/dev/sda smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.19.0-38-generic] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: LDLC Serial Number: -- LU WWN Device Id: 5 000000 ... Firmware Version: P0303A User Capacity: 240,057,409,536 bytes [240 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device TRIM Command: Available, deterministic, zeroed Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ACS-2 (minor revision not indicated) SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Tue Apr 11 11:39:28 2023 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Unknown (0xe001) === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x02) Offline data collection activity was completed without error. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 171) seconds. Offline data collection capabilities: (0x71) SMART execute Offline immediate. No Auto Offline data collection support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0002) Does not save SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 2) minutes. Conveyance self-test routine recommended polling time: ( 1) minutes. SCT capabilities: (0x0035) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate ------ 100 100 000 - 0 5 Reallocated_Sector_Ct ------ 100 100 000 - 30 9 Power_On_Hours ------ 100 100 000 - 10195 12 Power_Cycle_Count ------ 100 100 000 - 2533 171 Unknown_Attribute ------ 100 100 000 - 0 172 Unknown_Attribute ------ 100 100 000 - 0 174 Unknown_Attribute ------ 100 100 000 - 85 177 Wear_Leveling_Count ------ 100 100 050 - 21 181 Program_Fail_Cnt_Total ------ 100 100 000 - 0 182 Erase_Fail_Count_Total ------ 100 100 000 - 0 187 Reported_Uncorrect ------ 100 100 000 - 1372 194 Temperature_Celsius ------ 040 000 000 - 40 195 Hardware_ECC_Recovered ------ 100 100 000 - 0 196 Reallocated_Event_Count ------ 100 100 016 - 0 231 Unknown_SSD_Attribute ------ 100 100 000 - 268439625 234 Unknown_Attribute ------ 100 100 000 - 20692 235 Unknown_Attribute ------ 100 100 000 - 12884 241 Total_LBAs_Written PO---- 100 100 000 - 13194138 242 Total_LBAs_Read PO---- 100 100 000 - 21188668 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 1 Comprehensive SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 8 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x24 GPL R/O 88 Current Device Internal Status Data log 0x25 GPL R/O 64 Saved Device Internal Status Data log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log SMART Extended Comprehensive Error Log Version: 1 (1 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Offline Completed without error 00% 10195 - # 2 Offline Completed without error 00% 10195 - # 3 Offline Completed without error 00% 10195 - # 4 Short offline Completed without error 00% 9909 - # 5 Offline Completed without error 00% 9909 - # 6 Offline Completed without error 00% 9728 - # 7 Short offline Completed without error 00% 0 - # 8 Short offline Completed without error 00% 179 - # 9 Short offline Completed without error 00% 9907 - #10 Short offline Completed without error 00% 9906 - #11 Short offline Completed without error 00% 9906 - #12 Short offline Completed without error 00% 9906 - #13 Short offline Self-test routine in progress 90% 9905 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing 7 0 65535 Read_scanning was completed without error Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 0 (0x0000) Device State: Active (0) Current Temperature: 0 Celsius Power Cycle Min/Max Temperature: -1/ 0 Celsius Lifetime Min/Max Temperature: 0/ 0 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/100 Celsius Min/Max Temperature Limit: 0/100 Celsius Temperature History Size (Index): 128 (0) Index Estimated Time Temperature Celsius 1 2023-04-11 09:32 0 - ... ..(126 skipped). .. - 0 2023-04-11 11:39 0 - SCT Error Recovery Control command not supported Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 2) == 0x01 0x008 4 2533 --- Lifetime Power-On Resets 0x01 0x010 4 10195 --- Power-on Hours 0x01 0x018 6 1251790960 --- Logical Sectors Written 0x01 0x020 6 312601320 --- Number of Write Commands 0x01 0x028 6 444719540 --- Logical Sectors Read 0x01 0x030 6 661682685 --- Number of Read Commands 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 1372 --- Number of Reported Uncorrectable Errors 0x04 0x010 4 98 --- Resets Between Cmd Acceptance and Completion 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x008 4 9871 --- Number of Hardware Resets 0x06 0x018 4 42 --- Number of Interface CRC Errors 0x07 ===== = = === == Solid State Device Statistics (rev 1) == 0x07 0x008 1 4 --- Percentage Used Endurance Indicator |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 3 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC /dev/sdb smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.19.0-38-generic] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Samsung based SSDs Device Model: Samsung SSD 870 QVO 1TB Serial Number: -- LU WWN Device Id: 5 002538 ... Firmware Version: SVQ02B6Q User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Form Factor: 2.5 inches TRIM Command: Available, deterministic, zeroed Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-4 T13/BSR INCITS 529 revision 5 SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Tue Apr 11 11:39:28 2023 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x53) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 85) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 9 Power_On_Hours -O--CK 098 098 000 - 5358 12 Power_Cycle_Count -O--CK 099 099 000 - 533 177 Wear_Leveling_Count PO--C- 099 099 000 - 2 179 Used_Rsvd_Blk_Cnt_Tot PO--C- 100 100 010 - 0 181 Program_Fail_Cnt_Total -O--CK 100 100 010 - 0 182 Erase_Fail_Count_Total -O--CK 100 100 010 - 0 183 Runtime_Bad_Block PO--C- 100 100 010 - 0 187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0 190 Airflow_Temperature_Cel -O--CK 068 050 000 - 32 195 ECC_Error_Rate -O-RC- 200 200 000 - 0 199 CRC_Error_Count -OSRCK 100 100 000 - 0 235 POR_Recovery_Count -O--C- 099 099 000 - 17 241 Total_LBAs_Written -O--CK 099 099 000 - 1997008410 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 1 Comprehensive SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 8 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x13 GPL R/O 1 SATA NCQ Send and Receive log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa1 SL VS 16 Device vendor specific log 0xa5 SL VS 16 Device vendor specific log 0xce SL VS 16 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 7 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing 256 0 65535 Read_scanning was never started Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 256 (0x0100) Device State: Active (0) Current Temperature: 32 Celsius Power Cycle Min/Max Temperature: 21/28 Celsius Lifetime Min/Max Temperature: 24/49 Celsius Specified Max Operating Temperature: 70 Celsius Under/Over Temperature Limit Count: 0/0 SMART Status: 0xc24f (PASSED) SCT Temperature History Version: 2 Temperature Sampling Period: 10 minutes Temperature Logging Interval: 10 minutes Min/Max recommended Temperature: 0/70 Celsius Min/Max Temperature Limit: 0/70 Celsius Temperature History Size (Index): 128 (80) Index Estimated Time Temperature Celsius 81 2023-04-10 14:20 28 ********* ... ..( 3 skipped). .. ********* 85 2023-04-10 15:00 28 ********* 86 2023-04-10 15:10 29 ********** 87 2023-04-10 15:20 28 ********* ... ..( 2 skipped). .. ********* 90 2023-04-10 15:50 28 ********* 91 2023-04-10 16:00 29 ********** ... ..( 10 skipped). .. ********** 102 2023-04-10 17:50 29 ********** 103 2023-04-10 18:00 28 ********* 104 2023-04-10 18:10 29 ********** 105 2023-04-10 18:20 ? - 106 2023-04-10 18:30 ? - 107 2023-04-10 18:40 24 ***** 108 2023-04-10 18:50 26 ******* 109 2023-04-10 19:00 27 ******** 110 2023-04-10 19:10 28 ********* 111 2023-04-10 19:20 28 ********* 112 2023-04-10 19:30 28 ********* 113 2023-04-10 19:40 29 ********** 114 2023-04-10 19:50 28 ********* 115 2023-04-10 20:00 29 ********** ... ..( 58 skipped). .. ********** 46 2023-04-11 05:50 29 ********** 47 2023-04-11 06:00 28 ********* ... ..( 9 skipped). .. ********* 57 2023-04-11 07:40 28 ********* 58 2023-04-11 07:50 29 ********** ... ..( 11 skipped). .. ********** 70 2023-04-11 09:50 29 ********** 71 2023-04-11 10:00 ? - 72 2023-04-11 10:10 25 ****** 73 2023-04-11 10:20 27 ******** 74 2023-04-11 10:30 28 ********* 75 2023-04-11 10:40 28 ********* 76 2023-04-11 10:50 28 ********* 77 2023-04-11 11:00 ? - 78 2023-04-11 11:10 ? - 79 2023-04-11 11:20 26 ******* 80 2023-04-11 11:30 28 ********* SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 533 --- Lifetime Power-On Resets 0x01 0x010 4 5358 --- Power-on Hours 0x01 0x018 6 1997008410 --- Logical Sectors Written 0x01 0x020 6 5789976 --- Number of Write Commands 0x01 0x028 6 1725716249 --- Logical Sectors Read 0x01 0x030 6 10662564 --- Number of Read Commands 0x01 0x038 6 2466000 --- Date and Time TimeStamp 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors 0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion 0x05 ===== = = === == Temperature Statistics (rev 1) == 0x05 0x008 1 32 --- Current Temperature 0x05 0x020 1 49 --- Highest Temperature 0x05 0x028 1 24 --- Lowest Temperature 0x05 0x058 1 70 --- Specified Maximum Operating Temperature 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x008 4 1276 --- Number of Hardware Resets 0x06 0x010 4 0 --- Number of ASR Events 0x06 0x018 4 0 --- Number of Interface CRC Errors 0x07 ===== = = === == Solid State Device Statistics (rev 1) == 0x07 0x008 1 0 N-- Percentage Used Endurance Indicator |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 2 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 2 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC /dev/sdc smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.19.0-38-generic] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Caviar Blue (SATA) Device Model: WDC WD6400AAKS-22A7B2 Serial Number: -- LU WWN Device Id: 5 0014ee ... Firmware Version: 01.03B01 User Capacity: 640,135,028,736 bytes [640 GB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS (minor revision not indicated) SATA Version is: SATA 2.5, 3.0 Gb/s Local Time is: Tue Apr 11 11:39:28 2023 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Disabled APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x84) Offline data collection activity was suspended by an interrupting command from host. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (11160) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 131) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x303f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 3 Spin_Up_Time POS--K 159 156 021 - 5008 4 Start_Stop_Count -O--CK 097 097 000 - 3977 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 9 Power_On_Hours -O--CK 048 048 000 - 38364 10 Spin_Retry_Count -O--CK 100 100 000 - 0 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 12 Power_Cycle_Count -O--CK 097 097 000 - 3943 192 Power-Off_Retract_Count -O--CK 200 200 000 - 386 193 Load_Cycle_Count -O--CK 199 199 000 - 3977 194 Temperature_Celsius -O---K 117 090 000 - 30 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 0 198 Offline_Uncorrectable ----CK 200 200 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb7 GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 24 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) Device Error Count: 3 CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 3 [2] occurred at disk power-on lifetime: 26082 hours (1086 days + 18 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 3e 21 00 e6 60 40 00 Error: UNC at LBA = 0x3e2100e660 = 266841679456 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 08 00 40 00 00 3e e6 21 78 40 08 04:59:22.786 READ FPDMA QUEUED 60 00 08 00 38 00 00 3e e6 21 70 40 08 04:59:20.576 READ FPDMA QUEUED 60 00 08 00 30 00 00 3e e6 21 68 40 08 04:59:20.559 READ FPDMA QUEUED 60 00 08 00 28 00 00 3e e6 21 60 40 08 04:59:20.559 READ FPDMA QUEUED 60 00 08 00 20 00 00 3e e6 21 58 40 08 04:59:20.559 READ FPDMA QUEUED Error 2 [1] occurred at disk power-on lifetime: 26082 hours (1086 days + 18 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 fe 00 3e 21 00 e6 60 40 00 Error: UNC at LBA = 0x3e2100e660 = 266841679456 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 01 00 00 e0 00 00 3e e6 21 00 40 08 04:59:17.794 READ FPDMA QUEUED 60 01 00 00 d8 00 00 3e e6 20 00 40 08 04:59:17.791 READ FPDMA QUEUED 60 01 00 00 d0 00 00 3e e6 1f 00 40 08 04:59:17.789 READ FPDMA QUEUED 60 01 00 00 c8 00 00 3e e6 1e 00 40 08 04:59:17.786 READ FPDMA QUEUED 60 01 00 00 c0 00 00 3e e6 1d 00 40 08 04:59:17.783 READ FPDMA QUEUED Error 1 [0] occurred at disk power-on lifetime: 9768 hours (407 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 fe 00 4a 6a 00 4e 9a 40 00 Error: UNC at LBA = 0x4a6a004e9a = 319605984922 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 01 00 00 00 00 00 4a 4e 6a 58 40 08 1d+09:16:32.768 READ FPDMA QUEUED 60 01 00 00 08 00 00 4a 4e 69 58 40 08 1d+09:16:32.766 READ FPDMA QUEUED 60 01 00 00 00 00 00 4a 4e 68 58 40 08 1d+09:16:32.763 READ FPDMA QUEUED 60 01 00 00 08 00 00 4a 4e 67 58 40 08 1d+09:16:32.761 READ FPDMA QUEUED 60 01 00 00 00 00 00 4a 4e 66 58 40 08 1d+09:16:32.759 READ FPDMA QUEUED SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 30402 - # 2 Short offline Completed: read failure 90% 21542 1055269216 # 3 Short offline Completed: read failure 90% 21541 1055269216 # 4 Short offline Completed without error 00% 9819 - # 5 Short offline Completed without error 00% 9819 - # 6 Short offline Completed without error 00% 8773 - # 7 Short offline Completed without error 00% 2996 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 2 SCT Version (vendor specific): 258 (0x0102) Device State: SMART Off-line Data Collection executing in background (4) Current Temperature: 30 Celsius Power Cycle Min/Max Temperature: 22/30 Celsius Lifetime Min/Max Temperature: 19/57 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 128 (105) Index Estimated Time Temperature Celsius 106 2023-04-11 09:32 31 ************ ... ..( 41 skipped). .. ************ 20 2023-04-11 10:14 31 ************ 21 2023-04-11 10:15 ? - 22 2023-04-11 10:16 21 ** 23 2023-04-11 10:17 21 ** 24 2023-04-11 10:18 22 *** 25 2023-04-11 10:19 22 *** 26 2023-04-11 10:20 24 ***** 27 2023-04-11 10:21 25 ****** 28 2023-04-11 10:22 25 ****** 29 2023-04-11 10:23 25 ****** 30 2023-04-11 10:24 26 ******* 31 2023-04-11 10:25 26 ******* 32 2023-04-11 10:26 26 ******* 33 2023-04-11 10:27 27 ******** 34 2023-04-11 10:28 27 ******** 35 2023-04-11 10:29 27 ******** 36 2023-04-11 10:30 28 ********* 37 2023-04-11 10:31 28 ********* 38 2023-04-11 10:32 28 ********* 39 2023-04-11 10:33 29 ********** ... ..( 6 skipped). .. ********** 46 2023-04-11 10:40 29 ********** 47 2023-04-11 10:41 30 *********** ... ..( 30 skipped). .. *********** 78 2023-04-11 11:12 30 *********** 79 2023-04-11 11:13 ? - 80 2023-04-11 11:14 21 ** 81 2023-04-11 11:15 21 ** 82 2023-04-11 11:16 22 *** 83 2023-04-11 11:17 22 *** 84 2023-04-11 11:18 ? - 85 2023-04-11 11:19 22 *** 86 2023-04-11 11:20 22 *** 87 2023-04-11 11:21 23 **** 88 2023-04-11 11:22 24 ***** 89 2023-04-11 11:23 25 ****** 90 2023-04-11 11:24 25 ****** 91 2023-04-11 11:25 26 ******* 92 2023-04-11 11:26 26 ******* 93 2023-04-11 11:27 26 ******* 94 2023-04-11 11:28 27 ******** 95 2023-04-11 11:29 27 ******** 96 2023-04-11 11:30 28 ********* 97 2023-04-11 11:31 28 ********* 98 2023-04-11 11:32 29 ********** ... ..( 3 skipped). .. ********** 102 2023-04-11 11:36 29 ********** 103 2023-04-11 11:37 30 *********** 104 2023-04-11 11:38 30 *********** 105 2023-04-11 11:39 30 *********** SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x000a 2 1 Device-to-host register FISes sent due to a COMRESET 0x8000 4 1233 Vendor specific