/dev/sda smartctl 7.1 2019-12-30 r5022 [x86_64-linux-4.15.0-desktop-122.124.1rosa-x86_64] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Seagate Barracuda 7200.10 Device Model: ST3250310AS Serial Number: -- Firmware Version: 3.AHC User Capacity: 250,059,350,016 bytes [250 GB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: ATA/ATAPI-7 (minor revision not indicated) Local Time is: Thu Sep 2 10:15:52 2021 +09 SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Unexpected SCT status 0xffff (action_code=4, function_code=2) Wt Cache Reorder: Unknown (SCT Feature Control command failed) === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 433) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 56) minutes. SCT capabilities: (0x0035) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 100 253 006 - 0 3 Spin_Up_Time -O---- 098 097 000 - 0 4 Start_Stop_Count -O--CK 099 099 020 - 1676 5 Reallocated_Sector_Ct PO--CK 099 099 036 - 75 7 Seek_Error_Rate POSR-- 082 060 030 - 189721027 9 Power_On_Hours -O--CK 023 023 000 - 68178 10 Spin_Retry_Count PO--C- 100 100 097 - 0 12 Power_Cycle_Count PO--CK 099 099 020 - 1672 184 End-to-End_Error PO--CK 100 253 097 - 0 187 Reported_Uncorrect -O-RCK 001 001 000 - 928 189 High_Fly_Writes -O---K 100 100 045 - 0 190 Airflow_Temperature_Cel -O---K 063 052 000 - 37 (Min/Max 11/48) 194 Temperature_Celsius -O-RC- 037 048 000 - 37 (0 11 0 0 0) 195 Hardware_ECC_Recovered -O--C- 070 064 000 - 99067671 197 Current_Pending_Sector ----C- 100 100 000 - 0 198 Offline_Uncorrectable -OSRCK 100 100 000 - 0 199 UDMA_CRC_Error_Count ------ 200 200 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 GPL,SL R/O 1 Summary SMART error log 0x02 GPL,SL R/O 5 Comprehensive SMART error log 0x03 GPL,SL R/O 5 Ext. Comprehensive SMART error log 0x06 GPL,SL R/O 1 SMART self-test log 0x07 GPL,SL R/O 1 Extended self-test log 0x09 GPL,SL R/W 1 Selective self-test log 0x10 GPL,SL R/O 1 NCQ Command Error log 0x11 GPL,SL R/O 1 SATA Phy Event Counters log 0x20 GPL,SL R/O 1 Streaming performance log [OBS-8] 0x21 GPL,SL R/O 1 Write stream error log 0x22 GPL,SL R/O 1 Read stream error log 0x23 GPL,SL R/O 1 Delayed sector log [OBS-8] 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0 GPL,SL VS 1 Device vendor specific log 0xa1 GPL,SL VS 20 Device vendor specific log 0xa2 GPL,SL VS 101 Device vendor specific log 0xa8 GPL,SL VS 20 Device vendor specific log 0xa9 GPL,SL VS 1 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer 0xff GPL - 23040 Reserved SMART Extended Comprehensive Error Log Version: 1 (5 sectors) Device Error Count: 943 (device log contains only the most recent 20 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 943 [2] occurred at disk power-on lifetime: 25108 hours (1046 days + 4 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 d5 00 01 b6 e0 00 Error: UNC at LBA = 0xd50001b6 = 3573547446 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 08 00 00 d5 00 01 af e0 00 00:09:36.966 READ DMA EXT 25 00 00 00 08 00 00 d5 00 01 af e0 00 00:09:40.993 READ DMA EXT 25 00 00 00 08 00 14 ef 00 f4 af e0 00 00:09:37.058 READ DMA EXT 25 00 00 00 08 00 14 ef 00 f4 c7 e0 00 00:09:37.057 READ DMA EXT 25 00 00 00 08 00 14 be 00 eb cf e0 00 00:09:37.053 READ DMA EXT Error 942 [1] occurred at disk power-on lifetime: 25108 hours (1046 days + 4 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 d5 00 01 b6 e0 00 Error: UNC at LBA = 0xd50001b6 = 3573547446 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 08 00 00 d5 00 01 af e0 00 00:09:36.966 READ DMA EXT 25 00 00 00 08 00 14 ef 00 f4 af e0 00 00:09:36.950 READ DMA EXT 25 00 00 00 08 00 14 ef 00 f4 c7 e0 00 00:09:37.058 READ DMA EXT 25 00 00 00 08 00 14 be 00 eb cf e0 00 00:09:37.057 READ DMA EXT 25 00 00 00 08 00 00 b8 00 01 1f e0 00 00:09:37.053 READ DMA EXT Error 941 [0] occurred at disk power-on lifetime: 25108 hours (1046 days + 4 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 d1 00 01 d7 e0 00 Error: UNC at LBA = 0xd10001d7 = 3506438615 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 08 00 00 d1 00 01 d7 e0 00 00:01:57.556 READ DMA EXT 35 00 00 00 08 00 00 c9 00 93 e7 e0 00 00:01:57.556 WRITE DMA EXT 35 00 00 00 08 00 00 dd 00 93 3f e0 00 00:02:04.191 WRITE DMA EXT 25 00 00 00 08 00 00 d1 00 01 d7 e0 00 00:02:04.191 READ DMA EXT 25 00 00 00 08 00 14 f8 00 d9 1f e0 00 00:02:04.191 READ DMA EXT Error 940 [19] occurred at disk power-on lifetime: 25108 hours (1046 days + 4 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 d1 00 01 d7 e0 00 Error: UNC at LBA = 0xd10001d7 = 3506438615 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 d8 00 08 00 00 d1 00 01 d7 e0 00 00:05:23.502 READ DMA EXT 35 00 d8 00 08 00 14 d7 00 f4 df e0 00 00:05:23.502 WRITE DMA EXT 35 00 d8 00 08 00 14 f6 00 d9 57 e0 00 00:05:23.502 WRITE DMA EXT 35 00 d8 00 08 00 14 f6 00 d9 07 e0 00 00:05:23.502 WRITE DMA EXT 35 00 d8 00 08 00 14 b4 00 9f c7 e0 00 00:05:23.502 WRITE DMA EXT Error 939 [18] occurred at disk power-on lifetime: 25108 hours (1046 days + 4 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 d5 00 01 b6 e0 00 Error: UNC at LBA = 0xd50001b6 = 3573547446 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 08 00 00 d5 00 01 af e0 00 00:09:36.966 READ DMA EXT 25 00 00 00 08 00 00 d5 00 01 af e0 00 00:09:40.993 READ DMA EXT 25 00 00 00 08 00 14 ef 00 f4 af e0 00 00:09:37.058 READ DMA EXT 25 00 00 00 08 00 14 ef 00 f4 c7 e0 00 00:09:37.057 READ DMA EXT 25 00 00 00 08 00 14 be 00 eb cf e0 00 00:09:37.053 READ DMA EXT Error 938 [17] occurred at disk power-on lifetime: 25108 hours (1046 days + 4 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 d5 00 01 b6 e0 00 Error: UNC at LBA = 0xd50001b6 = 3573547446 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 08 00 00 d5 00 01 af e0 00 00:09:36.966 READ DMA EXT 25 00 00 00 08 00 14 ef 00 f4 af e0 00 00:09:36.950 READ DMA EXT 25 00 00 00 08 00 14 ef 00 f4 c7 e0 00 00:09:37.058 READ DMA EXT 25 00 00 00 08 00 14 be 00 eb cf e0 00 00:09:37.057 READ DMA EXT 25 00 00 00 08 00 00 b8 00 01 1f e0 00 00:09:37.053 READ DMA EXT Error 937 [16] occurred at disk power-on lifetime: 25108 hours (1046 days + 4 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 d1 00 01 d7 e0 00 Error: UNC at LBA = 0xd10001d7 = 3506438615 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 08 00 00 d1 00 01 d7 e0 00 00:01:57.556 READ DMA EXT 35 00 00 00 08 00 00 c9 00 93 e7 e0 00 00:01:57.556 WRITE DMA EXT 35 00 00 00 08 00 00 dd 00 93 3f e0 00 00:02:04.191 WRITE DMA EXT 25 00 00 00 08 00 00 d1 00 01 d7 e0 00 00:02:04.191 READ DMA EXT 25 00 00 00 08 00 14 f8 00 d9 1f e0 00 00:02:04.191 READ DMA EXT Error 936 [15] occurred at disk power-on lifetime: 25108 hours (1046 days + 4 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 d1 00 01 d7 e0 00 Error: UNC at LBA = 0xd10001d7 = 3506438615 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 d8 00 08 00 00 d1 00 01 d7 e0 00 00:05:23.502 READ DMA EXT 35 00 d8 00 08 00 14 d7 00 f4 df e0 00 00:05:23.502 WRITE DMA EXT 35 00 d8 00 08 00 14 f6 00 d9 57 e0 00 00:05:23.502 WRITE DMA EXT 35 00 d8 00 08 00 14 f6 00 d9 07 e0 00 00:05:23.502 WRITE DMA EXT 35 00 d8 00 08 00 14 b4 00 9f c7 e0 00 00:05:23.502 WRITE DMA EXT SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed without error 00% 2563 - # 2 Short offline Completed without error 00% 2446 - # 3 Extended offline Completed without error 00% 2266 - # 4 Extended offline Completed without error 00% 2054 - # 5 Extended offline Completed without error 00% 1887 - # 6 Extended offline Completed without error 00% 1719 - # 7 Extended offline Completed without error 00% 1586 - # 8 Extended offline Completed without error 00% 1418 - # 9 Extended offline Completed without error 00% 1109 - #10 Extended offline Completed without error 00% 627 - #11 Extended offline Completed without error 00% 460 - #12 Extended offline Completed without error 00% 295 - #13 Extended offline Completed without error 00% 65531 - #14 Extended offline Completed without error 00% 65364 - #15 Extended offline Completed without error 00% 65073 - #16 Extended offline Completed without error 00% 64906 - #17 Extended offline Completed without error 00% 64105 - #18 Extended offline Completed without error 00% 63939 - #19 Extended offline Completed without error 00% 63775 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 2 SCT Version (vendor specific): 521 (0x0209) Device State: Active (0) Current Temperature: 37 Celsius Power Cycle Min/Max Temperature: --/48 Celsius Lifetime Min/Max Temperature: --/48 Celsius Another SCT command is executing, abort Read Data Table (SCT ext_status_code 0xffff, action_code=4, function_code=2) Read SCT Temperature History failed SCT Error Recovery Control command not supported Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x000a 2 5 Device-to-host register FISes sent due to a COMRESET 0x0001 2 0 Command failed due to ICRC error 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0009 2 4 Transition from drive PhyRdy to drive PhyNRdy 0x8002 2 0 Vendor specific 0x8003 2 4 Vendor specific 0x8004 2 0 Vendor specific /dev/sdb smartctl 7.1 2019-12-30 r5022 [x86_64-linux-4.15.0-desktop-122.124.1rosa-x86_64] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Seagate Barracuda 7200.9 Device Model: ST3808110AS Serial Number: -- Firmware Version: 3.AAH User Capacity: 80,026,361,856 bytes [80.0 GB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: ATA/ATAPI-7 (minor revision not indicated) Local Time is: Thu Sep 2 10:15:52 2021 +09 SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Unavailable === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 430) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 27) minutes. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 115 075 006 - 98363736 3 Spin_Up_Time PO---- 093 093 000 - 0 4 Start_Stop_Count -O--CK 098 098 020 - 2271 5 Reallocated_Sector_Ct PO--CK 099 099 036 - 67 7 Seek_Error_Rate POSR-- 090 060 030 - 941640964 9 Power_On_Hours -O--CK 071 071 000 - 26004 10 Spin_Retry_Count PO--C- 100 099 097 - 0 12 Power_Cycle_Count -O--CK 099 099 020 - 1831 187 Reported_Uncorrect -O--CK 001 001 000 - 7344 189 High_Fly_Writes -O-RCK 100 100 000 - 0 190 Airflow_Temperature_Cel -O---K 063 048 045 - 37 (0 2 38 34 0) 194 Temperature_Celsius -O---K 037 052 000 - 37 (0 4 0 0 0) 195 Hardware_ECC_Recovered -O-RC- 053 042 000 - 63177643 197 Current_Pending_Sector -O--C- 100 100 000 - 0 198 Offline_Uncorrectable ----C- 100 100 000 - 0 199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 200 Multi_Zone_Error_Rate ------ 100 253 000 - 0 202 Data_Address_Mark_Errs -O--CK 100 253 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 GPL,SL R/O 1 Summary SMART error log 0x02 GPL,SL R/O 5 Comprehensive SMART error log 0x03 GPL,SL R/O 5 Ext. Comprehensive SMART error log 0x06 GPL,SL R/O 1 SMART self-test log 0x07 GPL,SL R/O 1 Extended self-test log 0x09 GPL,SL R/W 1 Selective self-test log 0x10 GPL,SL R/O 1 NCQ Command Error log 0x11 GPL,SL R/O 1 SATA Phy Event Counters log 0x20 GPL,SL R/O 1 Streaming performance log [OBS-8] 0x21 GPL,SL R/O 1 Write stream error log 0x22 GPL,SL R/O 1 Read stream error log 0x23 GPL,SL R/O 1 Delayed sector log [OBS-8] 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0 GPL,SL VS 1 Device vendor specific log 0xa1 GPL,SL VS 20 Device vendor specific log 0xa2 GPL,SL VS 101 Device vendor specific log 0xa8 GPL,SL VS 20 Device vendor specific log 0xa9 GPL,SL VS 1 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer 0xff GPL - 23040 Reserved SMART Extended Comprehensive Error Log Version: 1 (5 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed without error 00% 25935 - # 2 Short offline Completed without error 00% 25820 - # 3 Extended offline Completed without error 00% 25662 - # 4 Extended offline Completed without error 00% 25477 - # 5 Extended offline Completed without error 00% 25329 - # 6 Extended offline Completed without error 00% 25184 - # 7 Extended offline Completed without error 00% 25066 - # 8 Extended offline Completed without error 00% 24920 - # 9 Extended offline Completed without error 00% 24648 - #10 Extended offline Completed without error 00% 24226 - #11 Extended offline Completed without error 00% 24080 - #12 Extended offline Completed without error 00% 23936 - #13 Extended offline Completed without error 00% 23668 - #14 Extended offline Completed without error 00% 23521 - #15 Extended offline Completed without error 00% 23266 - #16 Extended offline Completed without error 00% 23120 - #17 Extended offline Completed without error 00% 22418 - #18 Extended offline Completed without error 00% 22272 - #19 Extended offline Completed without error 00% 22128 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Commands not supported Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x000a 2 16 Device-to-host register FISes sent due to a COMRESET 0x0001 2 0 Command failed due to ICRC error 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS