/dev/sda smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.8.18-300.fc33.x86_64] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: Golden-Memory 60Gb Serial Number: -- LU WWN Device Id: 0 000000 ... Firmware Version: Q0927A User Capacity: 63,350,767,616 bytes [63.3 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Form Factor: 2.5 inches Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ACS-2 (minor revision not indicated) SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Sat Nov 7 10:50:35 2020 EET SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Disabled Rd look-ahead is: Disabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Unavailable === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x11) SMART execute Offline immediate. No Auto Offline data collection support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. No Selective Self-test supported. SMART capabilities: (0x0002) Does not save SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 1) minutes. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate ------ 100 100 050 - 0 5 Reallocated_Sector_Ct -O---- 100 100 050 - 0 9 Power_On_Hours ------ 100 100 050 - 60 12 Power_Cycle_Count ------ 100 100 050 - 360 160 Unknown_Attribute ------ 100 100 050 - 0 161 Unknown_Attribute ------ 100 100 050 - 63 162 Unknown_Attribute ------ 100 100 050 - 1 163 Unknown_Attribute ------ 100 100 050 - 5 164 Unknown_Attribute ------ 100 100 050 - 22754 165 Unknown_Attribute ------ 100 100 050 - 71 166 Unknown_Attribute ------ 100 100 050 - 19 167 Unknown_Attribute ------ 100 100 050 - 41 168 Unknown_Attribute ------ 100 100 050 - 3000 169 Unknown_Attribute ------ 099 099 050 - 99 192 Power-Off_Retract_Count ------ 100 100 050 - 81 194 Temperature_Celsius ------ 100 100 050 - 34 195 Hardware_ECC_Recovered ------ 100 100 050 - 0 196 Reallocated_Event_Count ------ 100 100 050 - 0 241 Total_LBAs_Written ------ 100 100 050 - 40386 242 Total_LBAs_Read ------ 100 100 050 - 42203 245 Unknown_Attribute ------ 100 100 050 - 84996 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 1 Comprehensive SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 8 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x31 GPL - 4 Reserved 0x80-0x9f GPL,SL R/W 16 Host vendor specific log SMART Extended Comprehensive Error Log Version: 1 (1 sectors) No Errors Logged Warning! SMART Extended Self-test Log Structure error: invalid SMART checksum. SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Reserved (0x8b) Unknown status (0xe) 90% 59 - # 2 Short offline Unknown status (0xa) 00% 58 - # 3 Short offline Completed without error 00% 57 - # 4 Short offline Completed without error 00% 49 - # 5 Short offline Completed without error 00% 49 - # 6 Short offline Completed without error 00% 49 - # 7 Reserved (0x07) Completed without error 00% 48 - # 8 Vendor (0xdf) Completed: unknown failure 80% 1 0 # 9 Short offline Unknown status (0xc) 00% 27283 - #10 Extended offline Completed without error 00% 47 - #11 Short offline Completed without error 00% 47 - #12 Short offline Completed without error 00% 31 - #13 Short offline Completed without error 00% 30 - #14 Short offline Completed without error 00% 30 - #15 Short offline Completed without error 00% 30 - #16 Short offline Completed without error 00% 21 - #17 Short offline Completed without error 00% 16 - #18 Short offline Completed without error 00% 16 - #19 Short offline Completed without error 00% 16 - Selective Self-tests/Logging not supported SCT Commands not supported Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 360 --- Lifetime Power-On Resets 0x01 0x010 4 60 --- Power-on Hours 0x01 0x018 6 2646801459 --- Logical Sectors Written 0x01 0x020 6 21611679 --- Number of Write Commands 0x01 0x028 6 2765852349 --- Logical Sectors Read 0x01 0x030 6 31639836 --- Number of Read Commands 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors 0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion 0x05 ===== = = === == Temperature Statistics (rev 1) == 0x05 0x008 1 34 --- Current Temperature 0x05 0x010 1 -72 --- Average Short Term Temperature 0x05 0x018 1 31 --- Average Long Term Temperature 0x05 0x020 1 39 --- Highest Temperature 0x05 0x028 1 15 --- Lowest Temperature 0x05 0x030 1 -72 --- Highest Average Short Term Temperature 0x05 0x038 1 0 --- Lowest Average Short Term Temperature 0x05 0x040 1 -1 --- Highest Average Long Term Temperature 0x05 0x048 1 0 --- Lowest Average Long Term Temperature 0x05 0x050 4 0 --- Time in Over-Temperature 0x05 0x058 1 100 --- Specified Maximum Operating Temperature 0x05 0x060 4 0 --- Time in Under-Temperature 0x05 0x068 1 0 --- Specified Minimum Operating Temperature 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x008 4 8597 --- Number of Hardware Resets 0x06 0x018 4 0 --- Number of Interface CRC Errors 0x07 ===== = = === == Solid State Device Statistics (rev 1) == 0x07 0x008 1 1 --- Percentage Used Endurance Indicator |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 76 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC /dev/sdb smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.8.18-300.fc33.x86_64] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: SAMSUNG HD161HJ Serial Number: -- LU WWN Device Id: 5 0000f0 ... Firmware Version: JF100-19 User Capacity: 160,041,885,696 bytes [160 GB] Sector Size: 512 bytes logical/physical Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ATA/ATAPI-7, ATA8-ACS T13/1699-D revision 3b Local Time is: Sat Nov 7 10:50:35 2020 EET SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM level is: 254 (maximum performance), recommended: 254 APM level is: 254 (maximum performance) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 2929) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 49) minutes. SCT capabilities: (0x003f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 100 100 051 - 1 3 Spin_Up_Time POS--- 253 253 025 - 4608 4 Start_Stop_Count -O--CK 094 094 000 - 6791 5 Reallocated_Sector_Ct PO--CK 253 253 010 - 0 7 Seek_Error_Rate POSR-- 253 253 051 - 0 8 Seek_Time_Performance P-S--K 253 253 015 - 11334 9 Power_On_Hours -O--CK 100 100 000 - 53071 10 Spin_Retry_Count PO--CK 253 253 051 - 0 11 Calibration_Retry_Count -O--C- 253 100 000 - 0 12 Power_Cycle_Count -O--CK 097 097 000 - 3946 13 Read_Soft_Error_Rate -OSR-- 100 100 000 - 1169629 184 End-to-End_Error PO--CK 253 253 099 - 0 187 Reported_Uncorrect -O--CK 253 253 000 - 65536 188 Command_Timeout -O--CK 253 253 000 - 0 190 Airflow_Temperature_Cel -O---K 133 103 000 - 35 (Min/Max 11/45) 194 Temperature_Celsius -O---K 133 100 000 - 35 (Min/Max 11/46) 195 Hardware_ECC_Recovered -O-RC- 100 100 000 - 1169629 196 Reallocated_Event_Count -O--CK 253 253 000 - 0 197 Current_Pending_Sector -O--C- 253 253 000 - 0 198 Offline_Uncorrectable ----CK 253 253 000 - 0 199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 2 200 Multi_Zone_Error_Rate -O-R-- 100 100 000 - 0 201 Soft_Read_Error_Rate -O-R-- 253 100 000 - 0 202 Data_Address_Mark_Errs -O--CK 100 100 000 - 1 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 2 Comprehensive SMART error log 0x03 GPL R/O 2 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (2 sectors) Device Error Count: 17 (device log contains only the most recent 8 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 17 [0] log entry is empty Error 16 [7] occurred at disk power-on lifetime: 9326 hours (388 days + 14 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 50 -- 00 ef 00 e0 9d 1d 00 00 09 35 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 59 00 50 09 ef 35 00 00 e0 9d 1d 00 00 00:00:00.058 [RESERVED] 59 00 50 09 ef 35 00 00 e0 9d 1d 00 00 00:00:00.058 [RESERVED] 59 00 48 04 ff 35 00 00 e0 fd 72 00 00 00:00:00.058 [RESERVED] 59 00 50 00 4f 35 00 00 e0 12 af 00 00 00:00:00.058 [RESERVED] 00 00 16 ae 92 00 05 00 32 00 47 00 a0 00:00:01.832 NOP [Reserved subcommand] [OBS-ACS-2] Error 15 [6] occurred at disk power-on lifetime: 8075 hours (336 days + 11 hours) When the command that caused the error occurred, the device was in a reserved state. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 38 -- 00 df 00 e0 d9 58 00 00 00 35 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 57 00 38 00 a7 35 00 00 e0 d9 58 00 00 00:00:00.297 WRITE LOG DMA EXT 57 00 38 00 a7 35 00 00 e0 d9 58 00 00 00:00:00.297 WRITE LOG DMA EXT 57 00 30 00 77 35 00 00 e0 d9 58 00 00 00:00:00.297 WRITE LOG DMA EXT 57 00 30 00 77 35 00 00 e0 d9 58 00 00 00:00:00.297 WRITE LOG DMA EXT 00 00 16 a3 92 00 04 00 da 00 d7 00 a0 00:00:01.463 NOP [Reserved subcommand] [OBS-ACS-2] Error 14 [5] occurred at disk power-on lifetime: 8519 hours (354 days + 23 hours) When the command that caused the error occurred, the device was in a reserved state. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 00 2f 00 e0 da a4 00 00 03 39 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- f2 00 40 03 ef 39 00 00 e0 da a3 00 00 00:00:00.017 SECURITY UNLOCK f2 00 40 03 af 39 00 00 e0 da a3 00 00 00:00:00.017 SECURITY UNLOCK f2 00 40 03 6f 39 00 00 e0 da a3 00 00 00:00:00.017 SECURITY UNLOCK f2 00 40 03 2f 39 00 00 e0 da a3 00 00 00:00:00.017 SECURITY UNLOCK 00 00 16 b4 d8 00 00 00 c5 01 25 00 89 00:00:07.236 NOP [Reserved subcommand] [OBS-ACS-2] Error 13 [4] occurred at disk power-on lifetime: 8259 hours (344 days + 3 hours) When the command that caused the error occurred, the device was in a vendor specific state. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 28 -- 00 a7 05 40 75 74 00 00 0a 61 80 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 9e 05 28 0a 27 61 00 00 40 75 74 00 80 24d+20:31:26.289 [RESERVED] 9e 05 28 0a a7 61 00 00 40 75 73 00 80 24d+20:31:26.289 [RESERVED] 9e 04 28 0a a7 60 00 00 40 75 78 00 80 24d+20:31:26.289 [RESERVED] 9e 04 20 0a 27 61 00 00 40 75 73 00 80 24d+20:31:26.289 [RESERVED] 00 11 89 11 91 00 00 11 01 c9 b1 02 11 24d+20:31:23.648 NOP [Reserved subcommand] [OBS-ACS-2] Error 12 [3] occurred at disk power-on lifetime: 25408 hours (1058 days + 16 hours) When the command that caused the error occurred, the device was in a reserved state. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 00 -- 00 00 00 00 00 00 00 00 00 00 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- Error 11 [2] log entry is empty Error 10 [1] log entry is empty SMART Extended Self-test Log (GP Log 0x07) not supported SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 53030 - # 2 Short offline Completed without error 00% 53018 - # 3 Short offline Completed without error 00% 53010 - # 4 Short offline Completed without error 00% 52832 - # 5 Short offline Completed without error 00% 52823 - # 6 Short offline Completed without error 00% 52820 - # 7 Short offline Completed without error 00% 52817 - # 8 Short offline Completed without error 00% 52811 - # 9 Short offline Completed without error 00% 52781 - #10 Extended offline Completed without error 00% 52778 - #11 Short offline Completed without error 00% 52765 - #12 Short offline Completed without error 00% 52037 - #13 Short offline Completed without error 00% 52031 - #14 Short offline Completed without error 00% 52010 - #15 Short offline Completed without error 00% 51985 - #16 Short offline Completed without error 00% 51429 - #17 Short offline Completed without error 00% 51343 - #18 Short offline Completed without error 00% 51337 - #19 Short offline Completed without error 00% 51332 - #20 Short offline Completed without error 00% 51319 - #21 Short offline Interrupted (host reset) 70% 51312 - SMART Selective self-test log data structure revision number 0 Note: revision number not 1 implies that no selective self-test has ever been run SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 2 SCT Version (vendor specific): 256 (0x0100) Device State: Active (0) Current Temperature: 35 Celsius Power Cycle Min/Max Temperature: 32/36 Celsius Lifetime Min/Max Temperature: 11/47 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: -4/72 Celsius Min/Max Temperature Limit: -9/77 Celsius Temperature History Size (Index): 128 (105) Index Estimated Time Temperature Celsius 106 2020-11-07 08:43 35 **************** ... ..( 50 skipped). .. **************** 29 2020-11-07 09:34 35 **************** 30 2020-11-07 09:35 33 ************** 31 2020-11-07 09:36 35 **************** ... ..( 14 skipped). .. **************** 46 2020-11-07 09:51 35 **************** 47 2020-11-07 09:52 36 ***************** 48 2020-11-07 09:53 35 **************** ... ..( 2 skipped). .. **************** 51 2020-11-07 09:56 35 **************** 52 2020-11-07 09:57 36 ***************** 53 2020-11-07 09:58 35 **************** ... ..( 51 skipped). .. **************** 105 2020-11-07 10:50 35 **************** SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 6 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 64 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC 0x8001 2 0 Vendor specific /dev/sdc smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.8.18-300.fc33.x86_64] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Caviar Green (AF) Device Model: WDC WD10EARS-00MVWB0 Serial Number: -- LU WWN Device Id: 5 0014ee ... Firmware Version: 51.0AB51 User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS (minor revision not indicated) SATA Version is: SATA 2.6, 3.0 Gb/s Local Time is: Sat Nov 7 10:50:35 2020 EET SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (25260) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 246) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x3035) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 3 Spin_Up_Time POS--K 253 161 021 - 1016 4 Start_Stop_Count -O--CK 088 088 000 - 12764 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 9 Power_On_Hours -O--CK 021 021 000 - 57888 10 Spin_Retry_Count -O--CK 100 100 000 - 0 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 12 Power_Cycle_Count -O--CK 097 097 000 - 3034 192 Power-Off_Retract_Count -O--CK 200 200 000 - 415 193 Load_Cycle_Count -O--CK 001 001 000 - 661965 194 Temperature_Celsius -O---K 116 104 000 - 34 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 0 198 Offline_Uncorrectable ----CK 200 200 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb7 GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 93 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 57847 - # 2 Short offline Completed without error 00% 57835 - # 3 Short offline Completed without error 00% 57827 - # 4 Short offline Completed without error 00% 57649 - # 5 Short offline Completed without error 00% 57639 - # 6 Short offline Completed without error 00% 57637 - # 7 Short offline Completed without error 00% 57633 - # 8 Short offline Completed without error 00% 57627 - # 9 Short offline Completed without error 00% 57597 - #10 Short offline Completed without error 00% 57582 - #11 Short offline Completed without error 00% 56856 - #12 Short offline Completed without error 00% 56850 - #13 Short offline Completed without error 00% 56828 - #14 Short offline Completed without error 00% 56804 - #15 Short offline Completed without error 00% 56249 - #16 Short offline Completed without error 00% 56163 - #17 Short offline Completed without error 00% 56158 - #18 Short offline Completed without error 00% 56152 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 258 (0x0102) Device State: Active (0) Current Temperature: 34 Celsius Power Cycle Min/Max Temperature: 33/34 Celsius Lifetime Min/Max Temperature: 23/46 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 478 (38) Index Estimated Time Temperature Celsius 39 2020-11-07 02:53 34 *************** ... ..(108 skipped). .. *************** 148 2020-11-07 04:42 34 *************** 149 2020-11-07 04:43 33 ************** ... ..( 4 skipped). .. ************** 154 2020-11-07 04:48 33 ************** 155 2020-11-07 04:49 34 *************** 156 2020-11-07 04:50 33 ************** 157 2020-11-07 04:51 33 ************** 158 2020-11-07 04:52 34 *************** 159 2020-11-07 04:53 33 ************** ... ..( 4 skipped). .. ************** 164 2020-11-07 04:58 33 ************** 165 2020-11-07 04:59 34 *************** ... ..( 2 skipped). .. *************** 168 2020-11-07 05:02 34 *************** 169 2020-11-07 05:03 33 ************** ... ..( 4 skipped). .. ************** 174 2020-11-07 05:08 33 ************** 175 2020-11-07 05:09 34 *************** 176 2020-11-07 05:10 33 ************** ... ..( 7 skipped). .. ************** 184 2020-11-07 05:18 33 ************** 185 2020-11-07 05:19 34 *************** 186 2020-11-07 05:20 34 *************** 187 2020-11-07 05:21 33 ************** ... ..( 16 skipped). .. ************** 204 2020-11-07 05:38 33 ************** 205 2020-11-07 05:39 34 *************** 206 2020-11-07 05:40 33 ************** ... ..( 17 skipped). .. ************** 224 2020-11-07 05:58 33 ************** 225 2020-11-07 05:59 34 *************** 226 2020-11-07 06:00 34 *************** 227 2020-11-07 06:01 33 ************** ... ..( 4 skipped). .. ************** 232 2020-11-07 06:06 33 ************** 233 2020-11-07 06:07 34 *************** 234 2020-11-07 06:08 34 *************** 235 2020-11-07 06:09 33 ************** ... ..( 6 skipped). .. ************** 242 2020-11-07 06:16 33 ************** 243 2020-11-07 06:17 34 *************** 244 2020-11-07 06:18 33 ************** ... ..( 26 skipped). .. ************** 271 2020-11-07 06:45 33 ************** 272 2020-11-07 06:46 34 *************** ... ..( 2 skipped). .. *************** 275 2020-11-07 06:49 34 *************** 276 2020-11-07 06:50 33 ************** ... ..( 2 skipped). .. ************** 279 2020-11-07 06:53 33 ************** 280 2020-11-07 06:54 34 *************** 281 2020-11-07 06:55 33 ************** 282 2020-11-07 06:56 33 ************** 283 2020-11-07 06:57 34 *************** ... ..( 23 skipped). .. *************** 307 2020-11-07 07:21 34 *************** 308 2020-11-07 07:22 33 ************** 309 2020-11-07 07:23 34 *************** ... ..(102 skipped). .. *************** 412 2020-11-07 09:06 34 *************** 413 2020-11-07 09:07 33 ************** 414 2020-11-07 09:08 33 ************** 415 2020-11-07 09:09 33 ************** 416 2020-11-07 09:10 34 *************** ... ..( 51 skipped). .. *************** 468 2020-11-07 10:02 34 *************** 469 2020-11-07 10:03 33 ************** 470 2020-11-07 10:04 34 *************** ... ..( 45 skipped). .. *************** 38 2020-11-07 10:50 34 *************** SCT Error Recovery Control command not supported Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x000a 2 29 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x8000 4 49366 Vendor specific /dev/sdd smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.8.18-300.fc33.x86_64] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Scorpio Blue Serial ATA Device Model: WDC WD2500BEVS-22UST0 Serial Number: -- LU WWN Device Id: 5 0014ee ... Firmware Version: 01.01A01 User Capacity: 250,059,350,016 bytes [250 GB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS (minor revision not indicated) Local Time is: Sat Nov 7 10:50:35 2020 EET SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM level is: 254 (maximum performance), recommended: 128 APM level is: 128 (minimum power consumption without standby) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x05) Offline data collection activity was aborted by an interrupting command from host. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 9180) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 110) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x303f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 200 200 051 - 4 3 Spin_Up_Time PO---- 186 184 021 - 1691 4 Start_Stop_Count -O--CK 093 093 000 - 7070 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-- 100 253 051 - 0 9 Power_On_Hours -O--CK 042 042 000 - 42868 10 Spin_Retry_Count PO--C- 100 100 051 - 0 11 Calibration_Retry_Count -O--C- 100 100 051 - 0 12 Power_Cycle_Count -O--CK 096 096 000 - 4211 192 Power-Off_Retract_Count -O--CK 200 200 000 - 736 193 Load_Cycle_Count -O--CK 093 093 000 - 321040 194 Temperature_Celsius -O---K 115 091 000 - 32 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--C- 200 200 000 - 0 198 Offline_Uncorrectable ----C- 200 200 000 - 0 199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 17 200 Multi_Zone_Error_Rate P--R-- 200 200 051 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb7 GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 12 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) Device Error Count: 4 CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 4 [3] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 00 01 08 00 51 00 00 e0 01 00 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 00 02 25 1e bc 00 00 00 00 00 01 00 01 00:00:00.000 NOP [Reserved subcommand] [OBS-ACS-2] 00 08 00 00 d8 1e 02 01 bc 25 00 01 00 00:00:57.352 NOP [Abort queued commands] 01 ff 25 1e bb 00 08 00 d0 00 01 00 01 05:13:11.426 [RESERVED] 00 08 00 00 c0 1e ff 01 bb 25 00 01 00 00:00:51.208 NOP [Abort queued commands] Error 3 [2] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 00 01 a0 00 51 00 00 e0 01 00 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 00 c8 25 1e ab 00 00 00 00 00 01 00 01 00:00:00.000 NOP [Reserved subcommand] [OBS-ACS-2] 00 00 00 00 80 1e c7 01 ab 25 00 01 00 00:00:32.928 NOP [Abort queued commands] 01 c5 35 1e ab 00 00 00 80 00 01 00 00 05:13:07.270 [RESERVED] 00 48 00 00 0a 1e c4 0d ab 35 00 01 00 00:00:43.176 NOP [Abort queued commands] Error 2 [1] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 00 01 08 00 51 00 00 e0 01 00 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 00 b9 25 1e 94 00 00 00 00 00 01 00 01 00:00:00.000 NOP [Reserved subcommand] [OBS-ACS-2] 00 20 00 00 60 1e af 01 94 25 00 01 00 00:00:00.008 NOP [Abort queued commands] 00 af 35 1e 94 00 10 00 30 00 01 00 00 05:13:01.359 NOP [Reserved subcommand] [OBS-ACS-2] 00 85 00 00 f0 1e ae 00 94 35 00 01 00 00:00:02.056 NOP [Abort queued commands] Error 1 [0] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 00 01 80 00 51 00 00 e0 01 00 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 00 d1 25 1e 84 00 00 00 00 00 01 00 01 00:00:00.000 NOP [Reserved subcommand] [OBS-ACS-2] 00 28 00 00 00 1e d1 00 84 35 00 01 00 00:00:00.128 NOP [Abort queued commands] 00 d0 35 1e 84 00 08 00 60 00 01 00 0d 05:12:57.297 NOP [Reserved subcommand] [OBS-ACS-2] 00 08 00 00 f0 1e d9 00 83 35 00 01 00 00:00:41.544 NOP [Abort queued commands] SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 42849 - # 2 Short offline Completed without error 00% 42822 - # 3 Short offline Completed without error 00% 42330 - # 4 Short offline Completed without error 00% 42306 - # 5 Short offline Completed without error 00% 42303 - # 6 Short offline Completed without error 00% 42300 - # 7 Short offline Completed without error 00% 42289 - # 8 Short offline Completed without error 00% 42228 - # 9 Extended offline Completed without error 00% 42220 - #10 Short offline Completed without error 00% 42203 - #11 Short offline Completed without error 00% 41313 - #12 Short offline Completed without error 00% 41272 - #13 Short offline Completed without error 00% 41248 - #14 Short offline Completed without error 00% 40480 - #15 Short offline Completed without error 00% 40352 - #16 Short offline Completed without error 00% 40347 - #17 Short offline Completed without error 00% 40315 - #18 Short offline Completed without error 00% 40286 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 2 SCT Version (vendor specific): 258 (0x0102) Device State: Active (0) Current Temperature: 32 Celsius Power Cycle Min/Max Temperature: 30/33 Celsius Lifetime Min/Max Temperature: 30/57 Celsius Under/Over Temperature Limit Count: 0/0 Vendor specific: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 5/60 Celsius Min/Max Temperature Limit: 1/85 Celsius Temperature History Size (Index): 128 (108) Index Estimated Time Temperature Celsius 109 2020-11-07 08:43 30 *********** ... ..(105 skipped). .. *********** 87 2020-11-07 10:29 30 *********** 88 2020-11-07 10:30 ? - 89 2020-11-07 10:31 31 ************ ... ..( 6 skipped). .. ************ 96 2020-11-07 10:38 31 ************ 97 2020-11-07 10:39 ? - 98 2020-11-07 10:40 31 ************ 99 2020-11-07 10:41 31 ************ 100 2020-11-07 10:42 31 ************ 101 2020-11-07 10:43 32 ************* ... ..( 5 skipped). .. ************* 107 2020-11-07 10:49 32 ************* 108 2020-11-07 10:50 30 *********** SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x000a 2 3 Device-to-host register FISes sent due to a COMRESET 0x8000 4 49287 Vendor specific