x01 0x018 6 3528093327 --- Logical Sectors Written 0x01 0x020 6 45892612 --- Number of Write Commands 0x01 0x028 6 14800911612 --- Logical Sectors Read 0x01 0x030 6 138443084 --- Number of Read Commands 0x01 0x038 6 1309000 --- Date and Time TimeStamp 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors 0x04 0x010 4 354 --- Resets Between Cmd Acceptance and Completion 0x05 ===== = = === == Temperature Statistics (rev 1) == 0x05 0x008 1 34 --- Current Temperature 0x05 0x020 1 50 --- Highest Temperature 0x05 0x028 1 25 --- Lowest Temperature 0x05 0x058 1 70 --- Specified Maximum Operating Temperature 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x008 4 1153 --- Number of Hardware Resets 0x06 0x010 4 0 --- Number of ASR Events 0x06 0x018 4 0 --- Number of Interface CRC Errors 0x07 ===== = = === == Solid State Device Statistics (rev 1) == 0x07 0x008 1 0 N-- Percentage Used Endurance Indicator |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 2 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 2 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC /dev/sdb smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.15.0-47-generic] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Toshiba P300 Device Model: TOSHIBA HDWD120 Serial Number: -- LU WWN Device Id: 5 000039 ... Firmware Version: MX4OACF0 User Capacity: 2,000,398,934,016 bytes [2.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 7200 rpm Form Factor: 3.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Sat Sep 3 22:26:48 2022 MSK SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Disabled Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x84) Offline data collection activity was suspended by an interrupting command from host. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (14726) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 246) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0 2 Throughput_Performance P-S--- 139 139 054 - 70 3 Spin_Up_Time POS--- 140 140 024 - 279 (Average 263) 4 Start_Stop_Count -O--C- 100 100 000 - 768 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 8 Seek_Time_Performance P-S--- 124 124 020 - 33 9 Power_On_Hours -O--C- 100 100 000 - 4074 10 Spin_Retry_Count PO--C- 100 100 060 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 765 192 Power-Off_Retract_Count -O--CK 100 100 000 - 773 193 Load_Cycle_Count -O--C- 100 100 000 - 773 194 Temperature_Celsius -O---- 162 162 000 - 37 (Min/Max 21/56) 196 Reallocated_Event_Count -O--CK 100 100 000 - 0 197 Current_Pending_Sector -O---K 100 100 000 - 8 198 Offline_Uncorrectable ---R-- 100 100 000 - 0 199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x04 GPL R/O 7 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x08 GPL R/O 2 Power Conditions log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x20 GPL R/O 1 Streaming performance log [OBS-8] 0x21 GPL R/O 1 Write stream error log 0x22 GPL R/O 1 Read stream error log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 256 (0x0100) Device State: SMART Off-line Data Collection executing in background (4) Current Temperature: 37 Celsius Power Cycle Min/Max Temperature: 25/37 Celsius Lifetime Min/Max Temperature: 21/56 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -40/70 Celsius Temperature History Size (Index): 128 (92) Index Estimated Time Temperature Celsius 93 2022-09-03 20:19 36 ***************** ... ..( 95 skipped). .. ***************** 61 2022-09-03 21:55 36 ***************** 62 2022-09-03 21:56 37 ****************** 63 2022-09-03 21:57 37 ****************** 64 2022-09-03 21:58 36 ***************** ... ..( 5 skipped). .. ***************** 70 2022-09-03 22:04 36 ***************** 71 2022-09-03 22:05 37 ****************** 72 2022-09-03 22:06 36 ***************** 73 2022-09-03 22:07 36 ***************** 74 2022-09-03 22:08 36 ***************** 75 2022-09-03 22:09 37 ****************** 76 2022-09-03 22:10 37 ****************** 77 2022-09-03 22:11 36 ***************** 78 2022-09-03 22:12 36 ***************** 79 2022-09-03 22:13 37 ****************** 80 2022-09-03 22:14 36 ***************** ... ..( 3 skipped). .. ***************** 84 2022-09-03 22:18 36 ***************** 85 2022-09-03 22:19 37 ****************** ... ..( 2 skipped). .. ****************** 88 2022-09-03 22:22 37 ****************** 89 2022-09-03 22:23 36 ***************** 90 2022-09-03 22:24 37 ****************** 91 2022-09-03 22:25 37 ****************** 92 2022-09-03 22:26 36 ***************** SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 765 --- Lifetime Power-On Resets 0x01 0x010 4 4074 --- Power-on Hours 0x01 0x018 6 31471710306 --- Logical Sectors Written 0x01 0x020 6 154806891 --- Number of Write Commands 0x01 0x028 6 19036419747 --- Logical Sectors Read 0x01 0x030 6 116808455 --- Number of Read Commands 0x03 ===== = = === == Rotating Media Statistics (rev 1) == 0x03 0x008 4 4072 --- Spindle Motor Power-on Hours 0x03 0x010 4 4072 --- Head Flying Hours 0x03 0x018 4 773 --- Head Load Events 0x03 0x020 4 0 --- Number of Reallocated Logical Sectors 0x03 0x028 4 1 --- Read Recovery Attempts 0x03 0x030 4 6 --- Number of Mechanical Start Failures 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors 0x04 0x010 4 3 --- Resets Between Cmd Acceptance and Completion 0x05 ===== = = === == Temperature Statistics (rev 1) == 0x05 0x008 1 37 --- Current Temperature 0x05 0x010 1 35 N-- Average Short Term Temperature 0x05 0x018 1 43 N-- Average Long Term Temperature 0x05 0x020 1 56 --- Highest Temperature 0x05 0x028 1 21 --- Lowest Temperature 0x05 0x030 1 48 N-- Highest Average Short Term Temperature 0x05 0x038 1 25 N-- Lowest Average Short Term Temperature 0x05 0x040 1 46 N-- Highest Average Long Term Temperature 0x05 0x048 1 25 N-- Lowest Average Long Term Temperature 0x05 0x050 4 0 --- Time in Over-Temperature 0x05 0x058 1 60 --- Specified Maximum Operating Temperature 0x05 0x060 4 0 --- Time in Under-Temperature 0x05 0x068 1 0 --- Specified Minimum Operating Temperature 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x008 4 1173 --- Number of Hardware Resets 0x06 0x010 4 406 --- Number of ASR Events 0x06 0x018 4 0 --- Number of Interface CRC Errors |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0009 2 2 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 2 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS