[ 0.000000] reserve setup_data: [mem 0x000000003f42b000-0x000000003f42bfff] reserved [ 0.000000] reserve setup_data: [mem 0x000000003f42c000-0x000000005afdc017] usable [ 0.000000] reserve setup_data: [mem 0x000000005afdc018-0x000000005b000a57] usable [ 0.000000] reserve setup_data: [mem 0x000000005b000a58-0x000000006197dfff] usable [ 0.000000] reserve setup_data: [mem 0x000000006197e000-0x0000000064a7dfff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000064a7e000-0x0000000064b7ffff] ACPI data [ 0.000000] reserve setup_data: [mem 0x0000000064b80000-0x0000000064cc4fff] ACPI NVS [ 0.000000] reserve setup_data: [mem 0x0000000064cc5000-0x0000000067efefff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000067eff000-0x0000000067efffff] usable [ 0.000000] reserve setup_data: [mem 0x0000000067f00000-0x000000006dffffff] reserved [ 0.000000] reserve setup_data: [mem 0x000000006e400000-0x000000006e7fffff] reserved [ 0.000000] reserve setup_data: [mem 0x000000006f000000-0x00000000743fffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000c0000000-0x00000000cfffffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fe000000-0x00000000fe010fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fed00000-0x00000000fed00fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fed20000-0x00000000fed7ffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000048bbfffff] usable [ 0.000000] efi: EFI v2.8 by American Megatrends [ 0.000000] efi: ACPI=0x64c42000 ACPI 2.0=0x64c42014 TPMFinalLog=0x64c10000 SMBIOS=0x67b80000 SMBIOS 3.0=0x67b7f000 MEMATTR=0x5e46a018 ESRT=0x5f466018 INITRD=0x5c864198 RNG=0x64ab0018 TPMEventLog=0x64aa6018 [ 0.000000] random: crng init done [ 0.000000] efi: Remove mem81: MMIO range=[0xc0000000-0xcfffffff] (256MB) from e820 map [ 0.000000] e820: remove [mem 0xc0000000-0xcfffffff] reserved [ 0.000000] efi: Not removing mem82: MMIO range=[0xfe000000-0xfe010fff] (68KB) from e820 map [ 0.000000] efi: Not removing mem83: MMIO range=[0xfec00000-0xfec00fff] (4KB) from e820 map [ 0.000000] efi: Not removing mem84: MMIO range=[0xfed00000-0xfed00fff] (4KB) from e820 map [ 0.000000] efi: Not removing mem86: MMIO range=[0xfee00000-0xfee00fff] (4KB) from e820 map [ 0.000000] efi: Remove mem87: MMIO range=[0xff000000-0xffffffff] (16MB) from e820 map [ 0.000000] e820: remove [mem 0xff000000-0xffffffff] reserved [ 0.000000] SMBIOS 3.5.0 present. [ 0.000000] DMI: Micro-Star International Co., Ltd. Katana 17 B13VGK/MS-17L5, BIOS E17L5IMS.11B 03/18/2025 [ 0.000000] DMI: Memory slots populated: 2/2 [ 0.000000] tsc: Detected 2900.000 MHz processor [ 0.000000] tsc: Detected 2918.400 MHz TSC [ 0.001216] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.001217] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.001223] last_pfn = 0x48bc00 max_arch_pfn = 0x400000000 [ 0.001226] MTRR map: 5 entries (3 fixed + 2 variable; max 23), built from 10 variable MTRRs [ 0.001227] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.001535] last_pfn = 0x67f00 max_arch_pfn = 0x400000000 [ 0.012711] esrt: Reserving ESRT space from 0x000000005f466018 to 0x000000005f4660c8. [ 0.012715] e820: update [mem 0x5f466000-0x5f466fff] usable ==> reserved [ 0.012726] Using GB pages for direct mapping [ 0.012726] Incomplete global flushes, disabling PCID [ 0.013026] Secure boot disabled [ 0.013026] RAMDISK: [mem 0x4f9c3000-0x552b1fff] [ 0.013029] ACPI: Early table checksum verification disabled [ 0.013031] ACPI: RSDP 0x0000000064C42014 000024 (v02 MSI_NB) [ 0.013033] ACPI: XSDT 0x0000000064C41728 00013C (v01 MSI_NB MEGABOOK 01072009 AMI 01000013) [ 0.013036] ACPI: FACP 0x0000000064B78000 000114 (v06 MSI_NB MEGABOOK 01072009 AMI 01000013) [ 0.013039] ACPI: DSDT 0x0000000064AEB000 08CB72 (v02 MSI_NB MEGABOOK 01072009 INTL 20200717) [ 0.013040] ACPI: FACS 0x0000000064CC4000 000040 [ 0.013042] ACPI: SSDT 0x0000000064B79000 004BAF (v02 DptfTb DptfTabl 00001000 INTL 20200717) [ 0.013043] ACPI: FIDT 0x0000000064AEA000 00009C (v01 MSI_NB MEGABOOK 01072009 AMI 00010013) [ 0.013044] ACPI: SLIC 0x0000000064B7F000 000176 (v01 MSI_NB MEGABOOK 01072009 AMI 01000013) [ 0.013045] ACPI: SSDT 0x0000000064B7E000 00038C (v02 PmaxDv Pmax_Dev 00000001 INTL 20200717) [ 0.013047] ACPI: SSDT 0x0000000064AE9000 00005C (v02 MSI_NB MsiNvs 00003000 INTL 20200717) [ 0.013048] ACPI: SSDT 0x0000000064AE3000 005D34 (v02 CpuRef CpuSsdt 00003000 INTL 20200717) [ 0.013049] ACPI: SSDT 0x0000000064AE0000 002935 (v02 SaSsdt SaSsdt 00003000 INTL 20200717) [ 0.013050] ACPI: SSDT 0x0000000064ADC000 0033E9 (v02 INTEL IgfxSsdt 00003000 INTL 20200717) [ 0.013051] ACPI: HPET 0x0000000064ADB000 000038 (v01 MSI_NB MEGABOOK 01072009 AMI 01000013) [ 0.013052] ACPI: APIC 0x0000000064ADA000 0001DC (v05 MSI_NB MEGABOOK 01072009 AMI 01000013) [ 0.013053] ACPI: MCFG 0x0000000064AD9000 00003C (v01 MSI_NB MEGABOOK 01072009 AMI 01000013) [ 0.013055] ACPI: SSDT 0x0000000064AD1000 00795B (v02 MSI_NB AdlP_Rvp 00001000 INTL 20200717) [ 0.013056] ACPI: UEFI 0x0000000064BF6000 000048 (v01 MSI_NB MEGABOOK 01072009 AMI 01000013) [ 0.013057] ACPI: LPIT 0x0000000064AD0000 0000CC (v01 MSI_NB MEGABOOK 01072009 AMI 01000013) [ 0.013058] ACPI: SSDT 0x0000000064ACC000 002A83 (v02 MSI_NB PtidDevc 00001000 INTL 20200717) [ 0.013059] ACPI: SSDT 0x0000000064AC9000 002357 (v02 MSI_NB TbtTypeC 00000000 INTL 20200717) [ 0.013060] ACPI: DBGP 0x0000000064AC8000 000034 (v01 MSI_NB MEGABOOK 01072009 AMI 01000013) [ 0.013061] ACPI: DBG2 0x0000000064AC7000 000054 (v00 MSI_NB MEGABOOK 01072009 AMI 01000013) [ 0.013062] ACPI: NHLT 0x0000000064AC6000 000F0E (v00 MSI_NB MEGABOOK 01072009 AMI 01000013) [ 0.013064] ACPI: DMAR 0x0000000064AC5000 000088 (v02 INTEL EDK2 00000002 01000013) [ 0.013065] ACPI: FPDT 0x0000000064AC4000 000044 (v01 MSI_NB A M I 01072009 AMI 01000013) [ 0.013066] ACPI: SSDT 0x0000000064AC3000 000727 (v02 INTEL xh_adlLP 00000000 INTL 20200717) [ 0.013067] ACPI: SSDT 0x0000000064ABF000 003AEA (v02 SocGpe SocGpe 00003000 INTL 20200717) [ 0.013068] ACPI: SSDT 0x0000000064ABB000 0039DA (v02 SocCmn SocCmn 00003000 INTL 20200717) [ 0.013070] ACPI: SSDT 0x0000000064ABA000 00004B (v02 MSI_NB Free_DOS 00003000 INTL 20200717) [ 0.013071] ACPI: SSDT 0x0000000064AB9000 000144 (v02 Intel ADebTabl 00001000 INTL 20200717) [ 0.013072] ACPI: BGRT 0x0000000064AB8000 000038 (v01 MSI_NB MEGABOOK 01072009 AMI 00010013) [ 0.013073] ACPI: UEFI 0x0000000064BF3000 00063A (v01 INTEL RstVmdE 00000000 INTL 00000000) [ 0.013074] ACPI: UEFI 0x0000000064BF2000 00005C (v01 INTEL RstVmdV 00000000 INTL 00000000) [ 0.013075] ACPI: TPM2 0x0000000064AB7000 00004C (v04 MSI_NB MEGABOOK 00000001 AMI 00000000) [ 0.013076] ACPI: SSDT 0x0000000064AB3000 0030F1 (v01 OptRf2 Opt2Tabl 00001000 INTL 20200717) [ 0.013078] ACPI: PHAT 0x0000000064AB2000 000591 (v01 MSI_NB MEGABOOK 00000005 MSFT 0100000D) [ 0.013079] ACPI: WSMT 0x0000000064ACF000 000028 (v01 MSI_NB MEGABOOK 01072009 AMI 00010013) [ 0.013080] ACPI: BGRT 0x0000000064AB1000 000038 (v01 MSI_NB MEGABOOK 01072009 AMI 00010013) [ 0.013081] ACPI: Reserving FACP table memory at [mem 0x64b78000-0x64b78113] [ 0.013081] ACPI: Reserving DSDT table memory at [mem 0x64aeb000-0x64b77b71] [ 0.013082] ACPI: Reserving FACS table memory at [mem 0x64cc4000-0x64cc403f] [ 0.013082] ACPI: Reserving SSDT table memory at [mem 0x64b79000-0x64b7dbae] [ 0.013082] ACPI: Reserving FIDT table memory at [mem 0x64aea000-0x64aea09b] [ 0.013083] ACPI: Reserving SLIC table memory at [mem 0x64b7f000-0x64b7f175] [ 0.013083] ACPI: Reserving SSDT table memory at [mem 0x64b7e000-0x64b7e38b] [ 0.013083] ACPI: Reserving SSDT table memory at [mem 0x64ae9000-0x64ae905b] [ 0.013084] ACPI: Reserving SSDT table memory at [mem 0x64ae3000-0x64ae8d33] [ 0.013084] ACPI: Reserving SSDT table memory at [mem 0x64ae0000-0x64ae2934] [ 0.013084] ACPI: Reserving SSDT table memory at [mem 0x64adc000-0x64adf3e8] [ 0.013085] ACPI: Reserving HPET table memory at [mem 0x64adb000-0x64adb037] [ 0.013085] ACPI: Reserving APIC table memory at [mem 0x64ada000-0x64ada1db] [ 0.013085] ACPI: Reserving MCFG table memory at [mem 0x64ad9000-0x64ad903b] [ 0.013085] ACPI: Reserving SSDT table memory at [mem 0x64ad1000-0x64ad895a] [ 0.013086] ACPI: Reserving UEFI table memory at [mem 0x64bf6000-0x64bf6047] [ 0.013086] ACPI: Reserving LPIT table memory at [mem 0x64ad0000-0x64ad00cb] [ 0.013086] ACPI: Reserving SSDT table memory at [mem 0x64acc000-0x64acea82] [ 0.013087] ACPI: Reserving SSDT table memory at [mem 0x64ac9000-0x64acb356] [ 0.013087] ACPI: Reserving DBGP table memory at [mem 0x64ac8000-0x64ac8033] [ 0.013087] ACPI: Reserving DBG2 table memory at [mem 0x64ac7000-0x64ac7053] [ 0.013087] ACPI: Reserving NHLT table memory at [mem 0x64ac6000-0x64ac6f0d] [ 0.013088] ACPI: Reserving DMAR table memory at [mem 0x64ac5000-0x64ac5087] [ 0.013088] ACPI: Reserving FPDT table memory at [mem 0x64ac4000-0x64ac4043] [ 0.013088] ACPI: Reserving SSDT table memory at [mem 0x64ac3000-0x64ac3726] [ 0.013089] ACPI: Reserving SSDT table memory at [mem 0x64abf000-0x64ac2ae9] [ 0.013089] ACPI: Reserving SSDT table memory at [mem 0x64abb000-0x64abe9d9] [ 0.013089] ACPI: Reserving SSDT table memory at [mem 0x64aba000-0x64aba04a] [ 0.013090] ACPI: Reserving SSDT table memory at [mem 0x64ab9000-0x64ab9143] [ 0.013090] ACPI: Reserving BGRT table memory at [mem 0x64ab8000-0x64ab8037] [ 0.013090] ACPI: Reserving UEFI table memory at [mem 0x64bf3000-0x64bf3639] [ 0.013090] ACPI: Reserving UEFI table memory at [mem 0x64bf2000-0x64bf205b] [ 0.013091] ACPI: Reserving TPM2 table memory at [mem 0x64ab7000-0x64ab704b] [ 0.013091] ACPI: Reserving SSDT table memory at [mem 0x64ab3000-0x64ab60f0] [ 0.013091] ACPI: Reserving PHAT table memory at [mem 0x64ab2000-0x64ab2590] [ 0.013092] ACPI: Reserving WSMT table memory at [mem 0x64acf000-0x64acf027] [ 0.013092] ACPI: Reserving BGRT table memory at [mem 0x64ab1000-0x64ab1037] [ 0.013247] No NUMA configuration found [ 0.013247] Faking a node at [mem 0x0000000000000000-0x000000048bbfffff] [ 0.013251] NODE_DATA(0) allocated [mem 0x48bbd52c0-0x48bbfffff] [ 0.013323] Zone ranges: [ 0.013323] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.013324] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.013325] Normal [mem 0x0000000100000000-0x000000048bbfffff] [ 0.013326] Device empty [ 0.013326] Movable zone start for each node [ 0.013327] Early memory node ranges [ 0.013327] node 0: [mem 0x0000000000001000-0x000000000009dfff] [ 0.013328] node 0: [mem 0x000000000009f000-0x000000000009ffff] [ 0.013328] node 0: [mem 0x0000000000100000-0x000000003eb92fff] [ 0.013328] node 0: [mem 0x000000003eb94000-0x000000003f42afff] [ 0.013329] node 0: [mem 0x000000003f42c000-0x000000006197dfff] [ 0.013329] node 0: [mem 0x0000000067eff000-0x0000000067efffff] [ 0.013330] node 0: [mem 0x0000000100000000-0x000000048bbfffff] [ 0.013330] Initmem setup node 0 [mem 0x0000000000001000-0x000000048bbfffff] [ 0.013333] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.013334] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.013350] On node 0, zone DMA: 96 pages in unavailable ranges [ 0.014397] On node 0, zone DMA32: 1 pages in unavailable ranges [ 0.014948] On node 0, zone DMA32: 1 pages in unavailable ranges [ 0.015076] On node 0, zone DMA32: 25985 pages in unavailable ranges [ 0.029659] On node 0, zone Normal: 256 pages in unavailable ranges [ 0.029749] On node 0, zone Normal: 17408 pages in unavailable ranges [ 0.029788] Reserving Intel graphics memory at [mem 0x70800000-0x743fffff] [ 0.030056] ACPI: PM-Timer IO Port: 0x1808 [ 0.030063] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.030064] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.030064] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.030064] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) [ 0.030065] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1]) [ 0.030065] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1]) [ 0.030065] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1]) [ 0.030065] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1]) [ 0.030066] ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1]) [ 0.030066] ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1]) [ 0.030066] ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1]) [ 0.030067] ACPI: LAPIC_NMI (acpi_id[0x0c] high edge lint[0x1]) [ 0.030067] ACPI: LAPIC_NMI (acpi_id[0x0d] high edge lint[0x1]) [ 0.030067] ACPI: LAPIC_NMI (acpi_id[0x0e] high edge lint[0x1]) [ 0.030067] ACPI: LAPIC_NMI (acpi_id[0x0f] high edge lint[0x1]) [ 0.030068] ACPI: LAPIC_NMI (acpi_id[0x10] high edge lint[0x1]) [ 0.030068] ACPI: LAPIC_NMI (acpi_id[0x11] high edge lint[0x1]) [ 0.030068] ACPI: LAPIC_NMI (acpi_id[0x12] high edge lint[0x1]) [ 0.030069] ACPI: LAPIC_NMI (acpi_id[0x13] high edge lint[0x1]) [ 0.030069] ACPI: LAPIC_NMI (acpi_id[0x14] high edge lint[0x1]) [ 0.030069] ACPI: LAPIC_NMI (acpi_id[0x15] high edge lint[0x1]) [ 0.030070] ACPI: LAPIC_NMI (acpi_id[0x16] high edge lint[0x1]) [ 0.030070] ACPI: LAPIC_NMI (acpi_id[0x17] high edge lint[0x1]) [ 0.030070] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.030105] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119 [ 0.030106] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.030108] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.030112] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.030112] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.030119] e820: update [mem 0x5b499000-0x5b58cfff] usable ==> reserved [ 0.030127] TSC deadline timer available [ 0.030128] CPU topo: Max. logical packages: 1 [ 0.030128] CPU topo: Max. logical dies: 1 [ 0.030129] CPU topo: Max. dies per package: 1 [ 0.030132] CPU topo: Max. threads per core: 2 [ 0.030132] CPU topo: Num. cores per package: 10 [ 0.030133] CPU topo: Num. threads per package: 16 [ 0.030133] CPU topo: Allowing 16 present CPUs plus 0 hotplug CPUs [ 0.030143] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.030144] PM: hibernation: Registered nosave memory: [mem 0x0009e000-0x0009efff] [ 0.030145] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000fffff] [ 0.030146] PM: hibernation: Registered nosave memory: [mem 0x3eb93000-0x3eb93fff] [ 0.030146] PM: hibernation: Registered nosave memory: [mem 0x3f42b000-0x3f42bfff] [ 0.030147] PM: hibernation: Registered nosave memory: [mem 0x5b499000-0x5b58cfff] [ 0.030148] PM: hibernation: Registered nosave memory: [mem 0x5f466000-0x5f466fff] [ 0.030148] PM: hibernation: Registered nosave memory: [mem 0x6197e000-0x67efefff] [ 0.030149] PM: hibernation: Registered nosave memory: [mem 0x67f00000-0xffffffff] [ 0.030150] [mem 0x74400000-0xfdffffff] available for PCI devices [ 0.030150] Booting paravirtualized kernel on bare hardware [ 0.030152] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns [ 0.034151] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:16 nr_cpu_ids:16 nr_node_ids:1 [ 0.034853] percpu: Embedded 67 pages/cpu s237568 r8192 d28672 u524288 [ 0.034856] pcpu-alloc: s237568 r8192 d28672 u524288 alloc=1*2097152 [ 0.034858] pcpu-alloc: [0] 00 01 02 03 [0] 04 05 06 07 [ 0.034860] pcpu-alloc: [0] 08 09 10 11 [0] 12 13 14 15 [ 0.034869] Kernel command line: BOOT_IMAGE=/@/boot/kernel-6.12.31-gentoo root=UUID=HASH_92B-0C68-26FC-7E76-01BAF745C85A ro rootflags=subvol=@ [ 0.034894] Unknown kernel command line parameters "BOOT_IMAGE=/@/boot/kernel-6.12.31-gentoo", will be passed to user space. [ 0.035959] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear) [ 0.036498] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.036594] Fallback order for Node 0: 0 [ 0.036596] Built 1 zonelists, mobility grouping on. Total pages: 4117787 [ 0.036597] Policy zone: Normal [ 0.036746] mem auto-init: stack:all(zero), heap alloc:on, heap free:off [ 0.036753] software IO TLB: area num 16. [ 0.067916] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1 [ 0.067948] ftrace: allocating 51098 entries in 200 pages [ 0.068057] ftrace: allocated 200 pages with 3 groups [ 0.068108] Dynamic Preempt: full [ 0.068150] rcu: Preemptible hierarchical RCU implementation. [ 0.068150] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=16. [ 0.068151] rcu: RCU priority boosting: priority 1 delay 500 ms. [ 0.068151] Trampoline variant of Tasks RCU enabled. [ 0.068151] Rude variant of Tasks RCU enabled. [ 0.068152] Tracing variant of Tasks RCU enabled. [ 0.068152] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies. [ 0.068152] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=16 [ 0.068159] RCU Tasks: Setting shift to 4 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=16. [ 0.068160] RCU Tasks Rude: Setting shift to 4 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=16. [ 0.068161] RCU Tasks Trace: Setting shift to 4 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=16. [ 0.069835] NR_IRQS: 524544, nr_irqs: 2184, preallocated irqs: 16 [ 0.070116] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.070324] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____) [ 0.070345] Console: colour dummy device 80x25 [ 0.070347] printk: legacy console [tty0] enabled [ 0.070375] ACPI: Core revision 20240827 [ 0.070604] hpet: HPET dysfunctional in PC10. Force disabled. [ 0.070694] APIC: Switch to symmetric I/O mode setup [ 0.070695] DMAR: Host address width 39 [ 0.070696] DMAR: DRHD base: 0x000000fed90000 flags: 0x0 [ 0.070699] DMAR: dmar0: reg_base_addr fed90000 ver 4:0 cap 1c0000c40660462 ecap 29a00f0505e [ 0.070701] DMAR: DRHD base: 0x000000fed91000 flags: 0x1 [ 0.070704] DMAR: dmar1: reg_base_addr fed91000 ver 5:0 cap d2008c40660462 ecap f050da [ 0.070706] DMAR: RMRR base: 0x00000070000000 end: 0x000000743fffff [ 0.070707] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1 [ 0.070708] DMAR-IR: HPET id 0 under DRHD base 0xfed91000 [ 0.070709] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. [ 0.072251] DMAR-IR: Enabled IRQ remapping in x2apic mode [ 0.072252] x2apic enabled [ 0.072298] APIC: Switched APIC routing to: cluster x2apic [ 0.076761] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2a11290c0c8, max_idle_ns: 440795344938 ns [ 0.076765] Calibrating delay loop (skipped), value calculated using timer frequency.. 5839.00 BogoMIPS (lpj=9728000) [ 0.076808] CPU0: Thermal monitoring enabled (TM1) [ 0.076810] x86/cpu: User Mode Instruction Prevention (UMIP) activated [ 0.076919] CET detected: Indirect Branch Tracking enabled [ 0.076920] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 [ 0.076920] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 [ 0.076923] process: using mwait in idle threads [ 0.076924] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.076926] Spectre V2 : Mitigation: Enhanced / Automatic IBRS [ 0.076926] Spectre V2 : Spectre v2 / PBRSB-eIBRS: Retire a single CALL on VMEXIT [ 0.076927] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.076928] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl [ 0.076929] Register File Data Sampling: Vulnerable: No microcode [ 0.076936] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.076936] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.076937] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.076937] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers' [ 0.076938] x86/fpu: Supporting XSAVE feature 0x800: 'Control-flow User registers' [ 0.076938] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.076939] x86/fpu: xstate_offset[9]: 832, xstate_sizes[9]: 8 [ 0.076940] x86/fpu: xstate_offset[11]: 840, xstate_sizes[11]: 16 [ 0.076940] x86/fpu: Enabled xstate features 0xa07, context size is 856 bytes, using 'compacted' format. [ 0.080097] Freeing SMP alternatives memory: 48K [ 0.080097] pid_max: default: 32768 minimum: 301 [ 0.080097] LSM: initializing lsm=capability,landlock,lockdown,yama,bpf [ 0.080097] landlock: Up and running. [ 0.080097] Yama: becoming mindful. [ 0.080097] LSM support for eBPF active [ 0.080097] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.080097] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.080097] smpboot: CPU0: 13th Gen Intel(R) Core(TM) i7-13620H (family: 0x6, model: 0xba, stepping: 0x2) [ 0.080097] Performance Events: XSAVE Architectural LBR, PEBS fmt4+-baseline, AnyThread deprecated, Alderlake Hybrid events, 32-deep LBR, full-width counters, Intel PMU driver. [ 0.080097] core: cpu_core PMU driver: [ 0.080097] ... version: 5 [ 0.080097] ... bit width: 48 [ 0.080097] ... generic registers: 8 [ 0.080097] ... value mask: 0000ffffffffffff [ 0.080097] ... max period: 00007fffffffffff [ 0.080097] ... fixed-purpose events: 4 [ 0.080097] ... event mask: 0001000f000000ff [ 0.080097] signal: max sigframe size: 3632 [ 0.080097] Estimated ratio of average max frequency by base frequency (times 1024): 1659 [ 0.080097] rcu: Hierarchical SRCU implementation. [ 0.080097] rcu: Max phase no-delay instances is 1000. [ 0.080097] Timer migration: 2 hierarchy levels; 8 children per group; 2 crossnode level [ 0.080097] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.080097] smp: Bringing up secondary CPUs ... [ 0.080097] smpboot: x86: Booting SMP configuration: [ 0.080097] .... node #0, CPUs: #2 #4 #6 #8 #10 #12 #13 #14 #15 [ 0.009836] core: cpu_atom PMU driver: [ 0.009836] ... version: 5 [ 0.009836] ... bit width: 48 [ 0.009836] ... generic registers: 6 [ 0.009836] ... value mask: 0000ffffffffffff [ 0.009836] ... max period: 00007fffffffffff [ 0.009836] ... fixed-purpose events: 3 [ 0.009836] ... event mask: 000000070000003f [ 0.080748] #1 #3 #5 #7 #9 #11 [ 0.084539] smp: Brought up 1 node, 16 CPUs [ 0.084539] smpboot: Total of 16 processors activated (93426.00 BogoMIPS) [ 0.086837] Memory: 15944184K/16471148K available (18432K kernel code, 2585K rwdata, 14292K rodata, 4172K init, 4296K bss, 499964K reserved, 0K cma-reserved) [ 0.087157] devtmpfs: initialized [ 0.087157] x86/mm: Memory block size: 128MB [ 0.087405] ACPI: PM: Registering ACPI NVS region [mem 0x64b80000-0x64cc4fff] (1331200 bytes) [ 0.087405] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns [ 0.087405] futex hash table entries: 4096 (order: 6, 262144 bytes, linear) [ 0.087405] pinctrl core: initialized pinctrl subsystem [ 0.087405] PM: RTC time: 09:12:09, date: 2025-07-16 [ 0.087405] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.087477] DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations [ 0.087589] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.087698] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.087706] thermal_sys: Registered thermal governor 'fair_share' [ 0.087706] thermal_sys: Registered thermal governor 'bang_bang' [ 0.087706] thermal_sys: Registered thermal governor 'step_wise' [ 0.087706] thermal_sys: Registered thermal governor 'user_space' [ 0.087706] thermal_sys: Registered thermal governor 'power_allocator' [ 0.087706] cpuidle: using governor ladder [ 0.087706] cpuidle: using governor menu [ 0.087706] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.087706] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.087706] PCI: ECAM [mem 0xc0000000-0xce0fffff] (base 0xc0000000) for domain 0000 [bus 00-e0] [ 0.087706] PCI: Using configuration type 1 for base access [ 0.087706] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.093534] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages [ 0.093534] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page [ 0.093534] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages [ 0.093534] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page [ 0.093806] ACPI: Added _OSI(Module Device) [ 0.093806] ACPI: Added _OSI(Processor Device) [ 0.093806] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.093806] ACPI: Added _OSI(Processor Aggregator Device) [ 0.175469] ACPI: 16 ACPI AML tables successfully acquired and loaded [ 0.189663] ACPI: Dynamic OEM Table Load: [ 0.189671] ACPI: SSDT 0xFFFF8931C1712800 000394 (v02 PmRef Cpu0Cst 00003001 INTL 20200717) [ 0.190724] ACPI: Dynamic OEM Table Load: [ 0.190730] ACPI: SSDT 0xFFFF8931C170E800 000668 (v02 PmRef Cpu0Ist 00003000 INTL 20200717) [ 0.191812] ACPI: Dynamic OEM Table Load: [ 0.191817] ACPI: SSDT 0xFFFF8931C294EE00 0001AB (v02 PmRef Cpu0Psd 00003000 INTL 20200717) [ 0.192814] ACPI: Dynamic OEM Table Load: [ 0.192819] ACPI: SSDT 0xFFFF8931C170B800 0004B5 (v02 PmRef Cpu0Hwp 00003000 INTL 20200717) [ 0.194219] ACPI: Dynamic OEM Table Load: [ 0.194225] ACPI: SSDT 0xFFFF8931C1702000 001BAF (v02 PmRef ApIst 00003000 INTL 20200717) [ 0.195899] ACPI: Dynamic OEM Table Load: [ 0.195904] ACPI: SSDT 0xFFFF8931C1706000 001038 (v02 PmRef ApHwp 00003000 INTL 20200717) [ 0.197383] ACPI: Dynamic OEM Table Load: [ 0.197389] ACPI: SSDT 0xFFFF8931C1704000 001349 (v02 PmRef ApPsd 00003000 INTL 20200717) [ 0.198911] ACPI: Dynamic OEM Table Load: [ 0.198915] ACPI: SSDT 0xFFFF8931C171F000 000FBB (v02 PmRef ApCst 00003000 INTL 20200717) [ 0.205939] ACPI: EC: EC started [ 0.205940] ACPI: EC: interrupt blocked [ 0.214927] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.214929] ACPI: \_SB_.PC00.LPCB.EC__: Boot DSDT EC used to handle transactions [ 0.214931] ACPI: Interpreter enabled [ 0.214983] ACPI: PM: (supports S0 S3 S4 S5) [ 0.214984] ACPI: Using IOAPIC for interrupt routing [ 0.216223] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.216224] PCI: Ignoring E820 reservations for host bridge windows [ 0.217268] ACPI: Enabled 10 GPEs in block 00 to 7F [ 0.220944] ACPI: \_SB_.PC00.PEG1.PXP_: New power resource [ 0.235384] ACPI: \_SB_.PC00.XHCI.RHUB.HS10.BTRT: New power resource [ 0.236036] ACPI: \_SB_.PC00.PAUD: New power resource [ 0.236970] ACPI: \_SB_.PC00.I2C0.PXTC: New power resource [ 0.245493] ACPI: \_SB_.PC00.CNVW.WRST: New power resource [ 0.252614] ACPI: \PIN_: New power resource [ 0.253125] ACPI: PCI Root Bridge [PC00] (domain 0000 [bus 00-e0]) [ 0.253129] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3] [ 0.254895] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR DPC] [ 0.254896] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.256244] PCI host bridge to bus 0000:00 [ 0.256246] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.256248] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.256249] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.256250] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000fffff window] [ 0.256251] pci_bus 0000:00: root bus resource [mem 0x74400000-0xbfffffff window] [ 0.256252] pci_bus 0000:00: root bus resource [mem 0x4000000000-0x7fffffffff window] [ 0.256253] pci_bus 0000:00: root bus resource [bus 00-e0] [ 0.256282] pci 0000:00:00.0: [8086:a715] type 00 class 0x060000 conventional PCI endpoint [ 0.256399] pci 0000:00:01.0: [8086:a70d] type 01 class 0x060400 PCIe Root Port [ 0.256413] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.256415] pci 0000:00:01.0: bridge window [io 0x4000-0x4fff] [ 0.256417] pci 0000:00:01.0: bridge window [mem 0x78000000-0x790fffff] [ 0.256422] pci 0000:00:01.0: bridge window [mem 0x6000000000-0x6201ffffff 64bit pref] [ 0.256462] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.256481] pci 0000:00:01.0: PTM enabled (root), 4ns granularity [ 0.257013] pci 0000:00:02.0: [8086:a7a8] type 00 class 0x030000 PCIe Root Complex Integrated Endpoint [ 0.257020] pci 0000:00:02.0: BAR 0 [mem 0x6204000000-0x6204ffffff 64bit] [ 0.257024] pci 0000:00:02.0: BAR 2 [mem 0x4000000000-0x400fffffff 64bit pref] [ 0.257027] pci 0000:00:02.0: BAR 4 [io 0x5000-0x503f] [ 0.257039] pci 0000:00:02.0: DMAR: Skip IOMMU disabling for graphics [ 0.257041] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.257060] pci 0000:00:02.0: VF BAR 0 [mem 0x00000000-0x00ffffff 64bit] [ 0.257062] pci 0000:00:02.0: VF BAR 0 [mem 0x00000000-0x06ffffff 64bit]: contains BAR 0 for 7 VFs [ 0.257065] pci 0000:00:02.0: VF BAR 2 [mem 0x00000000-0x1fffffff 64bit pref] [ 0.257066] pci 0000:00:02.0: VF BAR 2 [mem 0x00000000-0xdfffffff 64bit pref]: contains BAR 2 for 7 VFs [ 0.257198] pci 0000:00:04.0: [8086:a71d] type 00 class 0x118000 conventional PCI endpoint [ 0.257210] pci 0000:00:04.0: BAR 0 [mem 0x6205200000-0x620521ffff 64bit] [ 0.257478] pci 0000:00:06.0: [8086:09ab] type 00 class 0x088000 conventional PCI endpoint [ 0.258034] pci 0000:00:08.0: [8086:a74f] type 00 class 0x088000 conventional PCI endpoint [ 0.258041] pci 0000:00:08.0: BAR 0 [mem 0x6205240000-0x6205240fff 64bit] [ 0.258145] pci 0000:00:0e.0: [8086:a77f] type 00 class 0x010400 PCIe Root Complex Integrated Endpoint [ 0.258157] pci 0000:00:0e.0: BAR 0 [mem 0x6202000000-0x6203ffffff 64bit] [ 0.258163] pci 0000:00:0e.0: BAR 2 [mem 0x76000000-0x77ffffff] [ 0.258176] pci 0000:00:0e.0: BAR 4 [mem 0x6205100000-0x62051fffff 64bit] [ 0.258413] pci 0000:00:14.0: [8086:51ed] type 00 class 0x0c0330 conventional PCI endpoint [ 0.258433] pci 0000:00:14.0: BAR 0 [mem 0x6205220000-0x620522ffff 64bit] [ 0.258516] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.260811] pci 0000:00:14.2: [8086:51ef] type 00 class 0x050000 conventional PCI endpoint [ 0.260831] pci 0000:00:14.2: BAR 0 [mem 0x6205238000-0x620523bfff 64bit] [ 0.260844] pci 0000:00:14.2: BAR 2 [mem 0x620523f000-0x620523ffff 64bit] [ 0.261139] pci 0000:00:14.3: [8086:51f1] type 00 class 0x028000 PCIe Root Complex Integrated Endpoint [ 0.261160] pci 0000:00:14.3: BAR 0 [mem 0x6205234000-0x6205237fff 64bit] [ 0.261360] pci 0000:00:14.3: PME# supported from D0 D3hot D3cold [ 0.261897] pci 0000:00:15.0: [8086:51e8] type 00 class 0x0c8000 conventional PCI endpoint [ 0.261963] pci 0000:00:15.0: BAR 0 [mem 0x00000000-0x00000fff 64bit] [ 0.262358] pci 0000:00:16.0: [8086:51e0] type 00 class 0x078000 conventional PCI endpoint [ 0.262381] pci 0000:00:16.0: BAR 0 [mem 0x620523d000-0x620523dfff 64bit] [ 0.262465] pci 0000:00:16.0: PME# supported from D3hot [ 0.263047] pci 0000:00:1c.0: [8086:51b8] type 01 class 0x060400 PCIe Root Port [ 0.263076] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.263152] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.263740] pci 0000:00:1c.5: [8086:51bd] type 01 class 0x060400 PCIe Root Port [ 0.263766] pci 0000:00:1c.5: PCI bridge to [bus 03] [ 0.263769] pci 0000:00:1c.5: bridge window [io 0x3000-0x3fff] [ 0.263772] pci 0000:00:1c.5: bridge window [mem 0x79200000-0x792fffff] [ 0.263845] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold [ 0.263876] pci 0000:00:1c.5: PTM enabled (root), 4ns granularity [ 0.264455] pci 0000:00:1f.0: [8086:519d] type 00 class 0x060100 conventional PCI endpoint [ 0.264804] pci 0000:00:1f.3: [8086:51ca] type 00 class 0x040100 conventional PCI endpoint [ 0.264845] pci 0000:00:1f.3: BAR 0 [mem 0x6205230000-0x6205233fff 64bit] [ 0.264898] pci 0000:00:1f.3: BAR 4 [mem 0x6205000000-0x62050fffff 64bit] [ 0.265002] pci 0000:00:1f.3: PME# supported from D3hot D3cold [ 0.265087] pci 0000:00:1f.4: [8086:51a3] type 00 class 0x0c0500 conventional PCI endpoint [ 0.265111] pci 0000:00:1f.4: BAR 0 [mem 0x620523c000-0x620523c0ff 64bit] [ 0.265139] pci 0000:00:1f.4: BAR 4 [io 0xefa0-0xefbf] [ 0.265389] pci 0000:00:1f.5: [8086:51a4] type 00 class 0x0c8000 conventional PCI endpoint [ 0.265408] pci 0000:00:1f.5: BAR 0 [mem 0xfe010000-0xfe010fff] [ 0.265544] pci 0000:01:00.0: [10de:2820] type 00 class 0x030000 PCIe Legacy Endpoint [ 0.265552] pci 0000:01:00.0: BAR 0 [mem 0x78000000-0x78ffffff] [ 0.265558] pci 0000:01:00.0: BAR 1 [mem 0x6000000000-0x61ffffffff 64bit pref] [ 0.265565] pci 0000:01:00.0: BAR 3 [mem 0x6200000000-0x6201ffffff 64bit pref] [ 0.265568] pci 0000:01:00.0: BAR 5 [io 0x4000-0x407f] [ 0.265572] pci 0000:01:00.0: ROM [mem 0x79000000-0x7907ffff pref] [ 0.265618] pci 0000:01:00.0: PME# supported from D0 D3hot [ 0.265907] pci 0000:01:00.1: [10de:22bd] type 00 class 0x040300 PCIe Endpoint [ 0.265915] pci 0000:01:00.1: BAR 0 [mem 0x79080000-0x79083fff] [ 0.266023] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.266080] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.266147] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000 PCIe Endpoint [ 0.266169] pci 0000:03:00.0: BAR 0 [io 0x3000-0x30ff] [ 0.266198] pci 0000:03:00.0: BAR 2 [mem 0x79204000-0x79204fff 64bit] [ 0.266217] pci 0000:03:00.0: BAR 4 [mem 0x79200000-0x79203fff 64bit] [ 0.266340] pci 0000:03:00.0: supports D1 D2 [ 0.266341] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.266586] pci 0000:00:1c.5: PCI bridge to [bus 03] [ 0.270350] ACPI: PCI: Interrupt link LNKA configured for IRQ 0 [ 0.270452] ACPI: PCI: Interrupt link LNKB configured for IRQ 1 [ 0.270552] ACPI: PCI: Interrupt link LNKC configured for IRQ 0 [ 0.270652] ACPI: PCI: Interrupt link LNKD configured for IRQ 0 [ 0.270751] ACPI: PCI: Interrupt link LNKE configured for IRQ 0 [ 0.270851] ACPI: PCI: Interrupt link LNKF configured for IRQ 0 [ 0.270951] ACPI: PCI: Interrupt link LNKG configured for IRQ 0 [ 0.271051] ACPI: PCI: Interrupt link LNKH configured for IRQ 0 [ 0.593236] Low-power S0 idle used by default for system suspend [ 0.593749] ACPI: EC: interrupt unblocked [ 0.593749] ACPI: EC: event unblocked [ 0.593777] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.593777] ACPI: EC: GPE=0x6e [ 0.593778] ACPI: \_SB_.PC00.LPCB.EC__: Boot DSDT EC initialization complete [ 0.593779] ACPI: \_SB_.PC00.LPCB.EC__: EC: Used to handle transactions and events [ 0.593864] iommu: Default domain type: Translated [ 0.593864] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.593864] SCSI subsystem initialized [ 0.596772] libata version 3.00 loaded. [ 0.596776] ACPI: bus type USB registered [ 0.596785] usbcore: registered new interface driver usbfs [ 0.596791] usbcore: registered new interface driver hub [ 0.596799] usbcore: registered new device driver usb [ 0.596817] EDAC MC: Ver: 3.0.0 [ 0.597028] efivars: Registered efivars operations [ 0.597028] NetLabel: Initializing [ 0.597028] NetLabel: domain hash size = 128 [ 0.597028] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.597028] NetLabel: unlabeled traffic allowed by default [ 0.597028] mctp: management component transport protocol core [ 0.597028] NET: Registered PF_MCTP protocol family [ 0.597028] PCI: Using ACPI for IRQ routing [ 0.614482] PCI: pci_cache_line_size set to 64 bytes [ 0.614664] pci 0000:00:1f.5: BAR 0 [mem 0xfe010000-0xfe010fff]: can't claim; no compatible bridge window [ 0.614842] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff] [ 0.614844] e820: reserve RAM buffer [mem 0x3eb93000-0x3fffffff] [ 0.614845] e820: reserve RAM buffer [mem 0x3f42b000-0x3fffffff] [ 0.614845] e820: reserve RAM buffer [mem 0x5afdc018-0x5bffffff] [ 0.614846] e820: reserve RAM buffer [mem 0x5b499000-0x5bffffff] [ 0.614847] e820: reserve RAM buffer [mem 0x5f466000-0x5fffffff] [ 0.614847] e820: reserve RAM buffer [mem 0x6197e000-0x63ffffff] [ 0.614848] e820: reserve RAM buffer [mem 0x67f00000-0x67ffffff] [ 0.614849] e820: reserve RAM buffer [mem 0x48bc00000-0x48bffffff] [ 0.616794] pci 0000:00:02.0: vgaarb: setting as boot VGA device [ 0.616794] pci 0000:00:02.0: vgaarb: bridge control possible [ 0.616794] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.616794] pci 0000:01:00.0: vgaarb: bridge control possible [ 0.616794] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none [ 0.616794] vgaarb: loaded [ 0.616831] clocksource: Switched to clocksource tsc-early [ 0.617070] VFS: Disk quotas dquot_6.6.0 [ 0.617077] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.617124] pnp: PnP ACPI init [ 0.618346] system 00:02: [io 0x0680-0x069f] has been reserved [ 0.618348] system 00:02: [io 0x164e-0x164f] has been reserved [ 0.618461] system 00:03: [io 0x1854-0x1857] has been reserved [ 0.620395] pnp 00:04: disabling [mem 0xc0000000-0xcfffffff] because it overlaps 0000:00:02.0 BAR 9 [mem 0x00000000-0xdfffffff 64bit pref] [ 0.620413] system 00:04: [mem 0xfedc0000-0xfedc7fff] has been reserved [ 0.620414] system 00:04: [mem 0xfeda0000-0xfeda0fff] has been reserved [ 0.620416] system 00:04: [mem 0xfeda1000-0xfeda1fff] has been reserved [ 0.620417] system 00:04: [mem 0xfed20000-0xfed7ffff] could not be reserved [ 0.620418] system 00:04: [mem 0xfed90000-0xfed93fff] could not be reserved [ 0.620419] system 00:04: [mem 0xfed45000-0xfed8ffff] could not be reserved [ 0.620420] system 00:04: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.620863] system 00:05: [io 0x2000-0x20fe] has been reserved [ 0.621642] pnp: PnP ACPI: found 7 devices [ 0.626992] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.627042] NET: Registered PF_INET protocol family [ 0.627287] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.638429] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear) [ 0.638449] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.638492] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.638805] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear) [ 0.638883] TCP: Hash tables configured (established 131072 bind 65536) [ 0.638998] MPTCP token hash table entries: 16384 (order: 6, 393216 bytes, linear) [ 0.639055] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear) [ 0.639101] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear) [ 0.639151] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.639157] NET: Registered PF_XDP protocol family [ 0.639166] pci 0000:00:02.0: VF BAR 2 [mem 0x4020000000-0x40ffffffff 64bit pref]: assigned [ 0.639170] pci 0000:00:02.0: VF BAR 0 [mem 0x4010000000-0x4016ffffff 64bit]: assigned [ 0.639172] pci 0000:00:15.0: BAR 0 [mem 0x4017000000-0x4017000fff 64bit]: assigned [ 0.639229] pci 0000:00:1f.5: BAR 0 [mem 0x74400000-0x74400fff]: assigned [ 0.639234] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.639236] pci 0000:00:01.0: bridge window [io 0x4000-0x4fff] [ 0.639238] pci 0000:00:01.0: bridge window [mem 0x78000000-0x790fffff] [ 0.639240] pci 0000:00:01.0: bridge window [mem 0x6000000000-0x6201ffffff 64bit pref] [ 0.639244] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.639260] pci 0000:00:1c.5: PCI bridge to [bus 03] [ 0.639262] pci 0000:00:1c.5: bridge window [io 0x3000-0x3fff] [ 0.639265] pci 0000:00:1c.5: bridge window [mem 0x79200000-0x792fffff] [ 0.639272] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.639273] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.639274] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.639275] pci_bus 0000:00: resource 7 [mem 0x000e0000-0x000fffff window] [ 0.639276] pci_bus 0000:00: resource 8 [mem 0x74400000-0xbfffffff window] [ 0.639277] pci_bus 0000:00: resource 9 [mem 0x4000000000-0x7fffffffff window] [ 0.639278] pci_bus 0000:01: resource 0 [io 0x4000-0x4fff] [ 0.639279] pci_bus 0000:01: resource 1 [mem 0x78000000-0x790fffff] [ 0.639280] pci_bus 0000:01: resource 2 [mem 0x6000000000-0x6201ffffff 64bit pref] [ 0.639281] pci_bus 0000:03: resource 0 [io 0x3000-0x3fff] [ 0.639282] pci_bus 0000:03: resource 1 [mem 0x79200000-0x792fffff] [ 0.639824] pci 0000:01:00.1: extending delay after power-on from D3hot to 20 msec [ 0.639850] pci 0000:01:00.1: D0 power state depends on 0000:01:00.0 [ 0.639883] PCI: CLS 64 bytes, default 64 [ 0.639917] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.639918] software IO TLB: mapped [mem 0x0000000056cc2000-0x000000005acc2000] (64MB) [ 0.639939] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2a11290c0c8, max_idle_ns: 440795344938 ns [ 0.639980] clocksource: Switched to clocksource tsc [ 0.639986] Trying to unpack rootfs image as initramfs... [ 0.639994] platform rtc_cmos: registered platform RTC device (no PNP device found) [ 0.653152] Initialise system trusted keyrings [ 0.653160] Key type blacklist registered [ 0.653230] workingset: timestamp_bits=36 max_order=22 bucket_order=0 [ 0.653321] fuse: init (API version 7.41) [ 0.653382] integrity: Platform Keyring initialized [ 0.653384] integrity: Machine keyring initialized [ 0.661349] NET: Registered PF_ALG protocol family [ 0.661351] Key type asymmetric registered [ 0.661351] Asymmetric key parser 'x509' registered [ 0.661371] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246) [ 0.661444] io scheduler mq-deadline registered [ 0.661445] io scheduler kyber registered [ 0.661452] io scheduler bfq registered [ 0.661648] ledtrig-cpu: registered to indicate activity on CPUs [ 0.661805] pcieport 0000:00:01.0: PME: Signaling with IRQ 120 [ 0.661844] pcieport 0000:00:01.0: AER: enabled with IRQ 120 [ 0.661934] pcieport 0000:00:1c.0: PME: Signaling with IRQ 121 [ 0.662069] pcieport 0000:00:1c.5: PME: Signaling with IRQ 122 [ 0.662102] pcieport 0000:00:1c.5: AER: enabled with IRQ 122 [ 0.662168] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 0.662292] Monitor-Mwait will be used to enter C-1 state [ 0.662296] Monitor-Mwait will be used to enter C-2 state [ 0.662299] Monitor-Mwait will be used to enter C-3 state [ 0.663332] ACPI: AC: AC Adapter [ADP1] (on-line) [ 0.663357] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:35/PNP0C09:00/PNP0C0D:00/input/input0 [ 0.663901] ACPI: button: Lid Switch [LID0] [ 0.663935] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 [ 0.663947] ACPI: button: Sleep Button [SLPB] [ 0.663962] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2 [ 0.673242] ACPI: button: Power Button [PWRB] [ 0.680659] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.680660] ACPI: thermal: Thermal Zone [THRM] (60 C) [ 0.680894] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.682101] hpet_acpi_add: no address or irqs in _CRS [ 0.682119] Non-volatile memory driver v1.3 [ 0.682120] Linux agpgart interface v0.103 [ 0.703609] Freeing initrd memory: 91068K [ 0.715717] ACPI: bus type drm_connector registered [ 0.717169] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.717173] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1 [ 0.718258] xhci_hcd 0000:00:14.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000100200009810 [ 0.718495] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.718497] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 0.718498] xhci_hcd 0000:00:14.0: Host supports USB 3.1 Enhanced SuperSpeed [ 0.718519] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.12 [ 0.718520] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 0.718521] usb usb1: Product: xHCI Host Controller [ 0.718521] usb usb1: Manufacturer: Linux 6.12.31-gentoo xhci-hcd [ 0.718522] usb usb1: SerialNumber: ... [ 0.718614] hub 1-0:1.0: USB hub found [ 0.718632] hub 1-0:1.0: 12 ports detected [ 0.719512] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.12 [ 0.719514] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 0.719514] usb usb2: Product: xHCI Host Controller [ 0.719515] usb usb2: Manufacturer: Linux 6.12.31-gentoo xhci-hcd [ 0.719515] usb usb2: SerialNumber: ... [ 0.719582] hub 2-0:1.0: USB hub found [ 0.719594] hub 2-0:1.0: 4 ports detected [ 0.720108] usbcore: registered new interface driver usbserial_generic [ 0.720112] usbserial: USB Serial support registered for generic [ 0.720247] rtc_cmos rtc_cmos: RTC can wake from S4 [ 0.721160] rtc_cmos rtc_cmos: registered as rtc0 [ 0.721338] rtc_cmos rtc_cmos: setting system clock to 2025-07-16T09:12:10 UTC (1752657130) [ 0.721362] rtc_cmos rtc_cmos: alarms up to one month, y3k, 114 bytes nvram [ 0.722657] intel_pstate: Intel P-state driver initializing [ 0.724196] intel_pstate: HWP enabled [ 0.724476] efifb: probing for efifb [ 0.724487] efifb: framebuffer at 0x4000000000, using 8100k, total 8100k [ 0.724489] efifb: mode is 1920x1080x32, linelength=7680, pages=1 [ 0.724490] efifb: scrolling: redraw [ 0.724491] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 0.724534] fbcon: Deferring console take-over [ 0.724535] fb0: EFI VGA frame buffer device [ 0.724568] hid: raw HID events driver (C) Jiri Kosina [ 0.724625] drop_monitor: Initializing network drop monitor service [ 0.724737] NET: Registered PF_INET6 protocol family [ 0.727984] Segment Routing with IPv6 [ 0.727986] RPL Segment Routing with IPv6 [ 0.728004] In-situ OAM (IOAM) with IPv6 [ 0.728036] NET: Registered PF_PACKET protocol family [ 0.729350] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.729911] microcode: Current revision: 0x0000410e [ 0.730405] IPI shorthand broadcast: enabled [ 0.732060] sched_clock: Marking stable (723884144, 6503326)->(748002253, -17614783) [ 0.732426] registered taskstats version 1 [ 0.733552] Loading compiled-in X.509 certificates [ 0.736780] Loaded X.509 cert 'Build time autogenerated kernel key: d5f56c09c0d2f4f4381a07ff779e8dc0389505ae' [ 0.737671] Demotion targets for Node 0: null [ 0.737847] Key type .fscrypt registered [ 0.737848] Key type fscrypt-provisioning registered [ 0.738101] integrity: Loading X.509 certificate: UEFI:db [ 0.740027] integrity: Loaded X.509 cert 'Database Key: 00f05e1a9861af6725cdfda1c50654c686' [ 0.740029] integrity: Loading X.509 certificate: UEFI:db [ 0.740045] integrity: Loaded X.509 cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4' [ 0.740045] integrity: Loading X.509 certificate: UEFI:db [ 0.740054] integrity: Loaded X.509 cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53' [ 0.740055] integrity: Loading X.509 certificate: UEFI:db [ 0.740062] integrity: Loaded X.509 cert 'Microsoft Option ROM UEFI CA 2023: 514fbf937fa46fb57bf07af8bed84b3b864b1711' [ 0.740063] integrity: Loading X.509 certificate: UEFI:db [ 0.740070] integrity: Loaded X.509 cert 'Microsoft UEFI CA 2023: 81aa6b3244c935bce0d6628af39827421e32497d' [ 0.740070] integrity: Loading X.509 certificate: UEFI:db [ 0.740078] integrity: Loaded X.509 cert 'Microsoft Corporation: Windows UEFI CA 2023: aefc5fbbbe055d8f8daa585473499417ab5a5272' [ 0.741098] PM: Magic number: 1:330:222 [ 0.741160] memory memory104: hash matches [ 0.741906] RAS: Correctable Errors collector initialized. [ 0.744597] clk: Disabling unused clocks [ 0.744598] PM: genpd: Disabling unused power domains [ 0.803715] ACPI: battery: Slot [BAT1] (battery present) [ 0.833158] Freeing unused decrypted memory: 2028K [ 0.833737] Freeing unused kernel image (initmem) memory: 4172K [ 0.833755] Write protecting the kernel read-only data: 32768k [ 0.834260] Freeing unused kernel image (rodata/data gap) memory: 44K [ 0.839698] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 0.839701] rodata_test: all tests were successful [ 0.839703] Run /init as init process [ 0.839704] with arguments: [ 0.839705] /init [ 0.839705] with environment: [ 0.839706] HOME=/ [ 0.839706] TERM=linux [ 0.839707] BOOT_IMAGE=/@/boot/kernel-6.12.31-gentoo [ 0.860626] systemd[1]: Successfully made /usr/ read-only. [ 0.860712] systemd[1]: systemd 257.6 running in system mode (+PAM -AUDIT -SELINUX -APPARMOR +IMA +IPE +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID -CURL -ELFUTILS -FIDO2 +IDN2 -IDN -IPTC +KMOD -LIBCRYPTSETUP -LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 -PWQUALITY -P11KIT -QRENCODE -TPM2 -BZIP2 +LZ4 -XZ -ZLIB +ZSTD -BPF_FRAMEWORK -BTF -XKBCOMMON +UTMP -SYSVINIT +LIBARCHIVE) [ 0.860715] systemd[1]: Detected architecture x86-64. [ 0.860716] systemd[1]: Running in initrd. [ 0.860801] fbcon: Taking over console [ 0.860830] Console: switching to colour frame buffer device 240x67 [ 0.861971] systemd[1]: Hostname set to ... [ 0.966573] usb 1-1: new low-speed USB device number 2 using xhci_hcd [ 1.031329] systemd[1]: Queued start job for default target Initrd Default Target. [ 1.098755] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ 1.099089] systemd[1]: Expecting device /dev/disk/by-uuid/9F89-3C1D... [ 1.099197] systemd[1]: Expecting device /dev/disk/by-uuid/HASH_92B-0C68-26FC-7E76-01BAF745C85A... [ 1.099371] systemd[1]: Reached target Initrd /usr File System. [ 1.099501] systemd[1]: Reached target Path Units. [ 1.099625] systemd[1]: Reached target Slice Units. [ 1.099740] systemd[1]: Reached target Swaps. [ 1.099894] systemd[1]: Reached target Timer Units. [ 1.100297] systemd[1]: Listening on Journal Socket (/dev/log). [ 1.100568] systemd[1]: Listening on Journal Sockets. [ 1.100823] systemd[1]: Listening on udev Control Socket. [ 1.101014] systemd[1]: Listening on udev Kernel Socket. [ 1.101126] systemd[1]: Reached target Socket Units. [ 1.105140] systemd[1]: Starting Create List of Static Device Nodes... [ 1.108177] systemd[1]: Starting Check battery level during early boot... [ 1.113115] systemd[1]: Starting Journal Service... [ 1.113186] usb 1-1: New USB device found, idVendor=30fa, idProduct=1040, bcdDevice= 1.00 [ 1.113190] usb 1-1: New USB device strings: Mfr=2, Product=1, SerialNumber=... [ 1.113191] usb 1-1: Product: USB GAMING MOUSE [ 1.113192] usb 1-1: Manufacturer: INSTANT [ 1.113273] systemd[1]: Load Kernel Modules was skipped because no trigger condition checks were met. [ 1.113674] systemd[1]: Starting Apply Kernel Variables... [ 1.114140] systemd[1]: Starting Virtual Console Setup... [ 1.115088] systemd[1]: Finished Create List of Static Device Nodes. [ 1.115485] systemd[1]: Starting Create Static Device Nodes in /dev gracefully... [ 1.117163] systemd[1]: Finished Check battery level during early boot. [ 1.119184] systemd[1]: Finished Apply Kernel Variables. [ 1.121136] systemd[1]: Finished Virtual Console Setup. [ 1.121533] systemd[1]: Starting dracut ask for additional cmdline parameters... [ 1.123247] systemd-journald[216]: Collecting audit messages is disabled. [ 1.124870] systemd[1]: Finished Create Static Device Nodes in /dev gracefully. [ 1.125230] systemd[1]: Starting Create Static Device Nodes in /dev... [ 1.133253] systemd[1]: Finished Create Static Device Nodes in /dev. [ 1.133305] systemd[1]: Reached target Preparation for Local File Systems. [ 1.133322] systemd[1]: Reached target Local File Systems. [ 1.136273] systemd[1]: Started Journal Service. [ 1.182344] xor: automatically using best checksumming function avx [ 1.185107] raid6: skipped pq benchmark and selected avx2x4 [ 1.185109] raid6: using avx2x2 recovery algorithm [ 1.229846] usb 1-7: new full-speed USB device number 3 using xhci_hcd [ 1.364936] usb 1-7: New USB device found, idVendor=1462, idProduct=1601, bcdDevice= 3.00 [ 1.364939] usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 1.364940] usb 1-7: Product: MysticLight MS-1565 [ 1.364941] usb 1-7: Manufacturer: MSI [ 1.364942] usb 1-7: SerialNumber: ... [ 1.378164] Btrfs loaded, zoned=yes, fsverity=yes [ 1.483183] usb 1-10: new full-speed USB device number 4 using xhci_hcd [ 1.490976] usbcore: registered new interface driver usbhid [ 1.490979] usbhid: USB HID core driver [ 1.498324] input: INSTANT USB GAMING MOUSE as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/0003:30FA:1040.0001/input/input3 [ 1.498406] hid-generic 0003:30FA:1040.0001: input,hidraw0: USB HID v1.10 Mouse [INSTANT USB GAMING MOUSE ] on usb-0000:00:14.0-1/input0 [ 1.498672] input: INSTANT USB GAMING MOUSE Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.1/0003:30FA:1040.0002/input/input4 [ 1.553723] hid-generic 0003:30FA:1040.0002: input,hiddev96,hidraw1: USB HID v1.10 Keyboard [INSTANT USB GAMING MOUSE ] on usb-0000:00:14.0-1/input1 [ 1.553946] hid-generic 0003:1462:1601.0003: hiddev97,hidraw2: USB HID v1.11 Device [MSI MysticLight MS-1565] on usb-0000:00:14.0-7/input0 [ 1.578797] wmi_bus wmi_bus-PNP0C14:00: [Firmware Bug]: WQAK data block query control method not found [ 1.578800] wmi_bus wmi_bus-PNP0C14:00: [Firmware Bug]: WQAL data block query control method not found [ 1.578801] wmi_bus wmi_bus-PNP0C14:00: [Firmware Bug]: WMAJ method block execution control method not found [ 1.581417] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 1.585076] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.585113] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.585780] cryptd: max_cpu_qlen set to 1000 [ 1.586225] vmd 0000:00:0e.0: PCI host bridge to bus 10000:e0 [ 1.586228] pci_bus 10000:e0: root bus resource [bus e0-ff] [ 1.586230] pci_bus 10000:e0: root bus resource [mem 0x76000000-0x77ffffff] [ 1.586231] pci_bus 10000:e0: root bus resource [mem 0x6205102000-0x62051fffff 64bit] [ 1.586250] pci 10000:e0:06.0: [8086:a74d] type 01 class 0x060400 PCIe Root Port [ 1.586264] pci 10000:e0:06.0: PCI bridge to [bus e1] [ 1.586267] pci 10000:e0:06.0: bridge window [io 0x0000-0x0fff] [ 1.586269] pci 10000:e0:06.0: bridge window [mem 0x76000000-0x760fffff] [ 1.586302] pci 10000:e0:06.0: PME# supported from D0 D3hot D3cold [ 1.586321] pci 10000:e0:06.0: PTM enabled (root), 4ns granularity [ 1.586400] pci 10000:e0:06.0: Primary bus is hard wired to 0 [ 1.586425] pci 10000:e1:00.0: [144d:a80d] type 00 class 0x010802 PCIe Endpoint [ 1.586442] pci 10000:e1:00.0: BAR 0 [mem 0x76000000-0x76003fff 64bit] [ 1.586706] pci 10000:e0:06.0: PCI bridge to [bus e1] [ 1.586711] pci 10000:e0:06.0: Primary bus is hard wired to 0 [ 1.594789] AES CTR mode by8 optimization enabled [ 1.602886] intel-lpss 0000:00:15.0: enabling device (0004 -> 0006) [ 1.603179] idma64 idma64.0: Found Intel integrated DMA 64-bit [ 1.610806] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input6 [ 1.617968] usb 1-10: New USB device found, idVendor=8087, idProduct=0033, bcdDevice= 0.00 [ 1.617978] usb 1-10: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 1.764227] input: MSNB0001:00 06CB:7E7E Mouse as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-0/i2c-MSNB0001:00/0018:06CB:7E7E.0004/input/input8 [ 1.764684] input: MSNB0001:00 06CB:7E7E Touchpad as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-0/i2c-MSNB0001:00/0018:06CB:7E7E.0004/input/input9 [ 1.764990] hid-generic 0018:06CB:7E7E.0004: input,hidraw3: I2C HID v1.00 Mouse [MSNB0001:00 06CB:7E7E] on i2c-MSNB0001:00 [ 1.773250] pci 10000:e0:06.0: bridge window [mem 0x76000000-0x760fffff]: assigned [ 1.773255] pci 10000:e0:06.0: bridge window [io size 0x1000]: can't assign; no space [ 1.773257] pci 10000:e0:06.0: bridge window [io size 0x1000]: failed to assign [ 1.773259] pci 10000:e1:00.0: BAR 0 [mem 0x76000000-0x76003fff 64bit]: assigned [ 1.773268] pci 10000:e0:06.0: PCI bridge to [bus e1] [ 1.773271] pci 10000:e0:06.0: bridge window [mem 0x76000000-0x760fffff] [ 1.773288] pci 10000:e1:00.0: can't override BIOS ASPM; OS doesn't have ASPM control [ 1.773305] pcieport 10000:e0:06.0: can't derive routing for PCI INT D [ 1.773307] pcieport 10000:e0:06.0: PCI INT D: no GSI [ 1.773368] pcieport 10000:e0:06.0: PME: Signaling with IRQ 151 [ 1.773515] pcieport 10000:e0:06.0: AER: enabled with IRQ 151 [ 1.773588] vmd 0000:00:0e.0: Bound to PCI domain 10000 [ 1.810857] nvme nvme0: pci function 10000:e1:00.0 [ 1.810870] pcieport 10000:e0:06.0: can't derive routing for PCI INT A [ 1.810872] nvme 10000:e1:00.0: PCI INT A: no GSI [ 1.814980] nvme nvme0: D3 entry latency set to 10 seconds [ 1.829384] nvme nvme0: allocated 64 MiB host memory buffer. [ 1.859328] nvme nvme0: 16/0/0 default/read/poll queues [ 1.867081] nvme0n1: p1 p2 [ 1.873350] input: MSNB0001:00 06CB:7E7E Mouse as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-0/i2c-MSNB0001:00/0018:06CB:7E7E.0004/input/input11 [ 1.873489] input: MSNB0001:00 06CB:7E7E Touchpad as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-0/i2c-MSNB0001:00/0018:06CB:7E7E.0004/input/input12 [ 1.873657] hid-multitouch 0018:06CB:7E7E.0004: input,hidraw3: I2C HID v1.00 Mouse [MSNB0001:00 06CB:7E7E] on i2c-MSNB0001:00 [ 2.205339] BTRFS: device label ... devid 1 transid 13351 /dev/nvme0n1p2 (259:2) scanned by mount (434) [ 2.205869] BTRFS info (device nvme0n1p2): first mount of filesystem HASH_92B-0C68-26FC-7E76-01BAF745C85A [ 2.205911] BTRFS info (device nvme0n1p2): using crc32c (crc32c-intel) checksum algorithm [ 2.205927] BTRFS info (device nvme0n1p2): using free-space-tree [ 2.603496] systemd-journald[216]: Received SIGTERM from PID 1 (systemd). [ 2.674792] systemd[1]: systemd 257.6 running in system mode (+PAM -AUDIT -SELINUX -APPARMOR +IMA +IPE +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID -CURL -ELFUTILS -FIDO2 +IDN2 -IDN -IPTC +KMOD -LIBCRYPTSETUP -LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 -PWQUALITY -P11KIT -QRENCODE -TPM2 -BZIP2 +LZ4 -XZ -ZLIB +ZSTD -BPF_FRAMEWORK -BTF -XKBCOMMON +UTMP -SYSVINIT +LIBARCHIVE) [ 2.674811] systemd[1]: Detected architecture x86-64. [ 2.983423] zram: Added device: zram0 [ 3.015719] systemd[1]: /usr/lib/systemd/system/zapret.service:10: Unit uses KillMode=none. This is unsafe, as it disables systemd's process lifecycle management for the service. Please update the service to use a safer KillMode=, such as 'mixed' or 'control-group'. Support for KillMode=none is deprecated and will eventually be removed. [ 3.060337] systemd[1]: initrd-switch-root.service: Deactivated successfully. [ 3.060408] systemd[1]: Stopped Switch Root. [ 3.061218] systemd[1]: systemd-journald.service: Scheduled restart job, restart counter is at 1. [ 3.061507] systemd[1]: Created slice Virtual Machine and Container Slice. [ 3.062316] systemd[1]: Created slice CUPS Slice. [ 3.063029] systemd[1]: Created slice Slice /system/getty. [ 3.063572] systemd[1]: Created slice Slice /system/systemd-fsck. [ 3.064094] systemd[1]: Created slice Slice /system/systemd-zram-setup. [ 3.064574] systemd[1]: Created slice User and Session Slice. [ 3.064979] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ 3.065381] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 3.065852] systemd[1]: Set up automount ... [ 3.066251] systemd[1]: Expecting device /dev/nvme0n1p1... [ 3.066652] systemd[1]: Expecting device /dev/nvme0n1p2... [ 3.067048] systemd[1]: Expecting device /dev/zram0... [ 3.067437] systemd[1]: Reached target Login Prompts. [ 3.067829] systemd[1]: Stopped target Switch Root. [ 3.068214] systemd[1]: Stopped target Initrd File Systems. [ 3.068592] systemd[1]: Stopped target Initrd Root File System. [ 3.068982] systemd[1]: Reached target Remote File Systems. [ 3.069362] systemd[1]: Reached target Slice Units. [ 3.069742] systemd[1]: Reached target System Time Set. [ 3.071623] systemd[1]: Listening on Process Core Dump Socket. [ 3.072307] systemd[1]: Listening on Credential Encryption/Decryption. [ 3.072904] systemd[1]: Listening on Journal Audit Socket. [ 3.073295] systemd[1]: Listening on DDI File System Mounter Socket. [ 3.073699] systemd[1]: Listening on Network Service Netlink Socket. [ 3.074079] systemd[1]: Listening on Namespace Resource Manager Socket. [ 3.074467] systemd[1]: Listening on udev Control Socket. [ 3.074847] systemd[1]: Listening on udev Kernel Socket. [ 3.075232] systemd[1]: Listening on User Database Manager Socket. [ 3.076652] systemd[1]: Mounting Huge Pages File System... [ 3.077437] systemd[1]: Mounting POSIX Message Queue File System... [ 3.078271] systemd[1]: Mounting Kernel Debug File System... [ 3.079112] systemd[1]: Mounting Kernel Trace File System... [ 3.107353] systemd[1]: Starting Create List of Static Device Nodes... [ 3.108447] systemd[1]: Starting Load Kernel Module configfs... [ 3.110832] systemd[1]: Starting Load Kernel Module dm_mod... [ 3.114149] systemd[1]: Starting Load Kernel Module drm... [ 3.114977] systemd[1]: Starting Load Kernel Module efi_pstore... [ 3.117512] systemd[1]: Starting Load Kernel Module fuse... [ 3.120824] systemd[1]: Starting Load Kernel Module loop... [ 3.122130] systemd[1]: systemd-fsck-root.service: Deactivated successfully. [ 3.122292] systemd[1]: Stopped File System Check on Root Device. [ 3.124045] systemd[1]: Clear Stale Hibernate Storage Info was skipped because of an unmet condition check (ConditionPathExists=/sys/firmware/efi/efivars/HibernateLocation-HASH_2F3-D74F-2DCC-7F25-C1D296350508). [ 3.129687] systemd[1]: Starting Journal Service... [ 3.135111] systemd[1]: Starting Load Kernel Modules... [ 3.138629] systemd[1]: Starting Generate network units from Kernel command line... [ 3.142002] systemd[1]: Starting Remount Root and Kernel File Systems... [ 3.146325] systemd[1]: Starting Load udev Rules from Credentials... [ 3.149472] systemd[1]: Starting Coldplug All udev Devices... [ 3.154690] loop: module loaded [ 3.155865] systemd[1]: Mounted Huge Pages File System. [ 3.157668] systemd[1]: Mounted POSIX Message Queue File System. [ 3.158632] systemd[1]: Mounted Kernel Debug File System. [ 3.159612] systemd[1]: Mounted Kernel Trace File System. [ 3.160842] systemd[1]: Finished Create List of Static Device Nodes. [ 3.162028] systemd[1]: XXX@XXX: Deactivated successfully. [ 3.162297] systemd[1]: Finished Load Kernel Module configfs. [ 3.163441] systemd[1]: XXX@XXX: Deactivated successfully. [ 3.163702] systemd[1]: Finished Load Kernel Module drm. [ 3.165285] vboxdrv: loading out-of-tree module taints kernel. [ 3.165300] vboxdrv: module verification failed: signature and/or required key missing - tainting kernel [ 3.165823] systemd[1]: XXX@XXX: Deactivated successfully. [ 3.166057] systemd[1]: Finished Load Kernel Module efi_pstore. [ 3.167173] systemd[1]: XXX@XXX: Deactivated successfully. [ 3.167389] systemd[1]: Finished Load Kernel Module fuse. [ 3.168305] systemd[1]: XXX@XXX: Deactivated successfully. [ 3.168505] systemd[1]: Finished Load Kernel Module loop. [ 3.176849] systemd-journald[501]: Collecting audit messages is enabled. [ 3.183562] vboxdrv: Found 16 processor cores/threads [ 3.183724] systemd[1]: Finished Generate network units from Kernel command line. [ 3.184838] systemd[1]: Started Journal Service. [ 3.190687] device-mapper: uevent: version 1.0.3 [ 3.190804] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: XXX@XXX [ 3.198846] systemd-journald[501]: Received client request to flush runtime journal. [ 3.210071] vboxdrv: TSC mode is Invariant, tentative frequency 2918389761 Hz [ 3.210073] vboxdrv: Successfully loaded version 7.1.10 r169112 (interface 0x00340001) [ 3.248719] VBoxNetFlt: Successfully started. [ 3.269682] VBoxNetAdp: Successfully started. [ 3.434217] zram0: detected capacity change from 0 to 64270336 [ 3.454034] mousedev: PS/2 mouse device common for all mice [ 3.460683] input: PC Speaker as /devices/platform/pcspkr/input/input15 [ 3.461842] input: MSI WMI hotkeys as /devices/virtual/input/input16 [ 3.462806] input: Intel HID events as /devices/platform/INTC1078:00/input/input17 [ 3.462929] intel-hid INTC1078:00: platform supports 5 button array [ 3.462951] input: Intel HID 5 button array as /devices/platform/INTC1078:00/input/input18 [ 3.465513] Consider using thermal netlink events interface [ 3.473129] i801_smbus 0000:00:1f.4: SPD Write Disable is set [ 3.473184] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt [ 3.475823] i2c i2c-1: Successfully instantiated SPD at 0x50 [ 3.480833] intel_pmc_core INT33A1:00: initialized [ 3.489936] mei_me 0000:00:16.0: enabling device (0000 -> 0002) [ 3.496652] input: gpio-keys as /devices/platform/ACPI0011:00/gpio-keys.1.auto/input/input19 [ 3.505435] msi_ec: Firmware version is not supported: '17L5EMS1.115' [ 3.512008] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 655360 ms ovfl timer [ 3.512012] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules [ 3.512013] RAPL PMU: hw unit of domain package 2^-14 Joules [ 3.512014] RAPL PMU: hw unit of domain psys 2^-14 Joules [ 3.539329] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 3.539429] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 3.539507] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 3.539517] Loading firmware: regulatory.db [ 3.539705] Creating 1 MTD partitions on "0000:00:1f.5": [ 3.539708] 0x000000000000-0x000002000000 : "BIOS" [ 3.549357] iTCO_vendor_support: vendor-support=0 [ 3.549418] intel_rapl_msr: PL4 support detected. [ 3.549465] intel_rapl_common: Found RAPL domain package [ 3.549468] intel_rapl_common: Found RAPL domain core [ 3.549470] intel_rapl_common: Found RAPL domain psys [ 3.549904] Loading firmware: regulatory.db.p7s [ 3.549930] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control [ 3.550407] Bluetooth: Core ver 2.22 [ 3.550423] NET: Registered PF_BLUETOOTH protocol family [ 3.550425] Bluetooth: HCI device and connection manager initialized [ 3.550428] Bluetooth: HCI socket layer initialized [ 3.550429] Bluetooth: L2CAP socket layer initialized [ 3.550431] Bluetooth: SCO socket layer initialized [ 3.554422] spd5118 1-0050: DDR5 temperature sensor: vendor 0x06:0x32 revision 1.6 [ 3.564782] r8169 0000:03:00.0 eth0: RTL8168h/8111h, XXX, XID 541, IRQ 171 [ 3.564789] r8169 0000:03:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko] [ 3.565235] spd5118 1-0052: DDR5 temperature sensor: vendor 0x06:0x32 revision 1.6 [ 3.578278] r8169 0000:03:00.0 enp3s0: renamed from eth0 [ 3.645392] Adding 32135164k swap on /dev/zram0. Priority:100 extents:1 across:32135164k SSDsc [ 3.735304] iTCO_wdt iTCO_wdt: Found a Intel PCH TCO device (Version=6, TCOBASE=0x0400) [ 3.735856] iTCO_wdt iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 3.739801] Intel(R) Wireless WiFi driver for Linux [ 3.740051] iwlwifi 0000:00:14.3: enabling device (0000 -> 0002) [ 3.746122] iwlwifi 0000:00:14.3: Detected crf-id 0x400410, cnv-id 0x80400 wfpm id 0x80000020 [ 3.746167] iwlwifi 0000:00:14.3: PCI dev 51f1/0094, rev=0x370, rfid=0x2010d000 [ 3.746177] iwlwifi 0000:00:14.3: Detected Intel(R) Wi-Fi 6E AX211 160MHz [ 3.749864] Loading firmware: iwlwifi-so-a0-gf-a0-89.ucode [ 3.769203] iwlwifi 0000:00:14.3: TLV_FW_FSEQ_VERSION: FSEQ Version: XXX.XXX.XXX.XXX [ 3.770323] Loading firmware: iwl-debug-yoyo.bin [ 3.770448] iwlwifi 0000:00:14.3: loaded firmware version 89.af655058.0 so-a0-gf-a0-89.ucode op_mode iwlmvm [ 3.792082] nvidia: module license 'NVIDIA' taints kernel. [ 3.792089] Disabling lock debugging due to kernel taint [ 3.792096] nvidia: module license taints kernel. [ 3.815513] pps_core: LinuxPPS API ver. 1 registered [ 3.815516] pps_core: Software ver. 5.3.6 - Copyright 0FB6-08D5 Rodolfo Giometti <XXX@XXX> [ 3.964990] PTP clock support registered [ 3.964993] proc_thermal_pci 0000:00:04.0: enabling device (0000 -> 0002) [ 3.965375] intel_rapl_common: Found RAPL domain package [ 3.969629] nvidia-nvlink: Nvlink Core is being initialized, major device number 511 [ 3.970972] nvidia 0000:01:00.0: enabling device (0000 -> 0003) [ 3.971468] nvidia 0000:01:00.0: vgaarb: VGA decodes changed: olddecodes=io+mem,decodes=none:owns=none [ 3.982188] usbcore: registered new interface driver btusb [ 3.987501] Bluetooth: hci0: Firmware timestamp 2025.13 buildtype 1 build 82008 [ 3.987527] Bluetooth: hci0: Firmware SHA1: 0x47cf9d0e [ 3.987572] Bluetooth: hci0: DSM reset method type: 0x00 [ 3.988129] snd_hda_intel 0000:00:1f.3: Digital mics found on Skylake+ platform, using SOF driver [ 3.988179] snd_hda_intel 0000:01:00.1: enabling device (0000 -> 0002) [ 3.988273] snd_hda_intel 0000:01:00.1: Disabling MSI [ 3.988276] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client [ 3.988448] Loading firmware: intel/ibt-0040-0041.sfi [ 3.994202] Bluetooth: hci0: Found device firmware: intel/ibt-0040-0041.sfi [ 3.994210] Bluetooth: hci0: Boot Address: 0x100800 [ 3.994211] Bluetooth: hci0: Firmware Version: 88-13.25 [ 3.994212] Bluetooth: hci0: Firmware already loaded [ 3.998456] Bluetooth: hci0: Fseq status: Success (0x00) [ 3.998474] Bluetooth: hci0: Fseq executed: XXX.XXX.XXX.XXX [ 3.998484] Bluetooth: hci0: Fseq BT Top: XXX.XXX.XXX.XXX [ 4.009989] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card0/input20 [ 4.010019] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card0/input21 [ 4.010041] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card0/input22 [ 4.010060] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card0/input23 [ 4.021710] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 570.169 Thu Jun 12 20:04:34 UTC 2025 [ 4.033649] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 570.169 Thu Jun 12 19:28:42 UTC 2025 [ 4.037840] [drm] [nvidia-drm] [GPU ID 0x00000100] Loading driver [ 4.038085] Loading firmware: nvidia/570.169/gsp_ga10x.bin [ 4.367585] iwlwifi 0000:00:14.3: WFPM_UMAC_PD_NOTIFICATION: 0x20 [ 4.367632] iwlwifi 0000:00:14.3: WFPM_LMAC2_PD_NOTIFICATION: 0x1f [ 4.367640] iwlwifi 0000:00:14.3: WFPM_AUTH_KEY_0: 0x90 [ 4.367649] iwlwifi 0000:00:14.3: CNVI_SCU_SEQ_DATA_DW9: 0x0 [ 4.367745] iwlwifi 0000:00:14.3: Detected RF GF, rfid=0x2010d000 [ 4.367748] Loading firmware: iwlwifi-so-a0-gf-a0.pnvm [ 4.368687] iwlwifi 0000:00:14.3: loaded PNVM version 1c1ef094 [ 4.369012] iwlwifi 0000:00:14.3: RFIm is deactivated, reason = 4 [ 4.452813] iwlwifi 0000:00:14.3: base HW address: XXX [ 4.639628] sof-audio-pci-intel-tgl 0000:00:1f.3: enabling device (0000 -> 0002) [ 4.639765] sof-audio-pci-intel-tgl 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if 0x040100 [ 4.644536] i915 0000:00:02.0: [drm] Found ALDERLAKE_P/RPL-P (device ID a7a8) display version 13.00 stepping E0 [ 4.645073] Console: switching to colour dummy device 80x25 [ 4.645087] i915 0000:00:02.0: vgaarb: deactivate vga console [ 4.645261] i915 0000:00:02.0: [drm] Using Transparent Hugepages [ 4.645593] i915 0000:00:02.0: vgaarb: VGA decodes changed: olddecodes=io+mem,decodes=none:owns=io+mem [ 4.645647] Loading firmware: i915/adlp_dmc.bin [ 4.646918] intel_tcc_cooling: TCC Offset locked [ 4.648363] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/adlp_dmc.bin (v2.20) [ 4.654427] iwlwifi 0000:00:14.3 wlo1: renamed from wlan0 [ 4.655920] Loading firmware: i915/adlp_guc_70.bin [ 4.657686] Loading firmware: i915/tgl_huc.bin [ 4.661766] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/adlp_guc_70.bin version 70.44.1 [ 4.661770] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/tgl_huc.bin version 7.9.3 [ 4.676529] i915 0000:00:02.0: [drm] GT0: HuC: authenticated for all workloads [ 4.676927] i915 0000:00:02.0: [drm] GT0: GUC: submission enabled [ 4.676928] i915 0000:00:02.0: [drm] GT0: GUC: SLPC enabled [ 4.677323] i915 0000:00:02.0: [drm] GT0: GUC: RC enabled [ 4.678145] mei_pxp 0000:00:16.0-HASH_CB2-4920-52D1-D0DC-7EB0C5A0EBDF: bound 0000:00:02.0 (ops i915_pxp_tee_component_ops [i915]) [ 4.678340] i915 0000:00:02.0: [drm] Protected Xe Path (PXP) protected content support initialized [ 4.678345] mei_hdcp 0000:00:16.0-HASH_6A4-F9B6-59CA-B5B6-70CADF8C6425: bound 0000:00:02.0 (ops i915_hdcp_ops [i915]) [ 4.680458] [drm] Initialized i915 1.6.0 for 0000:00:02.0 on minor 1 [ 4.680606] ACPI: video: Video Device [PEGP] (multi-head: no rom: yes post: no) [ 4.680627] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/LNXVIDEO:00/input/input24 [ 4.681402] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 4.681593] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input25 [ 4.683113] fbcon: i915drmfb (fb0) is primary device [ 4.683028] sof-audio-pci-intel-tgl 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) [ 4.690030] sof-audio-pci-intel-tgl 0000:00:1f.3: use msi interrupt mode [ 4.693425] Console: switching to colour frame buffer device 240x67 [ 4.701345] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device [ 4.738034] sof-audio-pci-intel-tgl 0000:00:1f.3: hda codecs found, mask 5 [ 4.738038] sof-audio-pci-intel-tgl 0000:00:1f.3: using HDA machine driver skl_hda_dsp_generic now [ 4.738039] sof-audio-pci-intel-tgl 0000:00:1f.3: NHLT device BT(0) detected, ssp_mask 0x4 [ 4.738041] sof-audio-pci-intel-tgl 0000:00:1f.3: BT link detected in NHLT tables: 0x4 [ 4.738042] sof-audio-pci-intel-tgl 0000:00:1f.3: DMICs detected in NHLT tables: 2 [ 4.738294] Loading firmware: intel/sof/sof-rpl.ri [ 4.741815] Loading firmware: intel/sof-tplg/sof-hda-generic-2ch.tplg [ 4.742298] sof-audio-pci-intel-tgl 0000:00:1f.3: Firmware paths/files for ipc type 0: [ 4.742300] sof-audio-pci-intel-tgl 0000:00:1f.3: Firmware file: intel/sof/sof-rpl.ri [ 4.742301] sof-audio-pci-intel-tgl 0000:00:1f.3: Topology file: intel/sof-tplg/sof-hda-generic-2ch.tplg [ 4.742310] Loading firmware: intel/sof/sof-rpl.ri [ 4.742642] sof-audio-pci-intel-tgl 0000:00:1f.3: Firmware info: version 2:2:0-57864 [ 4.742643] sof-audio-pci-intel-tgl 0000:00:1f.3: Firmware: ABI 3:22:1 Kernel ABI 3:23:1 [ 4.742645] sof-audio-pci-intel-tgl 0000:00:1f.3: unknown sof_ext_man header type 3 size 0x30 [ 4.809386] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 4.809388] Bluetooth: BNEP filters: protocol multicast [ 4.809391] Bluetooth: BNEP socket layer initialized [ 4.810287] Bluetooth: MGMT ver 1.23 [ 4.853142] sof-audio-pci-intel-tgl 0000:00:1f.3: Firmware info: version 2:2:0-57864 [ 4.853146] sof-audio-pci-intel-tgl 0000:00:1f.3: Firmware: ABI 3:22:1 Kernel ABI 3:23:1 [ 4.871979] Loading firmware: intel/sof-tplg/sof-hda-generic-2ch.tplg [ 4.872030] sof-audio-pci-intel-tgl 0000:00:1f.3: Topology: ABI 3:22:1 Kernel ABI 3:23:1 [ 4.872196] skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: Parent card not yet available, widget card binding deferred [ 4.886064] Loading firmware: rtl_nic/rtl8168h-2.fw [ 4.893194] snd_hda_codec_realtek ehdaudio0D0: autoconfig for ALC256: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker [ 4.893197] snd_hda_codec_realtek ehdaudio0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 4.893198] snd_hda_codec_realtek ehdaudio0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0) [ 4.893199] snd_hda_codec_realtek ehdaudio0D0: mono: mono_out=0x0 [ 4.893200] snd_hda_codec_realtek ehdaudio0D0: inputs: [ 4.893201] snd_hda_codec_realtek ehdaudio0D0: Mic=0x19 [ 4.913310] Generic FE-GE Realtek PHY r8169-0-300:00: attached PHY driver (mii_bus:phy_addr=r8169-0-300:00, irq=MAC) [ 4.934208] skl_hda_dsp_generic skl_hda_dsp_generic: hda_dsp_hdmi_build_controls: no PCM in topology for HDMI converter 3 [ 4.952926] input: sof-hda-dsp Mic as /devices/pci0000:00/0000:00:1f.3/skl_hda_dsp_generic/sound/card1/input26 [ 4.952948] input: sof-hda-dsp Headphone as /devices/pci0000:00/0000:00:1f.3/skl_hda_dsp_generic/sound/card1/input27 [ 4.952976] input: sof-hda-dsp HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/skl_hda_dsp_generic/sound/card1/input28 [ 4.952995] input: sof-hda-dsp HDMI/DP,pcm=4 as /devices/pci0000:00/0000:00:1f.3/skl_hda_dsp_generic/sound/card1/input29 [ 4.953016] input: sof-hda-dsp HDMI/DP,pcm=5 as /devices/pci0000:00/0000:00:1f.3/skl_hda_dsp_generic/sound/card1/input30 [ 5.100133] r8169 0000:03:00.0 enp3s0: Link is Down [ 5.264284] iwlwifi 0000:00:14.3: WFPM_UMAC_PD_NOTIFICATION: 0x20 [ 5.264294] iwlwifi 0000:00:14.3: WFPM_LMAC2_PD_NOTIFICATION: 0x1f [ 5.264302] iwlwifi 0000:00:14.3: WFPM_AUTH_KEY_0: 0x90 [ 5.264310] iwlwifi 0000:00:14.3: CNVI_SCU_SEQ_DATA_DW9: 0x0 [ 5.265609] iwlwifi 0000:00:14.3: RFIm is deactivated, reason = 4 [ 5.353700] iwlwifi 0000:00:14.3: Registered PHC clock: iwlwifi-PTP, with index: 0 [ 5.445685] [drm] Initialized nvidia-drm 0.0.0 for 0000:01:00.0 on minor 0 [ 5.573645] iwlwifi 0000:00:14.3: WFPM_UMAC_PD_NOTIFICATION: 0x20 [ 5.573694] iwlwifi 0000:00:14.3: WFPM_LMAC2_PD_NOTIFICATION: 0x1f [ 5.573744] iwlwifi 0000:00:14.3: WFPM_AUTH_KEY_0: 0x90 [ 5.573796] iwlwifi 0000:00:14.3: CNVI_SCU_SEQ_DATA_DW9: 0x0 [ 5.574838] iwlwifi 0000:00:14.3: RFIm is deactivated, reason = 4 [ 5.836868] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 10.052536] iwlwifi 0000:00:14.3: WFPM_UMAC_PD_NOTIFICATION: 0x20 [ 10.052582] iwlwifi 0000:00:14.3: WFPM_LMAC2_PD_NOTIFICATION: 0x1f [ 10.052633] iwlwifi 0000:00:14.3: WFPM_AUTH_KEY_0: 0x90 [ 10.052685] iwlwifi 0000:00:14.3: CNVI_SCU_SEQ_DATA_DW9: 0x0 [ 10.053787] iwlwifi 0000:00:14.3: RFIm is deactivated, reason = 4 [ 10.168615] wlo1: authenticate with XXX (local address=XXX) [ 10.169492] wlo1: send auth to XXX (try 1/3) [ 10.212258] wlo1: authenticated [ 10.216554] wlo1: associate with XXX (try 1/3) [ 10.218149] wlo1: RX AssocResp from XXX (capab=0x1831 status=0 aid=2) [ 10.225702] wlo1: associated [ 10.250278] wlo1: Limiting TX power to 27 (27 - 0) dBm as advertised by XXX [ 124.181692] xt_connbytes: Forcing CT accounting to be enabled [ 844.489849] ACPI Warning: Time parameter 250 us > 100 us violating ACPI spec, please fix the firmware. (20240827/exsystem-142) [ 937.054356] Bluetooth: RFCOMM TTY layer initialized [ 937.054361] Bluetooth: RFCOMM socket layer initialized [ 937.054363] Bluetooth: RFCOMM ver 1.11 [ 937.563477] nvme nvme0: using unchecked data buffer [ 953.023304] usb 1-5: new high-speed USB device number 5 using xhci_hcd [ 953.154119] usb 1-5: New USB device found, idVendor=04b0, idProduct=033b, bcdDevice= 1.10 [ 953.154122] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 953.154123] usb 1-5: Product: NIKON DSC COOLPIX S3500-PTP [ 953.154124] usb 1-5: Manufacturer: NIKON [ 953.154124] usb 1-5: SerialNumber: ... [ 979.608064] usb 1-5: USB disconnect, device number 5 [ 992.660062] usb 1-5: new high-speed USB device number 6 using xhci_hcd [ 992.790891] usb 1-5: New USB device found, idVendor=04b0, idProduct=033b, bcdDevice= 1.10 [ 992.790894] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 992.790895] usb 1-5: Product: NIKON DSC COOLPIX S3500-PTP [ 992.790896] usb 1-5: Manufacturer: NIKON [ 992.790897] usb 1-5: SerialNumber: ... [ 1041.150106] usb 1-5: USB disconnect, device number 6 [ 1052.855022] usb 1-5: new high-speed USB device number 7 using xhci_hcd [ 1052.985791] usb 1-5: New USB device found, idVendor=04b0, idProduct=033b, bcdDevice= 1.10 [ 1052.985795] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 1052.985796] usb 1-5: Product: NIKON DSC COOLPIX S3500-PTP [ 1052.985797] usb 1-5: Manufacturer: NIKON [ 1052.985797] usb 1-5: SerialNumber: ... [ 2646.558116] perf: interrupt took too long (2511 > 2500), lowering kernel.perf_event_max_sample_rate to 79500 [ 2875.118873] perf: interrupt took too long (3225 > 3138), lowering kernel.perf_event_max_sample_rate to 61800 [ 3222.895070] warning: `ThreadPoolForeg' uses wireless extensions which will stop working for Wi-Fi 7 hardware; use nl80211 [ 3264.875107] perf: interrupt took too long (4162 > 4031), lowering kernel.perf_event_max_sample_rate to 48000 [ 3363.317883] atkbd serio0: Unknown key pressed (translated set 2, code 0xc0 on isa0060/serio0). [ 3363.317891] atkbd serio0: Use 'setkeycodes e040 <keycode>' to make it known. [ 3363.321329] msi_wmi: Unknown event received [ 3363.469358] atkbd serio0: Unknown key pressed (translated set 2, code 0xd8 on isa0060/serio0). [ 3363.469366] atkbd serio0: Use 'setkeycodes e058 <keycode>' to make it known. [ 3363.471772] msi_wmi: Unknown event received [ 3363.492602] atkbd serio0: Unknown key released (translated set 2, code 0xd8 on isa0060/serio0). [ 3363.492608] atkbd serio0: Use 'setkeycodes e058 <keycode>' to make it known. [ 3363.652180] atkbd serio0: Unknown key released (translated set 2, code 0xc0 on isa0060/serio0). [ 3363.652187] atkbd serio0: Use 'setkeycodes e040 <keycode>' to make it known. [ 3616.393386] usb 1-5: USB disconnect, device number 7 [ 3617.276651] atkbd serio0: Unknown key pressed (translated set 2, code 0xd8 on isa0060/serio0). [ 3617.276663] atkbd serio0: Use 'setkeycodes e058 <keycode>' to make it known. [ 3617.278460] atkbd serio0: Unknown key released (translated set 2, code 0xd8 on isa0060/serio0). [ 3617.278466] atkbd serio0: Use 'setkeycodes e058 <keycode>' to make it known. [ 3617.282971] msi_wmi: Unknown event received [ 3747.750246] atkbd serio0: Unknown key pressed (translated set 2, code 0xc0 on isa0060/serio0). [ 3747.750252] atkbd serio0: Use 'setkeycodes e040 <keycode>' to make it known. [ 3747.752594] msi_wmi: Unknown event received [ 3747.939082] msi_wmi: Unknown event received [ 3747.955188] atkbd serio0: Unknown key pressed (translated set 2, code 0xd8 on isa0060/serio0). [ 3747.955204] atkbd serio0: Use 'setkeycodes e058 <keycode>' to make it known. [ 3747.956772] atkbd serio0: Unknown key released (translated set 2, code 0xd8 on isa0060/serio0). [ 3747.956788] atkbd serio0: Use 'setkeycodes e058 <keycode>' to make it known. [ 3748.081952] atkbd serio0: Unknown key released (translated set 2, code 0xc0 on isa0060/serio0). [ 3748.081957] atkbd serio0: Use 'setkeycodes e040 <keycode>' to make it known. [ 4520.135996] wlo1: deauthenticating from XXX by local choice (Reason: 3=DEAUTH_LEAVING) [ 4520.495953] iwlwifi 0000:00:14.3: WFPM_UMAC_PD_NOTIFICATION: 0x20 [ 4520.496002] iwlwifi 0000:00:14.3: WFPM_LMAC2_PD_NOTIFICATION: 0x1f [ 4520.496053] iwlwifi 0000:00:14.3: WFPM_AUTH_KEY_0: 0x90 [ 4520.496105] iwlwifi 0000:00:14.3: CNVI_SCU_SEQ_DATA_DW9: 0x0 [ 4520.497306] iwlwifi 0000:00:14.3: RFIm is deactivated, reason = 4 [ 4520.941074] iwlwifi 0000:00:14.3: WFPM_UMAC_PD_NOTIFICATION: 0x20 [ 4520.941123] iwlwifi 0000:00:14.3: WFPM_LMAC2_PD_NOTIFICATION: 0x1f [ 4520.941174] iwlwifi 0000:00:14.3: WFPM_AUTH_KEY_0: 0x90 [ 4520.941225] iwlwifi 0000:00:14.3: CNVI_SCU_SEQ_DATA_DW9: 0x0 [ 4520.942340] iwlwifi 0000:00:14.3: RFIm is deactivated, reason = 4 [ 4522.186133] PM: suspend entry (s2idle) [ 4522.246712] Filesystems sync: 0.060 seconds [ 4522.246950] Loading firmware: iwlwifi-so-a0-gf-a0-89.ucode [ 4522.246964] Loading firmware: iwlwifi-so-a0-gf-a0.pnvm [ 4522.247130] Loading firmware: nvidia/570.169/gsp_ga10x.bin [ 4522.247145] Loading firmware: rtl_nic/rtl8168h-2.fw [ 4522.247203] Loading firmware: regulatory.db.p7s [ 4522.247210] Loading firmware: regulatory.db [ 4522.247221] Loading firmware: intel/ibt-0040-0041.sfi [ 4522.247235] Loading firmware: i915/adlp_dmc.bin [ 4522.247344] Loading firmware: i915/adlp_guc_70.bin [ 4522.247616] Loading firmware: i915/tgl_huc.bin [ 4522.248008] Loading firmware: intel/sof/sof-rpl.ri [ 4522.248093] Loading firmware: intel/sof-tplg/sof-hda-generic-2ch.tplg [ 4522.347326] Freezing user space processes [ 4522.349064] Freezing user space processes completed (elapsed 0.001 seconds) [ 4522.349067] OOM killer disabled. [ 4522.349068] Freezing remaining freezable tasks [ 4522.350238] Freezing remaining freezable tasks completed (elapsed 0.001 seconds) [ 4522.350240] printk: Suspending console(s) (use no_console_suspend to debug) [ 4522.823740] ACPI: EC: interrupt blocked [ 5178.202402] ACPI: EC: interrupt unblocked [ 5178.623670] pcieport 10000:e0:06.0: can't derive routing for PCI INT A [ 5178.623679] nvme 10000:e1:00.0: PCI INT A: no GSI [ 5178.623865] spd5118 1-0050: Failed to write b = 0: -6 [ 5178.623884] spd5118 1-0050: PM: dpm_run_callback(): spd5118_resume [spd5118] returns -6 [ 5178.623906] spd5118 1-0050: PM: failed to resume async: error -6 [ 5178.624086] spd5118 1-0052: Failed to write b = 0: -6 [ 5178.624106] spd5118 1-0052: PM: dpm_run_callback(): spd5118_resume [spd5118] returns -6 [ 5178.624135] spd5118 1-0052: PM: failed to resume async: error -6 [ 5178.634212] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/adlp_guc_70.bin version 70.44.1 [ 5178.634216] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/tgl_huc.bin version 7.9.3 [ 5178.639143] nvme nvme0: D3 entry latency set to 10 seconds [ 5178.649130] i915 0000:00:02.0: [drm] GT0: HuC: authenticated for all workloads [ 5178.649549] i915 0000:00:02.0: [drm] GT0: GUC: submission enabled [ 5178.649552] i915 0000:00:02.0: [drm] GT0: GUC: SLPC enabled [ 5178.650052] i915 0000:00:02.0: [drm] GT0: GUC: RC enabled [ 5178.677075] nvme nvme0: 16/0/0 default/read/poll queues [ 5179.033763] mei_hdcp 0000:00:16.0-HASH_6A4-F9B6-59CA-B5B6-70CADF8C6425: bound 0000:00:02.0 (ops i915_hdcp_ops [i915]) [ 5179.035465] mei_pxp 0000:00:16.0-HASH_CB2-4920-52D1-D0DC-7EB0C5A0EBDF: bound 0000:00:02.0 (ops i915_pxp_tee_component_ops [i915]) [ 5179.036523] OOM killer enabled. [ 5179.036531] Restarting tasks ... done. [ 5179.042411] random: crng reseeded on system resumption [ 5179.168317] PM: suspend exit [ 5180.255807] Generic FE-GE Realtek PHY r8169-0-300:00: attached PHY driver (mii_bus:phy_addr=r8169-0-300:00, irq=MAC) [ 5180.432721] r8169 0000:03:00.0 enp3s0: Link is Down [ 5180.660822] iwlwifi 0000:00:14.3: WFPM_UMAC_PD_NOTIFICATION: 0x20 [ 5180.660874] iwlwifi 0000:00:14.3: WFPM_LMAC2_PD_NOTIFICATION: 0x1f [ 5180.660924] iwlwifi 0000:00:14.3: WFPM_AUTH_KEY_0: 0x90 [ 5180.660978] iwlwifi 0000:00:14.3: CNVI_SCU_SEQ_DATA_DW9: 0x0 [ 5180.662170] iwlwifi 0000:00:14.3: RFIm is deactivated, reason = 4 [ 5185.123452] iwlwifi 0000:00:14.3: WFPM_UMAC_PD_NOTIFICATION: 0x20 [ 5185.123463] iwlwifi 0000:00:14.3: WFPM_LMAC2_PD_NOTIFICATION: 0x1f [ 5185.123471] iwlwifi 0000:00:14.3: WFPM_AUTH_KEY_0: 0x90 [ 5185.123478] iwlwifi 0000:00:14.3: CNVI_SCU_SEQ_DATA_DW9: 0x0 [ 5185.124838] iwlwifi 0000:00:14.3: RFIm is deactivated, reason = 4 [ 5185.284491] wlo1: authenticate with XXX (local address=XXX) [ 5185.285380] wlo1: send auth to XXX (try 1/3) [ 5185.328578] wlo1: authenticated [ 5185.329168] wlo1: associate with XXX (try 1/3) [ 5185.330833] wlo1: RX AssocResp from XXX (capab=0x1831 status=0 aid=2) [ 5185.338722] wlo1: associated [ 5185.429295] wlo1: Limiting TX power to 27 (27 - 0) dBm as advertised by XXX [ 5309.147245] usb 1-5: new high-speed USB device number 8 using xhci_hcd [ 5309.281338] usb 1-5: New USB device found, idVendor=04b0, idProduct=033b, bcdDevice= 1.10 [ 5309.281344] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 5309.281352] usb 1-5: Product: NIKON DSC COOLPIX S3500-PTP [ 5309.281354] usb 1-5: Manufacturer: NIKON [ 5309.281355] usb 1-5: SerialNumber: ... [ 6532.039234] input: ... (AVRCP) as /devices/virtual/input/input33 [ 6585.638659] usb 1-5: USB disconnect, device number 8 [ 6644.546016] usb 2-2: new SuperSpeed USB device number 2 using xhci_hcd [ 6644.560252] usb 2-2: New USB device found, idVendor=152d, idProduct=0562, bcdDevice=32.02 [ 6644.560265] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 6644.560270] usb 2-2: Product: USB3.0 Super Speed [ 6644.560273] usb 2-2: Manufacturer: USB3.0 Super Speed [ 6644.560277] usb 2-2: SerialNumber: ... [ 6644.595011] usbcore: registered new interface driver usb-storage [ 6644.602421] scsi host0: uas [ 6644.602544] usbcore: registered new interface driver uas [ 6644.602944] scsi 0:0:0:0: Direct-Access USB3.0 Super Speed 3202 PQ: 0 ANSI: 6 [ 6644.606717] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 6644.606736] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 6644.606861] sd 0:0:0:0: [sda] Write Protect is off [ 6644.606862] sd 0:0:0:0: [sda] Mode Sense: 53 00 00 08 [ 6644.607145] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 6644.659467] sd 0:0:0:0: [sda] Preferred minimum I/O size 4096 bytes [ 6644.659476] sd 0:0:0:0: [sda] Optimal transfer size 33553920 bytes not a multiple of preferred minimum block size (4096 bytes) [ 6644.697077] sda: sda1 [ 6644.697406] sd 0:0:0:0: [sda] Attached SCSI disk [ 6648.199833] exFAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 7287.069433] nvidia_uvm: module uses symbols nvUvmInterfaceDupAddressSpace from proprietary module nvidia, inheriting taint. [ 7777.034730] atkbd serio0: Unknown key pressed (translated set 2, code 0xc0 on isa0060/serio0). [ 7777.034737] atkbd serio0: Use 'setkeycodes e040 <keycode>' to make it known. [ 7777.041979] msi_wmi: Unknown event received [ 7777.121599] msi_wmi: Unknown event received [ 7777.217305] atkbd serio0: Unknown key released (translated set 2, code 0xc0 on isa0060/serio0). [ 7777.217311] atkbd serio0: Use 'setkeycodes e040 <keycode>' to make it known. [11785.271706] sda: [11785.304216] sda: [12368.449905] sda: sda1 [12371.336641] sda: sda1 [12903.729394] EXT4-fs (sda1): mounted filesystem HASH_98C-58DC-6719-5390-9883B3D5B396 r/w with ordered data mode. Quota mode: none. [13054.488929] EXT4-fs (sda1): unmounting filesystem HASH_98C-58DC-6719-5390-9883B3D5B396. [13054.695461] sd 0:0:0:0: [sda] Synchronizing SCSI cache [13055.015439] sd 0:0:0:0: [sda] Synchronize Cache(10) failed: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK [13055.055507] usb 2-2: USB disconnect, device number 2 [13061.582429] usb 2-2: new SuperSpeed USB device number 3 using xhci_hcd [13061.596744] usb 2-2: New USB device found, idVendor=152d, idProduct=0562, bcdDevice=32.02 [13061.596747] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [13061.596748] usb 2-2: Product: USB3.0 Super Speed [13061.596749] usb 2-2: Manufacturer: USB3.0 Super Speed [13061.596750] usb 2-2: SerialNumber: ... [13061.600602] scsi host0: uas [13061.601107] scsi 0:0:0:0: Direct-Access USB3.0 Super Speed 3202 PQ: 0 ANSI: 6 [13061.604405] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [13061.604407] sd 0:0:0:0: [sda] 4096-byte physical blocks [13061.604561] sd 0:0:0:0: [sda] Write Protect is off [13061.604562] sd 0:0:0:0: [sda] Mode Sense: 53 00 00 08 [13061.604844] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [13061.652561] sd 0:0:0:0: [sda] Preferred minimum I/O size 4096 bytes [13061.652564] sd 0:0:0:0: [sda] Optimal transfer size 33553920 bytes not a multiple of preferred minimum block size (4096 bytes) [13061.687007] sda: sda1 [13061.687107] sd 0:0:0:0: [sda] Attached SCSI disk [13063.514279] EXT4-fs (sda1): mounted filesystem HASH_98C-58DC-6719-5390-9883B3D5B396 r/w with ordered data mode. Quota mode: none. [13083.556838] EXT4-fs (sda1): unmounting filesystem HASH_98C-58DC-6719-5390-9883B3D5B396. [13083.652482] sd 0:0:0:0: [sda] Synchronizing SCSI cache [13083.932462] sd 0:0:0:0: [sda] Synchronize Cache(10) failed: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK [13083.979188] usb 2-2: USB disconnect, device number 3 [13104.696102] usb 2-2: new SuperSpeed USB device number 4 using xhci_hcd [13104.710528] usb 2-2: New USB device found, idVendor=152d, idProduct=0562, bcdDevice=32.02 [13104.710531] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [13104.710532] usb 2-2: Product: USB3.0 Super Speed [13104.710533] usb 2-2: Manufacturer: USB3.0 Super Speed [13104.710534] usb 2-2: SerialNumber: ... [13104.714467] scsi host0: uas [13104.715376] scsi 0:0:0:0: Direct-Access USB3.0 Super Speed 3202 PQ: 0 ANSI: 6 [13104.718657] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [13104.718674] sd 0:0:0:0: [sda] 4096-byte physical blocks [13104.718824] sd 0:0:0:0: [sda] Write Protect is off [13104.718825] sd 0:0:0:0: [sda] Mode Sense: 53 00 00 08 [13104.719108] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [13104.769671] sd 0:0:0:0: [sda] Preferred minimum I/O size 4096 bytes [13104.769674] sd 0:0:0:0: [sda] Optimal transfer size 33553920 bytes not a multiple of preferred minimum block size (4096 bytes) [13104.796918] sda: sda1 [13104.797021] sd 0:0:0:0: [sda] Attached SCSI disk [13132.578201] sda: [13173.991554] sda: sda1 [13176.918739] sda: sda1 [13177.644970] EXT4-fs (sda1): mounted filesystem HASH_40F-33F0-9857-24D7-C238E99777D1 r/w with ordered data mode. Quota mode: none. [13177.651064] EXT4-fs (sda1): unmounting filesystem HASH_40F-33F0-9857-24D7-C238E99777D1. [13181.954649] EXT4-fs (sda1): mounted filesystem HASH_40F-33F0-9857-24D7-C238E99777D1 r/w with ordered data mode. Quota mode: none. [15889.398672] EXT4-fs (sda1): unmounting filesystem HASH_40F-33F0-9857-24D7-C238E99777D1. [15973.111547] EXT4-fs (sda1): mounted filesystem HASH_40F-33F0-9857-24D7-C238E99777D1 r/w with ordered data mode. Quota mode: none. [15975.141435] EXT4-fs (sda1): unmounting filesystem HASH_40F-33F0-9857-24D7-C238E99777D1. [15975.259249] sd 0:0:0:0: [sda] Synchronizing SCSI cache [15975.562634] sd 0:0:0:0: [sda] Synchronize Cache(10) failed: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK [15975.599321] usb 2-2: USB disconnect, device number 4 [16010.402533] usb 2-2: new SuperSpeed USB device number 5 using xhci_hcd [16010.416625] usb 2-2: New USB device found, idVendor=152d, idProduct=0562, bcdDevice=32.02 [16010.416628] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [16010.416630] usb 2-2: Product: USB3.0 Super Speed [16010.416631] usb 2-2: Manufacturer: USB3.0 Super Speed [16010.416632] usb 2-2: SerialNumber: ... [16010.420638] scsi host0: uas [16010.421197] scsi 0:0:0:0: Direct-Access USB3.0 Super Speed 3202 PQ: 0 ANSI: 6 [16010.484000] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [16010.484004] sd 0:0:0:0: [sda] 4096-byte physical blocks [16010.484150] sd 0:0:0:0: [sda] Write Protect is off [16010.484152] sd 0:0:0:0: [sda] Mode Sense: 53 00 00 08 [16010.484417] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [16010.522650] sd 0:0:0:0: [sda] Preferred minimum I/O size 4096 bytes [16010.522651] sd 0:0:0:0: [sda] Optimal transfer size 33553920 bytes not a multiple of preferred minimum block size (4096 bytes) [16010.539543] sda: sda1 [16010.539685] sd 0:0:0:0: [sda] Attached SCSI disk [16794.195063] sd 0:0:0:0: [sda] Synchronizing SCSI cache [16794.535111] sd 0:0:0:0: [sda] Synchronize Cache(10) failed: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK [16794.573706] usb 2-2: USB disconnect, device number 5 [16804.257150] usb 1-1: USB disconnect, device number 2 [16805.918433] usb 1-5: new low-speed USB device number 9 using xhci_hcd [16806.055662] usb 1-5: New USB device found, idVendor=30fa, idProduct=1040, bcdDevice= 1.00 [16806.055665] usb 1-5: New USB device strings: Mfr=2, Product=1, SerialNumber=... [16806.055666] usb 1-5: Product: USB GAMING MOUSE [16806.055667] usb 1-5: Manufacturer: INSTANT [16806.058464] input: INSTANT USB GAMING MOUSE as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/0003:30FA:1040.0005/input/input34 [16806.058523] hid-generic 0003:30FA:1040.0005: input,hidraw0: USB HID v1.10 Mouse [INSTANT USB GAMING MOUSE ] on usb-0000:00:14.0-5/input0 [16806.061550] input: INSTANT USB GAMING MOUSE Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.1/0003:30FA:1040.0006/input/input35 [16806.111840] hid-generic 0003:30FA:1040.0006: input,hiddev96,hidraw1: USB HID v1.10 Keyboard [INSTANT USB GAMING MOUSE ] on usb-0000:00:14.0-5/input1 [16812.908530] usb 1-1: new full-speed USB device number 10 using xhci_hcd [16813.025208] usb 1-1: device descriptor read/64, error -71 [16813.245232] usb 1-1: device descriptor read/64, error -71 [16813.468543] usb 1-1: new full-speed USB device number 11 using xhci_hcd [16813.585276] usb 1-1: device descriptor read/64, error -71 [16813.805284] usb 1-1: device descriptor read/64, error -71 [16813.908637] usb usb1-port1: attempt power cycle [16814.298531] usb 1-1: new full-speed USB device number 12 using xhci_hcd [16814.298679] usb 1-1: Device not responding to setup address. [16814.502092] usb 1-1: Device not responding to setup address. [16814.705192] usb 1-1: device not accepting address 12, error -71 [16814.705236] usb 1-1: WARN: invalid context state for evaluate context command. [16814.825208] usb 1-1: new full-speed USB device number 13 using xhci_hcd [16814.825359] usb 1-1: Device not responding to setup address. [16815.028707] usb 1-1: Device not responding to setup address. [16815.231808] usb 1-1: device not accepting address 13, error -71 [16815.231849] usb 1-1: WARN: invalid context state for evaluate context command. [16815.231889] usb usb1-port1: unable to enumerate USB device [16924.705298] usb 1-1: new full-speed USB device number 14 using xhci_hcd [16924.825313] usb 1-1: device descriptor read/64, error -71 [16925.048677] usb 1-1: device descriptor read/64, error -71 [16925.271993] usb 1-1: new full-speed USB device number 15 using xhci_hcd [16925.388584] usb 1-1: device descriptor read/64, error -71 [16925.608684] usb 1-1: device descriptor read/64, error -71 [16925.712055] usb usb1-port1: attempt power cycle [16926.098775] usb 1-1: new full-speed USB device number 16 using xhci_hcd [16926.098946] usb 1-1: Device not responding to setup address. [16926.305350] usb 1-1: Device not responding to setup address. [16926.508676] usb 1-1: device not accepting address 16, error -71 [16926.508720] usb 1-1: WARN: invalid context state for evaluate context command. [16926.625257] usb 1-1: new full-speed USB device number 17 using xhci_hcd [16926.625485] usb 1-1: Device not responding to setup address. [16926.828826] usb 1-1: Device not responding to setup address. [16927.035264] usb 1-1: device not accepting address 17, error -71 [16927.035307] usb 1-1: WARN: invalid context state for evaluate context command. [16927.035354] usb usb1-port1: unable to enumerate USB device [16970.827773] usb 1-5: USB disconnect, device number 9 [16972.468775] usb 1-1: new low-speed USB device number 18 using xhci_hcd [16972.606294] usb 1-1: New USB device found, idVendor=30fa, idProduct=1040, bcdDevice= 1.00 [16972.606297] usb 1-1: New USB device strings: Mfr=2, Product=1, SerialNumber=... [16972.606299] usb 1-1: Product: USB GAMING MOUSE [16972.606300] usb 1-1: Manufacturer: INSTANT [16972.609147] input: INSTANT USB GAMING MOUSE as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/0003:30FA:1040.0007/input/input37 [16972.609206] hid-generic 0003:30FA:1040.0007: input,hidraw0: USB HID v1.10 Mouse [INSTANT USB GAMING MOUSE ] on usb-0000:00:14.0-1/input0 [16972.612110] input: INSTANT USB GAMING MOUSE Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.1/0003:30FA:1040.0008/input/input38 [16972.665580] hid-generic 0003:30FA:1040.0008: input,hiddev96,hidraw1: USB HID v1.10 Keyboard [INSTANT USB GAMING MOUSE ] on usb-0000:00:14.0-1/input1 [16977.952102] usb 1-5: new full-speed USB device number 19 using xhci_hcd [16978.068599] usb 1-5: device descriptor read/64, error -71 [16978.288713] usb 1-5: device descriptor read/64, error -71 [16978.508737] usb 1-5: new full-speed USB device number 20 using xhci_hcd [16978.625382] usb 1-5: device descriptor read/64, error -71 [16978.852006] usb 1-5: device descriptor read/64, error -71 [16978.955506] usb usb1-port5: attempt power cycle [16979.351944] usb 1-5: new full-speed USB device number 21 using xhci_hcd [16979.352583] usb 1-5: Device not responding to setup address. [16979.555604] usb 1-5: Device not responding to setup address. [16979.761930] usb 1-5: device not accepting address 21, error -71 [16979.762004] usb 1-5: WARN: invalid context state for evaluate context command. [16979.878705] usb 1-5: new full-speed USB device number 22 using xhci_hcd [16979.878862] usb 1-5: Device not responding to setup address. [16980.085344] usb 1-5: Device not responding to setup address. [16980.288679] usb 1-5: device not accepting address 22, error -71 [16980.288725] usb 1-5: WARN: invalid context state for evaluate context command. [16980.288828] usb usb1-port5: unable to enumerate USB device [17025.568801] usb 2-2: new SuperSpeed USB device number 6 using xhci_hcd [17025.583173] usb 2-2: New USB device found, idVendor=152d, idProduct=0562, bcdDevice=32.02 [17025.583176] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [17025.583178] usb 2-2: Product: USB3.0 Super Speed [17025.583178] usb 2-2: Manufacturer: USB3.0 Super Speed [17025.583179] usb 2-2: SerialNumber: ... [17025.587233] scsi host0: uas [17025.587649] scsi 0:0:0:0: Direct-Access USB3.0 Super Speed 3202 PQ: 0 ANSI: 6 [17025.671616] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [17025.671620] sd 0:0:0:0: [sda] 4096-byte physical blocks [17025.671779] sd 0:0:0:0: [sda] Write Protect is off [17025.671780] sd 0:0:0:0: [sda] Mode Sense: 53 00 00 08 [17025.672062] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [17025.722256] sd 0:0:0:0: [sda] Preferred minimum I/O size 4096 bytes [17025.722259] sd 0:0:0:0: [sda] Optimal transfer size 33553920 bytes not a multiple of preferred minimum block size (4096 bytes) [17025.752479] sda: sda1 [17025.752591] sd 0:0:0:0: [sda] Attached SCSI disk [17033.058714] usb 2-2: USB disconnect, device number 6 [17033.138595] sd 0:0:0:0: [sda] Synchronizing SCSI cache [17033.435297] sd 0:0:0:0: [sda] Synchronize Cache(10) failed: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK [17047.338741] usb 1-4: new full-speed USB device number 23 using xhci_hcd [17047.455392] usb 1-4: device descriptor read/64, error -71 [17047.685377] usb 1-4: device descriptor read/64, error -71 [17047.908719] usb 1-4: new full-speed USB device number 24 using xhci_hcd [17048.025298] usb 1-4: device descriptor read/64, error -71 [17048.251918] usb 1-4: device descriptor read/64, error -71 [17048.355433] usb usb1-port4: attempt power cycle [17048.742033] usb 1-4: new full-speed USB device number 25 using xhci_hcd [17048.742140] usb 1-4: Device not responding to setup address. [17048.945498] usb 1-4: Device not responding to setup address. [17049.148685] usb 1-4: device not accepting address 25, error -71 [17049.148720] usb 1-4: WARN: invalid context state for evaluate context command. [17049.265378] usb 1-4: new full-speed USB device number 26 using xhci_hcd [17049.265533] usb 1-4: Device not responding to setup address. [17049.472052] usb 1-4: Device not responding to setup address. [17049.675258] usb 1-4: device not accepting address 26, error -71 [17049.675307] usb 1-4: WARN: invalid context state for evaluate context command. [17049.675351] usb usb1-port4: unable to enumerate USB device [17087.745298] usb 2-2: new SuperSpeed USB device number 7 using xhci_hcd [17087.762803] usb 2-2: New USB device found, idVendor=152d, idProduct=0562, bcdDevice=32.02 [17087.762805] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [17087.762807] usb 2-2: Product: USB3.0 Super Speed [17087.762808] usb 2-2: Manufacturer: USB3.0 Super Speed [17087.762808] usb 2-2: SerialNumber: ... [17087.766794] scsi host0: uas [17087.767209] scsi 0:0:0:0: Direct-Access USB3.0 Super Speed 3202 PQ: 0 ANSI: 6 [17087.822317] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [17087.822326] sd 0:0:0:0: [sda] 4096-byte physical blocks [17087.822485] sd 0:0:0:0: [sda] Write Protect is off [17087.822486] sd 0:0:0:0: [sda] Mode Sense: 53 00 00 08 [17087.822752] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [17087.868878] sd 0:0:0:0: [sda] Preferred minimum I/O size 4096 bytes [17087.868880] sd 0:0:0:0: [sda] Optimal transfer size 33553920 bytes not a multiple of preferred minimum block size (4096 bytes) [17087.892216] sda: sda1 [17087.892260] sd 0:0:0:0: [sda] Attached SCSI disk [18222.510603] sd 0:0:0:0: [sda] Synchronizing SCSI cache [18222.810577] sd 0:0:0:0: [sda] Synchronize Cache(10) failed: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK [18222.857403] usb 2-2: USB disconnect, device number 7 [18226.248240] wlo1: deauthenticating from XXX by local choice (Reason: 3=DEAUTH_LEAVING) [18226.618860] iwlwifi 0000:00:14.3: WFPM_UMAC_PD_NOTIFICATION: 0x20 [18226.618907] iwlwifi 0000:00:14.3: WFPM_LMAC2_PD_NOTIFICATION: 0x1f [18226.618917] iwlwifi 0000:00:14.3: WFPM_AUTH_KEY_0: 0x90 [18226.618927] iwlwifi 0000:00:14.3: CNVI_SCU_SEQ_DATA_DW9: 0x0 [18226.620284] iwlwifi 0000:00:14.3: RFIm is deactivated, reason = 4 [18227.051587] iwlwifi 0000:00:14.3: WFPM_UMAC_PD_NOTIFICATION: 0x20 [18227.051635] iwlwifi 0000:00:14.3: WFPM_LMAC2_PD_NOTIFICATION: 0x1f [18227.051643] iwlwifi 0000:00:14.3: WFPM_AUTH_KEY_0: 0x90 [18227.051651] iwlwifi 0000:00:14.3: CNVI_SCU_SEQ_DATA_DW9: 0x0 [18227.052976] iwlwifi 0000:00:14.3: RFIm is deactivated, reason = 4 [18227.892074] PM: suspend entry (s2idle) [18227.936779] Filesystems sync: 0.044 seconds [18227.936952] Loading firmware: iwlwifi-so-a0-gf-a0-89.ucode [18227.937059] Loading firmware: iwlwifi-so-a0-gf-a0.pnvm [18227.937164] Loading firmware: nvidia/570.169/gsp_ga10x.bin [18227.937167] Loading firmware: rtl_nic/rtl8168h-2.fw [18227.937189] Loading firmware: regulatory.db [18227.937225] Loading firmware: regulatory.db.p7s [18227.937232] Loading firmware: intel/ibt-0040-0041.sfi [18227.937269] Loading firmware: i915/adlp_guc_70.bin [18227.937270] Loading firmware: i915/adlp_dmc.bin [18227.937312] Loading firmware: i915/tgl_huc.bin [18227.937320] Loading firmware: intel/sof/sof-rpl.ri [18227.937353] Loading firmware: intel/sof-tplg/sof-hda-generic-2ch.tplg [18228.027377] Freezing user space processes [18228.029157] Freezing user space processes completed (elapsed 0.001 seconds) [18228.029160] OOM killer disabled. [18228.029160] Freezing remaining freezable tasks [18228.030328] Freezing remaining freezable tasks completed (elapsed 0.001 seconds) [18228.030330] printk: Suspending console(s) (use no_console_suspend to debug) [18228.606895] ACPI: EC: interrupt blocked [19787.856731] ACPI: EC: interrupt unblocked [19788.273621] pcieport 10000:e0:06.0: can't derive routing for PCI INT A [19788.273624] nvme 10000:e1:00.0: PCI INT A: no GSI [19788.273899] spd5118 1-0050: Failed to write b = 0: -6 [19788.273916] spd5118 1-0050: PM: dpm_run_callback(): spd5118_resume [spd5118] returns -6 [19788.273937] spd5118 1-0050: PM: failed to resume async: error -6 [19788.274096] spd5118 1-0052: Failed to write b = 0: -6 [19788.274113] spd5118 1-0052: PM: dpm_run_callback(): spd5118_resume [spd5118] returns -6 [19788.274133] spd5118 1-0052: PM: failed to resume async: error -6 [19788.283231] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/adlp_guc_70.bin version 70.44.1 [19788.283235] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/tgl_huc.bin version 7.9.3 [19788.287962] nvme nvme0: D3 entry latency set to 10 seconds [19788.296452] i915 0000:00:02.0: [drm] GT0: HuC: authenticated for all workloads [19788.296948] i915 0000:00:02.0: [drm] GT0: GUC: submission enabled [19788.296960] i915 0000:00:02.0: [drm] GT0: GUC: SLPC enabled [19788.297455] i915 0000:00:02.0: [drm] GT0: GUC: RC enabled [19788.325818] nvme nvme0: 16/0/0 default/read/poll queues [19788.683684] mei_hdcp 0000:00:16.0-HASH_6A4-F9B6-59CA-B5B6-70CADF8C6425: bound 0000:00:02.0 (ops i915_hdcp_ops [i915]) [19788.685333] mei_pxp 0000:00:16.0-HASH_CB2-4920-52D1-D0DC-7EB0C5A0EBDF: bound 0000:00:02.0 (ops i915_pxp_tee_component_ops [i915]) [19788.687138] OOM killer enabled. [19788.687144] Restarting tasks ... done. [19788.695517] random: crng reseeded on system resumption [19788.823329] PM: suspend exit [19789.903160] Generic FE-GE Realtek PHY r8169-0-300:00: attached PHY driver (mii_bus:phy_addr=r8169-0-300:00, irq=MAC) [19790.076586] r8169 0000:03:00.0 enp3s0: Link is Down [19790.280249] iwlwifi 0000:00:14.3: WFPM_UMAC_PD_NOTIFICATION: 0x20 [19790.280300] iwlwifi 0000:00:14.3: WFPM_LMAC2_PD_NOTIFICATION: 0x1f [19790.280354] iwlwifi 0000:00:14.3: WFPM_AUTH_KEY_0: 0x90 [19790.280405] iwlwifi 0000:00:14.3: CNVI_SCU_SEQ_DATA_DW9: 0x0 [19790.281526] iwlwifi 0000:00:14.3: RFIm is deactivated, reason = 4 [19794.083698] atkbd serio0: Unknown key pressed (translated set 2, code 0xc0 on isa0060/serio0). [19794.083704] atkbd serio0: Use 'setkeycodes e040 <keycode>' to make it known. [19794.087948] msi_wmi: Unknown event received [19794.310753] msi_wmi: Unknown event received [19794.411256] atkbd serio0: Unknown key released (translated set 2, code 0xc0 on isa0060/serio0). [19794.411263] atkbd serio0: Use 'setkeycodes e040 <keycode>' to make it known. [19796.571354] iwlwifi 0000:00:14.3: WFPM_UMAC_PD_NOTIFICATION: 0x20 [19796.571364] iwlwifi 0000:00:14.3: WFPM_LMAC2_PD_NOTIFICATION: 0x1f [19796.571373] iwlwifi 0000:00:14.3: WFPM_AUTH_KEY_0: 0x90 [19796.571380] iwlwifi 0000:00:14.3: CNVI_SCU_SEQ_DATA_DW9: 0x0 [19796.572678] iwlwifi 0000:00:14.3: RFIm is deactivated, reason = 4 [19796.707862] wlo1: authenticate with XXX (local address=XXX) [19796.708751] wlo1: send auth to XXX (try 1/3) [19796.751669] wlo1: authenticated [19796.756475] wlo1: associate with XXX (try 1/3) [19796.758026] wlo1: RX AssocResp from XXX (capab=0x1831 status=0 aid=2) [19796.765454] wlo1: associated [19796.838236] wlo1: Limiting TX power to 27 (27 - 0) dBm as advertised by XXX [20872.136320] input: ... (AVRCP) as /devices/virtual/input/input42 [21281.515264] usb 2-1: new SuperSpeed USB device number 8 using xhci_hcd [21281.532561] usb 2-1: New USB device found, idVendor=0781, idProduct=55b1, bcdDevice= 1.10 [21281.532563] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [21281.532565] usb 2-1: Product: SanDisk 3.2 Gen1 [21281.532565] usb 2-1: Manufacturer: SanDisk [21281.532566] usb 2-1: SerialNumber: ... [21281.534755] usb-storage 2-1:1.0: USB Mass Storage device detected [21281.534975] scsi host0: usb-storage 2-1:1.0 [21282.557295] scsi 0:0:0:0: Direct-Access SanDisk SanDisk 3.2 Gen1 DL17 PQ: 0 ANSI: 6 [21282.634155] sd 0:0:0:0: [sda] 244457472 512-byte logical blocks: (125 GB/117 GiB) [21282.634343] sd 0:0:0:0: [sda] Write Protect is off [21282.634345] sd 0:0:0:0: [sda] Mode Sense: 45 00 00 00 [21282.634508] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [21282.689155] sda: sda1 sda2 [21282.689472] sd 0:0:0:0: [sda] Attached SCSI removable disk [23857.810515] exFAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [23981.693148] sda: detected capacity change from 244457472 to 0 [23989.087850] usb 2-1: USB disconnect, device number 8 [24002.071167] usb 2-1: new SuperSpeed USB device number 9 using xhci_hcd [24002.085208] usb 2-1: New USB device found, idVendor=0781, idProduct=55b1, bcdDevice= 1.10 [24002.085212] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [24002.085213] usb 2-1: Product: SanDisk 3.2 Gen1 [24002.085214] usb 2-1: Manufacturer: SanDisk [24002.085215] usb 2-1: SerialNumber: ... [24002.087185] usb-storage 2-1:1.0: USB Mass Storage device detected [24002.087499] scsi host0: usb-storage 2-1:1.0 [24003.088574] scsi 0:0:0:0: Direct-Access SanDisk SanDisk 3.2 Gen1 DL17 PQ: 0 ANSI: 6 [24003.205592] sd 0:0:0:0: [sda] 244457472 512-byte logical blocks: (125 GB/117 GiB) [24003.205857] sd 0:0:0:0: [sda] Write Protect is off [24003.205859] sd 0:0:0:0: [sda] Mode Sense: 45 00 00 00 [24003.206032] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [24003.225289] sda: sda1 sda2 [24003.225642] sd 0:0:0:0: [sda] Attached SCSI removable disk [24008.603248] exFAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [24033.409198] sda: detected capacity change from 244457472 to 0 [24035.974523] usb 2-1: USB disconnect, device number 9 [24412.083707] usb 1-5: new high-speed USB device number 27 using xhci_hcd [24412.214485] usb 1-5: New USB device found, idVendor=0781, idProduct=5567, bcdDevice= 2.01 [24412.214489] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=... [24412.214491] usb 1-5: Product: Cruzer Blade [24412.214492] usb 1-5: Manufacturer: SanDisk [24412.214492] usb 1-5: SerialNumber: ... [24412.215550] usb-storage 1-5:1.0: USB Mass Storage device detected [24412.215898] scsi host0: usb-storage 1-5:1.0 [24413.224637] scsi 0:0:0:0: Direct-Access SanDisk Cruzer Blade 2.01 PQ: 0 ANSI: 6 [24413.235937] sd 0:0:0:0: [sda] 7821312 512-byte logical blocks: (4.00 GB/3.73 GiB) [24413.238161] sd 0:0:0:0: [sda] Write Protect is off [24413.238163] sd 0:0:0:0: [sda] Mode Sense: 43 00 00 00 [24413.238470] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [24413.274687] sda: sda1 sda2 [24413.274774] sd 0:0:0:0: [sda] Attached SCSI disk [25195.295693] sda: sda1 sda2 [25204.133690] usb 1-5: USB disconnect, device number 27 [26111.391716] usb 1-5: new high-speed USB device number 28 using xhci_hcd [26111.525567] usb 1-5: New USB device found, idVendor=0781, idProduct=5567, bcdDevice= 2.01 [26111.525571] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=... [26111.525572] usb 1-5: Product: Cruzer Blade [26111.525573] usb 1-5: Manufacturer: SanDisk [26111.525574] usb 1-5: SerialNumber: ... [26111.526994] usb-storage 1-5:1.0: USB Mass Storage device detected [26111.527130] scsi host0: usb-storage 1-5:1.0 [26112.532572] scsi 0:0:0:0: Direct-Access SanDisk Cruzer Blade 2.01 PQ: 0 ANSI: 6 [26112.542929] sd 0:0:0:0: [sda] 7821312 512-byte logical blocks: (4.00 GB/3.73 GiB) [26112.544175] sd 0:0:0:0: [sda] Write Protect is off [26112.544177] sd 0:0:0:0: [sda] Mode Sense: 43 00 00 00 [26112.544500] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [26112.584136] sda: sda1 sda2 sda3 [26112.584249] sd 0:0:0:0: [sda] Attached SCSI disk [26429.876243] sda: sda1 sda2 [27150.412293] wlo1: deauthenticating from XXX by local choice (Reason: 3=DEAUTH_LEAVING) [27150.776340] iwlwifi 0000:00:14.3: WFPM_UMAC_PD_NOTIFICATION: 0x20 [27150.776390] iwlwifi 0000:00:14.3: WFPM_LMAC2_PD_NOTIFICATION: 0x1f [27150.776440] iwlwifi 0000:00:14.3: WFPM_AUTH_KEY_0: 0x90 [27150.776539] iwlwifi 0000:00:14.3: CNVI_SCU_SEQ_DATA_DW9: 0x0 [27150.777696] iwlwifi 0000:00:14.3: RFIm is deactivated, reason = 4 [27151.223964] iwlwifi 0000:00:14.3: WFPM_UMAC_PD_NOTIFICATION: 0x20 [27151.224010] iwlwifi 0000:00:14.3: WFPM_LMAC2_PD_NOTIFICATION: 0x1f [27151.224060] iwlwifi 0000:00:14.3: WFPM_AUTH_KEY_0: 0x90 [27151.224112] iwlwifi 0000:00:14.3: CNVI_SCU_SEQ_DATA_DW9: 0x0 [27151.227615] iwlwifi 0000:00:14.3: RFIm is deactivated, reason = 4 [27152.503608] PM: suspend entry (s2idle) [27152.542903] Filesystems sync: 0.039 seconds [27152.542992] Loading firmware: iwlwifi-so-a0-gf-a0-89.ucode [27152.543092] Loading firmware: iwlwifi-so-a0-gf-a0.pnvm [27152.543105] Loading firmware: nvidia/570.169/gsp_ga10x.bin [27152.543215] Loading firmware: rtl_nic/rtl8168h-2.fw [27152.543238] Loading firmware: regulatory.db.p7s [27152.543238] Loading firmware: intel/ibt-0040-0041.sfi [27152.543239] Loading firmware: i915/adlp_dmc.bin [27152.543236] Loading firmware: regulatory.db [27152.543241] Loading firmware: i915/adlp_guc_70.bin [27152.543256] Loading firmware: i915/tgl_huc.bin [27152.543260] Loading firmware: intel/sof/sof-rpl.ri [27152.543376] Loading firmware: intel/sof-tplg/sof-hda-generic-2ch.tplg [27152.625890] Freezing user space processes [27152.627739] Freezing user space processes completed (elapsed 0.001 seconds) [27152.627742] OOM killer disabled. [27152.627743] Freezing remaining freezable tasks [27152.628936] Freezing remaining freezable tasks completed (elapsed 0.001 seconds) [27152.628937] printk: Suspending console(s) (use no_console_suspend to debug) [27153.154335] ACPI: EC: interrupt blocked [27227.145922] ACPI: EC: interrupt unblocked [27227.584745] pcieport 10000:e0:06.0: can't derive routing for PCI INT A [27227.584764] nvme 10000:e1:00.0: PCI INT A: no GSI [27227.584978] spd5118 1-0050: PM: dpm_run_callback(): spd5118_resume [spd5118] returns -6 [27227.585013] spd5118 1-0050: PM: failed to resume async: error -6 [27227.585237] spd5118 1-0052: PM: dpm_run_callback(): spd5118_resume [spd5118] returns -6 [27227.585265] spd5118 1-0052: PM: failed to resume async: error -6 [27227.596279] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/adlp_guc_70.bin version 70.44.1 [27227.596282] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/tgl_huc.bin version 7.9.3 [27227.603755] nvme nvme0: D3 entry latency set to 10 seconds [27227.612163] i915 0000:00:02.0: [drm] GT0: HuC: authenticated for all workloads [27227.612546] i915 0000:00:02.0: [drm] GT0: GUC: submission enabled [27227.612552] i915 0000:00:02.0: [drm] GT0: GUC: SLPC enabled [27227.613029] i915 0000:00:02.0: [drm] GT0: GUC: RC enabled [27227.641874] nvme nvme0: 16/0/0 default/read/poll queues [27227.998487] mei_hdcp 0000:00:16.0-HASH_6A4-F9B6-59CA-B5B6-70CADF8C6425: bound 0000:00:02.0 (ops i915_hdcp_ops [i915]) [27228.000157] mei_pxp 0000:00:16.0-HASH_CB2-4920-52D1-D0DC-7EB0C5A0EBDF: bound 0000:00:02.0 (ops i915_pxp_tee_component_ops [i915]) [27228.001762] OOM killer enabled. [27228.001774] Restarting tasks ... done. [27228.009070] random: crng reseeded on system resumption [27228.137773] PM: suspend exit [27229.218867] Generic FE-GE Realtek PHY r8169-0-300:00: attached PHY driver (mii_bus:phy_addr=r8169-0-300:00, irq=MAC) [27229.395574] r8169 0000:03:00.0 enp3s0: Link is Down [27233.564585] wlo1: authenticate with XXX (local address=XXX) [27233.565516] wlo1: send auth to XXX (try 1/3) [27233.608178] wlo1: authenticated [27233.612197] wlo1: associate with XXX (try 1/3) [27233.613795] wlo1: RX AssocResp from XXX (capab=0x1831 status=0 aid=2) [27233.621548] wlo1: associated [27233.660146] wlo1: Limiting TX power to 27 (27 - 0) dBm as advertised by XXX [27236.296605] usb 1-5: USB disconnect, device number 28 [27251.022471] input: ... (AVRCP) as /devices/virtual/input/input45 [29340.861595] wlo1: deauthenticating from XXX by local choice (Reason: 3=DEAUTH_LEAVING) [29341.252614] iwlwifi 0000:00:14.3: WFPM_UMAC_PD_NOTIFICATION: 0x20 [29341.252625] iwlwifi 0000:00:14.3: WFPM_LMAC2_PD_NOTIFICATION: 0x1f [29341.252634] iwlwifi 0000:00:14.3: WFPM_AUTH_KEY_0: 0x90 [29341.252641] iwlwifi 0000:00:14.3: CNVI_SCU_SEQ_DATA_DW9: 0x0 [29341.253905] iwlwifi 0000:00:14.3: RFIm is deactivated, reason = 4 [29341.695236] iwlwifi 0000:00:14.3: WFPM_UMAC_PD_NOTIFICATION: 0x20 [29341.695283] iwlwifi 0000:00:14.3: WFPM_LMAC2_PD_NOTIFICATION: 0x1f [29341.695291] iwlwifi 0000:00:14.3: WFPM_AUTH_KEY_0: 0x90 [29341.695299] iwlwifi 0000:00:14.3: CNVI_SCU_SEQ_DATA_DW9: 0x0 [29341.697526] iwlwifi 0000:00:14.3: RFIm is deactivated, reason = 4 [29342.603608] PM: suspend entry (s2idle) [29342.800209] Filesystems sync: 0.196 seconds [29342.800378] Loading firmware: iwlwifi-so-a0-gf-a0-89.ucode [29342.800383] Loading firmware: iwlwifi-so-a0-gf-a0.pnvm [29342.800386] Loading firmware: nvidia/570.169/gsp_ga10x.bin [29342.800423] Loading firmware: rtl_nic/rtl8168h-2.fw [29342.800424] Loading firmware: regulatory.db [29342.800446] Loading firmware: regulatory.db.p7s [29342.800446] Loading firmware: intel/ibt-0040-0041.sfi [29342.800466] Loading firmware: i915/adlp_dmc.bin [29342.800474] Loading firmware: i915/adlp_guc_70.bin [29342.800474] Loading firmware: i915/tgl_huc.bin [29342.800478] Loading firmware: intel/sof/sof-rpl.ri [29342.800480] Loading firmware: intel/sof-tplg/sof-hda-generic-2ch.tplg [29342.850460] Freezing user space processes [29342.852192] Freezing user space processes completed (elapsed 0.001 seconds) [29342.852194] OOM killer disabled. [29342.852195] Freezing remaining freezable tasks [29342.853390] Freezing remaining freezable tasks completed (elapsed 0.001 seconds) [29342.853392] printk: Suspending console(s) (use no_console_suspend to debug) [29343.388751] ACPI: EC: interrupt blocked [31077.879761] ACPI: EC: interrupt unblocked [31078.239406] pcieport 10000:e0:06.0: can't derive routing for PCI INT A [31078.239424] nvme 10000:e1:00.0: PCI INT A: no GSI [31078.239990] spd5118 1-0052: PM: dpm_run_callback(): spd5118_resume [spd5118] returns -6 [31078.240025] spd5118 1-0052: PM: failed to resume async: error -6 [31078.240189] spd5118 1-0050: PM: dpm_run_callback(): spd5118_resume [spd5118] returns -6 [31078.240254] spd5118 1-0050: PM: failed to resume async: error -6 [31078.250661] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/adlp_guc_70.bin version 70.44.1 [31078.250666] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/tgl_huc.bin version 7.9.3 [31078.253167] nvme nvme0: D3 entry latency set to 10 seconds [31078.264403] i915 0000:00:02.0: [drm] GT0: HuC: authenticated for all workloads [31078.264808] i915 0000:00:02.0: [drm] GT0: GUC: submission enabled [31078.264811] i915 0000:00:02.0: [drm] GT0: GUC: SLPC enabled [31078.265309] i915 0000:00:02.0: [drm] GT0: GUC: RC enabled [31078.291600] nvme nvme0: 16/0/0 default/read/poll queues [31078.644637] mei_hdcp 0000:00:16.0-HASH_6A4-F9B6-59CA-B5B6-70CADF8C6425: bound 0000:00:02.0 (ops i915_hdcp_ops [i915]) [31078.645835] mei_pxp 0000:00:16.0-HASH_CB2-4920-52D1-D0DC-7EB0C5A0EBDF: bound 0000:00:02.0 (ops i915_pxp_tee_component_ops [i915]) [31078.646911] OOM killer enabled. [31078.646917] Restarting tasks ... done. [31078.653810] random: crng reseeded on system resumption [31078.782809] PM: suspend exit [31079.834479] Generic FE-GE Realtek PHY r8169-0-300:00: attached PHY driver (mii_bus:phy_addr=r8169-0-300:00, irq=MAC) [31080.017949] r8169 0000:03:00.0 enp3s0: Link is Down [31080.233067] iwlwifi 0000:00:14.3: WFPM_UMAC_PD_NOTIFICATION: 0x20 [31080.233118] iwlwifi 0000:00:14.3: WFPM_LMAC2_PD_NOTIFICATION: 0x1f [31080.233168] iwlwifi 0000:00:14.3: WFPM_AUTH_KEY_0: 0x90 [31080.233182] iwlwifi 0000:00:14.3: CNVI_SCU_SEQ_DATA_DW9: 0x0 [31080.234522] iwlwifi 0000:00:14.3: RFIm is deactivated, reason = 4 [31084.706685] iwlwifi 0000:00:14.3: WFPM_UMAC_PD_NOTIFICATION: 0x20 [31084.706734] iwlwifi 0000:00:14.3: WFPM_LMAC2_PD_NOTIFICATION: 0x1f [31084.706784] iwlwifi 0000:00:14.3: WFPM_AUTH_KEY_0: 0x90 [31084.706836] iwlwifi 0000:00:14.3: CNVI_SCU_SEQ_DATA_DW9: 0x0 [31084.708012] iwlwifi 0000:00:14.3: RFIm is deactivated, reason = 4 [31084.861862] wlo1: authenticate with XXX (local address=XXX) [31084.862690] wlo1: send auth to XXX (try 1/3) [31084.905535] wlo1: authenticated [31084.911227] wlo1: associate with XXX (try 1/3) [31084.912950] wlo1: RX AssocResp from XXX (capab=0x1831 status=0 aid=2) [31084.922250] wlo1: associated [31084.989346] wlo1: Limiting TX power to 27 (27 - 0) dBm as advertised by XXX [31092.712071] input: ... (AVRCP) as /devices/virtual/input/input48 [33277.547687] SUPR0GipMap: fGetGipCpu=0x1b [33278.398183] vboxdrv: 00000000f9397f47 VMMR0.r0 [33278.499496] vboxdrv: 00000000f0dea804 VBoxDDR0.r0 [33845.446790] wlo1: Connection to AP XXX lost [33845.661618] wlo1: Connection to AP XXX lost [33859.336014] iwlwifi 0000:00:14.3: Unhandled alg: 0x703 [33860.665113] iwlwifi 0000:00:14.3: WFPM_UMAC_PD_NOTIFICATION: 0x20 [33860.665124] iwlwifi 0000:00:14.3: WFPM_LMAC2_PD_NOTIFICATION: 0x1f [33860.665132] iwlwifi 0000:00:14.3: WFPM_AUTH_KEY_0: 0x90 [33860.665140] iwlwifi 0000:00:14.3: CNVI_SCU_SEQ_DATA_DW9: 0x0 [33860.666323] iwlwifi 0000:00:14.3: RFIm is deactivated, reason = 4 [33870.641773] iwlwifi 0000:00:14.3: WFPM_UMAC_PD_NOTIFICATION: 0x20 [33870.641784] iwlwifi 0000:00:14.3: WFPM_LMAC2_PD_NOTIFICATION: 0x1f [33870.641792] iwlwifi 0000:00:14.3: WFPM_AUTH_KEY_0: 0x90 [33870.641800] iwlwifi 0000:00:14.3: CNVI_SCU_SEQ_DATA_DW9: 0x0 [33870.643125] iwlwifi 0000:00:14.3: RFIm is deactivated, reason = 4 [33870.742391] wlo1: authenticate with XXX (local address=XXX) [33870.743293] wlo1: send auth to XXX (try 1/3) [33870.792958] iwlwifi 0000:00:14.3: Unhandled alg: 0x707 [33870.793005] wlo1: authenticated [33870.794324] wlo1: associate with XXX (try 1/3) [33870.801025] wlo1: RX AssocResp from XXX (capab=0x1831 status=0 aid=2) [33870.811157] wlo1: associated [33870.811183] wlo1: Limiting TX power to 27 (27 - 0) dBm as advertised by XXX [33871.050279] iwlwifi 0000:00:14.3: Unhandled alg: 0x707 [33871.050371] iwlwifi 0000:00:14.3: Unhandled alg: 0x707 [33871.050469] iwlwifi 0000:00:14.3: Unhandled alg: 0x707 [35683.738786] wlo1: deauthenticating from XXX by local choice (Reason: 3=DEAUTH_LEAVING) [35684.160508] iwlwifi 0000:00:14.3: WFPM_UMAC_PD_NOTIFICATION: 0x20 [35684.160519] iwlwifi 0000:00:14.3: WFPM_LMAC2_PD_NOTIFICATION: 0x1f [35684.160528] iwlwifi 0000:00:14.3: WFPM_AUTH_KEY_0: 0x90 [35684.160536] iwlwifi 0000:00:14.3: CNVI_SCU_SEQ_DATA_DW9: 0x0 [35684.161762] iwlwifi 0000:00:14.3: RFIm is deactivated, reason = 4 [35684.602570] iwlwifi 0000:00:14.3: WFPM_UMAC_PD_NOTIFICATION: 0x20 [35684.602582] iwlwifi 0000:00:14.3: WFPM_LMAC2_PD_NOTIFICATION: 0x1f [35684.602590] iwlwifi 0000:00:14.3: WFPM_AUTH_KEY_0: 0x90 [35684.602598] iwlwifi 0000:00:14.3: CNVI_SCU_SEQ_DATA_DW9: 0x0 [35684.603930] iwlwifi 0000:00:14.3: RFIm is deactivated, reason = 4 [35685.501124] PM: suspend entry (s2idle) [35685.553776] Filesystems sync: 0.052 seconds [35685.553840] Loading firmware: iwlwifi-so-a0-gf-a0-89.ucode [35685.553954] Loading firmware: iwlwifi-so-a0-gf-a0.pnvm [35685.554031] Loading firmware: nvidia/570.169/gsp_ga10x.bin [35685.554052] Loading firmware: rtl_nic/rtl8168h-2.fw [35685.554064] Loading firmware: regulatory.db [35685.554090] Loading firmware: regulatory.db.p7s [35685.554100] Loading firmware: i915/adlp_dmc.bin [35685.554100] Loading firmware: intel/ibt-0040-0041.sfi [35685.554129] Loading firmware: i915/tgl_huc.bin [35685.554126] Loading firmware: i915/adlp_guc_70.bin [35685.554138] Loading firmware: intel/sof/sof-rpl.ri [35685.554174] Loading firmware: intel/sof-tplg/sof-hda-generic-2ch.tplg [35685.604542] Freezing user space processes [35685.606363] Freezing user space processes completed (elapsed 0.001 seconds) [35685.606365] OOM killer disabled. [35685.606366] Freezing remaining freezable tasks [35685.607231] Freezing remaining freezable tasks completed (elapsed 0.000 seconds) [35685.607233] printk: Suspending console(s) (use no_console_suspend to debug) [35686.178739] ACPI: EC: interrupt blocked [37683.482002] ACPI: EC: interrupt unblocked [37683.837114] pcieport 10000:e0:06.0: can't derive routing for PCI INT A [37683.837118] nvme 10000:e1:00.0: PCI INT A: no GSI [37683.838380] spd5118 1-0050: PM: dpm_run_callback(): spd5118_resume [spd5118] returns -6 [37683.838414] spd5118 1-0050: PM: failed to resume async: error -6 [37683.838654] spd5118 1-0052: PM: dpm_run_callback(): spd5118_resume [spd5118] returns -6 [37683.838686] spd5118 1-0052: PM: failed to resume async: error -6 [37683.846510] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/adlp_guc_70.bin version 70.44.1 [37683.846515] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/tgl_huc.bin version 7.9.3 [37683.849438] nvme nvme0: D3 entry latency set to 10 seconds [37683.859836] i915 0000:00:02.0: [drm] GT0: HuC: authenticated for all workloads [37683.860228] i915 0000:00:02.0: [drm] GT0: GUC: submission enabled [37683.860229] i915 0000:00:02.0: [drm] GT0: GUC: SLPC enabled [37683.860615] i915 0000:00:02.0: [drm] GT0: GUC: RC enabled [37683.886077] nvme nvme0: 16/0/0 default/read/poll queues [37684.208580] mei_hdcp 0000:00:16.0-HASH_6A4-F9B6-59CA-B5B6-70CADF8C6425: bound 0000:00:02.0 (ops i915_hdcp_ops [i915]) [37684.210633] mei_pxp 0000:00:16.0-HASH_CB2-4920-52D1-D0DC-7EB0C5A0EBDF: bound 0000:00:02.0 (ops i915_pxp_tee_component_ops [i915]) [37684.211978] OOM killer enabled. [37684.211989] Restarting tasks ... done. [37684.216646] random: crng reseeded on system resumption [37684.351337] PM: suspend exit [37685.455762] Generic FE-GE Realtek PHY r8169-0-300:00: attached PHY driver (mii_bus:phy_addr=r8169-0-300:00, irq=MAC) [37685.629180] r8169 0000:03:00.0 enp3s0: Link is Down [37685.847903] iwlwifi 0000:00:14.3: WFPM_UMAC_PD_NOTIFICATION: 0x20 [37685.847951] iwlwifi 0000:00:14.3: WFPM_LMAC2_PD_NOTIFICATION: 0x1f [37685.847960] iwlwifi 0000:00:14.3: WFPM_AUTH_KEY_0: 0x90 [37685.847970] iwlwifi 0000:00:14.3: CNVI_SCU_SEQ_DATA_DW9: 0x0 [37685.849223] iwlwifi 0000:00:14.3: RFIm is deactivated, reason = 4 [37690.297989] iwlwifi 0000:00:14.3: WFPM_UMAC_PD_NOTIFICATION: 0x20 [37690.298035] iwlwifi 0000:00:14.3: WFPM_LMAC2_PD_NOTIFICATION: 0x1f [37690.298088] iwlwifi 0000:00:14.3: WFPM_AUTH_KEY_0: 0x90 [37690.298140] iwlwifi 0000:00:14.3: CNVI_SCU_SEQ_DATA_DW9: 0x0 [37690.299266] iwlwifi 0000:00:14.3: RFIm is deactivated, reason = 4 [37690.459377] wlo1: authenticate with XXX (local address=XXX) [37690.460207] wlo1: send auth to XXX (try 1/3) [37690.502854] wlo1: authenticated [37690.505896] wlo1: associate with XXX (try 1/3) [37690.507705] wlo1: RX AssocResp from XXX (capab=0x1831 status=0 aid=2) [37690.520678] wlo1: associated [37690.595968] wlo1: Limiting TX power to 27 (27 - 0) dBm as advertised by XXX [37706.010914] input: ... (AVRCP) as /devices/virtual/input/input51 [39476.987055] st: Version 20160209, fixed bufsize 32768, s/g segs 256