Probe #1ad8a2f766 of Lenovo ThinkPad R61 8918DEG
Log: dmesg.1
[ 0.000000] microcode: microcode updated early to revision 0x60f, date = 2010-09-29
[ 0.000000] Linux version 5.15.0-56-generic (XXX@XXX) (gcc (Ubuntu 11.3.0-1ubuntu1~22.04) 11.3.0, GNU ld (GNU Binutils for Ubuntu) 2.38) #62-Ubuntu SMP Tue Nov 22 19:54:14 UTC 2022 (Ubuntu 5.15.0-56.62-generic 5.15.64)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.15.0-56-generic root=UUID=HASH_588-DBF4-4CCD-941A-2CFA371230BA ro quiet splash vt.handoff=7
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Hygon HygonGenuine
[ 0.000000] Centaur CentaurHauls
[ 0.000000] zhaoxin Shanghai
[ 0.000000] x86/fpu: x87 FPU will use FXSAVE
[ 0.000000] signal: max sigframe size: 1440
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000d2000-0x00000000000d3fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bfeaffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bfeb0000-0x00000000bfecbfff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000bfecc000-0x00000000bfefffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bff00000-0x00000000bfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed003ff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed14000-0x00000000fed19fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed8ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.4 present.
[ 0.000000] DMI: LENOVO 8918DEG/8918DEG, BIOS 7KETC9WW (2.29 ) 04/07/2010
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2094.807 MHz processor
[ 0.004614] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.004619] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.004630] last_pfn = 0x140000 max_arch_pfn = 0x400000000
[ 0.005479] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.006030] total RAM covered: 4095M
[ 0.006276] Found optimal setting for mtrr clean up
[ 0.006277] gran_size: 64K chunk_size: 2M num_reg: 4 lose cover RAM: 0G
[ 0.007231] e820: update [mem 0xbff00000-0xffffffff] usable ==> reserved
[ 0.007244] last_pfn = 0xbfeb0 max_arch_pfn = 0x400000000
[ 0.016534] found SMP MP-table at [mem 0x000f69e0-0x000f69ef] RAMDISK: [mem 0x2b36f000-0x319aefff] ACPI: Early table checksum verification disabled
[ 0.016946] ACPI: RSDP 0x00000000000F69B0 000024 (v02 LENOVO)
[ 0.016953] ACPI: XSDT 0x00000000BFEBB27E 00008C (v01 LENOVO TP-7K 00002290 LTP 00000000)
[ 0.016962] ACPI: FACP 0x00000000BFEBB400 0000F4 (v03 LENOVO TP-7K 00002290 LNVO 00000001)
[ 0.016969] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 64/32 (20210730/tbfadt-564)
[ 0.016974] ACPI BIOS Warning (bug): Optional FADT field Gpe1Block has valid Address but zero Length: 0x000000000000102C/0x0 (20210730/tbfadt-615)
[ 0.016981] ACPI: DSDT 0x00000000BFEBB81D 01044C (v01 LENOVO TP-7K 00002290 MSFT 03000000)
[ 0.016987] ACPI: FACS 0x00000000BFEE4000 000040
[ 0.016992] ACPI: FACS 0x00000000BFEE4000 000040
[ 0.016997] ACPI: SSDT 0x00000000BFEBB5B4 000269 (v01 LENOVO TP-7K 00002290 MSFT 03000000)
[ 0.017003] ACPI: ECDT 0x00000000BFECBC69 000052 (v01 LENOVO TP-7K 00002290 LNVO 00000001)
[ 0.017008] ACPI: TCPA 0x00000000BFECBCBB 000032 (v02 LENOVO TP-7K 00002290 LNVO 00000001)
[ 0.017014] ACPI: APIC 0x00000000BFECBCED 000068 (v01 LENOVO TP-7K 00002290 LNVO 00000001)
[ 0.017019] ACPI: MCFG 0x00000000BFECBD55 00003C (v01 LENOVO TP-7K 00002290 LNVO 00000001)
[ 0.017025] ACPI: HPET 0x00000000BFECBD91 000038 (v01 LENOVO TP-7K 00002290 LNVO 00000001)
[ 0.017031] ACPI: SLIC 0x00000000BFECBE62 000176 (v01 LENOVO TP-7K 00002290 LTP 00000000)
[ 0.017036] ACPI: BOOT 0x00000000BFECBFD8 000028 (v01 LENOVO TP-7K 00002290 LTP 00000001)
[ 0.017042] ACPI: SSDT 0x00000000BFEE26D9 00025F (v01 LENOVO TP-7K 00002290 INTL 20050513)
[ 0.017048] ACPI: SSDT 0x00000000BFEE2938 0000A6 (v01 LENOVO TP-7K 00002290 INTL 20050513)
[ 0.017053] ACPI: SSDT 0x00000000BFEE29DE 0004F7 (v01 LENOVO TP-7K 00002290 INTL 20050513)
[ 0.017059] ACPI: SSDT 0x00000000BFEE2ED5 0001D8 (v01 LENOVO TP-7K 00002290 INTL 20050513)
[ 0.017064] ACPI: Reserving FACP table memory at [mem 0xbfebb400-0xbfebb4f3] ACPI: Reserving DSDT table memory at [mem 0xbfebb81d-0xbfecbc68] ACPI: Reserving FACS table memory at [mem 0xbfee4000-0xbfee403f] ACPI: Reserving FACS table memory at [mem 0xbfee4000-0xbfee403f] ACPI: Reserving SSDT table memory at [mem 0xbfebb5b4-0xbfebb81c] ACPI: Reserving ECDT table memory at [mem 0xbfecbc69-0xbfecbcba] ACPI: Reserving TCPA table memory at [mem 0xbfecbcbb-0xbfecbcec] ACPI: Reserving APIC table memory at [mem 0xbfecbced-0xbfecbd54] ACPI: Reserving MCFG table memory at [mem 0xbfecbd55-0xbfecbd90] ACPI: Reserving HPET table memory at [mem 0xbfecbd91-0xbfecbdc8] ACPI: Reserving SLIC table memory at [mem 0xbfecbe62-0xbfecbfd7] ACPI: Reserving BOOT table memory at [mem 0xbfecbfd8-0xbfecbfff] ACPI: Reserving SSDT table memory at [mem 0xbfee26d9-0xbfee2937] ACPI: Reserving SSDT table memory at [mem 0xbfee2938-0xbfee29dd] ACPI: Reserving SSDT table memory at [mem 0xbfee29de-0xbfee2ed4] ACPI: Reserving SSDT table memory at [mem 0xbfee2ed5-0xbfee30ac] No NUMA configuration found
[ 0.017257] Faking a node at [mem 0x0000000000000000-0x000000013fffffff] NODE_DATA(0) allocated [mem 0x13ffd3000-0x13fffcfff] Zone ranges:
[ 0.017880] DMA [mem 0x0000000000001000-0x0000000000ffffff] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] Normal [mem 0x0000000100000000-0x000000013fffffff] Device empty
[ 0.017891] Movable zone start for each node
[ 0.017895] Early memory node ranges
[ 0.017896] node 0: [mem 0x0000000000001000-0x000000000009cfff] node 0: [mem 0x0000000000100000-0x00000000bfeaffff] node 0: [mem 0x0000000100000000-0x000000013fffffff] Initmem setup node 0 [mem 0x0000000000001000-0x000000013fffffff] On node 0, zone DMA: 1 pages in unavailable ranges
[ 0.017983] On node 0, zone DMA: 99 pages in unavailable ranges
[ 0.052836] On node 0, zone Normal: 336 pages in unavailable ranges
[ 0.053328] ACPI: PM-Timer IO Port: 0x1008
[ 0.053349] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.053353] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.053371] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.053375] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.053378] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.053384] ACPI: Using ACPI (MADT) for SMP configuration information
[ 0.053386] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.053396] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.053426] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] PM: hibernation: Registered nosave memory: [mem 0x0009d000-0x0009dfff] PM: hibernation: Registered nosave memory: [mem 0x0009e000-0x0009ffff] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000d1fff] PM: hibernation: Registered nosave memory: [mem 0x000d2000-0x000d3fff] PM: hibernation: Registered nosave memory: [mem 0x000d4000-0x000dffff] PM: hibernation: Registered nosave memory: [mem 0x000e0000-0x000fffff] PM: hibernation: Registered nosave memory: [mem 0xbfeb0000-0xbfecbfff] PM: hibernation: Registered nosave memory: [mem 0xbfecc000-0xbfefffff] PM: hibernation: Registered nosave memory: [mem 0xbff00000-0xbfffffff] PM: hibernation: Registered nosave memory: [mem 0xc0000000-0xefffffff] PM: hibernation: Registered nosave memory: [mem 0xf0000000-0xf3ffffff] PM: hibernation: Registered nosave memory: [mem 0xf4000000-0xfebfffff] PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec0ffff] PM: hibernation: Registered nosave memory: [mem 0xfec10000-0xfecfffff] PM: hibernation: Registered nosave memory: [mem 0xfed00000-0xfed13fff] PM: hibernation: Registered nosave memory: [mem 0xfed14000-0xfed19fff] PM: hibernation: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff] PM: hibernation: Registered nosave memory: [mem 0xfed1c000-0xfed8ffff] PM: hibernation: Registered nosave memory: [mem 0xfed90000-0xfedfffff] PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff] PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xfeffffff] PM: hibernation: Registered nosave memory: [mem 0xff000000-0xffffffff] [mem 0xc0000000-0xefffffff] available for PCI devices
[ 0.053467] Booting paravirtualized kernel on bare hardware
[ 0.053472] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.053485] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
[ 0.054726] percpu: Embedded 60 pages/cpu s208896 r8192 d28672 u1048576
[ 0.054737] pcpu-alloc: s208896 r8192 d28672 u1048576 alloc=1*2097152
[ 0.054742] pcpu-alloc: [0] 0 1
[ 0.054794] Built 1 zonelists, mobility grouping on. Total pages: 1031605
[ 0.054800] Policy zone: Normal
[ 0.054802] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.15.0-56-generic root=UUID=HASH_588-DBF4-4CCD-941A-2CFA371230BA ro quiet splash vt.handoff=7
[ 0.054942] Unknown kernel command line parameters "splash BOOT_IMAGE=/boot/vmlinuz-5.15.0-56-generic", will be passed to user space.
[ 0.056907] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[ 0.057975] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.058043] mem auto-init: stack:off, heap alloc:on, heap free:off
[ 0.162321] Memory: 3903148K/4192560K available (16393K kernel code, 4378K rwdata, 10812K rodata, 3232K init, 6568K bss, 289152K reserved, 0K cma-reserved)
[ 0.162799] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.162833] Kernel/User page tables isolation: enabled
[ 0.162872] ftrace: allocating 50523 entries in 198 pages
[ 0.194518] ftrace: allocated 198 pages with 4 groups
[ 0.194809] rcu: Hierarchical RCU implementation.
[ 0.194812] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=2.
[ 0.194815] Rude variant of Tasks RCU enabled.
[ 0.194816] Tracing variant of Tasks RCU enabled.
[ 0.194818] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.194819] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.201787] NR_IRQS: 524544, nr_irqs: 440, preallocated irqs: 16
[ 0.202091] Console: colour dummy device 80x25
[ 0.202113] printk: console [tty0] enabled
[ 0.202153] ACPI: Core revision 20210730
[ 0.202336] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.202364] APIC: Switch to symmetric I/O mode setup
[ 0.202817] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.222360] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1e3206ed36d, max_idle_ns: 440795207697 ns
[ 0.222371] Calibrating delay loop (skipped), value calculated using timer frequency.. 4189.61 BogoMIPS (lpj=8379228)
[ 0.222375] pid_max: default: 32768 minimum: 301
[ 0.222465] LSM: Security Framework initializing
[ 0.222486] landlock: Up and running.
[ 0.222487] Yama: becoming mindful.
[ 0.222547] AppArmor: AppArmor initialized
[ 0.222649] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.222677] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.223176] x86/cpu: VMX (outside TXT) disabled by BIOS
[ 0.223189] CPU0: Thermal monitoring enabled (TM2)
[ 0.223204] process: using mwait in idle threads
[ 0.223208] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
[ 0.223210] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
[ 0.223216] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.223220] Spectre V2 : Mitigation: Retpolines
[ 0.223221] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.223222] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
[ 0.223224] Speculative Store Bypass: Vulnerable
[ 0.223228] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
[ 0.223229] MMIO Stale Data: Unknown: No mitigations
[ 0.250234] Freeing SMP alternatives memory: 40K
[ 0.361901] smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU T8100 @ 2.10GHz (family: 0x6, model: 0x17, stepping: 0x6)
[ 0.362256] Performance Events: PEBS fmt0+, Core2 events, 4-deep LBR, Intel PMU driver.
[ 0.362268] ... version: 2
[ 0.362269] ... bit width: 40
[ 0.362270] ... generic registers: 2
[ 0.362271] ... value mask: 000000ffffffffff
[ 0.362273] ... max period: 000000007fffffff
[ 0.362274] ... fixed-purpose events: 3
[ 0.362276] ... event mask: 0000000700000003
[ 0.362365] rcu: Hierarchical SRCU implementation.
[ 0.362365] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.362365] smp: Bringing up secondary CPUs ...
[ 0.362365] x86: Booting SMP configuration:
[ 0.362365] .... node #0, CPUs: #1
[ 0.368418] TSC synchronization [CPU#0 -> CPU#1]:
[ 0.368424] Measured 347099 cycles TSC warp between CPUs, turning off TSC clock.
[ 0.368427] tsc: Marking TSC unstable due to check_tsc_sync_source failed
[ 0.370480] smp: Brought up 1 node, 2 CPUs
[ 0.370480] smpboot: Max logical packages: 1
[ 0.370480] smpboot: Total of 2 processors activated (8379.22 BogoMIPS)
[ 0.372945] devtmpfs: initialized
[ 0.372945] x86/mm: Memory block size: 128MB
[ 0.374680] ACPI: PM: Registering ACPI NVS region [mem 0xbfecc000-0xbfefffff] (212992 bytes)
[ 0.374763] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.374777] futex hash table entries: 512 (order: 3, 32768 bytes, linear)
[ 0.374871] pinctrl core: initialized pinctrl subsystem
[ 0.375066] PM: RTC time: 14:46:33, date: 2023-01-07
[ 0.375386] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.375675] DMA: preallocated 512 KiB GFP_KERNEL pool for atomic allocations
[ 0.375803] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.375936] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.376016] thermal_sys: Registered thermal governor 'fair_share'
[ 0.376016] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.376016] thermal_sys: Registered thermal governor 'step_wise'
[ 0.376016] thermal_sys: Registered thermal governor 'user_space'
[ 0.376016] thermal_sys: Registered thermal governor 'power_allocator'
[ 0.376016] EISA bus registered
[ 0.376016] cpuidle: using governor ladder
[ 0.376016] cpuidle: using governor menu
[ 0.376016] Simple Boot Flag at 0x35 set to 0x1
[ 0.376016] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.376016] ACPI: bus type PCI registered
[ 0.376016] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.376016] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[ 0.376016] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
[ 0.376016] PCI: Using configuration type 1 for base access
[ 0.379644] Kprobes globally optimized
[ 0.379877] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.382428] fbcon: Taking over console
[ 0.382468] ACPI: Added _OSI(Module Device)
[ 0.382471] ACPI: Added _OSI(Processor Device)
[ 0.382472] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.382474] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.382476] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.382477] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.382479] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[ 0.402919] ACPI: 6 ACPI AML tables successfully acquired and loaded
[ 0.404064] ACPI: EC: EC started
[ 0.404066] ACPI: EC: interrupt blocked
[ 0.405413] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.405416] ACPI: EC: Boot ECDT EC used to handle transactions
[ 0.405824] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.419129] ACPI: Dynamic OEM Table Load:
[ 0.419140] ACPI: SSDT 0xFFFF8FE300896000 0002C4 (v01 PmRef Cpu0Ist 00000100 INTL 20050513)
[ 0.420550] ACPI: Dynamic OEM Table Load:
[ 0.420560] ACPI: SSDT 0xFFFF8FE300079000 00085E (v01 PmRef Cpu0Cst 00000100 INTL 20050513)
[ 0.422660] ACPI: Dynamic OEM Table Load:
[ 0.422669] ACPI: SSDT 0xFFFF8FE300ABE500 0000C8 (v01 PmRef Cpu1Ist 00000100 INTL 20050513)
[ 0.423736] ACPI: Dynamic OEM Table Load:
[ 0.423744] ACPI: SSDT 0xFFFF8FE300B09480 000085 (v01 PmRef Cpu1Cst 00000100 INTL 20050513)
[ 0.425003] ACPI: Interpreter enabled
[ 0.425032] ACPI: PM: (supports S0 S3 S4 S5)
[ 0.425034] ACPI: Using IOAPIC for interrupt routing
[ 0.425075] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.425077] PCI: Using E820 reservations for host bridge windows
[ 0.425455] ACPI: Enabled 5 GPEs in block 00 to 1F
[ 0.435700] ACPI: PM: Power Resource [PUBS] acpi PNP0C0A:01: ACPI dock station (docks/bays count: 1)
[ 0.438995] acpi LNXIOBAY:00: ACPI dock station (docks/bays count: 2)
[ 0.445071] acpi IBM0079:00: ACPI dock station (docks/bays count: 3)
[ 0.445922] ACPI: PCI: Interrupt link LNKA configured for IRQ 10
[ 0.446150] ACPI: PCI: Interrupt link LNKB configured for IRQ 11
[ 0.446382] ACPI: PCI: Interrupt link LNKC configured for IRQ 11
[ 0.446610] ACPI: PCI: Interrupt link LNKD configured for IRQ 11
[ 0.446836] ACPI: PCI: Interrupt link LNKE configured for IRQ 11
[ 0.447062] ACPI: PCI: Interrupt link LNKF configured for IRQ 11
[ 0.447289] ACPI: PCI: Interrupt link LNKG configured for IRQ 11
[ 0.447516] ACPI: PCI: Interrupt link LNKH configured for IRQ 11
[ 0.447702] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.447712] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3] acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug LTR DPC] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[ 0.449352] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[ 0.449755] PCI host bridge to bus 0000:00
[ 0.449760] pci_bus 0000:00: root bus resource [bus 00-ff] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000dffff window] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed4bfff window] pci 0000:00:00.0: [8086:2a00] type 00 class 0x060000
[ 0.450129] pci 0000:00:01.0: [8086:2a01] type 01 class 0x060400
[ 0.450186] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.450524] pci 0000:00:19.0: [8086:104d] type 00 class 0x020000
[ 0.450569] pci 0000:00:19.0: reg 0x10: [mem 0xfe200000-0xfe21ffff] pci 0000:00:19.0: reg 0x14: [mem 0xfe224000-0xfe224fff] pci 0000:00:19.0: reg 0x18: [io 0x1800-0x181f] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.450993] pci 0000:00:1a.0: [8086:2834] type 00 class 0x0c0300
[ 0.451135] pci 0000:00:1a.0: reg 0x20: [io 0x1820-0x183f] pci 0000:00:1a.1: [8086:2835] type 00 class 0x0c0300
[ 0.451569] pci 0000:00:1a.1: reg 0x20: [io 0x1840-0x185f] pci 0000:00:1a.7: [8086:283a] type 00 class 0x0c0320
[ 0.451939] pci 0000:00:1a.7: reg 0x10: [mem 0xfe225800-0xfe225bff] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.452411] pci 0000:00:1b.0: [8086:284b] type 00 class 0x040300
[ 0.452441] pci 0000:00:1b.0: reg 0x10: [mem 0xfe220000-0xfe223fff 64bit] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.452852] pci 0000:00:1c.0: [8086:283f] type 01 class 0x060400
[ 0.453015] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.453304] pci 0000:00:1c.1: [8086:2841] type 01 class 0x060400
[ 0.453468] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.453766] pci 0000:00:1c.2: [8086:2843] type 01 class 0x060400
[ 0.453918] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.454200] pci 0000:00:1c.3: [8086:2845] type 01 class 0x060400
[ 0.454375] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.454675] pci 0000:00:1c.4: [8086:2847] type 01 class 0x060400
[ 0.454843] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.455120] pci 0000:00:1d.0: [8086:2830] type 00 class 0x0c0300
[ 0.455252] pci 0000:00:1d.0: reg 0x20: [io 0x1860-0x187f] pci 0000:00:1d.1: [8086:2831] type 00 class 0x0c0300
[ 0.455699] pci 0000:00:1d.1: reg 0x20: [io 0x1880-0x189f] pci 0000:00:1d.2: [8086:2832] type 00 class 0x0c0300
[ 0.456147] pci 0000:00:1d.2: reg 0x20: [io 0x18a0-0x18bf] pci 0000:00:1d.7: [8086:2836] type 00 class 0x0c0320
[ 0.456539] pci 0000:00:1d.7: reg 0x10: [mem 0xfe225c00-0xfe225fff] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.457035] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[ 0.457401] pci 0000:00:1f.0: [8086:2815] type 00 class 0x060100
[ 0.457558] pci 0000:00:1f.0: quirk: [io 0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO
[ 0.457569] pci 0000:00:1f.0: quirk: [io 0x1180-0x11bf] claimed by ICH6 GPIO
[ 0.457576] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 1600 (mask 007f)
[ 0.457583] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 15e0 (mask 000f)
[ 0.457589] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 1680 (mask 001f)
[ 0.457891] pci 0000:00:1f.1: [8086:2850] type 00 class 0x01018a
[ 0.457943] pci 0000:00:1f.1: reg 0x10: [io 0x0000-0x0007] pci 0000:00:1f.1: reg 0x14: [io 0x0000-0x0003] pci 0000:00:1f.1: reg 0x18: [io 0x0000-0x0007] pci 0000:00:1f.1: reg 0x1c: [io 0x0000-0x0003] pci 0000:00:1f.1: reg 0x20: [io 0x18c0-0x18cf] pci 0000:00:1f.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7] pci 0000:00:1f.1: legacy IDE quirk: reg 0x14: [io 0x03f6] pci 0000:00:1f.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177] pci 0000:00:1f.1: legacy IDE quirk: reg 0x1c: [io 0x0376] pci 0000:00:1f.2: [8086:2829] type 00 class 0x010601
[ 0.458418] pci 0000:00:1f.2: reg 0x10: [io 0x18f8-0x18ff] pci 0000:00:1f.2: reg 0x14: [io 0x18ec-0x18ef] pci 0000:00:1f.2: reg 0x18: [io 0x18f0-0x18f7] pci 0000:00:1f.2: reg 0x1c: [io 0x18e8-0x18eb] pci 0000:00:1f.2: reg 0x20: [io 0x1c00-0x1c1f] pci 0000:00:1f.2: reg 0x24: [mem 0xfe225000-0xfe2257ff] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.458820] pci 0000:00:1f.3: [8086:283e] type 00 class 0x0c0500
[ 0.458861] pci 0000:00:1f.3: reg 0x10: [mem 0xfe226000-0xfe2260ff] pci 0000:00:1f.3: reg 0x20: [io 0x1c20-0x1c3f] pci 0000:01:00.0: [10de:0429] type 00 class 0x030000
[ 0.459194] pci 0000:01:00.0: reg 0x10: [mem 0xd6000000-0xd6ffffff] pci 0000:01:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref] pci 0000:01:00.0: reg 0x1c: [mem 0xd4000000-0xd5ffffff 64bit] pci 0000:01:00.0: reg 0x24: [io 0x2000-0x207f] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref] pci 0000:01:00.0: enabling Extended Tags
[ 0.459282] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] pci 0000:00:01.0: PCI bridge to [bus 01] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff] pci 0000:00:01.0: bridge window [mem 0xd4000000-0xd6ffffff] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref] pci 0000:00:1c.0: PCI bridge to [bus 02] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff] pci 0000:00:1c.0: bridge window [mem 0xfc000000-0xfdffffff] pci 0000:00:1c.0: bridge window [mem 0xf8000000-0xf80fffff 64bit pref] pci 0000:03:00.0: [8086:4230] type 00 class 0x028000
[ 0.459837] pci 0000:03:00.0: reg 0x10: [mem 0xdf2fe000-0xdf2fffff 64bit] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[ 0.460373] pci 0000:00:1c.1: PCI bridge to [bus 03] pci 0000:00:1c.1: bridge window [io 0x4000-0x4fff] pci 0000:00:1c.1: bridge window [mem 0xdc100000-0xdf2fffff] pci 0000:00:1c.1: bridge window [mem 0xdfd00000-0xdfdfffff 64bit pref] pci 0000:00:1c.2: PCI bridge to [bus 04] pci 0000:00:1c.2: bridge window [io 0x5000-0x5fff] pci 0000:00:1c.2: bridge window [mem 0xd8000000-0xd9ffffff] pci 0000:00:1c.2: bridge window [mem 0xdfa00000-0xdfafffff 64bit pref] pci 0000:00:1c.3: PCI bridge to [bus 05-0c] pci 0000:00:1c.3: bridge window [io 0x6000-0x6fff] pci 0000:00:1c.3: bridge window [mem 0xd0000000-0xd1ffffff] pci 0000:00:1c.3: bridge window [mem 0xdf700000-0xdf7fffff 64bit pref] pci 0000:00:1c.4: PCI bridge to [bus 0d-14] pci 0000:00:1c.4: bridge window [io 0x7000-0x7fff] pci 0000:00:1c.4: bridge window [mem 0xcc000000-0xcdffffff] pci 0000:00:1c.4: bridge window [mem 0xdf400000-0xdf4fffff 64bit pref] pci_bus 0000:15: extended config space not accessible
[ 0.460908] pci 0000:15:00.0: proprietary Ricoh MMC controller disabled (via CardBus function)
[ 0.460910] pci 0000:15:00.0: MMC cards are now supported by standard SDHCI controller
[ 0.460912] pci 0000:15:00.0: [1180:0476] type 02 class 0x060700
[ 0.460953] pci 0000:15:00.0: reg 0x10: [mem 0xf8100000-0xf8100fff] pci 0000:15:00.0: supports D1 D2
[ 0.461026] pci 0000:15:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.461176] pci 0000:15:00.1: [1180:0832] type 00 class 0x0c0010
[ 0.461217] pci 0000:15:00.1: reg 0x10: [mem 0xf8101000-0xf81017ff] pci 0000:15:00.1: supports D1 D2
[ 0.461394] pci 0000:15:00.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.461523] pci 0000:15:00.2: [1180:0822] type 00 class 0x080500
[ 0.461559] pci 0000:15:00.2: reg 0x10: [mem 0xf8101800-0xf81018ff] pci 0000:15:00.2: supports D1 D2
[ 0.461736] pci 0000:15:00.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.461858] pci 0000:15:00.4: [1180:0592] type 00 class 0x088000
[ 0.461899] pci 0000:15:00.4: reg 0x10: [mem 0xf8102000-0xf81020ff] pci 0000:15:00.4: supports D1 D2
[ 0.462078] pci 0000:15:00.4: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.462191] pci 0000:15:00.5: [1180:0852] type 00 class 0x088000
[ 0.462232] pci 0000:15:00.5: reg 0x10: [mem 0xf8102400-0xf81024ff] pci 0000:15:00.5: supports D1 D2
[ 0.462414] pci 0000:15:00.5: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.462600] pci 0000:00:1e.0: PCI bridge to [bus 15-18] (subtractive decode)
[ 0.462608] pci 0000:00:1e.0: bridge window [io 0x8000-0xbfff] pci 0000:00:1e.0: bridge window [mem 0xf8100000-0xfbffffff] pci 0000:00:1e.0: bridge window [mem 0xf4000000-0xf7ffffff 64bit pref] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
[ 0.462631] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ 0.462633] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[ 0.462636] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000dffff window] (subtractive decode)
[ 0.462639] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xfebfffff window] (subtractive decode)
[ 0.462641] pci 0000:00:1e.0: bridge window [mem 0xfed40000-0xfed4bfff window] (subtractive decode)
[ 0.462719] pci_bus 0000:16: extended config space not accessible
[ 0.462745] pci_bus 0000:16: busn_res: [bus 16-18] end is updated to 17
[ 0.466553] ACPI: EC: interrupt unblocked
[ 0.466556] ACPI: EC: event unblocked
[ 0.466565] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.466567] ACPI: EC: GPE=0x12
[ 0.466569] ACPI: \_SB_.PCI0.LPC_.EC__: Boot ECDT EC initialization complete
[ 0.466573] ACPI: \_SB_.PCI0.LPC_.EC__: EC: Used to handle transactions and events
[ 0.466734] iommu: Default domain type: Translated
[ 0.466734] iommu: DMA domain TLB invalidation policy: lazy mode
[ 0.466837] SCSI subsystem initialized
[ 0.466847] libata version 3.00 loaded.
[ 0.466847] pci 0000:01:00.0: vgaarb: setting as boot VGA device
[ 0.466847] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.466847] pci 0000:01:00.0: vgaarb: bridge control possible
[ 0.466847] vgaarb: loaded
[ 0.466847] ACPI: bus type USB registered
[ 0.466847] usbcore: registered new interface driver usbfs
[ 0.466847] usbcore: registered new interface driver hub
[ 0.466847] usbcore: registered new device driver usb
[ 0.466847] pps_core: LinuxPPS API ver. 1 registered
[ 0.466847] pps_core: Software ver. 5.3.6 - Copyright 0FB6-08D5 Rodolfo Giometti <XXX@XXX>
[ 0.466847] PTP clock support registered
[ 0.466847] EDAC MC: Ver: 3.0.0
[ 0.466847] NetLabel: Initializing
[ 0.466847] NetLabel: domain hash size = 128
[ 0.466847] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.466847] NetLabel: unlabeled traffic allowed by default
[ 0.466847] PCI: Using ACPI for IRQ routing
[ 0.470864] PCI: pci_cache_line_size set to 64 bytes
[ 0.471102] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff] e820: reserve RAM buffer [mem 0xbfeb0000-0xbfffffff] hpet: 3 channels of 0 reserved for per-cpu timers
[ 0.472166] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.472173] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.475499] clocksource: Switched to clocksource hpet
[ 0.501567] VFS: Disk quotas dquot_6.6.0
[ 0.501608] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.501867] AppArmor: AppArmor Filesystem Enabled
[ 0.501906] pnp: PnP ACPI init
[ 0.502975] pnp 00:00: disabling [mem 0x000c0000-0x000c3fff] because it overlaps 0000:01:00.0 BAR 6 [mem 0x000c0000-0x000dffff] pnp 00:00: disabling [mem 0x000c4000-0x000c7fff] because it overlaps 0000:01:00.0 BAR 6 [mem 0x000c0000-0x000dffff] pnp 00:00: disabling [mem 0x000c8000-0x000cbfff] because it overlaps 0000:01:00.0 BAR 6 [mem 0x000c0000-0x000dffff] pnp 00:00: disabling [mem 0x000cc000-0x000cffff] because it overlaps 0000:01:00.0 BAR 6 [mem 0x000c0000-0x000dffff] pnp 00:00: disabling [mem 0x000d0000-0x000d3fff] because it overlaps 0000:01:00.0 BAR 6 [mem 0x000c0000-0x000dffff] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.503061] system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved
[ 0.503064] system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved
[ 0.503066] system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved
[ 0.503069] system 00:00: [mem 0x000ec000-0x000effff] could not be reserved
[ 0.503072] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
[ 0.503075] system 00:00: [mem 0x00100000-0xbfffffff] could not be reserved
[ 0.503078] system 00:00: [mem 0xfec00000-0xfed3ffff] could not be reserved
[ 0.503081] system 00:00: [mem 0xfed4c000-0xffffffff] could not be reserved
[ 0.503304] system 00:01: [io 0x164e-0x164f] has been reserved
[ 0.503308] system 00:01: [io 0x1000-0x107f] has been reserved
[ 0.503311] system 00:01: [io 0x1180-0x11bf] has been reserved
[ 0.503314] system 00:01: [io 0x0800-0x080f] has been reserved
[ 0.503323] system 00:01: [io 0x15e0-0x15ef] has been reserved
[ 0.503326] system 00:01: [io 0x1600-0x165f] could not be reserved
[ 0.503329] system 00:01: [mem 0xf0000000-0xf3ffffff] has been reserved
[ 0.503332] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.503335] system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved
[ 0.503338] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.503341] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.503344] system 00:01: [mem 0xfed45000-0xfed4bfff] has been reserved
[ 0.505472] pnp: PnP ACPI: found 6 devices
[ 0.512617] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.512743] NET: Registered PF_INET protocol family
[ 0.512966] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.514803] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
[ 0.514936] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.515060] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.515346] TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear)
[ 0.515436] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.515630] MPTCP token hash table entries: 4096 (order: 4, 98304 bytes, linear)
[ 0.515697] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear)
[ 0.515744] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear)
[ 0.515832] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.515843] NET: Registered PF_XDP protocol family
[ 0.515902] pci 0000:00:01.0: PCI bridge to [bus 01] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff] pci 0000:00:01.0: bridge window [mem 0xd4000000-0xd6ffffff] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref] pci 0000:00:1c.0: PCI bridge to [bus 02] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff] pci 0000:00:1c.0: bridge window [mem 0xfc000000-0xfdffffff] pci 0000:00:1c.0: bridge window [mem 0xf8000000-0xf80fffff 64bit pref] pci 0000:00:1c.1: PCI bridge to [bus 03] pci 0000:00:1c.1: bridge window [io 0x4000-0x4fff] pci 0000:00:1c.1: bridge window [mem 0xdc100000-0xdf2fffff] pci 0000:00:1c.1: bridge window [mem 0xdfd00000-0xdfdfffff 64bit pref] pci 0000:00:1c.2: PCI bridge to [bus 04] pci 0000:00:1c.2: bridge window [io 0x5000-0x5fff] pci 0000:00:1c.2: bridge window [mem 0xd8000000-0xd9ffffff] pci 0000:00:1c.2: bridge window [mem 0xdfa00000-0xdfafffff 64bit pref] pci 0000:00:1c.3: PCI bridge to [bus 05-0c] pci 0000:00:1c.3: bridge window [io 0x6000-0x6fff] pci 0000:00:1c.3: bridge window [mem 0xd0000000-0xd1ffffff] pci 0000:00:1c.3: bridge window [mem 0xdf700000-0xdf7fffff 64bit pref] pci 0000:00:1c.4: PCI bridge to [bus 0d-14] pci 0000:00:1c.4: bridge window [io 0x7000-0x7fff] pci 0000:00:1c.4: bridge window [mem 0xcc000000-0xcdffffff] pci 0000:00:1c.4: bridge window [mem 0xdf400000-0xdf4fffff 64bit pref] pci 0000:15:00.0: BAR 15: assigned [mem 0xf4000000-0xf7ffffff pref] pci 0000:15:00.0: BAR 16: assigned [mem 0xc0000000-0xc3ffffff] pci 0000:15:00.0: BAR 13: assigned [io 0x8000-0x80ff] pci 0000:15:00.0: BAR 14: assigned [io 0x8400-0x84ff] pci 0000:15:00.0: CardBus bridge to [bus 16-17] pci 0000:15:00.0: bridge window [io 0x8000-0x80ff] pci 0000:15:00.0: bridge window [io 0x8400-0x84ff] pci 0000:15:00.0: bridge window [mem 0xf4000000-0xf7ffffff pref] pci 0000:15:00.0: bridge window [mem 0xc0000000-0xc3ffffff] pci 0000:00:1e.0: PCI bridge to [bus 15-18] pci 0000:00:1e.0: bridge window [io 0x8000-0xbfff] pci 0000:00:1e.0: bridge window [mem 0xf8100000-0xfbffffff] pci 0000:00:1e.0: bridge window [mem 0xf4000000-0xf7ffffff 64bit pref] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000dffff window] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xfebfffff window] pci_bus 0000:00: resource 9 [mem 0xfed40000-0xfed4bfff window] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff] pci_bus 0000:01: resource 1 [mem 0xd4000000-0xd6ffffff] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref] pci_bus 0000:02: resource 0 [io 0x3000-0x3fff] pci_bus 0000:02: resource 1 [mem 0xfc000000-0xfdffffff] pci_bus 0000:02: resource 2 [mem 0xf8000000-0xf80fffff 64bit pref] pci_bus 0000:03: resource 0 [io 0x4000-0x4fff] pci_bus 0000:03: resource 1 [mem 0xdc100000-0xdf2fffff] pci_bus 0000:03: resource 2 [mem 0xdfd00000-0xdfdfffff 64bit pref] pci_bus 0000:04: resource 0 [io 0x5000-0x5fff] pci_bus 0000:04: resource 1 [mem 0xd8000000-0xd9ffffff] pci_bus 0000:04: resource 2 [mem 0xdfa00000-0xdfafffff 64bit pref] pci_bus 0000:05: resource 0 [io 0x6000-0x6fff] pci_bus 0000:05: resource 1 [mem 0xd0000000-0xd1ffffff] pci_bus 0000:05: resource 2 [mem 0xdf700000-0xdf7fffff 64bit pref] pci_bus 0000:0d: resource 0 [io 0x7000-0x7fff] pci_bus 0000:0d: resource 1 [mem 0xcc000000-0xcdffffff] pci_bus 0000:0d: resource 2 [mem 0xdf400000-0xdf4fffff 64bit pref] pci_bus 0000:15: resource 0 [io 0x8000-0xbfff] pci_bus 0000:15: resource 1 [mem 0xf8100000-0xfbffffff] pci_bus 0000:15: resource 2 [mem 0xf4000000-0xf7ffffff 64bit pref] pci_bus 0000:15: resource 4 [io 0x0000-0x0cf7 window] pci_bus 0000:15: resource 5 [io 0x0d00-0xffff window] pci_bus 0000:15: resource 6 [mem 0x000a0000-0x000bffff window] pci_bus 0000:15: resource 7 [mem 0x000d4000-0x000dffff window] pci_bus 0000:15: resource 8 [mem 0xc0000000-0xfebfffff window] pci_bus 0000:15: resource 9 [mem 0xfed40000-0xfed4bfff window] pci_bus 0000:16: resource 0 [io 0x8000-0x80ff] pci_bus 0000:16: resource 1 [io 0x8400-0x84ff] pci_bus 0000:16: resource 2 [mem 0xf4000000-0xf7ffffff pref] pci_bus 0000:16: resource 3 [mem 0xc0000000-0xc3ffffff] pci 0000:15:00.0: CLS mismatch (64 != 32), using 64 bytes
[ 0.518053] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.518054] software IO TLB: mapped [mem 0x00000000bbeb0000-0x00000000bfeb0000] (64MB)
[ 0.518190] Trying to unpack rootfs image as initramfs...
[ 0.518996] Initialise system trusted keyrings
[ 0.519028] Key type blacklist registered
[ 0.519179] workingset: timestamp_bits=36 max_order=20 bucket_order=0
[ 0.522065] zbud: loaded
[ 0.522827] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.523266] fuse: init (API version 7.34)
[ 0.523579] integrity: Platform Keyring initialized
[ 0.537154] Key type asymmetric registered
[ 0.537162] Asymmetric key parser 'x509' registered
[ 0.537250] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243)
[ 0.537350] io scheduler mq-deadline registered
[ 0.538023] pcieport 0000:00:01.0: PME: Signaling with IRQ 24
[ 0.538086] pcieport 0000:00:01.0: pciehp: Slot #1 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise- Interlock- NoCompl+ IbPresDis- LLActRep-
[ 0.538526] pcieport 0000:00:1c.0: PME: Signaling with IRQ 25
[ 0.538594] pcieport 0000:00:1c.0: pciehp: Slot #2 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl- IbPresDis- LLActRep+ (with Cmd Compl erratum)
[ 0.539074] pcieport 0000:00:1c.1: PME: Signaling with IRQ 26
[ 0.539139] pcieport 0000:00:1c.1: pciehp: Slot #3 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl- IbPresDis- LLActRep+ (with Cmd Compl erratum)
[ 0.539628] pcieport 0000:00:1c.2: PME: Signaling with IRQ 27
[ 0.539697] pcieport 0000:00:1c.2: pciehp: Slot #4 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl- IbPresDis- LLActRep+ (with Cmd Compl erratum)
[ 0.540153] pcieport 0000:00:1c.3: PME: Signaling with IRQ 28
[ 0.540209] pcieport 0000:00:1c.3: pciehp: Slot #5 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl- IbPresDis- LLActRep+ (with Cmd Compl erratum)
[ 0.540674] pcieport 0000:00:1c.4: PME: Signaling with IRQ 29
[ 0.540736] pcieport 0000:00:1c.4: pciehp: Slot #2 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl- IbPresDis- LLActRep+ (with Cmd Compl erratum)
[ 0.541052] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 0.542233] Monitor-Mwait will be used to enter C-1 state
[ 0.542254] Monitor-Mwait will be used to enter C-2 state
[ 0.542271] Monitor-Mwait will be used to enter C-3 state
[ 0.542285] ACPI: \_PR_.CPU0: Found 3 idle states
[ 0.543410] ACPI: AC: AC Adapter [AC] (on-line)
[ 0.543501] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[ 0.543575] ACPI: button: Lid Switch [LID] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[ 0.543681] ACPI: button: Sleep Button [SLPB] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.543801] ACPI: button: Power Button [PWRF] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.549549] ACPI: thermal: Thermal Zone [THM0] (55 C)
[ 0.551527] thermal LNXTHERM:01: registered as thermal_zone1
[ 0.551530] ACPI: thermal: Thermal Zone [THM1] (56 C)
[ 0.552038] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.560151] Linux agpgart interface v0.103
[ 0.563798] tpm_tis 00:05: 1.2 TPM (device-id 0xFFFF, rev-id 255)
[ 0.567059] tpm tpm0: [Hardware Error]: Adjusting reported timeouts: A 10000->10000us B 10000->10000us C 0->752000us D 0->752000us
[ 0.593447] ACPI: battery: Slot [BAT0] (battery present)
[ 0.598109] loop: module loaded
[ 0.598674] ata_piix 0000:00:1f.1: version 2.13
[ 0.599967] scsi host0: ata_piix
[ 0.600415] scsi host1: ata_piix
[ 0.600494] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x18c0 irq 14
[ 0.600498] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x18c8 irq 15
[ 0.600792] tun: Universal TUN/TAP device driver, 1.6
[ 0.600959] PPP generic driver version 2.4.2
[ 0.601061] VFIO - User Level meta-driver version: 0.3
[ 0.601171] ata2: port disabled--ignoring
[ 0.601260] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.601268] ehci-pci: EHCI PCI platform driver
[ 0.601469] ehci-pci 0000:00:1a.7: EHCI Host Controller
[ 0.601479] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 0.605482] ehci-pci 0000:00:1a.7: irq 22, io mem 0xfe225800
[ 0.618453] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 0.618619] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15
[ 0.618624] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=...
[ 0.618627] usb usb1: Product: EHCI Host Controller
[ 0.618630] usb usb1: Manufacturer: Linux 5.15.0-56-generic ehci_hcd
[ 0.618632] usb usb1: SerialNumber: ...
[ 0.618892] hub 1-0:1.0: USB hub found
[ 0.618906] hub 1-0:1.0: 4 ports detected
[ 0.619530] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 0.619544] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 0.619573] ehci-pci 0000:00:1d.7: debug port 1
[ 0.623549] ehci-pci 0000:00:1d.7: irq 19, io mem 0xfe225c00
[ 0.638460] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.638567] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15
[ 0.638572] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=...
[ 0.638575] usb usb2: Product: EHCI Host Controller
[ 0.638577] usb usb2: Manufacturer: Linux 5.15.0-56-generic ehci_hcd
[ 0.638580] usb usb2: SerialNumber: ...
[ 0.638817] hub 2-0:1.0: USB hub found
[ 0.638830] hub 2-0:1.0: 6 ports detected
[ 0.639277] ehci-platform: EHCI generic platform driver
[ 0.639324] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.639340] ohci-pci: OHCI PCI platform driver
[ 0.639369] ohci-platform: OHCI generic platform driver
[ 0.639382] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.639610] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 0.639626] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 0.639638] uhci_hcd 0000:00:1a.0: detected 2 ports
[ 0.639692] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00001820
[ 0.639787] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.15
[ 0.639792] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=...
[ 0.639794] usb usb3: Product: UHCI Host Controller
[ 0.639796] usb usb3: Manufacturer: Linux 5.15.0-56-generic uhci_hcd
[ 0.639798] usb usb3: SerialNumber: ...
[ 0.639957] hub 3-0:1.0: USB hub found
[ 0.639968] hub 3-0:1.0: 2 ports detected
[ 0.640296] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 0.640304] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 0.640315] uhci_hcd 0000:00:1a.1: detected 2 ports
[ 0.640351] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001840
[ 0.640456] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.15
[ 0.640460] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=...
[ 0.640463] usb usb4: Product: UHCI Host Controller
[ 0.640466] usb usb4: Manufacturer: Linux 5.15.0-56-generic uhci_hcd
[ 0.640468] usb usb4: SerialNumber: ...
[ 0.640623] hub 4-0:1.0: USB hub found
[ 0.640634] hub 4-0:1.0: 2 ports detected
[ 0.640980] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.640988] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[ 0.640998] uhci_hcd 0000:00:1d.0: detected 2 ports
[ 0.641040] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00001860
[ 0.641134] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.15
[ 0.641138] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=...
[ 0.641141] usb usb5: Product: UHCI Host Controller
[ 0.641143] usb usb5: Manufacturer: Linux 5.15.0-56-generic uhci_hcd
[ 0.641145] usb usb5: SerialNumber: ...
[ 0.641286] hub 5-0:1.0: USB hub found
[ 0.641296] hub 5-0:1.0: 2 ports detected
[ 0.641635] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.641642] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[ 0.641653] uhci_hcd 0000:00:1d.1: detected 2 ports
[ 0.641700] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00001880
[ 0.641779] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.15
[ 0.641783] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=...
[ 0.641786] usb usb6: Product: UHCI Host Controller
[ 0.641788] usb usb6: Manufacturer: Linux 5.15.0-56-generic uhci_hcd
[ 0.641790] usb usb6: SerialNumber: ...
[ 0.641940] hub 6-0:1.0: USB hub found
[ 0.641950] hub 6-0:1.0: 2 ports detected
[ 0.642298] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.642306] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[ 0.642317] uhci_hcd 0000:00:1d.2: detected 2 ports
[ 0.642354] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018a0
[ 0.642478] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.15
[ 0.642483] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=...
[ 0.642486] usb usb7: Product: UHCI Host Controller
[ 0.642488] usb usb7: Manufacturer: Linux 5.15.0-56-generic uhci_hcd
[ 0.642490] usb usb7: SerialNumber: ...
[ 0.642618] hub 7-0:1.0: USB hub found
[ 0.642628] hub 7-0:1.0: 2 ports detected
[ 0.642955] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ 0.650953] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.650981] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.651225] mousedev: PS/2 mouse device common for all mice
[ 0.651490] rtc_cmos 00:02: RTC can wake from S4
[ 0.651871] rtc_cmos 00:02: registered as rtc0
[ 0.651938] rtc_cmos 00:02: setting system clock to 2023-01-07T14:46:33 UTC (1673102793)
[ 0.651972] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.651989] i2c_dev: i2c /dev entries driver
[ 0.652417] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log.
[ 0.652509] device-mapper: uevent: version 1.0.3
[ 0.652607] device-mapper: ioctl: 4.45.0-ioctl (2021-03-22) initialised: XXX@XXX
[ 0.652658] platform eisa.0: Probing EISA bus 0
[ 0.652681] platform eisa.0: EISA: Cannot allocate resource for mainboard
[ 0.652684] platform eisa.0: Cannot allocate resource for EISA slot 1
[ 0.652686] platform eisa.0: Cannot allocate resource for EISA slot 2
[ 0.652689] platform eisa.0: Cannot allocate resource for EISA slot 3
[ 0.652691] platform eisa.0: Cannot allocate resource for EISA slot 4
[ 0.652694] platform eisa.0: Cannot allocate resource for EISA slot 5
[ 0.652696] platform eisa.0: Cannot allocate resource for EISA slot 6
[ 0.652698] platform eisa.0: Cannot allocate resource for EISA slot 7
[ 0.652701] platform eisa.0: Cannot allocate resource for EISA slot 8
[ 0.652703] platform eisa.0: EISA: Detected 0 cards
[ 0.652707] intel_pstate: CPU model not supported
[ 0.652735] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.652795] vesafb: mode is 1680x1050x32, linelength=6720, pages=0
[ 0.652799] vesafb: scrolling: redraw
[ 0.652800] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.652836] vesafb: framebuffer at 0xd5000000, mapped to 0x(____ptrval____), using 6912k, total 6912k
[ 0.653058] Console: switching to colour frame buffer device 210x65
[ 0.761936] ata1.00: ATAPI: MATSHITADVD-RAM UJ-850 z, RB21, max UDMA/33
[ 0.768817] fb0: VESA VGA frame buffer device
[ 0.769941] drop_monitor: Initializing network drop monitor service
[ 0.770358] NET: Registered PF_INET6 protocol family
[ 0.771470] scsi 0:0:0:0: CD-ROM MATSHITA DVD-RAM UJ-850 z RB21 PQ: 0 ANSI: 5
[ 0.772675] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 0.828570] sr 0:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 0.828582] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 0.855787] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 0.855983] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 1.202441] usb 3-2: new full-speed USB device number 2 using uhci_hcd
[ 1.398509] usb 3-2: New USB device found, idVendor=147e, idProduct=2016, bcdDevice= 0.01
[ 1.398519] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=...
[ 1.398522] usb 3-2: Product: Fingerprint Sensor
[ 1.398524] usb 3-2: Manufacturer: TouchStrip
[ 1.824307] Freeing initrd memory: 104704K
[ 1.835924] Segment Routing with IPv6
[ 1.835955] In-situ OAM (IOAM) with IPv6
[ 1.836007] NET: Registered PF_PACKET protocol family
[ 1.836105] Key type dns_resolver registered
[ 1.836499] microcode: sig=0x10676, pf=0x80, revision=0x60f
[ 1.836578] microcode: Microcode Update Driver: v2.2.
[ 1.836585] IPI shorthand broadcast: enabled
[ 1.836768] registered taskstats version 1
[ 1.836851] Loading compiled-in X.509 certificates
[ 1.838399] Loaded X.509 cert 'Build time autogenerated kernel key: e377a8d98910596b8bf176f042050e2efd9d6422'
[ 1.839539] Loaded X.509 cert 'Canonical Ltd. Live Patch Signing: 14df34d1a87cf37625abec039ef2bf521249b969'
[ 1.840659] Loaded X.509 cert 'Canonical Ltd. Kernel Module Signing: 88f752e560a1e0737e31163a466ad7b70a850c19'
[ 1.840661] blacklist: Loading compiled-in revocation X.509 certificates
[ 1.840693] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing: 61482aa2830d0ab2ad5af10b7250da9033ddcef0'
[ 1.840904] zswap: loaded using pool lzo/zbud
[ 1.841239] Key type ._fscrypt registered
[ 1.841241] Key type .fscrypt registered
[ 1.841243] Key type fscrypt-provisioning registered
[ 1.841494] Key type trusted registered
[ 1.846996] Key type encrypted registered
[ 1.847004] AppArmor: AppArmor sha1 policy hashing enabled
[ 1.847045] Loading compiled-in module X.509 certificates
[ 1.848301] Loaded X.509 cert 'Build time autogenerated kernel key: e377a8d98910596b8bf176f042050e2efd9d6422'
[ 1.848305] ima: Allocated hash algorithm: sha1
[ 1.894551] ima: No architecture policies found
[ 1.894585] evm: Initialising EVM extended attributes:
[ 1.894586] evm: security.selinux
[ 1.894588] evm: security.SMACK64
[ 1.894589] evm: security.SMACK64EXEC
[ 1.894591] evm: security.SMACK64TRANSMUTE
[ 1.894592] evm: security.SMACK64MMAP
[ 1.894593] evm: security.apparmor
[ 1.894594] evm: security.ima
[ 1.894595] evm: security.capability
[ 1.894597] evm: HMAC attrs: 0x1
[ 1.895147] PM: Magic number: 7:215:788
[ 1.898796] RAS: Correctable Errors collector initialized.
[ 1.898814] Unstable clock detected, switching default tracing clock to "global"
If you want to keep using the local clock, then add:
"trace_clock=local"
on the kernel command line
[ 1.901606] Freeing unused decrypted memory: 2036K
[ 1.903364] Freeing unused kernel image (initmem) memory: 3232K
[ 1.918421] Write protecting the kernel read-only data: 30720k
[ 1.919890] Freeing unused kernel image (text/rodata gap) memory: 2036K
[ 1.920849] Freeing unused kernel image (rodata/data gap) memory: 1476K
[ 1.986079] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.986135] x86/mm: Checking user space page tables
[ 2.046603] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 2.046616] Run /init as init process
[ 2.046619] with arguments:
[ 2.046621] /init
[ 2.046623] splash
[ 2.046624] with environment:
[ 2.046625] HOME=/
[ 2.046627] TERM=linux
[ 2.046628] BOOT_IMAGE=/boot/vmlinuz-5.15.0-56-generic
[ 2.280950] ACPI: video: Video Device [VID1] (multi-head: yes rom: no post: no)
[ 2.284418] acpi device:07: registered as cooling_device2
[ 2.284543] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:06/LNXVIDEO:01/input/input5
[ 2.321825] e1000e: Intel(R) PRO/1000 Network Driver
[ 2.321830] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 2.322113] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 2.331931] ACPI Warning: SystemIO range 0x0000000000001028-0x000000000000102F conflicts with OpRegion 0x0000000000001000-0x000000000000107F (\_SB.PCI0.LPC.PMIO) (20210730/utaddress-204)
[ 2.331943] ACPI: OSL: Resource conflict; ACPI support missing from driver?
[ 2.331949] ACPI Warning: SystemIO range 0x00000000000011B0-0x00000000000011BF conflicts with OpRegion 0x0000000000001180-0x00000000000011BF (\_SB.PCI0.LPC.LPIO) (20210730/utaddress-204)
[ 2.331955] ACPI: OSL: Resource conflict; ACPI support missing from driver?
[ 2.331957] ACPI Warning: SystemIO range 0x0000000000001180-0x00000000000011AF conflicts with OpRegion 0x0000000000001180-0x00000000000011BF (\_SB.PCI0.LPC.LPIO) (20210730/utaddress-204)
[ 2.331963] ACPI: OSL: Resource conflict; ACPI support missing from driver?
[ 2.331964] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 2.334302] sdhci: Secure Digital Host Controller Interface driver
[ 2.334305] sdhci: Copyright(c) Pierre Ossman
[ 2.347544] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 2.349105] ahci 0000:00:1f.2: version 3.0
[ 2.349375] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 1.5 Gbps 0x5 impl SATA mode
[ 2.349381] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc
[ 2.352141] i2c i2c-0: 2/2 memory slots populated (from DMI)
[ 2.358780] scsi host2: ahci
[ 2.368017] scsi host3: ahci
[ 2.369709] sdhci-pci 0000:15:00.2: SDHCI controller found [1180:0822] (rev 21)
[ 2.369765] pci 0000:00:1e.0: enabling device (0005 -> 0007)
[ 2.369975] sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
[ 2.370052] mmc0 bounce up to 128 segments into one, max segment size 65536 bytes
[ 2.373520] scsi host4: ahci
[ 2.373644] ata3: SATA max UDMA/133 abar m2048@0xfe225000 port 0xfe225100 irq 31
[ 2.373649] ata4: DUMMY
[ 2.373655] ata5: SATA max UDMA/133 abar m2048@0xfe225000 port 0xfe225200 irq 31
[ 2.374104] sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
[ 2.378644] mmc0: SDHCI controller on PCI [0000:15:00.2] using DMA
[ 2.378675] sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
[ 2.442448] firewire_ohci 0000:15:00.1: added OHCI v1.10 device as card 0, 4 IR + 4 IT contexts, quirks 0x11
[ 2.634831] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 955A35BBE3FC4E5AFC81486654AEDFB7
[ 2.634839] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[ 2.634883] e1000e 0000:00:19.0 eth0: MAC: 6, PHY: 6, PBA No: 1008FF-0FF
[ 2.689350] ata5: SATA link down (SStatus 0 SControl 300)
[ 2.689455] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.707716] ata3.00: ACPI cmd ef/EEA8ACFF83CCEDB2A7FBAA751E7F7195 (SET FEATURES) succeeded
[ 2.707723] ata3.00: ACPI cmd f5/ADA4592E35B8742A2F73BD5EE2E13B2A (SECURITY FREEZE LOCK) filtered out
[ 2.707727] ata3.00: ACPI cmd ef/CDAFD4DDA34B62B84EC8618743A6934C (SET FEATURES) filtered out
[ 2.719983] ata3.00: ATA-8: KINGSTON SV300S37A120G, 521ABBF0, max UDMA/133
[ 2.734110] ata3.00: ATA Identify Device Log not supported
[ 2.734117] ata3.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 32), AA
[ 2.746915] ata3.00: ACPI cmd ef/EEA8ACFF83CCEDB2A7FBAA751E7F7195 (SET FEATURES) succeeded
[ 2.746926] ata3.00: ACPI cmd f5/ADA4592E35B8742A2F73BD5EE2E13B2A (SECURITY FREEZE LOCK) filtered out
[ 2.746933] ata3.00: ACPI cmd ef/CDAFD4DDA34B62B84EC8618743A6934C (SET FEATURES) filtered out
[ 2.774106] ata3.00: ATA Identify Device Log not supported
[ 2.774111] ata3.00: configured for UDMA/133
[ 2.774344] scsi 2:0:0:0: Direct-Access ATA KINGSTON SV300S3 BBF0 PQ: 0 ANSI: 5
[ 2.775037] sd 2:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB)
[ 2.775061] sd 2:0:0:0: [sda] Write Protect is off
[ 2.775065] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.775103] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.775247] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 2.787105] sda: sda1
[ 2.802809] sd 2:0:0:0: [sda] Attached SCSI disk
[ 2.812924] e1000e 0000:00:19.0 enp0s25: renamed from eth0
[ 2.899401] Console: switching to colour dummy device 80x25
[ 2.899483] nouveau 0000:01:00.0: vgaarb: deactivate vga console
[ 2.899550] nouveau 0000:01:00.0: NVIDIA G86 (086900a2)
[ 2.921206] nouveau 0000:01:00.0: bios: version 60.86.3e.00.00
[ 2.944223] nouveau 0000:01:00.0: fb: 128 MiB GDDR3
[ 2.962463] firewire_core 0000:15:00.1: created device fw0: GUID 00061b032a255a1c, S400
[ 3.023183] nouveau 0000:01:00.0: DRM: VRAM: 128 MiB
[ 3.023189] nouveau 0000:01:00.0: DRM: GART: 1048576 MiB
[ 3.023193] nouveau 0000:01:00.0: DRM: TMDS table version 2.0
[ 3.023196] nouveau 0000:01:00.0: DRM: DCB version 4.0
[ 3.023199] nouveau 0000:01:00.0: DRM: DCB outp 00: 01000323 00010034
[ 3.023203] nouveau 0000:01:00.0: DRM: DCB outp 01: 02811300 00000028
[ 3.023206] nouveau 0000:01:00.0: DRM: DCB outp 02: 02822312 00010030
[ 3.023209] nouveau 0000:01:00.0: DRM: DCB outp 03: 014333f1 0080c080
[ 3.023212] nouveau 0000:01:00.0: DRM: DCB conn 00: 0040
[ 3.023215] nouveau 0000:01:00.0: DRM: DCB conn 01: 0100
[ 3.023217] nouveau 0000:01:00.0: DRM: DCB conn 02: 1231
[ 3.023220] nouveau 0000:01:00.0: DRM: DCB conn 03: 0311
[ 3.026367] nouveau 0000:01:00.0: DRM: MM: using CRYPT for buffer copies
[ 3.027320] nouveau 0000:01:00.0: DRM: failed to create encoder 0/1/0: -19
[ 3.027325] nouveau 0000:01:00.0: DRM: TV-1 has no encoders, removing
[ 3.070490] nouveau 0000:01:00.0: DRM: allocated 1680x1050 fb: 0x50000, bo (____ptrval____)
[ 3.070625] fbcon: nouveaudrmfb (fb0) is primary device
[ 3.760167] input: AlpsPS/2 ALPS DualPoint Stick as /devices/platform/i8042/serio1/input/input7
[ 3.790544] input: AlpsPS/2 ALPS DualPoint TouchPad as /devices/platform/i8042/serio1/input/input6
[ 4.387503] Console: switching to colour frame buffer device 210x65
[ 4.390276] nouveau 0000:01:00.0: [drm] fb0: nouveaudrmfb frame buffer device
[ 4.398906] [drm] Initialized nouveau 1.3.1 20120801 for 0000:01:00.0 on minor 0
[ 4.621891] random: [pango] FcInit: uninitialized urandom read (8 bytes read)
[ 4.622137] random: [pango] FcInit: uninitialized urandom read (8 bytes read)
[ 4.753024] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.
[ 5.838654] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro. Quota mode: none.
[ 5.841779] lp: driver loaded but no devices found
[ 5.856904] ppdev: user-space parallel port driver
[ 6.184495] loop0: detected capacity change from 0 to 18352
[ 6.190578] loop1: detected capacity change from 0 to 8
[ 6.209779] loop2: detected capacity change from 0 to 238984
[ 6.234636] loop3: detected capacity change from 0 to 300944
[ 6.255648] loop4: detected capacity change from 0 to 129584
[ 6.260967] loop5: detected capacity change from 0 to 112704
[ 6.288966] loop6: detected capacity change from 0 to 187776
[ 6.293594] loop7: detected capacity change from 0 to 709280
[ 6.318774] loop8: detected capacity change from 0 to 16232
[ 6.339070] loop10: detected capacity change from 0 to 16224
[ 6.349633] loop9: detected capacity change from 0 to 32
[ 6.354718] loop11: detected capacity change from 0 to 32
[ 6.367097] loop12: detected capacity change from 0 to 176648
[ 6.372568] loop13: detected capacity change from 0 to 27680
[ 7.314398] random: crng init done
[ 7.314403] random: 136 urandom warning(s) missed due to ratelimiting
[ 8.057896] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 8.078185] yenta_cardbus 0000:15:00.0: CardBus bridge found [17aa:20c6] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 8.119934] r592: driver successfully loaded
[ 8.213160] yenta_cardbus 0000:15:00.0: ISA IRQ mask 0x0cb8, PCI irq 16
[ 8.213172] yenta_cardbus 0000:15:00.0: Socket status: 30000006
[ 8.213180] yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge window: [io 0x8000-0xbfff] yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge window: [mem 0xf8100000-0xfbffffff] pcmcia_socket pcmcia_socket0: cs: memory probe 0xf8100000-0xfbffffff:
[ 8.213193] excluding 0xf8100000-0xf84effff
[ 8.213205] yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge window: [mem 0xf4000000-0xf7ffffff 64bit pref] pcmcia_socket pcmcia_socket0: cs: memory probe 0xf4000000-0xf7ffffff:
[ 8.213214] excluding 0xf4000000-0xf7ffffff
[ 8.282442] Non-volatile memory driver v1.3
[ 8.404464] thinkpad_acpi: ThinkPad ACPI Extras v0.26
[ 8.404471] thinkpad_acpi: http://ibm-acpi.sf.net/
[ 8.404472] thinkpad_acpi: ThinkPad BIOS 7KETC9WW (2.29 ), EC 7KHT24WW-1.08
[ 8.404474] thinkpad_acpi: Lenovo ThinkPad R61, model 8918DEG
[ 8.475531] thinkpad_acpi: ACPI backlight control delay disabled
[ 8.475897] thinkpad_acpi: radio switch found; radios are disabled
[ 8.475930] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
[ 8.475932] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
[ 8.479815] r852: driver loaded successfully
[ 8.670550] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is blocked
[ 8.731240] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
[ 8.765596] thinkpad_acpi: battery 1 registered (start 0, stop 0)
[ 8.765611] ACPI: battery: new extension: ThinkPad Battery Extension
[ 8.765689] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input8
[ 8.934800] intel_powerclamp: No package C-state available
[ 8.978230] intel_powerclamp: No package C-state available
[ 10.100156] iwl4965: Intel(R) Wireless WiFi 4965 driver for Linux, in-tree:
[ 10.100162] iwl4965: Copyright(c) BDC6-FA10 Intel Corporation
[ 10.100240] iwl4965 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 10.100488] iwl4965 0000:03:00.0: Detected Intel(R) Wireless WiFi Link 4965AGN, REV=0x4
[ 10.143445] iwl4965 0000:03:00.0: device EEPROM VER=0x36, CALIB=0x5
[ 10.157859] iwl4965 0000:03:00.0: Tunable channels: 13 802.11bg, 19 802.11a channels
[ 10.172578] iwl4965 0000:03:00.0: loaded firmware version XXX.XXX.XXX.XXX
[ 10.172890] ieee80211 phy0: Selected rate control algorithm 'iwl-4965-rs'
[ 11.029904] snd_hda_intel 0000:00:1b.0: probe_mask set to 0x1 for device 17aa:20ac
[ 11.489740] snd_hda_codec_analog hdaudioC0D0: autoconfig for AD1984: line_outs=1 (0x12/0x0/0x0/0x0/0x0) type:speaker
[ 11.489750] snd_hda_codec_analog hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 11.489754] snd_hda_codec_analog hdaudioC0D0: hp_outs=1 (0x11/0x0/0x0/0x0/0x0)
[ 11.489757] snd_hda_codec_analog hdaudioC0D0: mono: mono_out=0x0
[ 11.489760] snd_hda_codec_analog hdaudioC0D0: dig-out=0x1b/0x0
[ 11.489762] snd_hda_codec_analog hdaudioC0D0: inputs:
[ 11.489764] snd_hda_codec_analog hdaudioC0D0: Internal Mic=0x15
[ 11.489767] snd_hda_codec_analog hdaudioC0D0: Mic=0x14
[ 11.489769] snd_hda_codec_analog hdaudioC0D0: Dock Mic=0x1c
[ 11.544277] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 11.549210] input: HDA Intel Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 11.550068] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff:
[ 11.550081] excluding 0xc0000-0xd3fff 0xe0000-0xfffff
[ 11.550115] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff:
[ 11.550126] excluding 0xa0000000-0xa0ffffff
[ 11.550152] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff:
[ 11.550163] excluding 0x60000000-0x60ffffff
[ 11.562558] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 11.637086] iwl4965 0000:03:00.0 wls3: renamed from wlan0
[ 31.516513] loop14: detected capacity change from 0 to 8
[ 32.584593] thinkpad_acpi: acpi_evalf(BCTG, dd, ...) failed: AE_NOT_FOUND
[ 32.584608] ACPI: \_SB_.PCI0.LPC_.EC__.HKEY: BCTG: evaluate failed
[ 32.642757] thinkpad_ec: loading out-of-tree module taints kernel.
[ 32.642826] thinkpad_ec: module verification failed: signature and/or required key missing - tainting kernel
[ 32.643292] thinkpad_ec: thinkpad_ec 0.43 loaded.
[ 32.644656] tp_smapi 0.43 loading...
[ 32.644903] tp_smapi successfully loaded (smapi_port=0xb2).
[ 36.120926] cups-proxyd[1641]: segfault at 18 ip 0000560967e74d6e sp 00007fff90aa98c0 error 4 in cups-proxyd[560967e71000+7000] Code: 00 00 00 41 54 55 48 89 fd 53 0f 85 ed 00 00 00 48 8d 1d 5f 42 00 00 48 63 45 1c 48 8d 3d 69 3d 00 00 48 c1 e0 05 48 03 45 08 <48> 8b 50 18 8b 70 14 e8 06 d0 ff ff 44 8b 65 18 48 89 c7 45 85 e4
[ 52.119763] pool-fprintd[1304]: segfault at 7fdec0013520 ip 00007fddd81dc624 sp 00007fddd4e15540 error 4 in libfprint-2.so.2.0.0[7fddd818b000+52000] Code: 89 ff 31 db 4a 8d 2c ed 00 00 00 00 48 8b 40 20 4a 8b 14 e8 e8 7d fe ff ff 41 8b 06 85 c0 7e 2a 66 0f 1f 44 00 00 49 8b 46 08 <49> 8b 3c dc 4c 89 fe 41 8b 4e 04 48 8b 14 d8 48 01 ef 48 83 c3 01
[ 74.694453] usb 6-2: new full-speed USB device number 2 using uhci_hcd
[ 74.883474] usb 6-2: New USB device found, idVendor=0af0, idProduct=6701, bcdDevice= 0.00
[ 74.883493] usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=...
[ 74.883501] usb 6-2: Product: Globetrotter HSDPA Modem
[ 74.883507] usb 6-2: Manufacturer: Option N.V.
[ 74.883513] usb 6-2: SerialNumber: ...
[ 75.556850] usbcore: registered new interface driver usbserial_generic
[ 75.556892] usbserial: USB Serial support registered for generic
[ 75.569824] usbcore: registered new interface driver option
[ 75.570012] usbserial: USB Serial support registered for GSM modem (1-port)
[ 75.570111] option 6-2:1.0: GSM modem (1-port) converter detected
[ 75.573619] usb 6-2: GSM modem (1-port) converter now attached to ttyUSB0
[ 75.573793] option 6-2:1.1: GSM modem (1-port) converter detected
[ 75.574042] usb 6-2: GSM modem (1-port) converter now attached to ttyUSB1
[ 75.574149] option 6-2:1.2: GSM modem (1-port) converter detected
[ 75.574320] usb 6-2: GSM modem (1-port) converter now attached to ttyUSB2
[ 127.198544] show_signal_msg: 2 callbacks suppressed
[ 127.198551] pool-fprintd[3135]: segfault at 7fb7500112b0 ip 00007fb6693c7624 sp 00007fb666000540 error 4 in libfprint-2.so.2.0.0[7fb669376000+52000] Code: 89 ff 31 db 4a 8d 2c ed 00 00 00 00 48 8b 40 20 4a 8b 14 e8 e8 7d fe ff ff 41 8b 06 85 c0 7e 2a 66 0f 1f 44 00 00 49 8b 46 08 <49> 8b 3c dc 4c 89 fe 41 8b 4e 04 48 8b 14 d8 48 01 ef 48 83 c3 01
[ 279.729307] iwl4965 0000:03:00.0: RF_KILL bit toggled to enable radio.
[ 279.729323] iwl4965 0000:03:00.0: On demand firmware reload
[ 279.729401] ieee80211 phy0: Hardware restart was requested
[ 280.390417] usb 3-1: new full-speed USB device number 3 using uhci_hcd
[ 280.585471] usb 3-1: New USB device found, idVendor=0a5c, idProduct=2110, bcdDevice= 1.00
[ 280.585484] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=...
[ 280.585489] usb 3-1: Product: BCM2045B
[ 280.585493] usb 3-1: Manufacturer: Broadcom Corp
[ 280.729034] Bluetooth: Core ver 2.22
[ 280.729257] NET: Registered PF_BLUETOOTH protocol family
[ 280.729260] Bluetooth: HCI device and connection manager initialized
[ 280.730306] Bluetooth: HCI socket layer initialized
[ 280.730315] Bluetooth: L2CAP socket layer initialized
[ 280.730331] Bluetooth: SCO socket layer initialized
[ 280.755929] usbcore: registered new interface driver btusb
[ 280.955714] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 280.955720] Bluetooth: BNEP filters: protocol multicast
[ 280.955727] Bluetooth: BNEP socket layer initialized
[ 280.984819] NET: Registered PF_ALG protocol family
[ 281.178434] Bluetooth: RFCOMM TTY layer initialized
[ 281.178450] Bluetooth: RFCOMM socket layer initialized
[ 281.178463] Bluetooth: RFCOMM ver 1.11
[ 282.244797] wls3: authenticate with 00DEEBD20CD9DA97D5069563857A0AD7
[ 282.253812] wls3: send auth to 00DEEBD20CD9DA97D5069563857A0AD7 (try 1/3)
[ 282.255859] wls3: authenticated
[ 282.256154] iwl4965 0000:03:00.0 wls3: disabling HT/VHT/HE as WMM/QoS is not supported by the AP
[ 282.256161] wls3: waiting for beacon from 00DEEBD20CD9DA97D5069563857A0AD7
[ 282.330408] wls3: associate with 00DEEBD20CD9DA97D5069563857A0AD7 (try 1/3)
[ 282.333161] wls3: RX AssocResp from 00DEEBD20CD9DA97D5069563857A0AD7 (capab=0x31 status=0 aid=8)
[ 282.357826] wls3: associated
[ 282.562660] IPv6: ADDRCONF(NETDEV_CHANGE): wls3: link becomes ready
[ 282.564626] iwl4965 0000:03:00.0: Enabling power save might cause firmware crashes
[ 327.970523] usb 6-2: USB disconnect, device number 2
[ 327.972586] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0
[ 327.972624] option 6-2:1.0: device disconnected
[ 327.977408] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1
[ 327.977452] option 6-2:1.1: device disconnected
[ 327.978650] option1 ttyUSB2: GSM modem (1-port) converter now disconnected from ttyUSB2
[ 327.978693] option 6-2:1.2: device disconnected
[ 1050.494441] usb 6-2: new full-speed USB device number 3 using uhci_hcd
[ 1050.682481] usb 6-2: New USB device found, idVendor=0af0, idProduct=6701, bcdDevice= 0.00
[ 1050.682490] usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=...
[ 1050.682493] usb 6-2: Product: Globetrotter HSDPA Modem
[ 1050.682496] usb 6-2: Manufacturer: Option N.V.
[ 1050.682498] usb 6-2: SerialNumber: ...
[ 1050.689325] option 6-2:1.0: GSM modem (1-port) converter detected
[ 1050.689598] usb 6-2: GSM modem (1-port) converter now attached to ttyUSB0
[ 1050.691537] option 6-2:1.1: GSM modem (1-port) converter detected
[ 1050.691718] usb 6-2: GSM modem (1-port) converter now attached to ttyUSB1
[ 1050.693528] option 6-2:1.2: GSM modem (1-port) converter detected
[ 1050.694099] usb 6-2: GSM modem (1-port) converter now attached to ttyUSB2
[ 1237.630619] usb 6-2: USB disconnect, device number 3
[ 1237.632719] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0
[ 1237.632796] option 6-2:1.0: device disconnected
[ 1237.633374] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1
[ 1237.633441] option 6-2:1.1: device disconnected
[ 1237.634675] option1 ttyUSB2: GSM modem (1-port) converter now disconnected from ttyUSB2
[ 1237.634736] option 6-2:1.2: device disconnected
[ 1243.594483] usb 6-2: new full-speed USB device number 4 using uhci_hcd
[ 1243.780523] usb 6-2: New USB device found, idVendor=0af0, idProduct=6701, bcdDevice= 0.00
[ 1243.780541] usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=...
[ 1243.780549] usb 6-2: Product: Globetrotter HSDPA Modem
[ 1243.780555] usb 6-2: Manufacturer: Option N.V.
[ 1243.780560] usb 6-2: SerialNumber: ...
[ 1243.790589] option 6-2:1.0: GSM modem (1-port) converter detected
[ 1243.791040] usb 6-2: GSM modem (1-port) converter now attached to ttyUSB0
[ 1243.793578] option 6-2:1.1: GSM modem (1-port) converter detected
[ 1243.793954] usb 6-2: GSM modem (1-port) converter now attached to ttyUSB1
[ 1243.795586] option 6-2:1.2: GSM modem (1-port) converter detected
[ 1243.795968] usb 6-2: GSM modem (1-port) converter now attached to ttyUSB2
[ 1556.806587] usb 6-2: USB disconnect, device number 4
[ 1556.808766] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0
[ 1556.808840] option 6-2:1.0: device disconnected
[ 1556.809353] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1
[ 1556.809420] option 6-2:1.1: device disconnected
[ 1556.810720] option1 ttyUSB2: GSM modem (1-port) converter now disconnected from ttyUSB2
[ 1556.810780] option 6-2:1.2: device disconnected
[ 1612.342424] usb 1-3: new high-speed USB device number 4 using ehci-pci
[ 1612.504897] usb 1-3: New USB device found, idVendor=12d1, idProduct=1446, bcdDevice= 0.00
[ 1612.504914] usb 1-3: New USB device strings: Mfr=3, Product=2, SerialNumber=...
[ 1612.504922] usb 1-3: Product: HUAWEI Mobile
[ 1612.504928] usb 1-3: Manufacturer: HUAWEI Technology
[ 1612.639527] usb-storage 1-3:1.0: USB Mass Storage device detected
[ 1612.647089] scsi host5: usb-storage 1-3:1.0
[ 1612.648041] usb-storage 1-3:1.1: USB Mass Storage device detected
[ 1612.652912] scsi host6: usb-storage 1-3:1.1
[ 1612.655337] usbcore: registered new interface driver usb-storage
[ 1612.664553] usbcore: registered new interface driver uas
[ 1613.313361] usb 1-3: USB disconnect, device number 4
[ 1617.354431] usb 1-3: new high-speed USB device number 5 using ehci-pci
[ 1617.521008] usb 1-3: New USB device found, idVendor=12d1, idProduct=1436, bcdDevice= 0.00
[ 1617.521027] usb 1-3: New USB device strings: Mfr=4, Product=3, SerialNumber=...
[ 1617.521035] usb 1-3: Product: HUAWEI Mobile
[ 1617.521041] usb 1-3: Manufacturer: HUAWEI Technology
[ 1617.526912] option 1-3:1.0: GSM modem (1-port) converter detected
[ 1617.527378] usb 1-3: GSM modem (1-port) converter now attached to ttyUSB0
[ 1617.527991] usb-storage 1-3:1.1: USB Mass Storage device detected
[ 1617.542850] usb-storage 1-3:1.2: USB Mass Storage device detected
[ 1617.562799] option 1-3:1.3: GSM modem (1-port) converter detected
[ 1617.563025] usb 1-3: GSM modem (1-port) converter now attached to ttyUSB1
[ 1617.563194] option 1-3:1.4: GSM modem (1-port) converter detected
[ 1617.563366] usb 1-3: GSM modem (1-port) converter now attached to ttyUSB2
[ 1617.563549] usb-storage 1-3:1.5: USB Mass Storage device detected
[ 1617.570535] scsi host5: usb-storage 1-3:1.5
[ 1617.570798] usb-storage 1-3:1.6: USB Mass Storage device detected
[ 1617.573317] scsi host6: usb-storage 1-3:1.6
[ 1617.786253] cdc_ether 1-3:1.1 wwan0: register 'cdc_ether' at usb-0000:00:1a.7-3, Mobile Broadband Network Device, D93E58B014FBDC8E9234BEDACD41AA65
[ 1617.787906] usbcore: registered new interface driver cdc_ether
[ 1618.089499] cdc_ether 1-3:1.1 wwx0250f3000000: renamed from wwan0
[ 1618.611651] scsi 6:0:0:0: Direct-Access HUAWEI SD Storage 2.31 PQ: 0 ANSI: 2
[ 1618.611755] scsi 5:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 2
[ 1618.612651] scsi 6:0:0:0: Attached scsi generic sg2 type 0
[ 1618.615638] sd 6:0:0:0: [sdb] Media removed, stopped polling
[ 1618.622654] sr 5:0:0:0: [sr1] scsi-1 drive
[ 1618.626261] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[ 1618.626894] sr 5:0:0:0: Attached scsi CD-ROM sr1
[ 1618.627708] sr 5:0:0:0: Attached scsi generic sg3 type 5
[ 1663.911755] iwl4965 0000:03:00.0: RF_KILL bit toggled to disable radio.
[ 1663.911933] wls3: deauthenticating from 00DEEBD20CD9DA97D5069563857A0AD7 by local choice (Reason: 3=DEAUTH_LEAVING)
[ 1663.917383] iwl4965 0000:03:00.0: Not sending command - RF KILL
[ 1663.917397] iwl4965 0000:03:00.0: Error sending C_REM_STA: enqueue_hcmd failed: -5
[ 1663.917412] iwl4965 0000:03:00.0: Error removing station 00DEEBD20CD9DA97D5069563857A0AD7
[ 1663.917589] iwl4965 0000:03:00.0: Not sending command - RF KILL
[ 1663.917596] iwl4965 0000:03:00.0: Error sending C_QOS_PARAM: enqueue_hcmd failed: -5
[ 1663.917609] iwl4965 0000:03:00.0: Not sending command - RF KILL
[ 1663.917615] iwl4965 0000:03:00.0: Error sending C_RXON: enqueue_hcmd failed: -5
[ 1663.917624] iwl4965 0000:03:00.0: Error setting new RXON (-5)
[ 1663.917633] iwl4965 0000:03:00.0: Not sending command - RF KILL
[ 1663.917639] iwl4965 0000:03:00.0: Error sending C_RXON_ASSOC: enqueue_hcmd failed: -5
[ 1663.917656] iwl4965 0000:03:00.0: Not sending command - RF KILL
[ 1663.917662] iwl4965 0000:03:00.0: Error sending C_RXON_ASSOC: enqueue_hcmd failed: -5
[ 1663.917680] iwl4965 0000:03:00.0: Not sending command - RF KILL
[ 1663.917686] iwl4965 0000:03:00.0: Error sending C_RXON: enqueue_hcmd failed: -5
[ 1663.917694] iwl4965 0000:03:00.0: Error setting new RXON (-5)
[ 1663.917730] iwl4965 0000:03:00.0: Not sending command - RF KILL
[ 1663.917736] iwl4965 0000:03:00.0: Error sending C_LEDS: enqueue_hcmd failed: -5
[ 1663.917757] iwl4965 0000:03:00.0: Not sending command - RF KILL
[ 1663.917763] iwl4965 0000:03:00.0: Error sending C_RXON: enqueue_hcmd failed: -5
[ 1663.917771] iwl4965 0000:03:00.0: Error setting new RXON (-5)
[ 1663.954649] iwl4965 0000:03:00.0: Not sending command - RF KILL
[ 1663.954659] iwl4965 0000:03:00.0: Error sending C_RXON: enqueue_hcmd failed: -5
[ 1663.954668] iwl4965 0000:03:00.0: Error setting new RXON (-5)
[ 1664.062477] usb 3-1: USB disconnect, device number 3
[ 1802.671939] PPP BSD Compression module registered
[ 1802.681613] PPP Deflate Compression module registered
[ 1975.618711] usb 1-3: USB disconnect, device number 5
[ 1975.623282] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0
[ 1975.623354] option 1-3:1.0: device disconnected
[ 1975.623574] cdc_ether 1-3:1.1 wwx0250f3000000: unregister 'cdc_ether' usb-0000:00:1a.7-3, Mobile Broadband Network Device
[ 1975.684261] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1
[ 1975.684301] option 1-3:1.3: device disconnected
[ 1975.686347] option1 ttyUSB2: GSM modem (1-port) converter now disconnected from ttyUSB2
[ 1975.686430] option 1-3:1.4: device disconnected
[ 2030.074498] usb 6-2: new full-speed USB device number 5 using uhci_hcd
[ 2030.260540] usb 6-2: New USB device found, idVendor=0af0, idProduct=6701, bcdDevice= 0.00
[ 2030.260560] usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=...
[ 2030.260568] usb 6-2: Product: Globetrotter HSDPA Modem
[ 2030.260575] usb 6-2: Manufacturer: Option N.V.
[ 2030.260580] usb 6-2: SerialNumber: ...
[ 2030.268594] option 6-2:1.0: GSM modem (1-port) converter detected
[ 2030.268955] usb 6-2: GSM modem (1-port) converter now attached to ttyUSB0
[ 2030.270749] option 6-2:1.1: GSM modem (1-port) converter detected
[ 2030.271527] usb 6-2: GSM modem (1-port) converter now attached to ttyUSB1
[ 2030.273580] option 6-2:1.2: GSM modem (1-port) converter detected
[ 2030.273830] usb 6-2: GSM modem (1-port) converter now attached to ttyUSB2
[ 2722.722332] iwl4965 0000:03:00.0: RF_KILL bit toggled to enable radio.
[ 2722.722349] iwl4965 0000:03:00.0: On demand firmware reload
[ 2722.722738] ieee80211 phy0: Hardware restart was requested
[ 2723.358401] usb 3-1: new full-speed USB device number 4 using uhci_hcd
[ 2723.555499] usb 3-1: New USB device found, idVendor=0a5c, idProduct=2110, bcdDevice= 1.00
[ 2723.555511] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=...
[ 2723.555517] usb 3-1: Product: BCM2045B
[ 2723.555521] usb 3-1: Manufacturer: Broadcom Corp
[ 2725.207719] wls3: authenticate with 00DEEBD20CD9DA97D5069563857A0AD7
[ 2725.207841] wls3: send auth to 00DEEBD20CD9DA97D5069563857A0AD7 (try 1/3)
[ 2725.209648] wls3: authenticated
[ 2725.209868] iwl4965 0000:03:00.0 wls3: disabling HT/VHT/HE as WMM/QoS is not supported by the AP
[ 2725.210548] wls3: associate with 00DEEBD20CD9DA97D5069563857A0AD7 (try 1/3)
[ 2725.213185] wls3: RX AssocResp from 00DEEBD20CD9DA97D5069563857A0AD7 (capab=0x31 status=0 aid=8)
[ 2725.243468] wls3: associated
[ 2725.574618] IPv6: ADDRCONF(NETDEV_CHANGE): wls3: link becomes ready
[ 2916.094642] usb 6-2: USB disconnect, device number 5
[ 2916.096634] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0
[ 2916.096709] option 6-2:1.0: device disconnected
[ 2916.097605] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1
[ 2916.097677] option 6-2:1.1: device disconnected
[ 2916.098971] option1 ttyUSB2: GSM modem (1-port) converter now disconnected from ttyUSB2
[ 2916.099036] option 6-2:1.2: device disconnected
[ 2929.326485] usb 6-2: new full-speed USB device number 6 using uhci_hcd
[ 2929.516535] usb 6-2: New USB device found, idVendor=0af0, idProduct=6701, bcdDevice= 0.00
[ 2929.516553] usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=...
[ 2929.516561] usb 6-2: Product: Globetrotter HSDPA Modem
[ 2929.516567] usb 6-2: Manufacturer: Option N.V.
[ 2929.516572] usb 6-2: SerialNumber: ...
[ 2929.525588] option 6-2:1.0: GSM modem (1-port) converter detected
[ 2929.526084] usb 6-2: GSM modem (1-port) converter now attached to ttyUSB0
[ 2929.528580] option 6-2:1.1: GSM modem (1-port) converter detected
[ 2929.528923] usb 6-2: GSM modem (1-port) converter now attached to ttyUSB1
[ 2929.530575] option 6-2:1.2: GSM modem (1-port) converter detected
[ 2929.530950] usb 6-2: GSM modem (1-port) converter now attached to ttyUSB2
[ 3892.222578] usb 6-2: USB disconnect, device number 6
[ 3892.226573] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0
[ 3892.226615] option 6-2:1.0: device disconnected
[ 3892.229354] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1
[ 3892.229392] option 6-2:1.1: device disconnected
[ 3892.231109] option1 ttyUSB2: GSM modem (1-port) converter now disconnected from ttyUSB2
[ 3892.231138] option 6-2:1.2: device disconnected
[ 3898.118517] usb 6-2: new full-speed USB device number 7 using uhci_hcd
[ 3898.301616] usb 6-2: New USB device found, idVendor=0af0, idProduct=6701, bcdDevice= 0.00
[ 3898.301644] usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=...
[ 3898.301652] usb 6-2: Product: Globetrotter HSDPA Modem
[ 3898.301661] usb 6-2: Manufacturer: Option N.V.
[ 3898.301667] usb 6-2: SerialNumber: ...
[ 3898.309623] option 6-2:1.0: GSM modem (1-port) converter detected
[ 3898.310029] usb 6-2: GSM modem (1-port) converter now attached to ttyUSB0
[ 3898.311592] option 6-2:1.1: GSM modem (1-port) converter detected
[ 3898.312375] usb 6-2: GSM modem (1-port) converter now attached to ttyUSB1
[ 3898.314761] option 6-2:1.2: GSM modem (1-port) converter detected
[ 3898.315076] usb 6-2: GSM modem (1-port) converter now attached to ttyUSB2
[ 4221.367993] wls3: deauthenticating from 00DEEBD20CD9DA97D5069563857A0AD7 by local choice (Reason: 3=DEAUTH_LEAVING)