[ 0.000000] Linux version 6.8.0-44-generic (XXX@XXX) (x86_64-linux-gnu-gcc-13 (Ubuntu 13.2.0-23ubuntu4) 13.2.0, GNU ld (GNU Binutils for Ubuntu) 2.42) #44-Ubuntu SMP PREEMPT_DYNAMIC Tue Aug 13 13:35:26 UTC 2024 (Ubuntu 6.8.0-44.44-generic 6.8.12) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-6.8.0-44-generic root=UUID=HASH_0DE-4EF9-7EE1-9C9E-BFD2D235025E ro quiet splash [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Hygon HygonGenuine [ 0.000000] Centaur CentaurHauls [ 0.000000] zhaoxin Shanghai [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000003efff] usable [ 0.000000] BIOS-e820: [mem 0x000000000003f000-0x000000000003ffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000040000-0x000000000009dfff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009e000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000000fffffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000010000000-0x0000000012150fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000012151000-0x00000000767c2fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000767c3000-0x00000000798ebfff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000798ec000-0x00000000798fbfff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000798fc000-0x00000000799bbfff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000799bc000-0x0000000079e5dfff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000079e5e000-0x000000007a1d8fff] usable [ 0.000000] BIOS-e820: [mem 0x000000007a1d9000-0x000000007a1d9fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000007a1da000-0x000000007a1f3fff] reserved [ 0.000000] BIOS-e820: [mem 0x000000007a1f4000-0x000000007a763fff] usable [ 0.000000] BIOS-e820: [mem 0x000000007a764000-0x000000007a765fff] reserved [ 0.000000] BIOS-e820: [mem 0x000000007a766000-0x000000007affffff] usable [ 0.000000] BIOS-e820: [mem 0x000000007b000000-0x000000007fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000d0000000-0x00000000d0ffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fe042000-0x00000000fe044fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fe900000-0x00000000fe902fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed01000-0x00000000fed01fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000017fffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] APIC: Static calls initialized [ 0.000000] e820: update [mem 0x6503d018-0x6504d057] usable ==> usable [ 0.000000] e820: update [mem 0x6503d018-0x6504d057] usable ==> usable [ 0.000000] extended physical RAM map: [ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x000000000003efff] usable [ 0.000000] reserve setup_data: [mem 0x000000000003f000-0x000000000003ffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000000040000-0x000000000009dfff] usable [ 0.000000] reserve setup_data: [mem 0x000000000009e000-0x00000000000fffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x000000000fffffff] usable [ 0.000000] reserve setup_data: [mem 0x0000000010000000-0x0000000012150fff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000012151000-0x000000006503d017] usable [ 0.000000] reserve setup_data: [mem 0x000000006503d018-0x000000006504d057] usable [ 0.000000] reserve setup_data: [mem 0x000000006504d058-0x00000000767c2fff] usable [ 0.000000] reserve setup_data: [mem 0x00000000767c3000-0x00000000798ebfff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000798ec000-0x00000000798fbfff] ACPI data [ 0.000000] reserve setup_data: [mem 0x00000000798fc000-0x00000000799bbfff] ACPI NVS [ 0.000000] reserve setup_data: [mem 0x00000000799bc000-0x0000000079e5dfff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000079e5e000-0x000000007a1d8fff] usable [ 0.000000] reserve setup_data: [mem 0x000000007a1d9000-0x000000007a1d9fff] ACPI NVS [ 0.000000] reserve setup_data: [mem 0x000000007a1da000-0x000000007a1f3fff] reserved [ 0.000000] reserve setup_data: [mem 0x000000007a1f4000-0x000000007a763fff] usable [ 0.000000] reserve setup_data: [mem 0x000000007a764000-0x000000007a765fff] reserved [ 0.000000] reserve setup_data: [mem 0x000000007a766000-0x000000007affffff] usable [ 0.000000] reserve setup_data: [mem 0x000000007b000000-0x000000007fffffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000d0000000-0x00000000d0ffffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000e0000000-0x00000000efffffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fe042000-0x00000000fe044fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fe900000-0x00000000fe902fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fed01000-0x00000000fed01fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000ff800000-0x00000000ffffffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000017fffffff] usable [ 0.000000] efi: EFI v2.5 by American Megatrends [ 0.000000] efi: TPMFinalLog=0x7998a000 ACPI=0x79967000 ACPI 2.0=0x79967000 SMBIOS=0x79c07000 SMBIOS 3.0=0x79c06000 ESRT=0x757dfbd8 MOKvar=0x79cde000 INITRD=0x6b6b4898 TPMEventLog=0x6504e018 [ 0.000000] efi: Remove mem36: MMIO range=[0xd0000000-0xd0ffffff] (16MB) from e820 map [ 0.000000] e820: remove [mem 0xd0000000-0xd0ffffff] reserved [ 0.000000] efi: Remove mem37: MMIO range=[0xe0000000-0xefffffff] (256MB) from e820 map [ 0.000000] e820: remove [mem 0xe0000000-0xefffffff] reserved [ 0.000000] efi: Not removing mem38: MMIO range=[0xfe042000-0xfe042fff] (4KB) from e820 map [ 0.000000] efi: Not removing mem39: MMIO range=[0xfe043000-0xfe043fff] (4KB) from e820 map [ 0.000000] efi: Not removing mem40: MMIO range=[0xfe044000-0xfe044fff] (4KB) from e820 map [ 0.000000] efi: Not removing mem41: MMIO range=[0xfe900000-0xfe902fff] (12KB) from e820 map [ 0.000000] efi: Not removing mem42: MMIO range=[0xfec00000-0xfec00fff] (4KB) from e820 map [ 0.000000] efi: Not removing mem43: MMIO range=[0xfed01000-0xfed01fff] (4KB) from e820 map [ 0.000000] efi: Not removing mem44: MMIO range=[0xfee00000-0xfee00fff] (4KB) from e820 map [ 0.000000] efi: Remove mem45: MMIO range=[0xff800000-0xffffffff] (8MB) from e820 map [ 0.000000] e820: remove [mem 0xff800000-0xffffffff] reserved [ 0.000000] secureboot: Secure boot disabled [ 0.000000] SMBIOS 3.0.0 present. [ 0.000000] DMI: ALLDOCUBE i35AS/i35AS, BIOS 0.7 12/27/2019 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 1094.400 MHz processor [ 0.000049] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000060] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000095] last_pfn = 0x180000 max_arch_pfn = 0x400000000 [ 0.000114] MTRR map: 9 entries (5 fixed + 4 variable; max 25), built from 10 variable MTRRs [ 0.000125] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.000277] last_pfn = 0x7b000 max_arch_pfn = 0x400000000 [ 0.011204] esrt: Reserving ESRT space from 0x00000000757dfbd8 to 0x00000000757dfc10. [ 0.011228] e820: update [mem 0x757df000-0x757dffff] usable ==> reserved [ 0.011288] Using GB pages for direct mapping [ 0.013146] secureboot: Secure boot disabled [ 0.013152] RAMDISK: [mem 0x65059000-0x694b0fff] [ 0.015014] ACPI: Early table checksum verification disabled [ 0.015029] ACPI: RSDP 0x0000000079967000 000024 (v02 ALASKA) [ 0.015048] ACPI: XSDT 0x00000000799670C0 0000EC (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.015069] ACPI: FACP 0x0000000079971B30 000114 (v06 ALASKA A M I 01072009 AMI 00010013) [ 0.015093] ACPI: DSDT 0x0000000079967250 00A8D9 (v02 ALASKA A M I 01072009 INTL 20120913) [ 0.015107] ACPI: FACS 0x00000000799BB080 000040 [ 0.015117] ACPI: FPDT 0x0000000079971C50 000044 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.015128] ACPI: FIDT 0x0000000079971CA0 00009C (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.015140] ACPI: MCFG 0x0000000079971D40 00003C (v01 ALASKA A M I 01072009 MSFT 00000097) [ 0.015151] ACPI: DBG2 0x0000000079971D80 000072 (v00 INTEL EDK2 00000003 BRXT 0100000D) [ 0.015162] ACPI: DBGP 0x0000000079971E00 000034 (v01 INTEL EDK2 00000003 BRXT 0100000D) [ 0.015174] ACPI: HPET 0x0000000079971E40 000038 (v01 INTEL EDK2 00000003 BRXT 0100000D) [ 0.015185] ACPI: LPIT 0x0000000079971E80 00005C (v01 INTEL EDK2 00000003 BRXT 0100000D) [ 0.015196] ACPI: APIC 0x0000000079971EE0 000084 (v03 INTEL EDK2 00000003 BRXT 0100000D) [ 0.015208] ACPI: NPKT 0x0000000079971F70 000065 (v01 INTEL EDK2 00000003 BRXT 0100000D) [ 0.015219] ACPI: PRAM 0x0000000079971FE0 000030 (v01 INTEL EDK2 00000003 BRXT 0100000D) [ 0.015231] ACPI: SSDT 0x0000000079972010 004334 (v02 INTEL DptfTab 00000003 BRXT 0100000D) [ 0.015243] ACPI: SSDT 0x0000000079976350 0013D5 (v02 INTEL RVPRtd3 00000003 BRXT 0100000D) [ 0.015254] ACPI: SSDT 0x0000000079977730 00077D (v02 INTEL UsbCTabl 00000003 BRXT 0100000D) [ 0.015266] ACPI: SSDT 0x0000000079977EB0 001ACB (v01 Intel_ Platform 00001000 INTL 20120913) [ 0.015277] ACPI: SSDT 0x0000000079979980 0003F7 (v02 PmRef Cpu0Ist 00003000 INTL 20120913) [ 0.015289] ACPI: SSDT 0x0000000079979D80 00072B (v02 CpuRef CpuSsdt 00003000 INTL 20120913) [ 0.015301] ACPI: SSDT 0x000000007997A4B0 00032D (v02 PmRef Cpu0Tst 00003000 INTL 20120913) [ 0.015312] ACPI: SSDT 0x000000007997A7E0 00017C (v02 PmRef ApTst 00003000 INTL 20120913) [ 0.015323] ACPI: SSDT 0x000000007997A960 002760 (v02 SaSsdt SaSsdt 00003000 INTL 20120913) [ 0.015335] ACPI: UEFI 0x000000007997D0C0 000042 (v01 ALASKA A M I 00000000 00000000) [ 0.015346] ACPI: BGRT 0x000000007997D110 000038 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.015358] ACPI: TPM2 0x000000007997D150 000034 (v04 ALASKA A M I 00000001 AMI 00000000) [ 0.015369] ACPI: WDAT 0x000000007997D190 000104 (v01 00000000 00000000) [ 0.015380] ACPI: NHLT 0x000000007997D2A0 00002D (v00 INTEL EDK2 00000002 01000013) [ 0.015390] ACPI: Reserving FACP table memory at [mem 0x79971b30-0x79971c43] [ 0.015396] ACPI: Reserving DSDT table memory at [mem 0x79967250-0x79971b28] [ 0.015400] ACPI: Reserving FACS table memory at [mem 0x799bb080-0x799bb0bf] [ 0.015403] ACPI: Reserving FPDT table memory at [mem 0x79971c50-0x79971c93] [ 0.015407] ACPI: Reserving FIDT table memory at [mem 0x79971ca0-0x79971d3b] [ 0.015411] ACPI: Reserving MCFG table memory at [mem 0x79971d40-0x79971d7b] [ 0.015415] ACPI: Reserving DBG2 table memory at [mem 0x79971d80-0x79971df1] [ 0.015418] ACPI: Reserving DBGP table memory at [mem 0x79971e00-0x79971e33] [ 0.015422] ACPI: Reserving HPET table memory at [mem 0x79971e40-0x79971e77] [ 0.015426] ACPI: Reserving LPIT table memory at [mem 0x79971e80-0x79971edb] [ 0.015429] ACPI: Reserving APIC table memory at [mem 0x79971ee0-0x79971f63] [ 0.015433] ACPI: Reserving NPKT table memory at [mem 0x79971f70-0x79971fd4] [ 0.015437] ACPI: Reserving PRAM table memory at [mem 0x79971fe0-0x7997200f] [ 0.015440] ACPI: Reserving SSDT table memory at [mem 0x79972010-0x79976343] [ 0.015444] ACPI: Reserving SSDT table memory at [mem 0x79976350-0x79977724] [ 0.015448] ACPI: Reserving SSDT table memory at [mem 0x79977730-0x79977eac] [ 0.015451] ACPI: Reserving SSDT table memory at [mem 0x79977eb0-0x7997997a] [ 0.015455] ACPI: Reserving SSDT table memory at [mem 0x79979980-0x79979d76] [ 0.015459] ACPI: Reserving SSDT table memory at [mem 0x79979d80-0x7997a4aa] [ 0.015462] ACPI: Reserving SSDT table memory at [mem 0x7997a4b0-0x7997a7dc] [ 0.015466] ACPI: Reserving SSDT table memory at [mem 0x7997a7e0-0x7997a95b] [ 0.015470] ACPI: Reserving SSDT table memory at [mem 0x7997a960-0x7997d0bf] [ 0.015474] ACPI: Reserving UEFI table memory at [mem 0x7997d0c0-0x7997d101] [ 0.015477] ACPI: Reserving BGRT table memory at [mem 0x7997d110-0x7997d147] [ 0.015481] ACPI: Reserving TPM2 table memory at [mem 0x7997d150-0x7997d183] [ 0.015485] ACPI: Reserving WDAT table memory at [mem 0x7997d190-0x7997d293] [ 0.015489] ACPI: Reserving NHLT table memory at [mem 0x7997d2a0-0x7997d2cc] [ 0.015912] No NUMA configuration found [ 0.015918] Faking a node at [mem 0x0000000000000000-0x000000017fffffff] [ 0.015957] NODE_DATA(0) allocated [mem 0x17ffd5000-0x17fffffff] [ 0.016891] Zone ranges: [ 0.016896] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.016903] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.016908] Normal [mem 0x0000000100000000-0x000000017fffffff] [ 0.016914] Device empty [ 0.016918] Movable zone start for each node [ 0.016926] Early memory node ranges [ 0.016928] node 0: [mem 0x0000000000001000-0x000000000003efff] [ 0.016934] node 0: [mem 0x0000000000040000-0x000000000009dfff] [ 0.016938] node 0: [mem 0x0000000000100000-0x000000000fffffff] [ 0.016942] node 0: [mem 0x0000000012151000-0x00000000767c2fff] [ 0.016947] node 0: [mem 0x0000000079e5e000-0x000000007a1d8fff] [ 0.016950] node 0: [mem 0x000000007a1f4000-0x000000007a763fff] [ 0.016954] node 0: [mem 0x000000007a766000-0x000000007affffff] [ 0.016958] node 0: [mem 0x0000000100000000-0x000000017fffffff] [ 0.016964] Initmem setup node 0 [mem 0x0000000000001000-0x000000017fffffff] [ 0.016982] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.016989] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.017079] On node 0, zone DMA: 98 pages in unavailable ranges [ 0.028372] On node 0, zone DMA32: 8529 pages in unavailable ranges [ 0.028960] On node 0, zone DMA32: 13979 pages in unavailable ranges [ 0.028997] On node 0, zone DMA32: 27 pages in unavailable ranges [ 0.029055] On node 0, zone DMA32: 2 pages in unavailable ranges [ 0.042018] On node 0, zone Normal: 20480 pages in unavailable ranges [ 0.042057] Reserving Intel graphics memory at [mem 0x7c000000-0x7fffffff] [ 0.042870] ACPI: PM-Timer IO Port: 0x408 [ 0.042913] ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1]) [ 0.042923] ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1]) [ 0.042927] ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1]) [ 0.042931] ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1]) [ 0.042972] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-119 [ 0.042985] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.042993] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.043008] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.043012] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.043043] e820: update [mem 0x71646000-0x72770fff] usable ==> reserved [ 0.043094] TSC deadline timer available [ 0.043098] smpboot: Allowing 4 CPUs, 2 hotplug CPUs [ 0.043189] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.043199] PM: hibernation: Registered nosave memory: [mem 0x0003f000-0x0003ffff] [ 0.043206] PM: hibernation: Registered nosave memory: [mem 0x0009e000-0x000fffff] [ 0.043213] PM: hibernation: Registered nosave memory: [mem 0x10000000-0x12150fff] [ 0.043220] PM: hibernation: Registered nosave memory: [mem 0x6503d000-0x6503dfff] [ 0.043227] PM: hibernation: Registered nosave memory: [mem 0x6504d000-0x6504dfff] [ 0.043234] PM: hibernation: Registered nosave memory: [mem 0x71646000-0x72770fff] [ 0.043241] PM: hibernation: Registered nosave memory: [mem 0x757df000-0x757dffff] [ 0.043248] PM: hibernation: Registered nosave memory: [mem 0x767c3000-0x798ebfff] [ 0.043251] PM: hibernation: Registered nosave memory: [mem 0x798ec000-0x798fbfff] [ 0.043255] PM: hibernation: Registered nosave memory: [mem 0x798fc000-0x799bbfff] [ 0.043258] PM: hibernation: Registered nosave memory: [mem 0x799bc000-0x79e5dfff] [ 0.043265] PM: hibernation: Registered nosave memory: [mem 0x7a1d9000-0x7a1d9fff] [ 0.043268] PM: hibernation: Registered nosave memory: [mem 0x7a1da000-0x7a1f3fff] [ 0.043275] PM: hibernation: Registered nosave memory: [mem 0x7a764000-0x7a765fff] [ 0.043283] PM: hibernation: Registered nosave memory: [mem 0x7b000000-0x7fffffff] [ 0.043286] PM: hibernation: Registered nosave memory: [mem 0x80000000-0xfe041fff] [ 0.043289] PM: hibernation: Registered nosave memory: [mem 0xfe042000-0xfe044fff] [ 0.043293] PM: hibernation: Registered nosave memory: [mem 0xfe045000-0xfe8fffff] [ 0.043296] PM: hibernation: Registered nosave memory: [mem 0xfe900000-0xfe902fff] [ 0.043299] PM: hibernation: Registered nosave memory: [mem 0xfe903000-0xfebfffff] [ 0.043302] PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.043305] PM: hibernation: Registered nosave memory: [mem 0xfec01000-0xfed00fff] [ 0.043309] PM: hibernation: Registered nosave memory: [mem 0xfed01000-0xfed01fff] [ 0.043312] PM: hibernation: Registered nosave memory: [mem 0xfed02000-0xfedfffff] [ 0.043315] PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.043318] PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xffffffff] [ 0.043325] [mem 0x80000000-0xfe041fff] available for PCI devices [ 0.043330] Booting paravirtualized kernel on bare hardware [ 0.043337] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.043368] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.044547] percpu: Embedded 86 pages/cpu s229376 r8192 d114688 u524288 [ 0.044580] pcpu-alloc: s229376 r8192 d114688 u524288 alloc=1*2097152 [ 0.044592] pcpu-alloc: [0] 0 1 2 3 [ 0.044691] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-6.8.0-44-generic root=UUID=HASH_0DE-4EF9-7EE1-9C9E-BFD2D235025E ro quiet splash [ 0.044964] Unknown kernel command line parameters "splash BOOT_IMAGE=/boot/vmlinuz-6.8.0-44-generic", will be passed to user space. [ 0.045017] random: crng init done [ 0.046457] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.047187] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.047407] Fallback order for Node 0: 0 [ 0.047430] Built 1 zonelists, mobility grouping on. Total pages: 989591 [ 0.047439] Policy zone: Normal [ 0.047465] mem auto-init: stack:all(zero), heap alloc:on, heap free:off [ 0.047484] software IO TLB: area num 4. [ 0.136197] Memory: 3563860K/4021836K available (22528K kernel code, 4442K rwdata, 14312K rodata, 4976K init, 4732K bss, 457716K reserved, 0K cma-reserved) [ 0.140508] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.140629] ftrace: allocating 57892 entries in 227 pages [ 0.164678] ftrace: allocated 227 pages with 5 groups [ 0.167450] Dynamic Preempt: voluntary [ 0.167755] rcu: Preemptible hierarchical RCU implementation. [ 0.167759] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4. [ 0.167766] Trampoline variant of Tasks RCU enabled. [ 0.167769] Rude variant of Tasks RCU enabled. [ 0.167770] Tracing variant of Tasks RCU enabled. [ 0.167773] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.167777] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.179755] NR_IRQS: 524544, nr_irqs: 1024, preallocated irqs: 16 [ 0.180313] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.180714] Console: colour dummy device 80x25 [ 0.180726] printk: legacy console [tty0] enabled [ 0.180939] ACPI: Core revision 20230628 [ 0.181521] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 99544814920 ns [ 0.181664] APIC: Switch to symmetric I/O mode setup [ 0.183036] x2apic: IRQ remapping doesn't support X2APIC mode [ 0.188001] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.192589] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0xfc66f4fc7c, max_idle_ns: 440795224246 ns [ 0.192613] Calibrating delay loop (skipped), value calculated using timer frequency.. 2188.80 BogoMIPS (lpj=1094400) [ 0.192713] CPU0: Thermal monitoring enabled (TM1) [ 0.192897] Last level iTLB entries: 4KB 48, 2MB 0, 4MB 0 [ 0.192905] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 [ 0.192918] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.192926] Spectre V2 : Mitigation: Retpolines [ 0.192930] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.192934] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.192937] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.192944] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.192951] Register File Data Sampling: Vulnerable: No microcode [ 0.192969] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.192974] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.192978] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers' [ 0.192982] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR' [ 0.192986] x86/fpu: xstate_offset[3]: 576, xstate_sizes[3]: 64 [ 0.192992] x86/fpu: xstate_offset[4]: 640, xstate_sizes[4]: 64 [ 0.192997] x86/fpu: Enabled xstate features 0x1b, context size is 704 bytes, using 'compacted' format. [ 0.266063] Freeing SMP alternatives memory: 48K [ 0.266086] pid_max: default: 32768 minimum: 301 [ 0.282842] LSM: initializing lsm=lockdown,capability,landlock,yama,apparmor,integrity [ 0.282931] landlock: Up and running. [ 0.282936] Yama: becoming mindful. [ 0.283732] AppArmor: AppArmor initialized [ 0.283905] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.283937] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.285081] smpboot: CPU0: Intel(R) Celeron(R) CPU N3350 @ 1.10GHz (family: 0x6, model: 0x5c, stepping: 0x9) [ 0.285602] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1. [ 0.285602] RCU Tasks Rude: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1. [ 0.285642] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1. [ 0.285731] Performance Events: PEBS fmt3+, Goldmont events, 32-deep LBR, full-width counters, Intel PMU driver. [ 0.285851] ... version: 4 [ 0.285855] ... bit width: 48 [ 0.285858] ... generic registers: 4 [ 0.285860] ... value mask: 0000ffffffffffff [ 0.285865] ... max period: 00007fffffffffff [ 0.285868] ... fixed-purpose events: 3 [ 0.285871] ... event mask: 000000070000000f [ 0.286174] signal: max sigframe size: 2032 [ 0.286234] Estimated ratio of average max frequency by base frequency (times 1024): 2234 [ 0.292232] rcu: Hierarchical SRCU implementation. [ 0.292249] rcu: Max phase no-delay instances is 400. [ 0.294140] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.294525] smp: Bringing up secondary CPUs ... [ 0.295161] smpboot: x86: Booting SMP configuration: [ 0.295170] .... node #0, CPUs: #1 [ 0.296908] smp: Brought up 1 node, 2 CPUs [ 0.296908] smpboot: Max logical packages: 2 [ 0.296908] smpboot: Total of 2 processors activated (4377.60 BogoMIPS) [ 0.298742] devtmpfs: initialized [ 0.298784] x86/mm: Memory block size: 128MB [ 0.301412] ACPI: PM: Registering ACPI NVS region [mem 0x798fc000-0x799bbfff] (786432 bytes) [ 0.301458] ACPI: PM: Registering ACPI NVS region [mem 0x7a1d9000-0x7a1d9fff] (4096 bytes) [ 0.301632] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.301671] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.301957] pinctrl core: initialized pinctrl subsystem [ 0.302333] PM: RTC time: 20:16:36, date: 2024-09-15 [ 0.304899] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.305593] DMA: preallocated 512 KiB GFP_KERNEL pool for atomic allocations [ 0.305979] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.306199] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.307017] thermal_sys: Registered thermal governor 'fair_share' [ 0.307028] thermal_sys: Registered thermal governor 'bang_bang' [ 0.307033] thermal_sys: Registered thermal governor 'step_wise' [ 0.307036] thermal_sys: Registered thermal governor 'user_space' [ 0.307039] thermal_sys: Registered thermal governor 'power_allocator' [ 0.307070] EISA bus registered [ 0.307119] cpuidle: using governor ladder [ 0.307138] cpuidle: using governor menu [ 0.307394] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.307755] PCI: ECAM [mem 0xe0000000-0xefffffff] (base 0xe0000000) for domain 0000 [bus 00-ff] [ 0.307812] PCI: Using configuration type 1 for base access [ 0.308286] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.345404] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages [ 0.345422] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page [ 0.345427] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages [ 0.345431] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page [ 0.347632] ACPI: Added _OSI(Module Device) [ 0.347645] ACPI: Added _OSI(Processor Device) [ 0.347649] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.347653] ACPI: Added _OSI(Processor Aggregator Device) [ 0.387038] ACPI: 10 ACPI AML tables successfully acquired and loaded [ 0.398277] ACPI: Dynamic OEM Table Load: [ 0.398318] ACPI: SSDT 0xFFFF9F59C0A9AA00 000102 (v02 PmRef Cpu0Cst 00003001 INTL 20120913) [ 0.402005] ACPI: Dynamic OEM Table Load: [ 0.402028] ACPI: SSDT 0xFFFF9F59C0A9B600 00015F (v02 PmRef ApIst 00003000 INTL 20120913) [ 0.404907] ACPI: Dynamic OEM Table Load: [ 0.404927] ACPI: SSDT 0xFFFF9F59C0EA99C0 00008D (v02 PmRef ApCst 00003000 INTL 20120913) [ 0.408974] ACPI: _OSC evaluated successfully for all CPUs [ 0.409281] ACPI: EC: EC started [ 0.409288] ACPI: EC: interrupt blocked [ 0.523322] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.523336] ACPI: \_SB_.PCI0.SBRG.H_EC: Boot DSDT EC used to handle transactions [ 0.523342] ACPI: Interpreter enabled [ 0.523431] ACPI: PM: (supports S0 S3 S4 S5) [ 0.523437] ACPI: Using IOAPIC for interrupt routing [ 0.527386] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.527393] PCI: Using E820 reservations for host bridge windows [ 0.529114] ACPI: Enabled 12 GPEs in block 00 to 7F [ 0.543675] ACPI: \_SB_.PCI0.SATA.PRT0.SPPR: New power resource [ 0.544292] ACPI: \_SB_.PCI0.SATA.PRT1.SPPR: New power resource [ 0.545485] ACPI: \_SB_.PCI0.XHC_.RHUB.HS02.UPPR: New power resource [ 0.546136] ACPI: \_SB_.PCI0.XHC_.RHUB.HS03.PX03: New power resource [ 0.547116] ACPI: \_SB_.PCI0.XHC_.RHUB.HS04.UPPR: New power resource [ 0.547587] ACPI: \_SB_.PCI0.XHC_.RHUB.HS05.UPPR: New power resource [ 0.549569] ACPI: \_SB_.PCI0.XHC_.RHUB.SSP2.UPPR: New power resource [ 0.550204] ACPI: \_SB_.PCI0.XHC_.RHUB.SSP4.UPPR: New power resource [ 0.550717] ACPI: \_SB_.PCI0.XHC_.RHUB.SSP5.UPPR: New power resource [ 0.551479] ACPI: \_SB_.USBC: New power resource [ 0.551878] ACPI: \_SB_.PCI0.LSPR: New power resource [ 0.566220] ACPI: \_SB_.SDPR: New power resource [ 0.581548] ACPI: \_SB_.PCI0.PAUD: New power resource [ 0.592432] ACPI: \_TZ_.FN00: New power resource [ 0.595111] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.595146] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3] [ 0.597899] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR DPC] [ 0.601403] PCI host bridge to bus 0000:00 [ 0.601420] pci_bus 0000:00: root bus resource [io 0x0070-0x0077] [ 0.601430] pci_bus 0000:00: root bus resource [io 0x0000-0x006f window] [ 0.601436] pci_bus 0000:00: root bus resource [io 0x0078-0x0cf7 window] [ 0.601441] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.601447] pci_bus 0000:00: root bus resource [mem 0x7c000001-0x7fffffff window] [ 0.601453] pci_bus 0000:00: root bus resource [mem 0x7b800001-0x7bffffff window] [ 0.601459] pci_bus 0000:00: root bus resource [mem 0x80000000-0xcfffffff window] [ 0.601464] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xefffffff window] [ 0.601471] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.601551] pci 0000:00:00.0: [8086:5af0] type 00 class 0x060000 conventional PCI endpoint [ 0.601989] pci 0000:00:00.1: [8086:5a8c] type 00 class 0x118000 conventional PCI endpoint [ 0.602037] pci 0000:00:00.1: BAR 0 [mem 0xa1210000-0xa1217fff 64bit] [ 0.602428] pci 0000:00:02.0: [8086:5a85] type 00 class 0x030000 PCIe Root Complex Integrated Endpoint [ 0.602458] pci 0000:00:02.0: BAR 0 [mem 0xa0000000-0xa0ffffff 64bit] [ 0.602475] pci 0000:00:02.0: BAR 2 [mem 0x90000000-0x9fffffff 64bit pref] [ 0.602489] pci 0000:00:02.0: BAR 4 [io 0xf000-0xf03f] [ 0.602539] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.603342] pci 0000:00:0e.0: [8086:5a98] type 00 class 0x040380 PCIe Root Complex Integrated Endpoint [ 0.603380] pci 0000:00:0e.0: BAR 0 [mem 0xa1218000-0xa121bfff 64bit] [ 0.603415] pci 0000:00:0e.0: BAR 4 [mem 0xa1000000-0xa10fffff 64bit] [ 0.603513] pci 0000:00:0e.0: PME# supported from D0 D3hot D3cold [ 0.604848] pci 0000:00:0f.0: [8086:5a9a] type 00 class 0x078000 conventional PCI endpoint [ 0.604897] pci 0000:00:0f.0: BAR 0 [mem 0xa1247000-0xa1247fff 64bit] [ 0.605062] pci 0000:00:0f.0: PME# supported from D3hot [ 0.605341] pci 0000:00:12.0: [8086:5ae3] type 00 class 0x010601 conventional PCI endpoint [ 0.605370] pci 0000:00:12.0: BAR 0 [mem 0xa121c000-0xa121dfff] [ 0.605385] pci 0000:00:12.0: BAR 1 [mem 0xa1244000-0xa12440ff] [ 0.605399] pci 0000:00:12.0: BAR 2 [io 0xf090-0xf097] [ 0.605413] pci 0000:00:12.0: BAR 3 [io 0xf080-0xf083] [ 0.605426] pci 0000:00:12.0: BAR 4 [io 0xf060-0xf07f] [ 0.605441] pci 0000:00:12.0: BAR 5 [mem 0xa1243000-0xa12437ff] [ 0.605511] pci 0000:00:12.0: PME# supported from D3hot [ 0.606210] pci 0000:00:14.0: [8086:5ad7] type 01 class 0x060400 PCIe Root Port [ 0.606271] pci 0000:00:14.0: PCI bridge to [bus 01] [ 0.606301] pci 0000:00:14.0: bridge window [mem 0xa1100000-0xa11fffff] [ 0.606479] pci 0000:00:14.0: PME# supported from D0 D3hot D3cold [ 0.606883] pci 0000:00:15.0: [8086:5aa8] type 00 class 0x0c0330 conventional PCI endpoint [ 0.606918] pci 0000:00:15.0: BAR 0 [mem 0xa1200000-0xa120ffff 64bit] [ 0.607025] pci 0000:00:15.0: PME# supported from D3hot D3cold [ 0.607455] pci 0000:00:16.0: [8086:5aac] type 00 class 0x118000 conventional PCI endpoint [ 0.607492] pci 0000:00:16.0: BAR 0 [mem 0xa1242000-0xa1242fff 64bit] [ 0.607515] pci 0000:00:16.0: BAR 2 [mem 0xa1241000-0xa1241fff 64bit] [ 0.607834] pci 0000:00:16.1: [8086:5aae] type 00 class 0x118000 conventional PCI endpoint [ 0.607871] pci 0000:00:16.1: BAR 0 [mem 0xa1240000-0xa1240fff 64bit] [ 0.607895] pci 0000:00:16.1: BAR 2 [mem 0xa123f000-0xa123ffff 64bit] [ 0.608220] pci 0000:00:16.2: [8086:5ab0] type 00 class 0x118000 conventional PCI endpoint [ 0.608259] pci 0000:00:16.2: BAR 0 [mem 0xa123e000-0xa123efff 64bit] [ 0.608282] pci 0000:00:16.2: BAR 2 [mem 0xa123d000-0xa123dfff 64bit] [ 0.608594] pci 0000:00:16.3: [8086:5ab2] type 00 class 0x118000 conventional PCI endpoint [ 0.608631] pci 0000:00:16.3: BAR 0 [mem 0xa123c000-0xa123cfff 64bit] [ 0.608653] pci 0000:00:16.3: BAR 2 [mem 0xa123b000-0xa123bfff 64bit] [ 0.608986] pci 0000:00:17.0: [8086:5ab4] type 00 class 0x118000 conventional PCI endpoint [ 0.609022] pci 0000:00:17.0: BAR 0 [mem 0xa123a000-0xa123afff 64bit] [ 0.609043] pci 0000:00:17.0: BAR 2 [mem 0xa1239000-0xa1239fff 64bit] [ 0.609380] pci 0000:00:17.1: [8086:5ab6] type 00 class 0x118000 conventional PCI endpoint [ 0.609419] pci 0000:00:17.1: BAR 0 [mem 0xa1238000-0xa1238fff 64bit] [ 0.609439] pci 0000:00:17.1: BAR 2 [mem 0xa1237000-0xa1237fff 64bit] [ 0.609757] pci 0000:00:17.2: [8086:5ab8] type 00 class 0x118000 conventional PCI endpoint [ 0.609792] pci 0000:00:17.2: BAR 0 [mem 0xa1236000-0xa1236fff 64bit] [ 0.609817] pci 0000:00:17.2: BAR 2 [mem 0xa1235000-0xa1235fff 64bit] [ 0.610126] pci 0000:00:17.3: [8086:5aba] type 00 class 0x118000 conventional PCI endpoint [ 0.610161] pci 0000:00:17.3: BAR 0 [mem 0xa1234000-0xa1234fff 64bit] [ 0.610182] pci 0000:00:17.3: BAR 2 [mem 0xa1233000-0xa1233fff 64bit] [ 0.610529] pci 0000:00:18.0: [8086:5abc] type 00 class 0x118000 conventional PCI endpoint [ 0.610564] pci 0000:00:18.0: BAR 0 [mem 0xa1232000-0xa1232fff 64bit] [ 0.610585] pci 0000:00:18.0: BAR 2 [mem 0xa1231000-0xa1231fff 64bit] [ 0.610908] pci 0000:00:18.1: [8086:5abe] type 00 class 0x118000 conventional PCI endpoint [ 0.610945] pci 0000:00:18.1: BAR 0 [mem 0xa1230000-0xa1230fff 64bit] [ 0.610966] pci 0000:00:18.1: BAR 2 [mem 0xa122f000-0xa122ffff 64bit] [ 0.611280] pci 0000:00:18.2: [8086:5ac0] type 00 class 0x118000 conventional PCI endpoint [ 0.611316] pci 0000:00:18.2: BAR 0 [mem 0xa122e000-0xa122efff 64bit] [ 0.611340] pci 0000:00:18.2: BAR 2 [mem 0xa122d000-0xa122dfff 64bit] [ 0.611656] pci 0000:00:18.3: [8086:5aee] type 00 class 0x118000 conventional PCI endpoint [ 0.611693] pci 0000:00:18.3: BAR 0 [mem 0xa122c000-0xa122cfff 64bit] [ 0.611717] pci 0000:00:18.3: BAR 2 [mem 0xa122b000-0xa122bfff 64bit] [ 0.612054] pci 0000:00:19.0: [8086:5ac2] type 00 class 0x118000 conventional PCI endpoint [ 0.612088] pci 0000:00:19.0: BAR 0 [mem 0xa122a000-0xa122afff 64bit] [ 0.612111] pci 0000:00:19.0: BAR 2 [mem 0xa1229000-0xa1229fff 64bit] [ 0.612433] pci 0000:00:19.1: [8086:5ac4] type 00 class 0x118000 conventional PCI endpoint [ 0.612470] pci 0000:00:19.1: BAR 0 [mem 0xa1228000-0xa1228fff 64bit] [ 0.612493] pci 0000:00:19.1: BAR 2 [mem 0xa1227000-0xa1227fff 64bit] [ 0.612802] pci 0000:00:19.2: [8086:5ac6] type 00 class 0x118000 conventional PCI endpoint [ 0.612838] pci 0000:00:19.2: BAR 0 [mem 0xa1226000-0xa1226fff 64bit] [ 0.612861] pci 0000:00:19.2: BAR 2 [mem 0xa1225000-0xa1225fff 64bit] [ 0.613195] pci 0000:00:1b.0: [8086:5aca] type 00 class 0x080501 conventional PCI endpoint [ 0.613230] pci 0000:00:1b.0: BAR 0 [mem 0xa1224000-0xa1224fff 64bit] [ 0.613249] pci 0000:00:1b.0: BAR 2 [mem 0xa1223000-0xa1223fff 64bit] [ 0.614001] pci 0000:00:1c.0: [8086:5acc] type 00 class 0x080501 conventional PCI endpoint [ 0.614038] pci 0000:00:1c.0: BAR 0 [mem 0xa1222000-0xa1222fff 64bit] [ 0.614058] pci 0000:00:1c.0: BAR 2 [mem 0xa1221000-0xa1221fff 64bit] [ 0.614747] pci 0000:00:1e.0: [8086:5ad0] type 00 class 0x080501 conventional PCI endpoint [ 0.614779] pci 0000:00:1e.0: BAR 0 [mem 0xa1220000-0xa1220fff 64bit] [ 0.614799] pci 0000:00:1e.0: BAR 2 [mem 0xa121f000-0xa121ffff 64bit] [ 0.615111] pci 0000:00:1f.0: [8086:5ae8] type 00 class 0x060100 conventional PCI endpoint [ 0.615563] pci 0000:00:1f.1: [8086:5ad4] type 00 class 0x0c0500 conventional PCI endpoint [ 0.615635] pci 0000:00:1f.1: BAR 0 [mem 0xa121e000-0xa121e0ff 64bit] [ 0.615723] pci 0000:00:1f.1: BAR 4 [io 0xf040-0xf05f] [ 0.616781] pci 0000:01:00.0: [8086:3165] type 00 class 0x028000 PCIe Endpoint [ 0.617184] pci 0000:01:00.0: BAR 0 [mem 0xa1100000-0xa1101fff 64bit] [ 0.617524] pci 0000:01:00.0: Upstream bridge's Max Payload Size set to 128 (was 256, max 256) [ 0.617767] pci 0000:01:00.0: Max Payload Size set to 128 (was 128, max 128) [ 0.618495] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [ 0.620522] pci 0000:00:14.0: PCI bridge to [bus 01] [ 0.628085] ACPI: PCI: Interrupt link LNKA configured for IRQ 15 [ 0.628109] ACPI: PCI: Interrupt link LNKA disabled [ 0.628353] ACPI: PCI: Interrupt link LNKB configured for IRQ 15 [ 0.628361] ACPI: PCI: Interrupt link LNKB disabled [ 0.628601] ACPI: PCI: Interrupt link LNKC configured for IRQ 15 [ 0.628609] ACPI: PCI: Interrupt link LNKC disabled [ 0.628852] ACPI: PCI: Interrupt link LNKD configured for IRQ 15 [ 0.628859] ACPI: PCI: Interrupt link LNKD disabled [ 0.629100] ACPI: PCI: Interrupt link LNKE configured for IRQ 15 [ 0.629107] ACPI: PCI: Interrupt link LNKE disabled [ 0.629346] ACPI: PCI: Interrupt link LNKF configured for IRQ 15 [ 0.629354] ACPI: PCI: Interrupt link LNKF disabled [ 0.629593] ACPI: PCI: Interrupt link LNKG configured for IRQ 15 [ 0.629600] ACPI: PCI: Interrupt link LNKG disabled [ 0.629875] ACPI: PCI: Interrupt link LNKH configured for IRQ 15 [ 0.629883] ACPI: PCI: Interrupt link LNKH disabled [ 0.649965] ACPI Warning: GPE type mismatch (level/edge) (20230628/evxface-791) [ 0.650059] ACPI: EC: interrupt unblocked [ 0.650063] ACPI: EC: event unblocked [ 0.650075] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.650079] ACPI: EC: GPE=0x2c [ 0.650086] ACPI: \_SB_.PCI0.SBRG.H_EC: Boot DSDT EC initialization complete [ 0.650094] ACPI: \_SB_.PCI0.SBRG.H_EC: EC: Used to handle transactions and events [ 0.650948] iommu: Default domain type: Translated [ 0.650962] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.651633] SCSI subsystem initialized [ 0.651773] libata version 3.00 loaded. [ 0.651773] ACPI: bus type USB registered [ 0.651798] usbcore: registered new interface driver usbfs [ 0.651823] usbcore: registered new interface driver hub [ 0.651854] usbcore: registered new device driver usb [ 0.651955] pps_core: LinuxPPS API ver. 1 registered [ 0.651961] pps_core: Software ver. 5.3.6 - Copyright 0FB6-08D5 Rodolfo Giometti <XXX@XXX> [ 0.651973] PTP clock support registered [ 0.652715] EDAC MC: Ver: 3.0.0 [ 0.653805] efivars: Registered efivars operations [ 0.654465] NetLabel: Initializing [ 0.654475] NetLabel: domain hash size = 128 [ 0.654479] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.654558] NetLabel: unlabeled traffic allowed by default [ 0.654768] mctp: management component transport protocol core [ 0.654775] NET: Registered PF_MCTP protocol family [ 0.654789] PCI: Using ACPI for IRQ routing [ 0.683687] PCI: pci_cache_line_size set to 64 bytes [ 0.684228] e820: reserve RAM buffer [mem 0x0003f000-0x0003ffff] [ 0.684236] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff] [ 0.684240] e820: reserve RAM buffer [mem 0x6503d018-0x67ffffff] [ 0.684245] e820: reserve RAM buffer [mem 0x71646000-0x73ffffff] [ 0.684249] e820: reserve RAM buffer [mem 0x757df000-0x77ffffff] [ 0.684253] e820: reserve RAM buffer [mem 0x767c3000-0x77ffffff] [ 0.684257] e820: reserve RAM buffer [mem 0x7a1d9000-0x7bffffff] [ 0.684262] e820: reserve RAM buffer [mem 0x7a764000-0x7bffffff] [ 0.684266] e820: reserve RAM buffer [mem 0x7b000000-0x7bffffff] [ 0.684507] pci 0000:00:02.0: vgaarb: setting as boot VGA device [ 0.684518] pci 0000:00:02.0: vgaarb: bridge control possible [ 0.684523] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.684542] vgaarb: loaded [ 0.684791] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.684820] hpet0: 8 comparators, 64-bit 19.200000 MHz counter [ 0.687604] clocksource: Switched to clocksource tsc-early [ 0.687604] VFS: Disk quotas dquot_6.6.0 [ 0.687604] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.690529] AppArmor: AppArmor Filesystem Enabled [ 0.690767] pnp: PnP ACPI init [ 0.691973] system 00:00: [io 0x0680-0x069f] has been reserved [ 0.691993] system 00:00: [io 0x0400-0x047f] could not be reserved [ 0.691999] system 00:00: [io 0x0500-0x05fe] has been reserved [ 0.692005] system 00:00: [io 0x0600-0x061f] has been reserved [ 0.692011] system 00:00: [io 0x164e-0x164f] has been reserved [ 0.699636] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved [ 0.699664] system 00:01: [mem 0xfea00000-0xfeafffff] has been reserved [ 0.699671] system 00:01: [mem 0xfed01000-0xfed01fff] has been reserved [ 0.699678] system 00:01: [mem 0xfed03000-0xfed03fff] has been reserved [ 0.699684] system 00:01: [mem 0xfed06000-0xfed06fff] has been reserved [ 0.699690] system 00:01: [mem 0xfed08000-0xfed09fff] has been reserved [ 0.699696] system 00:01: [mem 0xfed80000-0xfedbffff] has been reserved [ 0.699703] system 00:01: [mem 0xfed1c000-0xfed1cfff] has been reserved [ 0.699710] system 00:01: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.701901] pnp: PnP ACPI: found 4 devices [ 0.714507] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.714765] NET: Registered PF_INET protocol family [ 0.715052] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.770664] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear) [ 0.770814] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.770970] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.771577] TCP bind hash table entries: 32768 (order: 8, 1048576 bytes, linear) [ 0.772307] TCP: Hash tables configured (established 32768 bind 32768) [ 0.772694] MPTCP token hash table entries: 4096 (order: 4, 98304 bytes, linear) [ 0.772793] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear) [ 0.772890] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear) [ 0.773130] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.773210] NET: Registered PF_XDP protocol family [ 0.773282] pci 0000:00:14.0: PCI bridge to [bus 01] [ 0.773315] pci 0000:00:14.0: bridge window [mem 0xa1100000-0xa11fffff] [ 0.773351] pci_bus 0000:00: resource 4 [io 0x0070-0x0077] [ 0.773358] pci_bus 0000:00: resource 5 [io 0x0000-0x006f window] [ 0.773364] pci_bus 0000:00: resource 6 [io 0x0078-0x0cf7 window] [ 0.773369] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window] [ 0.773375] pci_bus 0000:00: resource 8 [mem 0x7c000001-0x7fffffff window] [ 0.773380] pci_bus 0000:00: resource 9 [mem 0x7b800001-0x7bffffff window] [ 0.773386] pci_bus 0000:00: resource 10 [mem 0x80000000-0xcfffffff window] [ 0.773392] pci_bus 0000:00: resource 11 [mem 0xe0000000-0xefffffff window] [ 0.773399] pci_bus 0000:01: resource 1 [mem 0xa1100000-0xa11fffff] [ 0.774905] PCI: CLS 64 bytes, default 64 [ 0.775030] pci 0000:00:0d.0: [8086:5a92] type 00 class 0x058000 conventional PCI endpoint [ 0.775102] pci 0000:00:0d.0: BAR 0 [mem 0xd0000000-0xd0ffffff 64bit] [ 0.775905] pci 0000:00:0d.2: [8086:5a96] type 00 class 0x0c8000 conventional PCI endpoint [ 0.775946] pci 0000:00:0d.2: BAR 0 [mem 0xfed01000-0xfed01fff] [ 0.776514] Trying to unpack rootfs image as initramfs... [ 0.777226] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.777242] software IO TLB: mapped [mem 0x000000006103d000-0x000000006503d000] (64MB) [ 0.777641] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0xfc66f4fc7c, max_idle_ns: 440795224246 ns [ 0.777717] clocksource: Switched to clocksource tsc [ 0.779360] Initialise system trusted keyrings [ 0.779405] Key type blacklist registered [ 0.779636] workingset: timestamp_bits=36 max_order=20 bucket_order=0 [ 0.779694] zbud: loaded [ 0.780615] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.781031] fuse: init (API version 7.39) [ 0.781505] integrity: Platform Keyring initialized [ 0.781531] integrity: Machine keyring initialized [ 0.831601] Key type asymmetric registered [ 0.831608] Asymmetric key parser 'x509' registered [ 0.831675] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243) [ 0.831898] io scheduler mq-deadline registered [ 0.833671] pcieport 0000:00:14.0: PME: Signaling with IRQ 120 [ 0.834014] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 0.837233] ACPI: AC: AC Adapter [ADP1] (off-line) [ 0.837510] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:13/PNP0C09:00/PNP0C0D:00/input/input0 [ 0.837781] ACPI: button: Lid Switch [LID0] [ 0.838014] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1 [ 0.838092] ACPI: button: Power Button [PWRB] [ 0.843463] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.843484] ACPI: thermal: Thermal Zone [TZ01] (42 C) [ 0.844698] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.866737] Linux agpgart interface v0.103 [ 0.902046] loop: module loaded [ 0.903945] ACPI: bus type drm_connector registered [ 0.906425] tun: Universal TUN/TAP device driver, 1.6 [ 0.906629] PPP generic driver version 2.4.2 [ 0.910677] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 0.910690] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 0.916514] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.916962] mousedev: PS/2 mouse device common for all mice [ 0.918500] rtc_cmos 00:03: RTC can wake from S4 [ 0.920945] rtc_cmos 00:03: registered as rtc0 [ 0.921104] rtc_cmos 00:03: setting system clock to 2024-09-15T20:16:37 UTC (1726431397) [ 0.921220] rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram [ 0.921258] i2c_dev: i2c /dev entries driver [ 0.922906] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. [ 0.924380] device-mapper: uevent: version 1.0.3 [ 0.924679] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: XXX@XXX [ 0.924822] platform eisa.0: Probing EISA bus 0 [ 0.924834] platform eisa.0: EISA: Cannot allocate resource for mainboard [ 0.924840] platform eisa.0: Cannot allocate resource for EISA slot 1 [ 0.924845] platform eisa.0: Cannot allocate resource for EISA slot 2 [ 0.924850] platform eisa.0: Cannot allocate resource for EISA slot 3 [ 0.924855] platform eisa.0: Cannot allocate resource for EISA slot 4 [ 0.924860] platform eisa.0: Cannot allocate resource for EISA slot 5 [ 0.924865] platform eisa.0: Cannot allocate resource for EISA slot 6 [ 0.924869] platform eisa.0: Cannot allocate resource for EISA slot 7 [ 0.924874] platform eisa.0: Cannot allocate resource for EISA slot 8 [ 0.924878] platform eisa.0: EISA: Detected 0 cards [ 0.924911] intel_pstate: Intel P-state driver initializing [ 0.925431] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2 [ 0.925732] ledtrig-cpu: registered to indicate activity on CPUs [ 0.926310] [drm] Initialized simpledrm 1.0.0 20200625 for simple-framebuffer.0 on minor 0 [ 0.944901] fbcon: Deferring console take-over [ 0.944919] simple-framebuffer simple-framebuffer.0: [drm] fb0: simpledrmdrmfb frame buffer device [ 0.945259] drop_monitor: Initializing network drop monitor service [ 0.945478] NET: Registered PF_INET6 protocol family [ 0.954934] ACPI: battery: Slot [BAT0] (battery present) [ 1.171390] Freeing initrd memory: 69984K [ 1.189206] Segment Routing with IPv6 [ 1.189289] In-situ OAM (IOAM) with IPv6 [ 1.189356] NET: Registered PF_PACKET protocol family [ 1.189847] Key type dns_resolver registered [ 1.190745] microcode: Current revision: 0x00000048 [ 1.190756] microcode: Updated early from: 0x00000038 [ 1.191090] resctrl: L2 allocation detected [ 1.191125] IPI shorthand broadcast: enabled [ 1.194317] sched_clock: Marking stable (1189003106, 5145068)->(1200484137, -6335963) [ 1.194800] registered taskstats version 1 [ 1.195285] Loading compiled-in X.509 certificates [ 1.197130] Loaded X.509 cert 'Build time autogenerated kernel key: 97dd145b712bf7528a22b3519fb0299262ced286' [ 1.198335] Loaded X.509 cert 'Canonical Ltd. Live Patch Signing: 14df34d1a87cf37625abec039ef2bf521249b969' [ 1.199955] Loaded X.509 cert 'Canonical Ltd. Kernel Module Signing: 88f752e560a1e0737e31163a466ad7b70a850c19' [ 1.199961] blacklist: Loading compiled-in revocation X.509 certificates [ 1.200002] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing: 61482aa2830d0ab2ad5af10b7250da9033ddcef0' [ 1.200049] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2017): 242ade75ac4a15e50d50c84b0d45ff3eae707a03' [ 1.200079] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (ESM 2018): 365188c1d374d6b07c3c8f240f8ef722433d6a8b' [ 1.200110] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2019): c0746fd6c5da3ae827864651ad66ae47fe24b3e8' [ 1.200140] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2021 v1): a8d54bbb3825cfb94fa13c9f8a594a195c107b8d' [ 1.200210] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2021 v2): 4cf046892d6fd3c9a5b03f98d845f90851dc6a8c' [ 1.200242] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2021 v3): 100437bb6de6e469b581e61cd66bce3ef4ed53af' [ 1.200273] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (Ubuntu Core 2019): c1d57b8f6b743f23ee41f4f7ee292f06eecadfb9' [ 1.207686] Key type .fscrypt registered [ 1.207717] Key type fscrypt-provisioning registered [ 1.207845] Key type trusted registered [ 1.251294] Key type encrypted registered [ 1.251332] AppArmor: AppArmor sha256 policy hashing enabled [ 1.251583] integrity: Loading X.509 certificate: UEFI:db [ 1.251678] integrity: Loaded X.509 cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4' [ 1.251681] integrity: Loading X.509 certificate: UEFI:db [ 1.251714] integrity: Loaded X.509 cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53' [ 1.253856] Loading compiled-in module X.509 certificates [ 1.255039] Loaded X.509 cert 'Build time autogenerated kernel key: 97dd145b712bf7528a22b3519fb0299262ced286' [ 1.255045] ima: Allocated hash algorithm: sha256 [ 1.287902] ima: No architecture policies found [ 1.287973] evm: Initialising EVM extended attributes: [ 1.287975] evm: security.selinux [ 1.287979] evm: security.SMACK64 [ 1.287980] evm: security.SMACK64EXEC [ 1.287981] evm: security.SMACK64TRANSMUTE [ 1.287983] evm: security.SMACK64MMAP [ 1.287984] evm: security.apparmor [ 1.287985] evm: security.ima [ 1.287987] evm: security.capability [ 1.287988] evm: HMAC attrs: 0x1 [ 1.288691] PM: Magic number: 8:986:295 [ 1.288778] tty tty28: hash matches [ 1.297441] RAS: Correctable Errors collector initialized. [ 1.297681] clk: Disabling unused clocks [ 1.300912] Freeing unused decrypted memory: 2028K [ 1.303199] Freeing unused kernel image (initmem) memory: 4976K [ 1.303221] Write protecting the kernel read-only data: 36864k [ 1.303720] Freeing unused kernel image (rodata/data gap) memory: 24K [ 1.365955] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.365972] Run /init as init process [ 1.365975] with arguments: [ 1.365978] /init [ 1.365980] splash [ 1.365982] with environment: [ 1.365984] HOME=/ [ 1.365985] TERM=linux [ 1.365987] BOOT_IMAGE=/boot/vmlinuz-6.8.0-44-generic [ 1.692209] hid: raw HID events driver (C) Jiri Kosina [ 1.712996] xhci_hcd 0000:00:15.0: xHCI Host Controller [ 1.713030] xhci_hcd 0000:00:15.0: new USB bus registered, assigned bus number 1 [ 1.714191] xhci_hcd 0000:00:15.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000081109810 [ 1.714717] xhci_hcd 0000:00:15.0: xHCI Host Controller [ 1.714725] xhci_hcd 0000:00:15.0: new USB bus registered, assigned bus number 2 [ 1.714732] xhci_hcd 0000:00:15.0: Host supports USB 3.0 SuperSpeed [ 1.715282] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.08 [ 1.715290] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.715293] usb usb1: Product: xHCI Host Controller [ 1.715296] usb usb1: Manufacturer: Linux 6.8.0-44-generic xhci-hcd [ 1.715298] usb usb1: SerialNumber: ... [ 1.716169] ahci 0000:00:12.0: version 3.0 [ 1.716467] hub 1-0:1.0: USB hub found [ 1.716512] hub 1-0:1.0: 8 ports detected [ 1.717441] sdhci: Secure Digital Host Controller Interface driver [ 1.717448] sdhci: Copyright(c) Pierre Ossman [ 1.720283] idma64 idma64.0: Found Intel integrated DMA 64-bit [ 1.721045] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.08 [ 1.721062] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.721065] usb usb2: Product: xHCI Host Controller [ 1.721067] usb usb2: Manufacturer: Linux 6.8.0-44-generic xhci-hcd [ 1.721070] usb usb2: SerialNumber: ... [ 1.721424] hub 2-0:1.0: USB hub found [ 1.721450] hub 2-0:1.0: 7 ports detected [ 1.726809] ahci 0000:00:12.0: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl SATA mode [ 1.726834] ahci 0000:00:12.0: flags: 64bit ncq sntf pm clo only pmp pio slum part deso sadm sds apst [ 1.729304] scsi host0: ahci [ 1.729504] ata1: SATA max UDMA/133 abar m2048@0xa1243000 port 0xa1243100 irq 122 lpm-pol 3 [ 1.733349] sdhci-pci 0000:00:1b.0: SDHCI controller found [8086:5aca] (rev b) [ 1.733388] sdhci-pci 0000:00:1b.0: enabling device (0000 -> 0002) [ 1.734521] sdhci-pci 0000:00:1c.0: SDHCI controller found [8086:5acc] (rev b) [ 1.734880] sdhci-pci 0000:00:1e.0: SDHCI controller found [8086:5ad0] (rev b) [ 1.734894] sdhci-pci 0000:00:1e.0: enabling device (0000 -> 0002) [ 1.738083] mmc1: SDHCI controller on PCI [0000:00:1c.0] using ADMA 64-bit [ 1.738086] mmc0: SDHCI controller on PCI [0000:00:1b.0] using ADMA 64-bit [ 1.738517] mmc2: SDHCI controller on PCI [0000:00:1e.0] using ADMA 64-bit [ 1.747987] idma64 idma64.1: Found Intel integrated DMA 64-bit [ 1.764400] idma64 idma64.2: Found Intel integrated DMA 64-bit [ 1.778520] idma64 idma64.3: Found Intel integrated DMA 64-bit [ 1.792465] idma64 idma64.4: Found Intel integrated DMA 64-bit [ 1.807816] idma64 idma64.5: Found Intel integrated DMA 64-bit [ 1.829536] idma64 idma64.6: Found Intel integrated DMA 64-bit [ 1.844922] idma64 idma64.7: Found Intel integrated DMA 64-bit [ 1.859255] idma64 idma64.8: Found Intel integrated DMA 64-bit [ 1.860263] idma64 idma64.9: Found Intel integrated DMA 64-bit [ 1.863015] idma64 idma64.12: Found Intel integrated DMA 64-bit [ 1.864467] idma64 idma64.13: Found Intel integrated DMA 64-bit [ 1.865816] idma64 idma64.14: Found Intel integrated DMA 64-bit [ 1.926465] mmc2: Failed to initialize a non-removable card [ 1.930082] mmc1: Failed to initialize a non-removable card [ 1.964183] usb 1-3: new full-speed USB device number 2 using xhci_hcd [ 2.093997] usb 1-3: New USB device found, idVendor=1ea7, idProduct=0064, bcdDevice= 2.00 [ 2.094032] usb 1-3: New USB device strings: Mfr=0, Product=1, SerialNumber=... [ 2.094035] usb 1-3: Product: 2.4G Mouse [ 2.201534] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 2.201824] ata1.00: ATA-10: HS-SSD-G100N 128G, V3.33.S, max UDMA/133 [ 2.202079] ata1.00: NCQ Send/Recv Log not supported [ 2.202107] ata1.00: 250069680 sectors, multi 0: LBA48 NCQ (depth 32), AA [ 2.203434] ata1.00: Features: Dev-Sleep [ 2.203915] ata1.00: NCQ Send/Recv Log not supported [ 2.204839] ata1.00: configured for UDMA/133 [ 2.204885] ahci 0000:00:12.0: port does not support device sleep [ 2.206136] scsi 0:0:0:0: Direct-Access ATA HS-SSD-G100N 128 3.S PQ: 0 ANSI: 5 [ 2.207457] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.208101] sd 0:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB) [ 2.208130] sd 0:0:0:0: [sda] Write Protect is off [ 2.208135] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.208205] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.208254] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 2.211244] usb 1-4: new high-speed USB device number 3 using xhci_hcd [ 2.211980] sda: sda1 sda2 [ 2.212689] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.325657] dw-apb-uart.8: ttyS4 at MMIO 0xa1232000 (irq = 4, base_baud = 115200) is a 16550A [ 2.333756] input: SYNA3602:00 0911:5288 Mouse as /devices/pci0000:00/0000:00:17.0/i2c_designware.4/i2c-4/i2c-SYNA3602:00/0018:0911:5288.0001/input/input3 [ 2.334218] input: SYNA3602:00 0911:5288 Touchpad as /devices/pci0000:00/0000:00:17.0/i2c_designware.4/i2c-4/i2c-SYNA3602:00/0018:0911:5288.0001/input/input4 [ 2.334590] hid-generic 0018:0911:5288.0001: input,hidraw0: I2C HID v1.00 Mouse [SYNA3602:00 0911:5288] on i2c-SYNA3602:00 [ 2.338129] usb 1-4: New USB device found, idVendor=0bda, idProduct=0129, bcdDevice=39.60 [ 2.338180] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 2.338183] usb 1-4: Product: USB2.0-CRW [ 2.338186] usb 1-4: Manufacturer: Generic [ 2.338189] usb 1-4: SerialNumber: ... [ 2.345518] dw-apb-uart.9: ttyS5 at MMIO 0xa1230000 (irq = 5, base_baud = 115200) is a 16550A [ 2.368767] input: SYNA3602:00 0911:5288 Mouse as /devices/pci0000:00/0000:00:17.0/i2c_designware.4/i2c-4/i2c-SYNA3602:00/0018:0911:5288.0001/input/input5 [ 2.371622] input: SYNA3602:00 0911:5288 Touchpad as /devices/pci0000:00/0000:00:17.0/i2c_designware.4/i2c-4/i2c-SYNA3602:00/0018:0911:5288.0001/input/input6 [ 2.371801] hid-multitouch 0018:0911:5288.0001: input,hidraw0: I2C HID v1.00 Mouse [SYNA3602:00 0911:5288] on i2c-SYNA3602:00 [ 2.384860] dw-apb-uart.10: ttyS6 at MMIO 0xa122e000 (irq = 6, base_baud = 115200) is a 16550A [ 2.431258] dw-apb-uart.11: ttyS7 at MMIO 0xa122c000 (irq = 7, base_baud = 115200) is a 16550A [ 2.456205] usb 1-7: new full-speed USB device number 4 using xhci_hcd [ 2.587034] usb 1-7: New USB device found, idVendor=8087, idProduct=0a2a, bcdDevice= 0.01 [ 2.587053] usb 1-7: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 2.705526] usb 1-8: new high-speed USB device number 5 using xhci_hcd [ 2.875484] usb 1-8: New USB device found, idVendor=058f, idProduct=3822, bcdDevice= 6.02 [ 2.875516] usb 1-8: New USB device strings: Mfr=0, Product=2, SerialNumber=... [ 2.875525] usb 1-8: Product: USB 2.0 Camera [ 2.909340] usbcore: registered new interface driver rtsx_usb [ 2.915579] input: 2.4G Mouse as /devices/pci0000:00/0000:00:15.0/usb1/1-3/1-3:1.0/0003:1EA7:0064.0002/input/input7 [ 2.916264] input: 2.4G Mouse as /devices/pci0000:00/0000:00:15.0/usb1/1-3/1-3:1.0/0003:1EA7:0064.0002/input/input8 [ 2.916922] hid-generic 0003:1EA7:0064.0002: input,hiddev0,hidraw1: USB HID v1.10 Mouse [2.4G Mouse] on usb-0000:00:15.0-3/input0 [ 2.917190] usbcore: registered new interface driver usbhid [ 2.917196] usbhid: USB HID core driver [ 3.115213] raid6: sse2x4 gen() 6509 MB/s [ 3.132213] raid6: sse2x2 gen() 6685 MB/s [ 3.149235] raid6: sse2x1 gen() 6240 MB/s [ 3.149238] raid6: using algorithm sse2x2 gen() 6685 MB/s [ 3.166222] raid6: .... xor() 4626 MB/s, rmw enabled [ 3.166224] raid6: using ssse3x2 recovery algorithm [ 3.169006] xor: measuring software checksum speed [ 3.169865] prefetch64-sse : 12555 MB/sec [ 3.170832] generic_sse : 10847 MB/sec [ 3.170835] xor: using function: prefetch64-sse (12555 MB/sec) [ 3.173428] async_tx: api initialized (async) [ 3.518319] Btrfs loaded, zoned=yes, fsverity=yes [ 3.640376] EXT4-fs (sda2): mounted filesystem HASH_0DE-4EF9-7EE1-9C9E-BFD2D235025E ro with ordered data mode. Quota mode: none. [ 3.970610] systemd[1]: Inserted module 'autofs4' [ 4.016889] systemd[1]: systemd 255.4-1ubuntu8.4 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified) [ 4.016934] systemd[1]: Detected architecture x86-64. [ 4.019556] systemd[1]: Hostname set to ... [ 4.801100] systemd[1]: Configuration file /run/systemd/system/netplan-ovs-cleanup.service is marked world-inaccessible. This has no effect as configuration data is accessible via APIs without restrictions. Proceeding anyway. [ 4.939009] systemd[1]: Queued start job for default target graphical.target. [ 4.962724] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe. [ 4.964458] systemd[1]: Created slice system-systemd\x2dfsck.slice - Slice /system/systemd-fsck. [ 4.965088] systemd[1]: Created slice user.slice - User and Session Slice. [ 4.965356] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch. [ 4.965920] systemd[1]: Set up automount ... [ 4.965990] systemd[1]: Expecting device dev-disk-by\x2duuid-....device - /dev/disk/by-uuid/319E-2907... [ 4.966059] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes. [ 4.966135] systemd[1]: Reached target nss-user-lookup.target - User and Group Name Lookups. [ 4.966244] systemd[1]: Reached target remote-fs.target - Remote File Systems. [ 4.966274] systemd[1]: Reached target slices.target - Slice Units. [ 4.966344] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes. [ 4.966728] systemd[1]: Listening on dm-event.socket - Device-mapper event daemon FIFOs. [ 4.967065] systemd[1]: Listening on lvm2-lvmpolld.socket - LVM2 poll daemon socket. [ 4.967974] systemd[1]: Listening on syslog.socket - Syslog Socket. [ 4.971513] systemd[1]: Listening on systemd-coredump.socket - Process Core Dump Socket. [ 4.971818] systemd[1]: Listening on systemd-fsckd.socket - fsck to fsckd communication Socket. [ 4.971990] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe. [ 4.972318] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log). [ 4.972633] systemd[1]: Listening on systemd-journald.socket - Journal Socket. [ 4.972773] systemd[1]: systemd-pcrextend.socket - TPM2 PCR Extension (Varlink) was skipped because of an unmet condition check (ConditionSecurity=measured-uki). [ 4.973111] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket. [ 4.973505] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket. [ 4.986621] systemd[1]: Mounting dev-hugepages.mount - Huge Pages File System... [ 4.990322] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System... [ 4.997680] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System... [ 5.006568] systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System... [ 5.017809] systemd[1]: Starting systemd-journald.service - Journal Service... [ 5.018122] systemd[1]: Finished blk-availability.service - Availability of block devices. [ 5.030688] systemd[1]: Starting keyboard-setup.service - Set the console keyboard layout... [ 5.038484] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes... [ 5.047729] systemd[1]: Starting lvm2-monitor.service - Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling... [ 5.063700] systemd[1]: Starting XXX@XXX - Load Kernel Module configfs... [ 5.079253] systemd-journald[281]: Collecting audit messages is disabled. [ 5.082088] systemd[1]: Starting XXX@XXX - Load Kernel Module dm_mod... [ 5.101421] systemd[1]: Starting XXX@XXX - Load Kernel Module drm... [ 5.126658] systemd[1]: Starting XXX@XXX - Load Kernel Module efi_pstore... [ 5.155569] systemd[1]: Starting XXX@XXX - Load Kernel Module fuse... [ 5.194902] systemd[1]: Starting XXX@XXX - Load Kernel Module loop... [ 5.195145] systemd[1]: systemd-fsck-root.service - File System Check on Root Device was skipped because of an unmet condition check (ConditionPathExists=!/run/initramfs/fsck-root). [ 5.201622] pstore: Using crash dump compression: deflate [ 5.212694] pstore: Registered efi_pstore as persistent store backend [ 5.226719] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules... [ 5.226793] systemd[1]: systemd-pcrmachine.service - TPM2 PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionSecurity=measured-uki). [ 5.244678] systemd[1]: Starting systemd-remount-fs.service - Remount Root and Kernel File Systems... [ 5.244855] systemd[1]: systemd-tpm2-setup-early.service - TPM2 SRK Setup (Early) was skipped because of an unmet condition check (ConditionSecurity=measured-uki). [ 5.264656] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices... [ 5.277332] systemd[1]: Started systemd-journald.service - Journal Service. [ 5.312577] EXT4-fs (sda2): re-mounted HASH_0DE-4EF9-7EE1-9C9E-BFD2D235025E r/w. Quota mode: none. [ 5.312729] lp: driver loaded but no devices found [ 5.326457] ppdev: user-space parallel port driver [ 5.383327] Adding 4171772k swap on /swapfile. Priority:-2 extents:33 across:90038272k SS [ 5.430486] systemd-journald[281]: Received client request to flush runtime journal. [ 5.463073] systemd-journald[281]: /var/log/journal/517d1a2a572f4dce86fedc7fffe6f852/system.journal: Journal file uses a different sequence number ID, rotating. [ 5.463099] systemd-journald[281]: Rotating system journal. [ 6.768582] Consider using thermal netlink events interface [ 6.774582] input: Intel HID events as /devices/platform/INT33D5:00/input/input9 [ 6.783885] intel-hid INT33D5:00: platform supports 5 button array [ 6.784043] input: Intel HID 5 button array as /devices/platform/INT33D5:00/input/input10 [ 7.395662] Bluetooth: Core ver 2.22 [ 7.395775] NET: Registered PF_BLUETOOTH protocol family [ 7.395779] Bluetooth: HCI device and connection manager initialized [ 7.395790] Bluetooth: HCI socket layer initialized [ 7.395794] Bluetooth: L2CAP socket layer initialized [ 7.395805] Bluetooth: SCO socket layer initialized [ 7.515036] mc: Linux media interface: v0.10 [ 7.568060] i801_smbus 0000:00:1f.1: SPD Write Disable is set [ 7.568133] i801_smbus 0000:00:1f.1: SMBus using PCI interrupt [ 7.574361] i2c i2c-8: 2/2 memory slots populated (from DMI) [ 7.638280] usbcore: registered new interface driver btusb [ 7.652754] Bluetooth: hci0: Legacy ROM 2.5 revision 1.0 build 3 week 17 2014 [ 7.702321] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.10-fw-XXX.XXX.XXX.XXX.e.bseq [ 7.736809] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer [ 7.736832] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules [ 7.736834] RAPL PMU: hw unit of domain package 2^-14 Joules [ 7.736836] RAPL PMU: hw unit of domain dram 2^-14 Joules [ 7.736837] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules [ 7.742966] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 7.754470] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 7.754975] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 7.760686] cryptd: max_cpu_qlen set to 1000 [ 7.766354] videodev: Linux video capture interface: v2.00 [ 8.119771] Bluetooth: hci0: Intel BT fw patch 0x32 completed & activated [ 8.817538] SSE version of gcm_enc/dec engaged. [ 8.817574] Intel(R) Wireless WiFi driver for Linux [ 8.817999] iwlwifi 0000:01:00.0: enabling device (0000 -> 0002) [ 8.837516] i915 0000:00:02.0: vgaarb: deactivate vga console [ 8.839120] i915 0000:00:02.0: vgaarb: VGA decodes changed: olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 8.844666] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/bxt_dmc_ver1_07.bin (v1.7) [ 8.868503] intel_rapl_common: Found RAPL domain package [ 8.868520] intel_rapl_common: Found RAPL domain core [ 8.868523] intel_rapl_common: Found RAPL domain uncore [ 8.868527] intel_rapl_common: Found RAPL domain dram [ 8.889581] iwlwifi 0000:01:00.0: Detected crf-id 0x0, cnv-id 0x0 wfpm id 0x0 [ 8.889766] iwlwifi 0000:01:00.0: PCI dev 3165/8010, rev=0x210, rfid=0xd55555d5 [ 8.927443] iwlwifi 0000:01:00.0: Found debug destination: EXTERNAL_DRAM [ 8.927461] iwlwifi 0000:01:00.0: Found debug configuration: 0 [ 8.930444] iwlwifi 0000:01:00.0: loaded firmware version 29.4063824552.0 7265D-29.ucode op_mode iwlmvm [ 8.986558] usb 1-8: Found UVC 1.00 device USB 2.0 Camera (058f:3822) [ 8.998993] snd_hda_intel 0000:00:0e.0: DSP detected with PCI class/subclass/prog-if info 0x040380 [ 9.041966] usbcore: registered new interface driver uvcvideo [ 9.064039] snd_hda_intel 0000:00:0e.0: DSP detected with PCI class/subclass/prog-if info 0x040380 [ 9.066985] [drm] Initialized i915 1.6.0 20230929 for 0000:00:02.0 on minor 1 [ 9.069263] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 9.070246] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input11 [ 9.070682] snd_hda_intel 0000:00:0e.0: DSP detected with PCI class/subclass/prog-if info 0x040380 [ 9.072428] i915 display info: display version: 9 [ 9.072444] i915 display info: cursor_needs_physical: no [ 9.072446] i915 display info: has_cdclk_crawl: no [ 9.072448] i915 display info: has_cdclk_squash: no [ 9.072450] i915 display info: has_ddi: yes [ 9.072452] i915 display info: has_dp_mst: yes [ 9.072453] i915 display info: has_dsb: no [ 9.072455] i915 display info: has_fpga_dbg: yes [ 9.072457] i915 display info: has_gmch: no [ 9.072458] i915 display info: has_hotplug: yes [ 9.072460] i915 display info: has_hti: no [ 9.072462] i915 display info: has_ipc: yes [ 9.072464] i915 display info: has_overlay: no [ 9.072465] i915 display info: has_psr: yes [ 9.072467] i915 display info: has_psr_hw_tracking: yes [ 9.072469] i915 display info: overlay_needs_physical: no [ 9.072470] i915 display info: supports_tv: no [ 9.072472] i915 display info: has_hdcp: yes [ 9.072474] i915 display info: has_dmc: yes [ 9.072475] i915 display info: has_dsc: no [ 9.080435] snd_hda_intel 0000:00:0e.0: DSP detected with PCI class/subclass/prog-if info 0x040380 [ 9.135630] fbcon: i915drmfb (fb0) is primary device [ 9.135642] fbcon: Deferring console take-over [ 9.135650] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device [ 9.135869] snd_hda_intel 0000:00:0e.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) [ 9.207735] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC269VC: line_outs=1 (0x1b/0x0/0x0/0x0/0x0) type:speaker [ 9.207756] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 9.207760] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x15/0x0/0x0/0x0/0x0) [ 9.207763] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 [ 9.207765] snd_hda_codec_realtek hdaudioC0D0: inputs: [ 9.207769] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x19 [ 9.207772] snd_hda_codec_realtek hdaudioC0D0: Mic=0x18 [ 9.250708] iwlwifi 0000:01:00.0: Detected Intel(R) Dual Band Wireless AC 3165, REV=0x210 [ 9.250880] thermal thermal_zone4: failed to read out thermal zone (-61) [ 9.266737] iwlwifi 0000:01:00.0: Applying debug destination EXTERNAL_DRAM [ 9.269273] iwlwifi 0000:01:00.0: Allocated 0x00400000 bytes for firmware monitor. [ 9.273792] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:0e.0/sound/card0/input12 [ 9.273908] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:0e.0/sound/card0/input13 [ 9.273995] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:0e.0/sound/card0/input14 [ 9.274081] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:0e.0/sound/card0/input15 [ 9.274194] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:0e.0/sound/card0/input16 [ 9.281957] iwlwifi 0000:01:00.0: base HW address: XXX, OTP minor version: 0x0 [ 9.445747] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs' [ 9.455715] Creating 1 MTD partitions on "intel-spi": [ 9.455737] 0x000000000000-0x0000007ff000 : "BIOS" [ 9.503245] iwlwifi 0000:01:00.0 wlp1s0: renamed from wlan0 [ 9.526793] EDAC pnd2: b_cr_tolud_pci=080000001 ret=0 [ 9.526851] EDAC pnd2: b_cr_touud_lo_pci=080000000 ret=0 [ 9.526893] EDAC pnd2: b_cr_touud_hi_pci=000000001 ret=0 [ 9.526936] EDAC pnd2: b_cr_asym_mem_region0_mchbar=000000000 ret=0 [ 9.526978] EDAC pnd2: b_cr_asym_mem_region1_mchbar=000000000 ret=0 [ 9.527020] EDAC pnd2: b_cr_mot_out_base_mchbar=000000000 ret=0 [ 9.527062] EDAC pnd2: b_cr_mot_out_mask_mchbar=000000000 ret=0 [ 9.527143] EDAC pnd2: b_cr_slice_channel_hash=8000000c00000001 ret=0 [ 9.527219] EDAC pnd2: b_cr_asym_2way_mem_region_mchbar=000000000 ret=0 [ 9.527262] EDAC pnd2: d_cr_drp0=04488c093 ret=0 [ 9.527305] EDAC pnd2: d_cr_drp0=04488c093 ret=0 [ 9.527347] EDAC pnd2: d_cr_drp0=000000000 ret=2 [ 9.527388] EDAC pnd2: d_cr_drp0=000000000 ret=2 [ 9.527391] EDAC pnd2: Unsupported DIMM in channel 0 [ 9.527392] EDAC pnd2: Unsupported DIMM in channel 1 [ 9.527394] EDAC pnd2: Failed to register device with error -22. [ 9.568455] intel_telemetry_core Init [ 9.591099] Invalid pltconfig, ensure IPC1 device is enabled in BIOS [ 9.898981] spl: loading out-of-tree module taints kernel. [ 10.020719] zfs: module license 'CDDL' taints kernel. [ 10.020738] Disabling lock debugging due to kernel taint [ 10.020775] zfs: module license taints kernel. [ 14.852056] ZFS: Loaded module v2.2.2-0ubuntu9, ZFS pool version 5000, ZFS filesystem version 5 [ 15.966712] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 15.966732] Bluetooth: BNEP filters: protocol multicast [ 15.966743] Bluetooth: BNEP socket layer initialized [ 15.983429] Bluetooth: MGMT ver 1.22 [ 16.005722] NET: Registered PF_ALG protocol family [ 18.058596] NET: Registered PF_QIPCRTR protocol family [ 19.544302] iwlwifi 0000:01:00.0: Applying debug destination EXTERNAL_DRAM [ 19.624712] iwlwifi 0000:01:00.0: Applying debug destination EXTERNAL_DRAM [ 19.627824] iwlwifi 0000:01:00.0: FW already configured (0) - re-configuring [ 19.647401] iwlwifi 0000:01:00.0: Registered PHC clock: iwlwifi-PTP, with index: 0 [ 23.026282] Bluetooth: RFCOMM TTY layer initialized [ 23.026310] Bluetooth: RFCOMM socket layer initialized [ 23.026334] Bluetooth: RFCOMM ver 1.11 [ 23.419196] wlp1s0: authenticate with XXX (local address=XXX) [ 23.420680] wlp1s0: send auth to XXX (try 1/3) [ 23.442761] wlp1s0: authenticated [ 23.444230] wlp1s0: associate with XXX (try 1/3) [ 23.470456] wlp1s0: RX AssocResp from XXX (capab=0x1531 status=0 aid=7) [ 23.475531] wlp1s0: associated [ 23.531572] wlp1s0: Limiting TX power to 14 (14 - 0) dBm as advertised by XXX [ 54.197493] systemd-journald[281]: /var/log/journal/517d1a2a572f4dce86fedc7fffe6f852/user-XXXX.journal: Journal file uses a different sequence number ID, rotating. [ 354.663350] warning: `ThreadPoolForeg' uses wireless extensions which will stop working for Wi-Fi 7 hardware; use nl80211 [ 487.429266] perf: interrupt took too long (2540 > 2500), lowering kernel.perf_event_max_sample_rate to 78000 [ 613.181358] wlp1s0: deauthenticating from XXX by local choice (Reason: 3=DEAUTH_LEAVING) [ 613.789137] PM: suspend entry (deep) [ 613.798113] Filesystems sync: 0.008 seconds [ 613.805692] Freezing user space processes [ 613.808934] Freezing user space processes completed (elapsed 0.003 seconds) [ 613.808954] OOM killer disabled. [ 613.808957] Freezing remaining freezable tasks [ 613.810610] Freezing remaining freezable tasks completed (elapsed 0.001 seconds) [ 613.810691] printk: Suspending console(s) (use no_console_suspend to debug) [ 614.010398] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 614.010773] ata1.00: Entering standby power mode [ 614.224755] ACPI: EC: interrupt blocked [ 614.248183] ACPI: PM: Preparing to enter system sleep state S3 [ 614.248748] ACPI: EC: event blocked [ 614.248751] ACPI: EC: EC stopped [ 614.248752] ACPI: PM: Saving platform NVS memory [ 614.248812] Disabling non-boot CPUs ... [ 614.251254] smpboot: CPU 1 is now offline [ 614.263217] ACPI: PM: Low-level resume complete [ 614.263398] ACPI: EC: EC started [ 614.263404] ACPI: PM: Restoring platform NVS memory [ 614.265681] Enabling non-boot CPUs ... [ 614.265870] smpboot: Booting Node 0 Processor 1 APIC 0x4 [ 614.275023] CPU1 is up [ 614.275446] ACPI: PM: Waking up from system sleep state S3 [ 614.282170] ACPI: EC: interrupt unblocked [ 614.309203] ACPI: EC: event unblocked [ 614.469290] OOM killer enabled. [ 614.469305] Restarting tasks ... done. [ 614.483807] random: crng reseeded on system resumption [ 614.588301] PM: suspend exit [ 614.589098] thermal thermal_zone4: failed to read out thermal zone (-61) [ 614.791572] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 614.792217] ata1.00: NCQ Send/Recv Log not supported [ 614.793597] sd 0:0:0:0: [sda] Starting disk [ 614.794317] ata1.00: NCQ Send/Recv Log not supported [ 619.741867] ACPI: button: The lid device is not compliant to SW_LID. [ 630.096962] ata1.00: qc timeout after 15000 msecs (cmd 0x47) [ 630.098068] ata1.00: Read log 0x00 page 0x00 failed, Emask 0x4 [ 630.098087] ata1.00: ATA Identify Device Log not supported [ 630.098106] ata1.00: configured for UDMA/133 [ 630.098117] ata1.00: Check power mode failed (err_mask=0x40) [ 630.098125] ata1.00: Entering active power mode [ 630.098129] ata1.00: VERIFY failed (err_mask=0x40) [ 630.098149] ahci 0000:00:12.0: port does not support device sleep [ 630.098158] ata1.00: failed to enable DIPM, Emask 0x40 [ 630.560934] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 630.561443] ata1.00: NCQ Send/Recv Log not supported [ 630.561769] ata1.00: NCQ Send/Recv Log not supported [ 630.561786] ata1.00: configured for UDMA/133 [ 630.561804] ahci 0000:00:12.0: port does not support device sleep [ 630.567912] sd 0:0:0:0: [sda] Starting disk [ 630.965607] iwlwifi 0000:01:00.0: Applying debug destination EXTERNAL_DRAM [ 631.070022] iwlwifi 0000:01:00.0: Applying debug destination EXTERNAL_DRAM [ 631.079634] iwlwifi 0000:01:00.0: FW already configured (0) - re-configuring [ 634.909687] wlp1s0: authenticate with XXX (local address=XXX) [ 634.910697] wlp1s0: send auth to XXX (try 1/3) [ 634.916297] wlp1s0: authenticated [ 634.917297] wlp1s0: associate with XXX (try 1/3) [ 634.942029] wlp1s0: RX AssocResp from XXX (capab=0x1531 status=0 aid=8) [ 634.944619] wlp1s0: associated [ 634.986566] wlp1s0: Limiting TX power to 14 (14 - 0) dBm as advertised by XXX [ 747.278517] perf: interrupt took too long (3220 > 3175), lowering kernel.perf_event_max_sample_rate to 62000 [ 970.858206] perf: interrupt took too long (4047 > 4025), lowering kernel.perf_event_max_sample_rate to 49000 [ 1324.105331] perf: interrupt took too long (5066 > 5058), lowering kernel.perf_event_max_sample_rate to 39000 [ 1552.433344] perf: interrupt took too long (6339 > 6332), lowering kernel.perf_event_max_sample_rate to 31000 [ 1911.895092] wlp1s0: deauthenticating from XXX by local choice (Reason: 3=DEAUTH_LEAVING) [ 1912.382885] PM: suspend entry (deep) [ 1912.399478] Filesystems sync: 0.016 seconds [ 1912.409217] Freezing user space processes [ 1912.536964] Freezing user space processes completed (elapsed 0.127 seconds) [ 1912.536990] OOM killer disabled. [ 1912.536993] Freezing remaining freezable tasks [ 1912.538820] Freezing remaining freezable tasks completed (elapsed 0.001 seconds) [ 1912.538897] printk: Suspending console(s) (use no_console_suspend to debug) [ 1912.739514] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 1912.740010] ata1.00: Entering standby power mode [ 1913.039358] ACPI: EC: interrupt blocked [ 1913.068131] ACPI: PM: Preparing to enter system sleep state S3 [ 1913.069199] ACPI: EC: event blocked [ 1913.069206] ACPI: EC: EC stopped [ 1913.069209] ACPI: PM: Saving platform NVS memory [ 1913.069299] Disabling non-boot CPUs ... [ 1913.072469] smpboot: CPU 1 is now offline [ 1913.087874] ACPI: PM: Low-level resume complete [ 1913.088058] ACPI: EC: EC started [ 1913.088065] ACPI: PM: Restoring platform NVS memory [ 1913.089494] Enabling non-boot CPUs ... [ 1913.089684] smpboot: Booting Node 0 Processor 1 APIC 0x4 [ 1913.098391] CPU1 is up [ 1913.098848] ACPI: PM: Waking up from system sleep state S3 [ 1913.107508] ACPI: EC: interrupt unblocked [ 1913.127609] ACPI: EC: event unblocked [ 1913.394516] OOM killer enabled. [ 1913.394532] Restarting tasks ... done. [ 1913.420448] random: crng reseeded on system resumption [ 1913.537169] PM: suspend exit [ 1913.538132] thermal thermal_zone4: failed to read out thermal zone (-61) [ 1913.604928] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1913.605456] ata1.00: NCQ Send/Recv Log not supported [ 1913.605493] sd 0:0:0:0: [sda] Starting disk [ 1913.605795] ata1.00: NCQ Send/Recv Log not supported [ 1913.605803] ata1.00: configured for UDMA/133 [ 1913.605846] ahci 0000:00:12.0: port does not support device sleep [ 1914.224550] iwlwifi 0000:01:00.0: Applying debug destination EXTERNAL_DRAM [ 1914.313092] iwlwifi 0000:01:00.0: Applying debug destination EXTERNAL_DRAM [ 1914.319580] iwlwifi 0000:01:00.0: FW already configured (0) - re-configuring [ 1918.086155] wlp1s0: authenticate with XXX (local address=XXX) [ 1918.087577] wlp1s0: send auth to XXX (try 1/3) [ 1918.091961] wlp1s0: authenticated [ 1918.094364] wlp1s0: associate with XXX (try 1/3) [ 1918.112819] wlp1s0: RX AssocResp from XXX (capab=0x1131 status=0 aid=2) [ 1918.116458] wlp1s0: associated [ 1918.165933] wlp1s0: Limiting TX power to 14 (14 - 0) dBm as advertised by XXX [ 2086.677359] perf: interrupt took too long (7934 > 7923), lowering kernel.perf_event_max_sample_rate to 25000 [ 2205.973501] process '...' started with executable stack [ 2453.619368] i915 0000:00:02.0: [drm] *ERROR* CPU pipe A FIFO underrun [ 3293.943032] systemd[1]: systemd 255.4-1ubuntu8.4 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified) [ 3293.943447] systemd[1]: Detected architecture x86-64. [ 3294.392818] systemd[1]: Configuration file /run/systemd/system/netplan-ovs-cleanup.service is marked world-inaccessible. This has no effect as configuration data is accessible via APIs without restrictions. Proceeding anyway. [ 3384.644789] perf: interrupt took too long (9931 > 9917), lowering kernel.perf_event_max_sample_rate to 20000 [ 5840.096902] snd_hda_intel 0000:00:0e.0: Too big adjustment 512 [ 6403.164424] wlp1s0: disassociated from XXX (Reason: 3=DEAUTH_LEAVING) [ 6738.556898] show_signal_msg: 108 callbacks suppressed [ 6738.556920] cinnamon-deskto[17856]: segfault at 30 ip 00007a49e75c961a sp 00007ffec86184c0 error 4 in libgobject-2.0.so.0.8000.0[7a49e75b4000+37000] likely on CPU 1 (core 2, socket 0) [ 6738.556975] Code: 31 d2 4c 89 e7 e8 36 b3 fe ff 48 89 df e8 3e fc 00 00 8b 35 f0 da 03 00 31 c9 31 d2 4c 89 e7 e8 1c b3 fe ff 48 8b 03 48 89 df <ff> 50 30 48 89 df e8 db 57 01 00 e9 7e fe ff ff 66 0f 1f 44 00 00 [ 7526.116129] PM: suspend entry (deep) [ 7526.129430] Filesystems sync: 0.013 seconds [ 7526.143651] Freezing user space processes [ 7526.152361] Freezing user space processes completed (elapsed 0.008 seconds) [ 7526.152384] OOM killer disabled. [ 7526.152387] Freezing remaining freezable tasks [ 7526.154564] Freezing remaining freezable tasks completed (elapsed 0.002 seconds) [ 7526.154641] printk: Suspending console(s) (use no_console_suspend to debug) [ 7526.351257] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 7526.351623] ata1.00: Entering standby power mode [ 7526.655064] ACPI: EC: interrupt blocked [ 7526.681082] ACPI: PM: Preparing to enter system sleep state S3 [ 7526.681538] ACPI: EC: event blocked [ 7526.681540] ACPI: EC: EC stopped [ 7526.681541] ACPI: PM: Saving platform NVS memory [ 7526.681588] Disabling non-boot CPUs ... [ 7526.683895] smpboot: CPU 1 is now offline [ 7526.696640] ACPI: PM: Low-level resume complete [ 7526.696823] ACPI: EC: EC started [ 7526.696830] ACPI: PM: Restoring platform NVS memory [ 7526.698148] Enabling non-boot CPUs ... [ 7526.698334] smpboot: Booting Node 0 Processor 1 APIC 0x4 [ 7526.707651] CPU1 is up [ 7526.708062] ACPI: PM: Waking up from system sleep state S3 [ 7526.715449] ACPI: EC: interrupt unblocked [ 7526.944571] ACPI: EC: event unblocked [ 7527.211186] OOM killer enabled. [ 7527.211202] Restarting tasks ... done. [ 7527.222102] random: crng reseeded on system resumption [ 7527.339874] PM: suspend exit [ 7527.339987] thermal thermal_zone4: failed to read out thermal zone (-61) [ 7527.428720] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 7527.429327] ata1.00: NCQ Send/Recv Log not supported [ 7527.429391] sd 0:0:0:0: [sda] Starting disk [ 7527.429912] ata1.00: NCQ Send/Recv Log not supported [ 7527.429919] ata1.00: configured for UDMA/133 [ 7527.429965] ahci 0000:00:12.0: port does not support device sleep [ 7528.813000] systemd-journald[281]: Under memory pressure, flushing caches. [ 7552.464813] PM: suspend entry (deep) [ 7552.477200] Filesystems sync: 0.012 seconds [ 7552.484599] Freezing user space processes [ 7552.488068] Freezing user space processes completed (elapsed 0.003 seconds) [ 7552.488082] OOM killer disabled. [ 7552.488084] Freezing remaining freezable tasks [ 7552.490349] Freezing remaining freezable tasks completed (elapsed 0.002 seconds) [ 7552.490428] printk: Suspending console(s) (use no_console_suspend to debug) [ 7552.688997] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 7552.690765] ata1.00: Entering standby power mode [ 7552.864716] ACPI: EC: interrupt blocked [ 7552.892785] ACPI: PM: Preparing to enter system sleep state S3 [ 7552.893316] ACPI: EC: event blocked [ 7552.893318] ACPI: EC: EC stopped [ 7552.893319] ACPI: PM: Saving platform NVS memory [ 7552.893363] Disabling non-boot CPUs ... [ 7552.896144] smpboot: CPU 1 is now offline [ 7552.905855] ACPI: PM: Low-level resume complete [ 7552.906045] ACPI: EC: EC started [ 7552.906052] ACPI: PM: Restoring platform NVS memory [ 7552.910232] Enabling non-boot CPUs ... [ 7552.910488] smpboot: Booting Node 0 Processor 1 APIC 0x4 [ 7552.918736] CPU1 is up [ 7552.919174] ACPI: PM: Waking up from system sleep state S3 [ 7552.926744] ACPI: EC: interrupt unblocked [ 7552.954616] ACPI: EC: event unblocked [ 7553.108330] OOM killer enabled. [ 7553.108340] Restarting tasks ... done. [ 7553.148715] random: crng reseeded on system resumption [ 7553.268429] PM: suspend exit [ 7553.270336] thermal thermal_zone4: failed to read out thermal zone (-61) [ 7553.419159] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 7553.419731] ata1.00: NCQ Send/Recv Log not supported [ 7553.419776] sd 0:0:0:0: [sda] Starting disk [ 7553.420365] ata1.00: NCQ Send/Recv Log not supported [ 7553.420375] ata1.00: configured for UDMA/133 [ 7553.420415] ahci 0000:00:12.0: port does not support device sleep [ 8779.438294] usb 1-2: new full-speed USB device number 6 using xhci_hcd [ 8779.566516] usb 1-2: New USB device found, idVendor=301a, idProduct=5627, bcdDevice= 1.00 [ 8779.566535] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 8779.566538] usb 1-2: Product: V8 [ 8779.566541] usb 1-2: Manufacturer: SmartlinkTechnology [ 8779.566543] usb 1-2: SerialNumber: ... [ 8779.572820] hid-generic 0003:301A:5627.0003: hiddev1,hidraw2: USB HID v2.01 Device [SmartlinkTechnology V8] on usb-0000:00:15.0-2/input4 [ 8779.646206] usb-storage 1-2:1.0: USB Mass Storage device detected [ 8779.650420] scsi host1: usb-storage 1-2:1.0 [ 8779.650686] usbcore: registered new interface driver usb-storage [ 8779.658825] usbcore: registered new interface driver uas [ 8779.708835] usb 1-2: current rate 128 is different from the runtime rate 48000 [ 8779.712094] usb 1-2: current rate 128 is different from the runtime rate 48000 [ 8779.737797] usbcore: registered new interface driver snd-usb-audio [ 8779.947613] usb 1-2: current rate 128 is different from the runtime rate 48000 [ 8779.978117] usb 1-2: current rate 128 is different from the runtime rate 48000 [ 8779.982136] usb 1-2: current rate 128 is different from the runtime rate 48000 [ 8779.991245] usb 1-2: current rate 128 is different from the runtime rate 48000 [ 8779.995848] usb 1-2: current rate 128 is different from the runtime rate 48000 [ 8780.010233] usb 1-2: current rate 128 is different from the runtime rate 48000 [ 8780.013534] usb 1-2: current rate 128 is different from the runtime rate 48000 [ 8780.016797] usb 1-2: current rate 128 is different from the runtime rate 48000 [ 8780.103847] usb 1-2: current rate 128 is different from the runtime rate 48000 [ 8780.115425] usb 1-2: current rate 128 is different from the runtime rate 48000 [ 8780.119459] usb 1-2: current rate 128 is different from the runtime rate 48000 [ 8780.132184] usb 1-2: current rate 128 is different from the runtime rate 48000 [ 8780.135469] usb 1-2: current rate 128 is different from the runtime rate 48000 [ 8780.488541] usb 1-2: USB disconnect, device number 6 [ 8780.871312] usb 1-2: new full-speed USB device number 7 using xhci_hcd [ 8780.999768] usb 1-2: New USB device found, idVendor=301a, idProduct=5627, bcdDevice= 1.00 [ 8780.999799] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 8780.999808] usb 1-2: Product: V8 [ 8780.999815] usb 1-2: Manufacturer: SmartlinkTechnology [ 8780.999822] usb 1-2: SerialNumber: ... [ 8781.004014] usb-storage 1-2:1.0: USB Mass Storage device detected [ 8781.004551] scsi host1: usb-storage 1-2:1.0 [ 8781.006500] usb 1-2: current rate 128 is different from the runtime rate 48000 [ 8781.007927] usb 1-2: current rate 128 is different from the runtime rate 48000 [ 8781.023708] hid-generic 0003:301A:5627.0004: hiddev1,hidraw2: USB HID v2.01 Device [SmartlinkTechnology V8] on usb-0000:00:15.0-2/input4 [ 8781.194922] usb 1-2: current rate 128 is different from the runtime rate 48000 [ 8781.215902] usb 1-2: current rate 128 is different from the runtime rate 48000 [ 8781.218729] usb 1-2: current rate 128 is different from the runtime rate 48000 [ 8781.222440] usb 1-2: current rate 128 is different from the runtime rate 48000 [ 8781.225982] usb 1-2: current rate 128 is different from the runtime rate 48000 [ 8781.241922] usb 1-2: current rate 128 is different from the runtime rate 48000 [ 8781.244459] usb 1-2: current rate 128 is different from the runtime rate 48000 [ 8781.248952] usb 1-2: current rate 128 is different from the runtime rate 48000 [ 8781.296451] usb 1-2: current rate 128 is different from the runtime rate 48000 [ 8781.300039] usb 1-2: current rate 128 is different from the runtime rate 48000 [ 8781.305107] usb 1-2: current rate 128 is different from the runtime rate 48000 [ 8781.316622] usb 1-2: current rate 128 is different from the runtime rate 48000 [ 8781.320936] usb 1-2: current rate 128 is different from the runtime rate 48000 [ 8781.521585] usb 1-2: USB disconnect, device number 7 [ 8781.775195] usb 1-2: new full-speed USB device number 8 using xhci_hcd [ 8781.903851] usb 1-2: New USB device found, idVendor=301a, idProduct=5627, bcdDevice= 1.00 [ 8781.903877] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 8781.903884] usb 1-2: Product: V8 [ 8781.903889] usb 1-2: Manufacturer: SmartlinkTechnology [ 8781.903894] usb 1-2: SerialNumber: ... [ 8781.908478] usb-storage 1-2:1.0: USB Mass Storage device detected [ 8781.909037] scsi host1: usb-storage 1-2:1.0 [ 8781.912546] usb 1-2: current rate 128 is different from the runtime rate 48000 [ 8781.914690] usb 1-2: current rate 128 is different from the runtime rate 48000 [ 8781.933049] hid-generic 0003:301A:5627.0005: hiddev1,hidraw2: USB HID v2.01 Device [SmartlinkTechnology V8] on usb-0000:00:15.0-2/input4 [ 8782.109467] usb 1-2: current rate 128 is different from the runtime rate 48000 [ 8782.131742] usb 1-2: current rate 128 is different from the runtime rate 48000 [ 8782.135049] usb 1-2: current rate 128 is different from the runtime rate 48000 [ 8782.139990] usb 1-2: current rate 128 is different from the runtime rate 48000 [ 8782.143171] usb 1-2: current rate 128 is different from the runtime rate 48000 [ 8782.158425] usb 1-2: current rate 128 is different from the runtime rate 48000 [ 8782.161094] usb 1-2: current rate 128 is different from the runtime rate 48000 [ 8782.164628] usb 1-2: current rate 128 is different from the runtime rate 48000 [ 8782.209078] usb 1-2: current rate 128 is different from the runtime rate 48000 [ 8782.212497] usb 1-2: current rate 128 is different from the runtime rate 48000 [ 8782.216090] usb 1-2: current rate 128 is different from the runtime rate 48000 [ 8782.225942] usb 1-2: current rate 128 is different from the runtime rate 48000 [ 8782.229036] usb 1-2: current rate 128 is different from the runtime rate 48000 [ 8782.284335] usb 1-2: USB disconnect, device number 8 [ 8782.588164] usb 1-2: new full-speed USB device number 9 using xhci_hcd [ 8834.803944] usb 1-3: USB disconnect, device number 2 [ 8884.572356] usb 1-3: new full-speed USB device number 10 using xhci_hcd [ 8884.702548] usb 1-3: New USB device found, idVendor=1ea7, idProduct=0064, bcdDevice= 2.00 [ 8884.702580] usb 1-3: New USB device strings: Mfr=0, Product=1, SerialNumber=... [ 8884.702589] usb 1-3: Product: 2.4G Mouse [ 8884.710502] input: 2.4G Mouse as /devices/pci0000:00/0000:00:15.0/usb1/1-3/1-3:1.0/0003:1EA7:0064.0006/input/input17 [ 8884.710907] input: 2.4G Mouse as /devices/pci0000:00/0000:00:15.0/usb1/1-3/1-3:1.0/0003:1EA7:0064.0006/input/input18 [ 8884.711522] hid-generic 0003:1EA7:0064.0006: input,hiddev0,hidraw1: USB HID v1.10 Mouse [2.4G Mouse] on usb-0000:00:15.0-3/input0 [ 9048.454251] usb 1-2: new full-speed USB device number 11 using xhci_hcd [ 9048.582957] usb 1-2: New USB device found, idVendor=301a, idProduct=5627, bcdDevice= 1.00 [ 9048.583028] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 9048.583038] usb 1-2: Product: V8 [ 9048.583046] usb 1-2: Manufacturer: SmartlinkTechnology [ 9048.583053] usb 1-2: SerialNumber: ... [ 9048.587129] usb-storage 1-2:1.0: USB Mass Storage device detected [ 9048.587668] scsi host1: usb-storage 1-2:1.0 [ 9048.589859] usb 1-2: current rate 128 is different from the runtime rate 48000 [ 9048.594420] usb 1-2: current rate 128 is different from the runtime rate 48000 [ 9048.608775] hid-generic 0003:301A:5627.0007: hiddev1,hidraw2: USB HID v2.01 Device [SmartlinkTechnology V8] on usb-0000:00:15.0-2/input4 [ 9048.774939] usb 1-2: current rate 128 is different from the runtime rate 48000 [ 9048.796729] usb 1-2: current rate 128 is different from the runtime rate 48000 [ 9048.800720] usb 1-2: current rate 128 is different from the runtime rate 48000 [ 9048.805865] usb 1-2: current rate 128 is different from the runtime rate 48000 [ 9048.809435] usb 1-2: current rate 128 is different from the runtime rate 48000 [ 9048.823684] usb 1-2: current rate 128 is different from the runtime rate 48000 [ 9048.825379] usb 1-2: current rate 128 is different from the runtime rate 48000 [ 9048.828466] usb 1-2: current rate 128 is different from the runtime rate 48000 [ 9048.870482] usb 1-2: current rate 128 is different from the runtime rate 48000 [ 9048.873512] usb 1-2: current rate 128 is different from the runtime rate 48000 [ 9048.876724] usb 1-2: current rate 128 is different from the runtime rate 48000 [ 9048.886935] usb 1-2: current rate 128 is different from the runtime rate 48000 [ 9048.889290] usb 1-2: current rate 128 is different from the runtime rate 48000 [ 9049.597039] scsi 1:0:0:0: Direct-Access SMTLINK COMP_AUDIO 1.10 PQ: 0 ANSI: 2 [ 9049.598298] sd 1:0:0:0: [sdb] Media removed, stopped polling [ 9049.599467] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 9049.600783] sd 1:0:0:0: [sdb] Attached SCSI removable disk [ 9054.442450] usb 1-2: current rate 128 is different from the runtime rate 48000 [ 9068.100206] usb 1-2: current rate 128 is different from the runtime rate 48000 [ 9073.866943] usb 1-2: current rate 128 is different from the runtime rate 48000 [ 9088.004713] usb 1-2: current rate 128 is different from the runtime rate 48000 [ 9109.936769] usb 1-2: current rate 128 is different from the runtime rate 48000 [ 9116.235444] usb 1-2: current rate 128 is different from the runtime rate 48000 [ 9122.523031] usb 1-2: current rate 128 is different from the runtime rate 48000 [ 9128.332470] usb 1-2: current rate 128 is different from the runtime rate 48000 [ 9160.084896] usb 1-2: current rate 128 is different from the runtime rate 48000 [ 9222.281415] usb 1-2: current rate 128 is different from the runtime rate 48000 [ 9438.874478] usb 1-2: USB disconnect, device number 11 [ 9438.875236] usb 1-2: Unable to submit urb #3: -19 at snd_usb_queue_pending_output_urbs [ 9438.876064] usb 1-2: cannot submit urb 0, error -19: no device [ 9438.881528] usb 1-2: cannot submit urb 0, error -19: no device [ 9438.886860] usb 1-2: cannot submit urb 0, error -19: no device [ 9438.892110] usb 1-2: cannot submit urb 0, error -19: no device [ 9439.211651] usb 1-2: new full-speed USB device number 12 using xhci_hcd [ 9439.325941] usb 1-2: Device not responding to setup address. [ 9439.533757] usb 1-2: Device not responding to setup address. [ 9439.741677] usb 1-2: device not accepting address 12, error -71 [ 9439.741771] usb 1-2: WARN: invalid context state for evaluate context command. [ 9440.329611] usb 1-2: new full-speed USB device number 13 using xhci_hcd [ 9440.457505] usb 1-2: New USB device found, idVendor=301a, idProduct=5627, bcdDevice= 1.00 [ 9440.457559] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 9440.457563] usb 1-2: Product: V8 [ 9440.457566] usb 1-2: Manufacturer: SmartlinkTechnology [ 9440.457568] usb 1-2: SerialNumber: ... [ 9440.462441] usb-storage 1-2:1.0: USB Mass Storage device detected [ 9440.463424] scsi host1: usb-storage 1-2:1.0 [ 9440.465882] usb 1-2: current rate 128 is different from the runtime rate 48000 [ 9440.466807] usb 1-2: current rate 128 is different from the runtime rate 48000 [ 9440.479491] hid-generic 0003:301A:5627.0008: hiddev1,hidraw2: USB HID v2.01 Device [SmartlinkTechnology V8] on usb-0000:00:15.0-2/input4 [ 9440.720581] usb 1-2: current rate 128 is different from the runtime rate 48000 [ 9440.748055] usb 1-2: current rate 128 is different from the runtime rate 48000 [ 9440.752032] usb 1-2: current rate 128 is different from the runtime rate 48000 [ 9440.757570] usb 1-2: current rate 128 is different from the runtime rate 48000 [ 9440.761467] usb 1-2: current rate 128 is different from the runtime rate 48000 [ 9440.782080] usb 1-2: current rate 128 is different from the runtime rate 48000 [ 9440.784958] usb 1-2: current rate 128 is different from the runtime rate 48000 [ 9440.790186] usb 1-2: current rate 128 is different from the runtime rate 48000 [ 9440.853944] usb 1-2: current rate 128 is different from the runtime rate 48000 [ 9440.858237] usb 1-2: current rate 128 is different from the runtime rate 48000 [ 9440.862920] usb 1-2: current rate 128 is different from the runtime rate 48000 [ 9440.887549] usb 1-2: current rate 128 is different from the runtime rate 48000 [ 9440.892879] usb 1-2: current rate 128 is different from the runtime rate 48000 [ 9441.131162] usb 1-2: 2:1: usb_set_interface failed (-71) [ 9441.518136] scsi 1:0:0:0: Direct-Access SMTLINK COMP_AUDIO 1.10 PQ: 0 ANSI: 2 [ 9441.519167] sd 1:0:0:0: [sdb] Media removed, stopped polling [ 9441.519726] sd 1:0:0:0: [sdb] Attached SCSI removable disk [ 9441.520035] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 9441.723377] usb 1-2: 2:1: cannot set freq 48000 to ep 0x2 [ 9441.738561] usb 1-2: USB disconnect, device number 13 [ 9442.082653] usb 1-2: new full-speed USB device number 14 using xhci_hcd [ 9442.210567] usb 1-2: New USB device found, idVendor=301a, idProduct=5627, bcdDevice= 1.00 [ 9442.210586] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 9442.210589] usb 1-2: Product: V8 [ 9442.210592] usb 1-2: Manufacturer: SmartlinkTechnology [ 9442.210594] usb 1-2: SerialNumber: ... [ 9442.212841] usb-storage 1-2:1.0: USB Mass Storage device detected [ 9442.213174] scsi host1: usb-storage 1-2:1.0 [ 9442.215499] usb 1-2: current rate 128 is different from the runtime rate 48000 [ 9442.216868] usb 1-2: current rate 128 is different from the runtime rate 48000 [ 9442.229808] hid-generic 0003:301A:5627.0009: hiddev1,hidraw2: USB HID v2.01 Device [SmartlinkTechnology V8] on usb-0000:00:15.0-2/input4 [ 9442.512160] usb 1-2: current rate 128 is different from the runtime rate 48000 [ 9442.543766] usb 1-2: current rate 128 is different from the runtime rate 48000 [ 9442.548289] usb 1-2: current rate 128 is different from the runtime rate 48000 [ 9442.554312] usb 1-2: current rate 128 is different from the runtime rate 48000 [ 9442.558942] usb 1-2: current rate 128 is different from the runtime rate 48000 [ 9442.579916] usb 1-2: current rate 128 is different from the runtime rate 48000 [ 9442.582412] usb 1-2: current rate 128 is different from the runtime rate 48000 [ 9442.588732] usb 1-2: current rate 128 is different from the runtime rate 48000 [ 9442.635611] usb 1-2: USB disconnect, device number 14 [ 9442.909510] usb 1-2: new full-speed USB device number 15 using xhci_hcd [ 9443.037604] usb 1-2: New USB device found, idVendor=301a, idProduct=5627, bcdDevice= 1.00 [ 9443.037623] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 9443.037626] usb 1-2: Product: V8 [ 9443.037629] usb 1-2: Manufacturer: SmartlinkTechnology [ 9443.037632] usb 1-2: SerialNumber: ... [ 9443.040591] usb-storage 1-2:1.0: USB Mass Storage device detected [ 9443.040937] scsi host1: usb-storage 1-2:1.0 [ 9443.042830] usb 1-2: current rate 128 is different from the runtime rate 48000 [ 9443.044606] usb 1-2: current rate 128 is different from the runtime rate 48000 [ 9443.057158] hid-generic 0003:301A:5627.000A: hiddev1,hidraw2: USB HID v2.01 Device [SmartlinkTechnology V8] on usb-0000:00:15.0-2/input4 [ 9443.312521] usb 1-2: current rate 128 is different from the runtime rate 48000 [ 9443.345091] usb 1-2: current rate 128 is different from the runtime rate 48000 [ 9443.349322] usb 1-2: current rate 128 is different from the runtime rate 48000 [ 9443.360139] usb 1-2: current rate 128 is different from the runtime rate 48000 [ 9443.365496] usb 1-2: current rate 128 is different from the runtime rate 48000 [ 9443.396756] usb 1-2: current rate 128 is different from the runtime rate 48000 [ 9443.402289] usb 1-2: current rate 128 is different from the runtime rate 48000 [ 9443.406241] usb 1-2: current rate 128 is different from the runtime rate 48000 [ 9443.490849] usb 1-2: current rate 128 is different from the runtime rate 48000 [ 9443.498184] usb 1-2: current rate 128 is different from the runtime rate 48000 [ 9443.502295] usb 1-2: current rate 128 is different from the runtime rate 48000 [ 9443.522518] usb 1-2: current rate 128 is different from the runtime rate 48000 [ 9443.526875] usb 1-2: current rate 128 is different from the runtime rate 48000 [ 9443.660012] usb 1-2: current rate 128 is different from the runtime rate 48000 [ 9443.946291] usb 1-2: USB disconnect, device number 15 [ 9443.948189] xhci_hcd 0000:00:15.0: ERROR Transfer event TRB DMA ptr not part of current TD ep_index 3 comp_code 1 [ 9443.948213] xhci_hcd 0000:00:15.0: Looking for event-dma 0000000147c641c0 trb-start 0000000147c641d0 trb-end 0000000147c641d0 seg-start 0000000147c64000 seg-end 0000000147c64ff0 [ 9443.948224] xhci_hcd 0000:00:15.0: ERROR Transfer event TRB DMA ptr not part of current TD ep_index 3 comp_code 1 [ 9443.948227] xhci_hcd 0000:00:15.0: Looking for event-dma 0000000147c641d0 trb-start 0000000147c641e0 trb-end 0000000147c641e0 seg-start 0000000147c64000 seg-end 0000000147c64ff0 [ 9443.948252] usb 1-2: Unable to submit urb #1: -19 at snd_usb_queue_pending_output_urbs [ 9443.950062] usb 1-2: cannot submit urb 0, error -19: no device [ 9444.226430] usb 1-2: new full-speed USB device number 16 using xhci_hcd [ 9445.378045] usb 1-2: device descriptor read/64, error -71 [ 9445.613487] usb 1-2: New USB device found, idVendor=301a, idProduct=5627, bcdDevice= 1.00 [ 9445.613517] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 9445.613521] usb 1-2: Product: V8 [ 9445.613524] usb 1-2: Manufacturer: SmartlinkTechnology [ 9445.613526] usb 1-2: SerialNumber: ... [ 9445.615690] usb-storage 1-2:1.0: USB Mass Storage device detected [ 9445.616052] scsi host1: usb-storage 1-2:1.0 [ 9445.618817] usb 1-2: current rate 128 is different from the runtime rate 48000 [ 9445.620099] usb 1-2: current rate 128 is different from the runtime rate 48000 [ 9445.634045] hid-generic 0003:301A:5627.000B: hiddev1,hidraw2: USB HID v2.01 Device [SmartlinkTechnology V8] on usb-0000:00:15.0-2/input4 [ 9445.941569] usb 1-2: current rate 128 is different from the runtime rate 48000 [ 9445.988422] usb 1-2: current rate 128 is different from the runtime rate 48000 [ 9445.994979] usb 1-2: current rate 128 is different from the runtime rate 48000 [ 9446.000682] usb 1-2: current rate 128 is different from the runtime rate 48000 [ 9446.004547] usb 1-2: current rate 128 is different from the runtime rate 48000 [ 9446.031518] usb 1-2: current rate 128 is different from the runtime rate 48000 [ 9446.034247] usb 1-2: current rate 128 is different from the runtime rate 48000 [ 9446.039777] usb 1-2: current rate 128 is different from the runtime rate 48000 [ 9446.107618] usb 1-2: current rate 128 is different from the runtime rate 48000 [ 9446.112296] usb 1-2: current rate 128 is different from the runtime rate 48000 [ 9446.116354] usb 1-2: current rate 128 is different from the runtime rate 48000 [ 9446.132064] usb 1-2: current rate 128 is different from the runtime rate 48000 [ 9446.137049] usb 1-2: current rate 128 is different from the runtime rate 48000 [ 9446.310069] usb 1-2: current rate 128 is different from the runtime rate 48000 [ 9446.464476] usb 1-2: USB disconnect, device number 16 [ 9446.466187] xhci_hcd 0000:00:15.0: ERROR Transfer event TRB DMA ptr not part of current TD ep_index 3 comp_code 1 [ 9446.466209] xhci_hcd 0000:00:15.0: Looking for event-dma 0000000104513990 trb-start 00000001045139a0 trb-end 00000001045139a0 seg-start 0000000104513000 seg-end 0000000104513ff0 [ 9446.467187] xhci_hcd 0000:00:15.0: ERROR Transfer event TRB DMA ptr not part of current TD ep_index 3 comp_code 1 [ 9446.467213] xhci_hcd 0000:00:15.0: Looking for event-dma 00000001045139a0 trb-start 00000001045139b0 trb-end 00000001045139b0 seg-start 0000000104513000 seg-end 0000000104513ff0 [ 9446.469196] xhci_hcd 0000:00:15.0: ERROR Transfer event TRB DMA ptr not part of current TD ep_index 3 comp_code 1 [ 9446.469221] xhci_hcd 0000:00:15.0: Looking for event-dma 00000001045139b0 trb-start 00000001045139c0 trb-end 00000001045139c0 seg-start 0000000104513000 seg-end 0000000104513ff0 [ 9446.469234] xhci_hcd 0000:00:15.0: ERROR Transfer event TRB DMA ptr not part of current TD ep_index 3 comp_code 1 [ 9446.469238] xhci_hcd 0000:00:15.0: Looking for event-dma 00000001045139c0 trb-start 00000001045139d0 trb-end 00000001045139d0 seg-start 0000000104513000 seg-end 0000000104513ff0 [ 9446.469284] usb 1-2: Unable to submit urb #5: -19 at snd_usb_queue_pending_output_urbs [ 9446.960350] usb 1-2: new full-speed USB device number 17 using xhci_hcd [ 9447.074624] usb 1-2: Device not responding to setup address. [ 9447.277680] usb 1-2: Device not responding to setup address. [ 9447.485291] usb 1-2: device not accepting address 17, error -71 [ 9447.485406] usb 1-2: WARN: invalid context state for evaluate context command. [ 9448.281379] usb 1-2: new full-speed USB device number 18 using xhci_hcd [ 9448.409716] usb 1-2: New USB device found, idVendor=301a, idProduct=5627, bcdDevice= 1.00 [ 9448.409742] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 9448.409745] usb 1-2: Product: V8 [ 9448.409748] usb 1-2: Manufacturer: SmartlinkTechnology [ 9448.409751] usb 1-2: SerialNumber: ... [ 9448.414435] usb-storage 1-2:1.0: USB Mass Storage device detected [ 9448.415100] scsi host1: usb-storage 1-2:1.0 [ 9448.418311] usb 1-2: current rate 128 is different from the runtime rate 48000 [ 9448.419324] usb 1-2: current rate 128 is different from the runtime rate 48000 [ 9448.431074] hid-generic 0003:301A:5627.000C: hiddev1,hidraw2: USB HID v2.01 Device [SmartlinkTechnology V8] on usb-0000:00:15.0-2/input4 [ 9448.632965] usb 1-2: current rate 128 is different from the runtime rate 48000 [ 9448.662917] usb 1-2: current rate 128 is different from the runtime rate 48000 [ 9448.667300] usb 1-2: current rate 128 is different from the runtime rate 48000 [ 9448.674331] usb 1-2: current rate 128 is different from the runtime rate 48000 [ 9448.677443] usb 1-2: current rate 128 is different from the runtime rate 48000 [ 9448.696727] usb 1-2: current rate 128 is different from the runtime rate 48000 [ 9448.698945] usb 1-2: current rate 128 is different from the runtime rate 48000 [ 9448.703034] usb 1-2: current rate 128 is different from the runtime rate 48000 [ 9448.760136] usb 1-2: current rate 128 is different from the runtime rate 48000 [ 9448.762853] usb 1-2: current rate 128 is different from the runtime rate 48000 [ 9448.767703] usb 1-2: current rate 128 is different from the runtime rate 48000 [ 9448.778989] usb 1-2: current rate 128 is different from the runtime rate 48000 [ 9448.784760] usb 1-2: current rate 128 is different from the runtime rate 48000 [ 9449.023377] usb 1-2: current rate 128 is different from the runtime rate 48000 [ 9449.453956] scsi 1:0:0:0: Direct-Access SMTLINK COMP_AUDIO 1.10 PQ: 0 ANSI: 2 [ 9449.455037] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 9449.456167] sd 1:0:0:0: [sdb] Media removed, stopped polling [ 9449.456917] sd 1:0:0:0: [sdb] Attached SCSI removable disk [ 9477.892385] iwlwifi 0000:01:00.0: Applying debug destination EXTERNAL_DRAM [ 9477.976864] iwlwifi 0000:01:00.0: Applying debug destination EXTERNAL_DRAM [ 9477.979919] iwlwifi 0000:01:00.0: FW already configured (0) - re-configuring [ 9481.800429] wlp1s0: authenticate with XXX (local address=XXX) [ 9481.801337] wlp1s0: send auth to XXX (try 1/3) [ 9481.807118] wlp1s0: authenticated [ 9481.808028] wlp1s0: associate with XXX (try 1/3) [ 9481.824717] wlp1s0: RX AssocResp from XXX (capab=0x1531 status=0 aid=9) [ 9481.836904] wlp1s0: associated [ 9481.852431] wlp1s0: Limiting TX power to 14 (14 - 0) dBm as advertised by XXX [10286.112253] usb 1-2: current rate 128 is different from the runtime rate 48000 [10286.302886] usb 1-2: current rate 128 is different from the runtime rate 48000 [10286.413986] usb 1-2: current rate 128 is different from the runtime rate 48000 [10306.347673] usb 1-2: current rate 128 is different from the runtime rate 48000 [10306.458915] usb 1-2: current rate 128 is different from the runtime rate 48000 [11190.867788] usb 1-2: current rate 128 is different from the runtime rate 48000 [11190.981924] usb 1-2: current rate 128 is different from the runtime rate 48000 [12762.247933] usb 1-2: current rate 128 is different from the runtime rate 48000 [13603.613623] traps: file-roller[23656] general protection fault ip:7c3a7295fd1f sp:7ffd88093a30 error:0 in libgtk-3.so.0.2409.32[7c3a72683000+3ae000] [13705.166562] usb 1-2: current rate 128 is different from the runtime rate 48000 [13722.502506] usb 1-2: current rate 128 is different from the runtime rate 48000 [13773.664616] usb 1-2: USB disconnect, device number 18 [13773.667266] xhci_hcd 0000:00:15.0: ERROR Transfer event TRB DMA ptr not part of current TD ep_index 3 comp_code 1 [13773.667291] xhci_hcd 0000:00:15.0: Looking for event-dma 00000001024729f0 trb-start 0000000102472a00 trb-end 0000000102472a00 seg-start 0000000102472000 seg-end 0000000102472ff0 [13773.667297] xhci_hcd 0000:00:15.0: ERROR Transfer event TRB DMA ptr not part of current TD ep_index 3 comp_code 1 [13773.667300] xhci_hcd 0000:00:15.0: Looking for event-dma 0000000102472a00 trb-start 0000000102472a10 trb-end 0000000102472a10 seg-start 0000000102472000 seg-end 0000000102472ff0 [13773.669264] xhci_hcd 0000:00:15.0: ERROR Transfer event TRB DMA ptr not part of current TD ep_index 3 comp_code 1 [13773.669290] xhci_hcd 0000:00:15.0: Looking for event-dma 0000000102472a10 trb-start 0000000102472a20 trb-end 0000000102472a20 seg-start 0000000102472000 seg-end 0000000102472ff0 [13773.669303] xhci_hcd 0000:00:15.0: ERROR Transfer event TRB DMA ptr not part of current TD ep_index 3 comp_code 1 [13773.669307] xhci_hcd 0000:00:15.0: Looking for event-dma 0000000102472a20 trb-start 0000000102472a30 trb-end 0000000102472a30 seg-start 0000000102472000 seg-end 0000000102472ff0 [13773.669415] usb 1-2: Unable to submit urb #1: -19 at snd_usb_queue_pending_output_urbs [13773.670085] usb 1-2: cannot submit urb 0, error -19: no device [14450.957513] wlp1s0: authenticate with XXX (local address=XXX) [14450.958819] wlp1s0: send auth to XXX (try 1/3) [14450.988768] wlp1s0: send auth to XXX (try 2/3) [14451.063087] wlp1s0: send auth to XXX (try 3/3) [14451.104773] wlp1s0: authentication with XXX timed out [14524.758956] wlp1s0: authenticate with XXX (local address=XXX) [14524.759902] wlp1s0: send auth to XXX (try 1/3) [14524.766594] wlp1s0: authenticated [14524.768407] wlp1s0: associate with XXX (try 1/3) [14524.789470] wlp1s0: RX AssocResp from XXX (capab=0x1531 status=0 aid=4) [14524.793205] wlp1s0: associated [14524.889439] wlp1s0: Limiting TX power to 14 (14 - 0) dBm as advertised by XXX [14821.000456] usb 1-2: new full-speed USB device number 19 using xhci_hcd [14821.128626] usb 1-2: New USB device found, idVendor=0d8c, idProduct=0102, bcdDevice= 0.10 [14821.128659] usb 1-2: New USB device strings: Mfr=0, Product=2, SerialNumber=... [14821.128668] usb 1-2: Product: USB Sound Device [14821.137687] usb 1-2: current rate 30464 is different from the runtime rate 96000 [14821.141538] usb 1-2: Warning! Unlikely big volume range (=8065), cval->res is probably wrong. [14821.141557] usb 1-2: [9] FU [Mic Playback Volume] ch = 2, val = -6144/1921/1 [14821.142308] usb 1-2: Warning! Unlikely big volume range (=8065), cval->res is probably wrong. [14821.142321] usb 1-2: [11] FU [Line Playback Volume] ch = 2, val = -6144/1921/1 [14821.145669] usb 1-2: Warning! Unlikely big volume range (=6928), cval->res is probably wrong. [14821.145686] usb 1-2: [8] FU [Mic Capture Volume] ch = 2, val = -4096/2832/1 [14821.148181] usb 1-2: Warning! Unlikely big volume range (=6928), cval->res is probably wrong. [14821.148202] usb 1-2: [15] FU [Line Capture Volume] ch = 2, val = -4096/2832/1 [14821.149188] usb 1-2: Warning! Unlikely big volume range (=6928), cval->res is probably wrong. [14821.149198] usb 1-2: [2] FU [PCM Capture Volume] ch = 2, val = -4096/2832/1 [14821.151347] input: USB Sound Device as /devices/pci0000:00/0000:00:15.0/usb1/1-2/1-2:1.3/0003:0D8C:0102.000D/input/input19 [14821.204393] hid-generic 0003:0D8C:0102.000D: input,hidraw2: USB HID v1.00 Device [USB Sound Device ] on usb-0000:00:15.0-2/input3 [15266.583906] usb 1-2: current rate 30464 is different from the runtime rate 96000 [15266.776876] usb 1-2: current rate 30464 is different from the runtime rate 96000 [15266.912677] usb 1-2: current rate 30464 is different from the runtime rate 96000 [15319.268047] usb 1-2: current rate 30464 is different from the runtime rate 96000 [16283.526421] usb 1-2: current rate 30464 is different from the runtime rate 96000 [16481.270194] usb 1-2: current rate 30464 is different from the runtime rate 96000 [16595.353354] capability: warning: `gvfsd-admin' uses 32-bit capabilities (legacy support in use) [17947.232346] loop0: detected capacity change from 0 to 335356 [17947.447203] UDF-fs: warning (device loop0): udf_load_vrs: No anchor found [17947.447220] UDF-fs: Scanning with blocksize 512 failed [17947.447915] UDF-fs: warning (device loop0): udf_load_vrs: No anchor found [17947.447921] UDF-fs: Scanning with blocksize 1024 failed [17947.448231] UDF-fs: INFO Mounting volume '...', timestamp 2015/11/18 06:51 (1000) [18003.603391] loop1: detected capacity change from 0 to 335356 [18003.800887] UDF-fs: warning (device loop1): udf_load_vrs: No anchor found [18003.800904] UDF-fs: Scanning with blocksize 512 failed [18003.804241] UDF-fs: warning (device loop1): udf_load_vrs: No anchor found [18003.804254] UDF-fs: Scanning with blocksize 1024 failed [18003.804628] UDF-fs: INFO Mounting volume '...', timestamp 2015/11/18 06:51 (1000) [18005.098559] loop2: detected capacity change from 0 to 335356 [18005.302406] UDF-fs: warning (device loop2): udf_load_vrs: No anchor found [18005.302427] UDF-fs: Scanning with blocksize 512 failed [18005.302800] UDF-fs: warning (device loop2): udf_load_vrs: No anchor found [18005.302804] UDF-fs: Scanning with blocksize 1024 failed [18005.303197] UDF-fs: INFO Mounting volume '...', timestamp 2015/11/18 06:51 (1000) [18199.477134] loop0: detected capacity change from 0 to 335356 [18199.645851] UDF-fs: warning (device loop0): udf_load_vrs: No anchor found [18199.645870] UDF-fs: Scanning with blocksize 512 failed [18199.646999] UDF-fs: warning (device loop0): udf_load_vrs: No anchor found [18199.647012] UDF-fs: Scanning with blocksize 1024 failed [18199.648655] UDF-fs: INFO Mounting volume '...', timestamp 2015/11/18 06:51 (1000) [18979.187132] perf: interrupt took too long (12439 > 12413), lowering kernel.perf_event_max_sample_rate to 16000 [19181.516975] Non-volatile memory driver v1.3 [19182.209880] st: Version 20160209, fixed bufsize 32768, s/g segs 256