[29146.110738] sdi: detected capacity change from 61117440 to 0 [29146.166149] EXT4-fs (sdi2): unmounting filesystem. [30607.296830] sd 10:0:0:1: [sdi] 61117440 512-byte logical blocks: (31.3 GB/29.1 GiB) [30607.297560] sdi: detected capacity change from 0 to 61117440 [30607.300008] sdi: sdi1 sdi2 [30611.623021] EXT4-fs (sdi2): recovery complete [30611.623642] EXT4-fs (sdi2): mounted filesystem with ordered data mode. Quota mode: none. [31388.450703] sdi: detected capacity change from 61117440 to 0 [40254.177898] EXT4-fs (sdi2): unmounting filesystem. [43060.140266] r8169 0000:07:00.0 enp7s0: Link is Down [43063.960518] r8169 0000:07:00.0 enp7s0: Link is Up - 1Gbps/Full - flow control off [43090.137824] PM: hibernation: hibernation entry [43091.286215] (NULL device *): firmware: direct-loading firmware regulatory.db [43091.286459] (NULL device *): firmware: direct-loading firmware regulatory.db.p7s [43091.287069] (NULL device *): firmware: direct-loading firmware iwlwifi-cc-a0-63.ucode [43091.542153] Filesystems sync: 0.255 seconds [43091.542157] Freezing user space processes ... (elapsed 0.012 seconds) done. [43091.554360] OOM killer disabled. [43091.555527] PM: hibernation: Preallocating image memory [43097.769274] PM: hibernation: Allocated 2972869 pages for snapshot [43097.769276] PM: hibernation: Allocated 11891476 kbytes in 6.21 seconds (1914.89 MB/s) [43097.769278] Freezing remaining freezable tasks ... [43117.773172] Showing busy workqueues and worker pools: [43117.773175] workqueue events_freezable: flags=0x4 [43117.773177] pwq 26: cpus=13 node=0 flags=0x0 nice=0 active=0/0 refcnt=2 [43117.773181] inactive: pci_pme_list_scan [43117.773187] workqueue events_freezable_power_: flags=0x84 [43117.773188] pwq 28: cpus=14 node=0 flags=0x0 nice=0 active=0/0 refcnt=2 [43117.773191] inactive: disk_events_workfn [43117.773193] pwq 24: cpus=12 node=0 flags=0x0 nice=0 active=0/0 refcnt=3 [43117.773195] inactive: disk_events_workfn, disk_events_workfn [43117.773198] pwq 20: cpus=10 node=0 flags=0x0 nice=0 active=0/0 refcnt=5 [43117.773199] inactive: disk_events_workfn, disk_events_workfn, disk_events_workfn, disk_events_workfn [43117.773204] pwq 12: cpus=6 node=0 flags=0x0 nice=0 active=0/0 refcnt=2 [43117.773206] inactive: disk_events_workfn [43117.773208] pwq 4: cpus=2 node=0 flags=0x0 nice=0 active=0/0 refcnt=3 [43117.773210] inactive: disk_events_workfn, disk_events_workfn [43117.773227] workqueue cifsiod: flags=0xc [43117.773228] pwq 12: cpus=6 node=0 flags=0x0 nice=0 active=1/0 refcnt=2 [43117.773230] in-flight: 120397:smb2_query_server_interfaces [cifs] [43117.773259] pwq 6: cpus=3 node=0 flags=0x0 nice=0 active=1/0 refcnt=2 [43117.773261] in-flight: 121291:smb2_query_server_interfaces [cifs] [43117.773285] pwq 2: cpus=1 node=0 flags=0x0 nice=0 active=1/0 refcnt=2 [43117.773286] in-flight: 117607:smb2_query_server_interfaces [cifs] [43117.773313] pool 2: cpus=1 node=0 flags=0x0 nice=0 hung=1s workers=3 idle: 121339 120197 [43117.773316] pool 6: cpus=3 node=0 flags=0x0 nice=0 hung=0s workers=3 idle: 120167 118294 [43117.773319] pool 12: cpus=6 node=0 flags=0x0 nice=0 hung=11s workers=4 idle: 121344 118351 121140 [43117.773364] [43117.773366] Restarting kernel threads ... done. [43117.938944] OOM killer enabled. [43117.938945] Restarting tasks ... done. [43117.941100] PM: hibernation: hibernation exit [43118.056223] r8169 0000:07:00.0 enp7s0: Link is Down [43118.120205] RTL8226 2.5Gbps PHY r8169-0-700:00: attached PHY driver (mii_bus:phy_addr=r8169-0-700:00, irq=MAC) [43118.328713] r8169 0000:07:00.0 enp7s0: Link is Down [43121.585727] r8169 0000:07:00.0 enp7s0: Link is Up - 1Gbps/Full - flow control off [43121.585737] IPv6: ADDRCONF(NETDEV_CHANGE): enp7s0: link becomes ready [43121.587835] r8169 0000:07:00.0 enp7s0: Link is Up - 1Gbps/Full - flow control off [43121.587914] r8169 0000:07:00.0 enp7s0: Link is Down [43125.186511] r8169 0000:07:00.0 enp7s0: Link is Up - 1Gbps/Full - flow control off [81574.604132] usb 8-1.3.2: USB disconnect, device number 7 [81574.896323] usb 8-1.3.3: USB disconnect, device number 8 [81575.147382] usb 7-1.3.4: new high-speed USB device number 15 using xhci_hcd [81575.263296] usb 7-1.3.4: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice= 6.63 [81575.263300] usb 7-1.3.4: New USB device strings: Mfr=1, Product=2, SerialNumber=... [81575.263301] usb 7-1.3.4: Product: USB2.1 Hub [81575.263302] usb 7-1.3.4: Manufacturer: GenesysLogic [81575.307926] hub 7-1.3.4:1.0: USB hub found [81575.308430] hub 7-1.3.4:1.0: 4 ports detected [81575.339447] usb 8-1.3.3: new SuperSpeed USB device number 15 using xhci_hcd [81575.360086] usb 8-1.3.3: New USB device found, idVendor=0781, idProduct=55a3, bcdDevice= 1.00 [81575.360092] usb 8-1.3.3: New USB device strings: Mfr=1, Product=2, SerialNumber=... [81575.360093] usb 8-1.3.3: Product: SanDisk 3.2Gen1 [81575.360094] usb 8-1.3.3: Manufacturer: USB [81575.360095] usb 8-1.3.3: SerialNumber: ... [81575.360495] usb-storage 8-1.3.3:1.0: USB Mass Storage device detected [81575.360620] scsi host8: usb-storage 8-1.3.3:1.0 [81576.380662] scsi 8:0:0:0: Direct-Access USB SanDisk 3.2Gen1 1.00 PQ: 0 ANSI: 6 [81576.380932] sd 8:0:0:0: Attached scsi generic sg5 type 0 [81576.381194] sd 8:0:0:0: [sdf] 240353280 512-byte logical blocks: (123 GB/115 GiB) [81576.381511] sd 8:0:0:0: [sdf] Write Protect is off [81576.381833] sd 8:0:0:0: [sdf] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [81576.389511] sdf: sdf1 [81576.389600] sd 8:0:0:0: [sdf] Attached SCSI removable disk [81576.555423] usb 8-1.3.2: new SuperSpeed USB device number 16 using xhci_hcd [81576.578644] usb 8-1.3.2: New USB device found, idVendor=13fe, idProduct=5500, bcdDevice= 1.10 [81576.578649] usb 8-1.3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [81576.578651] usb 8-1.3.2: Product: 2307 Boot ROM [81576.578652] usb 8-1.3.2: Manufacturer: Phison [81576.579011] usb-storage 8-1.3.2:1.0: USB Mass Storage device detected [81576.579124] scsi host9: usb-storage 8-1.3.2:1.0 [81577.595713] scsi 9:0:0:0: Direct-Access 2307 PRAM 1.00 PQ: 0 ANSI: 0 CCS [81577.595877] sd 9:0:0:0: Attached scsi generic sg6 type 0 [81577.596215] sd 9:0:0:0: [sdg] Media removed, stopped polling [81577.596430] sd 9:0:0:0: [sdg] Attached SCSI removable disk [84102.809297] usb 7-1.3.4: USB disconnect, device number 15 [84164.812365] sd 10:0:0:1: [sdi] 61117440 512-byte logical blocks: (31.3 GB/29.1 GiB) [84164.813105] sdi: detected capacity change from 0 to 61117440 [84164.815600] sdi: sdi1 sdi2 [90673.800737] usb 3-5.1: USB disconnect, device number 6 [90674.219950] usb 3-5.1: new full-speed USB device number 10 using xhci_hcd [90674.344003] usb 3-5.1: New USB device found, idVendor=046d, idProduct=0a4c, bcdDevice=20.40 [90674.344009] usb 3-5.1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [90674.344010] usb 3-5.1: Product: Logi Z407 [90674.344011] usb 3-5.1: Manufacturer: Logitech [90674.344012] usb 3-5.1: SerialNumber: ... [90674.415205] input: Logitech Logi Z407 Consumer Control as /devices/pci0000:00/0000:00:01.2/0000:02:00.0/0000:03:08.0/0000:09:00.1/usb3/3-5/3-5.1/3-5.1:1.0/0003:046D:0A4C.0018/input/input53 [90674.472069] input: Logitech Logi Z407 as /devices/pci0000:00/0000:00:01.2/0000:02:00.0/0000:03:08.0/0000:09:00.1/usb3/3-5/3-5.1/3-5.1:1.0/0003:046D:0A4C.0018/input/input54 [90674.474876] hid-generic 0003:046D:0A4C.0018: input,hiddev4,hidraw7: USB HID v1.10 Device [Logitech Logi Z407] on usb-0000:09:00.1-5.1/input0 [91648.770651] CIFS: Attempting to mount ... [91649.262525] CIFS: Status code returned 0xc000006d STATUS_LOGON_FAILURE [91650.563459] CIFS: Attempting to mount ... [91650.621110] CIFS: Status code returned 0xc000006d STATUS_LOGON_FAILURE [91662.240258] CIFS: Attempting to mount ... [91662.307462] CIFS: Status code returned 0xc000006d STATUS_LOGON_FAILURE [91667.905028] CIFS: Attempting to mount ... [91667.969431] CIFS: Status code returned 0xc000006d STATUS_LOGON_FAILURE [91668.811125] CIFS: Attempting to mount ... [91668.876083] CIFS: Status code returned 0xc000006d STATUS_LOGON_FAILURE [91682.326005] CIFS: Attempting to mount ... [91682.384822] CIFS: Status code returned 0xc000006d STATUS_LOGON_FAILURE [91683.374842] CIFS: Attempting to mount ... [91683.446035] CIFS: Status code returned 0xc000006d STATUS_LOGON_FAILURE [91723.002085] CIFS: Attempting to mount ... [91723.072120] CIFS: Status code returned 0xc000006d STATUS_LOGON_FAILURE [91856.866177] CIFS: Attempting to mount ... [91856.936251] CIFS: Status code returned 0xc000006d STATUS_LOGON_FAILURE [91970.591555] CIFS: Attempting to mount ... [91970.679305] CIFS: Status code returned 0xc000006d STATUS_LOGON_FAILURE [92016.845744] CIFS: Attempting to mount ... [92016.917004] CIFS: Status code returned 0xc000006d STATUS_LOGON_FAILURE [92317.265078] CIFS: Attempting to mount ... [92317.340413] CIFS: Status code returned 0xc000006d STATUS_LOGON_FAILURE [92327.150919] CIFS: Attempting to mount ... [92327.210654] CIFS: Status code returned 0xc000006d STATUS_LOGON_FAILURE [92476.736474] CIFS: Attempting to mount ... [92482.032967] CIFS: Attempting to mount ... [92573.314046] EXT4-fs (sdm1): error count since last fsck: 428 [92573.314054] EXT4-fs (sdm1): initial error at time 1663306868: ext4_validate_block_bitmap:390 [92573.314056] EXT4-fs (sdm1): last error at time 1667014248: ext4_validate_block_bitmap:390 [102657.660693] usb 3-5.1: USB disconnect, device number 10 [102658.081371] usb 3-5.1: new full-speed USB device number 11 using xhci_hcd [102658.200726] usb 3-5.1: New USB device found, idVendor=046d, idProduct=0a4c, bcdDevice=20.40 [102658.200730] usb 3-5.1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [102658.200731] usb 3-5.1: Product: Logi Z407 [102658.200732] usb 3-5.1: Manufacturer: Logitech [102658.200733] usb 3-5.1: SerialNumber: ... [102658.241888] input: Logitech Logi Z407 Consumer Control as /devices/pci0000:00/0000:00:01.2/0000:02:00.0/0000:03:08.0/0000:09:00.1/usb3/3-5/3-5.1/3-5.1:1.0/0003:046D:0A4C.0019/input/input55 [102658.305662] input: Logitech Logi Z407 as /devices/pci0000:00/0000:00:01.2/0000:02:00.0/0000:03:08.0/0000:09:00.1/usb3/3-5/3-5.1/3-5.1:1.0/0003:046D:0A4C.0019/input/input56 [102658.312060] hid-generic 0003:046D:0A4C.0019: input,hiddev4,hidraw7: USB HID v1.10 Device [Logitech Logi Z407] on usb-0000:09:00.1-5.1/input0 [102658.686836] usb 3-5.1: USB disconnect, device number 11 [102659.129328] usb 3-5.1: new full-speed USB device number 12 using xhci_hcd [102659.248721] usb 3-5.1: New USB device found, idVendor=046d, idProduct=0a4c, bcdDevice=20.40 [102659.248725] usb 3-5.1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [102659.248726] usb 3-5.1: Product: Logi Z407 [102659.248727] usb 3-5.1: Manufacturer: Logitech [102659.248728] usb 3-5.1: SerialNumber: ... [102659.298162] input: Logitech Logi Z407 Consumer Control as /devices/pci0000:00/0000:00:01.2/0000:02:00.0/0000:03:08.0/0000:09:00.1/usb3/3-5/3-5.1/3-5.1:1.0/0003:046D:0A4C.001A/input/input57 [102659.357446] input: Logitech Logi Z407 as /devices/pci0000:00/0000:00:01.2/0000:02:00.0/0000:03:08.0/0000:09:00.1/usb3/3-5/3-5.1/3-5.1:1.0/0003:046D:0A4C.001A/input/input58 [102659.362108] hid-generic 0003:046D:0A4C.001A: input,hiddev4,hidraw7: USB HID v1.10 Device [Logitech Logi Z407] on usb-0000:09:00.1-5.1/input0 [105416.312441] usb 3-5.1: USB disconnect, device number 12 [105416.765979] usb 3-5.1: new full-speed USB device number 13 using xhci_hcd [105416.887644] usb 3-5.1: New USB device found, idVendor=046d, idProduct=0a4c, bcdDevice=20.40 [105416.887651] usb 3-5.1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [105416.887652] usb 3-5.1: Product: Logi Z407 [105416.887653] usb 3-5.1: Manufacturer: Logitech [105416.887654] usb 3-5.1: SerialNumber: ... [105416.959118] input: Logitech Logi Z407 Consumer Control as /devices/pci0000:00/0000:00:01.2/0000:02:00.0/0000:03:08.0/0000:09:00.1/usb3/3-5/3-5.1/3-5.1:1.0/0003:046D:0A4C.001B/input/input59 [105417.018615] input: Logitech Logi Z407 as /devices/pci0000:00/0000:00:01.2/0000:02:00.0/0000:03:08.0/0000:09:00.1/usb3/3-5/3-5.1/3-5.1:1.0/0003:046D:0A4C.001B/input/input60 [105417.026185] hid-generic 0003:046D:0A4C.001B: input,hiddev4,hidraw7: USB HID v1.10 Device [Logitech Logi Z407] on usb-0000:09:00.1-5.1/input0 [106509.618101] perf: interrupt took too long (3982 > 3943), lowering kernel.perf_event_max_sample_rate to 50000 [112328.602814] usb 7-4: new full-speed USB device number 16 using xhci_hcd [112328.782573] usb 7-4: New USB device found, idVendor=2e8a, idProduct=0003, bcdDevice= 1.00 [112328.782579] usb 7-4: New USB device strings: Mfr=1, Product=2, SerialNumber=... [112328.782580] usb 7-4: Product: RP2 Boot [112328.782581] usb 7-4: Manufacturer: Raspberry Pi [112328.782582] usb 7-4: SerialNumber: ... [112328.784700] usb-storage 7-4:1.0: USB Mass Storage device detected [112328.784854] scsi host15: usb-storage 7-4:1.0 [112329.804866] scsi 15:0:0:0: Direct-Access RPI RP2 3 PQ: 0 ANSI: 2 [112329.805799] sd 15:0:0:0: Attached scsi generic sg13 type 0 [112329.806096] sd 15:0:0:0: [sdn] 262144 512-byte logical blocks: (134 MB/128 MiB) [112329.806619] sd 15:0:0:0: [sdn] Write Protect is off [112329.808614] sd 15:0:0:0: [sdn] No Caching mode page found [112329.808617] sd 15:0:0:0: [sdn] Assuming drive cache: write through [112329.816354] sdn: sdn1 [112329.816687] sd 15:0:0:0: [sdn] Attached SCSI removable disk [112334.232389] usb 7-4: USB disconnect, device number 16 [112739.429021] usb 7-4: new full-speed USB device number 17 using xhci_hcd [112739.597664] usb 7-4: New USB device found, idVendor=2e8a, idProduct=0003, bcdDevice= 1.00 [112739.597672] usb 7-4: New USB device strings: Mfr=1, Product=2, SerialNumber=... [112739.597675] usb 7-4: Product: RP2 Boot [112739.597676] usb 7-4: Manufacturer: Raspberry Pi [112739.597677] usb 7-4: SerialNumber: ... [112739.598637] usb-storage 7-4:1.0: USB Mass Storage device detected [112739.598849] scsi host15: usb-storage 7-4:1.0 [112740.614813] scsi 15:0:0:0: Direct-Access RPI RP2 3 PQ: 0 ANSI: 2 [112740.615074] sd 15:0:0:0: Attached scsi generic sg13 type 0 [112740.615316] sd 15:0:0:0: [sdn] 262144 512-byte logical blocks: (134 MB/128 MiB) [112740.616616] sd 15:0:0:0: [sdn] Write Protect is off [112740.618628] sd 15:0:0:0: [sdn] No Caching mode page found [112740.618632] sd 15:0:0:0: [sdn] Assuming drive cache: write through [112740.626387] sdn: sdn1 [112740.626599] sd 15:0:0:0: [sdn] Attached SCSI removable disk [112756.157815] usb 7-4: USB disconnect, device number 17 [113085.039338] usb 3-5.1: USB disconnect, device number 13 [113085.500122] usb 3-5.1: new full-speed USB device number 14 using xhci_hcd [113085.619610] usb 3-5.1: New USB device found, idVendor=046d, idProduct=0a4c, bcdDevice=20.40 [113085.619615] usb 3-5.1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [113085.619616] usb 3-5.1: Product: Logi Z407 [113085.619617] usb 3-5.1: Manufacturer: Logitech [113085.619618] usb 3-5.1: SerialNumber: ... [113085.685757] input: Logitech Logi Z407 Consumer Control as /devices/pci0000:00/0000:00:01.2/0000:02:00.0/0000:03:08.0/0000:09:00.1/usb3/3-5/3-5.1/3-5.1:1.0/0003:046D:0A4C.001C/input/input61 [113085.748242] input: Logitech Logi Z407 as /devices/pci0000:00/0000:00:01.2/0000:02:00.0/0000:03:08.0/0000:09:00.1/usb3/3-5/3-5.1/3-5.1:1.0/0003:046D:0A4C.001C/input/input62 [113085.756968] hid-generic 0003:046D:0A4C.001C: input,hiddev4,hidraw7: USB HID v1.10 Device [Logitech Logi Z407] on usb-0000:09:00.1-5.1/input0 [113476.718876] usb 3-5.1: USB disconnect, device number 14 [113477.166591] usb 3-5.1: new full-speed USB device number 15 using xhci_hcd [113477.286143] usb 3-5.1: New USB device found, idVendor=046d, idProduct=0a4c, bcdDevice=20.40 [113477.286148] usb 3-5.1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [113477.286149] usb 3-5.1: Product: Logi Z407 [113477.286150] usb 3-5.1: Manufacturer: Logitech [113477.286151] usb 3-5.1: SerialNumber: ... [113477.333388] input: Logitech Logi Z407 Consumer Control as /devices/pci0000:00/0000:00:01.2/0000:02:00.0/0000:03:08.0/0000:09:00.1/usb3/3-5/3-5.1/3-5.1:1.0/0003:046D:0A4C.001D/input/input63 [113477.390713] input: Logitech Logi Z407 as /devices/pci0000:00/0000:00:01.2/0000:02:00.0/0000:03:08.0/0000:09:00.1/usb3/3-5/3-5.1/3-5.1:1.0/0003:046D:0A4C.001D/input/input64 [113477.393419] hid-generic 0003:046D:0A4C.001D: input,hiddev4,hidraw7: USB HID v1.10 Device [Logitech Logi Z407] on usb-0000:09:00.1-5.1/input0 [113504.622842] usb 3-5.1: USB disconnect, device number 15 [113505.078215] usb 3-5.1: new full-speed USB device number 16 using xhci_hcd [113505.198109] usb 3-5.1: New USB device found, idVendor=046d, idProduct=0a4c, bcdDevice=20.40 [113505.198114] usb 3-5.1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [113505.198116] usb 3-5.1: Product: Logi Z407 [113505.198117] usb 3-5.1: Manufacturer: Logitech [113505.198118] usb 3-5.1: SerialNumber: ... [113505.269379] input: Logitech Logi Z407 Consumer Control as /devices/pci0000:00/0000:00:01.2/0000:02:00.0/0000:03:08.0/0000:09:00.1/usb3/3-5/3-5.1/3-5.1:1.0/0003:046D:0A4C.001E/input/input65 [113505.330324] input: Logitech Logi Z407 as /devices/pci0000:00/0000:00:01.2/0000:02:00.0/0000:03:08.0/0000:09:00.1/usb3/3-5/3-5.1/3-5.1:1.0/0003:046D:0A4C.001E/input/input66 [113505.344483] hid-generic 0003:046D:0A4C.001E: input,hiddev4,hidraw7: USB HID v1.10 Device [Logitech Logi Z407] on usb-0000:09:00.1-5.1/input0 [118117.608018] r8169 0000:07:00.0 enp7s0: Link is Down [118121.208942] r8169 0000:07:00.0 enp7s0: Link is Up - 1Gbps/Full - flow control off [118147.807286] PM: hibernation: hibernation entry [118148.802571] (NULL device *): firmware: direct-loading firmware regulatory.db [118148.802663] (NULL device *): firmware: direct-loading firmware regulatory.db.p7s [118148.803230] (NULL device *): firmware: direct-loading firmware iwlwifi-cc-a0-63.ucode [118149.124936] Filesystems sync: 0.321 seconds [118149.124941] Freezing user space processes ... (elapsed 0.007 seconds) done. [118149.132357] OOM killer disabled. [118149.133441] PM: hibernation: Preallocating image memory [118155.819066] PM: hibernation: Allocated 3223475 pages for snapshot [118155.819068] PM: hibernation: Allocated 12893900 kbytes in 6.68 seconds (1930.22 MB/s) [118155.819070] Freezing remaining freezable tasks ... (elapsed 5.716 seconds) done. [118161.535472] printk: Suspending console(s) (use no_console_suspend to debug) [118161.576669] r8169 0000:07:00.0 enp7s0: Link is Down [118162.546241] ACPI: EC: interrupt blocked [118162.548976] ACPI: PM: Preparing to enter system sleep state S4 [118163.080525] ACPI: EC: event blocked [118163.080527] ACPI: EC: EC stopped [118163.080528] ACPI: PM: Saving platform NVS memory [118163.083996] Disabling non-boot CPUs ... [118163.085788] smpboot: CPU 1 is now offline [118163.089528] smpboot: CPU 2 is now offline [118163.093187] smpboot: CPU 3 is now offline [118163.096805] smpboot: CPU 4 is now offline [118163.100255] smpboot: CPU 5 is now offline [118163.103708] smpboot: CPU 6 is now offline [118163.106676] smpboot: CPU 7 is now offline [118163.109514] smpboot: CPU 8 is now offline [118163.110867] Spectre V2 : Update user space SMT mitigation: STIBP off [118163.112226] smpboot: CPU 9 is now offline [118163.115019] smpboot: CPU 10 is now offline [118163.117978] smpboot: CPU 11 is now offline [118163.120930] smpboot: CPU 12 is now offline [118163.123815] smpboot: CPU 13 is now offline [118163.127314] smpboot: CPU 14 is now offline [118163.130233] smpboot: CPU 15 is now offline [118163.131569] PM: hibernation: Creating image: [118163.428332] PM: hibernation: Need to copy 3255760 pages [118163.132152] ACPI: PM: Restoring platform NVS memory [118163.132693] ACPI: EC: EC started [118163.132787] LVT offset 0 assigned for vector 0x400 [118163.133226] Enabling non-boot CPUs ... [118163.133262] x86: Booting SMP configuration: [118163.133263] smpboot: Booting Node 0 Processor 1 APIC 0x2 [118163.133611] microcode: CPU1: patch_level=0x0a201009 [118163.135795] ACPI: \_PR_.C002: Found 2 idle states [118163.137771] CPU1 is up [118163.137793] smpboot: Booting Node 0 Processor 2 APIC 0x4 [118163.137893] microcode: CPU2: patch_level=0x0a201009 [118163.140070] ACPI: \_PR_.C004: Found 2 idle states [118163.141774] CPU2 is up [118163.141789] smpboot: Booting Node 0 Processor 3 APIC 0x6 [118163.141885] microcode: CPU3: patch_level=0x0a201009 [118163.144071] ACPI: \_PR_.C006: Found 2 idle states [118163.145788] CPU3 is up [118163.145803] smpboot: Booting Node 0 Processor 4 APIC 0x8 [118163.145909] microcode: CPU4: patch_level=0x0a201009 [118163.148086] ACPI: \_PR_.C008: Found 2 idle states [118163.149810] CPU4 is up [118163.149824] smpboot: Booting Node 0 Processor 5 APIC 0xa [118163.149932] microcode: CPU5: patch_level=0x0a201009 [118163.152111] ACPI: \_PR_.C00A: Found 2 idle states [118163.153827] CPU5 is up [118163.153844] smpboot: Booting Node 0 Processor 6 APIC 0xc [118163.154013] microcode: CPU6: patch_level=0x0a201009 [118163.156193] ACPI: \_PR_.C00C: Found 2 idle states [118163.157874] CPU6 is up [118163.157888] smpboot: Booting Node 0 Processor 7 APIC 0xe [118163.158004] microcode: CPU7: patch_level=0x0a201009 [118163.160185] ACPI: \_PR_.C00E: Found 2 idle states [118163.161873] CPU7 is up [118163.161887] smpboot: Booting Node 0 Processor 8 APIC 0x1 [118163.162031] microcode: CPU8: patch_level=0x0a201009 [118163.164214] ACPI: \_PR_.C001: Found 2 idle states [118163.166145] Spectre V2 : Update user space SMT mitigation: STIBP always-on [118163.166162] CPU8 is up [118163.166183] smpboot: Booting Node 0 Processor 9 APIC 0x3 [118163.166289] microcode: CPU9: patch_level=0x0a201009 [118163.168464] ACPI: \_PR_.C003: Found 2 idle states [118163.169917] CPU9 is up [118163.169931] smpboot: Booting Node 0 Processor 10 APIC 0x5 [118163.170024] microcode: CPU10: patch_level=0x0a201009 [118163.172203] ACPI: \_PR_.C005: Found 2 idle states [118163.173931] CPU10 is up [118163.173942] smpboot: Booting Node 0 Processor 11 APIC 0x7 [118163.174040] microcode: CPU11: patch_level=0x0a201009 [118163.176228] ACPI: \_PR_.C007: Found 2 idle states [118163.177962] CPU11 is up [118163.177975] smpboot: Booting Node 0 Processor 12 APIC 0x9 [118163.178086] microcode: CPU12: patch_level=0x0a201009 [118163.180270] ACPI: \_PR_.C009: Found 2 idle states [118163.182010] CPU12 is up [118163.182024] smpboot: Booting Node 0 Processor 13 APIC 0xb [118163.182133] microcode: CPU13: patch_level=0x0a201009 [118163.184342] ACPI: \_PR_.C00B: Found 2 idle states [118163.186043] CPU13 is up [118163.186057] smpboot: Booting Node 0 Processor 14 APIC 0xd [118163.186168] microcode: CPU14: patch_level=0x0a201009 [118163.188355] ACPI: \_PR_.C00D: Found 2 idle states [118163.190088] CPU14 is up [118163.190103] smpboot: Booting Node 0 Processor 15 APIC 0xf [118163.190214] microcode: CPU15: patch_level=0x0a201009 [118163.192401] ACPI: \_PR_.C00F: Found 2 idle states [118163.194131] CPU15 is up [118163.196308] ACPI: PM: Waking up from system sleep state S4 [118163.196847] ACPI: EC: interrupt unblocked [118163.367090] usb usb1: root hub lost power or was reset [118163.367093] usb usb2: root hub lost power or was reset [118163.367106] ACPI: EC: event unblocked [118163.367373] usb usb3: root hub lost power or was reset [118163.367375] usb usb4: root hub lost power or was reset [118163.367383] usb usb5: root hub lost power or was reset [118163.367385] usb usb6: root hub lost power or was reset [118163.367392] usb usb7: root hub lost power or was reset [118163.367394] usb usb8: root hub lost power or was reset [118163.367767] sd 0:0:0:0: [sdb] Starting disk [118163.367770] sd 3:0:0:0: [sda] Starting disk [118163.427959] nvme nvme1: Shutdown timeout set to 8 seconds [118163.433264] nvme nvme0: Shutdown timeout set to 10 seconds [118163.437873] nvme nvme0: 32/0/0 default/read/poll queues [118163.455019] nvme nvme1: 32/0/0 default/read/poll queues [118163.565972] r8169 0000:07:00.0 enp7s0: Link is Down [118163.661720] usb 7-3: reset high-speed USB device number 12 using xhci_hcd [118163.661850] usb 5-6: reset full-speed USB device number 4 using xhci_hcd [118163.661873] usb 3-1: reset high-speed USB device number 2 using xhci_hcd [118163.679823] ata3: SATA link down (SStatus 0 SControl 300) [118163.680947] ata5: SATA link down (SStatus 0 SControl 300) [118163.841687] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [118163.841689] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [118163.841950] ata1.00: supports DRM functions and may not be fully accessible [118163.843091] ata4.00: configured for UDMA/133 [118163.845027] ata1.00: supports DRM functions and may not be fully accessible [118163.847919] ata1.00: configured for UDMA/133 [118163.858510] ata1.00: Enabling discard_zeroes_data [118163.937711] usb 7-1: reset high-speed USB device number 2 using xhci_hcd [118163.937717] usb 3-5: reset high-speed USB device number 3 using xhci_hcd [118163.937879] usb 5-4: reset full-speed USB device number 2 using xhci_hcd [118164.213712] usb 3-6: reset full-speed USB device number 5 using xhci_hcd [118164.213875] usb 5-5: reset high-speed USB device number 3 using xhci_hcd [118164.255071] usb 8-3: reset SuperSpeed USB device number 14 using xhci_hcd [118164.413875] usb 8-1: reset SuperSpeed USB device number 2 using xhci_hcd [118164.489845] usb 6-1: reset SuperSpeed USB device number 2 using xhci_hcd [118164.497742] usb 4-2: reset SuperSpeed Plus Gen 2x1 USB device number 2 using xhci_hcd [118164.561812] usb 8-2: reset SuperSpeed USB device number 3 using xhci_hcd [118164.654331] usb 4-3: Device not responding to setup address. [118164.661972] usb 7-1.4: reset high-speed USB device number 5 using xhci_hcd [118164.746005] usb 5-5.1: reset high-speed USB device number 5 using xhci_hcd [118164.870282] usb 4-3: Device not responding to setup address. [118164.881976] usb 7-1.3: reset high-speed USB device number 4 using xhci_hcd [118164.925946] usb 5-5.3: reset high-speed USB device number 7 using xhci_hcd [118165.062406] usb 8-1.4: reset SuperSpeed USB device number 6 using xhci_hcd [118165.105704] usb 5-5.2: reset high-speed USB device number 6 using xhci_hcd [118165.203453] usb 8-1.3: reset SuperSpeed USB device number 4 using xhci_hcd [118165.281988] usb 4-3: reset SuperSpeed USB device number 3 using xhci_hcd [118165.285996] usb 5-5.4: reset high-speed USB device number 8 using xhci_hcd [118165.433993] usb 7-3.1: reset full-speed USB device number 13 using xhci_hcd [118165.465960] usb 5-5.3.2: reset full-speed USB device number 9 using xhci_hcd [118165.645717] usb 5-5.3.4: reset high-speed USB device number 10 using xhci_hcd [118165.665727] usb 7-1.4.4: reset high-speed USB device number 9 using xhci_hcd [118165.849961] usb 7-1.4.2: reset full-speed USB device number 7 using xhci_hcd [118166.029992] usb 7-1.4.3: reset full-speed USB device number 8 using xhci_hcd [118166.378342] usb 8-1.4.1: reset SuperSpeed USB device number 9 using xhci_hcd [118166.482425] usb 8-1.4.4: reset SuperSpeed USB device number 10 using xhci_hcd [118166.483122] r8169 0000:07:00.0 enp7s0: Link is Up - 1Gbps/Full - flow control off [118166.586388] usb 8-1.3.3: reset SuperSpeed USB device number 15 using xhci_hcd [118166.686388] usb 8-1.3.2: reset SuperSpeed USB device number 16 using xhci_hcd [118166.706560] usb 8-1.3.2: device firmware changed [118166.838391] usb 8-XXX.XXX.XXX.XXX: reset SuperSpeed USB device number 11 using xhci_hcd [118166.938372] usb 8-XXX.XXX.XXX.XXX: reset SuperSpeed USB device number 12 using xhci_hcd [118170.501828] usb 4-3: reset SuperSpeed USB device number 3 using xhci_hcd [118171.593930] usb 3-1.2: reset full-speed USB device number 7 using xhci_hcd [118171.973930] usb 3-1.3: reset full-speed USB device number 9 using xhci_hcd [118172.541908] usb 3-1.1: reset low-speed USB device number 4 using xhci_hcd [118173.009911] usb 3-5.2: reset full-speed USB device number 8 using xhci_hcd [118173.189882] usb 3-5.1: reset full-speed USB device number 16 using xhci_hcd [118173.337662] OOM killer enabled. [118173.337663] Restarting tasks ... [118173.337757] usb 2-1: USB disconnect, device number 3 [118173.337757] usb 4-3: USB disconnect, device number 3 [118173.338011] usb 8-1.3.2: USB disconnect, device number 16 [118173.339688] done. [118173.340004] PM: hibernation: hibernation exit [118173.340986] Bluetooth: hci0: Bootloader revision 0.3 build 0 week 24 2017 [118173.343001] Bluetooth: hci0: Device revision is 1 [118173.343003] Bluetooth: hci0: Secure boot is enabled [118173.343004] Bluetooth: hci0: OTP lock is enabled [118173.343004] Bluetooth: hci0: API lock is enabled [118173.343005] Bluetooth: hci0: Debug lock is disabled [118173.343006] Bluetooth: hci0: Minimum firmware build 1 week 10 2014 [118173.359127] bluetooth hci0: firmware: direct-loading firmware intel/ibt-20-1-3.sfi [118173.359131] Bluetooth: hci0: Found device firmware: intel/ibt-20-1-3.sfi [118173.359142] Bluetooth: hci0: Boot Address: 0x24800 [118173.359143] Bluetooth: hci0: Firmware Version: 255-255.255 [118173.403960] EXT4-fs warning (device sdm1): htree_dirblock_to_tree:1072: inode #9836708: lblock 0: comm dolphin: error -5 reading directory block [118173.403976] EXT4-fs warning (device sdm1): htree_dirblock_to_tree:1072: inode #9836708: lblock 0: comm dolphin: error -5 reading directory block [118173.404371] EXT4-fs warning (device sdm1): htree_dirblock_to_tree:1072: inode #9830408: lblock 0: comm dolphin: error -5 reading directory block [118173.404391] EXT4-fs warning (device sdm1): htree_dirblock_to_tree:1072: inode #9830408: lblock 0: comm dolphin: error -5 reading directory block [118173.404581] EXT4-fs warning (device sdm1): htree_dirblock_to_tree:1072: inode #9830409: lblock 0: comm dolphin: error -5 reading directory block [118173.404605] EXT4-fs warning (device sdm1): htree_dirblock_to_tree:1072: inode #9830409: lblock 0: comm dolphin: error -5 reading directory block [118173.404774] EXT4-fs warning (device sdm1): htree_dirblock_to_tree:1072: inode #2: lblock 0: comm dolphin: error -5 reading directory block [118173.404796] EXT4-fs warning (device sdm1): htree_dirblock_to_tree:1072: inode #2: lblock 0: comm dolphin: error -5 reading directory block [118173.481533] sd 14:0:0:0: [sdm] Synchronizing SCSI cache [118173.529534] r8169 0000:07:00.0 enp7s0: Link is Down [118173.597532] RTL8226 2.5Gbps PHY r8169-0-700:00: attached PHY driver (mii_bus:phy_addr=r8169-0-700:00, irq=MAC) [118173.709646] usb 8-1.3.2: new SuperSpeed USB device number 17 using xhci_hcd [118173.730504] usb 8-1.3.2: New USB device found, idVendor=0951, idProduct=1666, bcdDevice= 1.10 [118173.730507] usb 8-1.3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [118173.730508] usb 8-1.3.2: Product: DataTraveler 3.0 [118173.730509] usb 8-1.3.2: Manufacturer: Kingston [118173.730510] usb 8-1.3.2: SerialNumber: ... [118173.730833] usb-storage 8-1.3.2:1.0: USB Mass Storage device detected [118173.730895] scsi host9: usb-storage 8-1.3.2:1.0 [118173.793531] sd 14:0:0:0: [sdm] Synchronize Cache(10) failed: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK [118173.802774] r8169 0000:07:00.0 enp7s0: Link is Down [118174.649642] Bluetooth: hci0: Waiting for firmware download to complete [118174.649975] Bluetooth: hci0: Firmware loaded in 1260607 usecs [118174.650008] Bluetooth: hci0: Waiting for device to boot [118174.664977] Bluetooth: hci0: Device booted in 14626 usecs [118174.665093] bluetooth hci0: firmware: direct-loading firmware intel/ibt-20-1-3.ddc [118174.665097] Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-20-1-3.ddc [118174.670982] Bluetooth: hci0: Applying Intel DDC parameters completed [118174.673984] Bluetooth: hci0: Firmware revision 0.0 build 191 week 21 2021 [118174.745907] scsi 9:0:0:0: Direct-Access Kingston DataTraveler 3.0 PMAP PQ: 0 ANSI: 6 [118174.746040] sd 9:0:0:0: Attached scsi generic sg6 type 0 [118174.746229] sd 9:0:0:0: [sdg] 121110528 512-byte logical blocks: (62.0 GB/57.8 GiB) [118174.746382] sd 9:0:0:0: [sdg] Write Protect is off [118174.746534] sd 9:0:0:0: [sdg] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [118174.821060] Bluetooth: MGMT ver 1.22 [118175.102626] sdg: sdg1 sdg2 sdg3 [118175.102855] sd 9:0:0:0: [sdg] Attached SCSI removable disk [118177.166574] r8169 0000:07:00.0 enp7s0: Link is Up - 1Gbps/Full - flow control off [118177.166586] IPv6: ADDRCONF(NETDEV_CHANGE): enp7s0: link becomes ready [118177.168710] r8169 0000:07:00.0 enp7s0: Link is Up - 1Gbps/Full - flow control off [118177.168778] r8169 0000:07:00.0 enp7s0: Link is Down [118180.870113] r8169 0000:07:00.0 enp7s0: Link is Up - 1Gbps/Full - flow control off [118182.032260] sdi: sdi1 sdi2 [118210.180148] usb 2-1: new SuperSpeed USB device number 4 using xhci_hcd [118210.199627] usb 2-1: New USB device found, idVendor=0bc2, idProduct=aa17, bcdDevice= 1.00 [118210.199632] usb 2-1: New USB device strings: Mfr=2, Product=3, SerialNumber=... [118210.199633] usb 2-1: Product: FireCuda Gaming SSD [118210.199634] usb 2-1: Manufacturer: Seagate [118210.199635] usb 2-1: SerialNumber: ... [118210.224373] scsi host15: uas [118212.134821] scsi 15:0:0:0: Direct-Access Seagate FireCuda SSD 2364 PQ: 0 ANSI: 6 [118212.246838] sd 15:0:0:0: Attached scsi generic sg12 type 0 [118212.246984] sd 15:0:0:0: [sdn] 976773168 512-byte logical blocks: (500 GB/466 GiB) [118212.247053] sd 15:0:0:0: [sdn] Write Protect is off [118212.247165] sd 15:0:0:0: [sdn] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [118212.247548] sd 15:0:0:0: [sdn] Preferred minimum I/O size 512 bytes [118212.247549] sd 15:0:0:0: [sdn] Optimal transfer size 2097152 bytes [118212.291049] sdn: sdn1 [118212.291155] sd 15:0:0:0: [sdn] Attached SCSI disk [118221.799223] EXT4-fs error: 2 callbacks suppressed [118221.916497] EXT4-fs warning (device sdm1): htree_dirblock_to_tree:1072: inode #9830408: lblock 0: comm code: error -5 reading directory block [118228.155395] EXT4-fs (sdn1): warning: mounting fs with errors, running e2fsck is recommended [118228.163984] EXT4-fs (sdn1): mounted filesystem with ordered data mode. Quota mode: none. [118541.588391] EXT4-fs (sdn1): error count since last fsck: 430 [118541.588400] EXT4-fs (sdn1): initial error at time 1663306868: ext4_validate_block_bitmap:390 [118541.588402] EXT4-fs (sdn1): last error at time 1667184224: ext4_validate_block_bitmap:390 [148592.022505] usb 7-4: new full-speed USB device number 18 using xhci_hcd [148592.202171] usb 7-4: New USB device found, idVendor=2e8a, idProduct=0003, bcdDevice= 1.00 [148592.202177] usb 7-4: New USB device strings: Mfr=1, Product=2, SerialNumber=... [148592.202179] usb 7-4: Product: RP2 Boot [148592.202180] usb 7-4: Manufacturer: Raspberry Pi [148592.202181] usb 7-4: SerialNumber: ... [148592.204206] usb-storage 7-4:1.0: USB Mass Storage device detected [148592.204306] scsi host16: usb-storage 7-4:1.0 [148593.059057] usb 7-4: USB disconnect, device number 18 [149192.471150] usb 8-XXX.XXX.XXX.XXX: USB disconnect, device number 12 [149192.854162] usb 8-XXX.XXX.XXX.XXX: new SuperSpeed USB device number 18 using xhci_hcd [149192.875169] usb 8-XXX.XXX.XXX.XXX: New USB device found, idVendor=0951, idProduct=1666, bcdDevice= 1.10 [149192.875176] usb 8-XXX.XXX.XXX.XXX: New USB device strings: Mfr=1, Product=2, SerialNumber=... [149192.875177] usb 8-XXX.XXX.XXX.XXX: Product: DataTraveler 3.0 [149192.875178] usb 8-XXX.XXX.XXX.XXX: Manufacturer: Kingston [149192.875179] usb 8-XXX.XXX.XXX.XXX: SerialNumber: ... [149192.875632] usb-storage 8-XXX.XXX.XXX.XXX:XXX.0: USB Mass Storage device detected [149192.875748] scsi host13: usb-storage 8-XXX.XXX.XXX.XXX:XXX.0 [149193.894492] scsi 13:0:0:0: Direct-Access Kingston DataTraveler 3.0 PMAP PQ: 0 ANSI: 6 [149193.894765] sd 13:0:0:0: Attached scsi generic sg11 type 0 [149193.894931] sd 13:0:0:0: [sdl] 60604416 512-byte logical blocks: (31.0 GB/28.9 GiB) [149193.895118] sd 13:0:0:0: [sdl] Write Protect is off [149193.895316] sd 13:0:0:0: [sdl] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [149194.305830] sdl: sdl1 [149194.306113] sd 13:0:0:0: [sdl] Attached SCSI removable disk [149206.554541] r8169 0000:07:00.0 enp7s0: Link is Down [149210.108314] r8169 0000:07:00.0 enp7s0: Link is Up - 1Gbps/Full - flow control off [149236.648806] PM: hibernation: hibernation entry [149237.683721] (NULL device *): firmware: direct-loading firmware intel/ibt-20-1-3.ddc [149237.684552] (NULL device *): firmware: direct-loading firmware intel/ibt-20-1-3.sfi [149237.684748] (NULL device *): firmware: direct-loading firmware regulatory.db [149237.684808] (NULL device *): firmware: direct-loading firmware regulatory.db.p7s [149237.685953] (NULL device *): firmware: direct-loading firmware iwlwifi-cc-a0-63.ucode [149237.708236] Filesystems sync: 0.022 seconds [149237.708240] Freezing user space processes ... (elapsed 0.001 seconds) done. [149237.710081] OOM killer disabled. [149237.711696] PM: hibernation: Preallocating image memory [149243.780698] PM: hibernation: Allocated 3246136 pages for snapshot [149243.780701] PM: hibernation: Allocated 12984544 kbytes in 6.06 seconds (2142.66 MB/s) [149243.780703] Freezing remaining freezable tasks ... (elapsed 6.986 seconds) done. [149250.767474] printk: Suspending console(s) (use no_console_suspend to debug) [149250.808468] r8169 0000:07:00.0 enp7s0: Link is Down [149251.547174] ACPI: EC: interrupt blocked [149251.549862] ACPI: PM: Preparing to enter system sleep state S4 [149252.085621] ACPI: EC: event blocked [149252.085623] ACPI: EC: EC stopped [149252.085624] ACPI: PM: Saving platform NVS memory [149252.088273] Disabling non-boot CPUs ... [149252.090060] smpboot: CPU 1 is now offline [149252.093164] smpboot: CPU 2 is now offline [149252.095864] smpboot: CPU 3 is now offline [149252.098634] smpboot: CPU 4 is now offline [149252.101240] smpboot: CPU 5 is now offline [149252.103968] smpboot: CPU 6 is now offline [149252.106637] smpboot: CPU 7 is now offline [149252.109279] smpboot: CPU 8 is now offline [149252.110346] Spectre V2 : Update user space SMT mitigation: STIBP off [149252.111765] smpboot: CPU 9 is now offline [149252.114079] smpboot: CPU 10 is now offline [149252.116385] smpboot: CPU 11 is now offline [149252.118604] smpboot: CPU 12 is now offline [149252.120849] smpboot: CPU 13 is now offline [149252.123859] smpboot: CPU 14 is now offline [149252.126354] smpboot: CPU 15 is now offline [149252.127506] PM: hibernation: Creating image: [149252.440611] PM: hibernation: Need to copy 3266476 pages [149252.128099] ACPI: PM: Restoring platform NVS memory [149252.128815] ACPI: EC: EC started [149252.128910] LVT offset 0 assigned for vector 0x400 [149252.129356] Enabling non-boot CPUs ... [149252.129394] x86: Booting SMP configuration: [149252.129394] smpboot: Booting Node 0 Processor 1 APIC 0x2 [149252.129745] microcode: CPU1: patch_level=0x0a201009 [149252.132131] ACPI: \_PR_.C002: Found 2 idle states [149252.135085] CPU1 is up [149252.135146] smpboot: Booting Node 0 Processor 2 APIC 0x4 [149252.135251] microcode: CPU2: patch_level=0x0a201009 [149252.137429] ACPI: \_PR_.C004: Found 2 idle states [149252.139081] CPU2 is up [149252.139096] smpboot: Booting Node 0 Processor 3 APIC 0x6 [149252.139184] microcode: CPU3: patch_level=0x0a201009 [149252.141374] ACPI: \_PR_.C006: Found 2 idle states [149252.143084] CPU3 is up [149252.143099] smpboot: Booting Node 0 Processor 4 APIC 0x8 [149252.143198] microcode: CPU4: patch_level=0x0a201009 [149252.145385] ACPI: \_PR_.C008: Found 2 idle states [149252.147104] CPU4 is up [149252.147121] smpboot: Booting Node 0 Processor 5 APIC 0xa [149252.147216] microcode: CPU5: patch_level=0x0a201009 [149252.149404] ACPI: \_PR_.C00A: Found 2 idle states [149252.151117] CPU5 is up [149252.151131] smpboot: Booting Node 0 Processor 6 APIC 0xc [149252.151226] microcode: CPU6: patch_level=0x0a201009 [149252.153409] ACPI: \_PR_.C00C: Found 2 idle states [149252.155136] CPU6 is up [149252.155149] smpboot: Booting Node 0 Processor 7 APIC 0xe [149252.155247] microcode: CPU7: patch_level=0x0a201009 [149252.157434] ACPI: \_PR_.C00E: Found 2 idle states [149252.159154] CPU7 is up [149252.159168] smpboot: Booting Node 0 Processor 8 APIC 0x1 [149252.159297] microcode: CPU8: patch_level=0x0a201009 [149252.161490] ACPI: \_PR_.C001: Found 2 idle states [149252.163218] Spectre V2 : Update user space SMT mitigation: STIBP always-on [149252.163235] CPU8 is up [149252.163256] smpboot: Booting Node 0 Processor 9 APIC 0x3 [149252.163356] microcode: CPU9: patch_level=0x0a201009 [149252.165551] ACPI: \_PR_.C003: Found 2 idle states [149252.167231] CPU9 is up [149252.167245] smpboot: Booting Node 0 Processor 10 APIC 0x5 [149252.167340] microcode: CPU10: patch_level=0x0a201009 [149252.169530] ACPI: \_PR_.C005: Found 2 idle states [149252.171253] CPU10 is up [149252.171267] smpboot: Booting Node 0 Processor 11 APIC 0x7 [149252.171370] microcode: CPU11: patch_level=0x0a201009 [149252.173561] ACPI: \_PR_.C007: Found 2 idle states [149252.175289] CPU11 is up [149252.175302] smpboot: Booting Node 0 Processor 12 APIC 0x9 [149252.175421] microcode: CPU12: patch_level=0x0a201009 [149252.177617] ACPI: \_PR_.C009: Found 2 idle states [149252.179328] CPU12 is up [149252.179342] smpboot: Booting Node 0 Processor 13 APIC 0xb [149252.179462] microcode: CPU13: patch_level=0x0a201009 [149252.181655] ACPI: \_PR_.C00B: Found 2 idle states [149252.183373] CPU13 is up [149252.183388] smpboot: Booting Node 0 Processor 14 APIC 0xd [149252.183512] microcode: CPU14: patch_level=0x0a201009 [149252.185704] ACPI: \_PR_.C00D: Found 2 idle states [149252.187411] CPU14 is up [149252.187426] smpboot: Booting Node 0 Processor 15 APIC 0xf [149252.187544] microcode: CPU15: patch_level=0x0a201009 [149252.189738] ACPI: \_PR_.C00F: Found 2 idle states [149252.191448] CPU15 is up [149252.193686] ACPI: PM: Waking up from system sleep state S4 [149252.194249] ACPI: EC: interrupt unblocked [149252.363728] usb usb1: root hub lost power or was reset [149252.363732] usb usb2: root hub lost power or was reset [149252.363749] ACPI: EC: event unblocked [149252.363955] usb usb3: root hub lost power or was reset [149252.363957] usb usb4: root hub lost power or was reset [149252.363960] usb usb5: root hub lost power or was reset [149252.363962] usb usb6: root hub lost power or was reset [149252.363975] usb usb7: root hub lost power or was reset [149252.363976] usb usb8: root hub lost power or was reset [149252.364310] sd 0:0:0:0: [sdb] Starting disk [149252.364314] sd 3:0:0:0: [sda] Starting disk [149252.423810] nvme nvme1: Shutdown timeout set to 8 seconds [149252.431148] nvme nvme0: Shutdown timeout set to 10 seconds [149252.435839] nvme nvme0: 32/0/0 default/read/poll queues [149252.450782] nvme nvme1: 32/0/0 default/read/poll queues [149252.563241] r8169 0000:07:00.0 enp7s0: Link is Down [149252.659101] usb 7-1: reset high-speed USB device number 2 using xhci_hcd [149252.659108] usb 3-1: reset high-speed USB device number 2 using xhci_hcd [149252.659112] usb 5-4: reset full-speed USB device number 2 using xhci_hcd [149252.677134] ata3: SATA link down (SStatus 0 SControl 300) [149252.678022] ata5: SATA link down (SStatus 0 SControl 300) [149252.838999] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [149252.839004] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [149252.840485] ata4.00: configured for UDMA/133 [149252.842138] ata1.00: supports DRM functions and may not be fully accessible [149252.845191] ata1.00: supports DRM functions and may not be fully accessible [149252.848090] ata1.00: configured for UDMA/133 [149252.858425] ata1.00: Enabling discard_zeroes_data [149252.935019] usb 5-6: reset full-speed USB device number 4 using xhci_hcd [149252.935030] usb 3-5: reset high-speed USB device number 3 using xhci_hcd [149252.971018] usb 7-3: reset high-speed USB device number 12 using xhci_hcd [149253.211036] usb 5-5: reset high-speed USB device number 3 using xhci_hcd [149253.211119] usb 3-6: reset full-speed USB device number 5 using xhci_hcd [149253.487117] usb 6-1: reset SuperSpeed USB device number 2 using xhci_hcd [149253.495060] usb 4-2: reset SuperSpeed Plus Gen 2x1 USB device number 2 using xhci_hcd [149253.510524] usb 8-3: reset SuperSpeed USB device number 14 using xhci_hcd [149253.727688] usb 8-2: reset SuperSpeed USB device number 3 using xhci_hcd [149253.743281] usb 5-5.4: reset high-speed USB device number 8 using xhci_hcd [149253.875156] usb 8-1: reset SuperSpeed USB device number 2 using xhci_hcd [149253.883321] usb 3-1.1: reset low-speed USB device number 4 using xhci_hcd [149253.923066] usb 5-5.1: reset high-speed USB device number 5 using xhci_hcd [149253.979277] usb 7-1.3: reset high-speed USB device number 4 using xhci_hcd [149254.103050] usb 5-5.3: reset high-speed USB device number 7 using xhci_hcd [149254.159307] usb 7-1.4: reset high-speed USB device number 5 using xhci_hcd [149254.283257] usb 5-5.2: reset high-speed USB device number 6 using xhci_hcd [149254.427297] usb 7-3.1: reset full-speed USB device number 13 using xhci_hcd [149254.451310] usb 3-1.2: reset full-speed USB device number 7 using xhci_hcd [149254.539250] usb 5-5.3.4: reset high-speed USB device number 10 using xhci_hcd [149254.659714] usb 8-1.4: reset SuperSpeed USB device number 6 using xhci_hcd [149254.719270] usb 5-5.3.2: reset full-speed USB device number 9 using xhci_hcd [149254.800618] usb 8-1.3: reset SuperSpeed USB device number 4 using xhci_hcd [149254.831074] usb 3-1.3: reset full-speed USB device number 9 using xhci_hcd [149254.983299] usb 7-1.4.4: reset high-speed USB device number 9 using xhci_hcd [149255.111275] usb 3-5.2: reset full-speed USB device number 8 using xhci_hcd [149255.167282] usb 7-1.4.2: reset full-speed USB device number 7 using xhci_hcd [149255.291048] usb 3-5.1: reset full-speed USB device number 16 using xhci_hcd [149255.347297] usb 7-1.4.3: reset full-speed USB device number 8 using xhci_hcd [149255.465283] r8169 0000:07:00.0 enp7s0: Link is Up - 1Gbps/Full - flow control off [149255.694268] usb 8-1.4.4: reset SuperSpeed USB device number 10 using xhci_hcd [149255.796179] usb 8-1.4.1: reset SuperSpeed USB device number 9 using xhci_hcd [149255.899711] usb 8-1.3.3: reset SuperSpeed USB device number 15 using xhci_hcd [149255.999728] usb 8-1.3.2: reset SuperSpeed USB device number 17 using xhci_hcd [149256.099724] usb 8-XXX.XXX.XXX.XXX: reset SuperSpeed USB device number 11 using xhci_hcd [149256.199712] usb 8-XXX.XXX.XXX.XXX: reset SuperSpeed USB device number 18 using xhci_hcd [149256.221144] OOM killer enabled. [149256.221145] Restarting tasks ... [149256.221266] usb 2-1: USB disconnect, device number 4 [149256.222479] done. [149256.222724] PM: hibernation: hibernation exit [149256.224540] Bluetooth: hci0: Bootloader revision 0.3 build 0 week 24 2017 [149256.226545] Bluetooth: hci0: Device revision is 1 [149256.226546] Bluetooth: hci0: Secure boot is enabled [149256.226547] Bluetooth: hci0: OTP lock is enabled [149256.226548] Bluetooth: hci0: API lock is enabled [149256.226548] Bluetooth: hci0: Debug lock is disabled [149256.226549] Bluetooth: hci0: Minimum firmware build 1 week 10 2014 [149256.226551] Bluetooth: hci0: Found device firmware: intel/ibt-20-1-3.sfi [149256.226591] Bluetooth: hci0: Boot Address: 0x24800 [149256.226591] Bluetooth: hci0: Firmware Version: 255-255.255 [149256.277435] EXT4-fs warning (device sdn1): htree_dirblock_to_tree:1072: inode #9836708: lblock 0: comm dolphin: error -5 reading directory block [149256.277655] EXT4-fs warning (device sdn1): htree_dirblock_to_tree:1072: inode #9836708: lblock 0: comm dolphin: error -5 reading directory block [149256.280006] EXT4-fs warning (device sdn1): htree_dirblock_to_tree:1072: inode #2: lblock 0: comm dolphin: error -5 reading directory block [149256.280345] EXT4-fs warning (device sdn1): htree_dirblock_to_tree:1072: inode #2: lblock 0: comm dolphin: error -5 reading directory block [149256.298955] sd 15:0:0:0: [sdn] Synchronizing SCSI cache [149256.378533] r8169 0000:07:00.0 enp7s0: Link is Down [149256.442943] RTL8226 2.5Gbps PHY r8169-0-700:00: attached PHY driver (mii_bus:phy_addr=r8169-0-700:00, irq=MAC) [149256.495009] usb 4-3: new SuperSpeed USB device number 4 using xhci_hcd [149256.522757] usb 4-3: New USB device found, idVendor=3842, idProduct=3103, bcdDevice= 1.00 [149256.522761] usb 4-3: New USB device strings: Mfr=6, Product=7, SerialNumber=... [149256.522763] usb 4-3: Product: EVGA XR1 Capture Box [149256.522763] usb 4-3: Manufacturer: EVGA Corporation [149256.522764] usb 4-3: SerialNumber: ... [149256.523471] usb 4-3: Found UVC 1.00 device EVGA XR1 Capture Box (3842:3103) [149256.538943] sd 15:0:0:0: [sdn] Synchronize Cache(10) failed: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK [149256.540484] usb 4-3: UVC non compliance - GET_DEF(PROBE) not supported. Enabling workaround. [149256.647633] r8169 0000:07:00.0 enp7s0: Link is Down [149257.523196] Bluetooth: hci0: Waiting for firmware download to complete [149257.523546] Bluetooth: hci0: Firmware loaded in 1266613 usecs [149257.523558] Bluetooth: hci0: Waiting for device to boot [149257.538552] Bluetooth: hci0: Device booted in 14652 usecs [149257.538560] Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-20-1-3.ddc [149257.544549] Bluetooth: hci0: Applying Intel DDC parameters completed [149257.547553] Bluetooth: hci0: Firmware revision 0.0 build 191 week 21 2021 [149257.694650] Bluetooth: MGMT ver 1.22 [149259.977533] r8169 0000:07:00.0 enp7s0: Link is Up - 1Gbps/Full - flow control off [149259.977546] IPv6: ADDRCONF(NETDEV_CHANGE): enp7s0: link becomes ready [149259.980211] r8169 0000:07:00.0 enp7s0: Link is Up - 1Gbps/Full - flow control off [149259.980297] r8169 0000:07:00.0 enp7s0: Link is Down [149263.580444] r8169 0000:07:00.0 enp7s0: Link is Up - 1Gbps/Full - flow control off [149264.916276] sdi: sdi1 sdi2 [149381.738366] usb 8-XXX.XXX.XXX.XXX: USB disconnect, device number 18 [149382.129606] usb 8-XXX.XXX.XXX.XXX: new SuperSpeed USB device number 19 using xhci_hcd [149382.150616] usb 8-XXX.XXX.XXX.XXX: New USB device found, idVendor=0951, idProduct=1666, bcdDevice= 1.10 [149382.150626] usb 8-XXX.XXX.XXX.XXX: New USB device strings: Mfr=1, Product=2, SerialNumber=... [149382.150627] usb 8-XXX.XXX.XXX.XXX: Product: DataTraveler 3.0 [149382.150628] usb 8-XXX.XXX.XXX.XXX: Manufacturer: Kingston [149382.150629] usb 8-XXX.XXX.XXX.XXX: SerialNumber: ... [149382.151165] usb-storage 8-XXX.XXX.XXX.XXX:XXX.0: USB Mass Storage device detected [149382.151363] scsi host13: usb-storage 8-XXX.XXX.XXX.XXX:XXX.0 [149383.173946] scsi 13:0:0:0: Direct-Access Kingston DataTraveler 3.0 PMAP PQ: 0 ANSI: 6 [149383.174173] sd 13:0:0:0: Attached scsi generic sg11 type 0 [149383.174397] sd 13:0:0:0: [sdl] 60604416 512-byte logical blocks: (31.0 GB/28.9 GiB) [149383.174591] sd 13:0:0:0: [sdl] Write Protect is off [149383.174812] sd 13:0:0:0: [sdl] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [149383.586452] sdl: sdl1 [149383.586644] sd 13:0:0:0: [sdl] Attached SCSI removable disk [149923.034602] usb 8-XXX.XXX.XXX.XXX: USB disconnect, device number 19 [149923.329789] usb 7-XXX.XXX.XXX.XXX: new full-speed USB device number 19 using xhci_hcd [149923.457498] usb 7-XXX.XXX.XXX.XXX: New USB device found, idVendor=2e8a, idProduct=0003, bcdDevice= 1.00 [149923.457503] usb 7-XXX.XXX.XXX.XXX: New USB device strings: Mfr=1, Product=2, SerialNumber=... [149923.457504] usb 7-XXX.XXX.XXX.XXX: Product: RP2 Boot [149923.457505] usb 7-XXX.XXX.XXX.XXX: Manufacturer: Raspberry Pi [149923.457506] usb 7-XXX.XXX.XXX.XXX: SerialNumber: ... [149923.459523] usb-storage 7-XXX.XXX.XXX.XXX:XXX.0: USB Mass Storage device detected [149923.459611] scsi host13: usb-storage 7-XXX.XXX.XXX.XXX:XXX.0 [149923.517852] usb 8-XXX.XXX.XXX.XXX: new SuperSpeed USB device number 20 using xhci_hcd [149923.542837] usb 8-XXX.XXX.XXX.XXX: New USB device found, idVendor=0951, idProduct=1666, bcdDevice= 1.10 [149923.542842] usb 8-XXX.XXX.XXX.XXX: New USB device strings: Mfr=1, Product=2, SerialNumber=... [149923.542843] usb 8-XXX.XXX.XXX.XXX: Product: DataTraveler 3.0 [149923.542844] usb 8-XXX.XXX.XXX.XXX: Manufacturer: Kingston [149923.542844] usb 8-XXX.XXX.XXX.XXX: SerialNumber: ... [149923.543212] usb-storage 8-XXX.XXX.XXX.XXX:XXX.0: USB Mass Storage device detected [149923.543305] scsi host16: usb-storage 8-XXX.XXX.XXX.XXX:XXX.0 [149924.483723] scsi 13:0:0:0: Direct-Access RPI RP2 3 PQ: 0 ANSI: 2 [149924.483908] sd 13:0:0:0: Attached scsi generic sg11 type 0 [149924.484153] sd 13:0:0:0: [sdl] 262144 512-byte logical blocks: (134 MB/128 MiB) [149924.485536] sd 13:0:0:0: [sdl] Write Protect is off [149924.487547] sd 13:0:0:0: [sdl] No Caching mode page found [149924.487551] sd 13:0:0:0: [sdl] Assuming drive cache: write through [149924.495638] sdl: sdl1 [149924.495835] sd 13:0:0:0: [sdl] Attached SCSI removable disk [149924.578145] scsi 16:0:0:0: Direct-Access Kingston DataTraveler 3.0 PMAP PQ: 0 ANSI: 6 [149924.578286] sd 16:0:0:0: Attached scsi generic sg12 type 0 [149924.578482] sd 16:0:0:0: [sdo] 60604416 512-byte logical blocks: (31.0 GB/28.9 GiB) [149924.578666] sd 16:0:0:0: [sdo] Write Protect is off [149924.578852] sd 16:0:0:0: [sdo] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [149924.989821] sdo: sdo1 [149924.989956] sd 16:0:0:0: [sdo] Attached SCSI removable disk [150036.494767] usb 7-XXX.XXX.XXX.XXX: USB disconnect, device number 19 [150903.295512] usb 7-3.1: USB disconnect, device number 13 [150906.756517] usb 7-3.1: new full-speed USB device number 20 using xhci_hcd [150906.928495] usb 7-3.1: New USB device found, idVendor=2e8a, idProduct=0003, bcdDevice= 1.00 [150906.928507] usb 7-3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [150906.928509] usb 7-3.1: Product: RP2 Boot [150906.928510] usb 7-3.1: Manufacturer: Raspberry Pi [150906.928512] usb 7-3.1: SerialNumber: ... [150906.930517] usb-storage 7-3.1:1.0: USB Mass Storage device detected [150906.931142] scsi host13: usb-storage 7-3.1:1.0 [150907.954718] scsi 13:0:0:0: Direct-Access RPI RP2 2 PQ: 0 ANSI: 2 [150907.954878] sd 13:0:0:0: Attached scsi generic sg11 type 0 [150907.955132] sd 13:0:0:0: [sdl] 262144 512-byte logical blocks: (134 MB/128 MiB) [150907.956541] sd 13:0:0:0: [sdl] Write Protect is off [150907.958532] sd 13:0:0:0: [sdl] No Caching mode page found [150907.958533] sd 13:0:0:0: [sdl] Assuming drive cache: write through [150907.966598] sdl: sdl1 [150907.966836] sd 13:0:0:0: [sdl] Attached SCSI removable disk [150909.424486] usb 7-XXX.XXX.XXX.XXX: new full-speed USB device number 21 using xhci_hcd [150909.544505] usb 7-XXX.XXX.XXX.XXX: New USB device found, idVendor=2e8a, idProduct=0003, bcdDevice= 1.00 [150909.544512] usb 7-XXX.XXX.XXX.XXX: New USB device strings: Mfr=1, Product=2, SerialNumber=... [150909.544514] usb 7-XXX.XXX.XXX.XXX: Product: RP2 Boot [150909.544515] usb 7-XXX.XXX.XXX.XXX: Manufacturer: Raspberry Pi [150909.544516] usb 7-XXX.XXX.XXX.XXX: SerialNumber: ... [150909.546524] usb-storage 7-XXX.XXX.XXX.XXX:XXX.0: USB Mass Storage device detected [150909.546638] scsi host17: usb-storage 7-XXX.XXX.XXX.XXX:XXX.0 [150910.578788] scsi 17:0:0:0: Direct-Access RPI RP2 3 PQ: 0 ANSI: 2 [150910.578976] sd 17:0:0:0: Attached scsi generic sg13 type 0 [150910.579249] sd 17:0:0:0: [sdp] 262144 512-byte logical blocks: (134 MB/128 MiB) [150910.580533] sd 17:0:0:0: [sdp] Write Protect is off [150910.582537] sd 17:0:0:0: [sdp] No Caching mode page found [150910.582539] sd 17:0:0:0: [sdp] Assuming drive cache: write through [150910.590639] sdp: sdp1 [150910.590823] sd 17:0:0:0: [sdp] Attached SCSI removable disk [150962.704108] usb 7-1.4.2: USB disconnect, device number 7 [150967.137605] usb 7-XXX.XXX.XXX.XXX: USB disconnect, device number 21 [150968.139668] usb 7-1.4.2: new full-speed USB device number 22 using xhci_hcd [150968.263493] usb 7-1.4.2: New USB device found, idVendor=2e8a, idProduct=0003, bcdDevice= 1.00 [150968.263497] usb 7-1.4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [150968.263498] usb 7-1.4.2: Product: RP2 Boot [150968.263499] usb 7-1.4.2: Manufacturer: Raspberry Pi [150968.263500] usb 7-1.4.2: SerialNumber: ... [150968.265713] usb-storage 7-1.4.2:1.0: USB Mass Storage device detected [150968.265873] scsi host17: usb-storage 7-1.4.2:1.0 [150969.297720] scsi 17:0:0:0: Direct-Access RPI RP2 3 PQ: 0 ANSI: 2 [150969.297875] sd 17:0:0:0: Attached scsi generic sg13 type 0 [150969.298123] sd 17:0:0:0: [sdp] 262144 512-byte logical blocks: (134 MB/128 MiB) [150969.299532] sd 17:0:0:0: [sdp] Write Protect is off [150969.301537] sd 17:0:0:0: [sdp] No Caching mode page found [150969.301539] sd 17:0:0:0: [sdp] Assuming drive cache: write through [150969.309579] sdp: sdp1 [150969.309772] sd 17:0:0:0: [sdp] Attached SCSI removable disk [150973.175585] usb 7-XXX.XXX.XXX.XXX: new full-speed USB device number 23 using xhci_hcd [150973.299498] usb 7-XXX.XXX.XXX.XXX: New USB device found, idVendor=2e8a, idProduct=0003, bcdDevice= 1.00 [150973.299504] usb 7-XXX.XXX.XXX.XXX: New USB device strings: Mfr=1, Product=2, SerialNumber=... [150973.299506] usb 7-XXX.XXX.XXX.XXX: Product: RP2 Boot [150973.299508] usb 7-XXX.XXX.XXX.XXX: Manufacturer: Raspberry Pi [150973.299509] usb 7-XXX.XXX.XXX.XXX: SerialNumber: ... [150973.301538] usb-storage 7-XXX.XXX.XXX.XXX:XXX.0: USB Mass Storage device detected [150973.301632] scsi host18: usb-storage 7-XXX.XXX.XXX.XXX:XXX.0 [150974.321752] scsi 18:0:0:0: Direct-Access RPI RP2 3 PQ: 0 ANSI: 2 [150974.321887] sd 18:0:0:0: Attached scsi generic sg14 type 0 [150974.322111] sd 18:0:0:0: [sdq] 262144 512-byte logical blocks: (134 MB/128 MiB) [150974.323528] sd 18:0:0:0: [sdq] Write Protect is off [150974.325533] sd 18:0:0:0: [sdq] No Caching mode page found [150974.325535] sd 18:0:0:0: [sdq] Assuming drive cache: write through [150974.333580] sdq: sdq1 [150974.333783] sd 18:0:0:0: [sdq] Attached SCSI removable disk [150992.545101] usb 7-XXX.XXX.XXX.XXX: USB disconnect, device number 23 [150995.187281] usb 7-XXX.XXX.XXX.XXX: new full-speed USB device number 24 using xhci_hcd [150995.310496] usb 7-XXX.XXX.XXX.XXX: New USB device found, idVendor=2e8a, idProduct=0003, bcdDevice= 1.00 [150995.310502] usb 7-XXX.XXX.XXX.XXX: New USB device strings: Mfr=1, Product=2, SerialNumber=... [150995.310504] usb 7-XXX.XXX.XXX.XXX: Product: RP2 Boot [150995.310505] usb 7-XXX.XXX.XXX.XXX: Manufacturer: Raspberry Pi [150995.310506] usb 7-XXX.XXX.XXX.XXX: SerialNumber: ... [150995.312536] usb-storage 7-XXX.XXX.XXX.XXX:XXX.0: USB Mass Storage device detected [150995.312647] scsi host18: usb-storage 7-XXX.XXX.XXX.XXX:XXX.0 [150996.336702] scsi 18:0:0:0: Direct-Access RPI RP2 3 PQ: 0 ANSI: 2 [150996.336860] sd 18:0:0:0: Attached scsi generic sg14 type 0 [150996.337094] sd 18:0:0:0: [sdq] 262144 512-byte logical blocks: (134 MB/128 MiB) [150996.338531] sd 18:0:0:0: [sdq] Write Protect is off [150996.340535] sd 18:0:0:0: [sdq] No Caching mode page found [150996.340537] sd 18:0:0:0: [sdq] Assuming drive cache: write through [150996.348637] sdq: sdq1 [150996.349106] sd 18:0:0:0: [sdq] Attached SCSI removable disk [151240.206732] usb 7-XXX.XXX.XXX.XXX: USB disconnect, device number 24 [151276.279335] usb 7-XXX.XXX.XXX.XXX: new full-speed USB device number 25 using xhci_hcd [151276.398497] usb 7-XXX.XXX.XXX.XXX: New USB device found, idVendor=2e8a, idProduct=0003, bcdDevice= 1.00 [151276.398502] usb 7-XXX.XXX.XXX.XXX: New USB device strings: Mfr=1, Product=2, SerialNumber=... [151276.398504] usb 7-XXX.XXX.XXX.XXX: Product: RP2 Boot [151276.398505] usb 7-XXX.XXX.XXX.XXX: Manufacturer: Raspberry Pi [151276.398506] usb 7-XXX.XXX.XXX.XXX: SerialNumber: ... [151276.400527] usb-storage 7-XXX.XXX.XXX.XXX:XXX.0: USB Mass Storage device detected [151276.400617] scsi host18: usb-storage 7-XXX.XXX.XXX.XXX:XXX.0 [151277.420729] scsi 18:0:0:0: Direct-Access RPI RP2 3 PQ: 0 ANSI: 2 [151277.420896] sd 18:0:0:0: Attached scsi generic sg14 type 0 [151277.421148] sd 18:0:0:0: [sdq] 262144 512-byte logical blocks: (134 MB/128 MiB) [151277.422533] sd 18:0:0:0: [sdq] Write Protect is off [151277.424536] sd 18:0:0:0: [sdq] No Caching mode page found [151277.424538] sd 18:0:0:0: [sdq] Assuming drive cache: write through [151277.432593] sdq: sdq1 [151277.432856] sd 18:0:0:0: [sdq] Attached SCSI removable disk [151323.936351] usb 7-XXX.XXX.XXX.XXX: USB disconnect, device number 25 [151344.933354] usb 2-1: new SuperSpeed USB device number 5 using xhci_hcd [151344.952939] usb 2-1: New USB device found, idVendor=0bc2, idProduct=aa17, bcdDevice= 1.00 [151344.952945] usb 2-1: New USB device strings: Mfr=2, Product=3, SerialNumber=... [151344.952947] usb 2-1: Product: FireCuda Gaming SSD [151344.952948] usb 2-1: Manufacturer: Seagate [151344.952949] usb 2-1: SerialNumber: ... [151344.977184] scsi host18: uas [151346.888047] scsi 18:0:0:0: Direct-Access Seagate FireCuda SSD 2364 PQ: 0 ANSI: 6 [151346.989427] sd 18:0:0:0: Attached scsi generic sg14 type 0 [151346.989463] sd 18:0:0:0: [sdq] 976773168 512-byte logical blocks: (500 GB/466 GiB) [151346.989533] sd 18:0:0:0: [sdq] Write Protect is off [151346.989649] sd 18:0:0:0: [sdq] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [151346.990040] sd 18:0:0:0: [sdq] Preferred minimum I/O size 512 bytes [151346.990042] sd 18:0:0:0: [sdq] Optimal transfer size 2097152 bytes [151347.028085] sdq: sdq1 [151347.028333] sd 18:0:0:0: [sdq] Attached SCSI disk [151349.512450] EXT4-fs (sdq1): warning: mounting fs with errors, running e2fsck is recommended [151349.516407] EXT4-fs (sdq1): recovery complete [151349.518739] EXT4-fs (sdq1): mounted filesystem with ordered data mode. Quota mode: none. [151361.551601] usb 7-1.4.2: USB disconnect, device number 22 [151361.913913] usb 7-1.4.2: new full-speed USB device number 26 using xhci_hcd [151362.040490] usb 7-1.4.2: New USB device found, idVendor=2e8a, idProduct=800a, bcdDevice= 1.00 [151362.040495] usb 7-1.4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [151362.040497] usb 7-1.4.2: Product: PicoArduino [151362.040498] usb 7-1.4.2: Manufacturer: Raspberry Pi [151362.040499] usb 7-1.4.2: SerialNumber: ... [151362.132529] cdc_acm 7-1.4.2:1.0: ttyACM0: USB ACM device [151362.141668] input: Raspberry Pi PicoArduino as /devices/pci0000:00/0000:00:08.1/0000:0e:00.3/usb7/7-1/7-1.4/7-1.4.2/7-1.4.2:1.2/0003:2E8A:800A.001F/input/input67 [151367.241986] hid-generic 0003:2E8A:800A.001F: input,hidraw8: USB HID v1.11 Keyboard [Raspberry Pi PicoArduino] on usb-0000:0e:00.3-1.4.2/input2 [151387.663229] usb 7-3.1: USB disconnect, device number 20 [151390.057437] usb 7-3.1: new full-speed USB device number 27 using xhci_hcd [151390.233617] usb 7-3.1: New USB device found, idVendor=1b1c, idProduct=0c0b, bcdDevice= 1.00 [151390.233622] usb 7-3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [151390.233624] usb 7-3.1: Product: Lighting Node PRO [151390.233625] usb 7-3.1: Manufacturer: Corsair [151390.233625] usb 7-3.1: SerialNumber: ... [151390.356577] cdc_acm 7-3.1:1.0: ttyACM2: USB ACM device [151392.841784] hid-generic 0003:1B1C:0C0B.0020: hiddev5,hidraw18: USB HID v1.11 Device [Corsair Lighting Node PRO] on usb-0000:0e:00.3-3.1/input2 [151392.842853] usb 7-3.1: USB disconnect, device number 27 [151393.541387] usb 7-3.1: new full-speed USB device number 28 using xhci_hcd [151393.717495] usb 7-3.1: New USB device found, idVendor=1b1c, idProduct=0c0b, bcdDevice= 1.00 [151393.717500] usb 7-3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [151393.717501] usb 7-3.1: Product: Lighting Node PRO [151393.717503] usb 7-3.1: Manufacturer: Corsair [151393.717503] usb 7-3.1: SerialNumber: ... [151393.844541] cdc_acm 7-3.1:1.0: ttyACM2: USB ACM device [151397.965805] hid-generic 0003:1B1C:0C0B.0021: hiddev5,hidraw18: USB HID v1.11 Device [Corsair Lighting Node PRO] on usb-0000:0e:00.3-3.1/input2 [151505.679101] usb 7-3.1: USB disconnect, device number 28 [151570.189365] usb 3-5.2: USB disconnect, device number 8 [151570.554459] usb 3-5.2: new full-speed USB device number 17 using xhci_hcd [151570.680631] usb 3-5.2: New USB device found, idVendor=1b1c, idProduct=0c0b, bcdDevice= 1.00 [151570.680635] usb 3-5.2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [151570.680637] usb 3-5.2: Product: Lighting Node PRO [151570.680638] usb 3-5.2: Manufacturer: Corsair [151570.680638] usb 3-5.2: SerialNumber: ... [151570.802688] cdc_acm 3-5.2:1.0: ttyACM1: USB ACM device [151570.810766] hid-generic 0003:1B1C:0C0B.0022: hiddev5,hidraw9: USB HID v1.11 Device [Corsair Lighting Node PRO] on usb-0000:09:00.1-5.2/input2 [151577.613355] usb 3-5.2: USB disconnect, device number 17 [151578.610327] usb 3-5.2: new full-speed USB device number 18 using xhci_hcd [151578.777635] usb 3-5.2: New USB device found, idVendor=1b1c, idProduct=0c0b, bcdDevice= 1.00 [151578.777640] usb 3-5.2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [151578.777641] usb 3-5.2: Product: Lighting Node PRO [151578.777642] usb 3-5.2: Manufacturer: Corsair [151578.777643] usb 3-5.2: SerialNumber: ... [151578.898695] cdc_acm 3-5.2:1.0: ttyACM1: USB ACM device [151578.906832] hid-generic 0003:1B1C:0C0B.0023: hiddev5,hidraw9: USB HID v1.11 Device [Corsair Lighting Node PRO] on usb-0000:09:00.1-5.2/input2 [151580.941352] usb 3-5.2: USB disconnect, device number 18 [151581.682481] usb 3-5.2: new full-speed USB device number 19 using xhci_hcd [151581.845620] usb 3-5.2: New USB device found, idVendor=1b1c, idProduct=0c0b, bcdDevice= 1.00 [151581.845625] usb 3-5.2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [151581.845627] usb 3-5.2: Product: Lighting Node PRO [151581.845628] usb 3-5.2: Manufacturer: Corsair [151581.845628] usb 3-5.2: SerialNumber: ... [151581.985703] cdc_acm 3-5.2:1.0: ttyACM1: USB ACM device [151581.993770] hid-generic 0003:1B1C:0C0B.0024: hiddev5,hidraw9: USB HID v1.11 Device [Corsair Lighting Node PRO] on usb-0000:09:00.1-5.2/input2 [151653.189124] EXT4-fs (sdq1): error count since last fsck: 432 [151653.189131] EXT4-fs (sdq1): initial error at time 1663306868: ext4_validate_block_bitmap:390 [151653.189133] EXT4-fs (sdq1): last error at time 1667281366: ext4_validate_block_bitmap:390 [151703.476328] usb 7-3.1: new full-speed USB device number 29 using xhci_hcd [151703.655494] usb 7-3.1: New USB device found, idVendor=1b1c, idProduct=0c0b, bcdDevice= 1.00 [151703.655498] usb 7-3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [151703.655500] usb 7-3.1: Product: Lighting Node PRO [151703.655500] usb 7-3.1: Manufacturer: Corsair [151703.655501] usb 7-3.1: SerialNumber: ... [151703.764681] cdc_acm 7-3.1:1.0: ttyACM2: USB ACM device [151703.772675] hid-generic 0003:1B1C:0C0B.0025: hiddev8,hidraw12: USB HID v1.11 Device [Corsair Lighting Node PRO] on usb-0000:0e:00.3-3.1/input2 [151734.290227] usb 7-3.1: USB disconnect, device number 29 [151735.043838] usb 7-3.1: new full-speed USB device number 30 using xhci_hcd [151735.215495] usb 7-3.1: New USB device found, idVendor=2e8a, idProduct=0003, bcdDevice= 1.00 [151735.215500] usb 7-3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [151735.215501] usb 7-3.1: Product: RP2 Boot [151735.215502] usb 7-3.1: Manufacturer: Raspberry Pi [151735.215503] usb 7-3.1: SerialNumber: ... [151735.217536] usb-storage 7-3.1:1.0: USB Mass Storage device detected [151735.217657] scsi host13: usb-storage 7-3.1:1.0 [151736.229719] scsi 13:0:0:0: Direct-Access RPI RP2 2 PQ: 0 ANSI: 2 [151736.229869] sd 13:0:0:0: Attached scsi generic sg11 type 0 [151736.230116] sd 13:0:0:0: [sdl] 262144 512-byte logical blocks: (134 MB/128 MiB) [151736.231533] sd 13:0:0:0: [sdl] Write Protect is off [151736.233539] sd 13:0:0:0: [sdl] No Caching mode page found [151736.233542] sd 13:0:0:0: [sdl] Assuming drive cache: write through [151736.241586] sdl: sdl1 [151736.241801] sd 13:0:0:0: [sdl] Attached SCSI removable disk [151745.659601] usb 7-3.1: USB disconnect, device number 30 [151746.083661] usb 7-3.1: new full-speed USB device number 31 using xhci_hcd [151746.258492] usb 7-3.1: New USB device found, idVendor=1b1c, idProduct=0c0b, bcdDevice= 1.00 [151746.258497] usb 7-3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [151746.258498] usb 7-3.1: Product: Lighting Node PRO [151746.258499] usb 7-3.1: Manufacturer: Corsair [151746.258500] usb 7-3.1: SerialNumber: ... [151746.388548] cdc_acm 7-3.1:1.0: ttyACM2: USB ACM device [151746.396657] hid-generic 0003:1B1C:0C0B.0026: hiddev8,hidraw12: USB HID v1.11 Device [Corsair Lighting Node PRO] on usb-0000:0e:00.3-3.1/input2 [151757.069164] usb 3-5.2: USB disconnect, device number 19 [151757.559482] usb 3-5.2: new full-speed USB device number 20 using xhci_hcd [151757.687432] usb 3-5.2: New USB device found, idVendor=2e8a, idProduct=0003, bcdDevice= 1.00 [151757.687437] usb 3-5.2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [151757.687439] usb 3-5.2: Product: RP2 Boot [151757.687440] usb 3-5.2: Manufacturer: Raspberry Pi [151757.687441] usb 3-5.2: SerialNumber: ... [151757.689507] usb-storage 3-5.2:1.0: USB Mass Storage device detected [151757.689607] scsi host13: usb-storage 3-5.2:1.0 [151758.693654] scsi 13:0:0:0: Direct-Access RPI RP2 3 PQ: 0 ANSI: 2 [151758.693806] sd 13:0:0:0: Attached scsi generic sg11 type 0 [151758.694034] sd 13:0:0:0: [sdl] 262144 512-byte logical blocks: (134 MB/128 MiB) [151758.695519] sd 13:0:0:0: [sdl] Write Protect is off [151758.697473] sd 13:0:0:0: [sdl] No Caching mode page found [151758.697475] sd 13:0:0:0: [sdl] Assuming drive cache: write through [151758.705520] sdl: sdl1 [151758.705743] sd 13:0:0:0: [sdl] Attached SCSI removable disk [151766.285158] usb 3-5.2: USB disconnect, device number 20 [151766.667339] usb 3-5.2: new full-speed USB device number 21 using xhci_hcd [151766.790423] usb 3-5.2: New USB device found, idVendor=1b1c, idProduct=0c0b, bcdDevice= 1.00 [151766.790427] usb 3-5.2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [151766.790429] usb 3-5.2: Product: Lighting Node PRO [151766.790429] usb 3-5.2: Manufacturer: Corsair [151766.790430] usb 3-5.2: SerialNumber: ... [151766.898659] cdc_acm 3-5.2:1.0: ttyACM1: USB ACM device [151766.906623] hid-generic 0003:1B1C:0C0B.0027: hiddev5,hidraw9: USB HID v1.11 Device [Corsair Lighting Node PRO] on usb-0000:09:00.1-5.2/input2 [151844.854122] usb 7-XXX.XXX.XXX.XXX: new full-speed USB device number 32 using xhci_hcd [151844.973494] usb 7-XXX.XXX.XXX.XXX: New USB device found, idVendor=2e8a, idProduct=0003, bcdDevice= 1.00 [151844.973499] usb 7-XXX.XXX.XXX.XXX: New USB device strings: Mfr=1, Product=2, SerialNumber=... [151844.973501] usb 7-XXX.XXX.XXX.XXX: Product: RP2 Boot [151844.973502] usb 7-XXX.XXX.XXX.XXX: Manufacturer: Raspberry Pi [151844.973502] usb 7-XXX.XXX.XXX.XXX: SerialNumber: ... [151844.975533] usb-storage 7-XXX.XXX.XXX.XXX:XXX.0: USB Mass Storage device detected [151844.975628] scsi host13: usb-storage 7-XXX.XXX.XXX.XXX:XXX.0 [151845.987727] scsi 13:0:0:0: Direct-Access RPI RP2 3 PQ: 0 ANSI: 2 [151845.987894] sd 13:0:0:0: Attached scsi generic sg11 type 0 [151845.988197] sd 13:0:0:0: [sdl] 262144 512-byte logical blocks: (134 MB/128 MiB) [151845.989541] sd 13:0:0:0: [sdl] Write Protect is off [151845.991540] sd 13:0:0:0: [sdl] No Caching mode page found [151845.991544] sd 13:0:0:0: [sdl] Assuming drive cache: write through [151845.999585] sdl: sdl1 [151845.999805] sd 13:0:0:0: [sdl] Attached SCSI removable disk [151853.838734] usb 7-XXX.XXX.XXX.XXX: USB disconnect, device number 32 [151901.177250] usb 7-XXX.XXX.XXX.XXX: new full-speed USB device number 33 using xhci_hcd [151901.300492] usb 7-XXX.XXX.XXX.XXX: New USB device found, idVendor=2e8a, idProduct=0003, bcdDevice= 1.00 [151901.300497] usb 7-XXX.XXX.XXX.XXX: New USB device strings: Mfr=1, Product=2, SerialNumber=... [151901.300498] usb 7-XXX.XXX.XXX.XXX: Product: RP2 Boot [151901.300500] usb 7-XXX.XXX.XXX.XXX: Manufacturer: Raspberry Pi [151901.300501] usb 7-XXX.XXX.XXX.XXX: SerialNumber: ... [151901.302529] usb-storage 7-XXX.XXX.XXX.XXX:XXX.0: USB Mass Storage device detected [151901.302601] scsi host13: usb-storage 7-XXX.XXX.XXX.XXX:XXX.0 [151901.710731] usb 7-XXX.XXX.XXX.XXX: USB disconnect, device number 33 [151902.197232] usb 7-XXX.XXX.XXX.XXX: new full-speed USB device number 34 using xhci_hcd [151902.316492] usb 7-XXX.XXX.XXX.XXX: New USB device found, idVendor=2e8a, idProduct=0003, bcdDevice= 1.00 [151902.316497] usb 7-XXX.XXX.XXX.XXX: New USB device strings: Mfr=1, Product=2, SerialNumber=... [151902.316498] usb 7-XXX.XXX.XXX.XXX: Product: RP2 Boot [151902.316499] usb 7-XXX.XXX.XXX.XXX: Manufacturer: Raspberry Pi [151902.316500] usb 7-XXX.XXX.XXX.XXX: SerialNumber: ... [151902.318511] usb-storage 7-XXX.XXX.XXX.XXX:XXX.0: USB Mass Storage device detected [151902.318593] scsi host13: usb-storage 7-XXX.XXX.XXX.XXX:XXX.0 [151903.334700] scsi 13:0:0:0: Direct-Access RPI RP2 3 PQ: 0 ANSI: 2 [151903.334855] sd 13:0:0:0: Attached scsi generic sg11 type 0 [151903.335083] sd 13:0:0:0: [sdl] 262144 512-byte logical blocks: (134 MB/128 MiB) [151903.336536] sd 13:0:0:0: [sdl] Write Protect is off [151903.338538] sd 13:0:0:0: [sdl] No Caching mode page found [151903.338541] sd 13:0:0:0: [sdl] Assuming drive cache: write through [151903.346579] sdl: sdl1 [151903.346758] sd 13:0:0:0: [sdl] Attached SCSI removable disk [151910.670729] usb 7-XXX.XXX.XXX.XXX: USB disconnect, device number 34 [153025.268541] usb 7-XXX.XXX.XXX.XXX: new full-speed USB device number 35 using xhci_hcd [153025.388499] usb 7-XXX.XXX.XXX.XXX: New USB device found, idVendor=2e8a, idProduct=0003, bcdDevice= 1.00 [153025.388505] usb 7-XXX.XXX.XXX.XXX: New USB device strings: Mfr=1, Product=2, SerialNumber=... [153025.388506] usb 7-XXX.XXX.XXX.XXX: Product: RP2 Boot [153025.388507] usb 7-XXX.XXX.XXX.XXX: Manufacturer: Raspberry Pi [153025.388508] usb 7-XXX.XXX.XXX.XXX: SerialNumber: ... [153025.390548] usb-storage 7-XXX.XXX.XXX.XXX:XXX.0: USB Mass Storage device detected [153025.390647] scsi host13: usb-storage 7-XXX.XXX.XXX.XXX:XXX.0 [153026.423028] scsi 13:0:0:0: Direct-Access RPI RP2 3 PQ: 0 ANSI: 2 [153026.423211] sd 13:0:0:0: Attached scsi generic sg11 type 0 [153026.423537] sd 13:0:0:0: [sdl] 262144 512-byte logical blocks: (134 MB/128 MiB) [153026.424541] sd 13:0:0:0: [sdl] Write Protect is off [153026.426533] sd 13:0:0:0: [sdl] No Caching mode page found [153026.426534] sd 13:0:0:0: [sdl] Assuming drive cache: write through [153026.434590] sdl: sdl1 [153026.434811] sd 13:0:0:0: [sdl] Attached SCSI removable disk [153142.030731] usb 7-XXX.XXX.XXX.XXX: USB disconnect, device number 35 [157253.592981] EXT4-fs (sdn1): unmounting filesystem. [166692.405874] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. [166692.405900] device-mapper: uevent: version 1.0.3 [166692.405952] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: XXX@XXX