Probe #0b59eacbd3 of ASRock B150M Pro4 Desktop Computer
Log: dmesg.1
[ 0.667028] device-mapper: uevent: version 1.0.3
[ 0.667126] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: XXX@XXX
[ 1.038744] xor: automatically using best checksumming function avx
[ 1.063691] raid6: avx2x4 gen() 35528 MB/s
[ 1.088691] raid6: avx2x2 gen() 39038 MB/s
[ 1.113691] raid6: avx2x1 gen() 35786 MB/s
[ 1.113692] raid6: using algorithm avx2x2 gen() 39038 MB/s
[ 1.136691] raid6: .... xor() 21647 MB/s, rmw enabled
[ 1.136692] raid6: using avx2x2 recovery algorithm
[ 1.187699] Btrfs loaded, crc32c=crc32c-intel, zoned=yes, fsverity=yes
[ 1.203041] ACPI: bus type USB registered
[ 1.203059] usbcore: registered new interface driver usbfs
[ 1.203064] usbcore: registered new interface driver hub
[ 1.203070] usbcore: registered new device driver usb
[ 1.335703] tsc: Refined TSC clocksource calibration: 3503.999 MHz
[ 1.335708] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x3282124c47b, max_idle_ns: 440795239402 ns
[ 1.335717] clocksource: Switched to clocksource tsc
[ 1.645044] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
[ 1.645062] ACPI: button: Sleep Button [SLPB] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 1.645099] ACPI: button: Power Button [PWRB] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 1.648712] ACPI: button: Power Button [PWRF] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.673063] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 1.709810] Linux agpgart interface v0.103
[ 1.735855] libata version 3.00 loaded.
[ 1.736040] cryptd: max_cpu_qlen set to 1000
[ 1.747804] AVX2 version of gcm_enc/dec engaged.
[ 1.747831] AES CTR mode by8 optimization enabled
[ 1.767340] ahci 0000:00:17.0: version 3.0
[ 1.768629] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.768633] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 1.769700] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000001109810
[ 1.769848] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.769851] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 1.769852] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[ 1.769891] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.02
[ 1.769893] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=...
[ 1.769894] usb usb1: Product: xHCI Host Controller
[ 1.769896] usb usb1: Manufacturer: Linux 6.2.6-desktop-1omv2390 xhci-hcd
[ 1.769897] usb usb1: SerialNumber: ...
[ 1.770018] hub 1-0:1.0: USB hub found
[ 1.770030] hub 1-0:1.0: 12 ports detected
[ 1.771080] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.02
[ 1.771083] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=...
[ 1.771084] usb usb2: Product: xHCI Host Controller
[ 1.771085] usb usb2: Manufacturer: Linux 6.2.6-desktop-1omv2390 xhci-hcd
[ 1.771086] usb usb2: SerialNumber: ...
[ 1.771156] hub 2-0:1.0: USB hub found
[ 1.771164] hub 2-0:1.0: 6 ports detected
[ 1.777591] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
[ 1.777595] ahci 0000:00:17.0: flags: 64bit ncq sntf led clo only pio slum part ems deso sadm sds apst
[ 1.806141] scsi host0: ahci
[ 1.810182] scsi host1: ahci
[ 1.810503] ACPI: bus type drm_connector registered
[ 1.819768] scsi host2: ahci
[ 1.829847] scsi host3: ahci
[ 1.836836] scsi host4: ahci
[ 1.847740] scsi host5: ahci
[ 1.847779] ata1: SATA max UDMA/133 abar m2048@0xdf14b000 port 0xdf14b100 irq 125
[ 1.847782] ata2: SATA max UDMA/133 abar m2048@0xdf14b000 port 0xdf14b180 irq 125
[ 1.847783] ata3: SATA max UDMA/133 abar m2048@0xdf14b000 port 0xdf14b200 irq 125
[ 1.847785] ata4: SATA max UDMA/133 abar m2048@0xdf14b000 port 0xdf14b280 irq 125
[ 1.847786] ata5: SATA max UDMA/133 abar m2048@0xdf14b000 port 0xdf14b300 irq 125
[ 1.847787] ata6: SATA max UDMA/133 abar m2048@0xdf14b000 port 0xdf14b380 irq 125
[ 1.956374] MXM: GUID detected in BIOS
[ 1.956633] nouveau 0000:01:00.0: vgaarb: deactivate vga console
[ 1.961357] Console: switching to colour dummy device 80x25
[ 2.010694] usb 1-3: new high-speed USB device number 2 using xhci_hcd
[ 2.137791] usb 1-3: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice= 9.01
[ 2.137795] usb 1-3: New USB device strings: Mfr=0, Product=1, SerialNumber=...
[ 2.137796] usb 1-3: Product: USB2.0 Hub
[ 2.138428] hub 1-3:1.0: USB hub found
[ 2.139223] hub 1-3:1.0: 4 ports detected
[ 2.156754] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 2.156769] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 2.157102] ata2.00: supports DRM functions and may not be fully accessible
[ 2.157103] ata2.00: ATA-10: Crucial_CT250MX200SSD1, MU01, max UDMA/133
[ 2.157133] ata3.00: ATA-10: WDC WD40EZRZ-75GXCB0, 80.00A80, max UDMA/133
[ 2.157598] ata3.00: 7814037168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[ 2.157751] ata1: SATA link down (SStatus 4 SControl 300)
[ 2.158420] ata3.00: configured for UDMA/133
[ 2.160071] ata2.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[ 2.160704] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.161793] ata4.00: ATA-8: ST31000528AS, CC38, max UDMA/133
[ 2.161795] ata4.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32)
[ 2.163061] ata4.00: configured for UDMA/133
[ 2.165330] ata2.00: Features: Trust Dev-Sleep NCQ-sndrcv NCQ-prio
[ 2.165578] ata2.00: supports DRM functions and may not be fully accessible
[ 2.165754] ata6: SATA link down (SStatus 4 SControl 300)
[ 2.165769] ata5: SATA link down (SStatus 4 SControl 300)
[ 2.174625] ata2.00: configured for UDMA/133
[ 2.174670] scsi 1:0:0:0: Direct-Access ATA Crucial_CT250MX2 MU01 PQ: 0 ANSI: 5
[ 2.174854] scsi 2:0:0:0: Direct-Access ATA WDC WD40EZRZ-75G 0A80 PQ: 0 ANSI: 5
[ 2.174967] scsi 3:0:0:0: Direct-Access ATA ST31000528AS CC38 PQ: 0 ANSI: 5
[ 2.197479] ata2.00: Enabling discard_zeroes_data
[ 2.197488] sd 1:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/233 GiB)
[ 2.197490] sd 1:0:0:0: [sda] 4096-byte physical blocks
[ 2.197495] sd 1:0:0:0: [sda] Write Protect is off
[ 2.197496] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.197503] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.197517] sd 1:0:0:0: [sda] Preferred minimum I/O size 4096 bytes
[ 2.197604] ata2.00: Enabling discard_zeroes_data
[ 2.199857] sd 2:0:0:0: [sdb] 7814037168 512-byte logical blocks: (4.00 TB/3.64 TiB)
[ 2.199859] sd 2:0:0:0: [sdb] 4096-byte physical blocks
[ 2.199864] sd 2:0:0:0: [sdb] Write Protect is off
[ 2.199865] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.199872] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.199881] sd 2:0:0:0: [sdb] Preferred minimum I/O size 4096 bytes
[ 2.199992] sd 3:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 2.199997] sd 3:0:0:0: [sdc] Write Protect is off
[ 2.199998] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 2.200005] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.200014] sd 3:0:0:0: [sdc] Preferred minimum I/O size 512 bytes
[ 2.200539] nouveau 0000:01:00.0: DRM: VRAM: 8192 MiB
[ 2.200541] nouveau 0000:01:00.0: DRM: GART: 536870912 MiB
[ 2.200543] nouveau 0000:01:00.0: DRM: BIT table 'A' not found
[ 2.200544] nouveau 0000:01:00.0: DRM: BIT table 'L' not found
[ 2.200545] nouveau 0000:01:00.0: DRM: TMDS table version 2.0
[ 2.200547] nouveau 0000:01:00.0: DRM: DCB version 4.1
[ 2.200548] nouveau 0000:01:00.0: DRM: DCB outp 00: 01000f42 00020030
[ 2.200550] nouveau 0000:01:00.0: DRM: DCB outp 01: 04811f96 04600020
[ 2.200551] nouveau 0000:01:00.0: DRM: DCB outp 02: 04011f92 00020020
[ 2.200552] nouveau 0000:01:00.0: DRM: DCB outp 03: 04822f86 04600010
[ 2.200554] nouveau 0000:01:00.0: DRM: DCB outp 04: 04022f82 00020010
[ 2.200555] nouveau 0000:01:00.0: DRM: DCB outp 06: 02033f62 00020010
[ 2.200556] nouveau 0000:01:00.0: DRM: DCB outp 07: 02844f76 04600020
[ 2.200557] nouveau 0000:01:00.0: DRM: DCB outp 08: 02044f72 00020020
[ 2.200558] nouveau 0000:01:00.0: DRM: DCB conn 00: 00001031
[ 2.200559] nouveau 0000:01:00.0: DRM: DCB conn 01: 02000146
[ 2.200560] nouveau 0000:01:00.0: DRM: DCB conn 02: 01000246
[ 2.200561] nouveau 0000:01:00.0: DRM: DCB conn 03: 00010361
[ 2.200562] nouveau 0000:01:00.0: DRM: DCB conn 04: 00020446
[ 2.204007] sda: sda1 sda2 sda3 sda4
[ 2.206227] sd 1:0:0:0: [sda] Attached SCSI disk
[ 2.212492] nouveau 0000:01:00.0: DRM: MM: using COPY for buffer copies
[ 2.286120] sdc: sdc1 sdc3 < sdc5 sdc6 sdc7 sdc8 sdc9 sdc10 sdc11 >
[ 2.286296] sd 3:0:0:0: [sdc] Attached SCSI disk
[ 2.304669] [drm] Initialized nouveau 1.3.1 20120801 for 0000:01:00.0 on minor 0
[ 2.358768] EXT4-fs (sda4): orphan cleanup on readonly fs
[ 2.358977] EXT4-fs (sda4): mounted filesystem HASH_E4F-6AD3-806C-EACF-ACD7F81D3F34 with ordered data mode. Quota mode: none.
[ 2.424696] usb 1-3.1: new full-speed USB device number 3 using xhci_hcd
[ 2.503880] usb 1-3.1: New USB device found, idVendor=1ea7, idProduct=0064, bcdDevice= 2.00
[ 2.503883] usb 1-3.1: New USB device strings: Mfr=0, Product=1, SerialNumber=...
[ 2.503885] usb 1-3.1: Product: 2.4G Mouse
[ 2.533751] fbcon: nouveaudrmfb (fb0) is primary device
[ 2.570694] usb 1-3.3: new low-speed USB device number 4 using xhci_hcd
[ 2.653228] usb 1-3.3: New USB device found, idVendor=04d9, idProduct=1836, bcdDevice= 0.01
[ 2.653230] usb 1-3.3: New USB device strings: Mfr=1, Product=2, SerialNumber=...
[ 2.653232] usb 1-3.3: Product: Mechanical Keyboard
[ 2.653233] usb 1-3.3: Manufacturer: LogoTech
[ 2.662473] sdb: sdb1 sdb2 sdb3 sdb4
[ 2.662558] sd 2:0:0:0: [sdb] Attached SCSI disk
[ 2.722693] usb 1-3.4: new low-speed USB device number 5 using xhci_hcd
[ 2.794227] Console: switching to colour frame buffer device 240x67
[ 2.799937] nouveau 0000:01:00.0: [drm] fb0: nouveaudrmfb frame buffer device
[ 2.801891] usb 1-3.4: New USB device found, idVendor=275d, idProduct=0ba6, bcdDevice= 1.00
[ 2.801894] usb 1-3.4: New USB device strings: Mfr=0, Product=1, SerialNumber=...
[ 2.801895] nouveau 0000:01:00.0: DRM: Disabling PCI power management to avoid bug
[ 2.801895] usb 1-3.4: Product: USB OPTICAL MOUSE
[ 3.357431] EXT4-fs (sda4): re-mounted HASH_E4F-6AD3-806C-EACF-ACD7F81D3F34. Quota mode: none.
[ 3.743603] zram0: detected capacity change from 0 to 8069120
[ 3.826890] Adding 4034556k swap on /dev/zram0. Priority:100 extents:1 across:4034556k SSDscFS
[ 3.981472] Adding 1023996k swap on /dev/sda3. Priority:-2 extents:1 across:1023996k SSDscFS
[ 4.084523] parport_pc 00:01: reported by Plug and Play ACPI
[ 4.084663] parport0: PC-style at 0x378 (0x778), irq 5, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA] EDAC MC: Ver: 3.0.0
[ 4.179915] EDAC ie31200: No ECC support
[ 4.179983] EDAC ie31200: No ECC support
[ 4.224372] hid: raw HID events driver (C) Jiri Kosina
[ 4.281719] snd_hda_intel 0000:01:00.1: Disabling MSI
[ 4.281728] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
[ 4.297101] usbcore: registered new interface driver usbhid
[ 4.297104] usbhid: USB HID core driver
[ 4.325182] snd_hda_intel 0000:01:00.1: bound 0000:01:00.0 (ops nv50_audio_component_bind_ops [nouveau])
[ 4.330821] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input3
[ 4.330849] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input4
[ 4.330873] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input5
[ 4.330896] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input6
[ 4.331391] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
[ 4.331513] pci 0000:00:1f.1: [8086:a120] type 00 class 0x058000
[ 4.331618] pci 0000:00:1f.1: reg 0x10: [mem 0xfd000000-0xfdffffff 64bit] e1000e: Intel(R) PRO/1000 Network Driver
[ 4.349446] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 4.350684] e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 4.359374] i2c i2c-17: 1/4 memory slots populated (from DMI)
[ 4.360065] i2c i2c-17: Successfully instantiated SPD at 0x51
[ 4.363930] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC892: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[ 4.363933] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 4.363935] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 4.363937] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 4.363938] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 4.363944] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
[ 4.363947] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
[ 4.363953] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
[ 4.395667] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input7
[ 4.395765] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input8
[ 4.395819] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1f.3/sound/card0/input9
[ 4.395896] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1f.3/sound/card0/input10
[ 4.395979] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1f.3/sound/card0/input11
[ 4.396053] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1f.3/sound/card0/input12
[ 4.396135] input: HDA Intel PCH Line Out Side as /devices/pci0000:00/0000:00:1f.3/sound/card0/input13
[ 4.398909] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input14
[ 4.459688] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 655360 ms ovfl timer
[ 4.459692] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[ 4.459693] RAPL PMU: hw unit of domain package 2^-14 Joules
[ 4.459693] RAPL PMU: hw unit of domain dram 2^-14 Joules
[ 4.777516] e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock
[ 4.810716] input: 2.4G Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3.1/1-3.1:1.0/0003:1EA7:0064.0001/input/input15
[ 4.810744] ppdev: user-space parallel port driver
[ 4.820097] input: 2.4G Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3.1/1-3.1:1.0/0003:1EA7:0064.0001/input/input16
[ 4.823698] hid-generic 0003:1EA7:0064.0001: input,hiddev0,hidraw0: USB HID v1.10 Mouse [2.4G Mouse] on usb-0000:00:14.0-3.1/input0
[ 4.824039] input: LogoTech Mechanical Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3.3/1-3.3:1.0/0003:04D9:1836.0002/input/input17
[ 4.879777] hid-generic 0003:04D9:1836.0002: input,hidraw1: USB HID v1.11 Keyboard [LogoTech Mechanical Keyboard] on usb-0000:00:14.0-3.3/input0
[ 4.879941] input: LogoTech Mechanical Keyboard Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3.3/1-3.3:1.1/0003:04D9:1836.0003/input/input18
[ 4.932906] input: LogoTech Mechanical Keyboard System Control as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3.3/1-3.3:1.1/0003:04D9:1836.0003/input/input19
[ 4.932943] input: LogoTech Mechanical Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3.3/1-3.3:1.1/0003:04D9:1836.0003/input/input20
[ 4.934157] hid-generic 0003:04D9:1836.0003: input,hidraw2: USB HID v1.11 Keyboard [LogoTech Mechanical Keyboard] on usb-0000:00:14.0-3.3/input1
[ 4.934337] input: USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3.4/1-3.4:1.0/0003:275D:0BA6.0004/input/input21
[ 4.934401] hid-generic 0003:275D:0BA6.0004: input,hidraw3: USB HID v1.11 Mouse [USB OPTICAL MOUSE ] on usb-0000:00:14.0-3.4/input0
[ 5.029581] ee1004 17-0051: 512 byte EE1004-compliant SPD EEPROM, read-only
[ 5.047798] iTCO_vendor_support: vendor-support=0
[ 5.069855] e1000e 0000:00:1f.6 eth0: (PCI Express:2.5GT/s:Width x1) AACDE88E67412D022D4001322C9D0E66
[ 5.069861] e1000e 0000:00:1f.6 eth0: Intel(R) PRO/1000 Network Connection
[ 5.069938] e1000e 0000:00:1f.6 eth0: MAC: 12, PHY: 12, PBA No: FFFFFF-0FF
[ 5.124832] intel_tcc_cooling: Programmable TCC Offset detected
[ 5.131311] iTCO_wdt iTCO_wdt: Found a Intel PCH TCO device (Version=4, TCOBASE=0x0400)
[ 5.155230] iTCO_wdt iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 5.379769] e1000e 0000:00:1f.6 enp0s31f6: renamed from eth0
[ 5.495426] intel_rapl_common: Found RAPL domain package
[ 5.495428] intel_rapl_common: Found RAPL domain core
[ 5.495430] intel_rapl_common: Found RAPL domain dram
[ 21.349560] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 100 Mbps Half Duplex, Flow Control: Rx
[ 21.349564] e1000e 0000:00:1f.6 enp0s31f6: 10/100 speed: disabling TSO
[ 21.351478] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Down
[ 23.036966] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 100 Mbps Full Duplex, Flow Control: None
[ 23.036980] e1000e 0000:00:1f.6 enp0s31f6: 10/100 speed: disabling TSO
[ 23.037071] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s31f6: link becomes ready
[ 23.056656] NET: Registered PF_PACKET protocol family
[ 458.990660] Non-volatile memory driver v1.3
[ 459.057549] st: Version 20160209, fixed bufsize 32768, s/g segs 256
[ 459.070703] sd 1:0:0:0: Attached scsi generic sg0 type 0
[ 459.070726] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 459.071403] sd 3:0:0:0: Attached scsi generic sg2 type 0
[ 459.090800] BIOS EDD facility v0.16 2004-Jun-25, 3 devices found
[ 462.633303] Bluetooth: Core ver 2.22
[ 462.633320] NET: Registered PF_BLUETOOTH protocol family
[ 462.633321] Bluetooth: HCI device and connection manager initialized
[ 462.633324] Bluetooth: HCI socket layer initialized
[ 462.633326] Bluetooth: L2CAP socket layer initialized
[ 462.633327] Bluetooth: SCO socket layer initialized
[ 463.316113] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 463.318579] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 2255.153074] zram0: detected capacity change from 8069120 to 0
[ 2255.278183] watchdog: watchdog0: watchdog did not stop!