Probe #ccc4dcc6a4 of ASRock ConRoe1333-D667 Desktop Computer
Log: hwinfo
13: PCI 1f.2: 0101 IDE interface (PCI native mode controller, supports both channels switched to ISA compatibility mode, supports bus mastering)
[Created at pci.386]
Unique ID: w7Y8.xyd+qedQTr5
SysFS ID: /devices/pci0000:00/0000:00:1f.2
SysFS BusID: 0000:00:1f.2
Hardware Class: storage
Model: "Intel NM10/ICH7 Family SATA Controller [IDE mode]"
Vendor: pci 0x8086 "Intel Corporation"
Device: pci 0x27c0 "NM10/ICH7 Family SATA Controller [IDE mode]"
SubVendor: pci 0x1849 "ASRock Incorporation"
SubDevice: pci 0x27c0
Revision: 0x01
Driver: "ata_piix"
Driver Modules: "ata_piix"
I/O Ports: 0xc080-0xc087 (rw)
I/O Ports: 0xc000-0xc003 (rw)
I/O Ports: 0xbc00-0xbc07 (rw)
I/O Ports: 0xb880-0xb883 (rw)
I/O Ports: 0xb800-0xb80f (rw)
IRQ: 19 (94493 events)
Module Alias: "pci:v00008086d000027C0sv00001849sd000027C0bc01sc01i8F"
Driver Info #0:
Driver Status: ata_piix is active
Driver Activation Cmd: "modprobe ata_piix"
Driver Info #1:
Driver Status: ata_generic is active
Driver Activation Cmd: "modprobe ata_generic"
Config Status: cfg=new, avail=yes, need=no, active=unknown
14: PCI 1c.0: 0604 PCI bridge (Normal decode)
[Created at pci.386]
Unique ID: z8Q3.qgQLzt34+v9
SysFS ID: /devices/pci0000:00/0000:00:1c.0
SysFS BusID: 0000:00:1c.0
Hardware Class: bridge
Model: "Intel NM10/ICH7 Family PCI Express Port 1"
Vendor: pci 0x8086 "Intel Corporation"
Device: pci 0x27d0 "NM10/ICH7 Family PCI Express Port 1"
SubVendor: pci 0x1849 "ASRock Incorporation"
SubDevice: pci 0x27d0
Revision: 0x01
Driver: "pcieport"
IRQ: 16 (4868 events)
Module Alias: "pci:v00008086d000027D0sv00001849sd000027D0bc06sc04i00"
Config Status: cfg=new, avail=yes, need=no, active=unknown
15: PCI 1d.3: 0c03 USB Controller (UHCI)
[Created at pci.386]
Unique ID: eEx1.FDfDOFR2w+7
SysFS ID: /devices/pci0000:00/0000:00:1d.3
SysFS BusID: 0000:00:1d.3
Hardware Class: usb controller
Model: "Intel NM10/ICH7 Family USB UHCI Controller #4"
Vendor: pci 0x8086 "Intel Corporation"
Device: pci 0x27cb "NM10/ICH7 Family USB UHCI Controller #4"
SubVendor: pci 0x1849 "ASRock Incorporation"
SubDevice: pci 0x27cb
Revision: 0x01
Driver: "uhci_hcd"
Driver Modules: "uhci_hcd"
I/O Ports: 0xc880-0xc89f (rw)
IRQ: 16 (4868 events)
Module Alias: "pci:v00008086d000027CBsv00001849sd000027CBbc0Csc03i00"
Driver Info #0:
Driver Status: uhci-hcd is active
Driver Activation Cmd: "modprobe uhci-hcd"
Config Status: cfg=new, avail=yes, need=no, active=unknown
16: PCI 1f.0: 0601 ISA bridge
[Created at pci.386]
Unique ID: BUZT.XHLukS9VAn4
SysFS ID: /devices/pci0000:00/0000:00:1f.0
SysFS BusID: 0000:00:1f.0
Hardware Class: bridge
Model: "Intel 82801GB/GR (ICH7 Family) LPC Interface Bridge"
Vendor: pci 0x8086 "Intel Corporation"
Device: pci 0x27b8 "82801GB/GR (ICH7 Family) LPC Interface Bridge"
SubVendor: pci 0x1849 "ASRock Incorporation"
SubDevice: pci 0x27b8
Revision: 0x01
Driver: "lpc_ich"
Driver Modules: "lpc_ich"
Module Alias: "pci:v00008086d000027B8sv00001849sd000027B8bc06sc01i00"
Driver Info #0:
Driver Status: intel_rng is not active
Driver Activation Cmd: "modprobe intel_rng"
Driver Info #1:
Driver Status: lpc_ich is active
Driver Activation Cmd: "modprobe lpc_ich"
Driver Info #2:
Driver Status: leds_ss4200 is not active
Driver Activation Cmd: "modprobe leds_ss4200"
Config Status: cfg=new, avail=yes, need=no, active=unknown
17: PCI 1d.1: 0c03 USB Controller (UHCI)
[Created at pci.386]
Unique ID: vayM.B9bsDSEG610
SysFS ID: /devices/pci0000:00/0000:00:1d.1
SysFS BusID: 0000:00:1d.1
Hardware Class: usb controller
Model: "Intel NM10/ICH7 Family USB UHCI Controller #2"
Vendor: pci 0x8086 "Intel Corporation"
Device: pci 0x27c9 "NM10/ICH7 Family USB UHCI Controller #2"
SubVendor: pci 0x1849 "ASRock Incorporation"
SubDevice: pci 0x27c9
Revision: 0x01
Driver: "uhci_hcd"
Driver Modules: "uhci_hcd"
I/O Ports: 0xc480-0xc49f (rw)
IRQ: 19 (94493 events)
Module Alias: "pci:v00008086d000027C9sv00001849sd000027C9bc0Csc03i00"
Driver Info #0:
Driver Status: uhci-hcd is active
Driver Activation Cmd: "modprobe uhci-hcd"
Config Status: cfg=new, avail=yes, need=no, active=unknown
18: PCI 100.0: 0200 Ethernet controller
[Created at pci.386]
Unique ID: rBUF.2DaE74MhIn9
Parent ID: qTvu.ukUi7hGsou1
SysFS ID: /devices/pci0000:00/0000:00:1c.1/0000:01:00.0
SysFS BusID: 0000:01:00.0
Hardware Class: network
Model: "Realtek RTL810xE PCI Express Fast Ethernet controller"
Vendor: pci 0x10ec "Realtek Semiconductor Co., Ltd."
Device: pci 0x8136 "RTL810xE PCI Express Fast Ethernet controller"
SubVendor: pci 0x1849 "ASRock Incorporation"
SubDevice: pci 0x8136
Revision: 0x01
Driver: "r8169"
Driver Modules: "r8169"
Device File: eth0
I/O Ports: 0xd800-0xd8ff (rw)
Memory Range: 0xfeaff000-0xfeafffff (rw,non-prefetchable)
Memory Range: 0xfeac0000-0xfeadffff (ro,non-prefetchable,disabled)
IRQ: 17 (18025 events)
HW Address: ...
Permanent HW Address: ...
Link detected: yes
Module Alias: "pci:v000010ECd00008136sv00001849sd00008136bc02sc00i00"
Driver Info #0:
Driver Status: r8169 is active
Driver Activation Cmd: "modprobe r8169"
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #24 (PCI bridge)
19: PCI 1b.0: 0403 Audio device
[Created at pci.386]
Unique ID: u1Nb.QlMbNkS5XgE
SysFS ID: /devices/pci0000:00/0000:00:1b.0
SysFS BusID: 0000:00:1b.0
Hardware Class: sound
Model: "Intel NM10/ICH7 Family High Definition Audio Controller"
Vendor: pci 0x8086 "Intel Corporation"
Device: pci 0x27d8 "NM10/ICH7 Family High Definition Audio Controller"
SubVendor: pci 0x1849 "ASRock Incorporation"
SubDevice: pci 0x0888
Revision: 0x01
Driver: "snd_hda_intel"
Driver Modules: "snd_hda_intel"
Memory Range: 0xfe938000-0xfe93bfff (rw,non-prefetchable)
IRQ: 16 (4868 events)
Module Alias: "pci:v00008086d000027D8sv00001849sd00000888bc04sc03i00"
Driver Info #0:
Driver Status: snd_hda_intel is active
Driver Activation Cmd: "modprobe snd_hda_intel"
Config Status: cfg=new, avail=yes, need=no, active=unknown
20: PCI 302.0: 0200 Ethernet controller
[Created at pci.386]
Unique ID: JNkJ.Ii5T7g93SOE
Parent ID: 6NW+.RlqjBL7v2IB
SysFS ID: /devices/pci0000:00/0000:00:1e.0/0000:03:02.0
SysFS BusID: 0000:03:02.0
Hardware Class: network
Model: "Standard Microsystems Corp [SMC] EtherPower II 10/100"
Vendor: pci 0x10b8 "Standard Microsystems Corp [SMC]"
Device: pci 0x0005 "83c170 EPIC/100 Fast Ethernet Adapter"
SubVendor: pci 0x10b8 "Standard Microsystems Corp [SMC]"
SubDevice: pci 0xa011 "EtherPower II 10/100"
Revision: 0x06
Driver: "epic100"
Driver Modules: "epic100"
Device File: eth1
I/O Ports: 0xe800-0xe8ff (rw)
Memory Range: 0xfebff000-0xfebfffff (rw,non-prefetchable)
Memory Range: 0xfebe0000-0xfebeffff (ro,non-prefetchable,disabled)
IRQ: 23 (2 events)
HW Address: ...
Permanent HW Address: ...
Link detected: yes
Module Alias: "pci:v000010B8d00000005sv000010B8sd0000A011bc02sc00i00"
Driver Info #0:
Driver Status: epic100 is active
Driver Activation Cmd: "modprobe epic100"
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #21 (PCI bridge)
21: PCI 1e.0: 0604 PCI bridge (Subtractive decode)
[Created at pci.386]
Unique ID: 6NW+.RlqjBL7v2IB
SysFS ID: /devices/pci0000:00/0000:00:1e.0
SysFS BusID: 0000:00:1e.0
Hardware Class: bridge
Model: "Intel 82801 PCI Bridge"
Vendor: pci 0x8086 "Intel Corporation"
Device: pci 0x244e "82801 PCI Bridge"
SubVendor: pci 0x1849 "ASRock Incorporation"
SubDevice: pci 0x244e
Revision: 0xe1
Module Alias: "pci:v00008086d0000244Esv00001849sd0000244Ebc06sc04i01"
Config Status: cfg=new, avail=yes, need=no, active=unknown
22: PCI 1f.3: 0c05 SMBus
[Created at pci.386]
Unique ID: nS1_.l6WLdgpPgnC
SysFS ID: /devices/pci0000:00/0000:00:1f.3
SysFS BusID: 0000:00:1f.3
Hardware Class: unknown
Model: "Intel NM10/ICH7 Family SMBus Controller"
Vendor: pci 0x8086 "Intel Corporation"
Device: pci 0x27da "NM10/ICH7 Family SMBus Controller"
SubVendor: pci 0x1849 "ASRock Incorporation"
SubDevice: pci 0x27da
Revision: 0x01
Driver: "i801_smbus"
Driver Modules: "i2c_i801"
I/O Ports: 0x400-0x41f (rw)
IRQ: 19 (94493 events)
Module Alias: "pci:v00008086d000027DAsv00001849sd000027DAbc0Csc05i00"
Driver Info #0:
Driver Status: i2c_i801 is active
Driver Activation Cmd: "modprobe i2c_i801"
Config Status: cfg=new, avail=yes, need=no, active=unknown
23: PCI 00.0: 0600 Host bridge
[Created at pci.386]
Unique ID: qLht.Hc_HihGacL2
SysFS ID: /devices/pci0000:00/0000:00:00.0
SysFS BusID: 0000:00:00.0
Hardware Class: bridge
Model: "ASRock In ConRoe1333-D667"
Vendor: pci 0x8086 "Intel Corporation"
Device: pci 0x2770 "82945G/GZ/P/PL Memory Controller Hub"
SubVendor: pci 0x1849 "ASRock Incorporation"
SubDevice: pci 0x2770 "ConRoe1333-D667"
Revision: 0x02
Module Alias: "pci:v00008086d00002770sv00001849sd00002770bc06sc00i00"
Config Status: cfg=new, avail=yes, need=no, active=unknown
24: PCI 1c.1: 0604 PCI bridge (Normal decode)
[Created at pci.386]
Unique ID: qTvu.ukUi7hGsou1
SysFS ID: /devices/pci0000:00/0000:00:1c.1
SysFS BusID: 0000:00:1c.1
Hardware Class: bridge
Model: "Intel NM10/ICH7 Family PCI Express Port 2"
Vendor: pci 0x8086 "Intel Corporation"
Device: pci 0x27d2 "NM10/ICH7 Family PCI Express Port 2"
SubVendor: pci 0x1849 "ASRock Incorporation"
SubDevice: pci 0x27d2
Revision: 0x01
Driver: "pcieport"
IRQ: 17 (18025 events)
Module Alias: "pci:v00008086d000027D2sv00001849sd000027D2bc06sc04i00"
Config Status: cfg=new, avail=yes, need=no, active=unknown
25: PCI 1f.1: 0101 IDE interface (ISA Compatibility mode controller, supports both channels switched to PCI native mode, supports bus mastering)
[Created at pci.386]
Unique ID: 3p2J.q+IlYYXyZe8
SysFS ID: /devices/pci0000:00/0000:00:1f.1
SysFS BusID: 0000:00:1f.1
Hardware Class: storage
Model: "Intel 82801G (ICH7 Family) IDE Controller"
Vendor: pci 0x8086 "Intel Corporation"
Device: pci 0x27df "82801G (ICH7 Family) IDE Controller"
SubVendor: pci 0x1849 "ASRock Incorporation"
SubDevice: pci 0x27df
Revision: 0x01
Driver: "ata_piix"
Driver Modules: "ata_piix"
I/O Ports: 0x1f0-0x1f7 (rw)
I/O Port: 0x3f6 (rw)
I/O Ports: 0x170-0x177 (rw)
I/O Port: 0x376 (rw)
I/O Ports: 0xffa0-0xffaf (rw)
IRQ: 18 (no events)
Module Alias: "pci:v00008086d000027DFsv00001849sd000027DFbc01sc01i8A"
Driver Info #0:
Driver Status: ata_piix is active
Driver Activation Cmd: "modprobe ata_piix"
Driver Info #1:
Driver Status: ata_generic is active
Driver Activation Cmd: "modprobe ata_generic"
Config Status: cfg=new, avail=yes, need=no, active=unknown
26: PCI 1d.2: 0c03 USB Controller (UHCI)
[Created at pci.386]
Unique ID: mvRC.DB72prK9W04
SysFS ID: /devices/pci0000:00/0000:00:1d.2
SysFS BusID: 0000:00:1d.2
Hardware Class: usb controller
Model: "Intel NM10/ICH7 Family USB UHCI Controller #3"
Vendor: pci 0x8086 "Intel Corporation"
Device: pci 0x27ca "NM10/ICH7 Family USB UHCI Controller #3"
SubVendor: pci 0x1849 "ASRock Incorporation"
SubDevice: pci 0x27ca
Revision: 0x01
Driver: "uhci_hcd"
Driver Modules: "uhci_hcd"
I/O Ports: 0xc800-0xc81f (rw)
IRQ: 18 (no events)
Module Alias: "pci:v00008086d000027CAsv00001849sd000027CAbc0Csc03i00"
Driver Info #0:
Driver Status: uhci-hcd is active
Driver Activation Cmd: "modprobe uhci-hcd"
Config Status: cfg=new, avail=yes, need=no, active=unknown
27: PCI 1d.0: 0c03 USB Controller (UHCI)
[Created at pci.386]
Unique ID: 1GTX.973he28Ni1C
SysFS ID: /devices/pci0000:00/0000:00:1d.0
SysFS BusID: 0000:00:1d.0
Hardware Class: usb controller
Model: "Intel NM10/ICH7 Family USB UHCI Controller #1"
Vendor: pci 0x8086 "Intel Corporation"
Device: pci 0x27c8 "NM10/ICH7 Family USB UHCI Controller #1"
SubVendor: pci 0x1849 "ASRock Incorporation"
SubDevice: pci 0x27c8
Revision: 0x01
Driver: "uhci_hcd"
Driver Modules: "uhci_hcd"
I/O Ports: 0xc400-0xc41f (rw)
IRQ: 23 (2 events)
Module Alias: "pci:v00008086d000027C8sv00001849sd000027C8bc0Csc03i00"
Driver Info #0:
Driver Status: uhci-hcd is active
Driver Activation Cmd: "modprobe uhci-hcd"
Config Status: cfg=new, avail=yes, need=no, active=unknown
28: PCI 02.0: 0300 VGA compatible controller (VGA)
[Created at pci.386]
Unique ID: _Znp.IDOvJgnc5l5
SysFS ID: /devices/pci0000:00/0000:00:02.0
SysFS BusID: 0000:00:02.0
Hardware Class: graphics card
Model: "ASRock In ConRoe1333-D667"
Vendor: pci 0x8086 "Intel Corporation"
Device: pci 0x2772 "945G"
SubVendor: pci 0x1849 "ASRock Incorporation"
SubDevice: pci 0x2772 "ConRoe1333-D667"
Revision: 0x02
Driver: "i915"
Driver Modules: "i915"
Memory Range: 0xfe980000-0xfe9fffff (rw,non-prefetchable)
I/O Ports: 0xcc00-0xcc07 (rw)
Memory Range: 0xd0000000-0xdfffffff (ro,non-prefetchable)
Memory Range: 0xfe940000-0xfe97ffff (rw,non-prefetchable)
Memory Range: 0x000c0000-0x000dffff (rw,non-prefetchable,disabled)
IRQ: 16 (4868 events)
I/O Ports: 0x3c0-0x3df (rw)
Module Alias: "pci:v00008086d00002772sv00001849sd00002772bc03sc00i00"
Driver Info #0:
XFree86 v4 Server Module: intel
Driver Info #1:
XFree86 v4 Server Module: intel
3D Support: yes
Extensions: dri
Config Status: cfg=new, avail=yes, need=no, active=unknown
29: PCI 1d.7: 0c03 USB Controller (EHCI)
[Created at pci.386]
Unique ID: 5YuN.nFnaFj0irq0
SysFS ID: /devices/pci0000:00/0000:00:1d.7
SysFS BusID: 0000:00:1d.7
Hardware Class: usb controller
Model: "Intel NM10/ICH7 Family USB2 EHCI Controller"
Vendor: pci 0x8086 "Intel Corporation"
Device: pci 0x27cc "NM10/ICH7 Family USB2 EHCI Controller"
SubVendor: pci 0x1849 "ASRock Incorporation"
SubDevice: pci 0x27cc
Revision: 0x01
Driver: "ehci-pci"
Driver Modules: "ehci_pci"
Memory Range: 0xfe937c00-0xfe937fff (rw,non-prefetchable)
IRQ: 23 (2 events)
Module Alias: "pci:v00008086d000027CCsv00001849sd000027CCbc0Csc03i20"
Driver Info #0:
Driver Status: ehci-hcd is active
Driver Activation Cmd: "modprobe ehci-hcd"
Driver Info #1:
Driver Status: ehci_pci is active
Driver Activation Cmd: "modprobe ehci_pci"
Config Status: cfg=new, avail=yes, need=no, active=unknown
30: None 00.0: 10000 Monitor
[Created at monitor.125]
Unique ID: rdCR.tEbIelXsGw1
Parent ID: _Znp.IDOvJgnc5l5
Hardware Class: monitor
Model: "SAMSUNG SME1920W"
Vendor: SAM "SAMSUNG"
Device: eisa 0x06bd "SME1920W"
Serial ID: --
Resolution: 720x400@70Hz
Resolution: 640x480@60Hz
Resolution: 640x480@67Hz
Resolution: 640x480@72Hz
Resolution: 640x480@75Hz
Resolution: 800x600@56Hz
Resolution: 800x600@60Hz
Resolution: 800x600@72Hz
Resolution: 800x600@75Hz
Resolution: 832x624@75Hz
Resolution: 1024x768@60Hz
Resolution: 1024x768@70Hz
Resolution: 1024x768@75Hz
Resolution: 1280x1024@75Hz
Resolution: 1280x1024@60Hz
Resolution: 1280x960@60Hz
Resolution: 1440x900@60Hz
Size: 408x255 mm
Year of Manufacture: 2010
Week of Manufacture: 39
Detailed Timings #0:
Resolution: 1440x900
Horizontal: 1440 1520 1672 1904 (+80 +232 +464) +hsync
Vertical: 900 903 909 934 (+3 +9 +34) -vsync
Frequencies: 106.50 MHz, 55.93 kHz, 59.89 Hz
Driver Info #0:
Max. Resolution: 1280x1024
Vert. Sync Range: 56-75 Hz
Hor. Sync Range: 30-81 kHz
Bandwidth: 106 MHz
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #28 (VGA compatible controller)
32: IDE 201.0: 10600 Disk
[Created at block.245]
Unique ID: WZeP.cVHa7uUgE+1
Parent ID: w7Y8.xyd+qedQTr5
SysFS ID: /class/block/sdb
SysFS BusID: 2:0:1:0
SysFS Device Link: /devices/pci0000:00/0000:00:1f.2/ata3/host2/target2:0:1/2:0:1:0
Hardware Class: disk
Model: "WDC WD10EZEX-22B"
Vendor: "WDC"
Device: "WD10EZEX-22B"
Revision: "1A01"
Serial ID: --
Driver: "ata_piix", "sd"
Driver Modules: "ata_piix", "sd_mod"
Device File: /dev/sdb
Device Number: block 8:16-8:31
Geometry (Logical): CHS 121601/255/63
Size: 1953525168 sectors a 512 bytes
Capacity: 931 GB (1000204886016 bytes)
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #13 (IDE interface)
33: SCSI 300.0: 10602 CD-ROM (DVD)
[Created at block.249]
Unique ID: KD9E.o4kdnfAcDp0
Parent ID: w7Y8.xyd+qedQTr5
SysFS ID: /class/block/sr0
SysFS BusID: 3:0:0:0
SysFS Device Link: /devices/pci0000:00/0000:00:1f.2/ata4/host3/target3:0:0/3:0:0:0
Hardware Class: cdrom
Model: "TSSTcorp CDDVDW SH-S203N"
Vendor: "TSSTcorp"
Device: "CDDVDW SH-S203N"
Revision: "SB02"
Driver: "ata_piix", "sr"
Driver Modules: "ata_piix", "sr_mod"
Device File: /dev/sr0 (/dev/sg2)
Device Number: block 11:0 (char 21:2)
Features: CD-R, CD-RW, DVD, DVD-R, DVD-RW, DVD-R DL, DVD+R, DVD+RW, DVD+R DL, DVD-RAM, MRW, MRW-W
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #13 (IDE interface)
Drive Speed: 40
34: None 00.0: 10600 Disk
[Created at block.245]
Unique ID: kwWm.Fxp0d3BezAE
SysFS ID: /class/block/fd0
SysFS BusID: floppy.0
SysFS Device Link: /devices/platform/floppy.0
Hardware Class: disk
Model: "Disk"
Driver: "floppy"
Driver Modules: "floppy"
Device File: /dev/fd0
Device Number: block 2:0
Size: 8 sectors a 512 bytes
Capacity: 0 GB (4096 bytes)
Drive status: no medium
Config Status: cfg=new, avail=yes, need=no, active=unknown
35: IDE 200.0: 10600 Disk
[Created at block.245]
Unique ID: 3OOL.6T30tnQETj0
Parent ID: w7Y8.xyd+qedQTr5
SysFS ID: /class/block/sda
SysFS BusID: 2:0:0:0
SysFS Device Link: /devices/pci0000:00/0000:00:1f.2/ata3/host2/target2:0:0/2:0:0:0
Hardware Class: disk
Model: "SAMSUNG SP1603C"
Vendor: "SAMSUNG"
Device: "SP1603C"
Revision: "0-50"
Serial ID: --
Driver: "ata_piix", "sd"
Driver Modules: "ata_piix", "sd_mod"
Device File: /dev/sda
Device Number: block 8:0-8:15
Geometry (Logical): CHS 19457/255/63
Size: 312581808 sectors a 512 bytes
Capacity: 149 GB (160041885696 bytes)
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #13 (IDE interface)
36: USB 00.0: 10a00 Hub
[Created at usb.122]
Unique ID: uIhY.gkSaZmjGyhD
Parent ID: vayM.B9bsDSEG610
SysFS ID: /devices/pci0000:00/0000:00:1d.1/usb3/3-0:1.0
SysFS BusID: 3-0:1.0
Hardware Class: hub
Model: "Linux Foundation 1.1 root hub"
Hotplug: USB
Vendor: usb 0x1d6b "Linux Foundation"
Device: usb 0x0001 "1.1 root hub"
Revision: "5.10"
Serial ID: --
Driver: "hub"
Driver Modules: "usbcore"
Speed: 12 Mbps
Module Alias: "usb:v1D6Bp0001d0510dc09dsc00dp00ic09isc00ip00in00"
Driver Info #0:
Driver Status: usbcore is active
Driver Activation Cmd: "modprobe usbcore"
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #17 (USB Controller)
37: USB 00.0: 10503 USB Mouse
[Created at usb.122]
Unique ID: KRJj.i5ZZfwphjy1
Parent ID: uIhY.gkSaZmjGyhD
SysFS ID: /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0
SysFS BusID: 3-1:1.0
Hardware Class: mouse
Model: "Logitech M105 Optical Mouse"
Hotplug: USB
Vendor: usb 0x046d "Logitech, Inc."
Device: usb 0xc077 "M105 Optical Mouse"
Revision: "72.00"
Compatible to: int 0x0210 0x0023
Driver: "usbhid"
Driver Modules: "usbhid"
Device File: /dev/input/mice (/dev/input/mouse0)
Device Files: /dev/input/mice, /dev/input/mouse0, /dev/input/event3
Device Number: char 13:63 (char 13:32)
Speed: 1.5 Mbps
Module Alias: "usb:v046DpC077d7200dc00dsc00dp00ic03isc01ip02in00"
Driver Info #0:
Buttons: 3
Wheels: 2
XFree86 Protocol: explorerps/2
GPM Protocol: exps2
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #36 (Hub)
38: USB 00.0: 10a00 Hub
[Created at usb.122]
Unique ID: zPk0.RTX9xWW_uz4
Parent ID: mvRC.DB72prK9W04
SysFS ID: /devices/pci0000:00/0000:00:1d.2/usb4/4-0:1.0
SysFS BusID: 4-0:1.0
Hardware Class: hub
Model: "Linux Foundation 1.1 root hub"
Hotplug: USB
Vendor: usb 0x1d6b "Linux Foundation"
Device: usb 0x0001 "1.1 root hub"
Revision: "5.10"
Serial ID: --
Driver: "hub"
Driver Modules: "usbcore"
Speed: 12 Mbps
Module Alias: "usb:v1D6Bp0001d0510dc09dsc00dp00ic09isc00ip00in00"
Driver Info #0:
Driver Status: usbcore is active
Driver Activation Cmd: "modprobe usbcore"
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #26 (USB Controller)
39: USB 00.0: 10a00 Hub
[Created at usb.122]
Unique ID: k4bc.9T1GDCLyFd9
Parent ID: 5YuN.nFnaFj0irq0
SysFS ID: /devices/pci0000:00/0000:00:1d.7/usb1/1-0:1.0
SysFS BusID: 1-0:1.0
Hardware Class: hub
Model: "Linux Foundation 2.0 root hub"
Hotplug: USB
Vendor: usb 0x1d6b "Linux Foundation"
Device: usb 0x0002 "2.0 root hub"
Revision: "5.10"
Serial ID: --
Driver: "hub"
Driver Modules: "usbcore"
Speed: 480 Mbps
Module Alias: "usb:v1D6Bp0002d0510dc09dsc00dp00ic09isc00ip00in00"
Driver Info #0:
Driver Status: usbcore is active
Driver Activation Cmd: "modprobe usbcore"
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #29 (USB Controller)
40: USB 00.0: 10a00 Hub
[Created at usb.122]
Unique ID: 2XnU.CCckIHJirFC
Parent ID: eEx1.FDfDOFR2w+7
SysFS ID: /devices/pci0000:00/0000:00:1d.3/usb5/5-0:1.0
SysFS BusID: 5-0:1.0
Hardware Class: hub
Model: "Linux Foundation 1.1 root hub"
Hotplug: USB
Vendor: usb 0x1d6b "Linux Foundation"
Device: usb 0x0001 "1.1 root hub"
Revision: "5.10"
Serial ID: --
Driver: "hub"
Driver Modules: "usbcore"
Speed: 12 Mbps
Module Alias: "usb:v1D6Bp0001d0510dc09dsc00dp00ic09isc00ip00in00"
Driver Info #0:
Driver Status: usbcore is active
Driver Activation Cmd: "modprobe usbcore"
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #15 (USB Controller)
41: USB 00.0: 10a00 Hub
[Created at usb.122]
Unique ID: pBe4.v+N+B0xY+P6
Parent ID: 1GTX.973he28Ni1C
SysFS ID: /devices/pci0000:00/0000:00:1d.0/usb2/2-0:1.0
SysFS BusID: 2-0:1.0
Hardware Class: hub
Model: "Linux Foundation 1.1 root hub"
Hotplug: USB
Vendor: usb 0x1d6b "Linux Foundation"
Device: usb 0x0001 "1.1 root hub"
Revision: "5.10"
Serial ID: --
Driver: "hub"
Driver Modules: "usbcore"
Speed: 12 Mbps
Module Alias: "usb:v1D6Bp0001d0510dc09dsc00dp00ic09isc00ip00in00"
Driver Info #0:
Driver Status: usbcore is active
Driver Activation Cmd: "modprobe usbcore"
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #27 (USB Controller)
42: PS/2 00.0: 10800 Keyboard
[Created at input.226]
Unique ID: nLyy.+49ps10DtUF
Hardware Class: keyboard
Model: "AT Translated Set 2 keyboard"
Vendor: 0x0001
Device: 0x0001 "AT Translated Set 2 keyboard"
Compatible to: int 0x0211 0x0001
Device File: /dev/input/event0
Device Number: char 13:64
Driver Info #0:
XkbRules: xfree86
XkbModel: pc104
Config Status: cfg=new, avail=yes, need=no, active=unknown
43: None 00.0: 10103 CPU
[Created at cpu.465]
Unique ID: rdCR.j8NaKXDZtZ6
Hardware Class: cpu
Arch: X86-64
Vendor: "GenuineIntel"
Model: 6.15.13 "Intel(R) Pentium(R) Dual CPU E2140 @ 1.60GHz"
Features: fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ht,tm,pbe,syscall,nx,lm,constant_tsc,arch_perfmon,pebs,bts,rep_good,nopl,cpuid,aperfmperf,pni,dtes64,monitor,ds_cpl,est,tm2,ssse3,cx16,xtpr,pdcm,lahf_lm,pti,dtherm
Clock: 1197 MHz
BogoMips: 3192.37
Cache: 1024 kb
Units/Processor: 2
Config Status: cfg=new, avail=yes, need=no, active=unknown
44: None 01.0: 10103 CPU
[Created at cpu.465]
Unique ID: wkFv.j8NaKXDZtZ6
Hardware Class: cpu
Arch: X86-64
Vendor: "GenuineIntel"
Model: 6.15.13 "Intel(R) Pentium(R) Dual CPU E2140 @ 1.60GHz"
Features: fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ht,tm,pbe,syscall,nx,lm,constant_tsc,arch_perfmon,pebs,bts,rep_good,nopl,cpuid,aperfmperf,pni,dtes64,monitor,ds_cpl,est,tm2,ssse3,cx16,xtpr,pdcm,lahf_lm,pti,dtherm
Clock: 1197 MHz
BogoMips: 3192.37
Cache: 1024 kb
Units/Processor: 2
Config Status: cfg=new, avail=yes, need=no, active=unknown
45: None 01.0: 10701 Ethernet
[Created at net.126]
Unique ID: L2Ua.ndpeucax6V1
Parent ID: JNkJ.Ii5T7g93SOE
SysFS ID: /class/net/eth1
SysFS Device Link: /devices/pci0000:00/0000:00:1e.0/0000:03:02.0
Hardware Class: network interface
Model: "Ethernet network interface"
Driver: "epic100"
Driver Modules: "epic100"
Device File: eth1
HW Address: ...
Permanent HW Address: ...
Link detected: yes
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #20 (Ethernet controller)
46: None 00.0: 10700 Loopback
[Created at net.126]
Unique ID: ZsBS.GQNx7L4uPNA
SysFS ID: /class/net/lo
Hardware Class: network interface
Model: "Loopback network interface"
Device File: lo
Link detected: yes
Config Status: cfg=new, avail=yes, need=no, active=unknown
47: None 00.0: 10701 Ethernet
[Created at net.126]
Unique ID: usDW.ndpeucax6V1
Parent ID: rBUF.2DaE74MhIn9
SysFS ID: /class/net/eth0
SysFS Device Link: /devices/pci0000:00/0000:00:1c.1/0000:01:00.0
Hardware Class: network interface
Model: "Ethernet network interface"
Driver: "r8169"
Driver Modules: "r8169"
Device File: eth0
HW Address: ...
Permanent HW Address: ...
Link detected: yes
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #18 (Ethernet controller)