/dev/nvme0n1 smartctl 7.4 2023-08-01 r5530 [x86_64-linux-6.4.11-desktop-1omv2390] (OpenMandriva Lx 7.4-1) Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Number: WD Red SN700 1000GB Serial Number: -- Firmware Version: 111150WD PCI Vendor/Subsystem ID: 0x15b7 IEEE OUI Identifier: 0x001b44 Total NVM Capacity: 1,000,204,886,016 [1.00 TB] Unallocated NVM Capacity: 0 Controller ID: 8215 NVMe Version: 1.3 Number of Namespaces: 1 Namespace 1 Size/Capacity: 1,000,204,886,016 [1.00 TB] Namespace 1 Formatted LBA Size: 512 Namespace 1 IEEE EUI-64: 001b44 ... Local Time is: Tue May 28 23:13:24 2024 CEST Firmware Updates (0x14): 2 Slots, no Reset required Optional Admin Commands (0x0017): Security Format Frmw_DL Self_Test Optional NVM Commands (0x005f): Comp Wr_Unc DS_Mngmt Wr_Zero Sav/Sel_Feat Timestmp Log Page Attributes (0x0e): Cmd_Eff_Lg Ext_Get_Lg Telmtry_Lg Maximum Data Transfer Size: 128 Pages Warning Comp. Temp. Threshold: 84 Celsius Critical Comp. Temp. Threshold: 88 Celsius Namespace 1 Features (0x02): NA_Fields Supported Power States St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat 0 + 6.00W - - 0 0 0 0 0 0 1 + 3.50W - - 1 1 1 1 0 0 2 + 3.00W - - 2 2 2 2 0 0 3 - 0.1000W - - 3 3 3 3 4000 10000 4 - 0.0035W - - 4 4 4 4 4000 40000 Supported LBA Sizes (NSID 0x1) Id Fmt Data Metadt Rel_Perf 0 + 512 0 2 1 - 4096 0 1 === START OF SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED SMART/Health Information (NVMe Log 0x02) Critical Warning: 0x00 Temperature: 36 Celsius Available Spare: 100% Available Spare Threshold: 10% Percentage Used: 0% Data Units Read: 11,130,313 [5.69 TB] Data Units Written: 10,236,625 [5.24 TB] Host Read Commands: 115,922,062 Host Write Commands: 120,179,334 Controller Busy Time: 319 Power Cycles: 811 Power On Hours: 497 Unsafe Shutdowns: 74 Media and Data Integrity Errors: 0 Error Information Log Entries: 19 Warning Comp. Temperature Time: 0 Critical Comp. Temperature Time: 0 Error Information (NVMe Log 0x01, 16 of 256 entries) No Errors Logged Read Self-test Log failed: Invalid Field in Command (0x4002) /dev/sda smartctl 7.4 2023-08-01 r5530 [x86_64-linux-6.4.11-desktop-1omv2390] (OpenMandriva Lx 7.4-1) Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Scorpio EIDE Device Model: WDC WD800UE-00HCT0 Serial Number: -- Firmware Version: 09.07D09 User Capacity: 80,026,361,856 bytes [80.0 GB] Sector Size: 512 bytes logical/physical Device is: In smartctl database ATA Version is: ATA/ATAPI-6 (minor revision not indicated) Local Time is: Tue May 28 23:13:24 2024 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Disabled APM level is: 128 (minimum power consumption without standby) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Unavailable === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED See vendor-specific Attribute list for marginal Attributes. General SMART Values: Offline data collection status: (0x80) Offline data collection activity was never started. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 4800) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. No General Purpose Logging support. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 63) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 199 045 051 Past 766 3 Spin_Up_Time PO---- 188 166 021 - 1575 4 Start_Stop_Count -O--CK 098 098 000 - 2022 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-- 100 253 000 - 0 9 Power_On_Hours -O--CK 096 096 000 - 3238 10 Spin_Retry_Count -O--C- 100 100 000 - 0 11 Calibration_Retry_Count -O--C- 100 100 000 - 0 12 Power_Cycle_Count -O--CK 098 098 000 - 2014 192 Power-Off_Retract_Count -O--CK 198 198 000 - 2005 193 Load_Cycle_Count -O--CK 167 167 000 - 101692 194 Temperature_Celsius -O---K 119 105 000 - 28 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--C- 200 200 000 - 0 198 Offline_Uncorrectable ----C- 100 253 000 - 0 199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 6 200 Multi_Zone_Error_Rate ---R-- 100 253 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory not supported SMART Log Directory Version 0 Address Access R/W Size Description 0x00 SL R/O 1 Log Directory SMART Extended Comprehensive Error Log (GP Log 0x03) not supported SMART Error Log Version: 1 ATA Error Count: 748 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 748 occurred at disk power-on lifetime: 361 hours (15 days + 1 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 07 2a e7 9e e4 Error: UNC 7 sectors at LBA = 0x049ee72a = 77522730 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 03 08 29 e7 9e 04 48 01:48:39.010 READ DMA c8 03 08 29 e7 9e 04 48 01:48:36.490 READ DMA c8 03 08 29 e7 9e 04 48 01:48:33.960 READ DMA c8 03 08 29 e7 9e 04 48 01:48:31.255 READ DMA c8 03 08 29 e7 9e 04 48 01:48:28.370 READ DMA Error 747 occurred at disk power-on lifetime: 361 hours (15 days + 1 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 07 2a e7 9e e4 Error: UNC 7 sectors at LBA = 0x049ee72a = 77522730 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 03 08 29 e7 9e 04 48 01:48:36.490 READ DMA c8 03 08 29 e7 9e 04 48 01:48:33.960 READ DMA c8 03 08 29 e7 9e 04 48 01:48:31.255 READ DMA c8 03 08 29 e7 9e 04 48 01:48:28.370 READ DMA c8 03 08 29 e7 9e 04 48 01:48:25.465 READ DMA Error 746 occurred at disk power-on lifetime: 361 hours (15 days + 1 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 07 2a e7 9e e4 Error: UNC 7 sectors at LBA = 0x049ee72a = 77522730 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 03 08 29 e7 9e 04 48 01:48:33.960 READ DMA c8 03 08 29 e7 9e 04 48 01:48:31.255 READ DMA c8 03 08 29 e7 9e 04 48 01:48:28.370 READ DMA c8 03 08 29 e7 9e 04 48 01:48:25.465 READ DMA c8 03 08 21 e7 9e 04 48 01:48:25.465 READ DMA Error 745 occurred at disk power-on lifetime: 361 hours (15 days + 1 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 07 2a e7 9e e4 Error: UNC 7 sectors at LBA = 0x049ee72a = 77522730 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 03 08 29 e7 9e 04 48 01:48:31.255 READ DMA c8 03 08 29 e7 9e 04 48 01:48:28.370 READ DMA c8 03 08 29 e7 9e 04 48 01:48:25.465 READ DMA c8 03 08 21 e7 9e 04 48 01:48:25.465 READ DMA c8 03 08 19 e7 9e 04 48 01:48:25.465 READ DMA Error 744 occurred at disk power-on lifetime: 361 hours (15 days + 1 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 07 2a e7 9e e4 Error: UNC 7 sectors at LBA = 0x049ee72a = 77522730 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 03 08 29 e7 9e 04 48 01:48:28.370 READ DMA c8 03 08 29 e7 9e 04 48 01:48:25.465 READ DMA c8 03 08 21 e7 9e 04 48 01:48:25.465 READ DMA c8 03 08 19 e7 9e 04 48 01:48:25.465 READ DMA c8 03 08 11 e7 9e 04 48 01:48:25.460 READ DMA SMART Extended Self-test Log (GP Log 0x07) not supported SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 3186 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Commands not supported Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) not supported