/dev/sda smartctl 7.4 2023-08-01 r5530 [x86_64-linux-6.6.16-1-lts] (local build) Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: SAMSUNG HD253GJ Serial Number: -- LU WWN Device Id: 5 0024e9 ... Firmware Version: 1AJ10001 User Capacity: 250,059,350,016 bytes [250 GB] Sector Size: 512 bytes logical/physical Rotation Rate: 7200 rpm Form Factor: 3.5 inches Device is: Not in smartctl database 7.3/5528 ATA Version is: ATA8-ACS T13/1699-D revision 6 SATA Version is: SATA 2.6, 3.0 Gb/s Local Time is: Sat Feb 10 19:36:54 2024 +06 SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Disabled APM feature is: Disabled Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 2580) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 43) minutes. SCT capabilities: (0x003f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 100 100 051 - 0 2 Throughput_Performance -OS--K 056 056 000 - 2327 3 Spin_Up_Time PO---K 082 079 025 - 5466 4 Start_Stop_Count -O--CK 091 091 000 - 9354 5 Reallocated_Sector_Ct PO--CK 252 252 010 - 0 7 Seek_Error_Rate -OSR-K 252 252 051 - 0 8 Seek_Time_Performance --S--K 252 252 015 - 0 9 Power_On_Hours -O--CK 100 100 000 - 34729 10 Spin_Retry_Count -O--CK 252 252 051 - 0 11 Calibration_Retry_Count -O--CK 252 252 000 - 0 12 Power_Cycle_Count -O--CK 095 095 000 - 5220 191 G-Sense_Error_Rate -O---K 100 100 000 - 4 192 Power-Off_Retract_Count -O---K 252 252 000 - 0 194 Temperature_Celsius -O---- 062 049 000 - 38 (Min/Max 12/51) 195 Hardware_ECC_Recovered -O-RCK 100 100 000 - 0 196 Reallocated_Event_Count -O--CK 252 252 000 - 0 197 Current_Pending_Sector -O--CK 252 252 000 - 0 198 Offline_Uncorrectable ----CK 252 252 000 - 0 199 UDMA_CRC_Error_Count -OS-CK 100 100 000 - 5 200 Multi_Zone_Error_Rate -O-R-K 100 100 000 - 4618 223 Load_Retry_Count -O--CK 252 252 000 - 0 225 Load_Cycle_Count -O--CK 100 100 000 - 9450 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 2 Comprehensive SMART error log 0x03 GPL R/O 2 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 2 Extended self-test log 0x08 GPL R/O 2 Power Conditions log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (2 sectors) Device Error Count: 7 CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 7 [6] occurred at disk power-on lifetime: 22162 hours (923 days + 10 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 f8 20 00 00 00 00 00 00 40 00 Error: ICRC, ABRT at LBA = 0x00000000 = 0 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 61 00 00 00 00 00 00 01 cd f8 30 40 08 00:00:09.873 WRITE FPDMA QUEUED 61 00 00 00 10 00 00 01 cd f8 20 40 08 00:00:09.932 WRITE FPDMA QUEUED ea 00 00 00 00 00 00 00 00 00 00 e0 08 00:00:09.926 FLUSH CACHE EXT 61 00 00 00 08 00 00 01 cd f8 18 40 08 00:00:09.926 WRITE FPDMA QUEUED ea 00 00 00 00 00 00 00 00 00 00 e0 08 00:00:09.926 FLUSH CACHE EXT Error 6 [5] occurred at disk power-on lifetime: 22162 hours (923 days + 10 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 f7 00 00 00 00 00 00 00 40 00 Error: ICRC, ABRT at LBA = 0x00000000 = 0 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 61 00 00 00 10 00 00 01 cd f7 00 40 08 00:00:09.842 WRITE FPDMA QUEUED 61 00 00 00 20 00 00 01 cd f6 f0 40 08 00:00:09.879 WRITE FPDMA QUEUED 61 00 00 00 08 00 00 01 91 5f 80 40 08 00:00:09.878 WRITE FPDMA QUEUED 61 00 00 00 08 00 00 01 89 69 00 40 08 00:00:09.878 WRITE FPDMA QUEUED 61 00 00 00 08 00 00 00 09 68 00 40 08 00:00:09.878 WRITE FPDMA QUEUED Error 5 [4] occurred at disk power-on lifetime: 22162 hours (923 days + 10 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 f6 a8 00 00 00 00 00 00 40 00 Error: ICRC, ABRT at LBA = 0x00000000 = 0 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 61 00 00 00 00 00 00 01 cd f6 b8 40 08 00:00:09.769 WRITE FPDMA QUEUED 61 00 00 00 10 00 00 01 cd f6 a8 40 08 00:00:09.869 WRITE FPDMA QUEUED ea 00 00 00 00 00 00 00 00 00 00 e0 08 00:00:09.864 FLUSH CACHE EXT 61 00 00 00 08 00 00 01 cd f6 a0 40 08 00:00:09.864 WRITE FPDMA QUEUED ea 00 00 00 00 00 00 00 00 00 00 e0 08 00:00:09.864 FLUSH CACHE EXT Error 4 [3] occurred at disk power-on lifetime: 22162 hours (923 days + 10 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 f6 18 00 00 00 00 00 00 40 00 Error: ICRC, ABRT at LBA = 0x00000000 = 0 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 61 00 00 00 10 00 00 01 cd f6 08 40 08 00:00:09.769 WRITE FPDMA QUEUED 61 00 00 00 10 00 00 01 cd f6 08 40 08 00:00:09.842 WRITE FPDMA QUEUED ea 00 00 00 00 00 00 00 00 00 00 e0 08 00:00:09.835 FLUSH CACHE EXT 61 00 00 00 08 00 00 01 cd f6 00 40 08 00:00:09.835 WRITE FPDMA QUEUED ea 00 00 00 00 00 00 00 00 00 00 e0 08 00:00:09.835 FLUSH CACHE EXT Error 3 [2] occurred at disk power-on lifetime: 21401 hours (891 days + 17 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 04 a8 00 00 00 00 00 00 40 00 Error: ICRC, ABRT at LBA = 0x00000000 = 0 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 00 60 00 00 00 d1 04 68 40 08 00:00:09.587 READ FPDMA QUEUED 60 00 00 00 80 00 00 00 d1 04 48 40 08 00:00:09.588 READ FPDMA QUEUED ea 00 00 00 00 00 00 00 00 00 00 e0 08 00:00:09.588 FLUSH CACHE EXT 60 00 00 00 20 00 00 00 d1 04 28 40 08 00:00:09.588 READ FPDMA QUEUED 60 00 00 00 28 00 00 00 95 4b 90 40 08 00:00:09.588 READ FPDMA QUEUED Error 2 [1] occurred at disk power-on lifetime: 6322 hours (263 days + 10 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 10 -- 51 00 01 00 00 74 70 6d ae 40 00 Error: IDNF 1 sectors at LBA = 0x74706dae = 1953525166 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 01 00 00 74 70 6d ae 40 00 00:00:00.020 READ DMA EXT 40 00 00 00 01 00 00 00 00 00 00 40 00 00:00:00.020 READ VERIFY SECTOR(S) ef 00 90 00 03 00 00 00 00 00 00 40 00 00:00:00.020 SET FEATURES [Disable SATA feature] ef 00 03 00 46 00 00 00 00 00 00 40 00 00:00:00.020 SET FEATURES [Set transfer mode] c6 00 00 00 10 00 00 00 00 00 00 40 00 00:00:00.020 SET MULTIPLE MODE Error 1 [0] occurred at disk power-on lifetime: 6320 hours (263 days + 8 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 10 -- 51 00 01 00 00 74 70 6d ae 40 00 Error: IDNF 1 sectors at LBA = 0x74706dae = 1953525166 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 01 00 00 74 70 6d ae 40 00 00:00:00.114 READ DMA EXT 40 00 00 00 01 00 00 00 00 00 00 40 00 00:00:00.114 READ VERIFY SECTOR(S) ef 00 90 00 03 00 00 00 00 00 00 40 00 00:00:00.114 SET FEATURES [Disable SATA feature] ef 00 03 00 46 00 00 00 00 00 00 40 00 00:00:00.114 SET FEATURES [Set transfer mode] c6 00 00 00 10 00 00 00 00 00 00 40 00 00:00:00.114 SET MULTIPLE MODE SMART Extended Self-test Log Version: 1 (2 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed without error 00% 33194 - # 2 Extended offline Completed without error 00% 33082 - # 3 Extended offline Completed without error 00% 32992 - # 4 Extended offline Completed without error 00% 32890 - # 5 Extended offline Completed without error 00% 32774 - # 6 Extended offline Completed without error 00% 32654 - # 7 Extended offline Completed without error 00% 32502 - # 8 Extended offline Completed without error 00% 32391 - # 9 Short offline Completed without error 00% 26828 - #10 Short offline Completed without error 00% 21332 - #11 Short offline Completed without error 00% 21326 - #12 Short offline Completed without error 00% 13234 - #13 Short offline Completed without error 00% 13217 - #14 Short offline Completed without error 00% 13200 - #15 Short offline Completed without error 00% 11528 - #16 Short offline Completed without error 00% 11520 - #17 Short offline Completed without error 00% 11514 - #18 Short offline Completed without error 00% 11502 - #19 Extended offline Aborted by host 20% 10896 - #20 Short offline Completed without error 00% 10893 - #21 Short offline Completed without error 00% 10886 - SMART Selective self-test log data structure revision number 0 Note: revision number not 1 implies that no selective self-test has ever been run SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Completed [00% left] (0-65535) 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 2 SCT Version (vendor specific): 256 (0x0100) Device State: Active (0) Current Temperature: 38 Celsius Power Cycle Min/Max Temperature: 36/41 Celsius Lifetime Min/Max Temperature: 16/60 Celsius Specified Max Operating Temperature: 80 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 5 minutes Temperature Logging Interval: 5 minutes Min/Max recommended Temperature: -5/80 Celsius Min/Max Temperature Limit: -10/85 Celsius Temperature History Size (Index): 128 (4) Index Estimated Time Temperature Celsius 5 2024-02-10 09:00 36 ***************** ... ..( 14 skipped). .. ***************** 20 2024-02-10 10:15 36 ***************** 21 2024-02-10 10:20 37 ****************** 22 2024-02-10 10:25 36 ***************** ... ..( 34 skipped). .. ***************** 57 2024-02-10 13:20 36 ***************** 58 2024-02-10 13:25 37 ****************** ... ..( 2 skipped). .. ****************** 61 2024-02-10 13:40 37 ****************** 62 2024-02-10 13:45 38 ******************* ... ..( 4 skipped). .. ******************* 67 2024-02-10 14:10 38 ******************* 68 2024-02-10 14:15 37 ****************** ... ..( 6 skipped). .. ****************** 75 2024-02-10 14:50 37 ****************** 76 2024-02-10 14:55 40 ********************* 77 2024-02-10 15:00 41 ********************** 78 2024-02-10 15:05 40 ********************* 79 2024-02-10 15:10 40 ********************* 80 2024-02-10 15:15 39 ******************** 81 2024-02-10 15:20 38 ******************* 82 2024-02-10 15:25 38 ******************* 83 2024-02-10 15:30 38 ******************* 84 2024-02-10 15:35 37 ****************** 85 2024-02-10 15:40 38 ******************* 86 2024-02-10 15:45 38 ******************* 87 2024-02-10 15:50 37 ****************** 88 2024-02-10 15:55 37 ****************** 89 2024-02-10 16:00 38 ******************* 90 2024-02-10 16:05 37 ****************** 91 2024-02-10 16:10 38 ******************* 92 2024-02-10 16:15 37 ****************** ... ..( 4 skipped). .. ****************** 97 2024-02-10 16:40 37 ****************** 98 2024-02-10 16:45 36 ***************** ... ..( 3 skipped). .. ***************** 102 2024-02-10 17:05 36 ***************** 103 2024-02-10 17:10 37 ****************** ... ..( 7 skipped). .. ****************** 111 2024-02-10 17:50 37 ****************** 112 2024-02-10 17:55 38 ******************* ... ..( 6 skipped). .. ******************* 119 2024-02-10 18:30 38 ******************* 120 2024-02-10 18:35 37 ****************** ... ..( 4 skipped). .. ****************** 125 2024-02-10 19:00 37 ****************** 126 2024-02-10 19:05 38 ******************* ... ..( 5 skipped). .. ******************* 4 2024-02-10 19:35 38 ******************* SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 4 0 Command failed due to ICRC error 0x0002 4 0 R_ERR response for data FIS 0x0003 4 0 R_ERR response for device-to-host data FIS 0x0004 4 0 R_ERR response for host-to-device data FIS 0x0005 4 0 R_ERR response for non-data FIS 0x0006 4 0 R_ERR response for device-to-host non-data FIS 0x0007 4 0 R_ERR response for host-to-device non-data FIS 0x0008 4 0 Device-to-host non-data FIS retries 0x0009 4 2 Transition from drive PhyRdy to drive PhyNRdy 0x000a 4 2 Device-to-host register FISes sent due to a COMRESET 0x000b 4 0 CRC errors within host-to-device FIS 0x000d 4 0 Non-CRC errors within host-to-device FIS 0x000f 4 0 R_ERR response for host-to-device data FIS, CRC 0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC 0x8e00 4 0 Vendor specific 0x8e01 4 0 Vendor specific 0x8e02 4 0 Vendor specific 0x8e03 4 0 Vendor specific 0x8e04 4 0 Vendor specific 0x8e05 4 0 Vendor specific 0x8e06 4 0 Vendor specific 0x8e07 4 0 Vendor specific 0x8e08 4 0 Vendor specific 0x8e09 4 0 Vendor specific 0x8e0a 4 0 Vendor specific 0x8e0b 4 0 Vendor specific 0x8e0c 4 0 Vendor specific 0x8e0d 4 0 Vendor specific 0x8e0e 4 0 Vendor specific 0x8e0f 4 0 Vendor specific 0x8e10 4 0 Vendor specific 0x8e11 4 0 Vendor specific /dev/sdb smartctl 7.4 2023-08-01 r5530 [x86_64-linux-6.6.16-1-lts] (local build) Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: HyperX Fury 3D 240GB Serial Number: -- LU WWN Device Id: 5 0026b7 ... Firmware Version: S3700100 User Capacity: 240,057,409,536 bytes [240 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device TRIM Command: Available Device is: Not in smartctl database 7.3/5528 ATA Version is: ACS-3 T13/2161-D revision 4 SATA Version is: SATA 3.2, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Sat Feb 10 19:36:55 2024 +06 SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Disabled Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Unavailable === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 120) seconds. Offline data collection capabilities: (0x11) SMART execute Offline immediate. No Auto Offline data collection support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. No Selective Self-test supported. SMART capabilities: (0x0002) Does not save SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 10) minutes. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate -O--CK 100 100 000 - 100 9 Power_On_Hours -O--CK 100 100 000 - 13148 12 Power_Cycle_Count -O--CK 100 100 000 - 1285 148 Unknown_Attribute ------ 100 100 000 - 0 149 Unknown_Attribute ------ 100 100 000 - 0 167 Unknown_Attribute ------ 100 100 000 - 0 168 Unknown_Attribute -O--C- 100 100 000 - 0 169 Unknown_Attribute ------ 100 100 000 - 0 170 Unknown_Attribute ------ 100 100 010 - 0 172 Unknown_Attribute -O--CK 100 100 000 - 0 173 Unknown_Attribute ------ 100 100 000 - 0 181 Program_Fail_Cnt_Total -O--CK 100 100 000 - 0 182 Erase_Fail_Count_Total ------ 100 100 000 - 0 187 Reported_Uncorrect -O--CK 100 100 000 - 0 192 Power-Off_Retract_Count -O--C- 100 100 000 - 275 194 Temperature_Celsius -O---K 037 055 000 - 37 (Min/Max 9/55) 196 Reallocated_Event_Count -O--CK 100 100 000 - 0 199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 218 Unknown_Attribute -O--CK 100 100 000 - 0 231 Unknown_SSD_Attribute ------ 081 081 000 - 81 233 Media_Wearout_Indicator -O--CK 100 100 000 - 12648 241 Total_LBAs_Written -O--CK 100 100 000 - 26296 242 Total_LBAs_Read -O--CK 100 100 000 - 8157 244 Unknown_Attribute ------ 100 100 000 - 191 245 Unknown_Attribute ------ 100 100 000 - 194 246 Unknown_Attribute ------ 100 100 000 - 173106 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 1 Comprehensive SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 8 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xde GPL VS 8 Device vendor specific log SMART Extended Comprehensive Error Log Version: 1 (1 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed without error 00% 11729 - # 2 Extended offline Completed without error 00% 11623 - # 3 Extended offline Completed without error 00% 11542 - # 4 Extended offline Completed without error 00% 11447 - # 5 Extended offline Completed without error 00% 11333 - # 6 Extended offline Completed without error 00% 11218 - # 7 Extended offline Completed without error 00% 11069 - # 8 Extended offline Completed without error 00% 10962 - # 9 Extended offline Completed without error 00% 8391 - #10 Extended offline Completed without error 00% 8305 - #11 Short offline Completed without error 00% 1684 - Selective Self-tests/Logging not supported SCT Commands not supported Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 1285 --- Lifetime Power-On Resets 0x01 0x010 4 13148 --- Power-on Hours 0x01 0x018 6 3607145743 --- Logical Sectors Written 0x01 0x020 6 1705290 --- Number of Write Commands 0x01 0x028 6 4222867640 --- Logical Sectors Read 0x01 0x030 6 143660 --- Number of Read Commands 0x07 ===== = = === == Solid State Device Statistics (rev 1) == 0x07 0x008 1 49 --- Percentage Used Endurance Indicator |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 4 0 Command failed due to ICRC error 0x0002 4 0 R_ERR response for data FIS 0x0005 4 0 R_ERR response for non-data FIS 0x000a 4 2 Device-to-host register FISes sent due to a COMRESET /dev/sdc smartctl 7.4 2023-08-01 r5530 [x86_64-linux-6.6.16-1-lts] (local build) Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Seagate Barracuda 7200.14 (AF) Device Model: ST1000DM003-9YN162 Serial Number: -- LU WWN Device Id: 5 000c50 ... Firmware Version: CC4D User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 7200 rpm Device is: In smartctl database 7.3/5528 ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Sat Feb 10 19:36:55 2024 +06 ==> WARNING: A firmware update for this drive may be available, see the following Seagate web pages: http://knowledge.seagate.com/articles/en_US/FAQ/207931en http://knowledge.seagate.com/articles/en_US/FAQ/223651en SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 128 (minimum power consumption without standby) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Unavailable === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 575) seconds. Offline data collection capabilities: (0x73) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 111) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x3085) SCT Status supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 099 090 006 - 178305640 3 Spin_Up_Time PO---- 097 097 000 - 0 4 Start_Stop_Count -O--CK 094 094 020 - 6341 5 Reallocated_Sector_Ct PO--CK 051 051 036 - 65008 7 Seek_Error_Rate POSR-- 065 060 030 - 670455174171 9 Power_On_Hours -O--CK 056 056 000 - 39092 10 Spin_Retry_Count PO--C- 100 100 097 - 0 12 Power_Cycle_Count -O--CK 096 096 020 - 4928 183 Runtime_Bad_Block -O--CK 100 100 000 - 0 184 End-to-End_Error -O--CK 100 100 099 - 0 187 Reported_Uncorrect -O--CK 001 001 000 - 1110 188 Command_Timeout -O--CK 100 099 000 - 46 46 53 189 High_Fly_Writes -O-RCK 097 097 000 - 3 190 Airflow_Temperature_Cel -O---K 061 055 045 - 39 (Min/Max 37/40 #4) 191 G-Sense_Error_Rate -O--CK 100 100 000 - 0 192 Power-Off_Retract_Count -O--CK 100 100 000 - 766 193 Load_Cycle_Count -O--CK 001 001 000 - 274915 194 Temperature_Celsius -O---K 039 045 000 - 39 (128 0 0 0 0) 197 Current_Pending_Sector -O--C- 100 001 000 - 8 198 Offline_Uncorrectable ----C- 100 001 000 - 8 199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 8 240 Head_Flying_Hours ------ 100 253 000 - 26131h+43m+56.523s 241 Total_LBAs_Written ------ 100 253 000 - 268738681536649 242 Total_LBAs_Read ------ 100 253 000 - 254929248958242 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 5 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x21 GPL R/O 1 Write stream error log 0x22 GPL R/O 1 Read stream error log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa1 GPL,SL VS 20 Device vendor specific log 0xa2 GPL VS 4496 Device vendor specific log 0xa8 GPL,SL VS 20 Device vendor specific log 0xa9 GPL,SL VS 1 Device vendor specific log 0xab GPL VS 1 Device vendor specific log 0xb0 GPL VS 5067 Device vendor specific log 0xbd GPL VS 512 Device vendor specific log 0xbe-0xbf GPL VS 65535 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (5 sectors) Device Error Count: 464 (device log contains only the most recent 20 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 464 [3] occurred at disk power-on lifetime: 32362 hours (1348 days + 10 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 29 b9 c8 b0 00 00 Error: UNC at LBA = 0x29b9c8b0 = 700041392 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 01 00 00 00 2b c3 e6 60 40 00 08:58:04.320 READ FPDMA QUEUED 60 00 00 01 00 00 00 2b c3 e5 60 40 00 08:58:04.320 READ FPDMA QUEUED 60 00 00 01 00 00 00 2b c3 e4 60 40 00 08:58:04.320 READ FPDMA QUEUED 60 00 00 01 00 00 00 2b c3 e3 60 40 00 08:58:04.320 READ FPDMA QUEUED 60 00 00 00 80 00 00 29 b9 c9 60 40 00 08:58:04.319 READ FPDMA QUEUED Error 463 [2] occurred at disk power-on lifetime: 32362 hours (1348 days + 10 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 29 b9 c8 b0 00 00 Error: UNC at LBA = 0x29b9c8b0 = 700041392 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 00 80 00 00 29 b9 c9 60 40 00 08:58:01.357 READ FPDMA QUEUED 60 00 00 01 00 00 00 29 b9 c8 60 40 00 08:58:01.357 READ FPDMA QUEUED 60 00 00 01 00 00 00 29 b9 c7 60 40 00 08:58:01.357 READ FPDMA QUEUED 60 00 00 01 00 00 00 2b c3 c8 80 40 00 08:58:01.167 READ FPDMA QUEUED 60 00 00 01 00 00 00 2b c3 c7 80 40 00 08:58:01.167 READ FPDMA QUEUED Error 462 [1] occurred at disk power-on lifetime: 19419 hours (809 days + 3 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 00 73 26 70 00 00 Error: UNC at LBA = 0x00732670 = 7546480 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 01 00 00 00 00 73 26 00 40 00 00:08:19.629 READ FPDMA QUEUED 60 00 00 00 02 00 00 00 73 26 6c 40 00 00:08:19.627 READ FPDMA QUEUED 2f 00 00 00 01 00 00 00 00 00 10 e0 00 00:08:19.528 READ LOG EXT 60 00 00 01 00 00 00 00 73 26 00 40 00 00:08:16.778 READ FPDMA QUEUED 60 00 00 00 02 00 00 00 73 26 46 40 00 00:08:16.777 READ FPDMA QUEUED Error 461 [0] occurred at disk power-on lifetime: 19419 hours (809 days + 3 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 00 73 26 70 00 00 Error: UNC at LBA = 0x00732670 = 7546480 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 01 00 00 00 00 73 26 00 40 00 00:08:16.778 READ FPDMA QUEUED 60 00 00 00 02 00 00 00 73 26 46 40 00 00:08:16.777 READ FPDMA QUEUED 2f 00 00 00 01 00 00 00 00 00 10 e0 00 00:08:16.677 READ LOG EXT 60 00 00 01 00 00 00 00 73 26 00 40 00 00:08:13.928 READ FPDMA QUEUED 60 00 00 00 02 00 00 00 73 26 44 40 00 00:08:13.926 READ FPDMA QUEUED Error 460 [19] occurred at disk power-on lifetime: 19419 hours (809 days + 3 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 00 73 26 70 00 00 Error: UNC at LBA = 0x00732670 = 7546480 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 01 00 00 00 00 73 26 00 40 00 00:08:13.928 READ FPDMA QUEUED 60 00 00 00 02 00 00 00 73 26 44 40 00 00:08:13.926 READ FPDMA QUEUED 2f 00 00 00 01 00 00 00 00 00 10 e0 00 00:08:13.827 READ LOG EXT 60 00 00 01 00 00 00 00 73 26 00 40 00 00:08:11.069 READ FPDMA QUEUED 60 00 00 00 02 00 00 00 73 26 42 40 00 00:08:11.067 READ FPDMA QUEUED Error 459 [18] occurred at disk power-on lifetime: 19419 hours (809 days + 3 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 00 73 26 70 00 00 Error: UNC at LBA = 0x00732670 = 7546480 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 01 00 00 00 00 73 26 00 40 00 00:08:11.069 READ FPDMA QUEUED 60 00 00 00 02 00 00 00 73 26 42 40 00 00:08:11.067 READ FPDMA QUEUED 2f 00 00 00 01 00 00 00 00 00 10 e0 00 00:08:10.968 READ LOG EXT 60 00 00 01 00 00 00 00 73 26 00 40 00 00:08:08.196 READ FPDMA QUEUED 60 00 00 00 02 00 00 00 73 26 34 40 00 00:08:08.142 READ FPDMA QUEUED Error 458 [17] occurred at disk power-on lifetime: 19419 hours (809 days + 3 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 00 73 26 70 00 00 Error: UNC at LBA = 0x00732670 = 7546480 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 01 00 00 00 00 73 26 00 40 00 00:08:08.196 READ FPDMA QUEUED 60 00 00 00 02 00 00 00 73 26 34 40 00 00:08:08.142 READ FPDMA QUEUED 2f 00 00 00 01 00 00 00 00 00 10 e0 00 00:08:08.042 READ LOG EXT 60 00 00 01 00 00 00 00 73 26 00 40 00 00:08:05.204 READ FPDMA QUEUED 60 00 00 00 02 00 00 00 73 26 32 40 00 00:08:05.202 READ FPDMA QUEUED Error 457 [16] occurred at disk power-on lifetime: 19419 hours (809 days + 3 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 00 73 26 70 00 00 Error: UNC at LBA = 0x00732670 = 7546480 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 01 00 00 00 00 73 26 00 40 00 00:08:05.204 READ FPDMA QUEUED 60 00 00 00 02 00 00 00 73 26 32 40 00 00:08:05.202 READ FPDMA QUEUED 61 00 00 00 02 00 00 00 73 26 32 40 00 00:08:05.202 WRITE FPDMA QUEUED 60 00 00 00 02 00 00 00 73 26 32 40 00 00:08:05.201 READ FPDMA QUEUED 2f 00 00 00 01 00 00 00 00 00 10 e0 00 00:08:05.167 READ LOG EXT SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed: read failure 90% 37572 134636984 # 2 Extended offline Completed: read failure 90% 37460 134636984 # 3 Extended offline Completed: read failure 90% 37370 134636984 # 4 Extended offline Completed: read failure 90% 37268 134636984 # 5 Extended offline Completed: read failure 90% 37152 134636984 # 6 Extended offline Completed: read failure 90% 37032 134636984 # 7 Extended offline Completed without error 00% 36882 - # 8 Extended offline Completed without error 00% 36771 - # 9 Extended offline Completed without error 00% 34122 - #10 Extended offline Completed without error 00% 34032 - #11 Short offline Completed without error 00% 27212 - #12 Short offline Completed without error 00% 21674 - #13 Short offline Completed without error 00% 21669 - #14 Short offline Completed without error 00% 13202 - #15 Short offline Completed without error 00% 13185 - #16 Short offline Completed without error 00% 13168 - #17 Short offline Completed without error 00% 11462 - #18 Short offline Completed without error 00% 11454 - #19 Short offline Completed without error 00% 11448 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 522 (0x020a) Device State: Active (0) Current Temperature: 39 Celsius Power Cycle Min/Max Temperature: 37/40 Celsius Lifetime Min/Max Temperature: 10/45 Celsius Under/Over Temperature Limit Count: 0/0 SCT Data Table command not supported SCT Error Recovery Control command not supported Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x000a 2 3 Device-to-host register FISes sent due to a COMRESET 0x0001 2 0 Command failed due to ICRC error 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS