/dev/sda smartctl 7.4 2023-08-01 r5530 [x86_64-linux-6.13.9-desktop-3omv2590] (OpenMandriva Lx 7.4-1) Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Blue Mobile Device Model: WDC WD5000LPVX-00V0TT0 Serial Number: -- LU WWN Device Id: 5 0014ee ... Firmware Version: 01.01A01 User Capacity: 500,107,862,016 bytes [500 GB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5400 rpm Device is: In smartctl database ATA Version is: ACS-2 (minor revision not indicated) SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Thu Apr 17 03:39:20 2025 BST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 128 (minimum power consumption without standby) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x80) Offline data collection activity was never started. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 9000) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 104) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x7035) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 3 Spin_Up_Time POS--K 151 144 021 - 1441 4 Start_Stop_Count -O--CK 100 100 000 - 24 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 9 Power_On_Hours -O--CK 100 100 000 - 8 10 Spin_Retry_Count -O--CK 100 253 000 - 0 11 Calibration_Retry_Count -O--CK 100 253 000 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 24 192 Power-Off_Retract_Count -O--CK 200 200 000 - 12 193 Load_Cycle_Count -O--CK 200 200 000 - 35 194 Temperature_Celsius -O---K 112 102 000 - 31 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 0 198 Offline_Uncorrectable ----CK 100 253 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 200 Multi_Zone_Error_Rate ---R-- 100 253 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb6 GPL,SL VS 1 Device vendor specific log 0xb7 GPL,SL VS 38 Device vendor specific log 0xbd GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 93 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 258 (0x0102) Device State: Active (0) Current Temperature: 31 Celsius Power Cycle Min/Max Temperature: 31/31 Celsius Lifetime Min/Max Temperature: 18/41 Celsius Under/Over Temperature Limit Count: 0/0 Vendor specific: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 128 (12) Index Estimated Time Temperature Celsius 13 2025-04-17 01:32 35 **************** ... ..( 3 skipped). .. **************** 17 2025-04-17 01:36 35 **************** 18 2025-04-17 01:37 36 ***************** ... ..( 2 skipped). .. ***************** 21 2025-04-17 01:40 36 ***************** 22 2025-04-17 01:41 35 **************** ... ..( 2 skipped). .. **************** 25 2025-04-17 01:44 35 **************** 26 2025-04-17 01:45 34 *************** ... ..( 14 skipped). .. *************** 41 2025-04-17 02:00 34 *************** 42 2025-04-17 02:01 35 **************** 43 2025-04-17 02:02 35 **************** 44 2025-04-17 02:03 34 *************** ... ..( 2 skipped). .. *************** 47 2025-04-17 02:06 34 *************** 48 2025-04-17 02:07 35 **************** ... ..( 16 skipped). .. **************** 65 2025-04-17 02:24 35 **************** 66 2025-04-17 02:25 36 ***************** ... ..( 11 skipped). .. ***************** 78 2025-04-17 02:37 36 ***************** 79 2025-04-17 02:38 35 **************** ... ..( 5 skipped). .. **************** 85 2025-04-17 02:44 35 **************** 86 2025-04-17 02:45 34 *************** ... ..( 8 skipped). .. *************** 95 2025-04-17 02:54 34 *************** 96 2025-04-17 02:55 35 **************** ... ..( 12 skipped). .. **************** 109 2025-04-17 03:08 35 **************** 110 2025-04-17 03:09 34 *************** ... ..( 4 skipped). .. *************** 115 2025-04-17 03:14 34 *************** 116 2025-04-17 03:15 33 ************** 117 2025-04-17 03:16 33 ************** 118 2025-04-17 03:17 33 ************** 119 2025-04-17 03:18 ? - 120 2025-04-17 03:19 33 ************** 121 2025-04-17 03:20 33 ************** 122 2025-04-17 03:21 ? - 123 2025-04-17 03:22 32 ************* 124 2025-04-17 03:23 ? - 125 2025-04-17 03:24 31 ************ 126 2025-04-17 03:25 ? - 127 2025-04-17 03:26 31 ************ 0 2025-04-17 03:27 ? - 1 2025-04-17 03:28 31 ************ 2 2025-04-17 03:29 ? - 3 2025-04-17 03:30 31 ************ 4 2025-04-17 03:31 ? - 5 2025-04-17 03:32 31 ************ ... ..( 6 skipped). .. ************ 12 2025-04-17 03:39 31 ************ SCT Error Recovery Control command not supported Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 3 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 3 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x8000 4 488 Vendor specific