Probe #d62c66d9bd of Gigabyte 970A-D3 Desktop Computer
Log: dmesg
[ 0.000000] Linux version 4.18.0-305.12.1.el8_4.x86_64 (XXX@XXX) (gcc version 8.4.1 20200928 (Red Hat 8.4.1-1) (GCC)) #1 SMP Mon Jul 26 08:06:24 EDT 2021
[ 0.000000] Command line: BOOT_IMAGE=(hd0,gpt2)/vmlinuz-4.18.0-305.12.1.el8_4.x86_64 root=/dev/mapper/XXXXXXXXX ro crashkernel=auto resume=/dev/mapper/XXXXXXXXX rd.lvm.lv=... rd.lvm.lv=... rhgb quiet
[ 0.000000] random: get_random_u32 called from bsp_init_amd+0x26a/0x2a0 with crng_init=0
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bee46fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bee47000-0x00000000bf13afff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bf13b000-0x00000000bf536fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bf537000-0x00000000bf854fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bf855000-0x00000000bf855fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bf856000-0x00000000bfa5bfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bfa5c000-0x00000000bfefffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec20000-0x00000000fec20fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed61000-0x00000000fed70fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fef00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100001000-0x000000043effffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] e820: update [mem 0x83c76018-0x83c92c57] usable ==> usable
[ 0.000000] e820: update [mem 0x83c76018-0x83c92c57] usable ==> usable
[ 0.000000] e820: update [mem 0x83c65018-0x83c75057] usable ==> usable
[ 0.000000] e820: update [mem 0x83c65018-0x83c75057] usable ==> usable
[ 0.000000] extended physical RAM map:
[ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x000000000009ffff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x0000000083c65017] usable
[ 0.000000] reserve setup_data: [mem 0x0000000083c65018-0x0000000083c75057] usable
[ 0.000000] reserve setup_data: [mem 0x0000000083c75058-0x0000000083c76017] usable
[ 0.000000] reserve setup_data: [mem 0x0000000083c76018-0x0000000083c92c57] usable
[ 0.000000] reserve setup_data: [mem 0x0000000083c92c58-0x00000000bee46fff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000bee47000-0x00000000bf13afff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000bf13b000-0x00000000bf536fff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x00000000bf537000-0x00000000bf854fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000bf855000-0x00000000bf855fff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000bf856000-0x00000000bfa5bfff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x00000000bfa5c000-0x00000000bfefffff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fec20000-0x00000000fec20fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fed61000-0x00000000fed70fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fef00000-0x00000000ffffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000100001000-0x000000043effffff] usable
[ 0.000000] efi: EFI v2.31 by American Megatrends
[ 0.000000] efi: ACPI=0xbf51a000 ACPI 2.0=0xbf51a000 SMBIOS=0xf04c0 MPS=0xfd4c0 MOKvar=0xbf5c5000
[ 0.000000] secureboot: Secure boot disabled
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: Gigabyte Technology Co., Ltd. To be filled by O.E.M./970A-D3, BIOS FB 10/18/2012
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 4018.493 MHz processor
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] last_pfn = 0x43f000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF write-through
[ 0.000000] C0000-CEFFF write-protect
[ 0.000000] CF000-DFFFF uncachable
[ 0.000000] E0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
[ 0.000000] 2 base 0000BFF00000 mask FFFFFFF00000 uncachable
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 000000043f000000 aka 17392M
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.000000] total RAM covered: 3071M
[ 0.000000] Found optimal setting for mtrr clean up
[ 0.000000] gran_size: 64K chunk_size: 2M num_reg: 3 lose cover RAM: 0G
[ 0.000000] e820: update [mem 0xbff00000-0xffffffff] usable ==> reserved
[ 0.000000] last_pfn = 0xbff00 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fd840-0x000fd84f]
[ 0.000000] kexec: Reserving the low 1M of memory for crashkernel
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] BRK [0x2f6001000, 0x2f6001fff] PGTABLE
[ 0.000000] BRK [0x2f6002000, 0x2f6002fff] PGTABLE
[ 0.000000] BRK [0x2f6003000, 0x2f6003fff] PGTABLE
[ 0.000000] BRK [0x2f6004000, 0x2f6004fff] PGTABLE
[ 0.000000] BRK [0x2f6005000, 0x2f6005fff] PGTABLE
[ 0.000000] BRK [0x2f6006000, 0x2f6006fff] PGTABLE
[ 0.000000] BRK [0x2f6007000, 0x2f6007fff] PGTABLE
[ 0.000000] BRK [0x2f6008000, 0x2f6008fff] PGTABLE
[ 0.000000] BRK [0x2f6009000, 0x2f6009fff] PGTABLE
[ 0.000000] BRK [0x2f600a000, 0x2f600afff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x38c02000-0x3c87afff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000BF51A000 000024 (v02 ALASKA)
[ 0.000000] ACPI: XSDT 0x00000000BF51A078 000074 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 0x00000000BF520718 0000F4 (v04 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20200925/tbfadt-624)
[ 0.000000] ACPI: DSDT 0x00000000BF51A188 00658A (v02 ALASKA A M I 00000000 INTL 20051117)
[ 0.000000] ACPI: FACS 0x00000000BF531F80 000040
[ 0.000000] ACPI: APIC 0x00000000BF520810 00009E (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 0x00000000BF5208B0 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: MCFG 0x00000000BF5208F8 00003C (v01 ALASKA A M I 01072009 MSFT 00010013)
[ 0.000000] ACPI: HPET 0x00000000BF520938 000038 (v01 ALASKA A M I 01072009 AMI 00000005)
[ 0.000000] ACPI: IFEU 0x00000000BF520970 000042 (v01 ALASKA A M I 01072009 00000000)
[ 0.000000] ACPI: BGRT 0x00000000BF5209B8 000038 (v00 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: SSDT 0x00000000BF5209F0 000D3C (v01 AMD POWERNOW 00000001 AMD 00000001)
[ 0.000000] ACPI: MATS 0x00000000BF521730 000034 (v02 ALASKA A M I 00000002 w?x2 00000000)
[ 0.000000] ACPI: IVRS 0x00000000BF521768 0000C8 (v01 AMD RD890S 00202031 AMD 00000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000043effffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x43efd4000-0x43effdfff]
[ 0.000000] Using crashkernel=auto, the size chosen is a best effort estimation.
[ 0.000000] Reserving 192MB of memory at 2624MB for crashkernel (System RAM: 16354MB)
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000043effffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009ffff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x00000000bee46fff]
[ 0.000000] node 0: [mem 0x00000000bf855000-0x00000000bf855fff]
[ 0.000000] node 0: [mem 0x00000000bfa5c000-0x00000000bfefffff]
[ 0.000000] node 0: [mem 0x0000000100001000-0x000000043effffff]
[ 0.000000] Zeroed struct page in unavailable ranges: 7542 pages
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000043effffff]
[ 0.000000] On node 0 totalpages: 4186762
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 159 pages reserved
[ 0.000000] DMA zone: 3999 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 12172 pages used for memmap
[ 0.000000] DMA32 zone: 778988 pages, LIFO batch:63
[ 0.000000] Normal zone: 53184 pages used for memmap
[ 0.000000] Normal zone: 3403775 pages, LIFO batch:63
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 9, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] IOAPIC[1]: apic_id 10, version 33, address 0xfec20000, GSI 24-55
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x43538210 base: 0xfed00000
[ 0.000000] e820: update [mem 0xb3db4000-0xb3f13fff] usable ==> reserved
[ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x83c65000-0x83c65fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x83c75000-0x83c75fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x83c76000-0x83c76fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x83c92000-0x83c92fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xb3db4000-0xb3f13fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbee47000-0xbf13afff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf13b000-0xbf536fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf537000-0xbf854fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf856000-0xbfa5bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbff00000-0xf7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfec0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec11000-0xfec1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec20000-0xfec20fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec21000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfed60fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed61000-0xfed70fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed71000-0xfed7ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed90000-0xfeefffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfef00000-0xffffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x100000000-0x100000fff]
[ 0.000000] [mem 0xbff00000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] percpu: Embedded 54 pages/cpu s184320 r8192 d28672 u262144
[ 0.000000] pcpu-alloc: s184320 r8192 d28672 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 4121183
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=(hd0,gpt2)/vmlinuz-4.18.0-305.12.1.el8_4.x86_64 root=/dev/mapper/XXXXXXXXX ro crashkernel=auto resume=/dev/mapper/XXXXXXXXX rd.lvm.lv=... rd.lvm.lv=... rhgb quiet
[ 0.000000] Specific versions of hardware are certified with Red Hat Enterprise Linux 8. Please see the list of hardware certified with Red Hat Enterprise Linux 8 at https://catalog.redhat.com.
[ 0.000000] Memory: 2887876K/16747048K available (12293K kernel code, 2225K rwdata, 7712K rodata, 2476K init, 14048K bss, 815836K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] ftrace: allocating 38583 entries in 151 pages
[ 0.000000] ftrace: allocated 151 pages with 5 groups
[ 0.001000] rcu: Hierarchical RCU implementation.
[ 0.001000] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8.
[ 0.001000] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
[ 0.001000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[ 0.001000] NR_IRQS: 524544, nr_irqs: 1032, preallocated irqs: 16
[ 0.001000] Console: colour dummy device 80x25
[ 0.001000] printk: console [tty0] enabled
[ 0.001000] ACPI: Core revision 20200925
[ 0.001000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
[ 0.001000] hpet clockevent registered
[ 0.001000] APIC: Switch to symmetric I/O mode setup
[ 0.001457] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.006002] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x39ec9a0411d, max_idle_ns: 440795249150 ns
[ 0.006003] Calibrating delay loop (skipped), value calculated using timer frequency.. 8036.98 BogoMIPS (lpj=4018493)
[ 0.006005] pid_max: default: 32768 minimum: 301
[ 0.013533] Security Framework initialized
[ 0.013534] Yama: becoming mindful.
[ 0.013537] SELinux: Initializing.
[ 0.016785] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.018422] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.018487] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.018540] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.018793] LVT offset 1 assigned for vector 0xf9
[ 0.018797] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
[ 0.018798] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0
[ 0.018798] FEATURE SPEC_CTRL Not Present
[ 0.018799] FEATURE IBPB_SUPPORT Present
[ 0.018800] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.018801] Spectre V2 : Mitigation: Full AMD retpoline
[ 0.018802] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.018804] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[ 0.018805] Spectre V2 : User space: Vulnerable
[ 0.018806] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[ 0.019062] Freeing SMP alternatives memory: 32K
[ 0.022000] smpboot: CPU0: AMD FX(tm)-8350 Eight-Core Processor (family: 0x15, model: 0x2, stepping: 0x0)
[ 0.022000] Performance Events: Fam15h core perfctr, AMD PMU driver.
[ 0.022000] ... version: 0
[ 0.022000] ... bit width: 48
[ 0.022000] ... generic registers: 6
[ 0.022000] ... value mask: 0000ffffffffffff
[ 0.022000] ... max period: 00007fffffffffff
[ 0.022000] ... fixed-purpose events: 0
[ 0.022000] ... event mask: 000000000000003f
[ 0.022000] rcu: Hierarchical SRCU implementation.
[ 0.022000] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.022000] smp: Bringing up secondary CPUs ...
[ 0.022000] x86: Booting SMP configuration:
[ 0.022000] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
[ 0.050028] smp: Brought up 1 node, 8 CPUs
[ 0.050028] smpboot: Max logical packages: 1
[ 0.050028] smpboot: Total of 8 processors activated (64295.88 BogoMIPS)
[ 0.078230] node 0 deferred pages initialised in 27ms
[ 0.079104] devtmpfs: initialized
[ 0.079104] x86/mm: Memory block size: 128MB
[ 0.080549] PM: Registering ACPI NVS region [mem 0xbf13b000-0xbf536fff] (4177920 bytes)
[ 0.080549] PM: Registering ACPI NVS region [mem 0xbf856000-0xbfa5bfff] (2121728 bytes)
[ 0.080549] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[ 0.080549] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 0.080549] pinctrl core: initialized pinctrl subsystem
[ 0.081025] NET: Registered protocol family 16
[ 0.081123] DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations
[ 0.081132] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.081140] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.081157] cpuidle: using governor menu
[ 0.081157] ACPI: bus type PCI registered
[ 0.081157] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.081179] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.081181] PCI: not using MMCONFIG
[ 0.081182] PCI: Using configuration type 1 for base access
[ 0.081182] PCI: Using configuration type 1 for extended access
[ 0.083037] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.083037] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.083045] cryptd: max_cpu_qlen set to 1000
[ 0.083069] ACPI: Added _OSI(Module Device)
[ 0.083069] ACPI: Added _OSI(Processor Device)
[ 0.083070] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.083071] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.083071] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.083072] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.083073] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[ 0.086575] ACPI: 2 ACPI AML tables successfully acquired and loaded
[ 0.087533] ACPI: Interpreter enabled
[ 0.087548] ACPI: (supports S0 S3 S4 S5)
[ 0.087549] ACPI: Using IOAPIC for interrupt routing
[ 0.087666] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.087698] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.087708] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.087904] ACPI: Enabled 10 GPEs in block 00 to 1F
[ 0.092157] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.092161] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
[ 0.092164] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.092428] PCI host bridge to bus 0000:00
[ 0.092430] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window]
[ 0.092431] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window]
[ 0.092432] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window]
[ 0.092433] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.092434] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.092435] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[ 0.092436] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff window]
[ 0.092437] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.092446] pci 0000:00:00.0: [1002:5a14] type 00 class 0x060000
[ 0.092560] pci 0000:00:00.2: [1002:5a23] type 00 class 0x080600
[ 0.092662] pci 0000:00:02.0: [1002:5a16] type 01 class 0x060400
[ 0.092680] pci 0000:00:02.0: enabling Extended Tags
[ 0.092701] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 0.092792] pci 0000:00:04.0: [1002:5a18] type 01 class 0x060400
[ 0.092809] pci 0000:00:04.0: enabling Extended Tags
[ 0.092829] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
[ 0.092920] pci 0000:00:09.0: [1002:5a1c] type 01 class 0x060400
[ 0.092936] pci 0000:00:09.0: enabling Extended Tags
[ 0.092956] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
[ 0.093050] pci 0000:00:11.0: [1002:4390] type 00 class 0x01018f
[ 0.093066] pci 0000:00:11.0: reg 0x10: [io 0xf090-0xf097]
[ 0.093073] pci 0000:00:11.0: reg 0x14: [io 0xf080-0xf083]
[ 0.093079] pci 0000:00:11.0: reg 0x18: [io 0xf070-0xf077]
[ 0.093086] pci 0000:00:11.0: reg 0x1c: [io 0xf060-0xf063]
[ 0.093092] pci 0000:00:11.0: reg 0x20: [io 0xf050-0xf05f]
[ 0.093099] pci 0000:00:11.0: reg 0x24: [mem 0xfeb0b000-0xfeb0b3ff]
[ 0.093115] pci 0000:00:11.0: set SATA to AHCI mode
[ 0.093208] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
[ 0.093220] pci 0000:00:12.0: reg 0x10: [mem 0xfeb0a000-0xfeb0afff]
[ 0.093338] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
[ 0.093354] pci 0000:00:12.2: reg 0x10: [mem 0xfeb09000-0xfeb090ff]
[ 0.093413] pci 0000:00:12.2: supports D1 D2
[ 0.093414] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.093499] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
[ 0.093513] pci 0000:00:13.0: reg 0x10: [mem 0xfeb08000-0xfeb08fff]
[ 0.093630] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
[ 0.093646] pci 0000:00:13.2: reg 0x10: [mem 0xfeb07000-0xfeb070ff]
[ 0.093703] pci 0000:00:13.2: supports D1 D2
[ 0.093704] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.093792] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
[ 0.093914] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a
[ 0.093927] pci 0000:00:14.1: reg 0x10: [io 0xf040-0xf047]
[ 0.093933] pci 0000:00:14.1: reg 0x14: [io 0xf030-0xf033]
[ 0.093939] pci 0000:00:14.1: reg 0x18: [io 0xf020-0xf027]
[ 0.093946] pci 0000:00:14.1: reg 0x1c: [io 0xf010-0xf013]
[ 0.093952] pci 0000:00:14.1: reg 0x20: [io 0xf000-0xf00f]
[ 0.093967] pci 0000:00:14.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ 0.093968] pci 0000:00:14.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 0.093968] pci 0000:00:14.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ 0.093969] pci 0000:00:14.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 0.094048] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
[ 0.094066] pci 0000:00:14.2: reg 0x10: [mem 0xfeb00000-0xfeb03fff 64bit]
[ 0.094115] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.094193] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
[ 0.094314] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
[ 0.094420] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
[ 0.094433] pci 0000:00:14.5: reg 0x10: [mem 0xfeb06000-0xfeb06fff]
[ 0.094549] pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310
[ 0.094562] pci 0000:00:16.0: reg 0x10: [mem 0xfeb05000-0xfeb05fff]
[ 0.094678] pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320
[ 0.094693] pci 0000:00:16.2: reg 0x10: [mem 0xfeb04000-0xfeb040ff]
[ 0.094751] pci 0000:00:16.2: supports D1 D2
[ 0.094751] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
[ 0.094834] pci 0000:00:18.0: [1022:1600] type 00 class 0x060000
[ 0.094899] pci 0000:00:18.1: [1022:1601] type 00 class 0x060000
[ 0.094962] pci 0000:00:18.2: [1022:1602] type 00 class 0x060000
[ 0.095031] pci 0000:00:18.3: [1022:1603] type 00 class 0x060000
[ 0.095097] pci 0000:00:18.4: [1022:1604] type 00 class 0x060000
[ 0.095158] pci 0000:00:18.5: [1022:1605] type 00 class 0x060000
[ 0.095257] pci 0000:01:00.0: [1002:699f] type 00 class 0x030000
[ 0.095282] pci 0000:01:00.0: reg 0x10: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.095292] pci 0000:01:00.0: reg 0x18: [mem 0xd0000000-0xd01fffff 64bit pref]
[ 0.095298] pci 0000:01:00.0: reg 0x20: [io 0xe000-0xe0ff]
[ 0.095304] pci 0000:01:00.0: reg 0x24: [mem 0xfea00000-0xfea3ffff]
[ 0.095311] pci 0000:01:00.0: reg 0x30: [mem 0xfea40000-0xfea5ffff pref]
[ 0.095317] pci 0000:01:00.0: enabling Extended Tags
[ 0.095326] pci 0000:01:00.0: BAR 0: assigned to efifb
[ 0.095380] pci 0000:01:00.0: supports D1 D2
[ 0.095381] pci 0000:01:00.0: PME# supported from D1 D2 D3hot D3cold
[ 0.095438] pci 0000:01:00.0: 32.000 Gb/s available PCIe bandwidth, limited by 5.0 GT/s PCIe x8 link at 0000:00:02.0 (capable of 63.008 Gb/s with 8.0 GT/s PCIe x8 link)
[ 0.095485] pci 0000:01:00.1: [1002:aae0] type 00 class 0x040300
[ 0.095503] pci 0000:01:00.1: reg 0x10: [mem 0xfea60000-0xfea63fff 64bit]
[ 0.095528] pci 0000:01:00.1: enabling Extended Tags
[ 0.095572] pci 0000:01:00.1: supports D1 D2
[ 0.095656] pci 0000:00:02.0: PCI bridge to [bus 01]
[ 0.095658] pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
[ 0.095660] pci 0000:00:02.0: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.095662] pci 0000:00:02.0: bridge window [mem 0xc0000000-0xd01fffff 64bit pref]
[ 0.095693] pci 0000:02:00.0: [1b6f:7023] type 00 class 0x0c0330
[ 0.095713] pci 0000:02:00.0: reg 0x10: [mem 0xfe900000-0xfe907fff 64bit]
[ 0.095748] pci 0000:02:00.0: enabling Extended Tags
[ 0.095788] pci 0000:02:00.0: supports D1 D2
[ 0.095789] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.099023] pci 0000:00:04.0: PCI bridge to [bus 02]
[ 0.099027] pci 0000:00:04.0: bridge window [mem 0xfe900000-0xfe9fffff]
[ 0.099085] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
[ 0.099104] pci 0000:03:00.0: reg 0x10: [io 0xd000-0xd0ff]
[ 0.099122] pci 0000:03:00.0: reg 0x18: [mem 0xd0304000-0xd0304fff 64bit pref]
[ 0.099134] pci 0000:03:00.0: reg 0x20: [mem 0xd0300000-0xd0303fff 64bit pref]
[ 0.099201] pci 0000:03:00.0: supports D1 D2
[ 0.099202] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.102017] pci 0000:00:09.0: PCI bridge to [bus 03]
[ 0.102020] pci 0000:00:09.0: bridge window [io 0xd000-0xdfff]
[ 0.102023] pci 0000:00:09.0: bridge window [mem 0xd0300000-0xd03fffff 64bit pref]
[ 0.102032] pci_bus 0000:04: extended config space not accessible
[ 0.102082] pci 0000:00:14.4: PCI bridge to [bus 04] (subtractive decode)
[ 0.102088] pci 0000:00:14.4: bridge window [io 0x0000-0x03af window] (subtractive decode)
[ 0.102089] pci 0000:00:14.4: bridge window [io 0x03e0-0x0cf7 window] (subtractive decode)
[ 0.102090] pci 0000:00:14.4: bridge window [io 0x03b0-0x03df window] (subtractive decode)
[ 0.102091] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ 0.102092] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[ 0.102093] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode)
[ 0.102094] pci 0000:00:14.4: bridge window [mem 0xc0000000-0xffffffff window] (subtractive decode)
[ 0.102466] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 10 11 14 15) *0
[ 0.102520] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 11 14 15) *0
[ 0.102574] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 10 11 14 15) *0
[ 0.102626] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 10 11 14 15) *0
[ 0.102670] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 14 15) *0
[ 0.102703] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 14 15) *0
[ 0.102737] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 10 11 14 15) *0
[ 0.102774] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 14 15) *0
[ 0.103017] iommu: Default domain type: Passthrough
[ 0.103019] pci 0000:01:00.0: vgaarb: setting as boot VGA device
[ 0.103019] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.103019] pci 0000:01:00.0: vgaarb: bridge control possible
[ 0.103019] vgaarb: loaded
[ 0.103094] SCSI subsystem initialized
[ 0.103113] ACPI: bus type USB registered
[ 0.103125] usbcore: registered new interface driver usbfs
[ 0.103132] usbcore: registered new interface driver hub
[ 0.103153] usbcore: registered new device driver usb
[ 0.103176] pps_core: LinuxPPS API ver. 1 registered
[ 0.103176] pps_core: Software ver. 5.3.6 - Copyright 0FB6-08D5 Rodolfo Giometti <XXX@XXX>
[ 0.103178] PTP clock support registered
[ 0.103201] EDAC MC: Ver: 3.0.0
[ 0.103201] Registered efivars operations
[ 0.109059] PCI: Using ACPI for IRQ routing
[ 0.115087] PCI: pci_cache_line_size set to 64 bytes
[ 0.115132] e820: reserve RAM buffer [mem 0x83c65018-0x83ffffff]
[ 0.115133] e820: reserve RAM buffer [mem 0x83c76018-0x83ffffff]
[ 0.115134] e820: reserve RAM buffer [mem 0xb3db4000-0xb3ffffff]
[ 0.115134] e820: reserve RAM buffer [mem 0xbee47000-0xbfffffff]
[ 0.115135] e820: reserve RAM buffer [mem 0xbf856000-0xbfffffff]
[ 0.115136] e820: reserve RAM buffer [mem 0xbff00000-0xbfffffff]
[ 0.115136] e820: reserve RAM buffer [mem 0x43f000000-0x43fffffff]
[ 0.115229] NetLabel: Initializing
[ 0.115230] NetLabel: domain hash size = 128
[ 0.115230] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.115241] NetLabel: unlabeled traffic allowed by default
[ 0.115245] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.115245] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 0.117047] clocksource: Switched to clocksource tsc-early
[ 0.131244] VFS: Disk quotas dquot_6.6.0
[ 0.131256] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.131305] pnp: PnP ACPI init
[ 0.131412] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.131417] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.131636] system 00:01: [io 0x040b] has been reserved
[ 0.131637] system 00:01: [io 0x04d6] has been reserved
[ 0.131639] system 00:01: [io 0x0c00-0x0c01] has been reserved
[ 0.131640] system 00:01: [io 0x0c14] has been reserved
[ 0.131642] system 00:01: [io 0x0c50-0x0c51] has been reserved
[ 0.131643] system 00:01: [io 0x0c52] has been reserved
[ 0.131644] system 00:01: [io 0x0c6c] has been reserved
[ 0.131645] system 00:01: [io 0x0c6f] has been reserved
[ 0.131646] system 00:01: [io 0x0cd0-0x0cd1] has been reserved
[ 0.131649] system 00:01: [io 0x0cd2-0x0cd3] has been reserved
[ 0.131650] system 00:01: [io 0x0cd4-0x0cd5] has been reserved
[ 0.131651] system 00:01: [io 0x0cd6-0x0cd7] has been reserved
[ 0.131652] system 00:01: [io 0x0cd8-0x0cdf] has been reserved
[ 0.131653] system 00:01: [io 0x0800-0x089f] has been reserved
[ 0.131654] system 00:01: [io 0x0b20-0x0b3f] has been reserved
[ 0.131655] system 00:01: [io 0x0900-0x090f] has been reserved
[ 0.131656] system 00:01: [io 0x0910-0x091f] has been reserved
[ 0.131657] system 00:01: [io 0xfe00-0xfefe] has been reserved
[ 0.131659] system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.131660] system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.131662] system 00:01: [mem 0xfed80000-0xfed8ffff] has been reserved
[ 0.131663] system 00:01: [mem 0xfed61000-0xfed70fff] has been reserved
[ 0.131665] system 00:01: [mem 0xfec10000-0xfec10fff] has been reserved
[ 0.131666] system 00:01: [mem 0xfed00000-0xfed00fff] could not be reserved
[ 0.131668] system 00:01: [mem 0xffc00000-0xffffffff] has been reserved
[ 0.131671] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.131797] system 00:02: [io 0x0220-0x0227] has been reserved
[ 0.131798] system 00:02: [io 0x0228-0x0237] has been reserved
[ 0.131800] system 00:02: [io 0x0a20-0x0a2f] has been reserved
[ 0.131803] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.132016] pnp 00:03: [dma 0 disabled]
[ 0.132052] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.132071] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.132120] system 00:05: [io 0x04d0-0x04d1] has been reserved
[ 0.132123] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.132157] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.132264] system 00:07: [mem 0xfeb20000-0xfeb23fff] could not be reserved
[ 0.132267] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.132349] system 00:08: [mem 0xfec20000-0xfec200ff] could not be reserved
[ 0.132352] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.132444] pnp: PnP ACPI: found 9 devices
[ 0.138384] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.138422] pci 0000:00:02.0: PCI bridge to [bus 01]
[ 0.138424] pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
[ 0.138426] pci 0000:00:02.0: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.138428] pci 0000:00:02.0: bridge window [mem 0xc0000000-0xd01fffff 64bit pref]
[ 0.138430] pci 0000:00:04.0: PCI bridge to [bus 02]
[ 0.138432] pci 0000:00:04.0: bridge window [mem 0xfe900000-0xfe9fffff]
[ 0.138435] pci 0000:00:09.0: PCI bridge to [bus 03]
[ 0.138436] pci 0000:00:09.0: bridge window [io 0xd000-0xdfff]
[ 0.138439] pci 0000:00:09.0: bridge window [mem 0xd0300000-0xd03fffff 64bit pref]
[ 0.138442] pci 0000:00:14.4: PCI bridge to [bus 04]
[ 0.138450] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window]
[ 0.138451] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window]
[ 0.138452] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window]
[ 0.138453] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window]
[ 0.138454] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
[ 0.138455] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
[ 0.138456] pci_bus 0000:00: resource 10 [mem 0xc0000000-0xffffffff window]
[ 0.138457] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.138458] pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfeafffff]
[ 0.138459] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd01fffff 64bit pref]
[ 0.138460] pci_bus 0000:02: resource 1 [mem 0xfe900000-0xfe9fffff]
[ 0.138461] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
[ 0.138462] pci_bus 0000:03: resource 2 [mem 0xd0300000-0xd03fffff 64bit pref]
[ 0.138463] pci_bus 0000:04: resource 4 [io 0x0000-0x03af window]
[ 0.138464] pci_bus 0000:04: resource 5 [io 0x03e0-0x0cf7 window]
[ 0.138465] pci_bus 0000:04: resource 6 [io 0x03b0-0x03df window]
[ 0.138466] pci_bus 0000:04: resource 7 [io 0x0d00-0xffff window]
[ 0.138467] pci_bus 0000:04: resource 8 [mem 0x000a0000-0x000bffff window]
[ 0.138468] pci_bus 0000:04: resource 9 [mem 0x000c0000-0x000dffff window]
[ 0.138469] pci_bus 0000:04: resource 10 [mem 0xc0000000-0xffffffff window]
[ 0.138518] NET: Registered protocol family 2
[ 0.138674] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes)
[ 0.138737] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.138985] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.139177] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.139305] MPTCP token hash table entries: 16384 (order: 6, 393216 bytes)
[ 0.139350] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.139416] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.139509] NET: Registered protocol family 1
[ 0.139512] NET: Registered protocol family 44
[ 0.163702] pci 0000:00:12.0: quirk_usb_early_handoff+0x0/0x6a0 took 23601 usecs
[ 0.187691] pci 0000:00:13.0: quirk_usb_early_handoff+0x0/0x6a0 took 23323 usecs
[ 0.211687] pci 0000:00:14.5: quirk_usb_early_handoff+0x0/0x6a0 took 23323 usecs
[ 0.235683] pci 0000:00:16.0: quirk_usb_early_handoff+0x0/0x6a0 took 23426 usecs
[ 0.235799] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.235821] pci 0000:01:00.1: D0 power state depends on 0000:01:00.0
[ 0.235969] PCI: CLS 64 bytes, default 64
[ 0.236005] Unpacking initramfs...
[ 0.929797] Freeing initrd memory: 61924K
[ 0.930105] pci 0000:00:00.0: Adding to iommu group 0
[ 0.930118] pci 0000:00:02.0: Adding to iommu group 1
[ 0.930129] pci 0000:00:04.0: Adding to iommu group 2
[ 0.930141] pci 0000:00:09.0: Adding to iommu group 3
[ 0.930151] pci 0000:00:11.0: Adding to iommu group 4
[ 0.930169] pci 0000:00:12.0: Adding to iommu group 5
[ 0.930179] pci 0000:00:12.2: Adding to iommu group 5
[ 0.930197] pci 0000:00:13.0: Adding to iommu group 6
[ 0.930206] pci 0000:00:13.2: Adding to iommu group 6
[ 0.930217] pci 0000:00:14.0: Adding to iommu group 7
[ 0.930227] pci 0000:00:14.1: Adding to iommu group 8
[ 0.930238] pci 0000:00:14.2: Adding to iommu group 9
[ 0.930249] pci 0000:00:14.3: Adding to iommu group 10
[ 0.930259] pci 0000:00:14.4: Adding to iommu group 11
[ 0.930274] pci 0000:00:14.5: Adding to iommu group 12
[ 0.930293] pci 0000:00:16.0: Adding to iommu group 13
[ 0.930304] pci 0000:00:16.2: Adding to iommu group 13
[ 0.930342] pci 0000:01:00.0: Adding to iommu group 14
[ 0.930363] pci 0000:01:00.1: Adding to iommu group 14
[ 0.930377] pci 0000:02:00.0: Adding to iommu group 15
[ 0.930391] pci 0000:03:00.0: Adding to iommu group 16
[ 0.971054] pci 0000:00:00.2: Found IOMMU cap 0x40
[ 0.971054] AMD-Vi: Interrupt remapping enabled
[ 0.971147] AMD-Vi: Lazy IO/TLB flushing enabled
[ 0.971148] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.971150] software IO TLB: mapped [mem 0xa0000000-0xa4000000] (64MB)
[ 0.971229] amd_uncore: 4 amd_nb counters detected
[ 0.971364] LVT offset 0 assigned for vector 0x400
[ 0.971424] perf: AMD IBS detected (0x000000ff)
[ 0.980324] Initialise system trusted keyrings
[ 0.980330] Key type blacklist registered
[ 0.980380] workingset: timestamp_bits=36 max_order=22 bucket_order=0
[ 0.982232] zbud: loaded
[ 0.982533] pstore: using deflate compression
[ 0.982766] Platform Keyring initialized
[ 1.076337] NET: Registered protocol family 38
[ 1.076340] Key type asymmetric registered
[ 1.076340] Asymmetric key parser 'x509' registered
[ 1.076351] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[ 1.076402] io scheduler mq-deadline registered
[ 1.076402] io scheduler kyber registered
[ 1.076436] io scheduler bfq registered
[ 1.076538] atomic64_test: passed for x86-64 platform with CX8 and with SSE
[ 1.076994] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 1.077036] efifb: probing for efifb
[ 1.077049] efifb: framebuffer at 0xc0000000, using 1952k, total 1950k
[ 1.077050] efifb: mode is 800x600x32, linelength=3328, pages=1
[ 1.077050] efifb: scrolling: redraw
[ 1.077051] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 1.077091] fbcon: Deferring console take-over
[ 1.077091] fb0: EFI VGA frame buffer device
[ 1.077175] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 1.077206] ACPI: Power Button [PWRB]
[ 1.077235] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 1.077255] ACPI: Power Button [PWRF]
[ 1.077283] ACPI: \_PR_.P001: Found 2 idle states
[ 1.077353] ACPI: \_PR_.P002: Found 2 idle states
[ 1.077406] ACPI: \_PR_.P003: Found 2 idle states
[ 1.077466] ACPI: \_PR_.P004: Found 2 idle states
[ 1.077564] ACPI: \_PR_.P005: Found 2 idle states
[ 1.077634] ACPI: \_PR_.P006: Found 2 idle states
[ 1.077725] ACPI: \_PR_.P007: Found 2 idle states
[ 1.077821] ACPI: \_PR_.P008: Found 2 idle states
[ 1.078027] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.098543] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 1.098940] Non-volatile memory driver v1.3
[ 1.099401] rdac: device handler registered
[ 1.099437] hp_sw: device handler registered
[ 1.099437] emc: device handler registered
[ 1.099474] alua: device handler registered
[ 1.099550] libphy: Fixed MDIO Bus: probed
[ 1.099593] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.099595] ehci-pci: EHCI PCI platform driver
[ 1.099665] QUIRK: Enable AMD PLL fix
[ 1.099678] ehci-pci 0000:00:12.2: EHCI Host Controller
[ 1.099707] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 1.099711] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.099718] ehci-pci 0000:00:12.2: debug port 1
[ 1.099756] ehci-pci 0000:00:12.2: irq 17, io mem 0xfeb09000
[ 1.106035] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 1.106091] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.18
[ 1.106092] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=...
[ 1.106093] usb usb1: Product: EHCI Host Controller
[ 1.106094] usb usb1: Manufacturer: Linux 4.18.0-305.12.1.el8_4.x86_64 ehci_hcd
[ 1.106095] usb usb1: SerialNumber: ...
[ 1.106188] hub 1-0:1.0: USB hub found
[ 1.106193] hub 1-0:1.0: 5 ports detected
[ 1.106378] ehci-pci 0000:00:13.2: EHCI Host Controller
[ 1.106410] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 1.106412] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.106418] ehci-pci 0000:00:13.2: debug port 1
[ 1.106441] ehci-pci 0000:00:13.2: irq 17, io mem 0xfeb07000
[ 1.113105] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 1.113210] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.18
[ 1.113213] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=...
[ 1.113216] usb usb2: Product: EHCI Host Controller
[ 1.113219] usb usb2: Manufacturer: Linux 4.18.0-305.12.1.el8_4.x86_64 ehci_hcd
[ 1.113221] usb usb2: SerialNumber: ...
[ 1.113363] hub 2-0:1.0: USB hub found
[ 1.113368] hub 2-0:1.0: 5 ports detected
[ 1.113554] ehci-pci 0000:00:16.2: EHCI Host Controller
[ 1.113592] ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 3
[ 1.113595] ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.113602] ehci-pci 0000:00:16.2: debug port 1
[ 1.113624] ehci-pci 0000:00:16.2: irq 17, io mem 0xfeb04000
[ 1.120099] ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00
[ 1.120215] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.18
[ 1.120218] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=...
[ 1.120221] usb usb3: Product: EHCI Host Controller
[ 1.120223] usb usb3: Manufacturer: Linux 4.18.0-305.12.1.el8_4.x86_64 ehci_hcd
[ 1.120225] usb usb3: SerialNumber: ...
[ 1.120361] hub 3-0:1.0: USB hub found
[ 1.120366] hub 3-0:1.0: 4 ports detected
[ 1.120479] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.120484] ohci-pci: OHCI PCI platform driver
[ 1.120566] ohci-pci 0000:00:12.0: OHCI PCI host controller
[ 1.120597] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 4
[ 1.120624] ohci-pci 0000:00:12.0: irq 18, io mem 0xfeb0a000
[ 1.176151] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.18
[ 1.176153] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=...
[ 1.176154] usb usb4: Product: OHCI PCI host controller
[ 1.176155] usb usb4: Manufacturer: Linux 4.18.0-305.12.1.el8_4.x86_64 ohci_hcd
[ 1.176156] usb usb4: SerialNumber: ...
[ 1.176296] hub 4-0:1.0: USB hub found
[ 1.176303] hub 4-0:1.0: 5 ports detected
[ 1.176490] ohci-pci 0000:00:13.0: OHCI PCI host controller
[ 1.176524] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5
[ 1.176539] ohci-pci 0000:00:13.0: irq 18, io mem 0xfeb08000
[ 1.232154] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.18
[ 1.232156] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=...
[ 1.232157] usb usb5: Product: OHCI PCI host controller
[ 1.232158] usb usb5: Manufacturer: Linux 4.18.0-305.12.1.el8_4.x86_64 ohci_hcd
[ 1.232158] usb usb5: SerialNumber: ...
[ 1.232306] hub 5-0:1.0: USB hub found
[ 1.232313] hub 5-0:1.0: 5 ports detected
[ 1.232501] ohci-pci 0000:00:14.5: OHCI PCI host controller
[ 1.232535] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 6
[ 1.232549] ohci-pci 0000:00:14.5: irq 18, io mem 0xfeb06000
[ 1.288150] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.18
[ 1.288151] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=...
[ 1.288152] usb usb6: Product: OHCI PCI host controller
[ 1.288153] usb usb6: Manufacturer: Linux 4.18.0-305.12.1.el8_4.x86_64 ohci_hcd
[ 1.288154] usb usb6: SerialNumber: ...
[ 1.288297] hub 6-0:1.0: USB hub found
[ 1.288304] hub 6-0:1.0: 2 ports detected
[ 1.288475] ohci-pci 0000:00:16.0: OHCI PCI host controller
[ 1.288509] ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 7
[ 1.288527] ohci-pci 0000:00:16.0: irq 18, io mem 0xfeb05000
[ 1.344152] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.18
[ 1.344154] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=...
[ 1.344155] usb usb7: Product: OHCI PCI host controller
[ 1.344156] usb usb7: Manufacturer: Linux 4.18.0-305.12.1.el8_4.x86_64 ohci_hcd
[ 1.344157] usb usb7: SerialNumber: ...
[ 1.344300] hub 7-0:1.0: USB hub found
[ 1.344306] hub 7-0:1.0: 4 ports detected
[ 1.344426] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.344522] xhci_hcd 0000:02:00.0: xHCI Host Controller
[ 1.344553] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 8
[ 1.344605] xhci_hcd 0000:02:00.0: hcc params 0x040050af hci version 0x100 quirks 0x0000000000080490
[ 1.344731] usb usb8: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.18
[ 1.344732] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=...
[ 1.344733] usb usb8: Product: xHCI Host Controller
[ 1.344734] usb usb8: Manufacturer: Linux 4.18.0-305.12.1.el8_4.x86_64 xhci-hcd
[ 1.344735] usb usb8: SerialNumber: ...
[ 1.344806] hub 8-0:1.0: USB hub found
[ 1.344813] hub 8-0:1.0: 2 ports detected
[ 1.344900] xhci_hcd 0000:02:00.0: xHCI Host Controller
[ 1.344925] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 9
[ 1.344927] xhci_hcd 0000:02:00.0: Host supports USB 3.0 SuperSpeed
[ 1.344939] usb usb9: We don't know the algorithms for LPM for this host, disabling LPM.
[ 1.344957] usb usb9: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.18
[ 1.344958] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=...
[ 1.344959] usb usb9: Product: xHCI Host Controller
[ 1.344960] usb usb9: Manufacturer: Linux 4.18.0-305.12.1.el8_4.x86_64 xhci-hcd
[ 1.344961] usb usb9: SerialNumber: ...
[ 1.345030] hub 9-0:1.0: USB hub found
[ 1.345036] hub 9-0:1.0: 2 ports detected
[ 1.345137] usbcore: registered new interface driver usbserial_generic
[ 1.345140] usbserial: USB Serial support registered for generic
[ 1.345175] i8042: PNP: No PS/2 controller found.
[ 1.345209] mousedev: PS/2 mouse device common for all mice
[ 1.345295] rtc_cmos 00:04: RTC can wake from S4
[ 1.345418] rtc_cmos 00:04: registered as rtc0
[ 1.345429] rtc_cmos 00:04: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.345619] EFI Variables Facility v0.08 2004-May-17
[ 1.351577] hid: raw HID events driver (C) Jiri Kosina
[ 1.351611] usbcore: registered new interface driver usbhid
[ 1.351611] usbhid: USB HID core driver
[ 1.351679] drop_monitor: Initializing network drop monitor service
[ 1.351737] Initializing XFRM netlink socket
[ 1.351843] NET: Registered protocol family 10
[ 1.352087] Segment Routing with IPv6
[ 1.352100] NET: Registered protocol family 17
[ 1.352146] mpls_gso: MPLS GSO support
[ 1.352549] core: Using 7 MCE banks
[ 1.352555] microcode: microcode updated early to new patch_level=0x06000852
[ 1.352574] microcode: CPU0: patch_level=0x06000852
[ 1.352576] microcode: CPU1: patch_level=0x06000852
[ 1.352583] microcode: CPU2: patch_level=0x06000852
[ 1.352589] microcode: CPU3: patch_level=0x06000852
[ 1.352596] microcode: CPU4: patch_level=0x06000852
[ 1.352601] microcode: CPU5: patch_level=0x06000852
[ 1.352608] microcode: CPU6: patch_level=0x06000852
[ 1.352614] microcode: CPU7: patch_level=0x06000852
[ 1.352636] microcode: Microcode Update Driver: v2.2.
[ 1.352648] AVX version of gcm_enc/dec engaged.
[ 1.352649] AES CTR mode by8 optimization enabled
[ 1.388454] sched_clock: Marking stable (1388447943, 0)->(1745788637, -357340694)
[ 1.388559] registered taskstats version 1
[ 1.388569] Loading compiled-in X.509 certificates
[ 1.425068] usb 1-5: new high-speed USB device number 2 using ehci-pci
[ 1.427565] Loaded X.509 cert 'Red Hat Enterprise Linux kernel signing key: 69a8e9938123f1b6a76551b1f90d9ccaa787f945'
[ 1.427992] Loaded X.509 cert 'Red Hat Enterprise Linux Driver Update Program (key 3): bf57f3e87362bc7229d9f465321773dfd1f77a80'
[ 1.428434] Loaded X.509 cert 'Red Hat Enterprise Linux kpatch signing key: 4d38fd864ebe18c5f0b72e3852e2014c3a676fc8'
[ 1.428471] zswap: loaded using pool lzo/zbud
[ 1.428537] page_owner is disabled
[ 1.435794] Key type big_key registered
[ 1.439305] Key type encrypted registered
[ 1.439608] integrity: Loading X.509 certificate: UEFI:MokListRT (MOKvar table)
[ 1.439827] integrity: Loaded X.509 cert 'Red Hat Secure Boot CA 5: cc6fa5e72868ba494e939bbd680b9144769a9f8f'
[ 1.439829] ima: No TPM chip found, activating TPM-bypass!
[ 1.439832] ima: Allocated hash algorithm: sha256
[ 1.439839] ima: No architecture policies found
[ 1.439847] evm: Initialising EVM extended attributes:
[ 1.439848] evm: security.selinux
[ 1.439848] evm: security.ima
[ 1.439848] evm: security.capability
[ 1.439849] evm: HMAC attrs: 0x1
[ 1.440176] rtc_cmos 00:04: setting system clock to 2021-08-11 22:49:32 UTC (1628722172)
[ 1.441455] Freeing unused decrypted memory: 2036K
[ 1.441980] Freeing unused kernel memory: 2476K
[ 1.452118] Write protecting the kernel read-only data: 22528k
[ 1.452795] Freeing unused kernel memory: 2012K
[ 1.452937] Freeing unused kernel memory: 480K
[ 1.476062] systemd[1]: systemd 239 (239-45.el8_4.3) running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=legacy)
[ 1.488186] systemd[1]: Detected architecture x86-64.
[ 1.488193] systemd[1]: Running in initial RAM disk.
[ 1.498511] systemd[1]: Set hostname to ...
[ 1.548977] random: systemd: uninitialized urandom read (16 bytes read)
[ 1.549674] systemd[1]: Created slice system-systemd\x2dhibernate\x2dresume.slice.
[ 1.549705] random: systemd: uninitialized urandom read (16 bytes read)
[ 1.549783] systemd[1]: Listening on Journal Socket.
[ 1.549858] random: systemd: uninitialized urandom read (16 bytes read)
[ 1.550438] systemd[1]: Starting Load Kernel Modules...
[ 1.551056] systemd[1]: Starting Setup Virtual Console...
[ 1.551755] systemd[1]: Started Memstrack Anylazing Service.
[ 1.551864] systemd[1]: Reached target Swap.
[ 1.562965] usb 1-5: New USB device found, idVendor=0951, idProduct=1666, bcdDevice= 0.01
[ 1.562967] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=...
[ 1.562968] usb 1-5: Product: DataTraveler 3.0
[ 1.562969] usb 1-5: Manufacturer: Kingston
[ 1.562971] usb 1-5: SerialNumber: ...
[ 1.569341] fuse: init (API version 7.31)
[ 1.689071] usb 7-1: new low-speed USB device number 2 using ohci-pci
[ 1.744634] device-mapper: uevent: version 1.0.3
[ 1.744706] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: XXX@XXX
[ 1.803436] usb-storage 1-5:1.0: USB Mass Storage device detected
[ 1.803592] scsi host0: usb-storage 1-5:1.0
[ 1.803706] usbcore: registered new interface driver usb-storage
[ 1.806355] usbcore: registered new interface driver uas
[ 1.858119] usb 7-1: New USB device found, idVendor=c0f4, idProduct=01b0, bcdDevice= 1.10
[ 1.858121] usb 7-1: New USB device strings: Mfr=1, Product=2, SerialNumber=...
[ 1.858123] usb 7-1: Product: usb keyboard
[ 1.858124] usb 7-1: Manufacturer: USB
[ 1.865715] input: USB usb keyboard as /devices/pci0000:00/0000:00:16.0/usb7/7-1/7-1:1.0/0003:C0F4:01B0.0001/input/input2
[ 1.897748] libata version 3.00 loaded.
[ 1.901036] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 1.904523] libphy: r8169: probed
[ 1.904980] r8169 0000:03:00.0 eth0: RTL8168evl/8111evl, XX:XX:XX:XX:XX:XX, XID 2c9, IRQ 34
[ 1.904982] r8169 0000:03:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko]
[ 1.906756] ahci 0000:00:11.0: version 3.0
[ 1.906957] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 4 ports 6 Gbps 0xf impl SATA mode
[ 1.906960] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
[ 1.907751] scsi host1: ahci
[ 1.907899] scsi host2: ahci
[ 1.908133] scsi host3: ahci
[ 1.908380] scsi host4: ahci
[ 1.908471] ata1: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b100 irq 19
[ 1.908473] ata2: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b180 irq 19
[ 1.908474] ata3: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b200 irq 19
[ 1.908476] ata4: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b280 irq 19
[ 1.917163] hid-generic 0003:C0F4:01B0.0001: input,hidraw0: USB HID v1.10 Keyboard [USB usb keyboard] on usb-0000:00:16.0-1/input0
[ 1.920278] r8169 0000:03:00.0 enp3s0: renamed from eth0
[ 1.921417] input: USB usb keyboard Consumer Control as /devices/pci0000:00/0000:00:16.0/usb7/7-1/7-1:1.1/0003:C0F4:01B0.0002/input/input3
[ 1.951075] tsc: Refined TSC clocksource calibration: 4018.467 MHz
[ 1.951083] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x39ec817114a, max_idle_ns: 440795242737 ns
[ 1.951673] clocksource: Switched to clocksource tsc
[ 1.971360] AMD-Vi: AMD IOMMUv2 driver by Joerg Roedel <XXX@XXX>
[ 1.971360] AMD-Vi: AMD IOMMUv2 functionality not available on this system
[ 1.973102] input: USB usb keyboard System Control as /devices/pci0000:00/0000:00:16.0/usb7/7-1/7-1:1.1/0003:C0F4:01B0.0002/input/input4
[ 1.973156] hid-generic 0003:C0F4:01B0.0002: input,hidraw1: USB HID v1.10 Device [USB usb keyboard] on usb-0000:00:16.0-1/input1
[ 2.213131] ata2: SATA link down (SStatus 0 SControl 300)
[ 2.213163] ata3: SATA link down (SStatus 0 SControl 300)
[ 2.213277] ata4: SATA link down (SStatus 0 SControl 300)
[ 2.242897] [drm] amdgpu kernel modesetting enabled.
[ 2.243064] CRAT table not found
[ 2.243070] Virtual CRAT table created for CPU
[ 2.243088] amdgpu: Topology: Add CPU node
[ 2.243184] checking generic (c0000000 1e8000) vs hw (c0000000 10000000)
[ 2.243185] fb: switching to amdgpudrmfb from EFI VGA
[ 2.243246] amdgpu 0000:01:00.0: vgaarb: deactivate vga console
[ 2.243360] [drm] initializing kernel modesetting (POLARIS12 0x1002:0x699F 0x1458:0x22FE 0xC7).
[ 2.243362] amdgpu 0000:01:00.0: Trusted Memory Zone (TMZ) feature not supported
[ 2.243369] [drm] register mmio base: 0xFEA00000
[ 2.243369] [drm] register mmio size: 262144
[ 2.243371] [drm] PCIE atomic ops is not supported
[ 2.243375] [drm] add ip block number 0 <vi_common>
[ 2.243376] [drm] add ip block number 1 <gmc_v8_0>
[ 2.243396] [drm] add ip block number 2 <tonga_ih>
[ 2.243397] [drm] add ip block number 3 <gfx_v8_0>
[ 2.243398] [drm] add ip block number 4 <sdma_v3_0>
[ 2.243400] [drm] add ip block number 5 <powerplay>
[ 2.243400] [drm] add ip block number 6 <dm>
[ 2.243401] [drm] add ip block number 7 <uvd_v6_0>
[ 2.243402] [drm] add ip block number 8 <vce_v3_0>
[ 2.243404] kfd kfd: skipped device 1002:699f, PCI rejects atomics
[ 2.243652] amdgpu 0000:01:00.0: No more image in the PCI ROM
[ 2.243684] amdgpu: ATOM BIOS: xxx-xxx-xxx
[ 2.243699] [drm] UVD is enabled in VM mode
[ 2.243700] [drm] UVD ENC is enabled in VM mode
[ 2.243701] [drm] VCE enabled in VM mode
[ 2.243725] [drm] vm size is 64 GB, 2 levels, block size is 10-bit, fragment size is 9-bit
[ 2.243772] amdgpu 0000:01:00.0: VRAM: 2048M 0x000000F400000000 - 0x000000F47FFFFFFF (2048M used)
[ 2.243773] amdgpu 0000:01:00.0: GART: 256M 0x000000FF00000000 - 0x000000FF0FFFFFFF
[ 2.243778] [drm] Detected VRAM RAM=2048M, BAR=256M
[ 2.243778] [drm] RAM width 128bits GDDR5
[ 2.243832] [TTM] Zone kernel: Available graphics memory: 8090044 KiB
[ 2.243832] [TTM] Zone dma32: Available graphics memory: 2097152 KiB
[ 2.243833] [TTM] Initializing pool allocator
[ 2.243837] [TTM] Initializing DMA pool allocator
[ 2.243863] [drm] amdgpu: 2048M of VRAM memory ready
[ 2.243865] [drm] amdgpu: 3072M of GTT memory ready.
[ 2.243866] [drm] GART: num cpu pages 65536, num gpu pages 65536
[ 2.244363] [drm] PCIE GART of 256M enabled (table at 0x000000F4001D5000).
[ 2.244483] [drm] Chained IB support enabled!
[ 2.245533] amdgpu: hwmgr_sw_init smu backed is polaris10_smu
[ 2.245675] [drm] Found UVD firmware Version: 1.130 Family ID: 16
[ 2.246854] [drm] Found VCE firmware Version: 53.26 Binary ID: 3
[ 2.327535] [drm] DM_PPLIB: values for Engine clock
[ 2.327536] [drm] DM_PPLIB: 214000
[ 2.327536] [drm] DM_PPLIB: 551000
[ 2.327537] [drm] DM_PPLIB: 734000
[ 2.327537] [drm] DM_PPLIB: 980000
[ 2.327537] [drm] DM_PPLIB: 1046000
[ 2.327538] [drm] DM_PPLIB: 1098000
[ 2.327538] [drm] DM_PPLIB: 1124000
[ 2.327538] [drm] DM_PPLIB: 1183000
[ 2.327539] [drm] DM_PPLIB: Validation clocks:
[ 2.327539] [drm] DM_PPLIB: engine_max_clock: 118300
[ 2.327540] [drm] DM_PPLIB: memory_max_clock: 175000
[ 2.327540] [drm] DM_PPLIB: level : 8
[ 2.327541] [drm] DM_PPLIB: values for Memory clock
[ 2.327541] [drm] DM_PPLIB: 300000
[ 2.327542] [drm] DM_PPLIB: 625000
[ 2.327542] [drm] DM_PPLIB: 1750000
[ 2.327542] [drm] DM_PPLIB: Validation clocks:
[ 2.327543] [drm] DM_PPLIB: engine_max_clock: 118300
[ 2.327543] [drm] DM_PPLIB: memory_max_clock: 175000
[ 2.327543] [drm] DM_PPLIB: level : 8
[ 2.327602] [drm] dce110_link_encoder_construct: Failed to get encoder_cap_info from VBIOS with error code 4!
[ 2.327623] [drm] dce110_link_encoder_construct: Failed to get encoder_cap_info from VBIOS with error code 4!
[ 2.327635] [drm] Display Core initialized with v3.2.95!
[ 2.368082] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 2.368787] ata1.00: ATA-10: WDC WDS240G2G0A-00JH30, UF870400, max UDMA/133
[ 2.368788] ata1.00: 468862128 sectors, multi 1: LBA48 NCQ (depth 32)
[ 2.376620] ata1.00: configured for UDMA/133
[ 2.376726] scsi 1:0:0:0: Direct-Access ATA WDC WDS240G2G0A- 0400 PQ: 0 ANSI: 5
[ 2.382068] usb 7-2: new low-speed USB device number 3 using ohci-pci
[ 2.383037] scsi 1:0:0:0: Attached scsi generic sg0 type 0
[ 2.388809] sd 1:0:0:0: [sda] 468862128 512-byte logical blocks: (240 GB/224 GiB)
[ 2.388820] sd 1:0:0:0: [sda] Write Protect is off
[ 2.388822] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.388836] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.406083] [drm] UVD and UVD ENC initialized successfully.
[ 2.517030] [drm] VCE initialized successfully.
[ 2.517033] amdgpu 0000:01:00.0: SE 2, SH per SE 1, CU per SH 5, active_cu_number 8
[ 2.519209] [drm] fb mappable at 0xC0705000
[ 2.519210] [drm] vram apper at 0xC0000000
[ 2.519210] [drm] size 8294400
[ 2.519211] [drm] fb depth is 24
[ 2.519211] [drm] pitch is 7680
[ 2.519265] fbcon: amdgpudrmfb (fb0) is primary device
[ 2.519266] fbcon: Deferring console take-over
[ 2.519267] amdgpu 0000:01:00.0: [drm] fb0: amdgpudrmfb frame buffer device
[ 2.522276] sda: sda1 sda2 sda3
[ 2.522640] sd 1:0:0:0: [sda] Attached SCSI disk
[ 2.530022] [drm] Initialized amdgpu 3.39.0 20150101 for 0000:01:00.0 on minor 0
[ 2.546131] usb 7-2: New USB device found, idVendor=10c4, idProduct=8108, bcdDevice= 0.00
[ 2.546133] usb 7-2: New USB device strings: Mfr=1, Product=2, SerialNumber=...
[ 2.546134] usb 7-2: Product: USB OPTICAL MOUSE
[ 2.546135] usb 7-2: Manufacturer: YSPRINGTECH
[ 2.553384] input: YSPRINGTECH USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:16.0/usb7/7-2/7-2:1.0/0003:10C4:8108.0003/input/input5
[ 2.553468] hid-generic 0003:10C4:8108.0003: input,hidraw2: USB HID v1.11 Mouse [YSPRINGTECH USB OPTICAL MOUSE] on usb-0000:00:16.0-2/input0
[ 2.848075] scsi 0:0:0:0: Direct-Access Kingston DataTraveler 3.0 PQ: 0 ANSI: 6
[ 2.848390] sd 0:0:0:0: Attached scsi generic sg1 type 0
[ 2.849057] sd 0:0:0:0: [sdb] 30218842 512-byte logical blocks: (15.5 GB/14.4 GiB)
[ 2.849669] sd 0:0:0:0: [sdb] Write Protect is off
[ 2.849671] sd 0:0:0:0: [sdb] Mode Sense: 4f 00 00 00
[ 2.850294] sd 0:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 2.869721] sdb: sdb1 sdb2
[ 2.873163] sd 0:0:0:0: [sdb] Attached SCSI removable disk
[ 2.880775] random: fast init done
[ 2.929083] usb 3-3: new high-speed USB device number 4 using ehci-pci
[ 3.060879] usb 3-3: New USB device found, idVendor=1224, idProduct=2a25, bcdDevice= 1.00
[ 3.060881] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=...
[ 3.060882] usb 3-3: Product: USB PHY 2.0
[ 3.060883] usb 3-3: Manufacturer: Jieli Technology
[ 3.595988] PM: Image not found (code -22)
[ 3.789209] SGI XFS with ACLs, security attributes, quota, no debug enabled
[ 3.791358] XFS (dm-0): Mounting V5 Filesystem
[ 3.828761] XFS (dm-0): Ending clean mount
[ 4.119932] printk: systemd: 16 output lines suppressed due to ratelimiting
[ 4.364437] SELinux: policy capability network_peer_controls=1
[ 4.364438] SELinux: policy capability open_perms=1
[ 4.364438] SELinux: policy capability extended_socket_class=1
[ 4.364439] SELinux: policy capability always_check_network=0
[ 4.364439] SELinux: policy capability cgroup_seclabel=1
[ 4.364440] SELinux: policy capability nnp_nosuid_transition=1
[ 4.389055] systemd[1]: Successfully loaded SELinux policy in 137.962ms.
[ 4.491432] systemd[1]: Relabelled /dev, /run and /sys/fs/cgroup in 32.702ms.
[ 4.494368] systemd[1]: systemd 239 (239-45.el8_4.3) running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=legacy)
[ 4.506234] systemd[1]: Detected architecture x86-64.
[ 4.509060] systemd[1]: Set hostname to ...
[ 4.995437] systemd[1]: systemd-journald.service: Succeeded.
[ 4.996149] systemd[1]: initrd-switch-root.service: Succeeded.
[ 4.996446] systemd[1]: Stopped Switch Root.
[ 4.996999] systemd[1]: systemd-journald.service: Service has no hold-off time (RestartSec=0), scheduling restart.
[ 4.997068] systemd[1]: systemd-journald.service: Scheduled restart job, restart counter is at 1.
[ 4.997149] systemd[1]: Stopped Journal Service.
[ 4.997912] systemd[1]: Starting Journal Service...
[ 5.022041] Adding 8257532k swap on /dev/mapper/XXXXXXXXXX Priority:-2 extents:1 across:8257532k SSFS
[ 5.300444] acpi_cpufreq: overriding BIOS provided _PSD data
[ 5.336971] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 5.336998] piix4_smbus 0000:00:14.0: Using register 0x2c for SMBus port selection
[ 5.337132] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
[ 5.344135] input: PC Speaker as /devices/platform/pcspkr/input/input6
[ 5.352444] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver
[ 5.352558] sp5100-tco sp5100-tco: Using 0xfed80b00 for watchdog MMIO address
[ 5.352863] sp5100-tco sp5100-tco: initialized. heartbeat=60 sec (nowayout=0)
[ 5.431801] videodev: Linux video capture interface: v2.00
[ 5.460033] usb 3-3: current rate 0 is different from the runtime rate 8000
[ 5.467202] usb 3-3: current rate 0 is different from the runtime rate 16000
[ 5.467730] usb 3-3: current rate 0 is different from the runtime rate 44100
[ 5.469337] usb 3-3: current rate 0 is different from the runtime rate 48000
[ 5.470701] usb 3-3: Warning! Unlikely big volume range (=4096), cval->res is probably wrong.
[ 5.470703] usb 3-3: [3] FU [Mic Capture Volume] ch = 1, val = 0/4096/1
[ 5.470987] usbcore: registered new interface driver snd-usb-audio
[ 5.519247] snd_hda_intel 0000:01:00.1: enabling device (0000 -> 0002)
[ 5.519307] snd_hda_intel 0000:01:00.1: Force to non-snoop mode
[ 5.529412] uvcvideo: Found UVC 1.00 device USB PHY 2.0 (1224:2a25)
[ 5.541743] snd_hda_intel 0000:01:00.1: bound 0000:01:00.0 (ops amdgpu_dm_audio_component_bind_ops [amdgpu])
[ 5.550097] input: USB PHY 2.0: USB CAMERA as /devices/pci0000:00/0000:00:16.2/usb3/3-3/3-3:1.0/input/input12
[ 5.550257] usbcore: registered new interface driver uvcvideo
[ 5.550259] USB Video Class driver (1.1.1)
[ 5.550304] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card2/input7
[ 5.550375] input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card2/input8
[ 5.550440] input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card2/input9
[ 5.550498] input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card2/input10
[ 5.550545] input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card2/input11
[ 5.553778] snd_hda_codec_via hdaudioC1D0: autoconfig for VT2020: line_outs=4 (0x24/0x25/0x26/0x27/0x0) type:line
[ 5.553780] snd_hda_codec_via hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 5.553781] snd_hda_codec_via hdaudioC1D0: hp_outs=1 (0x28/0x0/0x0/0x0/0x0)
[ 5.553782] snd_hda_codec_via hdaudioC1D0: mono: mono_out=0x0
[ 5.553783] snd_hda_codec_via hdaudioC1D0: dig-out=0x2d/0x2e
[ 5.553784] snd_hda_codec_via hdaudioC1D0: inputs:
[ 5.553785] snd_hda_codec_via hdaudioC1D0: Front Mic=0x29
[ 5.553786] snd_hda_codec_via hdaudioC1D0: Rear Mic=0x2b
[ 5.553787] snd_hda_codec_via hdaudioC1D0: Line=0x2a
[ 5.553845] random: crng init done
[ 5.553847] random: 7 urandom warning(s) missed due to ratelimiting
[ 5.575872] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input13
[ 5.575944] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input14
[ 5.575999] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card1/input15
[ 5.576269] input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card1/input16
[ 5.576331] input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card1/input17
[ 5.576407] input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card1/input18
[ 5.576473] input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card1/input19
[ 5.576536] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input20
[ 5.581544] SVM: kvm: Nested Paging enabled
[ 5.591297] MCE: In-kernel MCE decoding enabled.
[ 5.598496] EDAC amd64: F15h detected (node 0).
[ 5.598523] EDAC MC: DCT0 chip selects:
[ 5.598524] EDAC amd64: MC: 0: 4096MB 1: 4096MB
[ 5.598525] EDAC amd64: MC: 2: 0MB 3: 0MB
[ 5.598525] EDAC amd64: MC: 4: 0MB 5: 0MB
[ 5.598526] EDAC amd64: MC: 6: 0MB 7: 0MB
[ 5.598526] EDAC MC: DCT1 chip selects:
[ 5.598527] EDAC amd64: MC: 0: 4096MB 1: 4096MB
[ 5.598528] EDAC amd64: MC: 2: 0MB 3: 0MB
[ 5.598529] EDAC amd64: MC: 4: 0MB 5: 0MB
[ 5.598529] EDAC amd64: MC: 6: 0MB 7: 0MB
[ 5.598530] EDAC amd64: using x4 syndromes.
[ 5.598536] EDAC amd64: Node 0: DRAM ECC disabled.
[ 5.598537] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
[ 5.617613] EDAC amd64: F15h detected (node 0).
[ 5.617644] EDAC MC: DCT0 chip selects:
[ 5.617645] EDAC amd64: MC: 0: 4096MB 1: 4096MB
[ 5.617646] EDAC amd64: MC: 2: 0MB 3: 0MB
[ 5.617647] EDAC amd64: MC: 4: 0MB 5: 0MB
[ 5.617648] EDAC amd64: MC: 6: 0MB 7: 0MB
[ 5.617648] EDAC MC: DCT1 chip selects:
[ 5.617649] EDAC amd64: MC: 0: 4096MB 1: 4096MB
[ 5.617650] EDAC amd64: MC: 2: 0MB 3: 0MB
[ 5.617650] EDAC amd64: MC: 4: 0MB 5: 0MB
[ 5.617651] EDAC amd64: MC: 6: 0MB 7: 0MB
[ 5.617651] EDAC amd64: using x4 syndromes.
[ 5.617672] EDAC amd64: Node 0: DRAM ECC disabled.
[ 5.617673] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
[ 5.635557] EDAC amd64: F15h detected (node 0).
[ 5.635590] EDAC MC: DCT0 chip selects:
[ 5.635591] EDAC amd64: MC: 0: 4096MB 1: 4096MB
[ 5.635591] EDAC amd64: MC: 2: 0MB 3: 0MB
[ 5.635592] EDAC amd64: MC: 4: 0MB 5: 0MB
[ 5.635593] EDAC amd64: MC: 6: 0MB 7: 0MB
[ 5.635593] EDAC MC: DCT1 chip selects:
[ 5.635594] EDAC amd64: MC: 0: 4096MB 1: 4096MB
[ 5.635595] EDAC amd64: MC: 2: 0MB 3: 0MB
[ 5.635595] EDAC amd64: MC: 4: 0MB 5: 0MB
[ 5.635596] EDAC amd64: MC: 6: 0MB 7: 0MB
[ 5.635596] EDAC amd64: using x4 syndromes.
[ 5.635610] EDAC amd64: Node 0: DRAM ECC disabled.
[ 5.635611] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
[ 5.659772] EDAC amd64: F15h detected (node 0).
[ 5.659797] EDAC MC: DCT0 chip selects:
[ 5.659797] EDAC amd64: MC: 0: 4096MB 1: 4096MB
[ 5.659798] EDAC amd64: MC: 2: 0MB 3: 0MB
[ 5.659799] EDAC amd64: MC: 4: 0MB 5: 0MB
[ 5.659799] EDAC amd64: MC: 6: 0MB 7: 0MB
[ 5.659800] EDAC MC: DCT1 chip selects:
[ 5.659800] EDAC amd64: MC: 0: 4096MB 1: 4096MB
[ 5.659801] EDAC amd64: MC: 2: 0MB 3: 0MB
[ 5.659801] EDAC amd64: MC: 4: 0MB 5: 0MB
[ 5.659802] EDAC amd64: MC: 6: 0MB 7: 0MB
[ 5.659802] EDAC amd64: using x4 syndromes.
[ 5.659809] EDAC amd64: Node 0: DRAM ECC disabled.
[ 5.659810] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
[ 5.680683] EDAC amd64: F15h detected (node 0).
[ 5.680706] EDAC MC: DCT0 chip selects:
[ 5.680707] EDAC amd64: MC: 0: 4096MB 1: 4096MB
[ 5.680708] EDAC amd64: MC: 2: 0MB 3: 0MB
[ 5.680709] EDAC amd64: MC: 4: 0MB 5: 0MB
[ 5.680709] EDAC amd64: MC: 6: 0MB 7: 0MB
[ 5.680709] EDAC MC: DCT1 chip selects:
[ 5.680710] EDAC amd64: MC: 0: 4096MB 1: 4096MB
[ 5.680711] EDAC amd64: MC: 2: 0MB 3: 0MB
[ 5.680711] EDAC amd64: MC: 4: 0MB 5: 0MB
[ 5.680712] EDAC amd64: MC: 6: 0MB 7: 0MB
[ 5.680712] EDAC amd64: using x4 syndromes.
[ 5.680722] EDAC amd64: Node 0: DRAM ECC disabled.
[ 5.680723] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
[ 5.700733] EDAC amd64: F15h detected (node 0).
[ 5.700761] EDAC MC: DCT0 chip selects:
[ 5.700762] EDAC amd64: MC: 0: 4096MB 1: 4096MB
[ 5.700763] EDAC amd64: MC: 2: 0MB 3: 0MB
[ 5.700764] EDAC amd64: MC: 4: 0MB 5: 0MB
[ 5.700764] EDAC amd64: MC: 6: 0MB 7: 0MB
[ 5.700765] EDAC MC: DCT1 chip selects:
[ 5.700766] EDAC amd64: MC: 0: 4096MB 1: 4096MB
[ 5.700767] EDAC amd64: MC: 2: 0MB 3: 0MB
[ 5.700767] EDAC amd64: MC: 4: 0MB 5: 0MB
[ 5.700768] EDAC amd64: MC: 6: 0MB 7: 0MB
[ 5.700769] EDAC amd64: using x4 syndromes.
[ 5.700777] EDAC amd64: Node 0: DRAM ECC disabled.
[ 5.700779] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
[ 5.720731] EDAC amd64: F15h detected (node 0).
[ 5.720757] EDAC MC: DCT0 chip selects:
[ 5.720758] EDAC amd64: MC: 0: 4096MB 1: 4096MB
[ 5.720759] EDAC amd64: MC: 2: 0MB 3: 0MB
[ 5.720760] EDAC amd64: MC: 4: 0MB 5: 0MB
[ 5.720760] EDAC amd64: MC: 6: 0MB 7: 0MB
[ 5.720761] EDAC MC: DCT1 chip selects:
[ 5.720762] EDAC amd64: MC: 0: 4096MB 1: 4096MB
[ 5.720763] EDAC amd64: MC: 2: 0MB 3: 0MB
[ 5.720763] EDAC amd64: MC: 4: 0MB 5: 0MB
[ 5.720764] EDAC amd64: MC: 6: 0MB 7: 0MB
[ 5.720764] EDAC amd64: using x4 syndromes.
[ 5.720775] EDAC amd64: Node 0: DRAM ECC disabled.
[ 5.720776] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
[ 5.737680] EDAC amd64: F15h detected (node 0).
[ 5.737707] EDAC MC: DCT0 chip selects:
[ 5.737708] EDAC amd64: MC: 0: 4096MB 1: 4096MB
[ 5.737709] EDAC amd64: MC: 2: 0MB 3: 0MB
[ 5.737710] EDAC amd64: MC: 4: 0MB 5: 0MB
[ 5.737711] EDAC amd64: MC: 6: 0MB 7: 0MB
[ 5.737711] EDAC MC: DCT1 chip selects:
[ 5.737712] EDAC amd64: MC: 0: 4096MB 1: 4096MB
[ 5.737712] EDAC amd64: MC: 2: 0MB 3: 0MB
[ 5.737713] EDAC amd64: MC: 4: 0MB 5: 0MB
[ 5.737714] EDAC amd64: MC: 6: 0MB 7: 0MB
[ 5.737715] EDAC amd64: using x4 syndromes.
[ 5.737724] EDAC amd64: Node 0: DRAM ECC disabled.
[ 5.737724] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
[ 6.627840] loop: module loaded
[ 6.629338] XFS (dm-2): Mounting V5 Filesystem
[ 6.632478] XFS (sda2): Mounting V5 Filesystem
[ 6.675115] XFS (dm-2): Ending clean mount
[ 6.677852] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 6.783877] XFS (sda2): Ending clean mount
[ 6.986783] RPC: Registered named UNIX socket transport module.
[ 6.986784] RPC: Registered udp transport module.
[ 6.986784] RPC: Registered tcp transport module.
[ 6.986785] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 8.467978] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[ 8.470772] RTL8211E Gigabit Ethernet r8169-300:00: attached PHY driver [RTL8211E Gigabit Ethernet] (mii_bus:phy_addr=r8169-300:00, irq=IGNORE)
[ 8.687961] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[ 8.689697] r8169 0000:03:00.0 enp3s0: Link is Down
[ 8.697684] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[ 11.638977] r8169 0000:03:00.0 enp3s0: Link is Up - 1Gbps/Full - flow control rx/tx
[ 11.638985] IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0: link becomes ready
[ 13.154879] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[ 13.175092] tun: Universal TUN/TAP device driver, 1.6
[ 13.176807] virbr0: port 1(virbr0-nic) entered blocking state
[ 13.176809] virbr0: port 1(virbr0-nic) entered disabled state
[ 13.176852] device virbr0-nic entered promiscuous mode
[ 13.647063] virbr0: port 1(virbr0-nic) entered blocking state
[ 13.647065] virbr0: port 1(virbr0-nic) entered listening state
[ 13.690222] virbr0: port 1(virbr0-nic) entered disabled state
[ 14.246264] usb 3-3: current rate 0 is different from the runtime rate 44100
[ 14.249633] usb 3-3: current rate 0 is different from the runtime rate 44100
[ 14.252756] usb 3-3: current rate 0 is different from the runtime rate 44100
[ 20.545922] usb 3-3: current rate 0 is different from the runtime rate 44100
[ 20.549171] usb 3-3: current rate 0 is different from the runtime rate 44100
[ 20.551545] usb 3-3: current rate 0 is different from the runtime rate 44100
[ 30.401259] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 30.403262] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 30.416007] ISO 9660 Extensions: RRIP_1991A
[ 228.980268] SELinux: Converting 570 SID table entries...
[ 228.981682] SELinux: policy capability network_peer_controls=1
[ 228.981682] SELinux: policy capability open_perms=1
[ 228.981683] SELinux: policy capability extended_socket_class=1
[ 228.981683] SELinux: policy capability always_check_network=0
[ 228.981684] SELinux: policy capability cgroup_seclabel=1
[ 228.981684] SELinux: policy capability nnp_nosuid_transition=1
[ 232.348023] SELinux: Converting 570 SID table entries...
[ 232.349438] SELinux: policy capability network_peer_controls=1
[ 232.349439] SELinux: policy capability open_perms=1
[ 232.349440] SELinux: policy capability extended_socket_class=1
[ 232.349440] SELinux: policy capability always_check_network=0
[ 232.349441] SELinux: policy capability cgroup_seclabel=1
[ 232.349441] SELinux: policy capability nnp_nosuid_transition=1
[ 235.867063] SELinux: Converting 570 SID table entries...
[ 235.868507] SELinux: policy capability network_peer_controls=1
[ 235.868507] SELinux: policy capability open_perms=1
[ 235.868508] SELinux: policy capability extended_socket_class=1
[ 235.868508] SELinux: policy capability always_check_network=0
[ 235.868509] SELinux: policy capability cgroup_seclabel=1
[ 235.868509] SELinux: policy capability nnp_nosuid_transition=1
[ 318.274705] usb 3-3: current rate 0 is different from the runtime rate 44100