11: PCI 300.0: 0200 Ethernet controller [Created at pci.386] Unique ID: rBUF.fjPIa6PWQp7 Parent ID: 6NW+.mbQGvmFGPp7 SysFS ID: /devices/pci0000:00/0000:00:1e.0/0000:03:00.0 SysFS BusID: 0000:03:00.0 Hardware Class: network Model: "Dell Inspiron 9400 Laptop" Vendor: pci 0x14e4 "Broadcom" Device: pci 0x170c "BCM4401-B0 100Base-TX" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x01cd "Inspiron 9400 Laptop" Revision: 0x02 Driver: "b44" Driver Modules: "b44", "ssb" Device File: eth0 Memory Range: 0xef9fe000-0xef9fffff (rw,non-prefetchable) IRQ: 17 (no events) HW Address: C9CC5984C382D16F0E06460D948913DF Permanent HW Address: C9CC5984C382D16F0E06460D948913DF Link detected: no Module Alias: "pci:v000014E4d0000170Csv00001028sd000001CDbc02sc00i00" Driver Info #0: Driver Status: b44 is active Driver Activation Cmd: "modprobe b44" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #24 (PCI bridge) 12: PCI c00.0: 0282 WLAN controller [Created at pci.386] Unique ID: e9JP.R_3Xvz9I_k9 Parent ID: qTvu.KxZ2I+vnJeF SysFS ID: /devices/pci0000:00/0000:00:1c.1/0000:0c:00.0 SysFS BusID: 0000:0c:00.0 Hardware Class: network Model: "Intel PRO/Wireless 3945ABG [Golan] Network Connection" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x4222 "PRO/Wireless 3945ABG [Golan] Network Connection" SubVendor: pci 0x8086 "Intel Corporation" SubDevice: pci 0x1021 Revision: 0x02 Driver: "iwl3945" Driver Modules: "iwl3945" Device File: wlp12s0 Features: WLAN Memory Range: 0xefcff000-0xefcfffff (rw,non-prefetchable) IRQ: 25 (19901 events) HW Address: 201D490A54E200EFF77CFCC2FDBD777E Permanent HW Address: 201D490A54E200EFF77CFCC2FDBD777E Link detected: yes WLAN channels: 1 2 3 4 5 6 7 8 9 10 11 12 13 34 36 38 40 42 44 46 48 52 56 60 64 100 104 108 112 116 120 124 WLAN frequencies: 2.412 2.417 2.422 2.427 2.432 2.437 2.442 2.447 2.452 2.457 2.462 2.467 2.472 5.17 5.18 5.19 5.2 5.21 5.22 5.23 5.24 5.26 5.28 5.3 5.32 5.5 5.52 5.54 5.56 5.58 5.6 5.62 WLAN encryption modes: WEP40 WEP104 TKIP CCMP WLAN authentication modes: open sharedkey wpa-psk wpa-eap Module Alias: "pci:v00008086d00004222sv00008086sd00001021bc02sc80i00" Driver Info #0: Driver Status: iwl3945 is active Driver Activation Cmd: "modprobe iwl3945" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #27 (PCI bridge) 13: PCI 1f.2: 0101 IDE interface (ISA Compatibility mode-only controller, supports bus mastering) [Created at pci.386] Unique ID: w7Y8.U6ear4DYkHB SysFS ID: /devices/pci0000:00/0000:00:1f.2 SysFS BusID: 0000:00:1f.2 Hardware Class: storage Model: "Intel 82801GBM/GHM (ICH7-M Family) SATA Controller [IDE mode]" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x27c4 "82801GBM/GHM (ICH7-M Family) SATA Controller [IDE mode]" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x01cd Revision: 0x01 Driver: "ata_piix" Driver Modules: "ata_piix" I/O Ports: 0x1f0-0x1f7 (rw) I/O Port: 0x3f6 (rw) I/O Ports: 0x170-0x177 (rw) I/O Port: 0x376 (rw) I/O Ports: 0xbfa0-0xbfaf (rw) IRQ: 17 (no events) Module Alias: "pci:v00008086d000027C4sv00001028sd000001CDbc01sc01i80" Driver Info #0: Driver Status: ata_piix is active Driver Activation Cmd: "modprobe ata_piix" Driver Info #1: Driver Status: ata_generic is active Driver Activation Cmd: "modprobe ata_generic" Driver Info #2: Driver Status: pata_acpi is active Driver Activation Cmd: "modprobe pata_acpi" Config Status: cfg=new, avail=yes, need=no, active=unknown 14: PCI 1c.0: 0604 PCI bridge (Normal decode) [Created at pci.386] Unique ID: z8Q3.I6hYKsgNGtE SysFS ID: /devices/pci0000:00/0000:00:1c.0 SysFS BusID: 0000:00:1c.0 Hardware Class: bridge Model: "Intel NM10/ICH7 Family PCI Express Port 1" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x27d0 "NM10/ICH7 Family PCI Express Port 1" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x01cd Revision: 0x01 Driver: "pcieport" IRQ: 16 (31684 events) Module Alias: "pci:v00008086d000027D0sv00001028sd000001CDbc06sc04i00" Config Status: cfg=new, avail=yes, need=no, active=unknown 15: PCI 301.3: 0880 System peripheral [Created at pci.386] Unique ID: X+oH.oEfIomCuEzD Parent ID: 6NW+.mbQGvmFGPp7 SysFS ID: /devices/pci0000:00/0000:00:1e.0/0000:03:01.3 SysFS BusID: 0000:03:01.3 Hardware Class: unknown Model: "Ricoh xD-Picture Card Controller" Vendor: pci 0x1180 "Ricoh Co Ltd" Device: pci 0x0852 "xD-Picture Card Controller" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x01cd Revision: 0x05 Driver: "r852" Driver Modules: "r852" Memory Range: 0xef9fd700-0xef9fd7ff (rw,non-prefetchable) IRQ: 18 (no events) Module Alias: "pci:v00001180d00000852sv00001028sd000001CDbc08sc80i00" Driver Info #0: Driver Status: r852 is active Driver Activation Cmd: "modprobe r852" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #24 (PCI bridge) 16: PCI 1d.3: 0c03 USB Controller (UHCI) [Created at pci.386] Unique ID: eEx1.IkraFNyHa+E SysFS ID: /devices/pci0000:00/0000:00:1d.3 SysFS BusID: 0000:00:1d.3 Hardware Class: usb controller Model: "Intel NM10/ICH7 Family USB UHCI Controller #4" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x27cb "NM10/ICH7 Family USB UHCI Controller #4" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x01cd Revision: 0x01 Driver: "uhci_hcd" Driver Modules: "uhci_hcd" I/O Ports: 0xbf20-0xbf3f (rw) IRQ: 23 (no events) Module Alias: "pci:v00008086d000027CBsv00001028sd000001CDbc0Csc03i00" Driver Info #0: Driver Status: uhci-hcd is active Driver Activation Cmd: "modprobe uhci-hcd" Config Status: cfg=new, avail=yes, need=no, active=unknown 17: PCI 1f.0: 0601 ISA bridge [Created at pci.386] Unique ID: BUZT.uxeB+vR+1i0 SysFS ID: /devices/pci0000:00/0000:00:1f.0 SysFS BusID: 0000:00:1f.0 Hardware Class: bridge Model: "Intel 82801GBM (ICH7-M) LPC Interface Bridge" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x27b9 "82801GBM (ICH7-M) LPC Interface Bridge" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x01cd Revision: 0x01 Driver: "lpc_ich" Driver Modules: "lpc_ich" Module Alias: "pci:v00008086d000027B9sv00001028sd000001CDbc06sc01i00" Driver Info #0: Driver Status: lpc_ich is active Driver Activation Cmd: "modprobe lpc_ich" Driver Info #1: Driver Status: leds_ss4200 is not active Driver Activation Cmd: "modprobe leds_ss4200" Config Status: cfg=new, avail=yes, need=no, active=unknown 18: PCI 301.1: 0805 SD Host controller [Created at pci.386] Unique ID: pLqc.yzwFLIO4KZ6 Parent ID: 6NW+.mbQGvmFGPp7 SysFS ID: /devices/pci0000:00/0000:00:1e.0/0000:03:01.1 SysFS BusID: 0000:03:01.1 Hardware Class: unknown Model: "Ricoh R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter" Vendor: pci 0x1180 "Ricoh Co Ltd" Device: pci 0x0822 "R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x01cd Revision: 0x19 Driver: "sdhci-pci" Driver Modules: "sdhci_pci" Memory Range: 0xef9fd500-0xef9fd5ff (rw,non-prefetchable) IRQ: 18 (no events) Module Alias: "pci:v00001180d00000822sv00001028sd000001CDbc08sc05i01" Driver Info #0: Driver Status: sdhci_pci is active Driver Activation Cmd: "modprobe sdhci_pci" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #24 (PCI bridge) 19: PCI 01.0: 0604 PCI bridge (Normal decode) [Created at pci.386] Unique ID: vSkL.5H3Wrye+jN6 SysFS ID: /devices/pci0000:00/0000:00:01.0 SysFS BusID: 0000:00:01.0 Hardware Class: bridge Model: "Intel Mobile 945GM/PM/GMS, 943/940GML and 945GT Express PCI Express Root Port" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x27a1 "Mobile 945GM/PM/GMS, 943/940GML and 945GT Express PCI Express Root Port" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x01cd Revision: 0x03 Driver: "pcieport" IRQ: 16 (31684 events) Module Alias: "pci:v00008086d000027A1sv00001028sd000001CDbc06sc04i00" Config Status: cfg=new, avail=yes, need=no, active=unknown 20: PCI 1d.1: 0c03 USB Controller (UHCI) [Created at pci.386] Unique ID: vayM.Gvy4IEjtWEE SysFS ID: /devices/pci0000:00/0000:00:1d.1 SysFS BusID: 0000:00:1d.1 Hardware Class: usb controller Model: "Intel NM10/ICH7 Family USB UHCI Controller #2" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x27c9 "NM10/ICH7 Family USB UHCI Controller #2" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x01cd Revision: 0x01 Driver: "uhci_hcd" Driver Modules: "uhci_hcd" I/O Ports: 0xbf60-0xbf7f (rw) IRQ: 21 (no events) Module Alias: "pci:v00008086d000027C9sv00001028sd000001CDbc0Csc03i00" Driver Info #0: Driver Status: uhci-hcd is active Driver Activation Cmd: "modprobe uhci-hcd" Config Status: cfg=new, avail=yes, need=no, active=unknown 21: PCI 100.0: 0300 VGA compatible controller (VGA) [Created at pci.386] Unique ID: VCu0.n397cZg72FD Parent ID: vSkL.5H3Wrye+jN6 SysFS ID: /devices/pci0000:00/0000:00:01.0/0000:01:00.0 SysFS BusID: 0000:01:00.0 Hardware Class: graphics card Model: "ATI RV515/M54 [Mobility Radeon X1400]" Vendor: pci 0x1002 "ATI Technologies Inc" Device: pci 0x7145 "RV515/M54 [Mobility Radeon X1400]" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x2002 Driver: "radeon" Driver Modules: "radeon" Memory Range: 0xd0000000-0xdfffffff (ro,non-prefetchable) I/O Ports: 0xee00-0xeeff (rw) Memory Range: 0xefdf0000-0xefdfffff (rw,non-prefetchable) Memory Range: 0x000c0000-0x000dffff (rw,non-prefetchable,disabled) IRQ: 16 (31684 events) Module Alias: "pci:v00001002d00007145sv00001028sd00002002bc03sc00i00" Driver Info #0: Driver Status: radeon is active Driver Activation Cmd: "modprobe radeon" Driver Info #1: Driver Status: amdgpu is active Driver Activation Cmd: "modprobe amdgpu" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #19 (PCI bridge) 22: PCI 1b.0: 0403 Audio device [Created at pci.386] Unique ID: u1Nb.tEh+NXghu+0 SysFS ID: /devices/pci0000:00/0000:00:1b.0 SysFS BusID: 0000:00:1b.0 Hardware Class: sound Model: "Intel NM10/ICH7 Family High Definition Audio Controller" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x27d8 "NM10/ICH7 Family High Definition Audio Controller" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x01cd Revision: 0x01 Driver: "snd_hda_intel" Driver Modules: "snd_hda_intel" Memory Range: 0xefffc000-0xefffffff (rw,non-prefetchable) IRQ: 24 (246 events) Module Alias: "pci:v00008086d000027D8sv00001028sd000001CDbc04sc03i00" Driver Info #0: Driver Status: snd_hda_intel is active Driver Activation Cmd: "modprobe snd_hda_intel" Config Status: cfg=new, avail=yes, need=no, active=unknown 23: PCI 1c.3: 0604 PCI bridge (Normal decode) [Created at pci.386] Unique ID: Z7uZ.ObL2DHOcQA1 SysFS ID: /devices/pci0000:00/0000:00:1c.3 SysFS BusID: 0000:00:1c.3 Hardware Class: bridge Model: "Intel NM10/ICH7 Family PCI Express Port 4" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x27d6 "NM10/ICH7 Family PCI Express Port 4" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x01cd Revision: 0x01 Driver: "pcieport" IRQ: 19 (2 events) Module Alias: "pci:v00008086d000027D6sv00001028sd000001CDbc06sc04i00" Config Status: cfg=new, avail=yes, need=no, active=unknown 24: PCI 1e.0: 0604 PCI bridge (Subtractive decode) [Created at pci.386] Unique ID: 6NW+.mbQGvmFGPp7 SysFS ID: /devices/pci0000:00/0000:00:1e.0 SysFS BusID: 0000:00:1e.0 Hardware Class: bridge Model: "Intel 82801 Mobile PCI Bridge" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x2448 "82801 Mobile PCI Bridge" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x01cd Revision: 0xe1 Module Alias: "pci:v00008086d00002448sv00001028sd000001CDbc06sc04i01" Config Status: cfg=new, avail=yes, need=no, active=unknown 25: PCI 1f.3: 0c05 SMBus [Created at pci.386] Unique ID: nS1_.3NuE_P4CuZ1 SysFS ID: /devices/pci0000:00/0000:00:1f.3 SysFS BusID: 0000:00:1f.3 Hardware Class: unknown Model: "Intel NM10/ICH7 Family SMBus Controller" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x27da "NM10/ICH7 Family SMBus Controller" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x01cd Revision: 0x01 Driver: "i801_smbus" Driver Modules: "i2c_i801" I/O Ports: 0x10c0-0x10df (rw) IRQ: 17 (no events) Module Alias: "pci:v00008086d000027DAsv00001028sd000001CDbc0Csc05i00" Driver Info #0: Driver Status: i2c_i801 is active Driver Activation Cmd: "modprobe i2c_i801" Config Status: cfg=new, avail=yes, need=no, active=unknown 26: PCI 00.0: 0600 Host bridge [Created at pci.386] Unique ID: qLht.W0MwJHW4OW9 SysFS ID: /devices/pci0000:00/0000:00:00.0 SysFS BusID: 0000:00:00.0 Hardware Class: bridge Model: "Intel Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x27a0 "Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x01cd Revision: 0x03 Module Alias: "pci:v00008086d000027A0sv00001028sd000001CDbc06sc00i00" Driver Info #0: Driver Status: intel_agp is active Driver Activation Cmd: "modprobe intel_agp" Config Status: cfg=new, avail=yes, need=no, active=unknown 27: PCI 1c.1: 0604 PCI bridge (Normal decode) [Created at pci.386] Unique ID: qTvu.KxZ2I+vnJeF SysFS ID: /devices/pci0000:00/0000:00:1c.1 SysFS BusID: 0000:00:1c.1 Hardware Class: bridge Model: "Intel NM10/ICH7 Family PCI Express Port 2" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x27d2 "NM10/ICH7 Family PCI Express Port 2" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x01cd Revision: 0x01 Driver: "pcieport" IRQ: 17 (no events) Module Alias: "pci:v00008086d000027D2sv00001028sd000001CDbc06sc04i00" Config Status: cfg=new, avail=yes, need=no, active=unknown 28: PCI 301.2: 0880 System peripheral [Created at pci.386] Unique ID: ggJS.SiJu8xXsPJ4 Parent ID: 6NW+.mbQGvmFGPp7 SysFS ID: /devices/pci0000:00/0000:00:1e.0/0000:03:01.2 SysFS BusID: 0000:03:01.2 Hardware Class: unknown Model: "Ricoh R5C592 Memory Stick Bus Host Adapter" Vendor: pci 0x1180 "Ricoh Co Ltd" Device: pci 0x0592 "R5C592 Memory Stick Bus Host Adapter" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x01cd Revision: 0x0a Driver: "r592" Driver Modules: "r592" Memory Range: 0xef9fd600-0xef9fd6ff (rw,non-prefetchable) IRQ: 18 (no events) Module Alias: "pci:v00001180d00000592sv00001028sd000001CDbc08sc80i00" Driver Info #0: Driver Status: r592 is active Driver Activation Cmd: "modprobe r592" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #24 (PCI bridge) 29: PCI 1d.2: 0c03 USB Controller (UHCI) [Created at pci.386] Unique ID: mvRC.nJvqmoqa2dE SysFS ID: /devices/pci0000:00/0000:00:1d.2 SysFS BusID: 0000:00:1d.2 Hardware Class: usb controller Model: "Intel NM10/ICH7 Family USB UHCI Controller #3" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x27ca "NM10/ICH7 Family USB UHCI Controller #3" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x01cd Revision: 0x01 Driver: "uhci_hcd" Driver Modules: "uhci_hcd" I/O Ports: 0xbf40-0xbf5f (rw) IRQ: 22 (no events) Module Alias: "pci:v00008086d000027CAsv00001028sd000001CDbc0Csc03i00" Driver Info #0: Driver Status: uhci-hcd is active Driver Activation Cmd: "modprobe uhci-hcd" Config Status: cfg=new, avail=yes, need=no, active=unknown 30: PCI 301.0: 0c00 FireWire (IEEE 1394) (OHCI) [Created at pci.386] Unique ID: x0Ln.1oAnSPwnl69 Parent ID: 6NW+.mbQGvmFGPp7 SysFS ID: /devices/pci0000:00/0000:00:1e.0/0000:03:01.0 SysFS BusID: 0000:03:01.0 Hardware Class: firewire controller Model: "Ricoh R5C832 IEEE 1394 Controller" Vendor: pci 0x1180 "Ricoh Co Ltd" Device: pci 0x0832 "R5C832 IEEE 1394 Controller" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x01cd Driver: "firewire_ohci" Driver Modules: "firewire_ohci" Memory Range: 0xef9fd800-0xef9fdfff (rw,non-prefetchable) IRQ: 19 (2 events) Module Alias: "pci:v00001180d00000832sv00001028sd000001CDbc0Csc00i10" Driver Info #0: Driver Status: ohci1394 is not active Driver Activation Cmd: "modprobe ohci1394" Driver Info #1: Driver Status: firewire_ohci is active Driver Activation Cmd: "modprobe firewire_ohci" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #24 (PCI bridge) 31: PCI 1d.0: 0c03 USB Controller (UHCI) [Created at pci.386] Unique ID: 1GTX.lU0LpfbA+rD SysFS ID: /devices/pci0000:00/0000:00:1d.0 SysFS BusID: 0000:00:1d.0 Hardware Class: usb controller Model: "Intel NM10/ICH7 Family USB UHCI Controller #1" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x27c8 "NM10/ICH7 Family USB UHCI Controller #1" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x01cd Revision: 0x01 Driver: "uhci_hcd" Driver Modules: "uhci_hcd" I/O Ports: 0xbf80-0xbf9f (rw) IRQ: 20 (54286 events) Module Alias: "pci:v00008086d000027C8sv00001028sd000001CDbc0Csc03i00" Driver Info #0: Driver Status: uhci-hcd is active Driver Activation Cmd: "modprobe uhci-hcd" Config Status: cfg=new, avail=yes, need=no, active=unknown 32: PCI 1d.7: 0c03 USB Controller (EHCI) [Created at pci.386] Unique ID: 5YuN.J9OW00ZldD4 SysFS ID: /devices/pci0000:00/0000:00:1d.7 SysFS BusID: 0000:00:1d.7 Hardware Class: usb controller Model: "Intel NM10/ICH7 Family USB2 EHCI Controller" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x27cc "NM10/ICH7 Family USB2 EHCI Controller" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x01cd Revision: 0x01 Driver: "ehci-pci" Driver Modules: "ehci_pci" Memory Range: 0xffa80000-0xffa803ff (rw,non-prefetchable) IRQ: 20 (54286 events) Module Alias: "pci:v00008086d000027CCsv00001028sd000001CDbc0Csc03i20" Driver Info #0: Driver Status: ehci-hcd is active Driver Activation Cmd: "modprobe ehci-hcd" Driver Info #1: Driver Status: ehci_pci is active Driver Activation Cmd: "modprobe ehci_pci" Config Status: cfg=new, avail=yes, need=no, active=unknown 33: None 00.0: 10002 LCD Monitor [Created at monitor.125] Unique ID: rdCR.TXuwCXVLBM9 Parent ID: VCu0.n397cZg72FD Hardware Class: monitor Model: "YD477 171WX2 LCD Monitor" Vendor: LPL "YD477 171WX2" Device: eisa 0x0000 Resolution: 1440x900@60Hz Size: 367x230 mm Year of Manufacture: 2005 Week of Manufacture: 0 Detailed Timings #0: Resolution: 1440x900 Horizontal: 1440 1504 1536 1760 (+64 +96 +320) -hsync Vertical: 900 901 904 912 (+1 +4 +12) -vsync Frequencies: 96.21 MHz, 54.66 kHz, 59.94 Hz Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #21 (VGA compatible controller) 34: SCSI 200.0: 10600 Disk [Created at block.245] Unique ID: Uc5H.9TMIzKzGkj0 Parent ID: 5YuN.J9OW00ZldD4 SysFS ID: /class/block/sdb SysFS BusID: 2:0:0:0 SysFS Device Link: /devices/pci0000:00/0000:00:1d.7/usb1/1-4/1-4:1.0/host2/target2:0:0/2:0:0:0 Hardware Class: disk Model: "Verbatim STORE N GO" Vendor: usb 0x18a5 "Verbatim" Device: usb 0x0243 "STORE N GO" Revision: "PMAP" Serial ID: -- Driver: "usb-storage", "sd" Driver Modules: "usb_storage", "sd_mod" Device File: /dev/sdb (/dev/sg2) Device Files: /dev/sdb, /dev/disk/by-label/OpenMandrivaLx_4.3, /dev/disk/by-path/pci-0000:00:1d.7-usb-0:4:1.0-scsi-0:0:0:0, /dev/disk/by-id/usb-Verbatim_STORE_N_GO_...-0:0, /dev/disk/by-uuid/2022-02-06-00-37-16-00 Device Number: block 8:16-8:31 (char 21:2) Geometry (Logical): CHS 29536/64/32 Size: 60489728 sectors a 512 bytes Capacity: 28 GB (30970740736 bytes) Speed: 480 Mbps Module Alias: "usb:v18A5p0243d0100dc00dsc00dp00ic08isc06ip50in00" Driver Info #0: Driver Status: uas is active Driver Activation Cmd: "modprobe uas" Driver Info #1: Driver Status: usb_storage is active Driver Activation Cmd: "modprobe usb_storage" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #32 (USB Controller) 35: SCSI 100.0: 10602 CD-ROM (DVD) [Created at block.249] Unique ID: KD9E.jFNTutqAnJC Parent ID: w7Y8.U6ear4DYkHB SysFS ID: /class/block/sr0 SysFS BusID: 1:0:0:0 SysFS Device Link: /devices/pci0000:00/0000:00:1f.2/ata2/host1/target1:0:0/1:0:0:0 Hardware Class: cdrom Model: "HL-DT-ST DVD+-RW GSA-T11N" Vendor: "HL-DT-ST" Device: "DVD+-RW GSA-T11N" Revision: "A102" Driver: "ata_piix", "sr" Driver Modules: "ata_piix", "sr_mod" Device File: /dev/sr0 (/dev/sg1) Device Files: /dev/sr0, /dev/cdrw, /dev/disk/by-path/pci-0000:00:1f.2-ata-2.0, /dev/dvdrw, /dev/cdrom, /dev/disk/by-path/pci-0000:00:1f.2-ata-2, /dev/dvd, /dev/disk/by-id/ata-HL-DT-ST_DVD+_-RW_GSA-T11N_... Device Number: block 11:0 (char 21:1) Features: CD-R, CD-RW, DVD, DVD-R, DVD-RW, DVD+R, DVD+RW, DVD+R DL, MRW, MRW-W Drive status: no medium Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #13 (IDE interface) Drive Speed: 24 36: IDE 00.0: 10600 Disk [Created at block.245] Unique ID: 3OOL.+Q5o7BZsM32 Parent ID: w7Y8.U6ear4DYkHB SysFS ID: /class/block/sda SysFS BusID: 0:0:0:0 SysFS Device Link: /devices/pci0000:00/0000:00:1f.2/ata1/host0/target0:0:0/0:0:0:0 Hardware Class: disk Model: "Samsung SSD 860" Vendor: "Samsung" Device: "SSD 860" Revision: "4B6Q" Serial ID: -- Driver: "ata_piix", "sd" Driver Modules: "ata_piix", "sd_mod" Device File: /dev/sda Device Files: /dev/sda, /dev/disk/by-id/wwn-0x..., /dev/disk/by-id/ata-Samsung_SSD_860_EVO_500GB_..., /dev/disk/by-path/pci-0000:00:1f.2-ata-1.0, /dev/disk/by-path/pci-0000:00:1f.2-ata-1 Device Number: block 8:0-8:15 Geometry (Logical): CHS 60801/255/63 Size: 976773168 sectors a 512 bytes Capacity: 465 GB (500107862016 bytes) Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #13 (IDE interface) 37: None 00.0: 10600 Disk [Created at block.245] Unique ID: OKyR.Fxp0d3BezAE SysFS ID: /class/block/zram0 Hardware Class: disk Model: "Disk" Device File: /dev/zram0 Device Number: block 253:0 Size: 414464 sectors a 4096 bytes Capacity: 1 GB (1697644544 bytes) Config Status: cfg=new, avail=yes, need=no, active=unknown 38: USB 00.0: 10a00 Hub [Created at usb.122] Unique ID: uIhY.gkSaZmjGyhD Parent ID: vayM.Gvy4IEjtWEE SysFS ID: /devices/pci0000:00/0000:00:1d.1/usb3/3-0:1.0 SysFS BusID: 3-0:1.0 Hardware Class: hub Model: "Linux Foundation 1.1 root hub" Hotplug: USB Vendor: usb 0x1d6b "Linux Foundation" Device: usb 0x0001 "1.1 root hub" Revision: "5.16" Serial ID: -- Driver: "hub" Driver Modules: "usbcore" Speed: 12 Mbps Module Alias: "usb:v1D6Bp0001d0516dc09dsc00dp00ic09isc00ip00in00" Driver Info #0: Driver Status: usbcore is active Driver Activation Cmd: "modprobe usbcore" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #20 (USB Controller) 39: USB 00.3: 0000 Unclassified device [Created at usb.122] Unique ID: HHUe.5JL3cWTF+_B Parent ID: k4bc.9T1GDCLyFd9 SysFS ID: /devices/pci0000:00/0000:00:1d.7/usb1/1-5/1-5:1.3 SysFS BusID: 1-5:1.3 Hardware Class: unknown Model: "HP ENVY Photo 6200 series" Hotplug: USB Vendor: usb 0x03f0 "HP" Device: usb 0x1254 "ENVY Photo 6200 series" Revision: "3.14" Serial ID: -- Speed: 480 Mbps Module Alias: "usb:v03F0p1254d0314dc00dsc00dp00icFFisc04ip01in03" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #43 (Hub) 40: USB 00.1: 10900 Printer [Created at usb.122] Unique ID: NwzV.dQjNkqY0Wq7 Parent ID: k4bc.9T1GDCLyFd9 SysFS ID: /devices/pci0000:00/0000:00:1d.7/usb1/1-5/1-5:1.1 SysFS BusID: 1-5:1.1 Hardware Class: printer Model: "HP ENVY Photo 6200 series" Hotplug: USB Vendor: usb 0x03f0 "HP" Device: usb 0x1254 "ENVY Photo 6200 series" Revision: "3.14" Serial ID: -- Driver: "usblp" Driver Modules: "usblp" Speed: 480 Mbps Module Alias: "usb:v03F0p1254d0314dc00dsc00dp00ic07isc01ip02in01" Driver Info #0: Driver Status: usblp is active Driver Activation Cmd: "modprobe usblp" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #43 (Hub) 41: USB 00.0: 10503 USB Mouse [Created at usb.122] Unique ID: hSuP.LWQqMbPr+m8 Parent ID: pBe4.v+N+B0xY+P6 SysFS ID: /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0 SysFS BusID: 2-2:1.0 Hardware Class: mouse Model: "Logitech Cordless Mouse Receiver" Hotplug: USB Vendor: usb 0x046d "Logitech, Inc." Device: usb 0xc50e "Cordless Mouse Receiver" Revision: "25.10" Compatible to: int 0x0210 0x0048 Driver: "usbhid" Driver Modules: "usbhid" Device File: /dev/input/mice (/dev/input/mouse0) Device Files: /dev/input/mice, /dev/input/mouse0, /dev/input/event5, /dev/input/by-path/pci-0000:00:1d.0-usb-0:2:1.0-event-mouse, /dev/input/by-id/usb-Logitech_USB_...-event-mouse, /dev/input/by-path/pci-0000:00:1d.0-usb-0:2:1.0-mouse, /dev/input/by-id/usb-Logitech_USB_...-mouse Device Number: char 13:63 (char 13:32) Speed: 1.5 Mbps Module Alias: "usb:v046DpC50Ed2510dc00dsc00dp00ic03isc01ip02in00" Driver Info #0: Buttons: 8 Wheels: 4 XFree86 Protocol: explorerps/2 GPM Protocol: exps2 Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #48 (Hub) 42: USB 00.0: 10a00 Hub [Created at usb.122] Unique ID: zPk0.RTX9xWW_uz4 Parent ID: mvRC.nJvqmoqa2dE SysFS ID: /devices/pci0000:00/0000:00:1d.2/usb4/4-0:1.0 SysFS BusID: 4-0:1.0 Hardware Class: hub Model: "Linux Foundation 1.1 root hub" Hotplug: USB Vendor: usb 0x1d6b "Linux Foundation" Device: usb 0x0001 "1.1 root hub" Revision: "5.16" Serial ID: -- Driver: "hub" Driver Modules: "usbcore" Speed: 12 Mbps Module Alias: "usb:v1D6Bp0001d0516dc09dsc00dp00ic09isc00ip00in00" Driver Info #0: Driver Status: usbcore is active Driver Activation Cmd: "modprobe usbcore" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #29 (USB Controller) 43: USB 00.0: 10a00 Hub [Created at usb.122] Unique ID: k4bc.9T1GDCLyFd9 Parent ID: 5YuN.J9OW00ZldD4 SysFS ID: /devices/pci0000:00/0000:00:1d.7/usb1/1-0:1.0 SysFS BusID: 1-0:1.0 Hardware Class: hub Model: "Linux Foundation 2.0 root hub" Hotplug: USB Vendor: usb 0x1d6b "Linux Foundation" Device: usb 0x0002 "2.0 root hub" Revision: "5.16" Serial ID: -- Driver: "hub" Driver Modules: "usbcore" Speed: 480 Mbps Module Alias: "usb:v1D6Bp0002d0516dc09dsc00dp00ic09isc00ip00in00" Driver Info #0: Driver Status: usbcore is active Driver Activation Cmd: "modprobe usbcore" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #32 (USB Controller) 45: USB 00.0: 10a00 Hub [Created at usb.122] Unique ID: 2XnU.CCckIHJirFC Parent ID: eEx1.IkraFNyHa+E SysFS ID: /devices/pci0000:00/0000:00:1d.3/usb5/5-0:1.0 SysFS BusID: 5-0:1.0 Hardware Class: hub Model: "Linux Foundation 1.1 root hub" Hotplug: USB Vendor: usb 0x1d6b "Linux Foundation" Device: usb 0x0001 "1.1 root hub" Revision: "5.16" Serial ID: -- Driver: "hub" Driver Modules: "usbcore" Speed: 12 Mbps Module Alias: "usb:v1D6Bp0001d0516dc09dsc00dp00ic09isc00ip00in00" Driver Info #0: Driver Status: usbcore is active Driver Activation Cmd: "modprobe usbcore" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #16 (USB Controller) 47: USB 00.0: 10a00 Hub [Created at usb.122] Unique ID: ADDn.Zr++dp7l7yB Parent ID: k4bc.9T1GDCLyFd9 SysFS ID: /devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1:1.0 SysFS BusID: 1-1:1.0 Hardware Class: hub Model: "Dell Internal 2.0 Hub" Hotplug: USB Vendor: usb 0x413c "Dell Computer Corp." Device: usb 0xa005 "Internal 2.0 Hub" Revision: "50.18" Driver: "hub" Driver Modules: "usbcore" Speed: 480 Mbps Module Alias: "usb:v413CpA005d5018dc09dsc00dp02ic09isc00ip02in00" Driver Info #0: Driver Status: usbcore is active Driver Activation Cmd: "modprobe usbcore" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #43 (Hub) 48: USB 00.0: 10a00 Hub [Created at usb.122] Unique ID: pBe4.v+N+B0xY+P6 Parent ID: 1GTX.lU0LpfbA+rD SysFS ID: /devices/pci0000:00/0000:00:1d.0/usb2/2-0:1.0 SysFS BusID: 2-0:1.0 Hardware Class: hub Model: "Linux Foundation 1.1 root hub" Hotplug: USB Vendor: usb 0x1d6b "Linux Foundation" Device: usb 0x0001 "1.1 root hub" Revision: "5.16" Serial ID: -- Driver: "hub" Driver Modules: "usbcore" Speed: 12 Mbps Module Alias: "usb:v1D6Bp0001d0516dc09dsc00dp00ic09isc00ip00in00" Driver Info #0: Driver Status: usbcore is active Driver Activation Cmd: "modprobe usbcore" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #31 (USB Controller) 50: PS/2 00.0: 10800 Keyboard [Created at input.226] Unique ID: nLyy.+49ps10DtUF Hardware Class: keyboard Model: "AT Translated Set 2 keyboard" Vendor: 0x0001 Device: 0x0001 "AT Translated Set 2 keyboard" Compatible to: int 0x0211 0x0001 Device File: /dev/input/event0 Device Files: /dev/input/event0, /dev/input/by-path/platform-i8042-serio-0-event-kbd Device Number: char 13:64 Driver Info #0: XkbRules: xfree86 XkbModel: pc104 Config Status: cfg=new, avail=yes, need=no, active=unknown 51: PS/2 00.0: 10500 PS/2 Mouse [Created at input.249] Unique ID: AH6Q.ZHI3OT7LsxA Hardware Class: mouse Model: "SynPS/2 Synaptics TouchPad" Vendor: 0x0002 Device: 0x0007 "SynPS/2 Synaptics TouchPad" Compatible to: int 0x0210 0x0002 Device File: /dev/input/mice (/dev/input/mouse1) Device Files: /dev/input/mice, /dev/input/mouse1, /dev/input/event9, /dev/input/by-path/platform-i8042-serio-1-event-mouse, /dev/input/by-path/platform-i8042-serio-1-mouse Device Number: char 13:63 (char 13:33) Driver Info #0: Buttons: 2 Wheels: 0 XFree86 Protocol: explorerps/2 GPM Protocol: exps2 Config Status: cfg=new, avail=yes, need=no, active=unknown 52: None 00.0: 10103 CPU [Created at cpu.462] Unique ID: rdCR.j8NaKXDZtZ6 Hardware Class: cpu Arch: X86-64 Vendor: "GenuineIntel" Model: 6.15.6 "Intel(R) Core(TM)2 CPU T7200 @ 2.00GHz" Features: fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ht,tm,pbe,syscall,nx,lm,constant_tsc,arch_perfmon,pebs,bts,rep_good,nopl,cpuid,aperfmperf,pni,dtes64,monitor,ds_cpl,est,tm2,ssse3,cx16,xtpr,pdcm,lahf_lm,pti,dtherm Clock: 1000 MHz BogoMips: 3994.55 Cache: 4096 kb Units/Processor: 2 Config Status: cfg=new, avail=yes, need=no, active=unknown 53: None 01.0: 10103 CPU [Created at cpu.462] Unique ID: wkFv.j8NaKXDZtZ6 Hardware Class: cpu Arch: X86-64 Vendor: "GenuineIntel" Model: 6.15.6 "Intel(R) Core(TM)2 CPU T7200 @ 2.00GHz" Features: fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ht,tm,pbe,syscall,nx,lm,constant_tsc,arch_perfmon,pebs,bts,rep_good,nopl,cpuid,aperfmperf,pni,dtes64,monitor,ds_cpl,est,tm2,ssse3,cx16,xtpr,pdcm,lahf_lm,pti,dtherm Clock: 1837 MHz BogoMips: 3994.55 Cache: 4096 kb Units/Processor: 2 Config Status: cfg=new, avail=yes, need=no, active=unknown 54: None 00.0: 10701 Ethernet [Created at net.126] Unique ID: RE7Q.ndpeucax6V1 Parent ID: e9JP.R_3Xvz9I_k9 SysFS ID: /class/net/wlp12s0 SysFS Device Link: /devices/pci0000:00/0000:00:1c.1/0000:0c:00.0 Hardware Class: network interface Model: "Ethernet network interface" Driver: "iwl3945" Driver Modules: "iwl3945" Device File: wlp12s0 HW Address: 201D490A54E200EFF77CFCC2FDBD777E Permanent HW Address: 201D490A54E200EFF77CFCC2FDBD777E Link detected: yes Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #12 (WLAN controller) 55: None 00.0: 10700 Loopback [Created at net.126] Unique ID: ZsBS.GQNx7L4uPNA SysFS ID: /class/net/lo Hardware Class: network interface Model: "Loopback network interface" Device File: lo Link detected: yes Config Status: cfg=new, avail=yes, need=no, active=unknown 56: None 00.0: 10701 Ethernet [Created at net.126] Unique ID: usDW.ndpeucax6V1 Parent ID: rBUF.fjPIa6PWQp7 SysFS ID: /class/net/eth0 SysFS Device Link: /devices/pci0000:00/0000:00:1e.0/0000:03:00.0/ssb0:0 Hardware Class: network interface Model: "Ethernet network interface" Driver: "b44" Driver Modules: "b44", "ssb" Device File: eth0 HW Address: C9CC5984C382D16F0E06460D948913DF Permanent HW Address: C9CC5984C382D16F0E06460D948913DF Link detected: no Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #11 (Ethernet controller)