/dev/sde smartctl 7.2 2020-12-30 r5155 [x86_64-linux-6.6.32-power-1bP] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: SSDPR-CX400-256-G2 Serial Number: -- Info LU WWN Device Id: 0 000000 ... Firmware Version: HT3618C1 User Capacity: 256,060,514,304 bytes [256 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Form Factor: 2.5 inches TRIM Command: Available Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ACS-4 T13/BSR INCITS 529 revision 5 SATA Version is: SATA 3.2, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Sun Jun 22 14:53:50 2025 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Unavailable === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 120) seconds. Offline data collection capabilities: (0x5d) SMART execute Offline immediate. No Auto Offline data collection support. Abort Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0002) Does not save SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 4) minutes. Extended self-test routine recommended polling time: ( 8) minutes. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 9 Power_On_Hours -O--CK 100 100 050 - 3358 12 Power_Cycle_Count -O--CK 100 100 050 - 708 160 Unknown_Attribute -O--CK 100 100 050 - 0 161 Unknown_Attribute -O--CK 100 100 050 - 1636 163 Unknown_Attribute -O--CK 100 100 050 - 64 164 Unknown_Attribute -O--CK 100 100 050 - 53 165 Unknown_Attribute -O--CK 100 100 050 - 78 166 Unknown_Attribute -O--CK 100 100 050 - 31 167 Unknown_Attribute -O--CK 100 100 050 - 59 168 Unknown_Attribute -O--CK 100 100 050 - 0 169 Unknown_Attribute -O--CK 100 100 050 - 100 175 Program_Fail_Count_Chip -O--CK 100 100 050 - 16777216 176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 50318 177 Wear_Leveling_Count -O--CK 100 100 050 - 1761840 178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 8 181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 3 182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 192 Power-Off_Retract_Count -O--CK 100 100 050 - 107 194 Temperature_Celsius -O--CK 100 100 050 - 46 195 Hardware_ECC_Recovered -O--CK 100 100 050 - 45067 196 Reallocated_Event_Count -O--CK 100 100 050 - 0 197 Current_Pending_Sector -O--CK 100 100 050 - 0 198 Offline_Uncorrectable -O--CK 100 100 050 - 0 199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0 232 Available_Reservd_Space -O--CK 100 100 050 - 100 241 Total_LBAs_Written -O--CK 100 100 050 - 130995 242 Total_LBAs_Read -O--CK 100 100 050 - 126194 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 GPL,SL R/O 1 Summary SMART error log 0x02 GPL,SL R/O 1 Comprehensive SMART error log 0x03 GPL,SL R/O 1 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 8 Device Statistics log 0x06 GPL,SL R/O 1 SMART self-test log 0x07 GPL,SL R/O 1 Extended self-test log 0x09 GPL,SL R/W 1 Selective self-test log 0x10 GPL,SL R/O 1 NCQ Command Error log 0x11 GPL,SL R/O 1 SATA Phy Event Counters log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0 GPL,SL VS 16 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 0 (1 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Offline Completed without error 00% 2170 - # 2 Offline Self-test routine in progress 10% 2170 - # 3 Offline Self-test routine in progress 10% 2170 - # 4 Offline Self-test routine in progress 10% 2170 - # 5 Offline Self-test routine in progress 10% 2170 - # 6 Offline Self-test routine in progress 10% 2170 - # 7 Offline Self-test routine in progress 10% 2170 - # 8 Offline Self-test routine in progress 10% 2170 - # 9 Offline Self-test routine in progress 10% 2170 - #10 Offline Self-test routine in progress 10% 2170 - #11 Offline Self-test routine in progress 10% 2170 - #12 Offline Self-test routine in progress 10% 2170 - #13 Offline Self-test routine in progress 10% 2170 - #14 Offline Self-test routine in progress 10% 2170 - #15 Offline Self-test routine in progress 10% 2170 - #16 Offline Self-test routine in progress 10% 2170 - #17 Offline Self-test routine in progress 10% 2170 - #18 Offline Self-test routine in progress 10% 2170 - #19 Offline Self-test routine in progress 10% 2170 - SMART Selective self-test log data structure revision number 0 Note: revision number not 1 implies that no selective self-test has ever been run SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Commands not supported Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 708 --- Lifetime Power-On Resets 0x01 0x010 4 3358 --- Power-on Hours 0x01 0x018 6 8584888320 --- Logical Sectors Written 0x01 0x020 6 61247643 --- Number of Write Commands 0x01 0x028 6 8270249984 --- Logical Sectors Read 0x01 0x030 6 67961539 --- Number of Read Commands 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 708 --- Lifetime Power-On Resets 0x01 0x010 4 3358 --- Power-on Hours 0x01 0x018 6 8584888320 --- Logical Sectors Written 0x01 0x020 6 61247643 --- Number of Write Commands 0x01 0x028 6 8270249984 --- Logical Sectors Read 0x01 0x030 6 67961539 --- Number of Read Commands 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 708 --- Lifetime Power-On Resets 0x01 0x010 4 3358 --- Power-on Hours 0x01 0x018 6 8584888320 --- Logical Sectors Written 0x01 0x020 6 61247643 --- Number of Write Commands 0x01 0x028 6 8270249984 --- Logical Sectors Read 0x01 0x030 6 67961539 --- Number of Read Commands 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 708 --- Lifetime Power-On Resets 0x01 0x010 4 3358 --- Power-on Hours 0x01 0x018 6 8584888320 --- Logical Sectors Written 0x01 0x020 6 61247643 --- Number of Write Commands 0x01 0x028 6 8270249984 --- Logical Sectors Read 0x01 0x030 6 67961539 --- Number of Read Commands 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 708 --- Lifetime Power-On Resets 0x01 0x010 4 3358 --- Power-on Hours 0x01 0x018 6 8584888320 --- Logical Sectors Written 0x01 0x020 6 61247643 --- Number of Write Commands 0x01 0x028 6 8270249984 --- Logical Sectors Read 0x01 0x030 6 67961539 --- Number of Read Commands 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 708 --- Lifetime Power-On Resets 0x01 0x010 4 3358 --- Power-on Hours 0x01 0x018 6 8584888320 --- Logical Sectors Written 0x01 0x020 6 61247643 --- Number of Write Commands 0x01 0x028 6 8270249984 --- Logical Sectors Read 0x01 0x030 6 67961539 --- Number of Read Commands 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 708 --- Lifetime Power-On Resets 0x01 0x010 4 3358 --- Power-on Hours 0x01 0x018 6 8584888320 --- Logical Sectors Written 0x01 0x020 6 61247643 --- Number of Write Commands 0x01 0x028 6 8270249984 --- Logical Sectors Read 0x01 0x030 6 67961539 --- Number of Read Commands 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 708 --- Lifetime Power-On Resets 0x01 0x010 4 3358 --- Power-on Hours 0x01 0x018 6 8584888320 --- Logical Sectors Written 0x01 0x020 6 61247643 --- Number of Write Commands 0x01 0x028 6 8270249984 --- Logical Sectors Read 0x01 0x030 6 67961539 --- Number of Read Commands |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0009 2 2507 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 121 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS