[ 0.000000] Linux version 5.10.14_1 (XXX@XXX) (gcc (GCC) 10.2.1 20201203, GNU ld (GNU Binutils) 2.35.1) #1 SMP 1612711492 [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.10.14_1 root=UUID=HASH_049-484A-4098-DA5A-33C114431DA0 ro loglevel=4 slub_debug=P page_poison=1 [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR' [ 0.000000] x86/fpu: xstate_offset[3]: 576, xstate_sizes[3]: 64 [ 0.000000] x86/fpu: xstate_offset[4]: 640, xstate_sizes[4]: 64 [ 0.000000] x86/fpu: Enabled xstate features 0x1b, context size is 704 bytes, using 'compacted' format. [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000000fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000001000-0x000000000008ffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000090000-0x0000000000090fff] type 20 [ 0.000000] BIOS-e820: [mem 0x0000000000091000-0x000000000009efff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000008c72dfff] usable [ 0.000000] BIOS-e820: [mem 0x000000008c72e000-0x000000008df93fff] reserved [ 0.000000] BIOS-e820: [mem 0x000000008df94000-0x000000008e10afff] ACPI data [ 0.000000] BIOS-e820: [mem 0x000000008e10b000-0x000000008e16cfff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000008e16d000-0x000000008f44bfff] reserved [ 0.000000] BIOS-e820: [mem 0x000000008f44c000-0x000000008f50efff] type 20 [ 0.000000] BIOS-e820: [mem 0x000000008f50f000-0x000000008f50ffff] usable [ 0.000000] BIOS-e820: [mem 0x000000008f510000-0x000000008fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x0000000c6dffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] efi: EFI v2.70 by American Megatrends [ 0.000000] efi: ACPI 2.0=0x8e0a7000 ACPI=0x8e0a7000 SMBIOS=0x8f2a2000 SMBIOS 3.0=0x8f2a1000 MEMATTR=0x8855a018 ESRT=0x89e8b118 [ 0.000000] SMBIOS 3.2.1 present. [ 0.000000] DMI: System manufacturer System Product Name/PRIME Z390-P, BIOS 2808 05/27/2020 [ 0.000000] tsc: Detected 3700.000 MHz processor [ 0.000000] tsc: Detected 3699.850 MHz TSC [ 0.000006] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000008] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000012] last_pfn = 0xc6e000 max_arch_pfn = 0x400000000 [ 0.000015] MTRR default type: write-back [ 0.000015] MTRR fixed ranges enabled: [ 0.000016] 00000-9FFFF write-back [ 0.000017] A0000-BFFFF uncachable [ 0.000018] C0000-FFFFF write-protect [ 0.000018] MTRR variable ranges enabled: [ 0.000019] 0 base 00C0000000 mask 7FC0000000 uncachable [ 0.000020] 1 base 00A0000000 mask 7FE0000000 uncachable [ 0.000020] 2 base 0090000000 mask 7FF0000000 uncachable [ 0.000021] 3 base 2000000000 mask 6000000000 uncachable [ 0.000022] 4 base 1000000000 mask 7000000000 uncachable [ 0.000022] 5 base 4000000000 mask 4000000000 uncachable [ 0.000023] 6 disabled [ 0.000023] 7 disabled [ 0.000023] 8 disabled [ 0.000024] 9 disabled [ 0.000387] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.000631] last_pfn = 0x8f510 max_arch_pfn = 0x400000000 [ 0.006298] esrt: Reserving ESRT space from 0x0000000089e8b118 to 0x0000000089e8b150. [ 0.006300] e820: update [mem 0x89e8b000-0x89e8bfff] usable ==> reserved [ 0.006310] check: Scanning 1 areas for low memory corruption [ 0.006321] Using GB pages for direct mapping [ 0.006682] Secure boot could not be determined [ 0.006682] RAMDISK: [mem 0x310ab000-0x3484cfff] [ 0.006691] ACPI: Early table checksum verification disabled [ 0.006693] ACPI: RSDP 0x000000008E0A7000 000024 (v02 ALASKA) [ 0.006695] ACPI: XSDT 0x000000008E0A70B0 0000D4 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.006699] ACPI: FACP 0x000000008E0E76D8 000114 (v06 ALASKA A M I 01072009 AMI 00010013) [ 0.006703] ACPI: DSDT 0x000000008E0A7218 0404C0 (v02 ALASKA A M I 01072009 INTL 20160527) [ 0.006705] ACPI: FACS 0x000000008E16C080 000040 [ 0.006707] ACPI: APIC 0x000000008E0E77F0 000084 (v04 ALASKA A M I 01072009 AMI 00010013) [ 0.006709] ACPI: FPDT 0x000000008E0E7878 000044 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.006711] ACPI: FIDT 0x000000008E0E78C0 00009C (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.006713] ACPI: MCFG 0x000000008E0E7960 00003C (v01 ALASKA A M I 01072009 MSFT 00000097) [ 0.006715] ACPI: WSMT 0x000000008E0F6910 000028 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.006716] ACPI: SSDT 0x000000008E0E79F8 001B1C (v02 CpuRef CpuSsdt 00003000 INTL 20160527) [ 0.006719] ACPI: SSDT 0x000000008E0E9518 003099 (v02 SaSsdt SaSsdt 00003000 INTL 20160527) [ 0.006721] ACPI: SSDT 0x000000008E0EC5B8 00232B (v02 PegSsd PegSsdt 00001000 INTL 20160527) [ 0.006723] ACPI: HPET 0x000000008E0EE8E8 000038 (v01 ALASKA A M I 00000002 01000013) [ 0.006725] ACPI: SSDT 0x000000008E0EE920 000FAE (v02 ALASKA Ther_Rvp 00001000 INTL 20160527) [ 0.006727] ACPI: SSDT 0x000000008E0EF8D0 002FD1 (v02 INTEL xh_cfsd4 00000000 INTL 20160527) [ 0.006729] ACPI: UEFI 0x000000008E0F28A8 000042 (v01 ALASKA A M I 00000002 01000013) [ 0.006730] ACPI: LPIT 0x000000008E0F28F0 000094 (v01 ALASKA A M I 00000002 01000013) [ 0.006732] ACPI: SSDT 0x000000008E0F2988 0027DE (v02 ALASKA PtidDevc 00001000 INTL 20160527) [ 0.006734] ACPI: SSDT 0x000000008E0F5168 0014E2 (v02 ALASKA TbtTypeC 00000000 INTL 20160527) [ 0.006736] ACPI: DBGP 0x000000008E0F6650 000034 (v01 ALASKA A M I 00000002 01000013) [ 0.006738] ACPI: DBG2 0x000000008E0F6688 000054 (v00 ALASKA A M I 00000002 01000013) [ 0.006740] ACPI: DMAR 0x000000008E0F66E0 000070 (v01 INTEL EDK2 00000002 01000013) [ 0.006742] ACPI: SSDT 0x000000008E0F6750 000144 (v02 Intel ADebTabl 00001000 INTL 20160527) [ 0.006744] ACPI: BGRT 0x000000008E0F6898 000038 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.006746] ACPI: WPBT 0x000000008E0F68D0 00003C (v01 ALASKA A M I 00000001 ASUS 00000001) [ 0.006752] ACPI: Local APIC address 0xfee00000 [ 0.006888] No NUMA configuration found [ 0.006889] Faking a node at [mem 0x0000000000000000-0x0000000c6dffffff] [ 0.006891] NODE_DATA(0) allocated [mem 0xc6dffb000-0xc6dffffff] [ 0.006929] Zone ranges: [ 0.006930] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.006931] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.006932] Normal [mem 0x0000000100000000-0x0000000c6dffffff] [ 0.006933] Device empty [ 0.006934] Movable zone start for each node [ 0.006934] Early memory node ranges [ 0.006935] node 0: [mem 0x0000000000001000-0x000000000008ffff] [ 0.006936] node 0: [mem 0x0000000000091000-0x000000000009efff] [ 0.006936] node 0: [mem 0x0000000000100000-0x000000008c72dfff] [ 0.006937] node 0: [mem 0x000000008f50f000-0x000000008f50ffff] [ 0.006937] node 0: [mem 0x0000000100000000-0x0000000c6dffffff] [ 0.007081] Zeroed struct page in unavailable ranges: 22836 pages [ 0.007082] Initmem setup node 0 [mem 0x0000000000001000-0x0000000c6dffffff] [ 0.007083] On node 0 totalpages: 12560076 [ 0.007084] DMA zone: 64 pages used for memmap [ 0.007084] DMA zone: 23 pages reserved [ 0.007085] DMA zone: 3997 pages, LIFO batch:0 [ 0.007102] DMA32 zone: 8925 pages used for memmap [ 0.007103] DMA32 zone: 571183 pages, LIFO batch:63 [ 0.009636] Normal zone: 187264 pages used for memmap [ 0.009636] Normal zone: 11984896 pages, LIFO batch:63 [ 0.063163] ACPI: PM-Timer IO Port: 0x1808 [ 0.063165] ACPI: Local APIC address 0xfee00000 [ 0.063168] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.063169] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.063169] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.063170] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) [ 0.063209] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119 [ 0.063210] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.063211] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.063212] ACPI: IRQ0 used by override. [ 0.063213] ACPI: IRQ9 used by override. [ 0.063214] Using ACPI (MADT) for SMP configuration information [ 0.063215] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.063219] e820: update [mem 0x8732a000-0x873e4fff] usable ==> reserved [ 0.063225] TSC deadline timer available [ 0.063226] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.063238] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.063239] PM: hibernation: Registered nosave memory: [mem 0x00090000-0x00090fff] [ 0.063240] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000fffff] [ 0.063241] PM: hibernation: Registered nosave memory: [mem 0x8732a000-0x873e4fff] [ 0.063242] PM: hibernation: Registered nosave memory: [mem 0x89e8b000-0x89e8bfff] [ 0.063243] PM: hibernation: Registered nosave memory: [mem 0x8c72e000-0x8df93fff] [ 0.063244] PM: hibernation: Registered nosave memory: [mem 0x8df94000-0x8e10afff] [ 0.063244] PM: hibernation: Registered nosave memory: [mem 0x8e10b000-0x8e16cfff] [ 0.063245] PM: hibernation: Registered nosave memory: [mem 0x8e16d000-0x8f44bfff] [ 0.063245] PM: hibernation: Registered nosave memory: [mem 0x8f44c000-0x8f50efff] [ 0.063246] PM: hibernation: Registered nosave memory: [mem 0x8f510000-0x8fffffff] [ 0.063247] PM: hibernation: Registered nosave memory: [mem 0x90000000-0xdfffffff] [ 0.063247] PM: hibernation: Registered nosave memory: [mem 0xe0000000-0xefffffff] [ 0.063248] PM: hibernation: Registered nosave memory: [mem 0xf0000000-0xfdffffff] [ 0.063248] PM: hibernation: Registered nosave memory: [mem 0xfe000000-0xfe010fff] [ 0.063249] PM: hibernation: Registered nosave memory: [mem 0xfe011000-0xfebfffff] [ 0.063249] PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.063249] PM: hibernation: Registered nosave memory: [mem 0xfec01000-0xfecfffff] [ 0.063250] PM: hibernation: Registered nosave memory: [mem 0xfed00000-0xfed03fff] [ 0.063250] PM: hibernation: Registered nosave memory: [mem 0xfed04000-0xfedfffff] [ 0.063251] PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.063251] PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xfeffffff] [ 0.063252] PM: hibernation: Registered nosave memory: [mem 0xff000000-0xffffffff] [ 0.063253] [mem 0x90000000-0xdfffffff] available for PCI devices [ 0.063253] Booting paravirtualized kernel on bare hardware [ 0.063255] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.066437] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1 [ 0.066531] percpu: Embedded 55 pages/cpu s184664 r8192 d32424 u524288 [ 0.066535] pcpu-alloc: s184664 r8192 d32424 u524288 alloc=1*2097152 [ 0.066536] pcpu-alloc: [0] 0 1 2 3 [ 0.066551] Built 1 zonelists, mobility grouping on. Total pages: 12363800 [ 0.066551] Policy zone: Normal [ 0.066552] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.10.14_1 root=UUID=HASH_049-484A-4098-DA5A-33C114431DA0 ro loglevel=4 slub_debug=P page_poison=1 [ 0.068669] Dentry cache hash table entries: 8388608 (order: 14, 67108864 bytes, linear) [ 0.069709] Inode-cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear) [ 0.069738] mem auto-init: stack:off, heap alloc:off, heap free:off [ 2.554275] Memory: 49123624K/50240304K available (12295K kernel code, 3230K rwdata, 6444K rodata, 1600K init, 1688K bss, 1116420K reserved, 0K cma-reserved) [ 2.554281] random: get_random_u64 called from __kmem_cache_create+0x2e/0x540 with crng_init=0 [ 2.554410] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 2.554418] Kernel/User page tables isolation: enabled [ 2.554428] ftrace: allocating 37326 entries in 146 pages [ 2.563684] ftrace: allocated 146 pages with 3 groups [ 2.563763] rcu: Hierarchical RCU implementation. [ 2.563763] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4. [ 2.563764] Trampoline variant of Tasks RCU enabled. [ 2.563764] Rude variant of Tasks RCU enabled. [ 2.563765] Tracing variant of Tasks RCU enabled. [ 2.563765] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 2.563766] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 2.568761] NR_IRQS: 16640, nr_irqs: 1024, preallocated irqs: 16 [ 2.569299] Console: colour dummy device 80x25 [ 2.569308] printk: console [tty0] enabled [ 2.569325] ACPI: Core revision 20200925 [ 2.569671] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns [ 2.569759] APIC: Switch to symmetric I/O mode setup [ 2.569761] DMAR: Host address width 39 [ 2.569762] DMAR: DRHD base: 0x000000fed91000 flags: 0x1 [ 2.569768] DMAR: dmar0: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da [ 2.569769] DMAR: RMRR base: 0x0000008cf45000 end: 0x0000008cf64fff [ 2.569773] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 0 [ 2.569774] DMAR-IR: HPET id 0 under DRHD base 0xfed91000 [ 2.569774] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. [ 2.571081] DMAR-IR: Enabled IRQ remapping in x2apic mode [ 2.571082] x2apic enabled [ 2.571107] Switched APIC routing to cluster x2apic. [ 2.575619] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 2.579715] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x6aa99074b1c, max_idle_ns: 881590506587 ns [ 2.579717] Calibrating delay loop (skipped), value calculated using timer frequency.. 7399.70 BogoMIPS (lpj=3699850) [ 2.579719] pid_max: default: 32768 minimum: 301 [ 2.584442] efi: memattr: Entry attributes invalid: RO and XP bits both cleared [ 2.584446] efi: memattr: ! 0x000000090000-0x000000090fff [Runtime Code|RUN| | | | | | | | | | | | | ] [ 2.584770] LSM: Security Framework initializing [ 2.584775] Yama: becoming mindful. [ 2.584797] Mount-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 2.584800] Mountpoint-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 2.585125] mce: CPU0: Thermal monitoring enabled (TM1) [ 2.585140] process: using mwait in idle threads [ 2.585142] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8 [ 2.585142] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4 [ 2.585144] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 2.585145] Spectre V2 : Mitigation: Full generic retpoline [ 2.585145] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 2.585146] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 2.585147] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 2.585147] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl [ 2.585148] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp [ 2.585152] SRBDS: Mitigation: Microcode [ 2.585152] MDS: Mitigation: Clear CPU buffers [ 2.585263] Freeing SMP alternatives memory: 32K [ 2.586791] smpboot: CPU0: Intel(R) Pentium(R) Gold G5400 CPU @ 3.70GHz (family: 0x6, model: 0x9e, stepping: 0xa) [ 2.586898] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver. [ 2.586908] ... version: 4 [ 2.586908] ... bit width: 48 [ 2.586909] ... generic registers: 4 [ 2.586909] ... value mask: 0000ffffffffffff [ 2.586910] ... max period: 00007fffffffffff [ 2.586910] ... fixed-purpose events: 3 [ 2.586910] ... event mask: 000000070000000f [ 2.586982] rcu: Hierarchical SRCU implementation. [ 2.587658] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 2.587711] smp: Bringing up secondary CPUs ... [ 2.587727] x86: Booting SMP configuration: [ 2.587728] .... node #0, CPUs: #1 #2 [ 2.588093] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details. [ 2.588093] #3 [ 2.588782] smp: Brought up 1 node, 4 CPUs [ 2.588782] smpboot: Max logical packages: 1 [ 2.588782] smpboot: Total of 4 processors activated (29598.80 BogoMIPS) [ 2.590513] devtmpfs: initialized [ 2.590513] x86/mm: Memory block size: 128MB [ 2.595868] PM: Registering ACPI NVS region [mem 0x8e10b000-0x8e16cfff] (401408 bytes) [ 2.595868] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 2.595868] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 2.595900] pinctrl core: initialized pinctrl subsystem [ 2.596094] NET: Registered protocol family 16 [ 2.596290] thermal_sys: Registered thermal governor 'bang_bang' [ 2.596290] thermal_sys: Registered thermal governor 'step_wise' [ 2.596290] thermal_sys: Registered thermal governor 'user_space' [ 2.596290] thermal_sys: Registered thermal governor 'power_allocator' [ 2.596290] cpuidle: using governor ladder [ 2.596290] cpuidle: using governor menu [ 2.596290] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 2.596290] ACPI: bus type PCI registered [ 2.596290] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 2.596834] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 2.596835] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 2.596846] PCI: Using configuration type 1 for base access [ 2.598613] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 2.600170] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 2.600170] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 2.600899] ACPI: Added _OSI(Module Device) [ 2.600899] ACPI: Added _OSI(Processor Device) [ 2.600900] ACPI: Added _OSI(3.0 _SCP Extensions) [ 2.600900] ACPI: Added _OSI(Processor Aggregator Device) [ 2.600902] ACPI: Added _OSI(Linux-Dell-Video) [ 2.600903] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 2.600905] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) [ 2.791764] ACPI: 9 ACPI AML tables successfully acquired and loaded [ 2.806823] ACPI: Dynamic OEM Table Load: [ 2.806827] ACPI: SSDT 0xFFFF8A81C0F19C00 0000F4 (v02 PmRef Cpu0Psd 00003000 INTL 20160527) [ 2.808037] ACPI: \_SB_.PR00: _OSC native thermal LVT Acked [ 2.812908] ACPI: Dynamic OEM Table Load: [ 2.812911] ACPI: SSDT 0xFFFF8A81C0E6B000 000400 (v02 PmRef Cpu0Cst 00003001 INTL 20160527) [ 2.814222] ACPI: Dynamic OEM Table Load: [ 2.814225] ACPI: SSDT 0xFFFF8A81C0F26000 0006CB (v02 PmRef Cpu0Ist 00003000 INTL 20160527) [ 2.816049] ACPI: Dynamic OEM Table Load: [ 2.816052] ACPI: SSDT 0xFFFF8A81C0F1D000 000133 (v02 PmRef Cpu0Hwp 00003000 INTL 20160527) [ 2.817079] ACPI: Dynamic OEM Table Load: [ 2.817084] ACPI: SSDT 0xFFFF8A81C0F27000 000724 (v02 PmRef HwpLvt 00003000 INTL 20160527) [ 2.818752] ACPI: Dynamic OEM Table Load: [ 2.818755] ACPI: SSDT 0xFFFF8A81C10A9000 0005FC (v02 PmRef ApIst 00003000 INTL 20160527) [ 2.820443] ACPI: Dynamic OEM Table Load: [ 2.820446] ACPI: SSDT 0xFFFF8A81C0E6E000 000317 (v02 PmRef ApHwp 00003000 INTL 20160527) [ 2.821813] ACPI: Dynamic OEM Table Load: [ 2.821817] ACPI: SSDT 0xFFFF8A81C0B42000 000AB0 (v02 PmRef ApPsd 00003000 INTL 20160527) [ 2.825487] ACPI: Dynamic OEM Table Load: [ 2.825490] ACPI: SSDT 0xFFFF8A81C0E6B800 00030A (v02 PmRef ApCst 00003000 INTL 20160527) [ 2.835435] ACPI: Interpreter enabled [ 2.835481] ACPI: (supports S0 S3 S4 S5) [ 2.835482] ACPI: Using IOAPIC for interrupt routing [ 2.835539] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 2.839091] ACPI: Enabled 7 GPEs in block 00 to 7F [ 2.884374] ACPI: Power Resource [USBC] (on) [ 2.901872] ACPI: Power Resource [V0PR] (on) [ 2.903032] ACPI: Power Resource [V1PR] (on) [ 2.904183] ACPI: Power Resource [V2PR] (on) [ 2.922905] ACPI: Power Resource [WRST] (on) [ 2.938242] ACPI: Power Resource [FN00] (off) [ 2.938524] ACPI: Power Resource [FN01] (off) [ 2.938796] ACPI: Power Resource [FN02] (off) [ 2.939065] ACPI: Power Resource [FN03] (off) [ 2.939330] ACPI: Power Resource [FN04] (off) [ 2.940357] ACPI: Power Resource [PIN] (off) [ 2.941466] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 2.941472] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 2.942030] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME] [ 2.942564] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability LTR] [ 2.942565] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 2.944553] PCI host bridge to bus 0000:00 [ 2.944555] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 2.944556] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 2.944558] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 2.944559] pci_bus 0000:00: root bus resource [mem 0x90000000-0xdfffffff window] [ 2.944561] pci_bus 0000:00: root bus resource [mem 0xfc800000-0xfe7fffff window] [ 2.944562] pci_bus 0000:00: root bus resource [bus 00-fe] [ 2.944585] pci 0000:00:00.0: [8086:3e0f] type 00 class 0x060000 [ 2.945298] pci 0000:00:01.0: [8086:1901] type 01 class 0x060400 [ 2.945334] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 2.945872] pci 0000:00:14.0: [8086:a36d] type 00 class 0x0c0330 [ 2.945885] pci 0000:00:14.0: reg 0x10: [mem 0xa3300000-0xa330ffff 64bit] [ 2.945942] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 2.946651] pci 0000:00:14.2: [8086:a36f] type 00 class 0x050000 [ 2.946665] pci 0000:00:14.2: reg 0x10: [mem 0xa3316000-0xa3317fff 64bit] [ 2.946674] pci 0000:00:14.2: reg 0x18: [mem 0xa331c000-0xa331cfff 64bit] [ 2.946921] pci 0000:00:16.0: [8086:a360] type 00 class 0x078000 [ 2.946938] pci 0000:00:16.0: reg 0x10: [mem 0xa331b000-0xa331bfff 64bit] [ 2.947006] pci 0000:00:16.0: PME# supported from D3hot [ 2.947398] pci 0000:00:17.0: [8086:a352] type 00 class 0x010601 [ 2.947408] pci 0000:00:17.0: reg 0x10: [mem 0xa3314000-0xa3315fff] [ 2.947414] pci 0000:00:17.0: reg 0x14: [mem 0xa331a000-0xa331a0ff] [ 2.947420] pci 0000:00:17.0: reg 0x18: [io 0x6050-0x6057] [ 2.947425] pci 0000:00:17.0: reg 0x1c: [io 0x6040-0x6043] [ 2.947431] pci 0000:00:17.0: reg 0x20: [io 0x6020-0x603f] [ 2.947436] pci 0000:00:17.0: reg 0x24: [mem 0xa3319000-0xa33197ff] [ 2.947471] pci 0000:00:17.0: PME# supported from D3hot [ 2.947846] pci 0000:00:1b.0: [8086:a340] type 01 class 0x060400 [ 2.947924] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 2.948352] pci 0000:00:1c.0: [8086:a338] type 01 class 0x060400 [ 2.948429] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 2.948882] pci 0000:00:1c.4: [8086:a33c] type 01 class 0x060400 [ 2.948955] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 2.949399] pci 0000:00:1c.5: [8086:a33d] type 01 class 0x060400 [ 2.949471] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold [ 2.949914] pci 0000:00:1d.0: [8086:a330] type 01 class 0x060400 [ 2.949992] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 2.950429] pci 0000:00:1f.0: [8086:a305] type 00 class 0x060100 [ 2.950884] pci 0000:00:1f.3: [8086:a348] type 00 class 0x040300 [ 2.950913] pci 0000:00:1f.3: reg 0x10: [mem 0xa3310000-0xa3313fff 64bit] [ 2.950950] pci 0000:00:1f.3: reg 0x20: [mem 0xa3100000-0xa31fffff 64bit] [ 2.951028] pci 0000:00:1f.3: PME# supported from D3hot D3cold [ 2.952249] pci 0000:00:1f.4: [8086:a323] type 00 class 0x0c0500 [ 2.952272] pci 0000:00:1f.4: reg 0x10: [mem 0xa3318000-0xa33180ff 64bit] [ 2.952298] pci 0000:00:1f.4: reg 0x20: [io 0xefa0-0xefbf] [ 2.952594] pci 0000:00:1f.5: [8086:a324] type 00 class 0x0c8000 [ 2.952607] pci 0000:00:1f.5: reg 0x10: [mem 0xfe010000-0xfe010fff] [ 2.952882] pci 0000:01:00.0: [10de:1d01] type 00 class 0x030000 [ 2.952892] pci 0000:01:00.0: reg 0x10: [mem 0xa2000000-0xa2ffffff] [ 2.952901] pci 0000:01:00.0: reg 0x14: [mem 0x90000000-0x9fffffff 64bit pref] [ 2.952910] pci 0000:01:00.0: reg 0x1c: [mem 0xa0000000-0xa1ffffff 64bit pref] [ 2.952916] pci 0000:01:00.0: reg 0x24: [io 0x5000-0x507f] [ 2.952921] pci 0000:01:00.0: reg 0x30: [mem 0xa3000000-0xa307ffff pref] [ 2.952942] pci 0000:01:00.0: BAR 1: assigned to efifb [ 2.953010] pci 0000:01:00.0: 8.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x4 link at 0000:00:01.0 (capable of 31.504 Gb/s with 8.0 GT/s PCIe x4 link) [ 2.953084] pci 0000:01:00.1: [10de:0fb8] type 00 class 0x040300 [ 2.953092] pci 0000:01:00.1: reg 0x10: [mem 0xa3080000-0xa3083fff] [ 2.953222] pci 0000:00:01.0: PCI bridge to [bus 01] [ 2.953223] pci 0000:00:01.0: bridge window [io 0x5000-0x5fff] [ 2.953224] pci 0000:00:01.0: bridge window [mem 0xa2000000-0xa30fffff] [ 2.953227] pci 0000:00:01.0: bridge window [mem 0x90000000-0xa1ffffff 64bit pref] [ 2.953341] acpiphp: Slot [1] registered [ 2.953349] pci 0000:00:1b.0: PCI bridge to [bus 02] [ 2.953460] acpiphp: Slot [1-1] registered [ 2.953467] pci 0000:00:1c.0: PCI bridge to [bus 03] [ 2.953584] pci 0000:04:00.0: [10ec:8168] type 00 class 0x020000 [ 2.953601] pci 0000:04:00.0: reg 0x10: [io 0x4000-0x40ff] [ 2.953625] pci 0000:04:00.0: reg 0x18: [mem 0xa3204000-0xa3204fff 64bit] [ 2.953640] pci 0000:04:00.0: reg 0x20: [mem 0xa3200000-0xa3203fff 64bit] [ 2.953743] pci 0000:04:00.0: supports D1 D2 [ 2.953744] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 2.953880] pci 0000:00:1c.4: PCI bridge to [bus 04] [ 2.953882] pci 0000:00:1c.4: bridge window [io 0x4000-0x4fff] [ 2.953884] pci 0000:00:1c.4: bridge window [mem 0xa3200000-0xa32fffff] [ 2.954053] pci 0000:05:00.0: [1b21:1080] type 01 class 0x060400 [ 2.954210] pci 0000:05:00.0: supports D1 D2 [ 2.954211] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 2.954320] pci 0000:00:1c.5: PCI bridge to [bus 05-06] [ 2.954321] pci 0000:00:1c.5: bridge window [io 0x3000-0x3fff] [ 2.954374] pci_bus 0000:06: extended config space not accessible [ 2.954418] pci 0000:06:04.0: [13f6:8788] type 00 class 0x040100 [ 2.954437] pci 0000:06:04.0: reg 0x10: [io 0x3000-0x30ff] [ 2.954562] pci 0000:06:04.0: supports D1 D2 [ 2.954653] pci 0000:05:00.0: PCI bridge to [bus 06] [ 2.954660] pci 0000:05:00.0: bridge window [io 0x3000-0x3fff] [ 2.954856] acpiphp: Slot [1-2] registered [ 2.954864] pci 0000:00:1d.0: PCI bridge to [bus 07] [ 2.959243] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *0 [ 2.959442] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *1 [ 2.959640] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0 [ 2.959837] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0 [ 2.960034] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0 [ 2.960230] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0 [ 2.960427] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0 [ 2.960624] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0 [ 2.962378] iommu: Default domain type: Translated [ 2.962398] pci 0000:01:00.0: vgaarb: setting as boot VGA device [ 2.962398] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 2.962398] pci 0000:01:00.0: vgaarb: bridge control possible [ 2.962398] vgaarb: loaded [ 2.962398] pps_core: LinuxPPS API ver. 1 registered [ 2.962398] pps_core: Software ver. 5.3.6 - Copyright 0FB6-08D5 Rodolfo Giometti <XXX@XXX> [ 2.962398] PTP clock support registered [ 2.962398] EDAC MC: Ver: 3.0.0 [ 2.962743] Registered efivars operations [ 2.962897] PCI: Using ACPI for IRQ routing [ 3.004770] PCI: pci_cache_line_size set to 64 bytes [ 3.004852] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff] [ 3.004854] e820: reserve RAM buffer [mem 0x8732a000-0x87ffffff] [ 3.004855] e820: reserve RAM buffer [mem 0x89e8b000-0x8bffffff] [ 3.004856] e820: reserve RAM buffer [mem 0x8c72e000-0x8fffffff] [ 3.004857] e820: reserve RAM buffer [mem 0x8f510000-0x8fffffff] [ 3.004858] e820: reserve RAM buffer [mem 0xc6e000000-0xc6fffffff] [ 3.005752] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 3.005756] hpet0: 8 comparators, 64-bit 24.000000 MHz counter [ 3.009730] clocksource: Switched to clocksource tsc-early [ 3.020936] VFS: Disk quotas dquot_6.6.0 [ 3.020945] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 3.021020] pnp: PnP ACPI init [ 3.021228] system 00:00: [mem 0x40000000-0x403fffff] could not be reserved [ 3.021232] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 3.021722] system 00:01: [io 0x0290-0x029f] has been reserved [ 3.021725] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 3.021816] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) [ 3.022624] pnp 00:03: [dma 0 disabled] [ 3.022668] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active) [ 3.022860] system 00:04: [io 0x0680-0x069f] has been reserved [ 3.022863] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 3.023104] system 00:05: [io 0x1854-0x1857] has been reserved [ 3.023107] system 00:05: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 3.023696] system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved [ 3.023698] system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved [ 3.023699] system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved [ 3.023701] system 00:06: [mem 0xe0000000-0xefffffff] has been reserved [ 3.023703] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved [ 3.023708] system 00:06: [mem 0xfed90000-0xfed93fff] could not be reserved [ 3.023710] system 00:06: [mem 0xfed45000-0xfed8ffff] has been reserved [ 3.023712] system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved [ 3.023715] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 3.024172] system 00:07: [io 0x1800-0x18fe] could not be reserved [ 3.024175] system 00:07: [mem 0xfd000000-0xfd69ffff] has been reserved [ 3.024177] system 00:07: [mem 0xfd6c0000-0xfd6cffff] has been reserved [ 3.024179] system 00:07: [mem 0xfd6f0000-0xfdffffff] has been reserved [ 3.024182] system 00:07: [mem 0xfe000000-0xfe01ffff] could not be reserved [ 3.024184] system 00:07: [mem 0xfe200000-0xfe7fffff] has been reserved [ 3.024186] system 00:07: [mem 0xff000000-0xffffffff] has been reserved [ 3.024188] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 3.024835] system 00:08: [io 0x2000-0x20fe] has been reserved [ 3.024837] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) [ 3.027988] system 00:09: [mem 0xfd6e0000-0xfd6effff] has been reserved [ 3.027990] system 00:09: [mem 0xfd6d0000-0xfd6dffff] has been reserved [ 3.027992] system 00:09: [mem 0xfd6b0000-0xfd6bffff] has been reserved [ 3.027994] system 00:09: [mem 0xfd6a0000-0xfd6affff] has been reserved [ 3.027996] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) [ 3.030092] pnp: PnP ACPI: found 10 devices [ 3.036382] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 3.036470] NET: Registered protocol family 2 [ 3.036584] tcp_listen_portaddr_hash hash table entries: 32768 (order: 7, 524288 bytes, linear) [ 3.036635] TCP established hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 3.036953] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 3.037023] TCP: Hash tables configured (established 524288 bind 65536) [ 3.037082] MPTCP token hash table entries: 65536 (order: 8, 1572864 bytes, linear) [ 3.037206] UDP hash table entries: 32768 (order: 8, 1048576 bytes, linear) [ 3.037286] UDP-Lite hash table entries: 32768 (order: 8, 1048576 bytes, linear) [ 3.037395] NET: Registered protocol family 1 [ 3.037398] NET: Registered protocol family 44 [ 3.037405] pci 0000:00:1b.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000 [ 3.037407] pci 0000:00:1b.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000 [ 3.037408] pci 0000:00:1b.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000 add_align 100000 [ 3.037410] pci 0000:00:1d.0: bridge window [io 0x1000-0x0fff] to [bus 07] add_size 1000 [ 3.037413] pci 0000:00:1d.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 07] add_size 200000 add_align 100000 [ 3.037414] pci 0000:00:1d.0: bridge window [mem 0x00100000-0x000fffff] to [bus 07] add_size 200000 add_align 100000 [ 3.037426] pci 0000:00:1b.0: BAR 14: assigned [mem 0xa3400000-0xa35fffff] [ 3.037429] pci 0000:00:1b.0: BAR 15: assigned [mem 0xa3600000-0xa37fffff 64bit pref] [ 3.037430] pci 0000:00:1d.0: BAR 14: assigned [mem 0xa3800000-0xa39fffff] [ 3.037432] pci 0000:00:1d.0: BAR 15: assigned [mem 0xa3a00000-0xa3bfffff 64bit pref] [ 3.037434] pci 0000:00:1b.0: BAR 13: assigned [io 0x7000-0x7fff] [ 3.037435] pci 0000:00:1d.0: BAR 13: assigned [io 0x8000-0x8fff] [ 3.037438] pci 0000:00:01.0: PCI bridge to [bus 01] [ 3.037439] pci 0000:00:01.0: bridge window [io 0x5000-0x5fff] [ 3.037441] pci 0000:00:01.0: bridge window [mem 0xa2000000-0xa30fffff] [ 3.037442] pci 0000:00:01.0: bridge window [mem 0x90000000-0xa1ffffff 64bit pref] [ 3.037444] pci 0000:00:1b.0: PCI bridge to [bus 02] [ 3.037451] pci 0000:00:1b.0: bridge window [io 0x7000-0x7fff] [ 3.037454] pci 0000:00:1b.0: bridge window [mem 0xa3400000-0xa35fffff] [ 3.037456] pci 0000:00:1b.0: bridge window [mem 0xa3600000-0xa37fffff 64bit pref] [ 3.037460] pci 0000:00:1c.0: PCI bridge to [bus 03] [ 3.037469] pci 0000:00:1c.4: PCI bridge to [bus 04] [ 3.037470] pci 0000:00:1c.4: bridge window [io 0x4000-0x4fff] [ 3.037473] pci 0000:00:1c.4: bridge window [mem 0xa3200000-0xa32fffff] [ 3.037477] pci 0000:05:00.0: PCI bridge to [bus 06] [ 3.037479] pci 0000:05:00.0: bridge window [io 0x3000-0x3fff] [ 3.037493] pci 0000:00:1c.5: PCI bridge to [bus 05-06] [ 3.037495] pci 0000:00:1c.5: bridge window [io 0x3000-0x3fff] [ 3.037501] pci 0000:00:1d.0: PCI bridge to [bus 07] [ 3.037504] pci 0000:00:1d.0: bridge window [io 0x8000-0x8fff] [ 3.037506] pci 0000:00:1d.0: bridge window [mem 0xa3800000-0xa39fffff] [ 3.037509] pci 0000:00:1d.0: bridge window [mem 0xa3a00000-0xa3bfffff 64bit pref] [ 3.037513] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 3.037514] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 3.037514] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 3.037515] pci_bus 0000:00: resource 7 [mem 0x90000000-0xdfffffff window] [ 3.037516] pci_bus 0000:00: resource 8 [mem 0xfc800000-0xfe7fffff window] [ 3.037516] pci_bus 0000:01: resource 0 [io 0x5000-0x5fff] [ 3.037517] pci_bus 0000:01: resource 1 [mem 0xa2000000-0xa30fffff] [ 3.037518] pci_bus 0000:01: resource 2 [mem 0x90000000-0xa1ffffff 64bit pref] [ 3.037518] pci_bus 0000:02: resource 0 [io 0x7000-0x7fff] [ 3.037519] pci_bus 0000:02: resource 1 [mem 0xa3400000-0xa35fffff] [ 3.037520] pci_bus 0000:02: resource 2 [mem 0xa3600000-0xa37fffff 64bit pref] [ 3.037520] pci_bus 0000:04: resource 0 [io 0x4000-0x4fff] [ 3.037521] pci_bus 0000:04: resource 1 [mem 0xa3200000-0xa32fffff] [ 3.037522] pci_bus 0000:05: resource 0 [io 0x3000-0x3fff] [ 3.037522] pci_bus 0000:06: resource 0 [io 0x3000-0x3fff] [ 3.037523] pci_bus 0000:07: resource 0 [io 0x8000-0x8fff] [ 3.037524] pci_bus 0000:07: resource 1 [mem 0xa3800000-0xa39fffff] [ 3.037524] pci_bus 0000:07: resource 2 [mem 0xa3a00000-0xa3bfffff 64bit pref] [ 3.038450] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 3.038479] pci 0000:01:00.1: D0 power state depends on 0000:01:00.0 [ 3.038488] pci 0000:05:00.0: Disabling ASPM L0s/L1 [ 3.038489] pci 0000:05:00.0: can't disable ASPM; OS doesn't have ASPM control [ 3.038494] PCI: CLS 64 bytes, default 64 [ 3.038558] Trying to unpack rootfs image as initramfs... [ 3.483612] Freeing initrd memory: 56968K [ 3.483653] DMAR: No ATSR found [ 3.483705] DMAR: dmar0: Using Queued invalidation [ 3.483775] pci 0000:00:00.0: Adding to iommu group 0 [ 3.483794] pci 0000:00:01.0: Adding to iommu group 1 [ 3.483813] pci 0000:00:14.0: Adding to iommu group 2 [ 3.483823] pci 0000:00:14.2: Adding to iommu group 2 [ 3.483840] pci 0000:00:16.0: Adding to iommu group 3 [ 3.483855] pci 0000:00:17.0: Adding to iommu group 4 [ 3.483872] pci 0000:00:1b.0: Adding to iommu group 5 [ 3.483894] pci 0000:00:1c.0: Adding to iommu group 6 [ 3.483915] pci 0000:00:1c.4: Adding to iommu group 7 [ 3.483934] pci 0000:00:1c.5: Adding to iommu group 8 [ 3.483949] pci 0000:00:1d.0: Adding to iommu group 9 [ 3.483975] pci 0000:00:1f.0: Adding to iommu group 10 [ 3.483990] pci 0000:00:1f.3: Adding to iommu group 10 [ 3.484004] pci 0000:00:1f.4: Adding to iommu group 10 [ 3.484017] pci 0000:00:1f.5: Adding to iommu group 10 [ 3.484027] pci 0000:01:00.0: Adding to iommu group 1 [ 3.484037] pci 0000:01:00.1: Adding to iommu group 1 [ 3.484059] pci 0000:04:00.0: Adding to iommu group 11 [ 3.484084] pci 0000:05:00.0: Adding to iommu group 12 [ 3.484094] pci 0000:06:04.0: Adding to iommu group 12 [ 3.485776] DMAR: Intel(R) Virtualization Technology for Directed I/O [ 3.485777] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 3.485778] software IO TLB: mapped [mem 0x000000008332a000-0x000000008732a000] (64MB) [ 3.485932] platform rtc_cmos: registered platform RTC device (no PNP device found) [ 3.485991] check: Scanning for low memory corruption every 60 seconds [ 3.486410] Initialise system trusted keyrings [ 3.486455] workingset: timestamp_bits=40 max_order=24 bucket_order=0 [ 3.488768] zbud: loaded [ 3.489092] Key type asymmetric registered [ 3.489092] Asymmetric key parser 'x509' registered [ 3.489102] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246) [ 3.489127] io scheduler mq-deadline registered [ 3.489127] io scheduler kyber registered [ 3.489172] io scheduler bfq registered [ 3.490049] pcieport 0000:00:1c.4: AER: enabled with IRQ 124 [ 3.490371] pcieport 0000:00:1c.5: AER: enabled with IRQ 125 [ 3.490570] efifb: probing for efifb [ 3.490586] efifb: Ignoring BGRT: unexpected or invalid BMP data [ 3.490587] efifb: framebuffer at 0x90000000, using 3072k, total 3072k [ 3.490587] efifb: mode is 1024x768x32, linelength=4096, pages=1 [ 3.490588] efifb: scrolling: redraw [ 3.490588] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 3.490626] fbcon: Deferring console take-over [ 3.490626] fb0: EFI VGA frame buffer device [ 3.490633] intel_idle: MWAIT substates: 0x11142120 [ 3.490634] intel_idle: v0.5.1 model 0x9E [ 3.491135] intel_idle: Local APIC timer is reliable in all C-states [ 3.492403] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 3.513656] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 3.514737] e1000e: Intel(R) PRO/1000 Network Driver [ 3.514737] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 3.514790] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 3.514790] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 3.515493] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 3.515572] mousedev: PS/2 mouse device common for all mice [ 3.515651] rtc_cmos rtc_cmos: RTC can wake from S4 [ 3.516269] rtc_cmos rtc_cmos: registered as rtc0 [ 3.516389] rtc_cmos rtc_cmos: setting system clock to 2021-02-09T02:46:07 UTC (1612838767) [ 3.516406] rtc_cmos rtc_cmos: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 3.516411] intel_pstate: Intel P-state driver initializing [ 3.516666] intel_pstate: Disabling energy efficiency optimization [ 3.516667] intel_pstate: HWP enabled [ 3.516690] ledtrig-cpu: registered to indicate activity on CPUs [ 3.516693] EFI Variables Facility v0.08 2004-May-17 [ 3.537224] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 3.544831] intel_pmc_core INT33A1:00: initialized [ 3.545096] NET: Registered protocol family 10 [ 3.547870] Segment Routing with IPv6 [ 3.547871] RPL Segment Routing with IPv6 [ 3.547887] NET: Registered protocol family 17 [ 3.547917] Key type dns_resolver registered [ 3.548192] microcode: sig=0x906ea, pf=0x2, revision=0xd6 [ 3.548236] microcode: Microcode Update Driver: v2.2. [ 3.548239] IPI shorthand broadcast: enabled [ 3.548246] sched_clock: Marking stable (3544652881, 3578039)->(3565642114, -17411194) [ 3.548297] registered taskstats version 1 [ 3.548309] Loading compiled-in X.509 certificates [ 3.548342] zswap: loaded using pool lzo/zbud [ 3.548428] Key type ._fscrypt registered [ 3.548429] Key type .fscrypt registered [ 3.548429] Key type fscrypt-provisioning registered [ 3.554919] Freeing unused kernel image (initmem) memory: 1600K [ 3.567813] Write protecting the kernel read-only data: 22528k [ 3.568151] Freeing unused kernel image (text/rodata gap) memory: 2040K [ 3.568340] Freeing unused kernel image (rodata/data gap) memory: 1748K [ 3.569882] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 3.569883] x86/mm: Checking user space page tables [ 3.570027] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 3.570031] Run /init as init process [ 3.570032] with arguments: [ 3.570032] /init [ 3.570032] with environment: [ 3.570033] HOME=/ [ 3.570033] TERM=linux [ 3.570034] BOOT_IMAGE=/boot/vmlinuz-5.10.14_1 [ 3.630720] raid6: sse2x4 gen() 20336 MB/s [ 3.647718] raid6: sse2x4 xor() 12021 MB/s [ 3.664719] raid6: sse2x2 gen() 21021 MB/s [ 3.681719] raid6: sse2x2 xor() 12881 MB/s [ 3.698718] raid6: sse2x1 gen() 16977 MB/s [ 3.715718] raid6: sse2x1 xor() 9782 MB/s [ 3.715719] raid6: using algorithm sse2x2 gen() 21021 MB/s [ 3.715719] raid6: .... xor() 12881 MB/s, rmw enabled [ 3.715720] raid6: using ssse3x2 recovery algorithm [ 3.716145] xor: measuring software checksum speed [ 3.716575] prefetch64-sse : 22971 MB/sec [ 3.717040] generic_sse : 21610 MB/sec [ 3.717041] xor: using function: prefetch64-sse (22971 MB/sec) [ 3.748012] Btrfs loaded, crc32c=crc32c-intel [ 3.823077] device-mapper: uevent: version 1.0.3 [ 3.823165] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: XXX@XXX [ 3.831229] systemd-udevd[293]: starting version 3.2.9 [ 3.831371] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 3.831392] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 3.831400] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 3.832497] udevd[294]: starting eudev-3.2.9 [ 3.865373] dracut: rd.md=0: removing MD RAID activation [ 3.896539] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 [ 3.896578] ACPI: Sleep Button [SLPB] [ 3.896646] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2 [ 3.896693] ACPI: Power Button [PWRB] [ 3.896767] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 3.900745] ACPI: Power Button [PWRF] [ 3.908702] acpi PNP0C14:02: duplicate WMI GUID HASH_588-CAE0-9FF1-C20E-8ACAF41B3CAC (first instance was on PNP0C14:01) [ 3.908848] acpi PNP0C14:03: duplicate WMI GUID HASH_588-CAE0-9FF1-C20E-8ACAF41B3CAC (first instance was on PNP0C14:01) [ 3.909016] acpi PNP0C14:04: duplicate WMI GUID HASH_588-CAE0-9FF1-C20E-8ACAF41B3CAC (first instance was on PNP0C14:01) [ 3.921991] Linux agpgart interface v0.103 [ 3.926116] SCSI subsystem initialized [ 3.928121] ACPI: bus type USB registered [ 3.928172] usbcore: registered new interface driver usbfs [ 3.928197] usbcore: registered new interface driver hub [ 3.928219] usbcore: registered new device driver usb [ 3.937318] libata version 3.00 loaded. [ 3.939091] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 3.939101] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1 [ 3.939666] ahci 0000:00:17.0: version 3.0 [ 3.940241] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x110 quirks 0x0000000000009810 [ 3.940245] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 3.940524] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 3.940526] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 3.940527] usb usb1: Product: xHCI Host Controller [ 3.940528] usb usb1: Manufacturer: Linux 5.10.14_1 xhci-hcd [ 3.940529] usb usb1: SerialNumber: ... [ 3.940820] hub 1-0:1.0: USB hub found [ 3.940851] hub 1-0:1.0: 16 ports detected [ 3.945966] cryptd: max_cpu_qlen set to 1000 [ 3.948882] SSE version of gcm_enc/dec engaged. [ 3.950127] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 4 ports 6 Gbps 0xf impl SATA mode [ 3.950129] ahci 0000:00:17.0: flags: 64bit ncq sntf led clo only pio slum part ems deso sadm sds apst [ 3.952955] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 3.952959] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 3.952966] xhci_hcd 0000:00:14.0: Host supports USB 3.1 Enhanced SuperSpeed [ 3.953056] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 3.953057] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 3.953058] usb usb2: Product: xHCI Host Controller [ 3.953059] usb usb2: Manufacturer: Linux 5.10.14_1 xhci-hcd [ 3.953059] usb usb2: SerialNumber: ... [ 3.953904] hub 2-0:1.0: USB hub found [ 3.954020] hub 2-0:1.0: 10 ports detected [ 3.965862] scsi host0: ahci [ 3.969783] scsi host1: ahci [ 3.971855] scsi host2: ahci [ 3.974754] scsi host3: ahci [ 3.974878] ata1: SATA max UDMA/133 abar m2048@0xa3319000 port 0xa3319100 irq 127 [ 3.974880] ata2: SATA max UDMA/133 abar m2048@0xa3319000 port 0xa3319180 irq 127 [ 3.974882] ata3: SATA max UDMA/133 abar m2048@0xa3319000 port 0xa3319200 irq 127 [ 3.974884] ata4: SATA max UDMA/133 abar m2048@0xa3319000 port 0xa3319280 irq 127 [ 3.996403] MXM: GUID detected in BIOS [ 3.996649] checking generic (90000000 300000) vs hw (a2000000 1000000) [ 3.996650] checking generic (90000000 300000) vs hw (90000000 10000000) [ 3.996651] fb0: switching to nouveaufb from EFI VGA [ 3.996703] nouveau 0000:01:00.0: vgaarb: deactivate vga console [ 3.996792] nouveau 0000:01:00.0: NVIDIA GP108 (138000a1) [ 4.106647] nouveau 0000:01:00.0: bios: version XXX.XXX.XXX.XXX.2f [ 4.106886] nouveau 0000:01:00.0: pmu: firmware unavailable [ 4.107425] nouveau 0000:01:00.0: fb: 2048 MiB GDDR5 [ 4.121738] [TTM] Zone kernel: Available graphics memory: 24630204 KiB [ 4.121738] [TTM] Zone dma32: Available graphics memory: 2097152 KiB [ 4.121739] [TTM] Initializing pool allocator [ 4.121744] [TTM] Initializing DMA pool allocator [ 4.121762] nouveau 0000:01:00.0: DRM: VRAM: 2048 MiB [ 4.121763] nouveau 0000:01:00.0: DRM: GART: 536870912 MiB [ 4.121764] nouveau 0000:01:00.0: DRM: BIT table 'A' not found [ 4.121765] nouveau 0000:01:00.0: DRM: BIT table 'L' not found [ 4.121766] nouveau 0000:01:00.0: DRM: TMDS table version 2.0 [ 4.121767] nouveau 0000:01:00.0: DRM: DCB version 4.1 [ 4.121768] nouveau 0000:01:00.0: DRM: DCB outp 00: 01000342 04620010 [ 4.121769] nouveau 0000:01:00.0: DRM: DCB outp 01: 01011352 04620020 [ 4.121769] nouveau 0000:01:00.0: DRM: DCB conn 00: 00001031 [ 4.121770] nouveau 0000:01:00.0: DRM: DCB conn 01: 00002161 [ 4.122210] nouveau 0000:01:00.0: DRM: MM: using COPY for buffer copies [ 4.278775] usb 1-4: new full-speed USB device number 2 using xhci_hcd [ 4.282620] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 4.282806] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 4.282856] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 4.283227] ata1.00: ATA-11: KINGSTON SA400S37120G, SBFKB1D1, max UDMA/133 [ 4.283232] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 4.283547] ata1.00: configured for UDMA/133 [ 4.283825] scsi 0:0:0:0: Direct-Access ATA KINGSTON SA400S3 B1D1 PQ: 0 ANSI: 5 [ 4.283844] ata2.00: ATA-8: ST1000DM010-2EP102, CC43, max UDMA/133 [ 4.283848] ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 4.284956] ata2.00: configured for UDMA/133 [ 4.285194] scsi 1:0:0:0: Direct-Access ATA ST1000DM010-2EP1 CC43 PQ: 0 ANSI: 5 [ 4.290794] ata4: SATA link down (SStatus 4 SControl 300) [ 4.320207] ata3.00: ATA-10: ST2000DM008-2FR102, 0001, max UDMA/133 [ 4.320209] ata3.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 4.331726] nouveau 0000:01:00.0: DRM: allocated 1680x1050 fb: 0x200000, bo 00000000d799981a [ 4.333821] fbcon: nouveaudrmfb (fb0) is primary device [ 4.333821] fbcon: Deferring console take-over [ 4.333823] nouveau 0000:01:00.0: [drm] fb0: nouveaudrmfb frame buffer device [ 4.370023] [drm] Initialized nouveau 1.3.1 20120801 for 0000:01:00.0 on minor 0 [ 4.370025] nouveau 0000:01:00.0: DRM: Disabling PCI power management to avoid bug [ 4.379952] ata3.00: configured for UDMA/133 [ 4.380038] scsi 2:0:0:0: Direct-Access ATA ST2000DM008-2FR1 0001 PQ: 0 ANSI: 5 [ 4.383228] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB) [ 4.383236] sd 0:0:0:0: [sda] Write Protect is off [ 4.383237] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 4.383248] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.383299] sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 4.383301] sd 1:0:0:0: [sdb] 4096-byte physical blocks [ 4.383309] sd 1:0:0:0: [sdb] Write Protect is off [ 4.383310] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 4.383313] sd 2:0:0:0: [sdc] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB) [ 4.383315] sd 2:0:0:0: [sdc] 4096-byte physical blocks [ 4.383321] sd 2:0:0:0: [sdc] Write Protect is off [ 4.383322] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.383323] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 4.383335] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.392891] sda: sda1 sda2 [ 4.393265] sd 0:0:0:0: [sda] Attached SCSI disk [ 4.406067] usb 1-4: New USB device found, idVendor=056a, idProduct=0374, bcdDevice= 1.11 [ 4.406069] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 4.406069] usb 1-4: Product: Intuos S [ 4.406070] usb 1-4: Manufacturer: Wacom Co.,Ltd. [ 4.406071] usb 1-4: SerialNumber: ... [ 4.409074] hid: raw HID events driver (C) Jiri Kosina [ 4.412089] usbcore: registered new interface driver usbhid [ 4.412090] usbhid: USB HID core driver [ 4.413863] hid-generic 0003:056A:0374.0001: hiddev0,hidraw0: USB HID v1.10 Device [Wacom Co.,Ltd. Intuos S] on usb-0000:00:14.0-4/input0 [ 4.416966] input: Wacom Intuos S Pen as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:056A:0374.0001/input/input4 [ 4.417033] input: Wacom Intuos S Pad as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:056A:0374.0001/input/input6 [ 4.417072] wacom 0003:056A:0374.0001: hidraw0: USB HID v1.10 Device [Wacom Co.,Ltd. Intuos S] on usb-0000:00:14.0-4/input0 [ 4.421600] sdb: sdb1 sdb2 sdb3 sdb4 sdb5 [ 4.421992] sd 1:0:0:0: [sdb] Attached SCSI disk [ 4.444054] sdc: sdc1 sdc2 sdc3 sdc4 sdc5 [ 4.444607] sd 2:0:0:0: [sdc] Attached SCSI disk [ 4.520758] usb 1-5: new low-speed USB device number 3 using xhci_hcd [ 4.524763] tsc: Refined TSC clocksource calibration: 3696.034 MHz [ 4.524779] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x6a8d67d03b0, max_idle_ns: 881590907533 ns [ 4.524808] clocksource: Switched to clocksource tsc [ 4.564588] random: fast init done [ 4.652439] usb 1-5: New USB device found, idVendor=046d, idProduct=c062, bcdDevice=31.00 [ 4.652445] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 4.652448] usb 1-5: Product: USB Laser Mouse [ 4.652451] usb 1-5: Manufacturer: Logitech [ 4.659090] input: Logitech USB Laser Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/0003:046D:C062.0002/input/input7 [ 4.659451] hid-generic 0003:046D:C062.0002: input,hidraw1: USB HID v1.10 Mouse [Logitech USB Laser Mouse] on usb-0000:00:14.0-5/input0 [ 4.663888] usbcore: registered new interface driver usbmouse [ 4.774770] usb 1-6: new high-speed USB device number 4 using xhci_hcd [ 4.843079] random: crng init done [ 4.843083] random: 7 urandom warning(s) missed due to ratelimiting [ 4.902347] usb 1-6: New USB device found, idVendor=1a40, idProduct=0101, bcdDevice= 1.11 [ 4.902353] usb 1-6: New USB device strings: Mfr=0, Product=1, SerialNumber=... [ 4.902356] usb 1-6: Product: USB 2.0 Hub [ 4.903835] hub 1-6:1.0: USB hub found [ 4.903922] hub 1-6:1.0: 4 ports detected [ 4.986596] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) [ 5.089273] dracut: Checking ext4: /dev/disk/by-uuid/HASH_049-484A-4098-DA5A-33C114431DA0 [ 5.089669] dracut: issuing e2fsck -a /dev/disk/by-uuid/HASH_049-484A-4098-DA5A-33C114431DA0 [ 5.137767] dracut: /dev/disk/by-uuid/HASH_049-484A-4098-DA5A-33C114431DA0: clean, 385938/7299072 files, 7432657/29176945 blocks [ 5.144107] dracut: Mounting /dev/disk/by-uuid/HASH_049-484A-4098-DA5A-33C114431DA0 with -o defaults,ro [ 5.190249] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) [ 5.284739] usb 1-6.1: new high-speed USB device number 5 using xhci_hcd [ 5.296357] dracut: Mounted root filesystem /dev/sda2 [ 5.448917] dracut: Switching root [ 5.480920] fbcon: Taking over console [ 5.481482] Console: switching to colour frame buffer device 210x65 [ 5.499356] usb 1-6.1: New USB device found, idVendor=0cf3, idProduct=9271, bcdDevice= 1.08 [ 5.499359] usb 1-6.1: New USB device strings: Mfr=16, Product=32, SerialNumber=... [ 5.499360] usb 1-6.1: Product: USB2.0 WLAN [ 5.499361] usb 1-6.1: Manufacturer: ATHEROS [ 5.499362] usb 1-6.1: SerialNumber: ... [ 5.732319] fuse: init (API version 7.32) [ 5.750914] Non-volatile memory driver v1.3 [ 5.825845] loop: module loaded [ 5.837748] tun: Universal TUN/TAP device driver, 1.6 [ 5.848602] PPP generic driver version 2.4.2 [ 5.877200] VFIO - User Level meta-driver version: 0.3 [ 5.905275] Bluetooth: Core ver 2.22 [ 5.905293] NET: Registered protocol family 31 [ 5.905293] Bluetooth: HCI device and connection manager initialized [ 5.905296] Bluetooth: HCI socket layer initialized [ 5.905298] Bluetooth: L2CAP socket layer initialized [ 5.905300] Bluetooth: SCO socket layer initialized [ 5.916290] NET: Registered protocol family 40 [ 5.958939] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 5.959181] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 5.959414] sd 2:0:0:0: Attached scsi generic sg2 type 0 [ 5.969762] vboxdrv: loading out-of-tree module taints kernel. [ 5.978336] vboxdrv: Found 4 processor cores [ 5.994122] vboxdrv: TSC mode is Invariant, tentative frequency 3696035787 Hz [ 5.994123] vboxdrv: Successfully loaded version 6.1.18 (interface 0x00300000) [ 5.995237] VBoxNetAdp: Successfully started. [ 5.996284] VBoxNetFlt: Successfully started. [ 6.003497] udevd[641]: starting version 3.2.9 [ 6.071353] udevd[642]: starting eudev-3.2.9 [ 6.405291] thermal LNXTHERM:00: registered as thermal_zone0 [ 6.405292] ACPI: Thermal Zone [TZ00] (28 C) [ 6.419030] mei_me 0000:00:16.0: enabling device (0000 -> 0002) [ 6.500555] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 6.502383] i801_smbus 0000:00:1f.4: SPD Write Disable is set [ 6.502442] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt [ 6.502493] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 6.504096] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 6.504099] cfg80211: failed to load regulatory.db [ 6.507678] i2c i2c-6: 4/4 memory slots populated (from DMI) [ 6.508087] i2c i2c-6: Successfully instantiated SPD at 0x50 [ 6.508481] i2c i2c-6: Successfully instantiated SPD at 0x51 [ 6.508881] i2c i2c-6: Successfully instantiated SPD at 0x52 [ 6.509276] i2c i2c-6: Successfully instantiated SPD at 0x53 [ 6.513899] r8169 0000:04:00.0: can't disable ASPM; OS doesn't have ASPM control [ 6.521487] input: PC Speaker as /devices/platform/pcspkr/input/input8 [ 6.522105] asus_wmi: ASUS WMI generic driver loaded [ 6.523877] asus_wmi: Initialization: 0x0 [ 6.523998] asus_wmi: BIOS WMI version: 0.9 [ 6.524653] asus_wmi: SFUN value: 0x0 [ 6.524656] eeepc-wmi eeepc-wmi: Detected ASUSWMI, use DCTS [ 6.525657] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002) [ 6.527645] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input9 [ 6.528932] libphy: r8169: probed [ 6.529170] r8169 0000:04:00.0 eth0: RTL8168h/8111h, XXX, XID 541, IRQ 131 [ 6.529172] r8169 0000:04:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko] [ 6.530702] snd_hda_intel 0000:01:00.1: enabling device (0000 -> 0002) [ 6.530842] snd_hda_intel 0000:01:00.1: Disabling MSI [ 6.530848] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client [ 6.538328] snd_oxygen 0000:06:04.0: enabling device (0000 -> 0001) [ 6.545309] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 655360 ms ovfl timer [ 6.545311] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules [ 6.545312] RAPL PMU: hw unit of domain package 2^-14 Joules [ 6.545312] RAPL PMU: hw unit of domain dram 2^-14 Joules [ 6.555235] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC887-VD: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line [ 6.555237] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 6.555239] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 6.555240] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 [ 6.555241] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x11/0x0 [ 6.555241] snd_hda_codec_realtek hdaudioC0D0: inputs: [ 6.555243] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19 [ 6.555244] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18 [ 6.555245] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a [ 6.557648] snd_hda_intel 0000:01:00.1: bound 0000:01:00.0 (ops nouveau_drm_exit [nouveau]) [ 6.560599] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input10 [ 6.560693] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input11 [ 6.560778] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input12 [ 6.560875] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input13 [ 6.560966] input: HDA NVidia HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input14 [ 6.574833] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input15 [ 6.574930] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input16 [ 6.575041] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1f.3/sound/card0/input17 [ 6.575206] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1f.3/sound/card0/input18 [ 6.575445] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input19 [ 6.586635] usb 1-6.1: ath9k_htc: Firmware ath9k_htc/htc_9271-1.4.0.fw requested [ 6.587279] usbcore: registered new interface driver ath9k_htc [ 6.626069] iTCO_vendor_support: vendor-support=0 [ 6.626114] ee1004 6-0050: 512 byte EE1004-compliant SPD EEPROM, read-only [ 6.626513] r8169 0000:04:00.0 enp4s0: renamed from eth0 [ 6.626515] ee1004 6-0051: 512 byte EE1004-compliant SPD EEPROM, read-only [ 6.626915] ee1004 6-0052: 512 byte EE1004-compliant SPD EEPROM, read-only [ 6.627315] ee1004 6-0053: 512 byte EE1004-compliant SPD EEPROM, read-only [ 6.639079] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 [ 6.639124] iTCO_wdt: Found a Intel PCH TCO device (Version=6, TCOBASE=0x0400) [ 6.639812] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 6.654074] intel_rapl_common: Found RAPL domain package [ 6.654076] intel_rapl_common: Found RAPL domain core [ 6.654077] intel_rapl_common: Found RAPL domain dram [ 6.870863] usb 1-6.1: ath9k_htc: Transferred FW: ath9k_htc/htc_9271-1.4.0.fw, size: 51008 [ 7.122643] ath9k_htc 1-6.1:1.0: ath9k_htc: HTC initialized with 33 credits [ 7.386222] ath9k_htc 1-6.1:1.0: ath9k_htc: FW Version: 1.4 [ 7.386223] ath9k_htc 1-6.1:1.0: FW RMW support: On [ 7.386224] ath: EEPROM regdomain: 0x809c [ 7.386224] ath: EEPROM indicates we should expect a country code [ 7.386224] ath: doing EEPROM country->regdmn map search [ 7.386225] ath: country maps to regdmn code: 0x52 [ 7.386225] ath: Country alpha2 being used: CN [ 7.386226] ath: Regpair used: 0x52 [ 7.390518] ieee80211 phy0: Atheros AR9271 Rev:1 [ 7.391840] ath9k_htc 1-6.1:1.0 wlp0s20f0u6u1: renamed from wlan0 [ 9.136337] EXT4-fs (sda2): re-mounted. Opts: (null) [ 9.766823] EXT4-fs (sda2): re-mounted. Opts: (null) [ 9.923175] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null) [ 9.937818] Adding 68157436k swap on /dev/sdc4. Priority:-2 extents:1 across:68157436k FS [ 10.038101] udevd[856]: starting version 3.2.9 [ 10.044252] udevd[856]: starting eudev-3.2.9 [ 10.690783] Generic FE-GE Realtek PHY r8169-400:00: attached PHY driver [Generic FE-GE Realtek PHY] (mii_bus:phy_addr=r8169-400:00, irq=IGNORE) [ 10.691195] nouveau 0000:01:00.0: gr: intr 00000040 [ 10.854962] r8169 0000:04:00.0 enp4s0: Link is Down [ 246.615899] wlp0s20f0u6u1: authenticate with XXX [ 246.874614] wlp0s20f0u6u1: send auth to XXX (try 1/3) [ 246.876206] wlp0s20f0u6u1: authenticated [ 246.876763] wlp0s20f0u6u1: associate with XXX (try 1/3) [ 246.886299] wlp0s20f0u6u1: RX AssocResp from XXX (capab=0x411 status=0 aid=3) [ 246.896192] wlp0s20f0u6u1: associated [ 246.932442] IPv6: ADDRCONF(NETDEV_CHANGE): wlp0s20f0u6u1: link becomes ready [50094.860895] usb 1-9: new high-speed USB device number 6 using xhci_hcd [50094.992529] usb 1-9: New USB device found, idVendor=13fe, idProduct=3623, bcdDevice= 1.00 [50094.992536] usb 1-9: New USB device strings: Mfr=1, Product=2, SerialNumber=... [50094.992539] usb 1-9: Product: STORE N GO [50094.992542] usb 1-9: Manufacturer: Verbatim [50094.992545] usb 1-9: SerialNumber: ... [50095.038820] usb-storage 1-9:1.0: USB Mass Storage device detected [50095.039231] scsi host4: usb-storage 1-9:1.0 [50095.039704] usbcore: registered new interface driver usb-storage [50095.044424] usbcore: registered new interface driver uas [50096.079440] scsi 4:0:0:0: Direct-Access Verbatim STORE N GO 5.00 PQ: 0 ANSI: 0 CCS [50096.080362] sd 4:0:0:0: Attached scsi generic sg3 type 0 [50096.885029] sd 4:0:0:0: [sdd] 7827456 512-byte logical blocks: (4.01 GB/3.73 GiB) [50096.885240] sd 4:0:0:0: [sdd] Write Protect is off [50096.885247] sd 4:0:0:0: [sdd] Mode Sense: 23 00 00 00 [50096.885410] sd 4:0:0:0: [sdd] No Caching mode page found [50096.885418] sd 4:0:0:0: [sdd] Assuming drive cache: write through [50096.918320] sdd: sdd1 sdd2 [50096.920933] sd 4:0:0:0: [sdd] Attached SCSI removable disk [50562.580337] sdd: sdd1 sdd2 [50581.333347] usb 1-9: USB disconnect, device number 6 [59207.088778] usb 2-9: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd [59207.116052] usb 2-9: New USB device found, idVendor=0951, idProduct=1666, bcdDevice= 0.01 [59207.116054] usb 2-9: New USB device strings: Mfr=1, Product=2, SerialNumber=... [59207.116056] usb 2-9: Product: DataTraveler 3.0 [59207.116057] usb 2-9: Manufacturer: Kingston [59207.116058] usb 2-9: SerialNumber: ... [59207.190174] usb-storage 2-9:1.0: USB Mass Storage device detected [59207.190311] scsi host4: usb-storage 2-9:1.0 [59208.240946] scsi 4:0:0:0: Direct-Access Kingston DataTraveler 3.0 PQ: 0 ANSI: 6 [59208.241206] sd 4:0:0:0: Attached scsi generic sg3 type 0 [59208.241353] sd 4:0:0:0: [sdd] 120845300 512-byte logical blocks: (61.9 GB/57.6 GiB) [59208.241493] sd 4:0:0:0: [sdd] Write Protect is off [59208.241494] sd 4:0:0:0: [sdd] Mode Sense: 4f 00 00 00 [59208.241627] sd 4:0:0:0: [sdd] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [59208.251313] sdd: sdd1 [59208.252737] sd 4:0:0:0: [sdd] Attached SCSI removable disk [60540.109499] perf: interrupt took too long (2514 > 2500), lowering kernel.perf_event_max_sample_rate to 79000 [60759.355556] usb 1-10: new high-speed USB device number 7 using xhci_hcd [60759.486760] usb 1-10: New USB device found, idVendor=0951, idProduct=1643, bcdDevice= 1.00 [60759.486766] usb 1-10: New USB device strings: Mfr=1, Product=2, SerialNumber=... [60759.486769] usb 1-10: Product: DataTraveler G3 [60759.486772] usb 1-10: Manufacturer: Kingston [60759.486775] usb 1-10: SerialNumber: ... [60759.488538] usb-storage 1-10:1.0: USB Mass Storage device detected [60759.488928] scsi host5: usb-storage 1-10:1.0 [60760.522795] scsi 5:0:0:0: Direct-Access Kingston DataTraveler G3 PMAP PQ: 0 ANSI: 0 CCS [60760.523761] sd 5:0:0:0: Attached scsi generic sg4 type 0 [60762.741999] sd 5:0:0:0: [sde] 31293440 512-byte logical blocks: (16.0 GB/14.9 GiB) [60762.743087] sd 5:0:0:0: [sde] Write Protect is off [60762.743097] sd 5:0:0:0: [sde] Mode Sense: 23 00 00 00 [60762.744056] sd 5:0:0:0: [sde] No Caching mode page found [60762.744067] sd 5:0:0:0: [sde] Assuming drive cache: write through [60762.774663] sde: sde1 [60762.778355] sd 5:0:0:0: [sde] Attached SCSI removable disk [60889.984034] sdd: sdd1 [60913.198623] sdd: sdd1 [60913.200581] sdd: sdd1 [62250.478747] EXT4-fs (sdd1): mounting ext2 file system using the ext4 subsystem [62250.490542] EXT4-fs (sdd1): mounted filesystem without journal. Opts: (null) [62734.657006] usb 1-10: USB disconnect, device number 7 [62956.985637] usb 1-10: new high-speed USB device number 9 using xhci_hcd [62957.118588] usb 1-10: New USB device found, idVendor=0951, idProduct=1643, bcdDevice= 1.00 [62957.118597] usb 1-10: New USB device strings: Mfr=1, Product=2, SerialNumber=... [62957.118603] usb 1-10: Product: DataTraveler G3 [62957.118607] usb 1-10: Manufacturer: Kingston [62957.118610] usb 1-10: SerialNumber: ... [62957.121417] usb-storage 1-10:1.0: USB Mass Storage device detected [62957.122666] scsi host5: usb-storage 1-10:1.0 [62958.155480] scsi 5:0:0:0: Direct-Access Kingston DataTraveler G3 PMAP PQ: 0 ANSI: 0 CCS [62958.156739] sd 5:0:0:0: Attached scsi generic sg4 type 0 [62959.691961] sd 5:0:0:0: [sde] 31293440 512-byte logical blocks: (16.0 GB/14.9 GiB) [62959.692843] sd 5:0:0:0: [sde] Write Protect is off [62959.692851] sd 5:0:0:0: [sde] Mode Sense: 23 00 00 00 [62959.693771] sd 5:0:0:0: [sde] No Caching mode page found [62959.693780] sd 5:0:0:0: [sde] Assuming drive cache: write through [62959.724094] sde: sde1 [62959.732225] sd 5:0:0:0: [sde] Attached SCSI removable disk [62999.715657] EXT4-fs (sde1): mounting ext2 file system using the ext4 subsystem [62999.723098] EXT4-fs (sde1): warning: mounting unchecked fs, running e2fsck is recommended [63000.265833] EXT4-fs (sde1): mounted filesystem without journal. Opts: (null) [68058.940552] usb 1-10: USB disconnect, device number 9 [68082.333970] usb 1-10: new high-speed USB device number 10 using xhci_hcd [68082.463135] usb 1-10: New USB device found, idVendor=1609, idProduct=3a04, bcdDevice= 0.00 [68082.463138] usb 1-10: New USB device strings: Mfr=1, Product=2, SerialNumber=... [68082.463140] usb 1-10: Product: USB Disk [68082.463141] usb 1-10: Manufacturer: Flash [68082.463142] usb 1-10: SerialNumber: ... [68082.464495] usb-storage 1-10:1.0: USB Mass Storage device detected [68082.464748] scsi host5: usb-storage 1-10:1.0 [68083.505352] scsi 5:0:0:0: Direct-Access Flash USB Disk 6.80 PQ: 0 ANSI: 2 [68083.505597] sd 5:0:0:0: Attached scsi generic sg4 type 0 [68083.506223] sd 5:0:0:0: [sde] 15728640 512-byte logical blocks: (8.05 GB/7.50 GiB) [68083.506347] sd 5:0:0:0: [sde] Write Protect is off [68083.506349] sd 5:0:0:0: [sde] Mode Sense: 0b 00 00 08 [68083.506472] sd 5:0:0:0: [sde] No Caching mode page found [68083.506476] sd 5:0:0:0: [sde] Assuming drive cache: write through [68083.515680] sde: sde1 [68083.517389] sd 5:0:0:0: [sde] Attached SCSI removable disk [68262.190976] usb 1-11: new high-speed USB device number 11 using xhci_hcd [68262.319155] usb 1-11: New USB device found, idVendor=1609, idProduct=3a04, bcdDevice= 0.00 [68262.319158] usb 1-11: New USB device strings: Mfr=1, Product=2, SerialNumber=... [68262.319160] usb 1-11: Product: USB Disk [68262.319161] usb 1-11: Manufacturer: Flash [68262.319162] usb 1-11: SerialNumber: ... [68262.320438] usb-storage 1-11:1.0: USB Mass Storage device detected [68262.320594] scsi host6: usb-storage 1-11:1.0 [68263.348756] scsi 6:0:0:0: Direct-Access Flash USB Disk 6.80 PQ: 0 ANSI: 2 [68263.350039] sd 6:0:0:0: Attached scsi generic sg5 type 0 [68263.350584] sd 6:0:0:0: [sdf] 15728640 512-byte logical blocks: (8.05 GB/7.50 GiB) [68263.350832] sd 6:0:0:0: [sdf] Write Protect is off [68263.350840] sd 6:0:0:0: [sdf] Mode Sense: 0b 00 00 08 [68263.351072] sd 6:0:0:0: [sdf] No Caching mode page found [68263.351084] sd 6:0:0:0: [sdf] Assuming drive cache: write through [68263.357689] sdf: sdf1 [68263.359135] sd 6:0:0:0: [sdf] Attached SCSI removable disk [68387.739848] sdf: sdf1 [68441.710173] usb 1-11: reset high-speed USB device number 11 using xhci_hcd [68441.824008] usb 1-11: device descriptor read/64, error 18 [68442.045023] usb 1-11: device descriptor read/64, error 18 [68442.267979] usb 1-11: reset high-speed USB device number 11 using xhci_hcd [68442.382995] usb 1-11: device descriptor read/64, error 18 [68442.603037] usb 1-11: device descriptor read/64, error 18 [68442.818981] usb 1-11: reset high-speed USB device number 11 using xhci_hcd [68442.831906] usb 1-11: device descriptor read/8, error -61 [68442.950571] usb 1-11: device descriptor read/8, error -61 [68443.172136] usb 1-11: reset high-speed USB device number 11 using xhci_hcd [68443.184580] usb 1-11: device descriptor read/8, error -61 [68443.302568] usb 1-11: device descriptor read/8, error -61 [68443.409034] usb 1-11: USB disconnect, device number 11 [68443.417010] blk_update_request: I/O error, dev sdf, sector 2048 op 0x1:(WRITE) flags 0x800 phys_seg 1 prio class 0 [68443.417015] Buffer I/O error on dev sdf, logical block 256, lost async page write [68443.417083] blk_update_request: I/O error, dev sdf, sector 2048 op 0x1:(WRITE) flags 0x800 phys_seg 1 prio class 0 [68443.417086] Buffer I/O error on dev sdf, logical block 256, lost async page write [68443.417112] blk_update_request: I/O error, dev sdf, sector 2048 op 0x1:(WRITE) flags 0x800 phys_seg 1 prio class 0 [68443.417115] Buffer I/O error on dev sdf, logical block 256, lost async page write [68443.417144] blk_update_request: I/O error, dev sdf, sector 2072 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0 [68443.417154] blk_update_request: I/O error, dev sdf, sector 2072 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 [68443.417156] Buffer I/O error on dev sdf, logical block 259, async page read [68443.417176] blk_update_request: I/O error, dev sdf, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 [68443.420592] udevd[5416]: inotify_add_watch(7, /dev/sdf, 10) failed: No such file or directory [68443.543983] usb 1-11: new high-speed USB device number 12 using xhci_hcd [68443.659973] usb 1-11: device descriptor read/64, error 18 [68443.884045] usb 1-11: device descriptor read/64, error 18 [68444.110005] usb 1-11: new high-speed USB device number 13 using xhci_hcd [68444.225983] usb 1-11: device descriptor read/64, error 18 [68444.450670] usb 1-11: device descriptor read/64, error 18 [68444.554108] usb usb1-port11: attempt power cycle [68445.181979] usb 1-11: new high-speed USB device number 14 using xhci_hcd [68445.194572] usb 1-11: device descriptor read/8, error -61 [68445.309547] usb 1-11: device descriptor read/8, error -61 [68445.532007] usb 1-11: new high-speed USB device number 15 using xhci_hcd [68445.544620] usb 1-11: device descriptor read/8, error -61 [68445.661522] usb 1-11: device descriptor read/8, error -61 [68445.769016] usb usb1-port11: unable to enumerate USB device [68478.073990] usb 1-11: new high-speed USB device number 16 using xhci_hcd [68478.202345] usb 1-11: New USB device found, idVendor=1609, idProduct=3a04, bcdDevice= 0.00 [68478.202351] usb 1-11: New USB device strings: Mfr=1, Product=2, SerialNumber=... [68478.202355] usb 1-11: Product: USB Disk [68478.202358] usb 1-11: Manufacturer: Flash [68478.202361] usb 1-11: SerialNumber: ... [68478.204322] usb-storage 1-11:1.0: USB Mass Storage device detected [68478.204770] scsi host6: usb-storage 1-11:1.0 [68479.217573] scsi 6:0:0:0: Direct-Access Flash USB Disk 6.80 PQ: 0 ANSI: 2 [68479.218795] sd 6:0:0:0: Attached scsi generic sg5 type 0 [68479.219566] sd 6:0:0:0: [sdf] 15728640 512-byte logical blocks: (8.05 GB/7.50 GiB) [68479.220896] sd 6:0:0:0: [sdf] Write Protect is off [68479.220905] sd 6:0:0:0: [sdf] Mode Sense: 0b 00 00 08 [68479.222144] sd 6:0:0:0: [sdf] No Caching mode page found [68479.222157] sd 6:0:0:0: [sdf] Assuming drive cache: write through [68479.231643] sdf: sdf1 [68479.234181] sd 6:0:0:0: [sdf] Attached SCSI removable disk [68647.534134] usb 1-11: reset high-speed USB device number 16 using xhci_hcd [68647.648990] usb 1-11: device descriptor read/64, error 18 [68647.866997] usb 1-11: device descriptor read/64, error 18 [68648.083026] usb 1-11: reset high-speed USB device number 16 using xhci_hcd [68648.197989] usb 1-11: device descriptor read/64, error 18 [68648.420001] usb 1-11: device descriptor read/64, error 18 [68648.642991] usb 1-11: reset high-speed USB device number 16 using xhci_hcd [68648.656578] usb 1-11: device descriptor read/8, error -61 [68648.774550] usb 1-11: device descriptor read/8, error -61 [68648.995132] usb 1-11: reset high-speed USB device number 16 using xhci_hcd [68649.007550] usb 1-11: device descriptor read/8, error -61 [68649.125548] usb 1-11: device descriptor read/8, error -61 [68649.233041] usb 1-11: USB disconnect, device number 16 [68649.242981] blk_update_request: I/O error, dev sdf, sector 2048 op 0x1:(WRITE) flags 0x4800 phys_seg 30 prio class 0 [68649.242984] Buffer I/O error on dev sdf1, logical block 0, lost async page write [68649.242988] Buffer I/O error on dev sdf1, logical block 1, lost async page write [68649.242989] Buffer I/O error on dev sdf1, logical block 2, lost async page write [68649.242990] Buffer I/O error on dev sdf1, logical block 3, lost async page write [68649.242992] Buffer I/O error on dev sdf1, logical block 4, lost async page write [68649.242993] Buffer I/O error on dev sdf1, logical block 5, lost async page write [68649.242994] Buffer I/O error on dev sdf1, logical block 6, lost async page write [68649.242995] Buffer I/O error on dev sdf1, logical block 7, lost async page write [68649.242996] Buffer I/O error on dev sdf1, logical block 8, lost async page write [68649.242998] Buffer I/O error on dev sdf1, logical block 9, lost async page write [68649.243014] blk_update_request: I/O error, dev sdf, sector 2288 op 0x1:(WRITE) flags 0x4800 phys_seg 30 prio class 0 [68649.243036] blk_update_request: I/O error, dev sdf, sector 2528 op 0x1:(WRITE) flags 0x800 phys_seg 1 prio class 0 [68649.243086] blk_update_request: I/O error, dev sdf, sector 2536 op 0x1:(WRITE) flags 0x104000 phys_seg 30 prio class 0 [68649.243186] blk_update_request: I/O error, dev sdf, sector 2776 op 0x1:(WRITE) flags 0x100000 phys_seg 27 prio class 0 [68649.243218] blk_update_request: I/O error, dev sdf, sector 2992 op 0x1:(WRITE) flags 0x800 phys_seg 16 prio class 0 [68649.243239] blk_update_request: I/O error, dev sdf, sector 3120 op 0x1:(WRITE) flags 0x100000 phys_seg 5 prio class 0 [68649.243252] blk_update_request: I/O error, dev sdf, sector 3160 op 0x1:(WRITE) flags 0x800 phys_seg 11 prio class 0 [68649.243265] blk_update_request: I/O error, dev sdf, sector 3248 op 0x1:(WRITE) flags 0x100000 phys_seg 3 prio class 0 [68649.243290] blk_update_request: I/O error, dev sdf, sector 3272 op 0x1:(WRITE) flags 0x800 phys_seg 13 prio class 0 [68649.251453] udevd[5620]: inotify_add_watch(7, /dev/sdf1, 10) failed: No such file or directory [68649.253119] udevd[5620]: inotify_add_watch(7, /dev/sdf, 10) failed: No such file or directory [68649.384007] usb 1-11: new high-speed USB device number 17 using xhci_hcd [68649.498092] usb 1-11: device descriptor read/64, error 18 [68649.714991] usb 1-11: device descriptor read/64, error 18 [68649.931069] usb 1-11: new high-speed USB device number 18 using xhci_hcd [68650.047019] usb 1-11: device descriptor read/64, error 18 [68650.267063] usb 1-11: device descriptor read/64, error 18 [68650.369015] usb usb1-port11: attempt power cycle [68650.997019] usb 1-11: new high-speed USB device number 19 using xhci_hcd [68651.009646] usb 1-11: device descriptor read/8, error -61 [68651.126574] usb 1-11: device descriptor read/8, error -61 [68651.348002] usb 1-11: new high-speed USB device number 20 using xhci_hcd [68651.361654] usb 1-11: device descriptor read/8, error -61 [68651.477770] usb 1-11: device descriptor read/8, error -61 [68651.585127] usb usb1-port11: unable to enumerate USB device [68666.712002] usb 1-11: new high-speed USB device number 21 using xhci_hcd [68666.839334] usb 1-11: New USB device found, idVendor=1609, idProduct=3a04, bcdDevice= 0.00 [68666.839341] usb 1-11: New USB device strings: Mfr=1, Product=2, SerialNumber=... [68666.839345] usb 1-11: Product: USB Disk [68666.839347] usb 1-11: Manufacturer: Flash [68666.839350] usb 1-11: SerialNumber: ... [68666.842269] usb-storage 1-11:1.0: USB Mass Storage device detected [68666.842681] scsi host6: usb-storage 1-11:1.0 [68667.889644] scsi 6:0:0:0: Direct-Access Flash USB Disk 6.80 PQ: 0 ANSI: 2 [68667.890541] sd 6:0:0:0: Attached scsi generic sg5 type 0 [68667.890703] sd 6:0:0:0: [sdf] 15728640 512-byte logical blocks: (8.05 GB/7.50 GiB) [68667.890849] sd 6:0:0:0: [sdf] Write Protect is off [68667.890856] sd 6:0:0:0: [sdf] Mode Sense: 0b 00 00 08 [68667.891066] sd 6:0:0:0: [sdf] No Caching mode page found [68667.891083] sd 6:0:0:0: [sdf] Assuming drive cache: write through [68667.899582] sdf: sdf1 [68667.901362] sd 6:0:0:0: [sdf] Attached SCSI removable disk [68696.336524] FAT-fs (sdf1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [68772.462195] usb 1-11: reset high-speed USB device number 21 using xhci_hcd [68772.807040] usb 1-11: device descriptor read/64, error 18 [68773.260069] usb 1-11: device descriptor read/64, error 18 [68773.483013] usb 1-11: reset high-speed USB device number 21 using xhci_hcd [68773.829022] usb 1-11: device descriptor read/64, error 18 [68774.282054] usb 1-11: device descriptor read/64, error 18 [68774.500039] usb 1-11: reset high-speed USB device number 21 using xhci_hcd [68774.743725] usb 1-11: device descriptor read/8, error -61 [68775.093622] usb 1-11: device descriptor read/8, error -61 [68775.315227] usb 1-11: reset high-speed USB device number 21 using xhci_hcd [68775.558787] usb 1-11: device descriptor read/8, error -61 [68775.909638] usb 1-11: device descriptor read/8, error -61 [68776.017147] usb 1-11: USB disconnect, device number 21 [68776.025089] print_req_error: 248 callbacks suppressed [68776.025096] blk_update_request: I/O error, dev sdf, sector 128136 op 0x1:(WRITE) flags 0x800 phys_seg 1 prio class 0 [68776.025181] blk_update_request: I/O error, dev sdf, sector 2049 op 0x1:(WRITE) flags 0x100000 phys_seg 1 prio class 0 [68776.025188] buffer_io_error: 3829 callbacks suppressed [68776.025191] Buffer I/O error on dev sdf1, logical block 1, lost async page write [68776.025249] blk_update_request: I/O error, dev sdf, sector 32752 op 0x1:(WRITE) flags 0x800 phys_seg 1 prio class 0 [68776.025257] Buffer I/O error on dev sdf1, logical block 30704, lost sync page write [68776.025271] blk_update_request: I/O error, dev sdf, sector 2173 op 0x1:(WRITE) flags 0x100000 phys_seg 1 prio class 0 [68776.025275] Buffer I/O error on dev sdf1, logical block 125, lost async page write [68776.025317] blk_update_request: I/O error, dev sdf, sector 17509 op 0x1:(WRITE) flags 0x100000 phys_seg 1 prio class 0 [68776.025326] Buffer I/O error on dev sdf1, logical block 15461, lost async page write [68776.025422] blk_update_request: I/O error, dev sdf, sector 32752 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0 [68776.025586] blk_update_request: I/O error, dev sdf, sector 32752 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 [68776.025603] FAT-fs (sdf1): Directory bread(block 30704) failed [68776.025643] blk_update_request: I/O error, dev sdf, sector 32752 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0 [68776.025697] blk_update_request: I/O error, dev sdf, sector 32752 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 [68776.025720] FAT-fs (sdf1): Directory bread(block 30704) failed [68776.025763] blk_update_request: I/O error, dev sdf, sector 32752 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0 [68776.025919] FAT-fs (sdf1): Directory bread(block 30704) failed [68776.027442] FAT-fs (sdf1): FAT read failed (blocknr 125) [68776.027683] FAT-fs (sdf1): Directory bread(block 30704) failed [68776.027748] FAT-fs (sdf1): Directory bread(block 30704) failed [68776.027793] FAT-fs (sdf1): Directory bread(block 30704) failed [68776.027859] FAT-fs (sdf1): FAT read failed (blocknr 125) [68776.028351] FAT-fs (sdf1): Directory bread(block 30704) failed [68776.028434] FAT-fs (sdf1): Directory bread(block 30704) failed [68776.028482] FAT-fs (sdf1): Directory bread(block 30704) failed [68776.028558] FAT-fs (sdf1): FAT read failed (blocknr 125) [68776.028837] FAT-fs (sdf1): Directory bread(block 30704) failed [68776.029379] FAT-fs (sdf1): FAT read failed (blocknr 125) [68776.029745] FAT-fs (sdf1): FAT read failed (blocknr 125) [68776.030298] FAT-fs (sdf1): FAT read failed (blocknr 125) [68776.030633] FAT-fs (sdf1): FAT read failed (blocknr 125) [68776.051524] udevd[5809]: inotify_add_watch(7, /dev/sdf, 10) failed: No such file or directory [68776.163026] usb 1-11: new high-speed USB device number 22 using xhci_hcd [68776.510057] usb 1-11: device descriptor read/64, error 18 [68776.962038] usb 1-11: device descriptor read/64, error 18 [68777.179024] usb 1-11: new high-speed USB device number 23 using xhci_hcd [68777.524051] usb 1-11: device descriptor read/64, error 18 [68777.979048] usb 1-11: device descriptor read/64, error 18 [68778.081138] usb usb1-port11: attempt power cycle [68778.717018] usb 1-11: new high-speed USB device number 24 using xhci_hcd [68778.961687] usb 1-11: device descriptor read/8, error -61 [68779.308683] usb 1-11: device descriptor read/8, error -61 [68779.531023] usb 1-11: new high-speed USB device number 25 using xhci_hcd [68779.777032] usb 1-11: device descriptor read/8, error -61 [68780.124738] usb 1-11: device descriptor read/8, error -61 [68780.233122] usb usb1-port11: unable to enumerate USB device [70398.214494] usb 1-10: USB disconnect, device number 10 [70425.543162] usb 1-10: new high-speed USB device number 26 using xhci_hcd [70425.671634] usb 1-10: New USB device found, idVendor=1609, idProduct=3a04, bcdDevice= 0.00 [70425.671635] usb 1-10: New USB device strings: Mfr=1, Product=2, SerialNumber=... [70425.671636] usb 1-10: Product: USB Disk [70425.671637] usb 1-10: Manufacturer: Flash [70425.671638] usb 1-10: SerialNumber: ... [70425.672584] usb-storage 1-10:1.0: USB Mass Storage device detected [70425.672704] scsi host5: usb-storage 1-10:1.0 [70426.673779] scsi 5:0:0:0: Direct-Access Flash USB Disk 6.80 PQ: 0 ANSI: 2 [70426.674861] sd 5:0:0:0: [sde] 15728640 512-byte logical blocks: (8.05 GB/7.50 GiB) [70426.675036] sd 5:0:0:0: [sde] Write Protect is off [70426.675042] sd 5:0:0:0: [sde] Mode Sense: 0b 00 00 08 [70426.678379] sd 5:0:0:0: [sde] No Caching mode page found [70426.678389] sd 5:0:0:0: [sde] Assuming drive cache: write through [70426.678790] sd 5:0:0:0: Attached scsi generic sg4 type 0 [70426.685479] sde: sde1 [70426.688724] sd 5:0:0:0: [sde] Attached SCSI removable disk [70479.474539] usb 1-10: USB disconnect, device number 26 [70853.497780] perf: interrupt took too long (3159 > 3142), lowering kernel.perf_event_max_sample_rate to 63000 [75945.528807] Buffer I/O error on dev sdf1, logical block 30705, lost async page write [77361.134649] FAT-fs (sdf1): bread failed in fat_clusters_flush [78713.200019] usb 1-6.1: USB disconnect, device number 5 [78713.213653] wlp0s20f0u6u1: deauthenticating from XXX by local choice (Reason: 3=DEAUTH_LEAVING) [78713.316759] ath: phy0: Chip reset failed [78713.316763] ath: phy0: Unable to reset channel (2462 Mhz) reset status -22 [78713.316766] ath: phy0: Unable to set channel [78713.326860] ath: phy0: Failed to wakeup in 500us [78713.337339] ath: phy0: Failed to wakeup in 500us [78713.347428] ath: phy0: Failed to wakeup in 500us [78713.370769] usb 1-6.1: ath9k_htc: USB layer deinitialized [78716.281634] usb 1-6.1: new high-speed USB device number 27 using xhci_hcd [78716.496444] usb 1-6.1: New USB device found, idVendor=0cf3, idProduct=9271, bcdDevice= 1.08 [78716.496451] usb 1-6.1: New USB device strings: Mfr=16, Product=32, SerialNumber=... [78716.496455] usb 1-6.1: Product: USB2.0 WLAN [78716.496457] usb 1-6.1: Manufacturer: ATHEROS [78716.496460] usb 1-6.1: SerialNumber: ... [78716.500457] usb 1-6.1: ath9k_htc: Firmware ath9k_htc/htc_9271-1.4.0.fw requested [78716.834378] usb 1-6.1: ath9k_htc: Transferred FW: ath9k_htc/htc_9271-1.4.0.fw, size: 51008 [78717.086427] ath9k_htc 1-6.1:1.0: ath9k_htc: HTC initialized with 33 credits [78717.353046] ath9k_htc 1-6.1:1.0: ath9k_htc: FW Version: 1.4 [78717.353049] ath9k_htc 1-6.1:1.0: FW RMW support: On [78717.353051] ath: EEPROM regdomain: 0x809c [78717.353051] ath: EEPROM indicates we should expect a country code [78717.353053] ath: doing EEPROM country->regdmn map search [78717.353054] ath: country maps to regdmn code: 0x52 [78717.353055] ath: Country alpha2 being used: CN [78717.353056] ath: Regpair used: 0x52 [78717.360223] ath9k_htc 1-6.1:1.0 wlp0s20f0u6u1: renamed from wlan0 [78717.360281] ieee80211 phy1: Atheros AR9271 Rev:1 [78720.436119] wlp0s20f0u6u1: authenticate with XXX [78720.695784] wlp0s20f0u6u1: send auth to XXX (try 1/3) [78720.697375] wlp0s20f0u6u1: authenticated [78720.697741] wlp0s20f0u6u1: associate with XXX (try 1/3) [78720.707266] wlp0s20f0u6u1: RX AssocResp from XXX (capab=0x411 status=0 aid=3) [78720.715817] wlp0s20f0u6u1: associated [78720.724625] IPv6: ADDRCONF(NETDEV_CHANGE): wlp0s20f0u6u1: link becomes ready [78944.294357] wlp0s20f0u6u1: authenticate with XXX [78944.469934] wlp0s20f0u6u1: send auth to XXX (try 1/3) [78944.471539] wlp0s20f0u6u1: authenticated [78944.472637] wlp0s20f0u6u1: associate with XXX (try 1/3) [78944.482118] wlp0s20f0u6u1: RX AssocResp from XXX (capab=0x411 status=0 aid=3) [78944.490640] wlp0s20f0u6u1: associated [79158.305777] wlp0s20f0u6u1: authenticate with XXX [79158.480611] wlp0s20f0u6u1: send auth to XXX (try 1/3) [79158.482901] wlp0s20f0u6u1: authenticated [79158.483917] wlp0s20f0u6u1: associate with XXX (try 1/3) [79158.493394] wlp0s20f0u6u1: RX AssocResp from XXX (capab=0x411 status=0 aid=3) [79158.501921] wlp0s20f0u6u1: associated [121483.879612] wlp0s20f0u6u1: authenticate with XXX [121484.056275] wlp0s20f0u6u1: send auth to XXX (try 1/3) [121484.060730] wlp0s20f0u6u1: authenticated [121484.061272] wlp0s20f0u6u1: associate with XXX (try 1/3) [121484.072531] wlp0s20f0u6u1: RX AssocResp from XXX (capab=0x411 status=0 aid=3) [121484.080990] wlp0s20f0u6u1: associated [121534.063665] wlp0s20f0u6u1: authenticate with XXX [121534.238438] wlp0s20f0u6u1: send auth to XXX (try 1/3) [121534.240007] wlp0s20f0u6u1: authenticated [121534.240299] wlp0s20f0u6u1: associate with XXX (try 1/3) [121534.253163] wlp0s20f0u6u1: RX AssocResp from XXX (capab=0x411 status=0 aid=3) [121534.261656] wlp0s20f0u6u1: associated [121555.774675] wlp0s20f0u6u1: authenticate with XXX [121555.949379] wlp0s20f0u6u1: send auth to XXX (try 1/3) [121555.950952] wlp0s20f0u6u1: authenticated [121555.951286] wlp0s20f0u6u1: associate with XXX (try 1/3) [121555.960753] wlp0s20f0u6u1: RX AssocResp from XXX (capab=0x411 status=0 aid=3) [121555.969211] wlp0s20f0u6u1: associated [121560.186556] wlp0s20f0u6u1: authenticate with XXX [121560.361177] wlp0s20f0u6u1: send auth to XXX (try 1/3) [121560.364605] wlp0s20f0u6u1: authenticated [121560.365267] wlp0s20f0u6u1: associate with XXX (try 1/3) [121560.376912] wlp0s20f0u6u1: RX AssocResp from XXX (capab=0x411 status=0 aid=3) [121560.385415] wlp0s20f0u6u1: associated [121767.817620] wlp0s20f0u6u1: authenticate with XXX [121767.994639] wlp0s20f0u6u1: send auth to XXX (try 1/3) [121768.000278] wlp0s20f0u6u1: send auth to XXX (try 2/3) [121768.001022] wlp0s20f0u6u1: authenticated [121768.001358] wlp0s20f0u6u1: associate with XXX (try 1/3) [121768.019518] wlp0s20f0u6u1: associate with XXX (try 2/3) [121768.028930] wlp0s20f0u6u1: RX AssocResp from XXX (capab=0x411 status=0 aid=3) [121768.037383] wlp0s20f0u6u1: associated [129708.125682] sdd: sdd1 [129720.839295] sdd: sdd1 [129720.841566] sdd: sdd1 [132867.861147] usb 2-9: USB disconnect, device number 2 [136328.164420] st: Version 20160209, fixed bufsize 32768, s/g segs 256